Skip to main content

DESARROLLO Y ANALISIS DE FORMULACIONES HDG PARA PROBLEMAS HETEROGENEOS EN DINAMICA DE FLUIDOS COMPUTACIONAL (DAFOH2)

MTM2013-46313-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Coupling of continuous and HDG methods

  • Paipuri, Mahendra
  • Tiago, Carlos
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. The influence of the tau parameter on the coupled formulation is studied., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Comparison of continuous and hybridizable discontinuous Galerkin methods in incompressible fluid flow problems

  • Fernández Méndez, Sonia|||0000-0002-9305-7684
A comparison of the computational efficiency between Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods is presented for the solution of the incompressible Stokes and Navier–Stokes equations. Both methods are implemented under the same platform and study is made in terms of CPU time and accuracy for steady state problems using triangular and quadrilateral elements. Several plots like error vs. CPU time of the linear solver, error vs. ratio of CPU times of HDG to CG, etc. are presented. The results suggest that HDG is computationally more efficient than CG for high degree of approximation, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Adaptive refinement for phase-field models of brittle fracture based on Nitsche's method

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
  • Rodríguez Ferran, Antonio|||0000-0002-9680-6046
“This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-020-01841-1”., A new adaptive refinement strategy for phase-field models of brittle fracture is proposed. The approach provides a computationally efficient solution to the high demand in spatial resolution of phase-field models. The strategy is based on considering two types of elements: h-refined elements along cracks, where more accuracy is needed to capture the solution, and standard elements in the rest of the domain. Continuity between adjacent elements of different type is imposed in weak form by means of Nitsche's method. The weakly imposition of continuity leads to a very local refinement in a simple way, for any degree of approximation and both in 2D and 3D. The performance of the strategy is assessed for several scenarios in the quasi-static regime, including coalescence and branching of cracks in 2D and a twisting crack in 3D., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

eXtended hybridizable discontinuous Galerkin for incompressible flow problems with unfitted meshes and interfaces

  • Gürkan, Ceren
  • Kronbichler, Martin
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
The eXtended hybridizable discontinuous Galerkin (X-HDG) method is developed for the solution of Stokes problems with void or material interfaces. X-HDG is a novel method that combines the hybridizable discontinuous Galerkin (HDG) method with an eXtended finite element strategy, resulting in a high-order, unfitted, superconvergent method, with an explicit definition of the interface geometry by means of a level-set function. For elements not cut by the interface, the standard HDG formulation is applied, whereas a modified weak form for the local problem is proposed for cut elements. Heaviside enrichment is considered on cut faces and in cut elements in the case of bimaterial problems. Two-dimensional numerical examples demonstrate that the applicability, accuracy, and superconvergence properties of HDG are inherited in X-HDG, with the freedom of computational meshes that do not fit the interfaces, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A hybridizable discontinuous Galerkin phase-field model for brittle fracture with adaptive refinement

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Rodríguez Ferran, Antonio|||0000-0002-9680-6046
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
This is the peer reviewed version of the following article: Muixi, A.; Rodriguez-Ferran, A.; Fernandez, S. A hybridizable discontinuous Galerkin phase-field model for brittle fracture with adaptive refinement. "International journal for numerical methods in engineering", 30 Març 2020, vol. 121, núm. 6, p. 1147-1169, which has been published in final form at DOI: 10.1002/nme.6260. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this paper, we propose an adaptive refinement strategy for phase-field models of brittle fracture, which is based on a novel hybridizable discontinuous Galerkin (HDG) formulation of the problem. The adaptive procedure considers standard elements and only one type of h-refined elements, dynamically located along the propagating cracks. Thanks to the weak imposition of interelement continuity in HDG methods, and in contrast with other existing adaptive approaches, hanging nodes or special transition elements are not needed, which simplifies the implementation. Various numerical experiments, including one branching test, show the accuracy, robustness, and applicability of the presented approach to quasistatic phase-field simulations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparison of high-order continuous and hybridizable discontinuous {G}alerkin methods in incompressible fluid flow problems

  • Paipuri, Mahendra
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
  • Tiago, Carlos
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The computational efficiency and the stability of Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods are compared for the solution of the incompressible Stokes and Navier–Stokes equations at low Reynolds numbers using direct solvers. A thorough comparison in terms of CPU time and accuracy for both discretization methods is made, under the same platform, for steady state problems, with triangular and quadrilateral elements of degree . Various results are presented such as error vs. CPU time of the direct solver, error vs. ratio of CPU times of HDG to CG, etc. CG can outperform HDG when the CPU time, for a given degree and mesh, is considered. However, for high degree of approximation, HDG is computationally more efficient than CG, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree. Finally, stability of HDG and CG is studied using a manufactured solution that produces a sharp boundary layer, confirming that HDG provides smooth converged solutions for Reynolds numbers higher than CG, in the presence of sharp fronts., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Coupling of continuous and hybridizable discontinuous Galerkin methods: application to conjugate heat transfer problem

  • Paipuri, Mahendra
  • Tiago, C.
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
The final publication is available at link.springer.com, A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. Afterwards, the solution of the coupled Navier–Stokes/convection–diffusion problem, using Boussinesq approximation, is formulated within the HDG framework and analysed using numerical experiments. Results of Rayleigh–Bénard convection flow are also presented and validated with literature data. Finally, the proposed coupled formulation between HDG and CG for heat equation is combined with the coupled Navier–Stokes/convection diffusion equations to formulate a new CG–HDG model for solving conjugate heat transfer problems. Benchmark examples are solved using the proposed model and validated with literature values. The proposed CG–HDG model is also compared with a CG–CG model, where all the equations are discretized using the CG method, and it is concluded that CG–HDG model can have a superior computational efficiency when compared to CG–CG model., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A combined XFEM phase-field computational model for crack growth without remeshing

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Marco Alacid, Onofre
  • Rodríguez Ferran, Antonio|||0000-0002-9680-6046
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-020-01929-8, This paper presents an adaptive strategy for phase-field simulations with transition to fracture. The phase-field equations are solved only in small subdomains around crack tips to determine propagation, while an XFEM discretization is used in the rest of the domain to represent sharp cracks, enabling to use a coarser discretization and therefore reducing the computational cost. Crack-tip subdomains move as cracks propagate in a fully automatic process. The same computational mesh is used during all the simulation, with an h-refined approximation in the elements in the crack-tip subdomains. Continuity of the displacement between the refined subdomains and the XFEM region is imposed in weak form via Nitsche’s method. The robustness of the strategy is shown for some numerical examples in 2D and 3D, including branching and coalescence tests., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part I

  • Arias Calderón, Santiago|||0000-0001-9233-0178
  • Villardi de Montlaur, Adeline de|||0000-0002-0243-668X
This work presents a 3D numerical study of the bubble generation process into a bubble generator obtained with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7, and its comparison with experimental data reproducing the same conditions. The bubble generator is formed by two perpendicular capillaries in which liquid and gas are injected at perpendicular directions into a 1 mm internal diameter capillary T-junction with a total length of 10 mm. The fluids used in experiments and CFD simulations are air and water, both of them considered incompressible and isothermal, at a room temperature of 25º. A total of 23 different cases are studied for different injection conditions, and results between numerical simulations and experiments are compared. In this first part of the analysis, we focus on the flow pattern regimes and the dynamics of the bubble generation process. In addition to the new numerical simulations presented here, a new model has been used to predict the bubble generation frequency and tested with both experimental and numerical data. Results on bubble generation frequency are also presented by means of the non-dimensional Strouhal number. Same types of patterns, bubble and slug flow regimes, are obtained in simulations and experiments. In order to perform an exhaustive validation and comparison of numerical simulations with experimental data, several parameters have been selected: bubble velocity, volumetric void fraction, bubble generation frequency, Strouhal number and bubble equivalent diameter. Numerical simulations agree qualitatively, but not always quantitatively, with experimental results., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A combined XFEM phase-field computational model for crack growth without remeshing

  • Muixí Ballonga, Alba
  • Marco Alacid, Onofre
  • Rodríguez Ferran, Antonio
  • Fernández Méndez, Sonia
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-020-01929-8, This paper presents an adaptive strategy for phase-field simulations with transition to fracture. The phase-field equations are solved only in small subdomains around crack tips to determine propagation, while an XFEM discretization is used in the rest of the domain to represent sharp cracks, enabling to use a coarser discretization and therefore reducing the computational cost. Crack-tip subdomains move as cracks propagate in a fully automatic process. The same computational mesh is used during all the simulation, with an h-refined approximation in the elements in the crack-tip subdomains. Continuity of the displacement between the refined subdomains and the XFEM region is imposed in weak form via Nitsche’s method. The robustness of the strategy is shown for some numerical examples in 2D and 3D, including branching and coalescence tests., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

eXtended hybridizable discontinuous Galerkin for incompressible flow problems with unfitted meshes and interfaces

  • Gürkan, Ceren
  • Kronbichler, Martin
  • Fernández Méndez, Sonia
The eXtended hybridizable discontinuous Galerkin (X-HDG) method is developed for the solution of Stokes problems with void or material interfaces. X-HDG is a novel method that combines the hybridizable discontinuous Galerkin (HDG) method with an eXtended finite element strategy, resulting in a high-order, unfitted, superconvergent method, with an explicit definition of the interface geometry by means of a level-set function. For elements not cut by the interface, the standard HDG formulation is applied, whereas a modified weak form for the local problem is proposed for cut elements. Heaviside enrichment is considered on cut faces and in cut elements in the case of bimaterial problems. Two-dimensional numerical examples demonstrate that the applicability, accuracy, and superconvergence properties of HDG are inherited in X-HDG, with the freedom of computational meshes that do not fit the interfaces, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coupling of continuous and hybridizable discontinuous Galerkin methods: application to conjugate heat transfer problem

  • Paipuri, Mahendra
  • Tiago, C.
  • Fernández Méndez, Sonia
The final publication is available at link.springer.com, A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. Afterwards, the solution of the coupled Navier–Stokes/convection–diffusion problem, using Boussinesq approximation, is formulated within the HDG framework and analysed using numerical experiments. Results of Rayleigh–Bénard convection flow are also presented and validated with literature data. Finally, the proposed coupled formulation between HDG and CG for heat equation is combined with the coupled Navier–Stokes/convection diffusion equations to formulate a new CG–HDG model for solving conjugate heat transfer problems. Benchmark examples are solved using the proposed model and validated with literature values. The proposed CG–HDG model is also compared with a CG–CG model, where all the equations are discretized using the CG method, and it is concluded that CG–HDG model can have a superior computational efficiency when compared to CG–CG model., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A hybridizable discontinuous Galerkin phase-field model for brittle fracture with adaptive refinement

  • Muixí Ballonga, Alba
  • Rodríguez Ferran, Antonio
  • Fernández Méndez, Sonia
This is the peer reviewed version of the following article: Muixi, A.; Rodriguez-Ferran, A.; Fernandez, S. A hybridizable discontinuous Galerkin phase-field model for brittle fracture with adaptive refinement. "International journal for numerical methods in engineering", 30 Març 2020, vol. 121, núm. 6, p. 1147-1169, which has been published in final form at DOI: 10.1002/nme.6260. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this paper, we propose an adaptive refinement strategy for phase-field models of brittle fracture, which is based on a novel hybridizable discontinuous Galerkin (HDG) formulation of the problem. The adaptive procedure considers standard elements and only one type of h-refined elements, dynamically located along the propagating cracks. Thanks to the weak imposition of interelement continuity in HDG methods, and in contrast with other existing adaptive approaches, hanging nodes or special transition elements are not needed, which simplifies the implementation. Various numerical experiments, including one branching test, show the accuracy, robustness, and applicability of the presented approach to quasistatic phase-field simulations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Coupling of continuous and HDG methods

  • Paipuri, Mahendra
  • Tiago, Carlos
  • Fernández Méndez, Sonia
A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. The influence of the tau parameter on the coupled formulation is studied., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part I

  • Arias Calderón, Santiago
  • Villardi de Montlaur, Adeline de
This work presents a 3D numerical study of the bubble generation process into a bubble generator obtained with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7, and its comparison with experimental data reproducing the same conditions. The bubble generator is formed by two perpendicular capillaries in which liquid and gas are injected at perpendicular directions into a 1 mm internal diameter capillary T-junction with a total length of 10 mm. The fluids used in experiments and CFD simulations are air and water, both of them considered incompressible and isothermal, at a room temperature of 25º. A total of 23 different cases are studied for different injection conditions, and results between numerical simulations and experiments are compared. In this first part of the analysis, we focus on the flow pattern regimes and the dynamics of the bubble generation process. In addition to the new numerical simulations presented here, a new model has been used to predict the bubble generation frequency and tested with both experimental and numerical data. Results on bubble generation frequency are also presented by means of the non-dimensional Strouhal number. Same types of patterns, bubble and slug flow regimes, are obtained in simulations and experiments. In order to perform an exhaustive validation and comparison of numerical simulations with experimental data, several parameters have been selected: bubble velocity, volumetric void fraction, bubble generation frequency, Strouhal number and bubble equivalent diameter. Numerical simulations agree qualitatively, but not always quantitatively, with experimental results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison of high-order continuous and hybridizable discontinuous {G}alerkin methods in incompressible fluid flow problems

  • Paipuri, Mahendra
  • Fernández Méndez, Sonia
  • Tiago, Carlos
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The computational efficiency and the stability of Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods are compared for the solution of the incompressible Stokes and Navier–Stokes equations at low Reynolds numbers using direct solvers. A thorough comparison in terms of CPU time and accuracy for both discretization methods is made, under the same platform, for steady state problems, with triangular and quadrilateral elements of degree . Various results are presented such as error vs. CPU time of the direct solver, error vs. ratio of CPU times of HDG to CG, etc. CG can outperform HDG when the CPU time, for a given degree and mesh, is considered. However, for high degree of approximation, HDG is computationally more efficient than CG, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree. Finally, stability of HDG and CG is studied using a manufactured solution that produces a sharp boundary layer, confirming that HDG provides smooth converged solutions for Reynolds numbers higher than CG, in the presence of sharp fronts., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Comparison of continuous and hybridizable discontinuous Galerkin methods in incompressible fluid flow problems

  • Fernández Méndez, Sonia
A comparison of the computational efficiency between Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods is presented for the solution of the incompressible Stokes and Navier–Stokes equations. Both methods are implemented under the same platform and study is made in terms of CPU time and accuracy for steady state problems using triangular and quadrilateral elements. Several plots like error vs. CPU time of the linear solver, error vs. ratio of CPU times of HDG to CG, etc. are presented. The results suggest that HDG is computationally more efficient than CG for high degree of approximation, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Adaptive refinement for phase-field models of brittle fracture based on Nitsche's method

  • Muixí Ballonga, Alba
  • Fernández Méndez, Sonia
  • Rodríguez Ferran, Antonio
“This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-020-01841-1”., A new adaptive refinement strategy for phase-field models of brittle fracture is proposed. The approach provides a computationally efficient solution to the high demand in spatial resolution of phase-field models. The strategy is based on considering two types of elements: h-refined elements along cracks, where more accuracy is needed to capture the solution, and standard elements in the rest of the domain. Continuity between adjacent elements of different type is imposed in weak form by means of Nitsche's method. The weakly imposition of continuity leads to a very local refinement in a simple way, for any degree of approximation and both in 2D and 3D. The performance of the strategy is assessed for several scenarios in the quasi-static regime, including coalescence and branching of cracks in 2D and a twisting crack in 3D., Peer Reviewed, Postprint (author's final draft)