Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chemical strain and oxidation-reduction kinetics of epitaxial thin films of mixed ionic-electronic conducting oxides determined by x-ray diffraction

  • Moreno, Roberto
  • Zapata Correa, James Arturo
  • Roqueta, Jaume
  • Bagués, Núria|||0000-0002-9360-0915
  • Santiso, José|||0000-0003-4274-2101
X-ray diffraction, at high T's and switching between N/air atmospheres, was used to compare the chemical expansion due oxygen non-stoichiometry variations between epitaxial films of different mixed ionic-electronic conductors: LaSrCoO(LSC), BaSrCoFeO(BSCF), LaNiO(LNO), LaNiO(L2NO) and GaBaCoO(GBCO) and LaSrMnO(LSM). LSC and BSCF show the largest relative change in the cell parameter Δc/c = +0.5%, while L2NO and GBCO show negative Δc/c = -0.2% and -0.1%, respectively. LNO and LSM show either reduced or negligible chemical expansions. In all cases the values correspond to their particular defect equilibrium and degree of charge localization. The oxygen surface exchange kinetics was also evaluated from in-situ time-resolved analyses of the cell parameter variations. LSC, LNO and GBCO films show fast oxygen reduction kinetics, k = 5·10, 3·10, and 2·10 cm/s at 700°C, respectively, in relative agreement with reported values, while BSCF films show much slower kinetics than expected, below kchem = 10 cm/s at 650°C, related to the degradation process observed in the films.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-Arranged Misfit Dislocation Network Formation upon Strain Release in La0.7Sr0.3MnO3/LaAlO3(100) Epitaxial Films under Compressive Strain

  • Santiso, José|||0000-0003-4274-2101
  • Roqueta, Jaume
  • Bagués, Núria|||0000-0002-9360-0915
  • Frontera, Carlos|||0000-0002-0091-4756
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Lu, Qiyang
  • Yildiz, Bilge
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optimisation of growth parameters to obtain epitaxial Y-doped BaZrO3 proton conducting thin films

  • Magrasó, Anna|||0000-0001-5123-4809
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Rodríguez Lamas, Raquel|||0000-0002-0137-8174
  • Sunding, M. F.
  • Santiso, José|||0000-0003-4274-2101
We hereby report developments on the fabrication and characterization of epitaxial thin films of proton conducting Y-doped BaZrO (BZY) by pulsed laser deposition (PLD) on different single crystal substrates (MgO, GdScO, SrTiO, NdGaO, LaAlO and sapphire) using Ni-free and 1% Ni-containing targets. Pure, high crystal quality epitaxial films of BZY are obtained on MgO and on perovskite-type substrates, despite the large lattice mismatch. The deposition conditions influence the morphology, cell parameters and chemical composition of the film, the oxygen partial pressure during film growth being the most determining. Film characterization was carried out using X-ray diffraction, transmission electron and atomic force microscopies, wavelength dispersive X-ray spectroscopy and angle-resolved X-ray photoelectron spectroscopy. All films show a slight tetragonal distortion that is not directly related to the substrate-induced strain. The proton conductivity of the films depends on deposition conditions and film thickness, and for the optimised conditions its total conductivity is slightly higher than the bulk conductivity of the target material (3 mS/cm at 600 °C, in wet 5% H/Ar). The conductivities are, however, more than one order of magnitude lower than the highest reported in literature and possible reasoning is elucidated in terms of local and extended defects in the films.