Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Above-Bandgap Photovoltages in Antiferroelectrics

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Catalan, Gustau|||0000-0003-0214-4828
The closed circuit photocurrent and open circuit photovoltage of antiferroelectric thin films were characterized both in their ground (antipolar) state and in their polarized state. A sharp transition happens from near zero to large photovoltages as the polarization is switched on, consistent with the activation of the bulk photovoltaic effect. The AFE layers have been grown by a solution processing method (sol?gel synthesis followed by spin coating deposition) onto fluorine-doped tin oxide (FTO), a transparent conducting oxide with low sheet resistance and a higher resilience to high-temperature processing than indium tin oxide and a standard for solar cells such as organometal trihalide perovskites. Light absorption confirmed that the PZO films are, as expected, wide-band gap semiconductors with a gap of 3.7.8 eV and thus highly absorbing in the near-ultraviolet range. On a virgin sample, there is no shortcircuit photocurrent, consistent with the antipolar nature of the ground state. As an external bias voltage is applied, the current remains negligible until suddenly, at the coercive voltage, a spike is observed, corresponding to the transient displacement current caused by the onset of polarization.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer, An outdoor stability study

  • Lima, F. Anderson S.
  • Beliatis, Michail J.|||0000-0002-7902-6144
  • Roth, Bérenger
  • Andersen, Thomas R.|||0000-0003-0180-1443
  • Bortoti, Andressa
  • Reyna, Yegraf
  • Castro, Eryza
  • Vasconcelos, Igor F.|||0000-0002-6172-805X
  • Gevorgyan, Suren A.|||0000-0001-9906-5485
  • Krebs, Frederik C.|||0000-0003-1148-4314
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed V2O5 as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configurationwas PET/Ag/PEDOT/ZnO/P3HT:PC60BM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed V2O5.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of cs-incorporated NiOx on the performance of perovskite solar cells

  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Seo, Ji-Youn
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
The effect of Cs-incorporated NiO on perovskite solar cells with an inverted structure was investigated, where NiO and PCBM were used as selective contacts for holes and electrons, respectively. It was found that the generation of an Ni phase in an NiO layer was significantly suppressed by employing cesium. Furthermore, Cs-incorporated NiO enabled holes to be efficiently separated at the interface, showing the improved photoluminescent quenching and thus generating higher short-circuit current. The effect of Cs incorporation was also prominent in the inhibition of recombination. The recombination resistance of Cs-incorporated NiO was noticeably increased by more than three-fold near the maximum power point leading to a higher fill factor of 0.78 and consequently a higher power conversion efficiency of 17.2% for the device employing Cs-incorporated NiO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Baselines for Lifetime of Organic Solar Cells

  • Gevorgyan, Suren A.|||0000-0001-9906-5485
  • Espinosa, Nieves
  • Ciammaruchi, Laura
  • Roth, Bérenger
  • Livi, Francesco
  • Tsopanidis, Stylianos
  • Züfle, Simon
  • Queirós, Sara
  • Gregori, Alberto
  • Benatto, Gisele Alves Dos Reis
  • Corazza, M.
  • Madsen, Morten Vesterager|||0000-0002-6838-9708
  • Hösel, Markus
  • Beliatis, Michail J.|||0000-0002-7902-6144
  • Larsen-Olsen, Thue T.
  • Pastorelli, Francesco
  • Castro, António
  • Mingorance, Alba
  • Lenzi, Veniero|||0000-0002-3633-1966
  • Fluhr, Daniel
  • Roesch, Roland
  • Duarte Ramos, Marta Maria
  • Savva, Achilleas
  • Hoppe, Harald
  • Marques, Luis Silvino Alves
  • Burgués Ceballos, Ignasi
  • Georgiou, Efthymios
  • Serrano Luján, Lucía
  • Krebs, Frederik C.|||0000-0003-1148-4314
The process of accurately gauging lifetime improvements in organic photovoltaics (OPVs) or other similar emerging technologies, such as perovskites solar cells is still a major challenge. The presented work is part of a larger effort of developing a worldwide database of lifetimes that can help establishing reference baselines of stability performance for OPVs and other emerging PV technologies, which can then be utilized for pass-fail testing standards and predicting tools. The study constitutes scanning of literature articles related to stability data of OPVs, reported until mid-2015 and collecting the reported data into a database. A generic lifetime marker is utilized for rating the stability of various reported devices. The collected data is combined with an earlier developed and reported database, which was based on articles reported until mid-2013. The extended database is utilized for establishing the baselines of lifetime for OPVs tested under different conditions. The work also provides the recent progress in stability of unencapsulated OPVs with different architectures, as well as presents the updated diagram of the reported record lifetimes of OPVs. The presented work is another step forward towards the development of pass-fail testing standards and lifetime prediction tools for emerging PV technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lima, F. Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalan, Gustau|||0000-0003-0214-4828
  • Lira-Cantu, Monica|||0000-0002-3393-7436
This study presents a new self-powered electronic transistor concept "the solar transistor." The transistor effect is enabled by the functional integration of a ferroelectric-oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two-terminal solar-powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Procedures and practices for evaluating thin-film solar cell stability

  • Roesch, Roland
  • Faber, Tobias
  • Von Hauff, Elizabeth
  • Brown, Thomas M.
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Hoppe, Harald
During the last few decades, and in some cases only the last few years, novel thin-film photovoltaic (PV) technologies such as dye-sensitized solar cells (DSSC), organic solar cells (OPV), and, more recently, perovskite-based solar cells (PSC) have been growing in maturity with respect to device performance and device stability. Together with new material systems, novel device architectures have also been introduced. Both parameters will have an effect on the overall device stability. In order to improve the understanding of degradation effects and how they can be prevented, stress testing under different conditions is commonly applied. By careful combination of stress factors and thorough analysis of photovoltaic parameter decaying curves, an understanding of the underlying degradation pathways can be gained. With the help of standardized and accelerated stress tests, as described in the ISOS-protocols, statements concerning application lifetimes can finally be made and compared among different labs. Once a photovoltaic technology has proven long lasting durability, the ultimate barrier for entering the commercial market are the IEC tests, taking a deeper look on overall safety and reliability, not only on durability. Here, the most prominent stress tests are reviewed, discussed and extended with respect to learning the most about photovoltaic device stability. Common procedures and practices for evaluating thin-film solar cell stability and durability are reviewed with respect to their applicability for predicting failure routes and application lifetimes. Suggestions for the reporting of detailed stress factors, photovoltaic parameters with sufficient statistical weight, and new figures of merit are made with the goal of steepening the learning curve towards real applications.