Skip to main content

ESTRESTRONICA DE OXIDOS

FIS2013-48668-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large Flexoelectric Anisotropy in Paraelectric Barium Titanate

  • Narváez, Jackeline
  • Saremi, Sahar
  • Hong, Jiawang
  • Stengel, Massimiliano
  • Catalán, Gustau
Narvaez, Jackeline et. al., The bending-induced polarization of barium titanate single crystals has been measured with an aim to elucidate the origin of the large difference between theoretically predicted and experimentally measured flexoelectricity in this material. The results indicate that part of the difference is due to polar regions (short-range order) that exist above TC and up to T∗≈200–225 °C. Above T∗, however, the flexovoltage coefficient still shows an unexpectedly large anisotropy for a cubic material, with (001)-oriented crystals displaying 10 times more flexoelectricity than (111)-oriented crystals. Theoretical analysis shows that this anisotropy cannot be a bulk property, and we therefore interpret it as indirect evidence for the theoretically predicted but experimentally elusive contribution of surface piezoelectricity to macroscopic bending-induced polarization., This research has been funded by an ERC Starting grant from the EU (ERC 308023) and by National Plan Grants No. FIS2013-48668-C2-1-P and No. FIS2013-48668-C2-2-P from the Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanics of flexoelectric switching

  • Očenášek, J.
  • Lu, H.
  • Bark, C. W.
  • Eom, C. B.
  • Alcalá, Jorge
  • Catalán, Gustau
  • Gruverman, Alexei
Očenášek, J. et. al., We examine the phenomenon of flexoelectric switching of polarization in ultrathin films of barium titanate induced by a tip of an atomic force microscope (AFM). The spatial distribution of the tip-induced flexoelectricity is computationally modeled both for perpendicular mechanical load (point measurements) and for sliding load (scanning measurements), and compared with experiments. We find that (i) perpendicular load does not lead to stable ferroelectric switching in contrast to the load applied in the sliding contact load regime, due to nontrivial differences between the strain distributions in both regimes: ferroelectric switching for the perpendicular load mode is impaired by a strain gradient inversion layer immediately underneath the AFM tip; while for the sliding load regime, domain inversion is unimpaired within a greater material volume subjected to larger values of the mechanically induced electric field that includes the region behind the sliding tip; (ii) beyond a relatively small value of an applied force, increasing mechanical pressure does not increase the flexoelectric field inside the film, but results instead in a growing volume of the region subjected to such field that aids domain nucleation processes; and (iii) the flexoelectric coefficients of the films are of the order of few nC/m, which is much smaller than for bulk BaTiO3 ceramics, indicating that there is a “flexoelectric size effect” that mirrors the ferroelectric one., The work at the UNL was supported by the National Science Foundation (NSF) through the Nebraska Materials Research Science and Engineering Center (MRSEC) under Grant No. DMR-1420645 (PFM experiments) and by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Division of Materials Sciences and Engineering, under Award No. DE-SC0004876 (fabrication of thin films). The work of G.C. is financially supported by an ERC grant (Project No. 308023), by a National Plan grant (Grant No. FIS2013-48668-C2-1-P), and by the Severo Ochoa Excellence programme. Further financial support was provided by Ministerio de Economía y Competitividad Grant No. MAT2011-23375 (Spain) to J.A. and by CENTEM projects CZ.1.05/2.1.00/03.0088 and PLUS LO1402 (Czech Republic) to J.O., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr2IrO4 thin films

  • Domingo, Neus
  • López Mir, Laura
  • Paradinas, Markos
  • Ocal, Carmen
  • Martí, Xavier
  • Catalán, Gustau
This article has been highlighted as "Hot Paper" in Nanoscale.-- Domingo, Neus et al., Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin–orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr2IrO4. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices., N.D wants to acknowledge the Spanish Ministerio de Ciencia e Innovación for a Ramon y Cajal research grant RYC-2010-06365. X.M. acknowledges the Grant Agency of the Czech Republic No. P204/11/P339. G.C. acknowledges ERC Starting Grant 308023. T.J. acknowledges ERC Advanced Grant 268066 and Praemium Academiae of the Academy of Sciences of the Czech Republic. Di Yi was sponsored by the National Science Foundation through the Penn State MRSEC. J.L. is supported by the Director, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 through the Quantum Material program in the Materials Sciences Division of Lawrence Berkeley National Laboratory. Financial support has been obtained under projects from the Spanish Ministerio de Economía y Competitividad under projects MAT2010-17771, MAT2010-20020, MAT2013-47869-C4-1-P, FIS2013-48668-C2-1-P and NANOSELECT CSD2007-00041 and Severo Ochoa Excellence Programme 2013-0295, and the Generalitat de Catalunya under projects 2014 SGR 733 and 2014 SGR 1216., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano-Escobal, Irati
  • Gonzalez Rosillo, Juan Carlos
  • Domingo, Neus
  • Illa, Xavi
  • López-Barbera, José Francisco
  • Fornell, Jordina
  • Suriñach, Santiago
  • Baró, María Dolors
  • Puig Molina, Teresa
  • Pané, Salvador
  • Nogués, Josep
  • Sort, Jordi
Golvano-Escobal, Irati et al., Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks that are commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-1216 and 2014-SGR-753 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R, MAT2014-51778-C2-1-R and FIS2013-48668-C2-1-P from the Spanish Ministerio de Economía y Competitividad (MINECO) and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER). Dr. Eva Pellicer and Dr. Neus Domingo are also grateful to MINECO for the “Ramon y Cajal” contracts (RYC-2012-10839 and RYC-2010-06365 respectively). ICN2 and ICMAB acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295 and Grant SEV-2015-0496, respectively). The PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Monolithic integration of roomtemperature multifunctional BaTiO3-CoFe2O4 epitaxial heterostructures on Si(001)

  • Scigaj, Mateusz
  • Dix, Nico
  • Gázquez, Jaume
  • Varela, María
  • Fina, Ignasi
  • Domingo, Neus
  • Herranz, Gervasi
  • Skumryev, Vassil
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe2O4/BaTiO3 bilayers are integrated with Si(001) using LaNiO3/CeO2/YSZ as a tri-layer buffer. They present structural and functional properties close to those achieved on perovskite substrates: the bilayers are fully epitaxial with extremely flat surface, and exhibit robust ferromagnetism and ferroelectricity at room temperature., Financial support by the Spanish Government (projects MAT2014-56063-C2-1-R and FIS2013-48668-C2-1-P) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). IF acknowledges Beatriu de Pinós postdoctoral scholarship (2011 BP-A 00220 and 2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya and Juan de la Cierva - Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. MS acknowledges the FPU grant and JG acknowledges RyC contract (2012–11709) from the Spanish Government. Electron microscopy observations carried out at the ICTS-CNME at UCM. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. Research at UCM was sponsored by Spanish MINECO MAT2015-66888-C3-3-R and Fundación BBVA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A flexoelectric microelectromechanical system on silicon

  • Bhaskar, Umesh
  • Catalán, Gustau
Letter.-- et al., Flexoelectricity allows a dielectric material to polarize in response to a mechanical bending moment and, conversely, to bend in response to an electric field. Compared with piezoelectricity, flexoelectricity is a weak effect of little practical significance in bulk materials. However, the roles can be reversed at the nanoscale. Here, we demonstrate that flexoelectricity is a viable route to lead-free microelectromechanical and nanoelectromechanical systems. Specifically, we have fabricated a silicon-compatible thin-film cantilever actuator with a single flexoelectrically active layer of strontium titanate with a figure of merit (curvature divided by electric field) of 3.33 MV−1, comparable to that of state-of-the-art piezoelectric bimorph cantilevers., The work at ICN2 was funded by an ERC Starting Grant from the EU (Project No. 308023), a National Plan grant from Spain (FIS2013-48668-C2-1-P) and the Severo Ochoa Excellence programme. The work at Cornell University was supported by the National Science Foundation (Nanosystems Engineering Research Center for Translational Applications of Nanoscale Multiferroic Systems) under grant number EEC-1160504., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Above-bandgap photovoltages in antiferroelectrics

  • Pérez-Tomás, Amador
  • Lira-Cantú, Mónica
  • Catalán, Gustau
The first antiferroelectric solar cell is presented. This study shows that antiferroelectric thin-film photovoltaic current can be switched on when biased into the polar phase to generate abovebandgap photovoltages in excess of 100 V and photovoltaic fields of several megavolts per centimeter, the largest ever measured for any material., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, and the grants ENE2013-48816-C5-4-R and FIS2013-48668-C2-1-P. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212 and 1216-F. To the COST Action StableNextSol project MP1307; and to the European Research Council (ERC) Starting Grant, project No. 308023., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced flexoelectric-like response in oxide semiconductors

  • Narváez, Jackeline
  • Vasquez-Sancho, Fabian
  • Catalán, Gustau
Flexoelectricity is a property of all dielectric materials whereby they polarize in response to deformation gradients such as those produced by bending. Although it is generally thought of as a property of dielectric insulators, insulation is not a formal requirement: in principle, semiconductors can also redistribute their free charge in response to strain gradients. Here we show that bending a semiconductor not only generates a flexoelectric-like response, but that this response can in fact be much larger than in insulators. By doping single crystals of wide-bandgap oxides to increase their conductivity, their effective flexoelectric coefficient was increased by orders of magnitude. This large response can be explained by a barrier-layer mechanism that remains important even at the macroscale, where conventional (insulator) flexoelectricity otherwise tends to be small. Our results open up the possibility of using semiconductors as active ingredients in electromechanical transducer applications., This research was funded by an ERC Starting grant from the EU (ERC 308023) and by a national research grant (FIS2013-48668-C2-1-P) from the Spanish MINECO. All research in ICN2 is supported by the Severo Ochoa Excellence Programme (SEV-2013-0295). F.V.-S. thanks MICITT and CONICIT for support during his PhD., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexoelectric MEMS: Towards an electromechanical strain diode

  • Bhaskar, Umesh
  • Banerjee, N.
  • Abdollahi, Amir
  • Solanas, E.
  • Rijnders, G.
  • Catalán, Gustau
Piezoelectricity and flexoelectricity are two independent but not incompatible forms of electromechanical response exhibited by nanoscale ferroelectrics. Here, we show that flexoelectricity can either enhance or suppress the piezoelectric response of the cantilever depending on the ferroelectric polarity and lead to a diode-like asymmetric (two-state) electromechanical response., The work was funded by an ERC Starting Grant from the EU (Project No. 308023), a National Plan grant from Spain (FIS2013-48668-C2-1-P) and the Severo Ochoa Excellence programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification of HIV-1–based virus-like particles by multifrequency atomic force microscopy

  • González-Domínguez, Irene
  • Gutiérrez-Granados, Sonia
  • Cervera, Laura
  • Gòdia, Francesc
  • Domingo, Neus
Virus-like particles (VLPs) have become a promising platform for vaccine production. VLPs are formed by structural viral proteins that inherently self-assemble when expressed in a host cell. They represent a highly immunogenic and safe vaccine platform, due to the absence of the viral genome and its high protein density. One of the most important parameters in vaccine production is the quality of the product. A related bottleneck in VLP-based products is the presence of cellular vesicles as a major contaminant in the preparations, which will require the set up of techniques allowing for specific discrimination of VLPs from host vesicular bodies. In this work novel, to our knowledge, multifrequency (MF) atomic force microscopy (AFM) has permitted full structural nanophysical characterization by its access to the virus capsid of the HIV-based VLPs. The assessment of these particles by advanced amplitude modulation-frequency modulation (AM-FM) viscoelastic mapping mode has enhanced the imaging resolution of their nanomechanical properties, opening a new window for the study of the biophysical attributes of VLPs. Finally, the identification and differentiation of HIV-based VLPs from cellular vesicles has been performed under ambient conditions, providing, to our knowledge, novel methodology for the monitoring and quality control of VLPs., This work was supported by the Plan Nacional de Investigación, Spanish Ministry of Science and Innovation (MINECO BIO2011-2330), and projects from the Spanish Ministery of Economy and Competitivity (FIS2013-48668-C2-1-P), and the Generalitat de Catalunya (2014 SGR 1216). The Catalan Institute of Nanoscience and Nanotechnology acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV2013-0295). N.D. wants to acknowledge the Spanish Ministry of Science and Innovation (Ramon y Cajal research grant RYC-2010-06365)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-cut and y-cut LiNbO3 surfaces: An ambient pressure X-ray photoelectron spectroscopy study

  • Cordero-Edwards, Kumara
  • Rodríguez, Laura
  • Calò, Annalisa
  • Esplandiú, María J.
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Domingo, Neus
  • Verdaguer, Albert
Polarization dependence of water adsorption and desorption on LiNbO surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured., This work has been partially funded by the 2014 SGR 1216 project from the Generalitat de Catalunya, the MAT2012-38319-C02-01, the FIS2013-48668-C2-1-P, and FIS2015- 73932-JIN from the Spanish Ministerio de Economia y Competitividad (MINECO). K.C-E.’s work was funded by an ERC Starting Grant from the EU (Project No. 308023). N.D. is also grateful to MINECO for the “Ramon y Cajal” contract RYC-2010-06365. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Study of ferroelectric transition of SrTi18O3 single crystal at low temperature by PFM

  • Zapata, James
  • Catalán, Gustau
  • Domingo, Neus
Resumen del póster presentado a la 10th Conferencia Fuerzas y Túnel, celebrada en Girona (España) del 5 al 7 de septiembre de 2016., STO is one of the most widely studied materials in solid state physics and chemistry not only for its subtle and complex phase transitions but also for elucidating and exploring exotic new properties. Itoh et al. showed that substitution of 18O for 16O induces ferroelectricity at temperatures below 24 K. Despite extensive studies, the exact nature of the ferroelectric phase of SrTi18O3 (18STO) is not unambiguously determined and there are also huge difficulties to determine the crystallographic symmetry of the low temperature phase, due to three kinds of nanotwinning: tetragonal ferroelastic nanodomains below 105 K, rhombohedral nanoclusters below 40 K, and orthorhombic nanodomains below Tc =24 K. In the present study, the piezoelectric coefficient d33 of a 18STO single-crystal plate (whose edges were parallel to those of [001] cubic) were investigated at temperatures between 3.5K to 150K by Piezoresponse Force Microscopy (PFM). The experiments were performed using an Attocube AFM (AttoAFM) system controlled by Nanonics electronics. Due to the interferometric detection of cantilever motion in the attoAFM, out-of-plane polarization of piezo-electric domains can be directly obtained with picometer precision, but in-plane piezoelectric signal is only accessible indirectly via crosstalk effects. Experimental d33 coefficient behavior showed two regimes below and above 30K possibly related to the phase transition. No changes around the tetragonal-cubic transition near to 105K were observed., The authors would like to acknowledge the Mineco for financial support under project FIS2013-48668-C2-1-P., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Gonzalez-Rosillo, Juan Carlos
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Illa, Xavi|||0000-0002-3212-1128
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Baró, M. D.|||0000-0002-8636-1063
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ferroelectrics as smart mechanical materials

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The mechanical properties of materials are insensitive to space inversion, even when they are crystallographically asymmetric. In practice, this means that turning a piezoelectric crystal upside down or switching the polarization of a ferroelectric should not change its mechanical response. Strain gradients, however, introduce an additional source of asymmetry that has mechanical consequences. Using nanoindentation and contact-resonance force microscopy, this study demonstrates that the mechanical response to indentation of a uniaxial ferroelectric (LiNbO₃) does change when its polarity is switched, and use this mechanical asymmetry both to quantify its flexoelectricity and to mechanically read the sign of its ferroelectric domains.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Identification of HIV-1-Based Virus-like Particles by Multifrequency Atomic Force Microscopy

  • González-Domínguez, Irene|||0000-0002-7920-5505
  • Gutiérrez Granados, Sonia
  • Cervera Gracia, Laura|||0000-0002-3639-2793
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Virus-like particles (VLPs) have become a promising platform for vaccine production. VLPs are formed by structural viral proteins that inherently self-assemble when expressed in a host cell. They represent a highly immunogenic and safe vaccine platform, due to the absence of the viral genome and its high protein density. One of the most important parameters in vaccine production is the quality of the product. A related bottleneck in VLP-based products is the presence of cellular vesicles as a major contaminant in the preparations, which will require the set up of techniques allowing for specific discrimination of VLPs from host vesicular bodies. In this work novel, to our knowledge, multifrequency (MF) atomic force microscopy (AFM) has permitted full structural nanophysical characterization by its access to the virus capsid of the HIV-based VLPs. The assessment of these particles by advanced amplitude modulation-frequency modulation (AM-FM) viscoelastic mapping mode has enhanced the imaging resolution of their nanomechanical properties, opening a new window for the study of the biophysical attributes of VLPs. Finally, the identification and differentiation of HIV-based VLPs from cellular vesicles has been performed under ambient conditions, providing, to our knowledge, novel methodology for the monitoring and quality control of VLPs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-Cut and y-Cut LiNbO3 surfaces, an ambient pressure X-ray photoelectron spectroscopy study

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Calò, Annalisa
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Polarization dependence of water adsorption and desorption on LiNbO₃ surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Above-Bandgap Photovoltages in Antiferroelectrics

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Catalan, Gustau|||0000-0003-0214-4828
The closed circuit photocurrent and open circuit photovoltage of antiferroelectric thin films were characterized both in their ground (antipolar) state and in their polarized state. A sharp transition happens from near zero to large photovoltages as the polarization is switched on, consistent with the activation of the bulk photovoltaic effect. The AFE layers have been grown by a solution processing method (sol?gel synthesis followed by spin coating deposition) onto fluorine-doped tin oxide (FTO), a transparent conducting oxide with low sheet resistance and a higher resilience to high-temperature processing than indium tin oxide and a standard for solar cells such as organometal trihalide perovskites. Light absorption confirmed that the PZO films are, as expected, wide-band gap semiconductors with a gap of 3.7.8 eV and thus highly absorbing in the near-ultraviolet range. On a virgin sample, there is no shortcircuit photocurrent, consistent with the antipolar nature of the ground state. As an external bias voltage is applied, the current remains negligible until suddenly, at the coercive voltage, a spike is observed, corresponding to the transient displacement current caused by the onset of polarization.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the persistence of polar domains in ultrathin ferroelectric capacitors

  • Zubko, Pavlo|||0000-0002-7330-3163
  • Lu, Haidong
  • Bark, C. W.
  • Martí Rovirosa, Xavier
  • Santiso, José|||0000-0003-4274-2101
  • Eom, Chang-Beom|||0000-0002-8854-1439
  • Catalan, Gustau|||0000-0003-0214-4828
  • Gruverman, A.
The instability of ferroelectric ordering in ultra-thin films is one of the most important fundamental issues pertaining realization of a number of electronic devices with enhanced functionality, such as ferroelectric and multiferroic tunnel junctions or ferroelectric field effect transistors. In this paper, we investigate the polarization state of archetypal ultrathin (several nanometres) ferroelectric heterostructures: epitaxial single-crystalline BaTiO films sandwiched between the most habitual perovskite electrodes, SrRuO, on top of the most used perovskite substrate, SrTiO. We use a combination of piezoresponse force microscopy, dielectric measurements and structural characterization to provide conclusive evidence for the ferroelectric nature of the relaxed polarization state in ultrathin BaTiO capacitors. We show that even the high screening efficiency of SrRuO electrodes is still insufficient to stabilize polarization in SrRuO/BaTiO/SrRuO heterostructures at room temperature. We identify the key role of domain wall motion in determining the macroscopic electrical properties of ultrathin capacitors and discuss their dielectric response in the light of the recent interest in negative capacitance behaviour.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Monolithic integration of room-temperature multifunctional BaTiO 3 -CoFe 2 O 4 epitaxial heterostructures on Si(001)

  • Scigaj, Mateusz|||0000-0002-8703-948X
  • Dix, Nico
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Varela del Arco, María|||0000-0002-6582-7004
  • Fina, Ignasi|||0000-0003-4182-6194
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe 2 O 4 /BaTiO 3 bilayers are integrated with Si(001) using LaNiO 3 /CeO 2 /YSZ as a tri-layer buffer. They present structural and functional properties close to those achieved on perovskite substrates: the bilayers are fully epitaxial with extremely flat surface, and exhibit robust ferromagnetism and ferroelectricity at room temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanomechanics of flexoelectric switching

  • Očenášek, Jan
  • Lu, Haidong
  • Bark, C. W.
  • Eom, Chang-Beom|||0000-0002-8854-1439
  • Alcalá, Jorge|||0000-0002-6950-5766
  • Catalan, Gustau|||0000-0003-0214-4828
  • Gruverman, A.
We examine the phenomenon of flexoelectric switching of polarization in ultrathin films of barium titanate induced by a tip of an atomic force microscope (AFM). The spatial distribution of the tip-induced flexoelectricity is computationally modeled both for perpendicular mechanical load (point measurements) and for sliding load (scanning measurements), and compared with experiments. We find that (i) perpendicular load does not lead to stable ferroelectric switching in contrast to the load applied in the sliding contact load regime, due to nontrivial differences between the strain distributions in both regimes: ferroelectric switching for the perpendicular load mode is impaired by a strain gradient inversion layer immediately underneath the AFM tip; while for the sliding load regime, domain inversion is unimpaired within a greater material volume subjected to larger values of the mechanically induced electric field that includes the region behind the sliding tip; (ii) beyond a relatively small value of an applied force, increasing mechanical pressure does not increase the flexoelectric field inside the film, but results instead in a growing volume of the region subjected to such field that aids domain nucleation processes; and (iii) the flexoelectric coefficients of the films are of the order of few nC/m, which is much smaller than for bulk BaTiO3 ceramics, indicating that there is a "flexoelectric size effect" that mirrors the ferroelectric one.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexoelectric MEMS, Towards an electromechanical strain diode

  • Bhaskar, Umesh K.
  • Banerjee, N.
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Solanas, E.
  • Rijnders, G.
  • Catalan, Gustau|||0000-0003-0214-4828
Piezoelectricity and flexoelectricity are two independent but not incompatible forms of electromechanical response exhibited by nanoscale ferroelectrics. Here, we show that flexoelectricity can either enhance or suppress the piezoelectric response of the cantilever depending on the ferroelectric polarity and lead to a diode-like asymmetric (two-state) electromechanical response.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr₂IrO₄ thin films

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • López-Mir, Laura|||0000-0002-5279-8849
  • Paradinas, Markos|||0000-0003-1006-9506
  • Holy, Vaclav
  • Železný, Jakuv
  • Yi, Di
  • Suresha, Siriyara J.
  • Liu, Jian|||0000-0003-4199-1296
  • Rayan Serrao, Claudy
  • Ramesh, Ramamoorthy
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Martí Rovirosa, Xavier
  • Catalan, Gustau|||0000-0003-0214-4828
Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin-orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr₂IrO₄. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large flexoelectric anisotropy in paraelectric Barium Titanate

  • Narvaez, Jackeline
  • Saremi, Sahar
  • Hong, Jiawang
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Catalan, Gustau|||0000-0003-0214-4828
The bending-induced polarization of barium titanate single crystals has been measured with an aim to elucidate the origin of the large difference between theoretically predicted and experimentally measured flexoelectricity in this material. The results indicate that part of the difference is due to polar regions (short-range order) that exist above TC and up to T∗≈200-225°C. Above T∗, however, the flexovoltage coefficient still shows an unexpectedly large anisotropy for a cubic material, with (001)-oriented crystals displaying 10 times more flexoelectricity than (111)-oriented crystals. Theoretical analysis shows that this anisotropy cannot be a bulk property, and we therefore interpret it as indirect evidence for the theoretically predicted but experimentally elusive contribution of surface piezoelectricity to macroscopic bending-induced polarization.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A flexoelectric microelectromechanical system on silicon

  • Bhaskar, Umesh K.
  • Banerjee, Nirupam
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Wang, Zhe
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Rijnders, Guus
  • Catalan, Gustau|||0000-0003-0214-4828
Flexoelectricity allows a dielectric material to polarize in response to a mechanical bending moment and, conversely, to bend in response to an electric field. Compared with piezoelectricity, flexoelectricity is a weak effect of little practical significance in bulk materials. However, the roles can be reversed at the nanoscale. Here, we demonstrate that flexoelectricity is a viable route to lead-free microelectromechanical and nanoelectromechanical systems. Specifically, we have fabricated a silicon-compatible thin-film cantilever actuator with a single flexoelectrically active layer of strontium titanate with a figure of merit (curvature divided by electric field) of 3.33MV â '1, comparable to that of state-of-the-art piezoelectric bimorph cantilevers.