Skip to main content

SISTEMAS MOLECULARES ELECTROACTIVOS: ESTRUCTURA ELECTRONICA, PROPIEDADES OPTICAS Y ORGANIZACION SUPRAMOLECULAR

CTQ2015-71154-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Saddle-like, π-conjugated, cyclooctatetrathiophene-based, hole-transporting material for perovskite solar cells

  • Urieta-Mora, Javier
  • García-Benito, Inés
  • Zimmermann, Iwan
  • Aragó, Juan
  • Calbo, Joaquín
  • Grancini, Giulia
  • Molina Ontoria, Agustín
  • Ortí, Enrique
  • Martín León, Nazario
  • Khaja Nazeeruddin, Mohammad
A flexible, saddle-like, π-conjugated skeleton composed of four fused thiophene rings forming a cyclooctatetrathiophene (CoTh) with four triphenylamines (CoTh-TTPA) is presented as a hole-transporting material (HTM) for perovskite solar cells. The new HTM shows a bright red color stemming from a direct conjugation between the TPA groups and the central CoTh scaffold. This results in a charge transfer band due to the combination of the weak acceptor moiety, the CoTh unit, and the electron-donating p-methoxytriphenylamine groups. CoTh-TTPA exhibits a suitable highest-occupied molecular orbital (HOMO) level in relation to the valence band edge of the perovskite, which ensures efficient hole extraction at the perovskite/HTM interface. It has been applied as the HTM in combination with a mixed perovskite ([FAPbI3]0.85[MAPbBr3]0.15) and a state-of-the-art triple cation perovskite ([(FAPbI3)0.87(MAPbBr3)0.13]0.92[CsPbI3]0.08) reaching noticeable light-to-energy conversion efficiencies of 16.3 and 15.9%, respectively. These values are slightly lower than those measured for the benchmark spiro-OMeTAD HTM. The HTM properties have been analyzed by means of photoluminescence and conductivity experiments, which demonstrated a better hole extraction and conductivity for spiro-OMeTAD.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photophysical Properties of Oligo(phenylene ethynylene) Iridium(III) Complexes Functionalized with Metal-Anchoring Groups

  • Ponce, Julia
  • Arago, Juan
  • Gómez Magenti, Jorge
  • Tatay, Sergio
  • Ortí, Enrique
  • Coronado, Eugenio
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
[EN] The electrochemical and photophysical properties of a family of conjugated ligands and their iridium(III) cyclometallated complexes are described. They consist of a series of monocationic Ir-III bis-2-phenylpyridine complexes with p-phenylethynyl-1,10-phenanthroline ligands of different length. The structure of these ligands includes terminal acetylthiol or pyridine groups, which can provide good electrical contacts between metal electrodes. Cyclic voltammetry, absorption and emission spectroscopy, laser flash photolysis and density functional theory calculations reveal that the high conjugation of the diimine ligand affords small energy gaps between the frontier orbitals. Nevertheless, the nature of the terminal substituents and the extent of the conjugation in the diimine ligand have little influence on the photophysical features at room temperature. The spectroscopic data and theoretical calculations agree that the charge-transfer nature of the emitting excited state is maintained along the series at room temperature, whereas in rigid matrices ligand-centred states also contribute to the low-temperature emission. The good conducting features of the diimine ligands, the small dependence of the HOMO-LUMO (HOMO = highest occupied molecular orbital, LUMO = lowest unoccupied molecular orbital) gaps of these complexes on the ligands and the charge-transfer nature of the emitting excited state make these complexes promising test beds for the study of photo-conducting phenomena in molecular junctions., The authors would like to especially acknowledge Prof. Hans U. Gudel for his valuable inspiration and friendship. The present work has been funded by the European Union (EU), (ERC Advanced Grant SPINMOL), the Spanish Ministerio de Economia y Competitividad (MINECO) (projects MAT2014-56243, CTQ2015-71154, and Unidad de Excelencia Maria de Maeztu MDM-2015-0552), and the Generalitat Valenciana (Prometeo/2012/053, PrometeoII/2013/006 and ISIC-Nano). J. P., I. V. and S. T. thank the Ministerio de Ciencia e Innovacion (MICINN) for their predoctoral fellowships and JdlC contracts. J. A., I. V., and S. T. also thank the European Union (EU) for their FP7-PEOPLE-2012-IEF-329513, PCIG12GA-2012-334257 and MSCA-IF-657465, and FP7-PEOPLE-2012-CIG-321739 grants, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tetrathiafulvalene–Polychlorotriphenylmethyl Dyads: Influence of Bridge and Open-Shell Characteristics on Linear and Nonlinear Optical Properties

  • Souto Salom, Manuel
  • Calbo, Joaquín
  • Ratera, Immaculada
  • Ortí, Enrique
  • Veciana, Jaume
Three conjugated donor-π-acceptor radical systems (1 a–1 c) were prepared by bridging a tetrathiafulvalene (TTF) electron-donor unit to a polychlorotriphenylmethyl (PTM) electron-acceptor radical through vinylene units of different lengths. The dependence of the intramolecular charge transfer on the length of the conjugated bridge has been analyzed by different electrochemical and spectroscopic techniques. Linear optical properties and the second-order nonlinear optical (NLO) response of these derivatives have been computed by comparing systems 1 a–1 c with the non-radical analogues (2 a–2 c). Interestingly, an enhanced NLO response is predicted for dyads 1 a–1 c with PTM in the radical form and for compounds with longer vinylene bridges. Calculations confirm the active role the bridge plays for electronic communication between the donor TTF and the acceptor PTM units., This work was supported by the EU TrainingNetwork (ITN) “iS-witch” (GA No. 642196), the Spanish Ministry of EconomyandCompetitiveness MINECO (projects CTQ2013-40480-R andCTQ2015-71154-P), the Networking Research CenteronBioen-gineering, Biomaterials, and Nano- medici ne (CIBER-BBN), theGeneralitat de Catalunya (grant 2014-SGR-17), the Generalitat Valenciana (PROMETEO/2016/135) and European Feder funds(CTQ2015-71154-P). ICMAB acknowledges support from theMINECOthrough the “Severo Ochoa” Programme for Centresof Excellence in R&D (SEV-2015-0496). ICMol thanks theMINECOfor the Unidad de Excelencia Mar&adeMaeztu MDM-2015-0538. M.S. and J.C. are grateful to MECD of Spain for FPUpredoctoral grants.Wethank Amable Bernab8 for MALD Ispec-troscopy and Vega Lloveras for ESR spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy alignment and recombination in perovskite solar cells: weighted influence on the open circuit voltage

  • Gelmetti, Ilario
  • Montcada, Núria F.
  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Ocal, Carmen
  • García Benito, Inés
  • Molina Ontoria, Agustín
  • Martín, Nazario
  • Vidal Ferran, Anton
  • Palomares, Emilio
In this work, we assess the possible reasons for the differences observed in open circuit voltage (VOC) in mixed cation perovskite solar cells when comparing four different hole transport materials (HTMs), namely TAE‐1, TAE‐3, TAE‐4 and spiro‐OMeTAD. All these HTMs present close chemical and physical properties. Additionally to the evaluation of the HTM influence on recombination, we find that, upon deposition of the organic HTM on top of the perovskite, there is an important change in the energy levels position, and the impact on the device VOC is discussed. We consider that this experimental observation could be general for other organic HTMs and would justify the difficulties for finding molecules and materials that could improve the efficiency of perovskite solar cells overcoming the solar‐to‐energy conversion efficiency of solar cells made using spiro‐OMeTAD as holes selective contact., EP and AVF thank MINECO (projects CTQ2013-47183 and CTQ2017- 89814-P). NM thanks the European Research Council (ERC-320441- Chirallcarbon), the CAM (Y2018/NMT-4783QUIMTRONIC-CM) and the Spanish Ministry of Economy and Competitiveness MINECO (projects CTQ2014-52045-R, CTQ2015-71154-P, CTQ2016-80042-R, CTQ2017-83531-R and CTQ2016-81911-REDT). NM also thanks the Alexander von Humboldt Foundation and the Unidad de Excelencia Severo Ochoa SEV-2016-0686 is acknowledged. EP and AV are also grateful to ICIQ and ICREA for economical support. EB and CO thank the Generalitat de Catalunya 2017 SGR668 and 2017 SGR669, the MINEICO projects MAT2016-77852-C2-1-R (AEI/FEDER, UE), MAT2015-68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). IG thanks Jesús Jiménez López for the fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of clicked star-shaped triazines into functional nanostructures

  • Castillo Vallés, Martín
  • Beltran, Eduardo
  • Cerdá, Jesús
  • Aragó, Juan
  • Romero, Pilar
  • Serrano, José Luis
  • Ortí, Enrique
  • Giménez Soro, Raquel
  • Sierra, Teresa
Two non‐amphiphilic star‐shaped 2,4,6‐tris(1,2,3‐triazol‐4‐yl)‐1,3,5‐triazines showing different behavior in terms of self‐assembly and luminescent properties are described. They aggregate in the liquid phase to form low‐dimensional nanostructures with a variety of morphologies, such as spherical particles, one‐hole hollow spheres, toroids, twisted fibers or helical nanotubes, just by varying the conditions of a straightforward reprecipitation method. Aggregation has an opposite effect concerning the fluorescent properties of the proposed compounds, either causing the enhancement or the quenching of the emission after the self‐assembly. Quantum chemical calculations have been also performed to assist in the structural and electronic characterization of the two star‐shaped compounds., This work was financially supported by the MINECO‐FEDER (UE) funds (projects MAT2015‐66208‐C3‐1, CTQ2015‐71154‐P, and Unidad de Excelencia María de Maeztu MDM‐2015‐0538), the Generalitat Valenciana (PROMETEO/2016/135 and SEJI/2018/035), the Gobierno de Aragón‐FSE (UE) (E47_17R) and PI2 program from ICMA‐CSIC, M.C. and J.C. are grateful to the MINECO for their predoctoral contracts. J.A. is also thankful to the MINECO for a “JdC‐Incorporación” Fellowship (IJCI‐2015‐26154)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self-assembly of Clicked Star-Shaped Triazines into Functional Nanostructures

  • Castillo-Vallés, M.
  • Beltrán, E.
  • Cerdá, J.
  • Aragó, J.
  • Romero, P.
  • Serrano, J.L.
  • Ortí, E.
  • Giménez, R.
  • Sierra, T.
Two non-amphiphilic star-shaped 2, 4, 6-tris(1, 2, 3-triazol-4-yl)-1, 3, 5-triazines showing different behavior in terms of self-assembly and luminescent properties are described. They aggregate in the liquid phase to form low-dimensional nanostructures with a variety of morphologies, such as spherical particles, one-hole hollow spheres, toroids, twisted fibers or helical nanotubes, just by varying the conditions of a straightforward reprecipitation method. Aggregation has an opposite effect concerning the fluorescent properties of the proposed compounds, either causing the enhancement or the quenching of the emission after the self-assembly. Quantum chemical calculations have been also performed to assist in the structural and electronic characterization of the two star-shaped compounds.