Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr2IrO4 thin films

  • Domingo, Neus
  • López Mir, Laura
  • Paradinas, Markos
  • Ocal, Carmen
  • Martí, Xavier
  • Catalán, Gustau
This article has been highlighted as "Hot Paper" in Nanoscale.-- Domingo, Neus et al., Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin–orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr2IrO4. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices., N.D wants to acknowledge the Spanish Ministerio de Ciencia e Innovación for a Ramon y Cajal research grant RYC-2010-06365. X.M. acknowledges the Grant Agency of the Czech Republic No. P204/11/P339. G.C. acknowledges ERC Starting Grant 308023. T.J. acknowledges ERC Advanced Grant 268066 and Praemium Academiae of the Academy of Sciences of the Czech Republic. Di Yi was sponsored by the National Science Foundation through the Penn State MRSEC. J.L. is supported by the Director, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 through the Quantum Material program in the Materials Sciences Division of Lawrence Berkeley National Laboratory. Financial support has been obtained under projects from the Spanish Ministerio de Economía y Competitividad under projects MAT2010-17771, MAT2010-20020, MAT2013-47869-C4-1-P, FIS2013-48668-C2-1-P and NANOSELECT CSD2007-00041 and Severo Ochoa Excellence Programme 2013-0295, and the Generalitat de Catalunya under projects 2014 SGR 733 and 2014 SGR 1216., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Film quality and electronic properties of a surfaceanchored metal-organic framework as revealed by a multi-technique approach

  • Liu, Jianxi
  • Paradinas, Markos
  • Heinke, Lars
  • Buck, Manfred
  • Ocal, Carmen
  • Mugnaini, Veronica
  • Wöll, Christof
The virtually unlimited versatility and unparalleled level of control in the design of metal-organic frameworks (MOFs) has recently been shown to also entail a potential for applications based on the electrical and electronic properties of this rich class of materials. At present, methods to provide reliable and reproducible contacts to MOF materials are scarce; therefore, we have carried out a detailed, multi-technique investigation of an empty and loaded prototype MOF, HKUST-1. Epitaxial thin films of this material grown on a substrate by using liquid-phase epitaxy have been studied by cyclic voltammetry, atomic force microscopy, and quartz crystal microbalance and their quality assessed. By using an ionic liquid as the electrolyte, it is shown that redox-active molecules like ferrocene can be embedded in the pores, enabling a change in the overall conductivity of the framework and the study of the redox chemistry of guest molecules inside the MOF., VM acknowledges the EU for the funding through the granting of a Marie Curie Intra-European Fellowship (FP7-PEOPLE-2011; MOLSURMOF-301110). JL acknowledges the program of China Scholarship Council (CSC) for financial support. VM, JL and CW acknowledge A. Terfort for supplying the thiol derivatives. MP and CO acknowledge financial support from the Spanish Government through grants projects MAT2013-47869-C4-1-P and SEV-2015–0496, and Generalitat de Catalunya through grant project 2014 SGR 501., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

N,O-Type Carborane-Based Materials

  • Giner Planas, José
  • Teixidor, Francesc
  • Viñas, Clara
This review summarizes the synthesis and coordination chemistry of a series of carboranyl ligands containing N,O donors. Such carborane-based ligands are scarcely reported in the literature when compared to other heteroatom-containing donors. The synthetic routes for metal complexes of these N,O-type carborane ligands are summarized and the properties of such complexes are described in detail. Particular attention is paid to the effect that the incorporation of carboranes has into the coordination chemistry of the otherwise carbon-based ligands and the properties of such materials. The reported complexes show a variety of properties such as those used in magnetic, chiroptical, nonlinear optical, catalytic and biomedical applications., We thank MEC grants CTQ2013-44670-R, MAT2013-47869-C4-2-P and Generalitat de Catalunya 2014/SGR/00149 for financial support. We would like to thank and dedicate this review to the people and key players in the papers of our group; their work has wonderfully influenced our research in the past few years., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis, structures and properties of ironIII complexes with (o-carboranyl)bis-(2-hydroxymethyl)pyridine: Racemic versus meso

  • Min Ying Tsang
  • Teixidor, Francesc
  • Viñas, Clara
  • Choquesillo-Lazarte, Duane
  • Aliaga Alcalde, Nuria
  • Giner Planas, José
The reaction of iron(II) chloride with anti- or syn-1,2-bis{(pyridin-20-yl)methanol}-1,2-dicarba-closododecaborane (anti- or syn-oCB-L1) afforded two new complexes, [Fe2Cl2(anti-oCB-L12 )2] (1) or Fe2Cl3(syn-oCB-L12 )(EtO)(H2O) (2), respectively. Both complexes were unambiguously characterized by means of X-ray structure analysis. Their solid state structures give evidence for the different coordination modes of the ligands. Both compounds are dinuclear FeIII complexes, however, whereas in complex 1 there are two anti-oCB-L12 ligands per molecular unit, in complex 2 only one syn-oCB-L12 is found. In complex 1, anti-oCB-L12 acts as a tetradentate N2O2-ligand affording a homochiral complex as a partial racemic mixture of D,D-[Fe2Cl2(RRanti-oCB-L12 )2] and K,K-[Fe2Cl2(SSanti-oCB-L12 )2]. In complex 2, syn-oCB-L12 behaves as a bis-bidentate NO ligand. Only complex 1 could be synthesized in good yield and as a pure phase and it has been therefore fully characterized by spectroscopic methods and the magnetic properties studied., We thank MEC grants CTQ2013-44670-R, MAT2013-47869-C4- 2-P and Generalitat de Catalunya (2014/SGR/00149) for financial support. The Intramural CSIC (201530E011) provided X-ray structural facilities for this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Prominent local transport in silicon carbide composites containingin-situ synthesized three-dimensional graphene networks

  • Miranzo López, Pilar
  • López Mir, Laura
  • Román-Manso, Benito
  • Belmonte, Manuel
  • Osendi, María Isabel
  • Ocal, Carmen
In-situ grown graphene/SiC composites developed by spark plasma sintering have emerged as a very interesting family of materials with expected high performance for advanced applications. In this work, the local functional properties of graphene/SiC ceramics are elucidated for distinct α- and β- SiC polytypes combining scanning probe microscopies. We unambiguously identify all composite constituents and demonstrate the formation of a three-dimensional graphene conductive network inside the composite. The investigated composites exhibit grains with different doping level depending on growth rate during sintering so that conduction paths associated to graphene and matrix networks may compete. The relevance of nanoscale characterization on functional graphene/semiconductor materials is proved as it evidences the type of doping and carrier concentration of the semiconductor and the critical role played by the graphene constituent in the formation of ohmic contacts. Both issues of crucial importance for understanding the macroscale behavior of these materials and determine their applications., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2012-32944 and CSIC (PIE201360E063). C. O acknowledges the Spanish MINECO through the Severo Ochoa Program (SEV-2015-0496) and the Generalitat de Catalunya through 2014 SGR 501. L. LM and B. RM thank the Spanish MINECO for FPI BES-2013-063424 and FPI BES-2010-041382 FPI fellowships. The authors acknowledge L. Garzón for his help with some SFM data., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Micro and nano-patterning of single-crystal diamond by swift heavy ion irradiation

  • García, Gustavo
  • López Mir, Laura
  • Ocal, Carmen
  • Díaz-Hijar, M.
  • Olivares Villegas, José
G. García et al., This paper presents experimental data and analysis of the structural damage caused by swift-heavy ion irradiation of single-crystal diamond. The patterned buried structural damage is shown to generate, via swelling, a mirror-pattern on the sample surface, which remains largely damage-free. While extensive results are available for light ion implantations, this effect is reported here for the first time in the heavy ion regime, where a completely different range of input parameters (in terms of ion species, energy, stopping power, etc.) is available for customized irradiation. The chosen ion species are Au and Br, in the energy range 10-40 MeV. The observed patterns, as characterized by profilometry and atomic force microscopy, are reported in a series of model experiments, which show swelling patterns ranging from a few nm to above 200 nm. Moreover, a systematic phenomenological modelling is presented, in which surface swelling measurements are correlated to buried crystal damage. A comparison is made with data for light ion implantations, showing good compatibility with the proposed models. The modelling presented in this work can be useful for the design and realization of micropatterned surfaces in single crystal diamond, allowing to generate highly customized structures by combining appropriately chosen irradiation parameters and masks., GG acknowledges support from the ALBA synchrotron, W. Schildkamp for inspiring discussions on the behavior of diamond and J. Ferrer for his help in experiment preparation. GG, MD-H, VT-M, OP-R and JO acknowledge the projects MAT-2011-28379-C03-02 of the Spanish Ministry of Economy and Competitiveness, TECHNOFUSION(II)¬CM (S2013/MAE¬2745) of the Community of Madrid, and Moncloa Campus of International Excellence (UCM-UPM) foundation for offering a PICATA postdoctoral fellowship (OP-R). FP is supported by the “DiNaMo” project n° 157660 funded by National Institute of Nuclear Physics. PO is supported by the FIRB “Futuro in Ricerca 2010” project (CUP code: D11J11000450001) funded by MIUR and by the “A.Di.N-Tech.” project (CUP code: D15E13000130003) funded by the University of Torino and “Compagnia di San Paolo”. The MeV ion beam implantations performed at the INFN Legnaro National Laboratories was supported by the “Dia.Fab.” experiment, and those at the INFN LABEC Laboratory by the “FARE” and “CICAS” experiments. NMP is supported by the European Research Council (ERC StG Ideas 2011 BIHSNAM n. 279985, ERC PoC 2013-2 KNOTOUGH n. 632277 and ERC PoC 2015 SILKENE no. 693670), by the European Commission under the Graphene Flagship ("Nanocomposites", n. 604391). FB acknowledges support from BIHSNAM. LL-M and CO acknowledge the Spanish MINECO through the Severo Ochoa Program (SEV-2015-0496) and MAT2013-47869-C4-1-P. CO acknowledges the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth Instabilities as a Source of Surface Chemical Structuration in Functional Perovskite Thin Films

  • López Mir, Laura
  • Balcells Argemi, Lluis
  • Valencia, Sergio
  • Kronast, Florian
  • Martínez Perea, Benjamín
  • Miguel, Juan José de
  • Ocal, Carmen
The spontaneous formation of double chemical terminated surfaces of La0.7Sr0.3MnO3 due to deviations from ideal epitaxial growth during its deposition on SrTiO3(001) is presented. The development of surface regions with differentiated topmost composition leads to outstanding surface nanostructuration presenting notably distinct local properties, particularly in terms of electric transport and local work function. Correlation between combined atomic force microscopy and X-ray photoelectron spectroscopy data allows the chemical identification of the two terminations as corresponding to La0.7Sr0.3O and MnO2. The most likely atomistic process at the origin of the surface organization has been interpreted by Monte Carlo simulations that reveal the importance of stacking fault formation as growth proceeds. We present a physical understanding of the experimental results for surfaces in which different electronic responses coexist. The conclusions of the present work can be extended to the growth of other perovskite thin films, therefore broadening the field of functional materials nanostructuration., This work has been supported by the Spanish Government under projects MAT2013-47869-C4 and MAT2015-71664-R. The ICMAB members acknowledge the Spanish MINECO through the project MAT2015-68994-REDC and the Severo Ochoa Program (SEV-2015-0496), FEDER program and the Generalitat de Catalunya through 2014 SGR 501. L.L.M. thanks the Spanish MINECO for a FPI BES-2013-063424 fellowship. J.J.M. thanks the Centro de Computacioń Cientıfí ca (CCC) of the Universidad Autónoma de Madrid for computing time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coming across a novel copper oxide 2D framework during the oxidation of Cu(111)

  • Matencio, Sonia
  • Barrena, Esther
  • Ocal, Carmen
Two dimensional copper oxides obtained on Cu(111) by air-enriched argon sputtering plus annealing have been measured at room temperature by means of scanning tunneling microscopy (STM) and atomic force microscopy (AFM) under ultra-high vacuum (UHV) conditions. Depending on the oxygen content different oxide frameworks and diverse stoichiometric metal/oxide interfaces exist. In particular, we report on a novel open honeycomb structure with a large unit cell which is modeled as a two dimensional network made out of Cu3O units. This lattice coexists with other oxide structures richer in oxygen and is suggested to develop towards these denser phases by oxygen incorporation., This work has been supported by the Spanish Government under project MAT2013-47869-C4-1-P and the Generalitat de Catalunya 2014 SGR501. We acknowledge the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015- 68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). We thank G. Sauthier for XPS measurements and Ll. Gines for equipment UHV support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-arranged misfit dislocation network formation upon strain release in La0.7Sr0.3MnO3/LaAlO3(100) epitaxial films under compressive strain

  • Santiso, José
  • Roqueta, Jaume
  • Bagués, Núria
  • Frontera, Carlos
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Pomar, Alberto
  • Balcells, Lluis
  • Sandiumenge, Felip
Santiso, José et al., Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material., This research was funded by the Spanish MINECO (projects: MAT2011-29081-C02, MAT2012-33207 and MAT2013-47869-C4-1-P, Consolider-Ingenio CSD2008-00023) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658. We also acknowledge financial aid from the Generalitat de Catalunya (2014 SGR 501 and 2014 SGR 1216). J. S. thanks the support of Ministry of Education and Science through program “Salvador de Madariaga” for a grant (ref: PRX14/00297) to perform a stay at MIT. Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018. Q.L. and B.Y. thank the National Science Foundation for support through the MIT Center of Materials Science and Engineering MRSEC under grant no. DMR-1419807. This work made use of the Shared Experimental Facilities supported in part by the MRSEC Program of the National Science Foundation under award number DMR – 1419807. We thank Dr. Belén Ballesteros (ICN2, Barcelona) and Prof. Marie-Jo Casanova (CEMES, Toulouse) for their assistance with transmission electron microscopy experiments. We are grateful to J. Rubio-Zuazo and the ESRF for providing assistance in using beamline BM25. We also thank HZB for the allocation of synchrotron radiation beamtime at Bessy., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hetero-bimetallic paddlewheel clusters in coordination polymers formed by a water-induced single-crystal-to-single-crystal transformation

  • Albalad, Jorge
  • Aríñez-Soriano, Javier
  • Vidal Gancedo, José
  • Lloveras, Vega
  • Juanhuix, Jordi
  • Imaz, Inhar
  • Aliaga Alcalde, Nuria
  • Maspoch, Daniel
Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(II)-Zn(II) and Cu(II)-Ni(II) paddle-wheel units exhibiting a 1 : 1 metal ratio were created., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2013-47869-C4-2-P), DGI grant BeWell (CTQ2013-40480-R), the Catalan AGAUR (project 2014-SGR-80 and 2014-SGR-17), and the ERC under the EU FP7 (ERC-Co 615954). J. A. thanks the Generalitat de Catalunya for a FI fellowship (2016FI B 00449). ICN2 and ICMAB acknowledge the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grants SEV-2013-0295 and SEV-2015-0496. The authors thank Dr N. Clos from the Serveis Cientifíco-Tècnics of the University of Barcelona for her assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cu diffusion as an alternative method for nanopatterned CuTCNQ film growth

  • Capitán, M. J.
  • Álvarez, J.
  • Navío, C.
  • Miranda, R.
12 págs.; 8 figs., In this paper we show by means of ‘in situ’ x-ray diffraction studies that CuTCNQ formation from Cu(solid)–TCNQ(solid tetracyanoquinodimethane) goes through Cu diffusion at room temperature. The film quality depends on the TCNQ evaporation rate. At low evaporation rate we get a single phase-I CuTCNQ film very well crystallized and well oriented. The film has a CuTCNQ(0 2 0) orientation. The film is formed by CuTCNQ nanorods of a very homogeneous size. The film homogeneity has also been seen by atomic force microscopy (AFM). The electronic properties of the film have been measured by x-ray photoelectron spectroscopy (XPS) and ultra-violet photoelectron spectroscopy (UPS). Thus, the Cu-diffusion method has arisen as a very simple, clean and efficient method to grow localized CuTCNQ nanorods on Cu, opening up new insights for technological applications. © 2016 IOP Publishing Ltd, This work was supported by the Spanish CICyT under grants No. MAT2013-47869-C4-3-P, FIS 2013-40667-P and Front- NanoMagnetS2013/MIT-3007. Parts of this research were carried out at the light source Hasylab at DESY, a member of the Helmholtz Association (HGF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TCNQ Grown on Cu (001): Its Atomic and Electronic Structure Determination

  • Capitán, M. J.
  • Navío, C.
  • Beltran, J. I.
  • Otero, R.
  • Álvarez, J.
10 pags., 7 figs., In this paper we have resolved by means of “in situ” X-ray diffraction studies the atomic structure of the TCNQ films from 0.4 to 17 ML thickness grown on Cu(001) substrate. The film grown at low temperature, is a well crystallized and well oriented single phase. The TCNQ film has a (020) orientation. The electronic properties of the film have been studied by means of XPS and UPS spectroscopies. The measured electronic density has been compared to the theoretical ab-inito calculations. In this paper we have studied the structural and electronic properties of relatively thick films of TCNQ on Cu(100). Our results demonstrate that the strong charge transfer between the metallic substrate and the first layer of TCNQ molecules have important consequences for the film electronic and structural properties of films even as thick as 17 ML. From the structural point of view, the films grow with a well-defined (020) orientation that matches the modified molecular structure of the first layer. This first monolayer structure was previously explained in literature in terms of adsorbate-induced reconstruction of the Cu surface. From the electronic point of view, charge transfer leads to band bending and determines that barrier for electron injection across the metal/organic interface. © 2016 American Chemical Society, This work was supported by the Spanish CICyT under Grant No. MAT2013-47869-C4-3-P. J.I.B. would like to thank the Abengoa Research Center under “The Virtual Material Design Project” (2nd stage) for his financial support. Parts of this research were carried out at the light source MAX-lab IV and Hasylab at DESY, a member of the Helmholtz Association (HGF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A molecular-scale portrait of domain imaging in organic surfaces

  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Fernández, Antón
  • Gnecco, Enrico
  • Ocal, Carmen
Progress in the general understanding of structure-property relationships in organic semiconductors requires experimental tools capable of imaging structural details, as molecular packing or domain attributes, featuring ultra-thin films. A rarely employed operation mode of scanning force microscopy, related to friction force microscopy (FFM) and known as transverse shear microscopy (TSM), has demonstrated the ability to reveal crystalline aspects linked to the surface symmetry of organic surfaces with nanometer resolution. In spite of those promising results, numerous questions remain about the physical origin of the TSM imaging mechanism. Taking as benchmark a PTCDI-C8 sub-monolayer, we demonstrate experimentally and theoretically that such mechanism is the same atomic scale stick-slip ruling FFM leading to the angular dependence of both signals. Lattice-resolved images acquired on top of differently oriented PTCDI-C8 molecular domains are crucial to permit azimuthal sampling, without the need of sample rotation. The simulations reveal that, though the surface crystallography is the direct cause of the FFM and TSM signals, the manifestation of anisotropy will largely depend on the amplitude of the surface potential corrugation as well as on temperature and the material itself. This work provides a novel nanoscale strategy for the quantitative analysis of organic thin films based on their nanotribological response., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852-C2- 1-R and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINECO project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real Space Demonstration of Induced Crystalline 3D Nanostructuration of Organic Layers

  • Paradinas, Markos
  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Ocal, Carmen
The controlled 3D nanostructuration of molecular layers of the semiconducting molecules C22H14 (pentacene) and N,N′-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C8) is addressed. A tip-assisted method using atomic force microscopy (AFM) is developed for removing part of the organic material and relocating it in up to six layer thick nanostructures. Moreover, unconventional molecular scale imaging combining diverse friction force microscopy modes reveals the stacking sequence of the piled layers. In particular, we unambiguously achieve epitaxial growth, an issue of fundamental importance in thin film strategies for the nanostructuration of more efficient organic nanodevices., We thank M. Aghamohammadi for her help with the film growth. This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINEICO project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015- 0496). M.P. thanks the Spanish Government for financial support through BES-2008-003588 FPI and PTA2014-09788-I fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ scrutiny of the relationship between polymorphic phases and properties of self-assembled monolayers of a biphenyl based thiol

  • Paradinas, Markos
  • Munuera, C.
  • Buck, Manfred
  • Ocal, Carmen
Two polymorphic phases of ω-(4′-methylbiphenyl-4-yl) butane-1-thiol (BP4) molecules formed on Au(111) were investigated by multidimensional atomic force microscopy, combining conductivity measurements, electrostatic characterization, friction force mapping, and normal force spectroscopy. Based on the same molecular structure but differing in molecular order, packing density, and molecular tilt, the two phases serve as a test bench to establish the structure–property relationships in self-assembled monolayers (SAMs). From a detailed analysis of the charge transport and electrostatics, the contributions of geometrical and electronic effects to the tunneling are discussed., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852- C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINECO project MAT2015-68994-REDC and the “‘Severo Ochoa”’ Program for Centers of Excellence in R&D (SEV-2015-0496). M. Paradinas thanks the Spanish Government for financial support through BES-2008-003588 FPI and PTA2014-09788-I fellowships. C. Munuera acknowledges financial support from the “Ramon y Cajal ́ ” program RYC-2014-16626., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Misfit dislocation guided topographic and conduction patterning in complex oxide epitaxial thin films

  • Sandiumenge, Felip
  • Bagués, Núria
  • Santiso, José
  • Paradinas, Markos
  • Pomar, Alberto
  • Konstantinović, Z.
  • Ocal, Carmen
  • Balcells, Lluis
  • Casanove, Marie-Jo
  • Martínez Perea, Benjamín
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in La0.7Sr0.3MnO3/LaAlO3 films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches., The authors thank Dr. Belén Ballesteros for her assistance with electron microscopy experiments. This research was sponsored by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D: SEV- 2015-0496, MAT2015-71664-R, FEDER program, MAT2012-33207, and MAT2013-47869-C4-1-P), and the European Union Horizon 2020 research and innovation program under the Marie Sklodowska–Curie grant agreement No. 645658. The authors also acknowledge fi nancial aid from the Generalitat de Catalunya (2014 SGR 501). N.B. and F.S. also acknowledge funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative I3) for providing access to aberration corrected electron microscope at CEMES (Toulouse). N.B. thanks the Spanish MINECO for fi nancial support through the FPI program. F.S. acknowledges support from the Labex (Excellence Laboratory) NEXT for a visiting scientist fellowship at CEMES (Toulouse, France). Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative Magnetic Studies in the Solid State and Solution of Two Isostructural 1D Coordination Polymers Containing CoII/NiII-Curcuminoid Moieties

  • Diaz Torres, Raul
  • Menelaou, Melita
  • González Campo, Arántzazu
  • Teat, Simon J.
  • Sañudo, E. Carolina
  • Soler Jaumá, Mónica
  • Aliaga Alcalde, Nuria
Two novel 1D coordination chains containing the curcuminoid (CCMoid) ligand 9Accm have been characterized: [CoII(9Accm)2(4,4´-bpy)]n (1) and [NiII(9Accm)2(4,4´-bpy)]n (2). The two compounds were synthesized by solvothermal and microwave (MW) assisted techniques, respectively, and crystals of both systems were directly obtained from the mother solutions. Crystal structures of 1 and 2 prove that both systems are isostructural, with the ligands in a trans configuration. The two chains have been magnetically characterized in solution by paramagnetic 1H NMR, where 1 displayed typical features from CoII systems, with spread out signals; meanwhile, 2 showed diamagnetic behaviour. The dissociation of the latest in solution and the stability of the “[Ni(9Accm)2]” unit were proved by further experiments in C5D5N. Additional UV-Vis absorption and fluorescence studies in solution were performed using exclusively 1. In the solid state χMT vs. T and M/NµB vs. H/T data were collected and fitted for 1 and 2; both systems display Ising plane anisotropy, with significant D values. System 1 presented slow relaxation of the magnetization, displaying frequency dependence in the in-phase/out-phase ac magnetic susceptibility data, when an external dc field of 0.2 T was applied. Finally, 1 was deposited on a HOPG (highly oriented pyrolytic graphite) substrate by spin-coating and analysed by AFM., The authors thank N. Clos from the Serveis Científicotècnics de la UB for her great assistance regarding the magnetic data and are grateful to O. Roubeau (ICMA, CSIC and Universidad de Zaragoza) for his help in the data acquisition and refinement of the structure of compound 1. This work was supported by the MINECO (Spain) (Projects CTQ2012-32247, and MAT2013-47869-C4-2-P) and from the FONDECYT REGULAR grant 1110206. N.A.-A. acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496. The Advanced Light Source (S.J.T.) is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under Contract DE-AC0205CH11231., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiscale study of mononuclear CoII SMMs based on curcuminoid ligands

  • Diaz Torres, Raul
  • Roubeau, Olivier
  • Sorrenti, Alessandro
  • Teat, Simon J.
  • Fraxedas, J.
  • Aliaga Alcalde, Nuria
Edge article.-- et al., This work introduces a novel family of Co species having a curcuminoid (CCMoid) ligand, 9Accm, attached, namely [Co(9Accm)(py)] (1) and [Co(9Accm)(2,2′-bpy)] (2), achieved in high yields by the use of a microwave reactor, and exhibiting two different arrangements for the 9Accm ligands, described as >cis>(2) and >trans>(1). The study of the similarities/differences of the magnetic, luminescent and surface behaviors of the two new species, 1 and 2, is the main objective of the present work. The determined single-crystal structures of both compounds are the only Co-CCMoid structures described in the literature so far. Both compounds exhibit large positive D values, that of 1 (D = +74 cm) being three times larger than that of 2 (D = +24 cm), and behave as mononuclear Single-Molecule Magnets (SMMs) in the presence of an external magnetic field. Their similar structures but different anisotropy and SMM characteristics provide, for the first time, deep insight on the spin-orbital effects thanks to the use of CASSCF/NEVPT2 calculations implementing such contributions. Further magnetic studies were performed in solution by means of paramagnetic H NMR, where both compounds (1 and 2) are stable in CDCl and display high symmetry. Paramagnetic NMR appears to be a useful diagnostic tool for the identification of such molecules in solution, where the resonance values found for the methine group (-CH-) of 9Accm vary significantly depending on the cis or trans disposition of the ligands. Fluorescence studies show that both systems display chelation enhancement of quenching (CHEQ) with regard to the free ligand, while 1 and 2 display similar quantum yields. Deposition of 1-2 on HOPG and Si(100) surfaces using spin-coating was studied using AFM; UV photoemission experiments under the same conditions display 2 as the most robust system. The measured occupied density of states of 2 with UV photoemission is in excellent agreement with theoretical DFT calculations., This work was supported by the MICINN (Spain) (Projects CTQ2012-32247, CTQ2011-23862-C02-01, MAT2012-38319-C02 and MAT2013-47869-C4-2-P). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). ER thanks Generalitat de Catalunya (ICREA Academia). The Advanced Light Source (S. J. T.) is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under Contract DE-AC0205CH11231., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Structural, chemical and strain features of misfit dislocation cores in ultrathin La0.7Sr0.3MnO3 epitaxial films deposited on LaAlO3

  • Bagués, Núria
  • Santiso, José
  • Konstantinović, Z.
  • Pomar, Alberto
  • Balcells, Lluis
  • Sandiumenge, Felip
Resumen del trabajo presentado al 16th European Microscopy Congress, celebrado en Lyon (Francia) del 28 de agosto al 2 de septiembre de 2016., Heteroepitaxial interfaces in thin film complex oxides have attracted considerable attention in recent years due to their influence on the physical properties of these materials, in particular due to the possibility of tuning bulk functional properties. The most common strain relaxation mechanism between lattice mismatched heterostructures is the formation of misfit dislocation arrays at the interface. These misfit dislocations play an interesting role as they can form self-organized patterns on the nanometre scale which can behave differently from bulk material. An understanding of the structural and chemical consequences associated with the strain fields of dislocations at oxide interfaces is important as they may determine the functionality of these oxides in ultrathin films and multilayers. In this work, misfit dislocations in epitaxial films of La0.7Sr0.3MnO3 (LSMO), a half-metal ferromagnet, grown on [001] LaAlO3 (LAO) single crystal substrates were investigated. A detailed study of atomic-scale structural and chemical changes associated with the strain field of dislocations was performed using aberration-corrected scanning transmission electron microscopy (STEM) combined with atomic resolution spectroscopy techniques; electron energy-loss (EELS) spectrum imaging and energy dispersive x-ray (EDS) spectral mapping. Special attention was paid to ultrathin films of only a few nanometers thickness where the strain field of the dislocations affects surface topography and current. A STEM high angle annular dark field (HAADF) of a cross-section of a 7nm film exhibiting dislocated interface is shown in Figure 1a, where spacing between dislocations around 20 nm can be observed. A STEM-HAADF image of the dislocation core structure with the Burgers circuit yielding a Burgers vector bx = aLAO[100], parallel to the interface, is shown in Figure 1b. The lattice strain maps (Figure 1c), taken from the experimental images using the Geometrical Phase Analysis (GPA) method, show core splitting in two partials, along with compressive and tensile regions extending into the substrate and the film, respectively. Spectroscopy analyses of cross-sections reveal a chemically rough interface between the substrate and film and show that the dislocations are not located at the interface but one or two unit cells above the interface with the substrate. Analysis of the EELS spectrum images suggest that the lanthanum composition at the vicinity of the dislocation core is enhanced. These results provide an insight into how the intrinsic strain associated with a defect, in this case misfit dislocations, may produce chemical changes which may be useful in the development of ordered functional patterns in complex oxide thin films., We acknowledge financial support from the Spanish MINECO (MAT2011-29081-C02, MAT2012-33207 and MAT2013-47869-C4-1-P). N. B. thanks to the Spanish MINECO for financial support through the FPI program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Decoding the Vertical Phase Separation and Its Impact on C8-BTBT/PS Transistor Properties

  • Pérez Rodríguez, Ana
  • Temiño, Inés
  • Ocal, Carmen
  • Mas Torrent, Marta
  • Barrena, Esther
Disentangling the details of the vertical distribution of the small semiconductor molecules blended with polystyrene (PS) and the contacts properties are issues of fundamental value for designing strategies to optimize small molecule/polymer blend organic transistors. These questions are addressed here for ultra-thin blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) and PS processed by a solution-shearing technique using three different blend composition ratios. We show that friction force microscopy (FFM) allows the determination of the lateral and vertical distribution of the two materials at the nanoscale. Our results demonstrate a three layer stratification of the blend: a film of C8-BTBT of few molecular layers with crystalline order sandwiched between a PS-rich layer at the bottom (a few nm thick) acting as passivating dielectric layer and a PS-rich skin layer on the top (~1nm) conferring stability to the devices. Kelvin probe force microscopy (KPFM) measurements performed in operating organic field-effect transistors (OFETs) reveal that the devices are strongly contact limited and suggest contact doping as route for device optimization. By excluding the effect of the contacts, field-effect mobility values in the channel as high as 10 cm2V-1s-1 are obtained. Our findings, obtained via a combination of FFM and KPFM, provide a satisfactory explanation of the different electrical performance of the OFETs as a function of the blend composition ratio and by doping the contacts., This work has been supported by the ERC StG 2012-306826 e-GAMES, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Generalitat de Catalunya (2014-SGR-17 and 2014- SGR-501) and the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2016-77852-C2-1-R and FANCY CTQ2016-80030-R. We acknowledge the MINECO project MAT2015-68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). I.T. and A.P.-R. are enrolled in the Materials Science PhD program of Universitat Autònoma de Barcelona and I.T. acknowledges FPU fellowship from the Spanish Ministry., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiscale approach to the study of the electronic properties of two thiophene curcuminoid molecules

  • Etcheverry Berríos, Álvaro
  • Diaz Torres, Raul
  • Zant, Herre S. J. van der
  • Aliaga Alcalde, Nuria
  • Soler Jaumá, Mónica
et al., We studied the electronic and conductance properties of two thiophene–curcuminoid molecules, 2-thphCCM (1) and 3-thphCCM (2), in which the only structural difference is the position of the sulfur atoms in the thiophene terminal groups. We used electrochemical techniques as well as UV/Vis absorption studies to obtain the values of the HOMO–LUMO band gap energies, showing that molecule 1 has lower values than 2. Theoretical calculations show the same trend. Self-assembled monolayers (SAMs) of these molecules were studied by using electrochemistry, showing that the interaction with gold reduces drastically the HOMO–LUMO gap in both molecules to almost the same value. Single-molecule conductance measurements show that molecule 2 has two different conductance values, whereas molecule 1 exhibits only one. Based on theoretical calculations, we conclude that the lowest conductance value, similar in both molecules, corresponds to a van der Waals interaction between the thiophene ring and the electrodes. The one order of magnitude higher conductance value for molecule 2 corresponds to a coordinate (dative covalent) interaction between the sulfur atoms and the gold electrodes., This work has been funded by the FONDECYT REGULAR grants 1110206,1140770, and 1140199, PAI-CONICYT 79150041, Conicyt PFCHA 21140734, ANILLO project Act 1117, Millenium Project RC120001, the Dutch funding agencies FOM and NWO/OCW, by the EU through a RISE (DAFNEOX) project, SEP-210165479 by the MICINN of Spain (projects CTQ2012-32247 and MAT2013-47869- C4-2-P). N.A.-A. and R.D.-T. also acknowledge financial support from MINECO through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gaining Further Insight into the Solvent Additive-Driven Crystallization of Bulk-Heterojunction Solar Cells by in Situ X-ray Scattering and Optical Reflectometry

  • Buss, Felix
  • Schmidt-Hansberg, Benjamin
  • Sanyal, Monamie
  • Munuera, C.
  • Scharfer, Philip
  • Schabel, Wilhelm
  • Barrena, Esther
The use of solvent additives has become a successful strategy to control the structural evolution upon film formation in bulk-heterojunction (BHJ) solar cells. Nonetheless, a complete understanding of the additive’s role in the phase separation mechanisms and organization of donor and acceptor materials in BHJs is still lacking. In this work we gain further insight about the specific role that a widely used additive, 1,8-octanedithiol (ODT), has in the crystallization of both PCPDTBT and PC71BM, directly after wet film deposition using blade-coating. By in situ X-ray scattering and optical reflectometry, we correlate the additive-driven crystallization with the evolution of film composition from the earliest time of solvent evaporation. It is shown that ODT influences the evolution of both PCPDTBT and PC71BM. ODT leads to prolonged crystallization time during the ODT-drying dominated period corresponding to an overall solvent content (x) of 75 wt % > x > 15 wt % and delays the onset of PC71BM aggregation to x < 20 wt %, being pushed out of the crystalline polymer domains., This work was supported by the German Research Foundation (DFG) within the Priority Program 1355. E.B. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and through the project MAT2013-47869-C4-1-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chiral Organization and Charge Redistribution in Chloroaluminum Phthalocyanine on Au(111) Beyond the Monolayer

  • Matencio, Sonia
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
  • Barrena, Esther
The nontrivial effect of molecular dipoles on the surface work function of metals is explored for the unidirectional ordered arrays forming the first and second layers of chloroaluminum phthalocyanine on Au(111). This phthalocyanine is a nonplanar molecule with permanent electric dipole perpendicular to its molecular π-plane that can adopt two distinct configurations (Cl-up and Cl-down) when adsorbed on surfaces. The ordered array forming the first layer is known to consist of all Cl-up molecules, whereas the less-studied second layer is formed by molecules in the Cl-down configuration. The inverted orientation of the molecules in these two layers constitutes our benchmark system to investigate the influence of the dipole array orientation on the surface work function. The present study includes an experimental and theoretical approach that combines diverse imaging and spectroscopic scanning probe microscopies, in ultrahigh vacuum, with first-principles density functional theory-based atomistic simulations. Experiment and theory show a chiral organization transferred from the first layer to the growing film that is reflected in the electronic structure. We demonstrate that the obtained surface work function changes are smaller in magnitude than expected from a dipolar approximation because of charge rearrangement at and beyond the monolayer. We provide understanding of the crucial interplay between the interlayer and organic/metal interactions and quantify their effect on the electron density distribution and on the work function changes., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2015-72848- EXP /AEI and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2017 SGR 668. R. P-R. thanks financial support through BES-2014-067942. We acknowledge the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). J.I.M. acknowledges the financial support by the Spanish MINECO via grant no. MAT2017-85089-C2-1- R and the “Ramon y Cajal ́ ” Program (grant no. RYC-2015- 17730), and the EU through the Innovation Program (grant 696656: Graphene Core1. Graphene-based disruptive technologies), as well as the use of computing resources from CTICSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enantiopure Supramolecular Motifs of Self-Assembled Diamine-Based Chiral Molecules on Cu(100)

  • Palacios-Rivera, Rogger
  • Barrena, Esther
  • Faraudo, Jordi
  • Gargiani, Pierluigi
  • Niño, Miguel Ángel
  • Arvanitis, Dimitri
  • Kowalik, Iwona
  • Miguel, Juan José de
  • Ocal, Carmen
The assembly of two diphenylethylenediamine enantiomers, separately deposited on Cu(100), is investigated from the first stages of two-dimensional crystallization to the nucleation and growth of the second layer. By means of scanning tunneling microscopy, we show that the chirality of enantiomers is expressed at different levels of molecular organization. Below the monolayer completion, a disordered phase coexists with domains of a square lattice aligned with the principal crystallographic directions of the substrate. The intrinsic chirality of the molecules is only manifested through specific features contained within the corresponding unit cell. For increasing coverage, this arrangement is accompanied by a second square structure, which appears to be clockwise or counterclockwise rotated with respect to the Cu(100) directions depending on the enantiomer. The nucleation of molecular chains on top of the aligned square structure gives rise to a second layer exhibiting a stripelike configuration with remarkable left- or right-handed helicity that mirrors that of the particular enantiomer. The nearly flat configuration of the first-layer molecules is confirmed by angular-dependent X-ray absorption experiments and supported by molecular dynamics simulations., This work has been supported by the Spanish Government under projects MAT2013-47869-C4, MAT2014-59315-R, MAT2015-72848-EXP/AEI, FIS2016-74893-P, and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2017 SGR 668. We also appreciate the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). The NEXAFS experiments were performed at BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Program for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). R.P.-R. thanks the financial support through BES-2014-067942 (FPI fellowship). We acknowledge the CESGA Supercomputing Center for computational time at the Finisterrae Supercomputer and technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular block copolymers incorporating chiral and achiral chromophores for the bottom-up assembly of nanomaterials

  • Riba Moliner, Marta
  • Oliveras González, Cristina
  • Amabilino, David B.
  • González Campo, Arántzazu
This paper is part of the 2019 Women in porphyrin science special issue., The coordination of the chiral metalloporphyrin ([5,10,15,20-[4-(R,R,R,R)-2-N-octadecylamidoethyloxiphenyl]porphyrin] zinc (II)) and an achiral homologue to an amphiphilic block copolymer of poly(styrene-b-4-vinyl pyridine) (PS-b-P4VP) have been studied in solution and as cast material. The resulting chiral dye-polymer hybrid material has been accomplished via axial coordination between the zinc (II) metal ion in the core of the porphyrin ring and the pyridyl units of the block-copolymer in a non-coordinative solvent. The supramolecular organization and possible chirality transfer to the hybrid material have been studied in solution by UV-visible absorption spectroscopy, fluorescence spectroscopy, Nuclear Magnetic Resonance and Circular Dichroism. The morphology of the chiral and achiral doped polymers has been studied in solid state by Transmission Electron Microscopy and Atomic Force Microscopy. We show that the nanostructures formed depend greatly upon the nature of the side-chains on the porphyrins, where a chiral group leads to a very homogeneous phase-separated material, perhaps indicating that chiral side groups are useful for the preparation of this type of supramolecular hybrid., We thank T. Parella (UAB) for its help in DOSY-NMR measurements, J. Oró (ICMAB) for its help in TEM imaging and M. Simón (ICMAB) for its help in AFM imaging. The work was supported by MINECO with the Project MAT2016-77852-C2-1-R (AEI/FEDER, UE) and MAT2013-47869-C4-2-P and Generalitat de Catalunya for the project 2017-SGR-1277. AGC acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and the Ministry of Science, Innovation and Universities for a Ramon y Cajal contract (RYC-2017-22910)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sequential electron transport and vibrational excitations in an organic molecule coupled to few-layer graphene electrodes

  • Burzurí, Enrique
  • Island, Joshua O.
  • Diaz Torres, Raul
  • Fursina, Alexandra
  • González-Campo, Arántzazu
  • Roubeau, Olivier
  • Teat, Simon J.
  • Aliaga Alcalde, Nuria
  • Ruiz, Eliseo
  • Zant, H. S. J. van der
Graphene electrodes are promising candidates to improve reproducibility and stability in molecular electronics through new electrode–molecule anchoring strategies. Here we report sequential electron transport in few-layer graphene transistors containing individual curcuminoid-based molecules anchored to the electrodes via π–π orbital bonding. We show the coexistence of inelastic co-tunneling excitations with single-electron transport physics due to an intermediate molecule–electrode coupling; we argue that an intermediate electron–phonon coupling is the origin of these vibrational-assisted excitations. These experimental observations are complemented with density functional theory calculations to model electron transport and the interaction between electrons and vibrational modes of the curcuminoid molecule. We find that the calculated vibrational modes of the molecule are in agreement with the experimentally observed excitations., This work was supported by the EU FP7 program through project 618082 ACMOL and ERC grant advanced Mols@Mols. It was also supported by OCW and the Dutch funding organization NWO (VENI) and FOM. E.R. thanks Generalitat de Catalunya for an ICREA Academia Award. N.A.-A., R.D.-T., and A.G.-C. thank the MICINN of Spain (projects CTQ2012-32247 and MAT2013-47869-C4-2-P). The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under contract DE-AC02-05CH11231., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multiscale study of mononuclear CoII SMMs based on curcuminoid ligands

  • Díaz-Torres, R.
  • Menelaou, M.
  • Roubeau, O.
  • Sorrenti, A.
  • Brandariz-De-Pedro, G.
  • Sañudo, E.C.
  • Teat, S.J.
  • Fraxedas, J.
  • Ruiz, E.
  • Aliaga-Alcalde, N.
This work introduces a novel family of CoII species having a curcuminoid (CCMoid) ligand, 9Accm, attached, namely Co(9Accm)2(py)2] (1) and Co(9Accm)2(2,2'-bpy)] (2), achieved in high yields by the use of a microwave reactor, and exhibiting two different arrangements for the 9Accm ligands, described as "cis"(2) and "trans"(1). The study of the similarities/differences of the magnetic, luminescent and surface behaviors of the two new species, 1 and 2, is the main objective of the present work. The determined single-crystal structures of both compounds are the only CoII-CCMoid structures described in the literature so far. Both compounds exhibit large positive D values, that of 1 (D = +74 cm-1) being three times larger than that of 2 (D = +24 cm-1), and behave as mononuclear Single-Molecule Magnets (SMMs) in the presence of an external magnetic field. Their similar structures but different anisotropy and SMM characteristics provide, for the first time, deep insight on the spin-orbital effects thanks to the use of CASSCF/NEVPT2 calculations implementing such contributions. Further magnetic studies were performed in solution by means of paramagnetic 1H NMR, where both compounds (1 and 2) are stable in CDCl3 and display high symmetry. Paramagnetic NMR appears to be a useful diagnostic tool for the identification of such molecules in solution, where the resonance values found for the methine group (-CH-) of 9Accm vary significantly depending on the cis or trans disposition of the ligands. Fluorescence studies show that both systems display chelation enhancement of quenching (CHEQ) with regard to the free ligand, while 1 and 2 display similar quantum yields. Deposition of 1-2 on HOPG and Si(100) surfaces using spin-coating was studied using AFM; UV photoemission experiments under the same conditions display 2 as the most robust system. The measured occupied density of states of 2 with UV photoemission is in excellent agreement with theoretical DFT calculations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multiscale study of mononuclear Co" SMMs based on curcuminoid ligands

  • Díaz-Torres, Raúl
  • Menelaou, Melita|||0000-0001-7845-8802
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Sorrenti, Alessandro
  • Brandariz de Pedro, Guillem
  • Sañudo, E. Carolina|||0000-0001-9647-6406
  • Teat, Simon J.
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
This work introduces a novel family of Co" species having a curcuminoid (CCMoid) ligand, 9Accm, attached, namely [Co(9Accm)₂(py)₂] (1) and [Co(9Accm)₂(2,20-bpy)] (2), achieved in high yields by the use of a microwave reactor, and exhibiting two different arrangements for the 9Accm ligands, described as "cis"(2) and "trans"(1). The study of the similarities/differences of the magnetic, luminescent and surface behaviors of the two new species, 1 and 2, is the main objective of the present work. The determined single-crystal structures of both compounds are the only Co"-CCMoid structures described in the literature so far. Both compounds exhibit large positive D values, that of 1 (D = +74 cm⁻¹) being three times larger than that of 2 (D = +24 cm⁻¹), and behave as mononuclear Single-Molecule Magnets (SMMs) in the presence of an external magnetic field. Their similar structures but different anisotropy and SMM characteristics provide, for the first time, deep insight on the spin-orbital effects thanks to the use of CASSCF/NEVPT2 calculations implementing such contributions. Further magnetic studies were performed in solution by means of paramagnetic ¹H NMR, where both compounds (1 and 2) are stable in CDCl₃ and display high symmetry. Paramagnetic NMR appears to be a useful diagnostic tool for the identification of such molecules in solution, where the resonance values found for the methine group (-CH-) of 9Accm vary significantly depending on the cis or trans disposition of the ligands. Fluorescence studies show that both systems display chelation enhancement of quenching (CHEQ) with regard to the free ligand, while 1 and 2 display similar quantum yields. Deposition of 1-2 on HOPG and Si(100) surfaces using spin-coating was studied using AFM; UV photoemission experiments under the same conditions display 2 as the most robust system. The measured occupied density of states of 2 with UV photoemission is in excellent agreement with theoretical DFT calculations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Real space demonstration of induced crystalline 3D nanostructuration of organic layers

  • Paradinas, Markos|||0000-0003-1006-9506
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Barrena, Esther|||0000-0001-9163-2959
  • Ocal García, Carmen|||0000-0001-8790-8844
The controlled 3D nanostructuration of molecular layers of the semiconducting molecules CH (pentacene) and N,N'-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C8) is addressed. A tip-assisted method using atomic force microscopy (AFM) is developed for removing part of the organic material and relocating it in up to six layer thick nanostructures. Moreover, unconventional molecular scale imaging combining diverse friction force microscopy modes reveals the stacking sequence of the piled layers. In particular, we unambiguously achieve epitaxial growth, an issue of fundamental importance in thin film strategies for the nanostructuration of more efficient organic nanodevices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Boosting Self-Assembly Diversity in the Solid-State by Chiral/Non-Chiral ZnII-Porphyrin Crystallization

  • Qian, Wenjie|||0000-0003-1696-8094
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Rodríguez-Hermida, Sabina|||0000-0001-7671-9925
  • Imaz, Inhar|||0000-0002-0278-1141
  • Wurst, Klaus|||0000-0002-8774-9051
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Barrena, Esther|||0000-0001-9163-2959
  • Amabilino, David B.|||0000-0003-1674-8462
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
A chiral Zn porphyrin derivative 1 and its achiral analogue 2 were studied in the solid state. Considering the rich molecular recognition of designed metalloporphyrins 1 and 2 and their tendency to crystallize, they were recrystallized from two solvent mixtures (CHCl/CHOH and CHCl/hexane). As a result, four different crystalline arrangements (1 a,b and 2 a,b, from 0D to 2D) were obtained. Solid-state studies were performed on all the species to analyze the role played by chirality, solvent mixtures, and surfaces (mica and HOPG) in the supramolecular arrangements. By means of combinations of solvents and substrates a variety of microsized species was obtained, from vesicles to flower-shaped arrays, including geometrical microcrystals. Overall, the results emphasize the environmental susceptibility of metalloporphyrins and how this feature must be taken into account in their design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Misfit Dislocation Guided Topographic and Conduction Patterning in Complex Oxide Epitaxial Thin Films

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Bagués, Núria|||0000-0002-9360-0915
  • Santiso, José|||0000-0003-4274-2101
  • Paradinas, Markos|||0000-0003-1006-9506
  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Casanove, Marie-Jo
  • Martínez, Benjamín|||0000-0001-9879-7748
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in LaSrMnO/LaAlO films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-situ scrutiny of the relationship between polymorphic phases and properties of self-assembled monolayers of a biphenyl based thiol

  • Paradinas, Markos|||0000-0003-1006-9506
  • Munuera, Carmen|||0000-0001-8524-9304
  • Buck, Manfred
  • Ocal García, Carmen|||0000-0001-8790-8844
Two polymorphic phases of ω-(4'-methylbiphenyl-4-yl) butane-1-thiol (BP4) molecules formed on Au(111) were investigated by multidimensional atomic force microscopy, combining conductivity measurements, electrostatic characterization, friction force mapping, and normal force spectroscopy. Based on the same molecular structure but differing in molecular order, packing density, and molecular tilt, the two phases serve as a test bench to establish the structure-property relationships in self-assembled monolayers (SAMs). From a detailed analysis of the charge transport and electrostatics, the contributions of geometrical and electronic effects to the tunneling are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-Arranged Misfit Dislocation Network Formation upon Strain Release in La0.7Sr0.3MnO3/LaAlO3(100) Epitaxial Films under Compressive Strain

  • Santiso, José|||0000-0003-4274-2101
  • Roqueta, Jaume
  • Bagués, Núria|||0000-0002-9360-0915
  • Frontera, Carlos|||0000-0002-0091-4756
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Lu, Qiyang
  • Yildiz, Bilge
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr₂IrO₄ thin films

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • López-Mir, Laura|||0000-0002-5279-8849
  • Paradinas, Markos|||0000-0003-1006-9506
  • Holy, Vaclav
  • Železný, Jakuv
  • Yi, Di
  • Suresha, Siriyara J.
  • Liu, Jian|||0000-0003-4199-1296
  • Rayan Serrao, Claudy
  • Ramesh, Ramamoorthy
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Martí Rovirosa, Xavier
  • Catalan, Gustau|||0000-0003-0214-4828
Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin-orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr₂IrO₄. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Film Quality and Electronic Properties of a Surface-Anchored Metal-Organic Framework Revealed by using a Multi-technique Approach

  • Liu, Jianxi
  • Paradinas, Markos|||0000-0003-1006-9506
  • Heinke, Lars
  • Buck, Manfred
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Mugnaini, Veronica|||0000-0002-5633-489X
  • Wöll, Christof
The virtually unlimited versatility and unparalleled level of control in the design of metal-organic frameworks (MOFs) has recently been shown to also entail a potential for applications based on the electrical and electronic properties of this rich class of materials. At present, methods to provide reliable and reproducible contacts to MOF materials are scarce; therefore, we have carried out a detailed, multi-technique investigation of an empty and loaded prototype MOF, HKUST-1. Epitaxial thin films of this material grown on a substrate by using liquid-phase epitaxy have been studied by cyclic voltammetry, atomic force microscopy, and quartz crystal microbalance and their quality assessed. By using an ionic liquid as the electrolyte, it is shown that redox-active molecules like ferrocene can be embedded in the pores, enabling a change in the overall conductivity of the framework and the study of the redox chemistry of guest molecules inside the MOF.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hetero-bimetallic paddlewheel clusters in coordination polymers formed by a water-induced single-crystal-to-single-crystal transformation

  • Albalad, Jorge|||0000-0001-5850-6723
  • Aríñez Soriano, Javier|||0000-0002-1873-1464
  • Vidal-Gancedo, José|||0000-0002-1853-9675
  • Lloveras Monserrat, Vega|||0000-0002-9653-3340
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Imaz, Inhar|||0000-0002-0278-1141
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(ii)-Zn(ii) and Cu(ii)-Ni(ii) paddlewheel units exhibiting a 1:1 metal ratio were created.