Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multiscale study of mononuclear CoII SMMs based on curcuminoid ligands

  • Díaz-Torres, R.
  • Menelaou, M.
  • Roubeau, O.
  • Sorrenti, A.
  • Brandariz-De-Pedro, G.
  • Sañudo, E.C.
  • Teat, S.J.
  • Fraxedas, J.
  • Ruiz, E.
  • Aliaga-Alcalde, N.
This work introduces a novel family of CoII species having a curcuminoid (CCMoid) ligand, 9Accm, attached, namely Co(9Accm)2(py)2] (1) and Co(9Accm)2(2,2'-bpy)] (2), achieved in high yields by the use of a microwave reactor, and exhibiting two different arrangements for the 9Accm ligands, described as "cis"(2) and "trans"(1). The study of the similarities/differences of the magnetic, luminescent and surface behaviors of the two new species, 1 and 2, is the main objective of the present work. The determined single-crystal structures of both compounds are the only CoII-CCMoid structures described in the literature so far. Both compounds exhibit large positive D values, that of 1 (D = +74 cm-1) being three times larger than that of 2 (D = +24 cm-1), and behave as mononuclear Single-Molecule Magnets (SMMs) in the presence of an external magnetic field. Their similar structures but different anisotropy and SMM characteristics provide, for the first time, deep insight on the spin-orbital effects thanks to the use of CASSCF/NEVPT2 calculations implementing such contributions. Further magnetic studies were performed in solution by means of paramagnetic 1H NMR, where both compounds (1 and 2) are stable in CDCl3 and display high symmetry. Paramagnetic NMR appears to be a useful diagnostic tool for the identification of such molecules in solution, where the resonance values found for the methine group (-CH-) of 9Accm vary significantly depending on the cis or trans disposition of the ligands. Fluorescence studies show that both systems display chelation enhancement of quenching (CHEQ) with regard to the free ligand, while 1 and 2 display similar quantum yields. Deposition of 1-2 on HOPG and Si(100) surfaces using spin-coating was studied using AFM; UV photoemission experiments under the same conditions display 2 as the most robust system. The measured occupied density of states of 2 with UV photoemission is in excellent agreement with theoretical DFT calculations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Capillary and van der Waals interactions on CaF crystals from amplitude modulation AFM force reconstruction profiles under ambient conditions

  • Calò, Annalisa
  • Vidal Robles, Oriol
  • Santos, Sergio
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
There has been much interest in the past two decades to produce experimental force profiles characteristic of the interaction between nanoscale objects or a nanoscale object and a plane. Arguably, the advent of the atomic force microscope AFM was instrumental in driving such efforts because, in principle, force profiles could be recovered directly. Nevertheless, it has taken years before techniques have developed enough as to recover the attractive part of the force with relatively low noise and without missing information on critical ranges, particularly under ambient conditions where capillary interactions are believed to dominate. Thus a systematic study of the different profiles that may arise in such situations is still lacking. Here we employ the surfaces of CaF, on which nanoscale water films form, to report on the range and force profiles that might originate by dynamic capillary interactions occurring between an AFM tip and nanoscale water patches. Three types of force profiles were observed under ambient conditions. One in which the force decay resembles the well-known inverse-square law typical of van der Waals interactions during the first 0.5-1 nm of decay, a second one in which the force decays almost linearly, in relatively good agreement with capillary force predicted by the constant chemical potential approximation, and a third one in which the attractive force is almost constant, i.e., forms a plateau, up to 3-4 nm above the surface when the formation of a capillary neck dominates the tip-sample interaction.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multiscale study of mononuclear Co" SMMs based on curcuminoid ligands

  • Díaz-Torres, Raúl
  • Menelaou, Melita|||0000-0001-7845-8802
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Sorrenti, Alessandro
  • Brandariz de Pedro, Guillem
  • Sañudo, E. Carolina|||0000-0001-9647-6406
  • Teat, Simon J.
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
This work introduces a novel family of Co" species having a curcuminoid (CCMoid) ligand, 9Accm, attached, namely [Co(9Accm)₂(py)₂] (1) and [Co(9Accm)₂(2,20-bpy)] (2), achieved in high yields by the use of a microwave reactor, and exhibiting two different arrangements for the 9Accm ligands, described as "cis"(2) and "trans"(1). The study of the similarities/differences of the magnetic, luminescent and surface behaviors of the two new species, 1 and 2, is the main objective of the present work. The determined single-crystal structures of both compounds are the only Co"-CCMoid structures described in the literature so far. Both compounds exhibit large positive D values, that of 1 (D = +74 cm⁻¹) being three times larger than that of 2 (D = +24 cm⁻¹), and behave as mononuclear Single-Molecule Magnets (SMMs) in the presence of an external magnetic field. Their similar structures but different anisotropy and SMM characteristics provide, for the first time, deep insight on the spin-orbital effects thanks to the use of CASSCF/NEVPT2 calculations implementing such contributions. Further magnetic studies were performed in solution by means of paramagnetic ¹H NMR, where both compounds (1 and 2) are stable in CDCl₃ and display high symmetry. Paramagnetic NMR appears to be a useful diagnostic tool for the identification of such molecules in solution, where the resonance values found for the methine group (-CH-) of 9Accm vary significantly depending on the cis or trans disposition of the ligands. Fluorescence studies show that both systems display chelation enhancement of quenching (CHEQ) with regard to the free ligand, while 1 and 2 display similar quantum yields. Deposition of 1-2 on HOPG and Si(100) surfaces using spin-coating was studied using AFM; UV photoemission experiments under the same conditions display 2 as the most robust system. The measured occupied density of states of 2 with UV photoemission is in excellent agreement with theoretical DFT calculations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-Cut and y-Cut LiNbO3 surfaces, an ambient pressure X-ray photoelectron spectroscopy study

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Calò, Annalisa
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Polarization dependence of water adsorption and desorption on LiNbO₃ surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Imaging water thin films in ambient conditions using Atomic Force Microscopy

  • Santos, Serge
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
All surfaces exposed to ambient conditions are covered by a thin film of water. Other than at high humidity conditions, i.e., relative humidity higher than 80%, those water films have nanoscale thickness. Nevertheless, even the thinnest film can profoundly affect the physical and chemical properties of the substrate. Information on the structure of these water films can be obtained from spectroscopic techniques based on photons, but these usually have poor lateral resolution. When information with nanometer resolution in the three dimensions is needed, for example for surfaces showing heterogeneity in water affinity at the nanoscale, Atomic Force Microscopy (AFM) is the preferred tool since it can provide such resolution while being operated in ambient conditions. A complication in the interpretation of the data arises when using AFM, however, since, in most cases, direct interaction between a solid probe and a solid surface occurs. This induces strong perturbations of the liquid by the probe that should be controlled or avoided. The aim of this review is to provide an overview of different AFM methods developed to overcome this problem, measuring different interactions between the AFM probe and the water films, and to discuss the type of information about the water film that can be obtained from these interactions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Encapsulation and release mechanisms in coordination polymer nanoparticles

  • Amorín Ferré, Laura
  • Busqué, Félix|||0000-0001-7566-4264
  • Bourdelande, Jose|||0000-0001-8956-6921
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Novio, Fernando|||0000-0002-1517-3612
The interplay of guest encapsulation and release mechanisms in nanoscale metal-organic vehicles and its effect on the drug-delivery kinetics of these materials were investigated through a new multidisciplinary approach. Two rationally-designed molecular guests were synthesized, which consist of a red-fluorescent benzophenoxazine dye covalently tethered to a coordinating catechol group and a protected, non-coordinating catechol moiety. This allowed loading of the guests into compositionally and structurally equivalent coordination polymer particles through distinct encapsulation mechanisms: coordination and mechanical entrapment. The two types of particles delivered their fluorescent cargo with remarkably different kinetic profiles, which could be satisfactorily modeled considering degradation- and diffusion-controlled release processes. This demonstrates that careful selection of the method of guest incorporation into coordination polymer nanoparticles allows selective tuning of the rate of drug delivery from these materials and, therefore, of the time window of action of the encapsulated therapeutic agents. Drug-release mechanisms uncovered! Coordination polymer nanoparticles loaded with coordinated and mechanically entrapped fluorescent guests were prepared as benchmark systems to investigate diffusion- and degradation-controlled drug delivery from these materials (see figure).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Elucidation of the wettability of graphene through a multi-length-scale investigation approach

  • Amadei, Carlo A.
  • Lai, Chia-Yun
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Alzina, Francesc|||0000-0002-7082-0624
  • Vecitis, Chad D.
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Chiesa, Matteo
Univocal conclusions around the wettability of graphene exposed to environmental conditions remain elusive despite the recent efforts of several research groups. The main discrepancy rests on the question of whether a graphene monolayer (GML) is transparent or not to water and more generally what the role is that the substrate plays in determining the degree of wetting of the GML. In this work, we investigate the water transparency of GML by means of a multi-length-scale approach. We complement traditional static contact angle measurements and environmental scanning electron microscopy experiments with atomic force microscopy based force spectroscopy to assess the role that intermolecular interactions play in determining the wetting of GML. To gain deeper insight into the wetting transparency issue, we perform experiments on inert metals, such as gold and platinum, covered or not covered by GML. The comparison of the results obtained for different systems (i.e. GML covered and uncovered inert metals), provides unambiguous evidence that supports the non-wetting transparency theory of GML. This work aims to assist the development of technologies based on graphene-water interaction, such as graphitic membranes for water separation processes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Design and Synthesis of a Noninnocent Multitopic Catechol and Pyridine Mixed Ligand, Nanoscale Polymers and Valence Tautomerism

  • Guardingo Melián, Mireia
  • Busqué, Félix|||0000-0001-7566-4264
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The design and synthesis of a new redox-active ligand combining catechol and pyridine units have allowed the achievement of cobalt-based nanoscale coordination polymer particles in a single-step exhibiting a switchable valence tautomeric behavior and thermal hysteresis. The combination of polymerizing capabilities with redox-active responses in a unique ligand leads to the formation of nanoparticles exhibiting a gradual valence tautomeric interconversion in the 35-370 K temperature range. Using one single ligand to obtain these nanoparticles facilitates possible nanostructure formation methodologies. (Chemical Equation Presented).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mussel-inspired hydrophobic coatings for water-repellent textiles and oil removal

  • Garcia Fernandez, Beatriz
  • Saiz-Poseu, Javier|||0000-0002-0259-6851
  • Gras Charles, Roser
  • Hernando, Jordi|||0000-0002-1126-4138
  • Alibés, Ramon|||0000-0002-7997-2691
  • Novio, Fernando|||0000-0002-1517-3612
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A series of catechol derivatives with a different number of linear alkyl chain substituents, and different length, have been shown to polymerize in the presence of aqueous ammonia and air, yielding hydrophobic coatings that present the ability to provide robust and efficient water repellency on weaved textiles, including hydrophilic cotton. The polymerization strategy presented exemplifies an alternative route to established melanin- and polydopamine-like functional coatings, affording designs in which all catechol (adhesive) moieties support specific functional side chains for maximization of the desired (hydrophobic) functionality. The coatings obtained proved effective in the transformation of polyester and cotton weaves, as well as filter paper, into reusable water-repellent, oil-absorbent materials capable of retaining roughly double their weight in model compounds (n-tetradecane and olive oil), as well as of separating water/oil mixtures by simple filtration.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties

  • Guardingo Melián, Mireia
  • Bellido Vera, Elena
  • Miralles, Rosa|||0000-0003-4757-9593
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Tatay, Sergio|||0000-0003-0785-866X
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility and less statistical dispersion. This is attributed to the superior chemical and topographical homogeneity of the SAM coating. Catechol-terminated SAMs are also obtained on high-roughness gold substrates that show the ability to assemble magnetic nanoparticles, despite their lack of enhanced adhesion at the molecular level. Finally, the influence of the catechol group on the formation and quality of the SAM is explored both theoretically (molecular dynamics simulations) and experimentally using direct-write AFM lithography. Highly packed catechol monolayers with a large density and smaller roughness are studied by AFM force-distance curves. These experiments afford adhesion force values higher and much more monodisperse than those reported for polydopamine-like polymeric materials. These results are unique giving valuable information on the effect of molecular organization on the adhesive properties of interphases. Such information is crucial for the development of improved materials and interphases engineered at the molecular level, by chemical design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of polydopamine at the femtoliter scale and confined fabrication of Ag nanoparticles on surfaces

  • Guardingo Melián, Mireia
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Nanoscale polydopamine motives are fabricated on surfaces by deposition of precursor femtolitre droplets with an AFM tip and used as confined reactors to fabricate Ag nanoparticles patterns by in-situ reduction of an Ag+ salt.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Versatile nanostructured materials via direct reaction of functionalized catechols

  • Saiz-Poseu, Javier|||0000-0002-0259-6851
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • García, Beatriz
  • Benaiges Miñarro, Cristina
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Alibés, Ramon|||0000-0002-7997-2691
  • Hernando, Jordi|||0000-0002-1126-4138
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A facile one-step polymerization strategy is explored to achieve novel catechol-based materials. Depending on the functionality of the catechol, the as-prepared product can be used to modify at will the surface tension of nano and bulk structures, from oleo-/hydrophobic to highly hydrophilic. A hydrophobic catechol prepared thus polymerized shows the ability to self-assemble as solid nanoparticles with sticky properties in polar solvent media. Such a versatile concept is ideal for the development of catechol-based multifunctional materials.