Skip to main content

DISPOSITIVOS MOLECULARES

MAT2012-38318-C03-02

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Building Complex Kondo Impurities by Manipulating Entangled Spin Chains

  • Choi, Deung-Jang
  • Robles, Roberto|||0000-0001-7808-0395
  • Yan, Sichao
  • Burgess, Jacob A. J.
  • Rolf-Pissarczyk, Steffen
  • Gauyacq, Jean-Pierre
  • Lorente Palacios, Nicolás
  • Ternes, Markus
  • Loth, Sebastian
The creation of molecule-like structures in which magnetic atoms interact controllably is full of potential for the study of complex or strongly correlated systems. Here, we create spin chains in which a strongly correlated Kondo state emerges from magnetic coupling of transition-metal atoms. We build chains up to ten atoms in length by placing Fe and Mn atoms on a CuN surface with a scanning tunneling microscope. The atoms couple antiferromagnetically via superexchange interaction through the nitrogen atom network of the surface. The emergent Kondo resonance is spatially distributed along the chain. Its strength can be controlled by mixing atoms of different transition metal elements and manipulating their spatial distribution. We show that the Kondo screening of the full chain by the electrons of the nonmagnetic substrate depends on the interatomic entanglement of the spins in the chain, demonstrating the prerequisites to build and probe spatially extended strongly correlated nanostructures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reversible 2D Phase Transition Driven by an Electric Field, Visualization and Control on the Atomic Scale

  • Wortmann, Ben
  • Vörden, D. V.
  • Graf, P.
  • Robles, Roberto|||0000-0001-7808-0395
  • Abufager, Paula|||0000-0001-9973-2938
  • Lorente Palacios, Nicolás
  • Bobisch, Christian A
  • Möller, Rolf
We report on a reversible structural phase transition of a two-dimensional system that can be locally induced by an external electric field. Two different structural configurations may coexist within a CO monolayer on Cu(111). The balance between the two phases can be shifted by an external electric field, causing the domain boundaries to move, increasing the area of the favored phase controllable both in location and size. If the field is further enhanced new domains nucleate. The arrangement of the CO molecules on the Cu surface is observed in real time and real space with atomic resolution while the electric field driving the phase transition is easily varied over a broad range. Together with the well-known molecular manipulation of CO adlayers, our findings open exciting prospects for combining spontaneous long-range order with man-made CO structures such as "molecule cascades" or "molecular graphene". Our new manipulation mode permits us to bridge the gap between fundamental concepts and the fabrication of arbitrary atomic patterns in large scale, by providing unprecedented insight into the physics of structural phase transitions on the atomic scale.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On-Surface Engineering of a Magnetic Organometallic Nanowire

  • Ormaza, Maider|||0000-0002-7278-5308
  • Robles, Roberto|||0000-0001-7808-0395
  • Bachellier, Nicolas
  • Abufager, Paula|||0000-0001-9973-2938
  • Lorente Palacios, Nicolás
  • Limot, Laurent
The manipulation of the molecular spin state by atom doping is an attractive strategy to confer desirable magnetic properties to molecules. Here, we present the formation of novel magnetic metallocenes by following this approach. In particular, two different on-surface procedures to build isolated and layer-integrated Co-ferrocene (CoFc) molecules on a metallic substrate via atomic manipulation and atom deposition are shown. The structure as well as the electronic properties of the so-formed molecule are investigated combining scanning tunneling microscopy and spectroscopy with density functional theory calculations. It is found that unlike single ferrocene a CoFc molecule possesses a magnetic moment as revealed by the Kondo effect. These results correspond to the first controlled procedure toward the development of tailored metallocene-based nanowires with a desired chemical composition, which are predicted to be promising materials for molecular spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biocompatible polydopamine-like particles for the removal of heavy metals at extremely low concentrations

  • Contreras Rodríguez, Ada Rebeca
  • Saiz-Poseu, Javier|||0000-0002-0259-6851
  • Garcia-Pardo, Javier|||0000-0001-9179-6371
  • Garcia Fernandez, Beatriz
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Ojea-Jiménez, Isaac
  • Komilis, Dimitrios|||0000-0002-6606-300X
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Busqué, Félix|||0000-0001-7566-4264
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Font, Xavier|||0000-0003-4981-7436
A family of catechol-based submicron particles, with sizes between 200 and 300 nm, was tested for the removal of Cd(II), Pb(II) and Cr(VI) in water. The highest adsorption capacity was obtained with catecholbased particles in the case of Pb(II), followed by Cd(II). However, the catechol particles failed to adsorb Cr(VI). Our results indicate an up to four-fold increase of the adsorption capacity of these particles compared to that of activated carbon under the same experimental conditions. To check the biocompatible character of the submicron particles, their stability was evaluated in a phosphate buffer solution (PBS) and in a cell culture medium. The results confirmed that the presence of proteins in the medium favors their stability. A bioluminescent Vibrio fischeri test and a cytotoxicity assay on the HepG2 cell line were used to determine that the catechol particles did not exhibit any substantial toxicity. The results show that these catechol-based particles can be used as an efficient biocompatible adsorbent to remove heavy metals at extremely low concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Assembly of ferrocene molecules on metal surfaces revisited

  • Ormaza, Maider|||0000-0002-7278-5308
  • Abufager, Paula|||0000-0001-9973-2938
  • Bachellier, Nicolas
  • Robles, Roberto|||0000-0001-7808-0395
  • Verot, Martin
  • Le Bahers, Tangui
  • Bocquet, Marie-Laure
  • Lorente Palacios, Nicolás
  • Limot, Laurent
Metallocene (MCp) wires have recently attracted considerable interest in relation to molecular spintronics due to predictions concerning their half-metallic nature. This exciting prospect is however hampered by the little and often-contradictory knowledge we have concerning the metallocene self-assembly and interaction with a metal. Here, we elucidate these aspects by focusing on the adsorption of ferrocene on Cu(111) and Cu(100). Combining low-temperature scanning tunneling microscopy and density functional theory calculations, we demonstrate that the two-dimensional molecular arrangement consists of vertical- and horizontal-lying molecules. The noncovalent T-shaped interactions between Cp rings of vertical and horizontal molecules are essential for the stability of the physisorbed molecular layer. These results provide a fresh insight into ferrocene adsorption on surfaces and may serve as an archetypal reference for future work with this important variety of organometallic molecules. (Figure Presented).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Robust spin crossover platforms with synchronized spin switch and polymer phase transition

  • Novio, Fernando|||0000-0002-1517-3612
  • Evangelio Castells, María Emilia
  • Vazquez Mera, Nuria|||0000-0002-7837-7882
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Bellido Vera, Elena
  • Mendes, S.
  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The idea of developing magnetic molecular materials into real functional electronic devices with low-cost and scalable techniques appeared with the emergence of the field several years ago. Today, even though great advances have been done with this aim, the promise of a functional device working at the micro-/nanoscale and at room temperature has unfortunately not completely materialized yet, as their use still strongly depends on the fabrication methodology of a robust device that can be handled and integrated without compromising their functionality. Here we propose the use of polymeric matrices as a platform for the development of such robust switchable structures exhibiting reproducible results independently of the dimension-from macro to micro-/nanoscale-and morphology-from thin-films to nanoparticles and nanoimprinted motives-while allowing to induce an irreversible hysteresis, reminiscent of a non-volatile memory, by synchronization with the polymer phase transition.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of surfactants on the performance of tubular and spherical micromotors-a comparative study

  • Simmchen, Juliane|||0000-0001-9073-9770
  • Magdanz, Veronika
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
  • Chokmaviroj, Sarocha
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Baeza, Alejandro|||0000-0002-9042-8865
  • Schmidt, Oliver G.
The development of artificial micromotors is one of the greatest challenges of modern nanotechnology. Even though many kinds of motors have been published in recent times, systematic studies on the influence of components of the fuel solution are widely missing. Therefore, the autonomous movement of Pt-microtubes and Pt-covered silica particles is comparatively observed in the presence and absence of surfactants in the medium. One representative of each of the three main surfactant classes-anionic (sodium dodecyl sulfate, SDS), cationic (benzalkonium chloride, BACl) and non-ionic (Triton X)-has been chosen and studied.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual T1/T2 MRI contrast agent based on hybrid SPION@coordination polymer nanoparticles

  • Borges, M.
  • Yu, Si-Ming
  • Laromaine, Anna|||0000-0002-4764-0780
  • Roig i Serra, Anna|||0000-0001-6464-7573
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Novio, Fernando|||0000-0002-1517-3612
We report a novel hybrid T /T dual MRI contrast agent by the encapsulation of SPIONs (T contrast agent) into an iron-based coordination polymer with T -weighted signal. This new hybrid material presents improved relaxometry and low cytotoxicity, which make it suitable for its use as contrast agent for MRI.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coordination polymer nanoparticles in medicine

  • Novio, Fernando|||0000-0002-1517-3612
  • Simmchen, Juliane|||0000-0001-9073-9770
  • Vazquez Mera, Nuria|||0000-0002-7837-7882
  • Amorín Ferré, Laura
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Coordination polymer particles (CPPs) have recently emerged as a new family of nanoparticles. The potential multifunctionality of these nanosystems and the flexibility of their coordination chemistry open new perspectives in different fields, including medicine. This review outlines the most recent advances in this field, from CPP synthesis to their use as smart drug delivery systems, bioimaging probes or a combination of both.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Carboxyl group (-CO2H) functionalized coordination polymer nanoparticles as efficient platforms for drug delivery

  • Novio, Fernando|||0000-0002-1517-3612
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Nador, Fabiana|||0000-0003-2502-0430
  • Wnuk, Karolina
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Functionalization of nanoparticles can significantly influence their properties and potential applications. Although researchers can now functionalize metal, metal oxide, and organic polymer nanoparticles with a high degree of precision, controlled surface functionalization of nanoscale coordination polymer particles (CPPs) has remained a significant challenge. The lack of methodology is perhaps one of the greatest roadblocks to the advancement of CPPs into high added-value drug delivery applications. Here, we report having achieved this goal through a stepwise formation and functionalization protocol. We fabricated robust nanoparticles with enhanced thermal and colloidal stabilities by incorporation of carboxyl groups and these surface carboxyl groups could be subsequently functionalized through well-known peptide coupling reactions. The set of chemistries that we employed as proof-of-concept enabled a plethora of new functional improvements for the application of CPPs as drug delivery carriers, including enhanced colloidal stabilities and the incorporation of additional functional groups such as polyethylene glycol (PEG) or fluorescent dyes that enabled tracking of their cellular uptake. Finally, we ascertained the cytotoxicity of the new CPP nanoparticles loaded with camptothecin to human breast adenocarcinoma (MCF-7). Efflux measurements show that the encapsulation of camptothecin enhances the potency of the drug 6.5-fold and increases the drug retention within the cell. Multifunctional CPPs: Robust and biocompatible coordination polymer nanoparticles (CPPs) with enhanced thermal and colloidal stabilities were obtained by incorporation of carboxyl groups on the amorphous structure. The surface carboxyl groups can be subsequently functionalized, generating a multifunctional nanoplatform for theranostic applications such as drug delivery and imaging (see scheme; EDC=1-ethyl-3-(3-dimethylaminopropyl)carbodiimide; NHS=N-hydroxysuccinimide).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Encapsulation and release mechanisms in coordination polymer nanoparticles

  • Amorín Ferré, Laura
  • Busqué, Félix|||0000-0001-7566-4264
  • Bourdelande, Jose|||0000-0001-8956-6921
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Hernando, Jordi|||0000-0002-1126-4138
  • Novio, Fernando|||0000-0002-1517-3612
The interplay of guest encapsulation and release mechanisms in nanoscale metal-organic vehicles and its effect on the drug-delivery kinetics of these materials were investigated through a new multidisciplinary approach. Two rationally-designed molecular guests were synthesized, which consist of a red-fluorescent benzophenoxazine dye covalently tethered to a coordinating catechol group and a protected, non-coordinating catechol moiety. This allowed loading of the guests into compositionally and structurally equivalent coordination polymer particles through distinct encapsulation mechanisms: coordination and mechanical entrapment. The two types of particles delivered their fluorescent cargo with remarkably different kinetic profiles, which could be satisfactorily modeled considering degradation- and diffusion-controlled release processes. This demonstrates that careful selection of the method of guest incorporation into coordination polymer nanoparticles allows selective tuning of the rate of drug delivery from these materials and, therefore, of the time window of action of the encapsulated therapeutic agents. Drug-release mechanisms uncovered! Coordination polymer nanoparticles loaded with coordinated and mechanically entrapped fluorescent guests were prepared as benchmark systems to investigate diffusion- and degradation-controlled drug delivery from these materials (see figure).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coordination Polymer Particles with ligand-centred pH-responses and spin transition, Nanoscale coordination polymers with ligand-centred pHresponses and spin transition

  • Nador, Fabiana|||0000-0003-2502-0430
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A bis-catechol ligand connected through an imine bond is used to fabricate switchable coordination polymer particles with pH-tuned spin transition responses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrophobic coordination polymer nanoparticles and application for oil-water separation

  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Catechol chemistry is used to fabricate coordination polymer nanoparticles bearing long alkyl chains with enhanced thermal and colloidal stabilities and applications for hydrophobic surfaces and oil-water separation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Covalent Grafting of Coordination Polymers on Surfaces, The Case of Hybrid Valence Tautomeric Interphases

  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
We have developed a novel approach for grafting coordination polymers, structured as nanoparticles bearing surface reactive carboxylic groups, to amino-functionalized surfaces through a simple carbodiimide-mediated coupling reaction. As a proof-of-concept to validate our approach, and on the quest for novel hybrid interphases with potential technological applications, we have used valence tautomeric nanoparticles exhibiting spin transition at or around room temperature. SEM and AFM characterization reveal that the nanoparticles were organized chiefly into a single monolayer while X-ray photoelectron spectroscopy (XPS) measurements confirm that the nanoparticles retain a temperature-induced electronic redistribution upon surface anchorage. Our results represent an effective approach towards the challenging manufacture of coordination polymers. CPPs immobilization: A generic approach for immobilizing coordination polymer nanoparticles (CPPs) on gold surfaces is reported. The protocol involves covalent bonding between amino-terminated alkyl chains on the gold surface and carboxylic groups on the CPPs surface. The thickness of the nanoparticle monolayer is comparable to the nanoparticle size. The nanoparticles used exhibit valence tautomerism in bulk and keep this property after surface attachment, as corroborated by X-ray photoelectron spectroscopy (XPS) measurements. Our results represent an effective approach towards the challenging manufacture of coordination polymers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spin transport in dangling-bond wires on doped H-passivated Si(100)

  • Kepenekian, Mikaël|||0000-0001-5192-5896
  • Robles, Roberto|||0000-0001-7808-0395
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Lorente, Nicolás
New advances in single-atom manipulation are leading to the creation of atomic structures on H-passivated Si surfaces with functionalities important for the development of atomic and molecular based technologies. We perform total-energy and electron-transport calculations to reveal the properties and understand the features of atomic wires crafted by H removal from the surface. The presence of dopants radically change the wire properties. Our calculations show that dopants have a tendency to approach the dangling-bond wires, and in these conditions, transport is enhanced and spin selective. These results have important implications in the development of atomic-scale spintronics showing that boron, and to a lesser extent phosphorous, convert the wires in high-quality spin filters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Design and Synthesis of a Noninnocent Multitopic Catechol and Pyridine Mixed Ligand, Nanoscale Polymers and Valence Tautomerism

  • Guardingo Melián, Mireia
  • Busqué, Félix|||0000-0001-7566-4264
  • Novio, Fernando|||0000-0002-1517-3612
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The design and synthesis of a new redox-active ligand combining catechol and pyridine units have allowed the achievement of cobalt-based nanoscale coordination polymer particles in a single-step exhibiting a switchable valence tautomeric behavior and thermal hysteresis. The combination of polymerizing capabilities with redox-active responses in a unique ligand leads to the formation of nanoparticles exhibiting a gradual valence tautomeric interconversion in the 35-370 K temperature range. Using one single ligand to obtain these nanoparticles facilitates possible nanostructure formation methodologies. (Chemical Equation Presented).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mussel-inspired hydrophobic coatings for water-repellent textiles and oil removal

  • Garcia Fernandez, Beatriz
  • Saiz-Poseu, Javier|||0000-0002-0259-6851
  • Gras Charles, Roser
  • Hernando, Jordi|||0000-0002-1126-4138
  • Alibés, Ramon|||0000-0002-7997-2691
  • Novio, Fernando|||0000-0002-1517-3612
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A series of catechol derivatives with a different number of linear alkyl chain substituents, and different length, have been shown to polymerize in the presence of aqueous ammonia and air, yielding hydrophobic coatings that present the ability to provide robust and efficient water repellency on weaved textiles, including hydrophilic cotton. The polymerization strategy presented exemplifies an alternative route to established melanin- and polydopamine-like functional coatings, affording designs in which all catechol (adhesive) moieties support specific functional side chains for maximization of the desired (hydrophobic) functionality. The coatings obtained proved effective in the transformation of polyester and cotton weaves, as well as filter paper, into reusable water-repellent, oil-absorbent materials capable of retaining roughly double their weight in model compounds (n-tetradecane and olive oil), as well as of separating water/oil mixtures by simple filtration.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pt(IV)-based nanoscale coordination polymers, antitumor activity, cellular uptake and interactions with nuclear DNA

  • Adarsh, Nayarassery N.|||0000-0003-2262-8512
  • Frias Botella, Carolina|||0000-0002-2393-707X
  • Ponnoth Lohidakshan, T. M.
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Novio, Fernando|||0000-0002-1517-3612
  • Garcia-Pardo, Javier|||0000-0001-9179-6371
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Cisplatin has been for many years the gold standard chemotherapeutic drug for the treatment of a wide range of solid tumors, even though its use is commonly associated with serious side effects including non-selective toxicity, myelosuppression or development of cisplatin resistance, among others complications. Over the last decade, a number of nanoparticle formulations were developed to reduce its side effects and improve the selectivity and efficacy of this drug. In this study, we have developed a novel nanoparticle platform based on nanoscale coordination polymer named (Zn-Pt(IV)-NCPs) which contains a Pt(IV) prodrug, Zn and the linker ligand 1,4-Bis(imidazol-1-ylmethyl)benzene (bix). The main objective has been to gain insights into the mechanism of action of this nanostructured material in comparison with cisplatin and the free Pt(IV) prodrug in order to establish a correlation between nanostructuration and therapeutic activity. Zn-Pt(IV)-NCPs nanoparticles displayed an average size close to 200 nm as determined by DLS, a good stability in physiologic environments, and a controlled drug release of Pt. In vitro studies demonstrated that Pt(IV)-NCPs showed an enhanced cytotoxic effect against cell culture of cervical cancer, neuroblastoma and human adenocarcinoma cells in comparison with free Pt(IV) prodrug. Although no difference in cell uptake of Pt was observed for any of the three cell lines assayed, a higher amount of Pt bound to the DNA was found in the cells treated with the nanostructured Pt(IV) prodrug. These studies suggest that the nanostructuration of the prodrug facilitate its activation and induce a change in the mechanism of action related to an increased interaction with the DNA as corroborated by the studies of direct interaction of the Pt(IV) prodrug, nanostructured or not, with DNA.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ligand and solvent effects in the formation and self-assembly of a metallosupramolecular cage

  • Adarsh, Nayarassery N.|||0000-0003-2262-8512
  • Chakraborty, Amarnath
  • Tarrés Schüler, Màrius
  • Dey, Surjendu
  • Novio, Fernando|||0000-0002-1517-3612
  • Chattopadhyay, Basab
  • Ribas, Xavi|||0000-0002-2850-4409
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Two bis-pyridyl-bis-urea ligands namely N,N'-bis-(3-pyridyl)diphenylmethylene-bis-urea (L1) and N,N'-bis-(3-picolyl)diphenylmethylene-bis-urea (L2) have been reacted with a Cu(ii) salt resulting in the formation of a metallosupramolecular cage [{Cu(μ-L1)(DMSO)(HO)}·SO·X] (1) and a one-dimensional coordination polymer [{Cu(1)(μ-L2)(HO)}{Cu(2)(μ-L2)(HO)}·2SO·9HO·X] (2) (where DMSO = dimethylsulfoxide, and X = disordered lattice included solvent molecules), respectively. The single crystal structures of 1 and 2 are discussed in the context of the effect of the ligands, particularly the hydrogen bonding functionality of the ligand, on the supramolecular structural diversities observed in these metal organic compounds. The supramolecular packing of 1 is clearly influenced by the nature of the solvent and ligand used; mixtures of DMSO/MeOH or DMSO/HO lead to the formation of blue crystals or a hydrogel, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Orbital redistribution in molecular nanostructures mediated by metal-organic bonds

  • Yang, Zechao
  • Corso, Martina|||0000-0002-8592-1284
  • Robles, Roberto|||0000-0001-7808-0395
  • Lotze, Christian
  • Fitzner, Roland
  • Mena-Osteritz, Elena
  • Bäuerle, Peter
  • Franke, Katharina J.
  • Pascual, José I.|||0000-0002-7152-4747
Dicyanovinyl-quinquethiophene (DCV5T-Me) is a prototype conjugated oligomer for highly efficient organic solar cells. This class of oligothiophenes are built up by an electron-rich donor (D) backbone and terminal electron-deficient acceptor (A) moieties. Here, we investigated its structural and electronic properties when it is adsorbed on a Au(111) surface using low temperature scanning tunneling microscopy/spectroscopy (STM/STS) and atomic force microscopy (AFM). We find that DCV5T-Me self-assembles in extended chains, stabilized by intercalated Au atoms. The effect of metal-ligand hybridization with Au adatoms causes an energetic downshift of the DCV5T-Me lowest unoccupied molecular orbital (LUMO) with respect to the uncoordinated molecules on the surface. The asymmetric coordination of a gold atom to only one molecular end group leads to an asymmetric localization of the LUMO and LUMO+1 states at opposite sides. Using model density functional theory (DFT) calculations, we explain such orbital reshaping as a consequence of linear combinations of the original LUMO and LUMO+1 orbitals, mixed by the attachment of a bridging Au adatom. Our study shows that the alignment of molecular orbitals and their distribution within individual molecules can be modified by contacting them to metal atoms in specific sites.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improving catalase-based propelled motor endurance by enzyme encapsulation

  • Simmchen, Juliane|||0000-0001-9073-9770
  • Baeza, Alejandro|||0000-0002-9042-8865
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Vallet Regí, María|||0000-0002-6104-4889
Biocatalytic propulsion is expected to play an important role in the future of micromotors as it might drastically increase the number of available fuelling reactions. However, most of the enzyme-propelled micromotors so far reported still rely on the degradation of peroxide by catalase, in spite of being vulnerable to relatively high peroxide concentrations. To overcome this limitation, herein we present a strategy to encapsulate the catalase and to graft the resulting enzyme capsules on motor particles. Significant improvement of the stability in the presence of peroxide and other aggressive agents has been observed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties

  • Guardingo Melián, Mireia
  • Bellido Vera, Elena
  • Miralles, Rosa|||0000-0003-4757-9593
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Tatay, Sergio|||0000-0003-0785-866X
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility and less statistical dispersion. This is attributed to the superior chemical and topographical homogeneity of the SAM coating. Catechol-terminated SAMs are also obtained on high-roughness gold substrates that show the ability to assemble magnetic nanoparticles, despite their lack of enhanced adhesion at the molecular level. Finally, the influence of the catechol group on the formation and quality of the SAM is explored both theoretically (molecular dynamics simulations) and experimentally using direct-write AFM lithography. Highly packed catechol monolayers with a large density and smaller roughness are studied by AFM force-distance curves. These experiments afford adhesion force values higher and much more monodisperse than those reported for polydopamine-like polymeric materials. These results are unique giving valuable information on the effect of molecular organization on the adhesive properties of interphases. Such information is crucial for the development of improved materials and interphases engineered at the molecular level, by chemical design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlling spin transition in one-dimensional coordination polymers through polymorphism

  • Novio, Fernando|||0000-0002-1517-3612
  • Campo, Javier|||0000-0002-3600-1721
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A series of polymer 1 microcrystals with several different morphologies have been systematically synthesized by controlling experimental parameters, namely concentration of reactants, temperature, solvent nature, and the use of surfactants, and their valence tautomerism (VT) has been studied by combined electron microscopy, X-ray diffraction data, and magnetization. Our results indicate that all of them can be grouped exclusively into two different crystalline phases, or a mixture of them, that critically determine the VT process, independent of the morphology and/or dimensions of the crystals. Moreover, a difference in the critical temperature of both phases by more than 50 K allows us to regulate VT. These results head the use of valence tautomeric 1D polymers in devices where strict control and reproducibility of the switching behavior at different length scales and integration procedures is highly required.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of polydopamine at the femtoliter scale and confined fabrication of Ag nanoparticles on surfaces

  • Guardingo Melián, Mireia
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Nanoscale polydopamine motives are fabricated on surfaces by deposition of precursor femtolitre droplets with an AFM tip and used as confined reactors to fabricate Ag nanoparticles patterns by in-situ reduction of an Ag+ salt.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of nanoscale coordination polymers in femtoliter reactors on surfaces

  • Guardingo Melián, Mireia
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Novio, Fernando|||0000-0002-1517-3612
  • Bellido Vera, Elena
  • Busqué, Félix|||0000-0001-7566-4264
  • Molnár, Gábor
  • Bousseksou, Azzedine|||0000-0002-1619-532X
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
In the present work, AFM-assisted lithography was used to perform the synthesis of a coordination polymer inside femtoliter droplets deposited on surfaces. For this, solutions of the metal salt and the organic ligand were independently transferred to adjacent tips of the same AFM probe array and were sequentially delivered on the same position of the surface, creating femtoliter-sized reaction vessels where the coordination reaction and particle growth occurred. Alternatively, the two reagents were mixed in the cantilever array by loading an excess of the inks, and transferred to the surface immediately after, before the precipitation of the coordination polymer took place. The in situ synthesis allowed the reproducible obtaining of round-shaped coordination polymer nanostructures with control over their XY positioning on the surface, as characterized by microscopy and spectroscopy techniques.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermally switchable molecular upconversion emission

  • Massaro, Giuseppina|||0000-0002-3971-8453
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Roscini, Claudio|||0000-0002-0157-8934
  • Latterini, Loredana|||0000-0002-1021-9423
In this work a novel strategy is introduced to achieve thermally switchable emission from photon upconversion (UC) systems based on organic dyes. When these molecules were dissolved at low concentrations in phase-change media, a reversible, sharp, and nearly complete interconversion from blue upconverted emission to red luminescence was observed around the solid-to-liquid transition of the system. This result was rationalized in terms of dye aggregation, which selectively occurs in the solid state and dramatically enhances the inter-chromophoric energy transfer processes leading to UC. Notably, this behavior is extendable to different media and dyes, which allows an easy tuning of the switching temperature and emission colors. In addition, with proper selection of the phase-change medium, our strategy permits facile preparation of solid molecular materials showing photon UC at room temperature and even at sub-micromolar dye concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Versatile nanostructured materials via direct reaction of functionalized catechols

  • Saiz-Poseu, Javier|||0000-0002-0259-6851
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • García, Beatriz
  • Benaiges Miñarro, Cristina
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Alibés, Ramon|||0000-0002-7997-2691
  • Hernando, Jordi|||0000-0002-1126-4138
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
A facile one-step polymerization strategy is explored to achieve novel catechol-based materials. Depending on the functionality of the catechol, the as-prepared product can be used to modify at will the surface tension of nano and bulk structures, from oleo-/hydrophobic to highly hydrophilic. A hydrophobic catechol prepared thus polymerized shows the ability to self-assemble as solid nanoparticles with sticky properties in polar solvent media. Such a versatile concept is ideal for the development of catechol-based multifunctional materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Liquid-filled valence tautomeric microcapsules, a solid material with solution-like behavior

  • Vazquez Mera, Nuria|||0000-0002-7837-7882
  • Roscini, Claudio|||0000-0002-0157-8934
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The integration of stimuli-responsive valence tautomeric (VT) molecular systems into solid materials without compromising their functionality is a major bottleneck for the use of these compounds in high-added value applications. In this work, an innovative, simple, and universal approach is described to tackle this challenge based on the confinement of the active species into liquid-filled polymeric capsules. A microstructured solid with optimized solution-like behavior is obtained in this way, whose VT properties can be rationally tuned upon variation of the encapsulated solvent. Incorporation of the resulting capsules into thin films or other matrices of interest allows successful transfer of valence tautomerism from the liquid phase to solid materials, thus paving the way to the fabrication of functional devices based on spin transition compounds.