Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 64
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Thermal activation of catalytic microjets in blood samples using microfluidic chips

  • Soler, Lluís
  • Martínez Cisneros, Cynthia Susana
  • Swiersy, Anka
  • Sánchez, Samuel
  • G. Schmidt, Oliver
We demonstrate that catalytic microjet engines can out-swim high complex media composed of red blood cells and serum. Despite the challenge presented by the high viscosity of the solution at room tem perature, the catalytic microjet s can b activatedat physiological temperature and, consequently, selfpropelin diluted solutions of blood samples. We prove thatthese microjets self-propel in 10× diluted blood samples usingmicrofluidic chips., European Commission European Community's Seventh Framework Program Volkswagen Foundation (# 86 362)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Ultracompact three-dimensional tubular conductivity microsensors for ionic and biosensing applications

  • Martínez Cisneros, Cynthia Susana
  • Sánchez, Samuel
  • Xi, Wang
  • Schmidt, Oliver G.
We present ultracompact three-dimensional tubular structures integrating Au-based electrodes as impedimetricmicrosensors for the in-flow determination of mono- and divalent ionic species and HeLa cells. The microsensors show animproved performance of 2 orders of magnitude (limit of detection = 0.1 nM for KCl) compared to conventional planarconductivity detection systems integrated in microfluidic platforms and the capability to detect single HeLa cells in flowingphosphate buffered saline. These highly integrated conductivity tubular sensors thus open new possibilities for lab-in-a-tubedevices for bioapplications such as biosensing and bioelectronics., The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007 2013)/ERC Grant Agreement 311529 and the Volkswagen foundation (no. 86362)., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Trapping self-propelled micromotors with microfabricated chevron and heart-shaped chips

  • Restrepo Pérez, Laura
  • Fabrega Soler, Lluís
  • Martínez Cisneros, Cynthia Susana
  • Sánchez, Samuel
  • Schmidt, Oliver G.
We demonstrate that catalytic micromotors can be trapped in microfluidic chips containing chevron and heart-shaped structures. Despite the challenge presented by the reduced size of the traps, microfluidic chips with different trapping geometries can be fabricated via replica moulding. We prove that these microfluidic chips can capture micromotors without the need for any external mechanism to control their motion., The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no. [311529]. S.S. and L.S. thank DFG (grant SA 2525/1-1) for financial support.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Flexible sensors for biomedical technology

  • Vilela, Diana
  • Romeo, Agostino
  • Sánchez Ordóñez, Samuel
Flexible sensing devices have gained a great deal of attention among the scientific community in recent years. The application of flexible sensors spans over several fields, including medicine, industrial automation, robotics, security, and human-machine interfacing. In particular, non-invasive health-monitoring devices are expected to play a key role in the improvement of patient life and in reducing costs associated with clinical and biomedical diagnostic procedures. Here, we focus on recent advances achieved in flexible devices applied on the human skin for biomedical and healthcare purposes.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Fuel-free nanocap-like motors actuated under visible light

  • Wang, Xu
  • Srdihar, Varum
  • Guo, Surong
  • Talebi, Nahid
  • Miguel López, Albert
  • Hahn, Kersten
  • van Aken, Peter A.
  • Sánchez Ordóñez, Samuel
The motion of nanomotors triggered by light sources will provide new alternative routes to power nanoarchitectures without the need of chemical fuels. However, most light-driven nanomotors are triggered by UV-light, near infrared reflection, or laser sources. It is demonstrated that nanocap shaped Au/TiO2 nanomotors (175 nm in diameter) display increased Brownian motion in the presence of broad spectrum visible light. The motion results from the surface plasmon resonance effect leading to self-electrophoresis between the Au and TiO2 layers, a mechanism called plasmonic photocatalytic effect in the field of photocatalysis. This mechanism is experimentally characterized by electron energy loss spectroscopy, energy-filtered transmission electron microscopy, and optical video tracking. This mechanism is also studied in a more theoretical manner using numerical finite-difference time-domain simulations. The ability to power nanomaterials with visible light may result in entirely new applications for externally powered micro/nanomotors.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Motion control of urea powered biocompatible hollow microcapsules

  • Ma, Xing
  • Wang, Xu
  • Hahn, Kersten
  • Sánchez Ordóñez, Samuel
The quest for biocompatible micro-swimmers powered by compatible fuel and with full motion control over their self-propulsion is a long-standing challenge in the field of active matter and microrobotics. Here, we present an active hybrid microcapsule motor based on Janus hollow mesoporous silica micro particles (JHP) powered by the bio-catalytic decomposition of urea at physiological concentrations. The directional self-propelled motion lasts longer than 10 minutes with an average velocity of up to 5 body lengths per second. Additionally, we control the velocity of the micro-motor by chemically inhibiting and reactivating the enzymatic activity of urease. The incorporation of magnetic material within the Janus structure provides remote magnetic control on the movement direction. Furthermore, the mesoporous/hollow structure can load both small molecules and larger particles up to hundreds of nano-meters, making the hybrid micro-motor an active and controllable drug delivery micro-system.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Platinum-free cobalt ferrite based micromotors for antibiotic removal

  • Parmar, Jemish
  • Villa, Katherine
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
Self-propelled micromotors have previously shown to enhance pollutant removal compared to non-motile nano-micro particles. However, these systems are expensive, difficult to scale-up and require surfactant for efficient work. Efficient and inexpensive micromotors are desirable for their practical applications in water treatment technologies. We describe cobalt-ferrite based micromotors (CFO micromotors) fabricated by a facile and scalable synthesis, that produce hydroxyl radicals via Fenton-like reaction and take advantage of oxygen gas generated during this reaction for self-propulsion. Once the reaction is complete, the CFO micromotors can be easily separated and collected due to their magnetic nature. The CFO micromotors are demonstrated for highly efficient advanced oxidative removal of tetracycline antibiotic from the water. Furthermore, the effects of different concentrations of micromotors and hydrogen peroxide on the antibiotic degradation were studied, as well as the generation of the highly reactive hydroxyl radicals responsible for the oxidation reaction.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Pushing bacterial biohybrids to in vivo applications

  • Stanton, Morgan M.
  • Sánchez Ordóñez, Samuel
Bacterial biohybrids use the energy of bacteria to manipulate synthetic materials with the goal of solving biomedical problems at the micro- and nanoscale. We explore current in vitro studies of bacterial biohybrids, the first attempts at in vivo biohybrid research, and problems to be addressed for the future.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Enzyme-powered hollow mesoporous Janus nanomotors

  • Ma, Xing
  • Jannasch, Anita
  • Albrecth, Urban-Raphael
  • Hahn, Kersten
  • Miguel López, Albert
  • Schäffer, Erik
  • Sánchez Ordóñez, Samuel
The development of synthetic nanomotors for technological applications in particular for life science and nanomedicine is a key focus of current basic research. However, it has been challenging to make active nanosystems based on biocompatible materials consuming nontoxic fuels for providing self-propulsion. Here, we fabricate self-propelled Janus nanomotors based on hollow mesoporous silica nanoparticles (HMSNPs), which are powered by biocatalytic reactions of three different enzymes: catalase, urease, and glucose oxidase (GOx). The active motion is characterized by a mean-square displacement (MSD) analysis of optical video recordings and confirmed by dynamic light scattering (DLS) measurements. We found that the apparent diffusion coefficient was enhanced by up to 83%. In addition, using optical tweezers, we directly measured a holding force of 64 ± 16 fN, which was necessary to counteract the effective self-propulsion force generated by a single nanomotor. The successful demonstration of biocompatible enzyme-powered active nanomotors using biologically benign fuels has a great potential for future biomedical applications.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Artificial micro-swimmers in simulated natural environments

  • Katuri, Jaideep
  • Seo, K. D.
  • Kim, D. S.
  • Sánchez Ordóñez, Samuel
Microswimmers, such as bacteria, are known to show different behaviours depending on their local environment. They identify spatial chemical gradients to find nutrient rich areas (chemotaxis) and interact with shear flows to accumulate in high shear regions. Recently, artificial microswimmers have been developed which mimic their natural counterparts in many ways. One of the exciting topics in this field is to study these artificial motors in several natural settings like the ones bacteria interact with. In this Focus article, we summarize recent observations of artificial swimmers in chemical gradients, shear flows and other interesting natural environments simulated in the lab using microfluidics and nanotechnology.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Medical imaging for the tracking of micromotors

  • Vilela, Diana
  • Cossío, Unai
  • Parmar, Jemish
  • Martínez Villacorta, Angel M.
  • Gómez Vallejo, Vanessa
  • Llop, Jordi
  • Sánchez Ordóñez, Samuel
Micro/nanomotors are useful tools for several biomedical applications, including targeted drug delivery and minimally invasive microsurgeries. However, major challenges such as in vivo imaging need to be addressed before they can be safely applied on a living body. Here, we show that positron emission tomography (PET), a molecular imaging technique widely used in medical imaging, can also be used to track a large population of tubular Au/PEDOT/Pt micromotors. Chemisorption of an iodine isotope onto the micromotor’s Au surface rendered them detectable by PET, and we could track their movements in a tubular phantom over time frames of up to 15 min. In a second set of experiments, micromotors and the bubbles released during self-propulsion were optically tracked by video imaging and bright-field microscopy. The results from direct optical tracking agreed with those from PET tracking, demonstrating that PET is a suitable technique for the imaging of large populations of active micromotors in opaque environments, thus opening opportunities for the use of this mature imaging technology for the in vivo localization of artificial swimmers.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Smart biosensors for multiplexed and fully integrated point-of-care diagnostics

  • Romeo, Agostino
  • Leung, T. S.
  • Sánchez Ordóñez, Samuel
Point-of-care diagnostics (PoC) and personalised medicine are highly valuable for the improvement of world health. Smartphone PoC platforms which precisely diagnose diseases and track their development through the detection of several bioanalytes represent one of the newest and most exciting advancements towards mass-screening applications. Here we focus on recent advances in both multiplexed and smartphone integrated PoC sensors.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Self-propelling micro-nanorobots: challenges and future perspectives in nanomedicine

  • Ma, Xing
  • Sánchez Ordóñez, Samuel
Nanorobots are envisioned since decades to be the future of nanomedicine in the active transport of therapeutics to specific locations. Here we comment on the progress that has emerged over the last few years towards that dream, and the challenges that need to be overcome to make it real.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Magnetotactic bacteria powered biohybrids target E. coli biofilms

  • Stanton, Morgan M.
  • Park, Byung-Wook
  • Vilela, Diana
  • Bente, Klaas
  • Faivre, Damien
  • Sitti, Metin
  • Sánchez Ordóñez, Samuel
Biofilm colonies are typically resistant to general antibiotic treatment and require targeted methods for their removal. One of these methods include the use of nanoparticles as carriers for antibiotic delivery, where they randomly circulate in fluid until they make contact with the infected areas. However, the required proximity of the particles to the biofilm results in only moderate efficacy. We demonstrate here that the non-pathogenic magnetotactic bacteria, Magnetosopirrillum gryphiswalense (MSR-1), can be integrated with drug-loaded mesoporous silica microtubes (MSMs) to build controllable microswimmers (biohybrids) capable of antibiotic delivery to target an infectious biofilm. Applying external magnetic guidance capability and swimming power of the MSR-1 cells, the biohybrids are directed to and forcefully pushed into matured Escherichia coli (E. coli) biofilms. Release of the antibiotic, ciprofloxacin (CFX), is triggered by the acidic microenvironment of the biofilm ensuring an efficient drug delivery system. The results reveal the capabilities of a non-pathogenic bacteria species to target and dismantle harmful biofilms, indicating biohybrid systems have great potential for anti-biofilm applications.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Biohybrid microtube swimmers driven by single captured bacteria

  • Stanton, Morgan M.
  • Park, Byung-Wook
  • Miguel López, Albert
  • Ma, Xing
  • Sitti, Metin
  • Sánchez Ordóñez, Samuel
Bacteria biohybrids employ the motility and power of swimming bacteria to carry and maneuver microscale particles. They have the potential to perform microdrug and cargo delivery in vivo, but have been limited by poor design, reduced swimming capabilities, and impeded functionality. To address these challenge, motile Escherichia coli are captured inside electropolymerized microtubes, exhibiting the first report of a bacteria microswimmer that does not utilize a spherical particle chassis. Single bacterium becomes partially trapped within the tube and becomes a bioengine to push the microtube though biological media. Microtubes are modified with "smart" material properties for motion control, including a bacteria-attractant polydopamine inner layer, addition of magnetic components for external guidance, and a biochemical kill trigger to cease bacterium swimming on demand. Swimming dynamics of the bacteria biohybrid are quantified by comparing "length of protrusion" of bacteria from the microtubes with respect to changes in angular autocorrelation and swimmer mean squared displacement. The multifunctional microtubular swimmers present a new generation of biocompatible micromotors toward future microbiorobots and minimally invasive medical applications.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Self-assembly of micromachining systems powered by Janus micromotors

  • Maggi, Claudio
  • Simmchen, Juliane
  • Saglimbeni, Filipo
  • Katuri, Jaideep
  • Dipalo, Michele
  • Angelis, Francesco De
  • Sánchez Ordóñez, Samuel
  • Leonardo, Roberto Di
Janus particles can self-assemble around microfabricated gears in reproducible configurations with a high degree of spatial and orientational order. The final configuration maximizes the torque applied on the rotor leading to a unidirectional and steady rotating motion. The interplay between geometry and dynamical behavior leads to the self-assembly of Janus micromotors starting from randomly distributed particles.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Core-shell microspheres for the ultrafast degradation of estrogen hormone at neutral pH

  • Villa, Katherine
  • Parmar, Jemish
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
In the past few years there has been growing concern about human exposure to endocrine disrupting chemicals. This kind of pollutants can bioaccumulate in aquatic organisms and lead to serious health problems, especially affecting child development. Many efforts have been devoted to achieving the efficient removal of such refractory organics. In this regard, a novel catalyst based on the combination of α-FeOOH and MnO2@MnCO3 catalysts has been developed by up-scalable techniques from cheap precursors and tested in the photo-Fenton-like degradation of an endocrine disruptor. Almost total degradation of 17α-ethynylestradiol hormone was achieved after only 2 min of simulated solar irradiation at neutral pH. The outstanding performance of FeOOH@MnO2@MnCO3 microspheres was mainly attributed to a larger generation of hydroxyl radicals, which are the primary mediators of the total oxidation for this hormone. This work contributes to the development of more cost-effective systems for the rapid and efficient removal of persistent organic pollutants present in sewage plant effluents under direct solar light.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Metal-oxide-based microjets for the simultaneous removal of organic pollutants and heavy metals

  • Villa, Katherine
  • Parmar, Jemish
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
Water contamination from industrial and anthropogenic activities is nowadays a major issue in many countries worldwide. To address this problem, efficient water treatment technologies are required. Recent efforts have focused on the development of self-propelled micromotors that provide enhanced micromixing and mass transfer by the transportation of reactive species, resulting in higher decontamination rates. However, a real application of these micromotors is still limited due to the high cost associated to their fabrication process. Here, we present Fe2O3-decorated SiO2/MnO2 microjets for the simultaneous removal of industrial organic pollutants and heavy metals present in wastewater. These microjets were synthesized by low-cost and scalable methods. They exhibit an average speed of 485 ± 32 μm s–1 (∼28 body length per s) at 7% H2O2, which is the highest reported for MnO2-based tubular micromotors. Furthermore, the photocatalytic and adsorbent properties of the microjets enable the efficient degradation of organic pollutants, such as tetracycline and rhodamine B under visible light irradiation, as well as the removal of heavy metal ions, such as Cd2+ and Pb2+.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Reusable and long-lasting active microcleaners for heterogeneous water remediation

  • Parmar, Jemish
  • Vilela, Diana
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Esqué de los Ojos, Daniel
  • Sort, Jordi
  • Sánchez Ordóñez, Samuel
Self-powered micromachines are promising tools for future environmental remediation technology. Waste-water treatment and water reuse is an essential part of environmental sustainability. Herein, we present reusable Fe/Pt multi-functional active microcleaners that are capable of degrading organic pollutants (malachite green and 4-nitrophenol) by generated hydroxyl radicals via a Fenton-like reaction. Various different properties of microcleaners, such as the effect of their size, short-term storage, long-term storage, reusability, continuous swimming capability, surface composition, and mechanical properties, are studied. It is found that these microcleaners can continuously swim for more than 24 hours and can be stored more than 5 weeks during multiple cleaning cycles. The produced microcleaners can also be reused, which reduces the cost of the process. During the reuse cycles the outer iron surface of the Fe/Pt microcleaners generates the in-situ, heterogeneous Fenton catalyst and releases a low concentration of iron into the treated water, while the mechanical properties also appear to be improved due to both its surface composition and structural changes. The microcleaners are characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), nanoindentation, and finite-element modeling (FEM).
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Motion in microfluidic ratchets

  • Caballero Vila, David
  • Katuri, Jaideep
  • Samitier i Martí, Josep
  • Sánchez Ordóñez, Samuel
The ubiquitous random motion of mesoscopic active particles, such as cells, can be "rectified" or directed by embedding the particles in systems containing local and periodic asymmetric cues. Incorporated on lab-on-a-chip devices, these microratchet-like structures can be used to self-propel fluids, transport particles, and direct cell motion in the absence of external power sources. In this Focus article we discuss recent advances in the use of ratchet-like geometries in microfluidics which could open new avenues in biomedicine for applications in diagnosis, cancer biology, and bioengineering.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Miniaturized soft bio-hybrid robotics: a step forward into healthcare applications

  • Patiño, Tania
  • Mestre, T.
  • Sánchez Ordóñez, Samuel
Soft robotics is an emerging discipline that employs soft flexible materials such as fluids, gels and elastomers in order to enhance the use of robotics in healthcare applications. Compared to their rigid counterparts, soft robotic systems have flexible and rheological properties that are closely related to biological systems, thus allowing the development of adaptive and flexible interactions with complex dynamic environments. With new technologies arising in bioengineering, the integration of living cells into soft robotic systems offers the possibility of accomplishing multiple complex functions such as sensing and actuating upon external stimuli. These emerging bio-hybrid systems are showing promising outcomes and opening up new avenues in the field of soft robotics for applications in healthcare and other fields
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Inkjet printed flexible non-enzymatic glucose sensor for tear fluid analysis

  • Romeo, Agostino
  • Moya, Ana
  • Leung, Tammy S.
  • Gabriel, Gemma
  • Villa, Rosa
  • Sanchez, Samuel
© 2017 Here, we present a flexible and low-cost inkjet printed electrochemical sensor for enzyme-free glucose analysis. Versatility, short fabrication time and low cost make inkjet printing a valuable alternative to traditional sensor manufacturing techniques. We fabricated electro-chemical glucose sensors by inkjet printing electrodes on a flexible polyethylene terephthalate substrate. CuO microparticles were used to modify our electrodes, leading to a sensitive, stable and cost-effective platform for non-enzymatic detection of glucose. Selectivity, reproducibility, and life-time provided by the CuO functionalization demonstrated that these sensors are reliable tools for personalized diagnostics and self-assessment of an individual's health. The detection of glucose at concentrations matching that of tear fluid allows us to envisage applications in ocular diagnostics, where painless and non-invasive monitoring of diabetes can be achieved by analyzing glucose contained in tears.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Microbots decorated with silver nanoparticles kill bacteria in aqueous media

  • Vilela, Diana
  • Stanton, Morgan M.
  • Parmar, Jemish
  • Sánchez Ordóñez, Samuel
Water contamination is one of the most persistent problems of public health. Resistance of some pathogens to conventional disinfectants can require the combination of multiple disinfectants or increased disinfectant doses, which may produce harmful byproducts. Here, we describe an efficient method for disinfecting Escherichia coli and removing the bacteria from contaminated water using water self-propelled Janus microbots decorated with silver nanoparticles (AgNPs). The structure of a spherical Janus microbot consists of a magnesium (Mg) microparticle as a template that also functions as propulsion source by producing hydrogen bubbles when in contact with water, an inner iron (Fe) magnetic layer for their remote guidance and collection, and an outer AgNP-coated gold (Au) layer for bacterial adhesion and improving bactericidal properties. The active motion of microbots increases the chances of the contact of AgNPs on the microbot surface with bacteria, which provokes the selective Ag+ release in their cytoplasm, and the microbot self-propulsion increases the diffusion of the released Ag+ ions. In addition, the AgNP-coated Au cap of the microbots has a dual capability of capturing bacteria and then killing them. Thus, we have demonstrated that AgNP-coated Janus microbots are capable of efficiently killing more than 80% of E. coli compared with colloidal AgNPs that killed only less than 35% of E. coli in contaminated water solutions in 15 min. After capture and extermination of bacteria, magnetic properties of the cap allow collection of microbots from water along with the captured dead bacteria, leaving water with no biological contaminants. The presented biocompatible Janus microbots offer an encouraging method for rapid disinfection of water.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Enzyme-powered nanobots enhance anticancer drug delivery

  • Hortelão, Ana C.
  • Patiño, Tania
  • Pérez Jiménez, Ariadna
  • Blanco, Ángel
  • Sánchez Ordóñez, Samuel
The use of enzyme catalysis to power micro- and nanomotors exploiting biocompatible fuels has opened new ventures for biomedical applications such as the active transport and delivery of specific drugs to the site of interest. Here, urease-powered nanomotors (nanobots) for doxorubicin (Dox) anticancer drug loading, release, and efficient delivery to cells are presented. These mesoporous silica-based core-shell nanobots are able to self-propel in ionic media, as confirmed by optical tracking and dynamic light scattering analysis. A four-fold increase in drug release is achieved by nanobots after 6 h compared to their passive counterparts. Furthermore, the use of Dox-loaded nanobots presents an enhanced anticancer efficiency toward HeLa cells, which arises from a synergistic effect of the enhanced drug release and the ammonia produced at high concentrations of urea substrate. A higher content of Dox inside HeLa cells is detected after 1, 4, 6, and 24 h incubation with active nanobots compared to passive Dox-loaded nanoparticles. The improvement in drug delivery efficiency achieved by enzyme-powered nanobots may hold potential toward their use in future biomedical applications such as the substrate-triggered release of drugs in target locations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of surfactants on the performance of tubular and spherical micromotors - a comparative study

  • Simmchen, Juliane
  • Magdanz, Veronika
  • Sánchez, Samuel
  • Chokmaviroj, Sarocha
  • Ruiz Molina, Daniel
  • Baeza, Alejandro
  • Schmidt, Oliver G.
This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence., The development of artificial micromotors is one of the greatest challenges of modern nanotechnology. Even though many kinds of motors have been published in recent times, systematic studies on the influence of components of the fuel solution are widely missing. Therefore, the autonomous movement of Pt-microtubes and Pt-covered silica particles is comparatively observed in the presence and absence of surfactants in the medium. One representative of each of the three main surfactant classes-anionic (sodium dodecyl sulfate, SDS), cationic (benzalkonium chloride, BACl) and non-ionic (Triton X)-has been chosen and studied., This research was partially supported by grant from Ministerio de Economía y Competitividad; MINECO (grant number MAT2012-38318-C03-02) and the ERC grant “Lab-in-a-tube and Nanorobotics biosensors” (grant number #311529)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Propulsion mechanism of catalytic microjet engines

  • Fomin, Vladimir M.
  • Hippler, Markus
  • Magdanz, Veronika
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We describe the propulsion mechanism of the catalytic microjet engines that are fabricated using rolled-up nanotech. Microjets have recently shown numerous potential applications in nanorobotics but currently there is a lack of an accurate theoretical model that describes the origin of the motion as well as the mechanism of self-propulsion. The geometric asymmetry of a tubular microjet leads to the development of a capillary force, which tends to propel a bubble toward the larger opening of the tube. Because of this motion in an asymmetric tube, there emerges a momentum transfer to the fluid. In order to compensate this momentum transfer, a jet force acting on the tube occurs. This force, which is counterbalanced by the linear drag force, enables tube velocities of the order of 100 µm/s. This mechanism provides a fundamental explanation for the development of driving forces that are acting on bubbles in tubular microjets.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Thermal activation of catalytic microjets in blood samples using microfluidic chips

  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Martinez Cisneros, Cynthia
  • Swiersy, Anka
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We demonstrate that catalytic microjet engines can out-swim high complex media composed of red blood cells and serum. Despite the challenge presented by the high viscosity of the solution at room temperature, the catalytic microjets can be activated at physiological temperature and, consequently, self-propel in diluted solutions of blood samples. We prove that these microjets self-propel in 10× diluted blood samples using microfluidic chips.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Catalytic nanomotors for environmental monitoring and water remediation

  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Sanchez, Samuel
Self-propelled nanomotors hold considerable promise for developing innovative environmental applications. This review highlights the recent progress in the use of self-propelled nanomotors for water remediation and environmental monitoring applications, as well as the effect of the environmental conditions on the dynamics of nanomotors. Artificial nanomotors can sense different analytes-and therefore pollutants, or
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Surface roughness-induced speed increase for active Janus micromotors

  • choudhury, Udit
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Gibbs, John G.
  • Sanchez, Samuel
  • Fischer, Peer
We demonstrate a simple physical fabrication method to control surface roughness of Janus micromotors and fabricate self-propelled active Janus microparticles with rough catalytic platinum surfaces that show a four-fold increase in their propulsion speed compared to conventional Janus particles coated with a smooth Pt layer.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Nano and micro architectures for self-propelled motors

  • Parmar, Jemish
  • Ma, Xing
  • Katuri, Jaideep
  • Simmchen, Juliane
  • Stanton, Morgan M.
  • Trichet-Paredes, Carolina
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Sanchez, Samuel
Self-propelled micromotors are emerging as important tools that help us understand the fundamentals of motion at the microscale and the nanoscale. Development of the motors for various biomedical and environmental applications is being pursued. Multiple fabrication methods can be used to construct the geometries of different sizes of motors. Here, we present an overview of appropriate methods of fabrication according to both size and shape requirements and the concept of guiding the catalytic motors within the confines of wall. Micromotors have also been incorporated with biological systems for a new type of fabrication method for bioinspired hybrid motors using three-dimensional (3D) printing technology. The 3D printed hybrid and bioinspired motors can be propelled by using ultrasound or live cells, offering a more biocompatible approach when compared to traditional catalytic motors.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Trapping self-propelled micromotors with microfabricated chevron and heart-shaped chips

  • Restrepo Perez, Laura
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Martinez Cisneros, Cynthia
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We demonstrate that catalytic micromotors can be trapped in microfluidic chips containing chevron and heart-shaped structures. Despite the challenge presented by the reduced size of the traps, microfluidic chips with different trapping geometries can be fabricated via replica moulding. We prove that these microfluidic chips can capture micromotors without the need for any external mechanism to control their motion.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Self-propelled micromotors for cleaning polluted water

  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Magdanz, Veronika
  • Fomin, Vladimir M.
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We describe the use of catalytically self-propelled microjets (dubbed micromotors) for degrading organic pollutants in water via the Fenton oxidation process. The tubular micromotors are composed of rolled-up functional nanomembranes consisting of Fe/Pt bilayers. The micromotors contain double functionality within their architecture, i.e., the inner Pt for the self-propulsion and the outer Fe for the in situ generation of ferrous ions boosting the remediation of contaminated water.The degradation of organic pollutants takes place in the presence of hydrogen peroxide, which acts as a reagent for the Fenton reaction and as main fuel to propel the micromotors. Factors influencing the efficiency of the Fenton oxidation process, including thickness of the Fe layer, pH, and concentration of hydrogen peroxide, are investigated. The ability of these catalytically self-propelled micromotors to improve intermixing in liquids results in the removal of organic pollutants ca. 12 times faster than when the Fenton oxidation process is carried out without catalytically active micromotors. The enhanced reaction–diffusion provided by micromotors has been theoretically modeled. The synergy between the internal and external functionalities of the micromotors, without the need of further functionalization, results into an enhanced degradation of nonbiodegradable and dangerous organic pollutants at small-scale environments and holds considerable promise for the remediation of contaminated water.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Photoactive rolled-up TiO2 microtubes: fabrication, characterization and applications

  • Giudicatti, Silvia
  • Marz, Sonja M.
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Madani, Abbas
  • Jorgensen, Matthew R.
  • Sanchez, Samuel
  • Schmidt, Oliver G.
Because of its unique properties, titania (TiO2) represents a promising candidate in a wide variety of research fields. In this paper, some of the properties and potential applications of titania within rolled-up nanotechnology are explored. It is shown how the structural and optical properties of rolled titania microtubes can be controlled by properly tuning the microfabrication parameters. The rolling up of titania films on different sacrificial layers and containing different shapes, achieving a control on the diameter of the fabricated titania microtubes, is presented. In order to obtain the more photoactive crystalline form of titania, one during-fabrication and two post-fabrication methods are demonstrated. Interesting applications in the fields of photocatalysis and photonics are suggested: the use of titania rolled-up microtubes as micromotors and optical microresonators is presented.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fuel-free nanocap-like motors actuated under visible light

  • Wang, Xu
  • Srdihar, Varum
  • Guo, Surong
  • Talebi, Nahid
  • Miguel López, Albert
  • Hahn, Kersten
  • van Aken, Peter A.
  • Sánchez Ordóñez, Samuel
The motion of nanomotors triggered by light sources will provide new alternative routes to power nanoarchitectures without the need of chemical fuels. However, most light-driven nanomotors are triggered by UV-light, near infrared reflection, or laser sources. It is demonstrated that nanocap shaped Au/TiO2 nanomotors (175 nm in diameter) display increased Brownian motion in the presence of broad spectrum visible light. The motion results from the surface plasmon resonance effect leading to self-electrophoresis between the Au and TiO2 layers, a mechanism called plasmonic photocatalytic effect in the field of photocatalysis. This mechanism is experimentally characterized by electron energy loss spectroscopy, energy-filtered transmission electron microscopy, and optical video tracking. This mechanism is also studied in a more theoretical manner using numerical finite-difference time-domain simulations. The ability to power nanomaterials with visible light may result in entirely new applications for externally powered micro/nanomotors.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-assembly of micromachining systems powered by Janus micromotors

  • Maggi, Claudio
  • Simmchen, Juliane
  • Saglimbeni, Filipo
  • Katuri, Jaideep
  • Dipalo, Michele
  • Angelis, Francesco De
  • Sánchez Ordóñez, Samuel
  • Leonardo, Roberto Di
Janus particles can self-assemble around microfabricated gears in reproducible configurations with a high degree of spatial and orientational order. The final configuration maximizes the torque applied on the rotor leading to a unidirectional and steady rotating motion. The interplay between geometry and dynamical behavior leads to the self-assembly of Janus micromotors starting from randomly distributed particles.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photoactive rolled-up TiO2 microtubes: fabrication, characterization and applications

  • Giudicatti, Silvia
  • Marz, Sonja M.
  • Soler Turu, Lluís
  • Madani, Abbas
  • Jorgensen, Matthew R.
  • Sanchez, Samuel
  • Schmidt, Oliver G.
Because of its unique properties, titania (TiO2) represents a promising candidate in a wide variety of research fields. In this paper, some of the properties and potential applications of titania within rolled-up nanotechnology are explored. It is shown how the structural and optical properties of rolled titania microtubes can be controlled by properly tuning the microfabrication parameters. The rolling up of titania films on different sacrificial layers and containing different shapes, achieving a control on the diameter of the fabricated titania microtubes, is presented. In order to obtain the more photoactive crystalline form of titania, one during-fabrication and two post-fabrication methods are demonstrated. Interesting applications in the fields of photocatalysis and photonics are suggested: the use of titania rolled-up microtubes as micromotors and optical microresonators is presented., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Motion in microfluidic ratchets

  • Caballero Vila, David
  • Katuri, Jaideep
  • Samitier i Martí, Josep
  • Sánchez Ordóñez, Samuel
The ubiquitous random motion of mesoscopic active particles, such as cells, can be "rectified" or directed by embedding the particles in systems containing local and periodic asymmetric cues. Incorporated on lab-on-a-chip devices, these microratchet-like structures can be used to self-propel fluids, transport particles, and direct cell motion in the absence of external power sources. In this Focus article we discuss recent advances in the use of ratchet-like geometries in microfluidics which could open new avenues in biomedicine for applications in diagnosis, cancer biology, and bioengineering.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Surface roughness-induced speed increase for active Janus micromotors

  • choudhury, Udit
  • Soler Turu, Lluís
  • Gibbs, John G.
  • Sanchez, Samuel
  • Fischer, Peer
We demonstrate a simple physical fabrication method to control surface roughness of Janus micromotors and fabricate self-propelled active Janus microparticles with rough catalytic platinum surfaces that show a four-fold increase in their propulsion speed compared to conventional Janus particles coated with a smooth Pt layer., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enzyme-powered nanobots enhance anticancer drug delivery

  • Hortelão, Ana C.
  • Patiño, Tania
  • Pérez Jiménez, Ariadna
  • Blanco, Ángel
  • Sánchez Ordóñez, Samuel
The use of enzyme catalysis to power micro- and nanomotors exploiting biocompatible fuels has opened new ventures for biomedical applications such as the active transport and delivery of specific drugs to the site of interest. Here, urease-powered nanomotors (nanobots) for doxorubicin (Dox) anticancer drug loading, release, and efficient delivery to cells are presented. These mesoporous silica-based core-shell nanobots are able to self-propel in ionic media, as confirmed by optical tracking and dynamic light scattering analysis. A four-fold increase in drug release is achieved by nanobots after 6 h compared to their passive counterparts. Furthermore, the use of Dox-loaded nanobots presents an enhanced anticancer efficiency toward HeLa cells, which arises from a synergistic effect of the enhanced drug release and the ammonia produced at high concentrations of urea substrate. A higher content of Dox inside HeLa cells is detected after 1, 4, 6, and 24 h incubation with active nanobots compared to passive Dox-loaded nanoparticles. The improvement in drug delivery efficiency achieved by enzyme-powered nanobots may hold potential toward their use in future biomedical applications such as the substrate-triggered release of drugs in target locations.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-propelled micromotors for cleaning polluted water

  • Soler Turu, Lluís
  • Magdanz, Veronika
  • Fomin, Vladimir M.
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We describe the use of catalytically self-propelled microjets (dubbed micromotors) for degrading organic pollutants in water via the Fenton oxidation process. The tubular micromotors are composed of rolled-up functional nanomembranes consisting of Fe/Pt bilayers. The micromotors contain double functionality within their architecture, i.e., the inner Pt for the self-propulsion and the outer Fe for the in situ generation of ferrous ions boosting the remediation of contaminated water.The degradation of organic pollutants takes place in the presence of hydrogen peroxide, which acts as a reagent for the Fenton reaction and as main fuel to propel the micromotors. Factors influencing the efficiency of the Fenton oxidation process, including thickness of the Fe layer, pH, and concentration of hydrogen peroxide, are investigated. The ability of these catalytically self-propelled micromotors to improve intermixing in liquids results in the removal of organic pollutants ca. 12 times faster than when the Fenton oxidation process is carried out without catalytically active micromotors. The enhanced reaction–diffusion provided by micromotors has been theoretically modeled. The synergy between the internal and external functionalities of the micromotors, without the need of further functionalization, results into an enhanced degradation of nonbiodegradable and dangerous organic pollutants at small-scale environments and holds considerable promise for the remediation of contaminated water., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Core-shell microspheres for the ultrafast degradation of estrogen hormone at neutral pH

  • Villa, Katherine
  • Parmar, Jemish
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
In the past few years there has been growing concern about human exposure to endocrine disrupting chemicals. This kind of pollutants can bioaccumulate in aquatic organisms and lead to serious health problems, especially affecting child development. Many efforts have been devoted to achieving the efficient removal of such refractory organics. In this regard, a novel catalyst based on the combination of α-FeOOH and MnO2@MnCO3 catalysts has been developed by up-scalable techniques from cheap precursors and tested in the photo-Fenton-like degradation of an endocrine disruptor. Almost total degradation of 17α-ethynylestradiol hormone was achieved after only 2 min of simulated solar irradiation at neutral pH. The outstanding performance of FeOOH@MnO2@MnCO3 microspheres was mainly attributed to a larger generation of hydroxyl radicals, which are the primary mediators of the total oxidation for this hormone. This work contributes to the development of more cost-effective systems for the rapid and efficient removal of persistent organic pollutants present in sewage plant effluents under direct solar light.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Nano and micro architectures for self-propelled motors

  • Parmar, Jemish
  • Ma, Xing
  • Katuri, Jaideep
  • Simmchen, Juliane
  • Stanton, Morgan M.
  • Trichet-Paredes, Carolina
  • Soler Turu, Lluís
  • Sanchez, Samuel
Self-propelled micromotors are emerging as important tools that help us understand the fundamentals of motion at the microscale and the nanoscale. Development of the motors for various biomedical and environmental applications is being pursued. Multiple fabrication methods can be used to construct the geometries of different sizes of motors. Here, we present an overview of appropriate methods of fabrication according to both size and shape requirements and the concept of guiding the catalytic motors within the confines of wall. Micromotors have also been incorporated with biological systems for a new type of fabrication method for bioinspired hybrid motors using three-dimensional (3D) printing technology. The 3D printed hybrid and bioinspired motors can be propelled by using ultrasound or live cells, offering a more biocompatible approach when compared to traditional catalytic motors., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Pushing bacterial biohybrids to in vivo applications

  • Stanton, Morgan M.
  • Sánchez Ordóñez, Samuel
Bacterial biohybrids use the energy of bacteria to manipulate synthetic materials with the goal of solving biomedical problems at the micro- and nanoscale. We explore current in vitro studies of bacterial biohybrids, the first attempts at in vivo biohybrid research, and problems to be addressed for the future.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Miniaturized soft bio-hybrid robotics: a step forward into healthcare applications

  • Patiño, Tania
  • Mestre, T.
  • Sánchez Ordóñez, Samuel
Soft robotics is an emerging discipline that employs soft flexible materials such as fluids, gels and elastomers in order to enhance the use of robotics in healthcare applications. Compared to their rigid counterparts, soft robotic systems have flexible and rheological properties that are closely related to biological systems, thus allowing the development of adaptive and flexible interactions with complex dynamic environments. With new technologies arising in bioengineering, the integration of living cells into soft robotic systems offers the possibility of accomplishing multiple complex functions such as sensing and actuating upon external stimuli. These emerging bio-hybrid systems are showing promising outcomes and opening up new avenues in the field of soft robotics for applications in healthcare and other fields
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Artificial micro-swimmers in simulated natural environments

  • Katuri, Jaideep
  • Seo, K. D.
  • Kim, D. S.
  • Sánchez Ordóñez, Samuel
Microswimmers, such as bacteria, are known to show different behaviours depending on their local environment. They identify spatial chemical gradients to find nutrient rich areas (chemotaxis) and interact with shear flows to accumulate in high shear regions. Recently, artificial microswimmers have been developed which mimic their natural counterparts in many ways. One of the exciting topics in this field is to study these artificial motors in several natural settings like the ones bacteria interact with. In this Focus article, we summarize recent observations of artificial swimmers in chemical gradients, shear flows and other interesting natural environments simulated in the lab using microfluidics and nanotechnology.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Catalytic nanomotors for environmental monitoring and water remediation

  • Soler Turu, Lluís
  • Sanchez, Samuel
Self-propelled nanomotors hold considerable promise for developing innovative environmental applications. This review highlights the recent progress in the use of self-propelled nanomotors for water remediation and environmental monitoring applications, as well as the effect of the environmental conditions on the dynamics of nanomotors. Artificial nanomotors can sense different analytes-and therefore pollutants, or, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Propulsion mechanism of catalytic microjet engines

  • Fomin, Vladimir M.
  • Hippler, Markus
  • Magdanz, Veronika
  • Soler Turu, Lluís
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We describe the propulsion mechanism of the catalytic microjet engines that are fabricated using rolled-up nanotech. Microjets have recently shown numerous potential applications in nanorobotics but currently there is a lack of an accurate theoretical model that describes the origin of the motion as well as the mechanism of self-propulsion. The geometric asymmetry of a tubular microjet leads to the development of a capillary force, which tends to propel a bubble toward the larger opening of the tube. Because of this motion in an asymmetric tube, there emerges a momentum transfer to the fluid. In order to compensate this momentum transfer, a jet force acting on the tube occurs. This force, which is counterbalanced by the linear drag force, enables tube velocities of the order of 100 µm/s. This mechanism provides a fundamental explanation for the development of driving forces that are acting on bubbles in tubular microjets., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Medical imaging for the tracking of micromotors

  • Vilela, Diana
  • Cossío, Unai
  • Parmar, Jemish
  • Martínez Villacorta, Angel M.
  • Gómez Vallejo, Vanessa
  • Llop, Jordi
  • Sánchez Ordóñez, Samuel
Micro/nanomotors are useful tools for several biomedical applications, including targeted drug delivery and minimally invasive microsurgeries. However, major challenges such as in vivo imaging need to be addressed before they can be safely applied on a living body. Here, we show that positron emission tomography (PET), a molecular imaging technique widely used in medical imaging, can also be used to track a large population of tubular Au/PEDOT/Pt micromotors. Chemisorption of an iodine isotope onto the micromotor’s Au surface rendered them detectable by PET, and we could track their movements in a tubular phantom over time frames of up to 15 min. In a second set of experiments, micromotors and the bubbles released during self-propulsion were optically tracked by video imaging and bright-field microscopy. The results from direct optical tracking agreed with those from PET tracking, demonstrating that PET is a suitable technique for the imaging of large populations of active micromotors in opaque environments, thus opening opportunities for the use of this mature imaging technology for the in vivo localization of artificial swimmers.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Smart biosensors for multiplexed and fully integrated point-of-care diagnostics

  • Romeo, Agostino
  • Leung, T. S.
  • Sánchez Ordóñez, Samuel
Point-of-care diagnostics (PoC) and personalised medicine are highly valuable for the improvement of world health. Smartphone PoC platforms which precisely diagnose diseases and track their development through the detection of several bioanalytes represent one of the newest and most exciting advancements towards mass-screening applications. Here we focus on recent advances in both multiplexed and smartphone integrated PoC sensors.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Magnetotactic bacteria powered biohybrids target E. coli biofilms

  • Stanton, Morgan M.
  • Park, Byung-Wook
  • Vilela, Diana
  • Bente, Klaas
  • Faivre, Damien
  • Sitti, Metin
  • Sánchez Ordóñez, Samuel
Biofilm colonies are typically resistant to general antibiotic treatment and require targeted methods for their removal. One of these methods include the use of nanoparticles as carriers for antibiotic delivery, where they randomly circulate in fluid until they make contact with the infected areas. However, the required proximity of the particles to the biofilm results in only moderate efficacy. We demonstrate here that the non-pathogenic magnetotactic bacteria, Magnetosopirrillum gryphiswalense (MSR-1), can be integrated with drug-loaded mesoporous silica microtubes (MSMs) to build controllable microswimmers (biohybrids) capable of antibiotic delivery to target an infectious biofilm. Applying external magnetic guidance capability and swimming power of the MSR-1 cells, the biohybrids are directed to and forcefully pushed into matured Escherichia coli (E. coli) biofilms. Release of the antibiotic, ciprofloxacin (CFX), is triggered by the acidic microenvironment of the biofilm ensuring an efficient drug delivery system. The results reveal the capabilities of a non-pathogenic bacteria species to target and dismantle harmful biofilms, indicating biohybrid systems have great potential for anti-biofilm applications.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Metal-oxide-based microjets for the simultaneous removal of organic pollutants and heavy metals

  • Villa, Katherine
  • Parmar, Jemish
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
Water contamination from industrial and anthropogenic activities is nowadays a major issue in many countries worldwide. To address this problem, efficient water treatment technologies are required. Recent efforts have focused on the development of self-propelled micromotors that provide enhanced micromixing and mass transfer by the transportation of reactive species, resulting in higher decontamination rates. However, a real application of these micromotors is still limited due to the high cost associated to their fabrication process. Here, we present Fe2O3-decorated SiO2/MnO2 microjets for the simultaneous removal of industrial organic pollutants and heavy metals present in wastewater. These microjets were synthesized by low-cost and scalable methods. They exhibit an average speed of 485 ± 32 μm s–1 (∼28 body length per s) at 7% H2O2, which is the highest reported for MnO2-based tubular micromotors. Furthermore, the photocatalytic and adsorbent properties of the microjets enable the efficient degradation of organic pollutants, such as tetracycline and rhodamine B under visible light irradiation, as well as the removal of heavy metal ions, such as Cd2+ and Pb2+.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Trapping self-propelled micromotors with microfabricated chevron and heart-shaped chips

  • Restrepo Perez, Laura
  • Soler Turu, Lluís
  • Martinez Cisneros, Cynthia
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We demonstrate that catalytic micromotors can be trapped in microfluidic chips containing chevron and heart-shaped structures. Despite the challenge presented by the reduced size of the traps, microfluidic chips with different trapping geometries can be fabricated via replica moulding. We prove that these microfluidic chips can capture micromotors without the need for any external mechanism to control their motion., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Biohybrid microtube swimmers driven by single captured bacteria

  • Stanton, Morgan M.
  • Park, Byung-Wook
  • Miguel López, Albert
  • Ma, Xing
  • Sitti, Metin
  • Sánchez Ordóñez, Samuel
Bacteria biohybrids employ the motility and power of swimming bacteria to carry and maneuver microscale particles. They have the potential to perform microdrug and cargo delivery in vivo, but have been limited by poor design, reduced swimming capabilities, and impeded functionality. To address these challenge, motile Escherichia coli are captured inside electropolymerized microtubes, exhibiting the first report of a bacteria microswimmer that does not utilize a spherical particle chassis. Single bacterium becomes partially trapped within the tube and becomes a bioengine to push the microtube though biological media. Microtubes are modified with "smart" material properties for motion control, including a bacteria-attractant polydopamine inner layer, addition of magnetic components for external guidance, and a biochemical kill trigger to cease bacterium swimming on demand. Swimming dynamics of the bacteria biohybrid are quantified by comparing "length of protrusion" of bacteria from the microtubes with respect to changes in angular autocorrelation and swimmer mean squared displacement. The multifunctional microtubular swimmers present a new generation of biocompatible micromotors toward future microbiorobots and minimally invasive medical applications.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reusable and long-lasting active microcleaners for heterogeneous water remediation

  • Parmar, Jemish
  • Vilela, Diana
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Esqué de los Ojos, Daniel
  • Sort, Jordi
  • Sánchez Ordóñez, Samuel
Self-powered micromachines are promising tools for future environmental remediation technology. Waste-water treatment and water reuse is an essential part of environmental sustainability. Herein, we present reusable Fe/Pt multi-functional active microcleaners that are capable of degrading organic pollutants (malachite green and 4-nitrophenol) by generated hydroxyl radicals via a Fenton-like reaction. Various different properties of microcleaners, such as the effect of their size, short-term storage, long-term storage, reusability, continuous swimming capability, surface composition, and mechanical properties, are studied. It is found that these microcleaners can continuously swim for more than 24 hours and can be stored more than 5 weeks during multiple cleaning cycles. The produced microcleaners can also be reused, which reduces the cost of the process. During the reuse cycles the outer iron surface of the Fe/Pt microcleaners generates the in-situ, heterogeneous Fenton catalyst and releases a low concentration of iron into the treated water, while the mechanical properties also appear to be improved due to both its surface composition and structural changes. The microcleaners are characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), nanoindentation, and finite-element modeling (FEM).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermal activation of catalytic microjets in blood samples using microfluidic chips

  • Soler Turu, Lluís
  • Martinez Cisneros, Cynthia
  • Swiersy, Anka
  • Sanchez, Samuel
  • Schmidt, Oliver G.
We demonstrate that catalytic microjet engines can out-swim high complex media composed of red blood cells and serum. Despite the challenge presented by the high viscosity of the solution at room temperature, the catalytic microjets can be activated at physiological temperature and, consequently, self-propel in diluted solutions of blood samples. We prove that these microjets self-propel in 10× diluted blood samples using microfluidic chips., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Flexible sensors for biomedical technology

  • Vilela, Diana
  • Romeo, Agostino
  • Sánchez Ordóñez, Samuel
Flexible sensing devices have gained a great deal of attention among the scientific community in recent years. The application of flexible sensors spans over several fields, including medicine, industrial automation, robotics, security, and human-machine interfacing. In particular, non-invasive health-monitoring devices are expected to play a key role in the improvement of patient life and in reducing costs associated with clinical and biomedical diagnostic procedures. Here, we focus on recent advances achieved in flexible devices applied on the human skin for biomedical and healthcare purposes.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Platinum-free cobalt ferrite based micromotors for antibiotic removal

  • Parmar, Jemish
  • Villa, Katherine
  • Vilela, Diana
  • Sánchez Ordóñez, Samuel
Self-propelled micromotors have previously shown to enhance pollutant removal compared to non-motile nano-micro particles. However, these systems are expensive, difficult to scale-up and require surfactant for efficient work. Efficient and inexpensive micromotors are desirable for their practical applications in water treatment technologies. We describe cobalt-ferrite based micromotors (CFO micromotors) fabricated by a facile and scalable synthesis, that produce hydroxyl radicals via Fenton-like reaction and take advantage of oxygen gas generated during this reaction for self-propulsion. Once the reaction is complete, the CFO micromotors can be easily separated and collected due to their magnetic nature. The CFO micromotors are demonstrated for highly efficient advanced oxidative removal of tetracycline antibiotic from the water. Furthermore, the effects of different concentrations of micromotors and hydrogen peroxide on the antibiotic degradation were studied, as well as the generation of the highly reactive hydroxyl radicals responsible for the oxidation reaction.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-propelling micro-nanorobots: challenges and future perspectives in nanomedicine

  • Ma, Xing
  • Sánchez Ordóñez, Samuel
Nanorobots are envisioned since decades to be the future of nanomedicine in the active transport of therapeutics to specific locations. Here we comment on the progress that has emerged over the last few years towards that dream, and the challenges that need to be overcome to make it real.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbots decorated with silver nanoparticles kill bacteria in aqueous media

  • Vilela, Diana
  • Stanton, Morgan M.
  • Parmar, Jemish
  • Sánchez Ordóñez, Samuel
Water contamination is one of the most persistent problems of public health. Resistance of some pathogens to conventional disinfectants can require the combination of multiple disinfectants or increased disinfectant doses, which may produce harmful byproducts. Here, we describe an efficient method for disinfecting Escherichia coli and removing the bacteria from contaminated water using water self-propelled Janus microbots decorated with silver nanoparticles (AgNPs). The structure of a spherical Janus microbot consists of a magnesium (Mg) microparticle as a template that also functions as propulsion source by producing hydrogen bubbles when in contact with water, an inner iron (Fe) magnetic layer for their remote guidance and collection, and an outer AgNP-coated gold (Au) layer for bacterial adhesion and improving bactericidal properties. The active motion of microbots increases the chances of the contact of AgNPs on the microbot surface with bacteria, which provokes the selective Ag+ release in their cytoplasm, and the microbot self-propulsion increases the diffusion of the released Ag+ ions. In addition, the AgNP-coated Au cap of the microbots has a dual capability of capturing bacteria and then killing them. Thus, we have demonstrated that AgNP-coated Janus microbots are capable of efficiently killing more than 80% of E. coli compared with colloidal AgNPs that killed only less than 35% of E. coli in contaminated water solutions in 15 min. After capture and extermination of bacteria, magnetic properties of the cap allow collection of microbots from water along with the captured dead bacteria, leaving water with no biological contaminants. The presented biocompatible Janus microbots offer an encouraging method for rapid disinfection of water.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Motion control of urea powered biocompatible hollow microcapsules

  • Ma, Xing
  • Wang, Xu
  • Hahn, Kersten
  • Sánchez Ordóñez, Samuel
The quest for biocompatible micro-swimmers powered by compatible fuel and with full motion control over their self-propulsion is a long-standing challenge in the field of active matter and microrobotics. Here, we present an active hybrid microcapsule motor based on Janus hollow mesoporous silica micro particles (JHP) powered by the bio-catalytic decomposition of urea at physiological concentrations. The directional self-propelled motion lasts longer than 10 minutes with an average velocity of up to 5 body lengths per second. Additionally, we control the velocity of the micro-motor by chemically inhibiting and reactivating the enzymatic activity of urease. The incorporation of magnetic material within the Janus structure provides remote magnetic control on the movement direction. Furthermore, the mesoporous/hollow structure can load both small molecules and larger particles up to hundreds of nano-meters, making the hybrid micro-motor an active and controllable drug delivery micro-system.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enzyme-powered hollow mesoporous Janus nanomotors

  • Ma, Xing
  • Jannasch, Anita
  • Albrecth, Urban-Raphael
  • Hahn, Kersten
  • Miguel López, Albert
  • Schäffer, Erik
  • Sánchez Ordóñez, Samuel
The development of synthetic nanomotors for technological applications in particular for life science and nanomedicine is a key focus of current basic research. However, it has been challenging to make active nanosystems based on biocompatible materials consuming nontoxic fuels for providing self-propulsion. Here, we fabricate self-propelled Janus nanomotors based on hollow mesoporous silica nanoparticles (HMSNPs), which are powered by biocatalytic reactions of three different enzymes: catalase, urease, and glucose oxidase (GOx). The active motion is characterized by a mean-square displacement (MSD) analysis of optical video recordings and confirmed by dynamic light scattering (DLS) measurements. We found that the apparent diffusion coefficient was enhanced by up to 83%. In addition, using optical tweezers, we directly measured a holding force of 64 ± 16 fN, which was necessary to counteract the effective self-propulsion force generated by a single nanomotor. The successful demonstration of biocompatible enzyme-powered active nanomotors using biologically benign fuels has a great potential for future biomedical applications.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Inkjet printed flexible non-enzymatic glucose sensor for tear fluid analysis

  • Romeo, Agostino
  • Moya, Ana
  • Leung, Tammy S.
  • Gabriel, Gemma
  • Villa, Rosa
  • Sanchez, Samuel
© 2017 Here, we present a flexible and low-cost inkjet printed electrochemical sensor for enzyme-free glucose analysis. Versatility, short fabrication time and low cost make inkjet printing a valuable alternative to traditional sensor manufacturing techniques. We fabricated electro-chemical glucose sensors by inkjet printing electrodes on a flexible polyethylene terephthalate substrate. CuO microparticles were used to modify our electrodes, leading to a sensitive, stable and cost-effective platform for non-enzymatic detection of glucose. Selectivity, reproducibility, and life-time provided by the CuO functionalization demonstrated that these sensors are reliable tools for personalized diagnostics and self-assessment of an individual's health. The detection of glucose at concentrations matching that of tear fluid allows us to envisage applications in ocular diagnostics, where painless and non-invasive monitoring of diabetes can be achieved by analyzing glucose contained in tears.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reusable and long-lasting active micro-cleaners for heterogeneous water remediation

  • Parmar, Jemish
  • Vilela, Diana
  • Pellicer, Eva|||0000-0002-8901-0998
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Sort, Jordi|||0000-0003-1213-3639
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
Self-powered micro-machines are promising tools for the future environmental remediation technology. Waste water treatment and water reuse is an essential part of environmental sustainability. Herein, we present reusable Fe/Pt multi-functional active micro-cleaners that are capable of degrading organic pollutants by generated hydroxyl radicals via Fenton-like reaction. Various different properties of micro-cleaners such as the effect of their size, short-term storage, long-term storage, reusability, continuous swimming capability, surface composition and mechanical properties are studied. We find that micro-cleaners can continuously swim for more than 24 hours and can be stored more than 5 weeks during multiple cleaning cycles. Micro-cleaners can also be reused, which reduces the cost of the process. Over the reuse cycles, the outer iron surface of the Fe/Pt micro-cleaners generates in-situ heterogeneous Fenton catalyst and releases a low concentration of iron into the treated water while the mechanical properties also appear to be improved due to both surface composition and structural changes. Results have been characterized by SEM, XPS, Nanoindentation and Finite Element Modeling (FEM).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of surfactants on the performance of tubular and spherical micromotors-a comparative study

  • Simmchen, Juliane|||0000-0001-9073-9770
  • Magdanz, Veronika
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
  • Chokmaviroj, Sarocha
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Baeza, Alejandro|||0000-0002-9042-8865
  • Schmidt, Oliver G.
The development of artificial micromotors is one of the greatest challenges of modern nanotechnology. Even though many kinds of motors have been published in recent times, systematic studies on the influence of components of the fuel solution are widely missing. Therefore, the autonomous movement of Pt-microtubes and Pt-covered silica particles is comparatively observed in the presence and absence of surfactants in the medium. One representative of each of the three main surfactant classes-anionic (sodium dodecyl sulfate, SDS), cationic (benzalkonium chloride, BACl) and non-ionic (Triton X)-has been chosen and studied.