Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of the Ink Formulation and Coating Speed on the Polymorphism and Morphology of a Solution‐Sheared Thin Film of a Blended Organic Semiconductor

  • Tamayo, Adrián
  • Riera Galindo, Sergi
  • Jones, Andrew O. F.
  • Resel, Roland
  • Mas Torrent, Marta
Despite the recent encouraging advances in achieving high‐performance organic field effect transistors employing meniscus‐guided processing techniques compatible with roll‐to‐roll manufacturing, there is still a very limited knowledge about how all the coating parameters influence the thin film electrical characteristics. Here, the polymorphism and morphology of thin films of the organic semiconductor dibenzo‐tetrathiafulvalene blended with polystyrene deposited by bar‐assisted meniscus shearing (BAMS) are investigated in‐depth by modifying the coating speed and ink formulation. It is found that all these parameters significantly affect the crystallization process and the resulting thin film characteristics. Remarkably, pure polymorphs with optimized field‐effect mobilities can be achieved only within a narrow range of conditions. The precise control of the film morphology and crystal structure is of paramount importance in order to move toward real applications achieving high device‐to‐device reproducibility., This work was funded by the European Research Council (ERC)StG 2012‐306826 e‐GAMES. The authors also thank the Spanish Ministry of Economy and Competitiveness with the project FANCY CTQ2016‐80030‐R and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496), the Generalitat de Catalunya (2017‐SGR‐918) and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER‐BBN). The authors thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 811284 (UHMob). The authors also thank the Elettra synchrotron for the allocation of beamtime on the XRD1 beamline and also thank Luisa Barba for experimental support. A.T. acknowledges a Fellowship from the Ministry and is enrolled in the PhD program of the Universitat Autònoma of Barcelona (UAB). The authors thank Dr. F. Leonardi for preparing the film for X‐ray characterization and Dr. Max Riera for developing a software for data analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing Long-Term Device Stability Using Thin Film Blends of Small Molecule Semiconductors and Insulating Polymers to Trap Surface-Induced Polymorphs

  • Salzillo, Tommaso
  • Campos García, Antonio
  • Babuji, Adara
  • Santiago, Raul
  • Bromley, Stefan T.
  • Ocal, Carmen
  • Barrena, Esther
  • Jouclas, Rémy
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Geerts, Yves Henry
  • Mas Torrent, Marta
The lack of long‐term stability in thin films of organic semiconductors can often be caused by the low structural stability of metastable phases that are frequently formed upon deposition on a substrate surface. Here, thin films of 2,7‐dioctyloxy[1]benzothieno[3,2‐b]benzothiophene (C8O‐BTBT‐OC8) and blends of this material with polystyrene by solution shearing are fabricated. Both types of films exhibit the metastable surface‐induced herringbone phase (SIP) in all the tested coating conditions. The blended films reveal a higher device performance with a field‐effect mobility close to 1 cm2 V−1 s−1, a threshold voltage close to 0 V, and an on/off current ratio above 107. In situ lattice phonon Raman microscopy is used to study the stability of the SIP polymorph. It is found that films based on only C8O‐BTBT‐OC8 slowly evolve to the Bulk cofacial phase, significantly impacting device electrical performance. In contrast, the blended films stabilize the SIP phase, leading to devices that maintain a high performance over 1.5 years. This work demonstrates that blending small‐molecule organic semiconductors with insulating binding polymers can trap metastable polymorphs, which can lead to devices with both improved performance and long‐term stability., T.S. and A.C. contributed equally to this work. This work was funded by the Spanish Ministry projects (FANCY CTQ2016‐80030‐R, GENESIS PID2019‐111682RB‐I00, PID2019‐110907GB‐I00, MICIUN/FEDER RTI2018‐095460‐B‐I00 and MAT2016‐77852‐C2‐1‐R (AEI/FEDER, UE)) the Generalitat de Catalunya (2017‐SGR13, 2017‐SGR‐918 and 2017‐SGR668) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and “María de Maeztu” program for Spanish Structures of Excellence (MDM‐2017‐0767). The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 811284 (UHMob). They also acknowledge access to supercomputer resources as provided through grants from the Red Española de Supercomputación. T.S. acknowledges the H2020‐MSCA‐COFUND‐2014 Programme (P‐SPHERE, Grant agreement 665919). A.B. thanks the Spanish Government financial support through BES‐2016‐077519 FPI fellowship. This work was carried out within the framework of the doctoral program (Ph.D.) of Material Science (Department of Physics and Chemistry) of the Universitat Autonoma de Barcelona (UAB). Y.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi‐Fast no T.0072.18, and 2D to 3D no. 30489208. Financial support from the French Community of Belgian (ARC no. 20061) is also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. The authors acknowledge Dr. Gemma Rius and CNM‐IMB for the access to the Raman facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mobility anisotropy in the herringbone structure of asymmetric Ph-BTBT-10 in solution sheared thin film transistors

  • Tamayo, Adrián
  • Höfer, Sebastian
  • Salzillo, Tommaso
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Resel, Roland
  • Mas Torrent, Marta
Thin films of the organic semiconductor Ph-BTBT-10 and blends of this material with polystyrene have been deposited by a solution shearing technique at low (1 mm s−1) and high (10 mm s−1) coating velocities and implemented in organic field-effect transistors. Combined X-ray diffraction and electrical characterisation studies prove that the films coated at low speed are significantly anisotropic. The highest mobility is found along the coating direction, which corresponds to the crystallographic a-axis. In contrast, at high coating speed the films are crystallographically less ordered but with better thin film homogeneity and exhibit isotropic electrical characteristics. Best mobilities are found in films prepared at high coating speeds with the blended semiconductor. This work demonstrates the interplay between the crystal packing and thin film morphology and uniformity and their impact on the device performance., The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob), the Spanish Ministry project GENESIS PID2019-111682RB-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), the Generalitat de Catalunya (2017-SGR-918) and the Austrian Science Fund (FWF): [P30222]. A. T. thanks his enrolment in the Materials Science PhD program of Universitat Autònoma de Barcelona and acknowledges FPU fellowship from the Spanish Ministry. We thank the synchrotron Elettra, Trieste for provision of synchrotron radiation and Luisa Barba for her support to use the beamline XRD1. G.S. acknowledges postdoctoral fellowship support from the Belgian National Fund for Scientific Research (FNRS). We acknowledge support of the publication fee from the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Charge transfer complexes of a benzothienobenzothiophene derivative and their implementation as active layer in solution-processed thin film organic field-effect transistors

  • Fijahi, Lamiaa
  • Salzillo, Tommaso
  • Tamayo, Adrián
  • Bardini, Marco
  • Ruzie, Christian
  • Quarti, Claudio
  • Beljonne, David
  • D'Agostino, Simone
  • Geerts, Yves Henry
  • Mas Torrent, Marta
Herein, we report on the synthesis and structural characterization of novel charge transfer (CT) complexes of the benzothienobenzothiophene derivative C8O-BTBT-OC8 with the series of FxTCNQ derivatives (x = 2, 4). The degree of charge transfer and HOMO–LUMO gap energies were evaluated by spectroscopic means and by DFT calculations. Thin films of the (C8O-BTBT-OC8)(F4TCNQ) complex were prepared by a simple solution shearing technique and by blending the active materials with polystyrene. X-Ray diffraction and IR/Raman spectroscopy techniques were instrumental for the structural identification of the films, which belonged to the same phase as the resolved single crystal. The films were implemented as an active layer in organic field-effect transistor (OFET) devices, which exhibited an n-type behavior in ambient conditions in agreement with the theoretical calculations., This work was funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 811284 (UHMob), the Spanish Ministry with the project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), the Generalitat de Catalunya (2017-SGR-918) and the Consortium des Equipements de Calcul Intensif (CECI), funded by the Fonds de la Recherche Scientifique de Belgique (F.R.S. – FNRS) under grant no. 2.5020.11. A. T. acknowledges his FPU fellowship. A. T and L. F. are enrolled in the UAB Materials Science PhD program. Y. G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects, Pi-Fast No. T.0072.18, and 2D to 3D No. 30489208. Financial supports from the French Community of Belgium (ARC No. 20061) is also acknowledged. DB is a FNRS research director, CQ is a FNRS research associate. S. D. acknowledges financial support from the University of Bologna (RFO-Scheme). TS thanks the European co-financing project FSE REACT EU – PON R&I 2014–2020., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High throughput processing of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) organic semiconductors

  • Fijahi, Lamiaa
  • Li, Jinghai
  • Tamayo, Adrián
  • Volpi, Martina
  • Schweicher, Guillaume
  • Geerts, Yves H.
  • Mas Torrent, Marta
The deposition of organic semiconductors (OSCs) using solution shearing deposition techniques is highly appealing for device implementation. However, when using high deposition speeds, it is necessary to use very concentrated OSC solutions. The OSCs based on the family of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) have been shown to be excellent OSCs due to their high mobility and stability. However, their limited solubility hinders the processing of these materials at high speed. Here, we report the conditions to process alkylated DNTT and the S-shaped π-core derivative S-DNTT by bar-assisted meniscus shearing (BAMS) at high speed (i.e., 10 mm s-1). In all the cases, homogeneous thin films were successfully prepared, although we found that the gain in solubility achieved with the S-DNTT derivative strongly facilitated solution processing, achieving a field-effect mobility of 2.1 cm2 V-1 s-1, which is two orders of magnitude higher than the mobility found for the less soluble linear derivatives., This work was funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob), the Spanish Ministry (project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)) and the Generalitat de Catalunya (2017-SGR-918). L. F. and J. L. are enrolled in the UAB Materials Science PhD program. J. L. acknowledges the Scholarship from the Chinese Council. G. S. is a FNRS research associate (Belgian National Fund for Scientific Research). G. S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant). Y. H. G. is thankful to FNRS for financial support through research projects Pi-Fast (No T.0072.18), Pi-Chir (No T.0094.22), and DIFFRA (No U.G001.19)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic Effect of Solvent Vapor Annealing and Chemical Doping for Achieving High-Performance Organic Field-Effect Transistors with Ideal Electrical Characteristics

  • Li, Jinghai
  • Babuji, Adara
  • Fijahi, Lamiaa
  • James, Ann Maria
  • Resel, Roland
  • Salzillo, Tommaso
  • Pfattner, Raphael
  • Ocal, Carmen
  • Barrena, Esther
  • Mas Torrent, Marta
Contact resistance and charge trapping are two key obstacles, often intertwined, that negatively impact on the performance of organic field-effect transistors (OFETs) by reducing the overall device mobility and provoking a nonideal behavior. Here, we expose organic semiconductor (OSC) thin films based on blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8) with polystyrene (PS) to (i) a CH3CN vapor annealing process, (ii) a doping I2/water procedure, and (iii) vapors of I2/CH3CN to simultaneously dope and anneal the films. After careful analysis of the OFET electrical characteristics and by performing local Kelvin probe force microscopy studies, we found that the vapor annealing process predominantly reduces interfacial shallow traps, while the chemical doping of the OSC film is responsible for the diminishment of deeper traps and promoting a significant reduction of the contact resistance. Remarkably, the devices treated with I2/CH3CN reveal ideal electrical characteristics with a low level of shallow/deep traps and a very high and almost gate-independent mobility. Hence, this work demonstrates the promising synergistic effects of performing simultaneously a solvent vapor annealing and doping procedure, which can lead to trap-free OSC films with negligible contact resistance problems., This work was funded by the projects GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00 and FUNFUTURE CEX2019-000917-S from MCIN/AEI/10.13039/501100011033/, by the Generalitat de Catalunya (2017-SGR-918) and by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska–Curie grant agreement no. 811284 (UHMob). J.L. acknowledges funding from the Chinese Scholarship Council (CSC) and J.L., A.B., and L.F. are enrolled in the UAB Materials Science PhD program. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors acknowledge Dr. Francesco D’Amico and the CERIC-ERIC Consortium for the access to experimental facilities and financial support (proposal number 20217080). T.S. thanks the European co-financing project FSE REACT EU-PON R&I 2014-2020. R.P. acknowledges support from the Ramón y Cajal Fellowship (ref RyC2019-028474-I)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From synthesis to device fabrication: elucidating the structural and electronic properties of C7-BTBT-C7

  • Pandey, Priya
  • Fijahi, Lamiaa
  • McIntosh, Nemo
  • Turetta, Nicholas
  • Bardini, Marco
  • Giannini, Samuele
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Beljonne, David
  • Cornil, Jérôme
  • Samorì, Paolo
  • Mas Torrent, Marta
  • Geerts, Yves Henri
  • Modena, Enrico
  • Maini, Lucia
We report the polymorph investigation, crystallographic study and fabrication of organic field-effect transistors (OFETs) in solution-processed thin films of a prototypical organic semiconductor, i.e., 2,7-diheptylbenzo[b]benzo[4,5]thieno[2,3-d]thiophene (C7-BTBT-C7). We found that this molecule self-assembles solely into one type of stable crystal form, regardless of the experimental conditions employed when using conventional and non-conventional methods of crystallization. The integration of blends of C7-BTBT-C7 with polystyrene as active materials in OFETs fabricated using a solution shearing technique led to a field-effect mobility of 1.42 ± 0.45 cm2 V−1 s−1 in the saturation regime when a coating speed of 10 mm s−1 was employed. The intrinsic structural properties control the overlap of the frontier orbitals, thereby affecting the device performance. The interplay between the crystal packing, thin film morphology and uniformity and its impact on the device performance are reported., We acknowledge the Paul Scherrer Institut, Villigen, Switzerland, for the provision of synchrotron radiation beam time at the beamline MS-X04SA of the SLS (ID proposal 20201790). P. P., L. F., N. M., N. T., J. C., P. S., M. M. T., Y. G., E. M., and L. M., contributors of the paper, are the members of the UHMob project. This work has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant no. 811284. G. S. is a FNRS Research Associate (Belgian National Fund for Scientific Research). G. S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant). G. S. thanks the FNRS for financial support through the research project COHERENCE2 (no. F.4536.23). M. M. T. and L. F. also acknowledge MCIN through the project GENESIS PID2019 and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the Generalitat de Catalunya (2017-SGR-918)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of mechanical stress on flexible electrolyte-gated organic field-effect transistors

  • Ruiz Molina, Sara
  • Ricci, Simona
  • Martínez Domingo, Carme
  • Ortiz Aguayo, María Jesús
  • Pfattner, Raphael
  • Schweicher, Guillaume
  • Geerts, Yves H.
  • Salzillo, Tommaso
  • Mas Torrent, Marta
Electrolyte-gated organic field-effect transistors (EGOFETs) are attracting great attention for the development of low-cost and flexible sensors. However, in order to progress towards such applications, it is key to understand the stability of these devices in aqueous media and under mechanical deformation. Here, we have fabricated flexible EGOFETs based on two small molecule organic semiconductors blended with polystyrene. These materials have been printed employing a low-cost solution-based technique, obtaining large area crystalline films. The devices revealed a good EGOFET performance in terms of mobility. Finally, the devices were operated under tensile and compressive strain, observing a current increase (decrease) when a compressive (tensile) deformation was applied, revealing large gauge factors. Thus, this work shows the importance of assessing the device response under mechanical deformation when flexible EGOFET-based sensors are developed, in order to achieve a reliable response., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). This work was also funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob). S. R.-M. is enrolled in the UAB Chemistry PhD program. C. M. acknowledges her Juan de la Cierva fellowship. T. S. thanks the Programma per Giovani Ricercatori “Rita Levi Montalcini” year 2020 (grant PGR20QN52R) of the Italian Ministry of University and Research (MUR) for the financial support. Project funded under the National Recovery and Resilience Plan (NRRP), Mission 04 Component 2 Investment 1.5—NextGenerationEU, call for tender no. 3277 dated 30/12/2021 (award number: 0001052 dated 23/06/2022). Y. G. thanks the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects: PDR T.0058.14, Pi-Fast PDR T.0072.18, PICHIR PDR T.0094.22, DIFFRA GEQ U.G001.19, POLYP EQP U.N032.21F, POLYP2 EQP U.N03323F, CHIRI CDR J. 0088.24. G. S. thanks the FNRS for financial support through research project COHERENCE2 No F.4536.23. G. S. is a FNRS Research Associate. G. S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant) and Wiener-Anspach Foundation (FWA, ZT1 research project)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gate-Dielectric Surface Engineering With Fluorinated Monolayers: Minimizing Contact Resistance and Nonidealities in OFETs

  • Mesforush, Shaghayegh
  • Cazorla, Alba
  • Melville, Hayley
  • Blanchard, Philippe
  • Klauk, Hagen
  • Zschieschang, Ute
  • Zhang, Min
  • Fijahi, Lamiaa
  • Mas Torrent, Marta
  • Barrena, Esther
Organic field-effect transistors (OFETs) hold great potential for flexible, large-area electronics, but face challenges related to hysteresis in the transfer characteristics, contact resistance, and charge trapping. This study examines the growth and electrical properties of 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) organic-semiconductor films on Al 2 O 3 as gate dielectric, focusing on the effects of surface functionalization with a self-assembled monolayer (SAM) of either a non-fluorinated or a more or less strongly fluorinated phosphonic acid. This functionalization of the gate dielectric surface is found not to significantly affect the structural organization of Ph-BTBT-10 thin films grown at room temperature. Thin films grown at room temperature exhibit a single-layer lamella with a step height of 26.7 & Aring;, although there is evidence of a bilayer arrangement at the semiconductor-dielectric interface. Remarkably, the use of Al 2 O 3 functionalized with a fluorinated SAM leads to significant improvements in OFET performance, including near-zero threshold voltages, reduced hysteresis, reduced contact resistance, and more ideal electrical characteristics compared to bare Al 2 O 3. This work highlights the significant yet non-trivial benefits of gate-dielectric surface functionalization in reducing contact resistance and mitigating non-ideal behaviors in OFETs, offering an alternative to traditional approaches like contact doping or functionalization of the source/drain contacts in bottom-contact organic thin-film transistors (TFTs)., This work was funded by the Spanish Ministry of Science and Innovation (MCIN) and State Investigation Agency (AEI) under project PID2022-136802NB-I00 and RED2022-134503-T funded by MICIU/AEI/10.13039/ 501100011033 and FEDER, UE, and through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). This study is part of the Advanced Materials programme (In-CAEM project) and was partially supported by the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. This work was carried out within the framework of the doctoral PhD program of Material Science, Department of Physics of the Universitat Autonoma de Barcelona (UAB). M.M. thanks financial funding by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and by the Generalitat de Catalunya (2021-SGR-00443). M.Z. acknowledges her CSC fellowship. The authors also thank European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase Transformations in Evaporated Ph-BTBT-10 Thin Films and Impact on the Device Performance

  • Fijahi, Lamiaa
  • Yan, Shunya
  • James, Ann Maria
  • Zhang, Min
  • Cazorla, Alba
  • Tamayo, Adrián
  • Li, Jinghai
  • Ocal, Carmen
  • Barrena, Esther
  • Resel, Roland
  • Mas Torrent, Marta
This paper reports on the phase transformation occurring in evaporated thin films of the organic semiconductor 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10), along with its impact on the performance of organic thin-film field-effect transistors (OFETs). Temperature-dependent X-ray reflectivity (XRR) studies reveal that the films crystallize in a single-layer structure, which converts to a bilayer phase in the temperature range of 110°C –140°C; at further elevated temperatures, a liquid-crystal phase is formed. The conversion of the as-evaporated films to the bilayer structure is investigated by atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM) at specific annealing temperatures. The combination of XRR, AFM, and KPFM points out that only at the higher annealing temperature the phase transformation is completed. In a subsequent stage, the films are investigated as active layers in OFETs. An enhanced performance is observed in the annealed films with a higher mobility and reduced level of charge traps. The best electrical characteristics are realized when the bilayer transformation is fully accomplished., This work was funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob) and by MCIN/AEI/10.13039/501100011033/ERDF, UE with projects SENSATION PID2022-141393OB-I00, RED2022-134503-T, and PDC2022-133750-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S). The authors also thank Generalitat de Catalunya (2021-SGR-00443). This study is part of the Advanced Materials programme (In-CAEM project) and is partially supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). M.Z. and S.Y. are financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. This work has been carried out within the framework of the doctoral PhD program of Material Science of the Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed