Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chiral and Racemic Spin Crossover Polymorphs in a Family of Mononuclear Iron(II) Compounds

  • Bartual-Murgui, Carlos
  • Piñeiro-López, Lucía
  • Valverde-Muñoz, Francisco Javier
  • Seredyuk, Maksym
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Understanding the origin of cooperativity and the equilibrium temperature of transition (T1/2) displayed by the spin-crossover (SCO) compounds as well as controlling these parameters are of paramount importance for future applications. For this task, the occurrence of polymorphism, presented by a number of SCO complexes, may provide deep insight into the influence of the supramolecular organization on the SCO behavior. In this context, herein we present a novel family of mononuclear octahedral FeII complexes with formula cis- [Fe(bqen)(NCX)2], where bqen is the chelating tetradentate ligand N,N¿-bis(8-quinolyl)ethane-1,2-diamine and X = S, Se. Depending on the preparation method, these compounds crystallize in either the orthorhombic or the trigonal symmetry systems. While the orthorhombic phase is composed of a racemic mixture of mononuclear complexes (polymorph I), the trigonal phase contains only one of the two possible enantiomers (¿ or ¿), thereby generating a chiral crystal (polymorph II). The four derivatives undergo SCO behavior with well-differentiated T1/2 values occurring in the interval 90¿233 K. On one hand, T1/2 is about 110 K (polymorph I) and 87 K (polymorph II) higher for the selenocyanate derivatives in comparison to those for their thiocyanate counterparts. These differences in T1/2 are ascribed not only to the higher ligand field induced by the selenocyanate anion but also to a remarkable difference in the structural reorganization of the [FeN6] coordination core upon SCO. Likewise, the higher cooperativity observed for the thiocyanate derivatives seems to be related to their stronger intermolecular interactions within the crystal. On the other hand, T1/2 is about 53 K (thiocyanate) and 29 K (selenocyanate) higher for the trigonal polymorph II in comparison to those for the orthorhombic polymorph I. These differences, and the small changes observed in cooperativity, stem from the slightly different hetero- and homochiral crystal packing generated by the cis-[Fe(bqen)(NCX)2] molecules, which determines subtle adaptations in the intermolecular contacts and the FeII coordination core., We thank the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds (CTQ2013-46275-P and CTQ2016-78341-P and Unidad de Excelencia Maria de Maeztu MDM-2015-0538), Generalitat Valenciana (PROM-ETEO/2016/147), and EU Framework Program for Research and Innovation (RISE project number 734322). FJ.V.-M. thanks MINECO for a predoctoral FPI grant
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermochromic Meltable Materials with Reverse Spin Transition Controlled by Chemical Design

  • Valverde-Muñoz, Francisco Javier
  • Seredyuk, Maksym
  • Molnár, Gábor
  • Bibik, Yurii S.
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] We report a series of meltable Fe(II)complexes, which, depending on the length of aliphatic chains, display abrupt forward low-spin to high-spin transition or unprecedented melting-triggered reverse high-spin to low-spin transition on temperature rise. The reverse spin transition is perfectly reproducible on thermal cycling and the obtained materials are easily processable in the form of thin film owing to their soft-matter nature. We found that the discovered approach represents a potentially generalizable new avenue to control both the location in temperature and the direction of the spin transition in meltable compounds., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO)/ Ministerio de Ciencia e Innovacion FEDER (CTQ2016-78341-P/ PID2019-106147GB-I00), Unidad de Excelencia Maria de Maeztu (CEX2019-000919-M), and the Generalitat Valenciana through PROMETEO/2016/147 and an EU Framework Program for Research and Innovation (RISE project "SPINSWITCH" number 734322). F.J.V.M. thanks MINECO for a predoctoral (FPI) grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Discrimination between two memory channels by molecular alloying in a doubly bistable spin crossover material

  • Valverde-Muñoz, F. J.
  • Seredyuk, M.
  • Meneses-Sánchez, M.
  • Bartual-Murgui, C.
  • Real, J. A.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A multistable spin crossover (SCO) molecular alloy system [Fe1-xMx(nBu-im)(3)(tren)](P1-yAsyF6)(2) (M = Zn-II, Ni-II; (nBu-im)(3)(tren) = tris(n-butyl-imidazol(2-ethylamino))amine) has been synthesized and characterized. By controlling the composition of this isomorphous series, two cooperative thermally induced SCO events featuring distinct critical temperatures (T-c) and hysteresis widths (Delta T-c, memory) can be selected at will. The pristine derivative 100As (x = 0, y = 1) displays a strong cooperative two-step SCO and two reversible structural phase transitions (PTs). The low temperature PTLT and the SCO occur synchronously involving conformational changes of the ligand's n-butyl arms and two different arrangements of the AsF6- anions [T-c(1) = 174 K (Delta T-c(1) = 17 K), T-c(2) = 191 K (Delta T-c(2) = 23 K) (scan rate 2 K min(-1))]. The high-temperature PTHT takes place in the high-spin state domain and essentially involves rearrangement of the AsF6- anions [T-c(PT) = 275 K (Delta T-c(PT) = 16 K)]. This behavior strongly contrasts with that of the homologous 100P [x = 0, y = 0] derivative where two separate cooperative one-step SCO can be selected by controlling the kinetics of the coupled PTLT at ambient pressure: (i) one at low temperatures, T-c = 122 K (Delta T-c = 9 K), for temperature scan rates (>1 K min(-1)) (memory channel A) where the structural modifications associated with PTLS are inhibited; (ii) the other centered at T-c = 155 K (Delta T-c = 41 K) for slower temperature scan rates <= 0.1 K min(-1) (memory channel B). These two SCO regimes of the 100P derivative transform reversibly into the two-step SCO of 100As upon application of hydrostatic pressure (ca. 0.1 GPa) denoting the subtle effect of internal chemical pressure on the SCO behavior. Precise control of AsF6- <-> PF6- substitution, and hence of the PTLT kinetics, selectively selects the memory channel B of 100P when x = 0 and y approximate to 0.7. Meanwhile, substitution of Fe-II with Zn-II or Ni-II [x approximate to 0.2, y = 0] favors the low temperature memory channel A at any scan rate. This intriguing interplay between PT, SCO and isomorphous substitution was monitored by single crystal and powder X-ray diffractometries, and magnetic and calorimetric measurements., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO), FEDER (CTQ2016-78341-P), Unidad de Excelencia Maria de Maeztu (MDM-2015-0538), and the Generalitat Valenciana through PROMETEO/2016/147 and an EU Framework Program for Research and Innovation (RISE project number 734322). F. J. V. M. and M. M. S. thank MINECO for a predoctoral (FPI) grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Guest induced reversible on¿off switching of elastic frustration in a 3D spin crossover coordination polymer with room temperature hysteretic behaviour

  • Piñeiro-López, Lucía
  • Valverde-Muñoz, Francisco Javier
  • Trzop, Elzbieta
  • Seredyuk, Maksym
  • Castells-Gil, Javier
  • da Silva, Iván
  • Marti-Gastaldo, Carlos
  • Collet, Eric
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A binary reversible switch between low-temperature multi-step spin crossover (SCO), through the evolution of the population gamma(HS)(T) with high-spin (HS)-low-spin (LS) sequence: HS1LS0 (state 1) <-> HS2/3LS1/3 (state 2) <-> HS1/2LS1/2 (state 3) <-> HS1/3LS2/3 (state 4) <-> HS0LS1 (state 5), and complete one step hysteretic spin transition featuring 20 K wide thermal hysteresis centred at 290 K occurs in the three-dimensional (3D) Hofmann-type porous coordination polymer {Fe-II(3,8phen)[Au(CN)(2)](2)}center dot xPhNO(2) (3,8phen = 3,8-phenanthroline, PhNO2 = nitrobenzene), made up of two identical interpenetrated pcu-type frameworks. The included PhNO2 guest (x = 1, 1 center dot PhNO2) acts as a molecular wedge between the interpenetrated 3D frameworks via PhNO2-3,8phen intermolecular recognition and is the source of the strong elastic frustration responsible for the multi-step regime. Detailed X-ray single crystal analysis reflects competition between spatial periodicities of structurally inequivalent HS and LS SCO centres featuring: (i) symmetry breaking (state 3) with MIDLINE HORIZONTAL ELLIPSISHS-LSMIDLINE HORIZONTAL ELLIPSIS ordering with gamma(HS) = 1/2; and (ii) occurrence of spatial modulation of the structure providing evidence for stabilization of local or aperiodic ordered mixed spin states for states 2 and 4 (with gamma(HS) approximate to 2/3) and 4 (with gamma(HS) approximate to 1/3), respectively. Below c.a. 20 K, structural and magnetic analyses show the photogeneration of a metastable HS*, state 6. The room-temperature single-step hysteretic regime appears with release of the guest (x = 0, 1) and the elastic frustration, and reversibly switches back to the original four-step behaviour upon guest re-adsorption. Both uncommon relevant SCO events meeting in the same material represent a rare opportunity to compare them in the frame of antiferro- and ferro-elastic transitions., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO)/Ministerio de Ciencia e Innovacion FEDER (CTQ2016-78341-P/PID2019-106147GB-I00), Unidad de Excelencia Maria de Maeztu (CEX2019-000919-M), the Generalitat Valenciana through PROMETEO/2016/147 and an EU Framework Programme for Research and Innovation (RISE project number 734322). F. J. V. M. thanks MINECO for a predoctoral (FPI) grant. C. M. G. thanks the funding from the European Research Council (grant agreement No. 714122).
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí Bedmar, Guillem
  • Aguilà Avilés, David
  • Pané, Salvador
  • deMelloa, Andrew J.
  • Rotarug, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well- controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this syn- thetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Account- ing for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí, Guillem
  • Aguilà, David
  • Pané, Salvador
  • deMello, Andrew J.
  • Rotaru, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system., This work was partially supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Projects no. 200021_160174 and 200021 181988), MAT 2015–70615-R and MINECOCTQ2017-88948-P and RTI2018-098027-B-C21 from the Spanish Government funds, and by the European Regional Development Fund (ERDF). J.P.L. and S.P. acknowledge networking support by the COST Action CM1407 “e-minds”. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). S.S-G. acknowledges the support from MINECO BES-2015-071492 grant. A.R. acknowledges the European Commission through the SPINSWITCH project (H2020-MSCA-RISE-2016, Grant Agreement No. 734322). Additionally, all authors acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQACCSIC. G.A. thanks support by the Generalitat de Catalunya through the ICREA Academia Prize 2018 Authors A. Abrishamkar, S. Suárez–García and S. Sevim contributed equally to this work., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí Bedmar, Guillem
  • Aguilà Avilés, David
  • Pané, Salvador
  • deMelloa, Andrew J.
  • Rotarug, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well- controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this syn- thetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Account- ing for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering, a case study with a functional coordination polymer

  • Abrishamkar, Afshin|||0000-0001-5957-8067
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons, Ramon|||0000-0003-4273-9084
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromi, Guillem|||0000-0002-0997-9484
  • Aguilà, David|||0000-0001-8707-7833
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • deMello, Andrew J.
  • Rotaru, Aurelian|||0000-0002-8782-7988
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.