Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Enhanced Organic Electrochemical Transistor Performance of Donor–Acceptor Conjugated Polymers Modified with Hybrid Glycol/Ionic Side Chains by Postpolymerization Modification

  • Ding, Bowen
  • Jo, Il-Young
  • Yu, Hang
  • Kim, Ji Hwan
  • Marsh, Adam V.
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Rapley, Charlotte L.
  • Rimmele, Martina
  • He, Qiao
  • Martín, Jaime
  • Gasparini, Nicola
  • Nelson, Jenny
  • Yoon, Myung-Han
  • Heeney, Martin
[Abstract] Emergent bioelectronic technologies are underpinned by the organic electrochemical transistor (OECT), which employs an electrolyte medium to modulate the conductivity of its organic semiconductor channel. Here we utilize postpolymerization modification (PPM) on a conjugated polymer backbone to directly introduce glycolated or anionic side chains via fluoride displacement. The resulting polymers demonstrated increased volumetric capacitances, with subdued swelling, compared to their parent polymer in p-type enhancement mode OECTs. This increase in capacitance was attributed to their modified side chain configurations enabling cationic charge compensation for thin film electrochemical oxidation, as deduced from electrochemical quartz crystal microbalance measurements. An overall improvement in OECT performance was recorded for the hybrid glycol/ionic polymer compared to the parent, owing to its low swelling and bimodal crystalline orientation as imaged by grazing-incidence wide-angle X-ray scattering, enabling its high charge mobility at 1.02 cm2·V–1·s–1. Compromised device performance was recorded for the fully glycolated derivative compared to the parent, which was linked to its limited face-on stacking, which hindered OECT charge mobility at 0.26 cm2·V–1·s–1, despite its high capacitance. These results highlight the effectiveness of anionic side chain attachment by PPM as a means of increasing the volumetric capacitance of p-type conjugated polymers for OECTs, while retaining solid-state macromolecular properties that facilitate hole transport., Reino Unido. Engineering and Physical Sciences Research Council; EP/T028513/1, República de Corea. Global Research Laboratory program; NRF-2017K1A1A2013153, República de Corea. National Research Foundation of Korea; RF-2021R1A2C101301511 569, República de Corea. National Research Foundation of Korea; 2021R1A2C1013015, República de Corea. National Research Foundation of Korea; 2018M3A7B4070988, República de Corea. National Research Foundation of Korea; 2021R1A4A1022920
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Discerning Blend Microstructure and Charge Recombination for Stable Biorenewable-Based Organic Photovoltaics

  • Mazzolini, Eva
  • Sanviti, Matteo
  • Martín, Jaime
  • Panidi, Julianna
[Abstract]: The power conversion efficiency of organic photovoltaics (OPV) has recently surpassed 20%. However, the degradation mechanisms affecting blends based on these materials require urgent attention to improve the stability of such devices towards the long timescales necessary for commercialization. In this work, we evaluated the degradation of OPVs based on sustainable and scalable donors poly[(thiophene)-alt-(6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline)] (PTQ10) and poly[(5-fluoro-6-((2-hexyldecyl)oxy)benzo[c][1,2,5]thiadiazole)-alt-thiophene] (FO6-T) blended with Y-family NFAs with different side-chain lengths processed from biorenewable 2MeTHF for PTQ10:Y12 and FO6-T:Y12 and from chloroform for FO6-T:Y6 blends. Superior stability is observed for FO6-T:Y12 with an extrapolated T80 of over 2000 h under LED illumination, and a more stable trend under metal halide lamps illumination compared to the other blends. By analyzing the thin film microstructure using Atomic Force Microscope (AFM), a significant phase separation is observed in the Y6-based blend, compared to PTQ10:Y12 and FO6-T:Y12, and a clear red-shift in the UV–vis profile. The superior stability of the FO6-T:Y12 blend is attributed to less morphological degradation upon aging and the increased number of photogenerated charges upon degradation. Finally, through a series of light intensity and temperature-dependent J–V characterizations, we evaluated the recombination mechanisms., E.M., Z.Q., and J.M. contributed equally to this work. J.P. acknowledges financial support from the Engineering Physical Science Research Council (EPSRC; EP/V057839/1 and EP/X52556X/1). F.E. and J.N. thank the European Research Council for support under the European Union’s Horizon 2020 research and innovation program (Grant No. 742708). J.N. thanks the Royal Society for the award of a Research Professorship. J.S.M. and J.N. thank the UK Engineering and Physical Sciences Research Council for funding via the ATIP program grant (EP/T028513/1). C.D. thanks the Deutsche Forschungsgemeinschaft for support (DFG Research Unit FOR 5387 POPULAR, Project No. 461909888). J.M thanks MICINN for the grant Ref. PID2021-126243NB-I00. The EPR measurements were performed at the Centre for Pulse EPR at Imperial College London (PEPR), supported by the EPSRC grant EP/T031425/1., Reino Unido. Engineering Physical Science Research Council; EP/V057839/1, Reino Unido. Engineering Physical Science Research Council; EP/X52556X/1, Reino Unido. Engineering Physical Science Research Council; EP/T028513/1, Alemania. Deutsche Forschungsgemeinschaft; 461909888, Reino Unido. Engineering Physical Science Research Council; EP/T031425/1
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relating Chain Conformation to the Density of States and Charge Transport in Conjugated Polymers: The Role of the β-phase in Poly(9,9-dioctylfluorene)

  • Shi, Xingyuan
  • Nádaždy, Vojtech
  • Perevedentsev, Aleksandr
  • Frost, Jarvist M.
  • Wang, Xuhua
  • Hauff, Elizabeth von
  • MacKenzie, Roderick C. I.
  • Nelson, Jenny
Charge transport in π -conjugated polymers is characterized by a strong degree of disorder in both the energy of conjugated segments and the electronic coupling between adjacent sites. This disorder arises from variations in the structure and conformation of molecular units, as well as the weak intermolecular binding interactions. Although disorder in molecular conformation can be expected to influence the density of states (DOS) distribution—and hence, optoelectronic properties of the material—until now, there has been no direct study of the relationship between a distinct conformational defect and the charge transport properties of a conjugated polymer. Here, we investigate the impact of introducing an extended, planarized chain geometry, known as the “ β -phase,” on hole transport through otherwise amorphous films of poly(9,9-dioctylfluorene) (PFO). We show that while β -phase introduces a striking drop of about a hundredfold in time-of-flight (TOF) hole mobility ( μ h ) at room temperature, it reduces the steady-state μ h measured from hole-only devices by a factor of less than about 5. In order to reconcile these observations, we combine high-dynamic-range TOF photocurrent spectroscopy and energy-resolved electrochemical impedance spectroscopy to extract the hole DOS of the conjugated polymer. Both methods show that the effect of the β -phase content is to introduce a sharp sub-bandgap feature into the DOS of glassy PFO lying about 0.3 eV above the highest occupied molecular orbital. The observed energy of the conformational trap is consistent with electronic structure calculations using a tight-binding approach. Using the obtained DOS with a drift-diffusion model capable of resolving charge carriers in both time and energy, we show how the seemingly contradictory transport phenomena obtained via the time-resolved, frequency-resolved, and steady-state methods are reconciled. The results highlight the significance of energetic redistribution of charge carriers in affecting transport behavior. This work demonstrates how charge-carrier mobility in organic semiconductors can be controlled via molecular conformation, and it resolves a long-standing debate over how different (equilibrium versus nonequilibrium) transport techniques reveal electronic properties of disordered solids in a unified manner., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlating the Phase Behavior with the Device Performance in Binary Poly-3-hexylthiophene: Nonfullerene Acceptor Blend Using Optical Probes of the Microstructure

  • Rezasoltani, Elham
  • Guilbert, Anne A. Y.
  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Tuladhar, Sachetan M.
  • Hamid, Zeinab
  • Wadsworth, Andrew
  • McCulloch, Iain
  • Campoy Quiles, Mariano
  • Nelson, Jenny
The performance of photovoltaic devices based on blends of conjugated polymers with nonfullerene acceptors depends on the phase behavior and microstructure of the binary, which in turn depends on the chemical structures of the molecular components and the blend composition. We investigate the correlation between the molecular structure, composition, phase behavior, and device performance of a model system consisting of semicrystalline poly-3-hexylthiophene (P3HT) as the donor polymer and three nonfullerene acceptors, two of which (O-IDTBR/EH-IDTBR) have a planar core with different side chains and one (O-IDFBR) of which has a twisted core. We combine differential scanning calorimetry with optical measurements including UV–Vis spectroscopy, photoluminescence, spectroscopic ellipsometry, and Raman spectroscopy and photovoltaic device performance measurements, all at varying blend composition. For P3HT:IDTBR blends, the crystallinity of polymer and acceptor is preserved over a wide composition range and the blend displays a eutectic phase behavior, with the optimum solar cell composition lying close to the eutectic composition. For P3HT:IDFBR blends, increasing acceptor content disrupts the polymer crystallinity, and the optimum device composition appears to be limited by polymer connectivity rather than being linked to the eutectic composition. The optical probes allow us to probe both the crystalline and amorphous phases, clearly revealing the compositions at which component mixing disrupts crystallinity., E.R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges the financial support from the European Cooperation in Science and Technology. J.N. acknowledges the financial support from the Engineering and Physical Science Research Council (grants nos. EP/P005543/1, EP/ R023581/1, and EP/P032591/1) and from the European Research Council for funding (grant agreement no. 742708). J.N. and E.R. thank the Helmholtz Foundation for a Helmholtz International Fellow Award. A.A.Y.G. thanks the EPSRC for a postdoctoral fellowship award (grant no. EP/P00928X/1). The authors at ICMAB would like to acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ocho” Program for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. I.M. acknowledges funding from KAUST, as well as EPSRC Project EP/G037515/1, EP/M005143/1, ECFP7 Project SC2 (610115), and EP/N509486/1 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Color-tunable hybrid heterojunctions as semi-transparent photovoltaic windows for photoelectrochemical water splitting

  • Eisner, Flurin
  • Tam, Brian
  • Belova, Valentina
  • Ow, Wesley
  • Yan, Jun
  • Azzouzi, Mohammed
  • Kafizas, Andreas
  • Campoy Quiles, Mariano
  • Hankin, Anna
  • Nelson, Jenny
The strong but narrow-bandwidth absorption spectra of organic semiconductors make them excellent candidates for semi-transparent solar cell applications in which color specificity is important. In this study, using a hybrid heterojunction combining the transparent inorganic semiconductor copper thiocyanate (CuSCN) with organic semiconductors (C70, PC70BM, C60, ITIC, IT-4F, or Y6), we show that simple color-tunable solar cells can be fabricated in which the transmission spectrum is determined solely by choice of the organic semiconductor. Using a joint electrical-optical model, we show that it is possible to combine the unique attributes of high photovoltage and color tunability to use these heterojunctions as photovoltaic windows in tandem photoelectrochemical (PEC)-photovoltaic (PV) cells. We demonstrate that this configuration can lead to a reduction in the parasitic absorption losses in the PEC-PV cells and, thus, to solar-to-hydrogen efficiencies (>3%) that are higher than that predicted using the traditionally used architecture in which the PV is placed behind the PEC., F.E. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via a postdoctoral prize fellowship. J.N. is grateful for funding from the EPSRC (grants EP/ P005543/1 and EP/M025020/1) and the European Research Council (ERC) under the European Union Horizon 2020 Research and Innovation Program (grant agreement 742708). M.C.Q. and V.B. thank the ERC through support via grant agreement 648901. B.T. thanks the Imperial College President’s Ph.D. scholarship scheme. A.K. thanks the Imperial College for a junior research fellowship, the EPSRC for a Capital Award Emphasising Support for Early Career Researchers, and the Royal Society for an equipment grant (RSG\R1\180434)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identifying structure–absorption relationships and predicting absorption strength of non-fullerene acceptors for organic photovoltaics

  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Pearce, Drew
  • Douglas, Hana
  • Bili, Danai
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Virbule, Alise
  • Rezasoltani, Elham
  • Belova, Valentina
  • Dörling, Bernhard
  • Few, Sheridan
  • Szumska, Anna A.
  • Hou, Xueyan
  • Zhang, Guichuan
  • Yip, Hin-Lap
  • Campoy Quiles, Mariano
  • Nelson, Jenny
Non-fullerene acceptors (NFAs) are excellent light harvesters, yet the origin of their high optical extinction is not well understood. In this work, we investigate the absorption strength of NFAs by building a database of time-dependent density functional theory (TDDFT) calculations of ∼500 π-conjugated molecules. The calculations are first validated by comparison with experimental measurements in solution and solid state using common fullerene and non-fullerene acceptors. We find that the molar extinction coefficient (εd,max) shows reasonable agreement between calculation in vacuum and experiment for molecules in solution, highlighting the effectiveness of TDDFT for predicting optical properties of organic π-conjugated molecules. We then perform a statistical analysis based on molecular descriptors to identify which features are important in defining the absorption strength. This allows us to identify structural features that are correlated with high absorption strength in NFAs and could be used to guide molecular design: highly absorbing NFAs should possess a planar, linear, and fully conjugated molecular backbone with highly polarisable heteroatoms. We then exploit a random decision forest algorithm to draw predictions for εd,max using a computational framework based on extended tight-binding Hamiltonians, which shows reasonable predicting accuracy with lower computational cost than TDDFT. This work provides a general understanding of the relationship between molecular structure and absorption strength in π-conjugated organic molecules, including NFAs, while introducing predictive machine-learning models of low computational cost., J. N., J. Y., D. P., M. A., F. E., and E. R. thank the European Research Council for support under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 742708 and 648901). The authors at ICMAB acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B-I00. E. R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges financial support from the European Cooperation in Science and Technology. M. A. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via doctoral studentships. F. E. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via the Post-Doctoral Prize Fellowship. X. R.-M. acknowledges Prof. Olle Inganäs and the Knut and Allice Wallenberg Foundation for funding of his current postdoctoral position. H.-L. Yip thanks the support from Guangdong Major Project of Basic and Applied Basic Research (2019B030302007). The TOC figure and Fig. 5a in the manuscript include freely available resources from Flaticon.com. J. Y. thank Xiaodan Ge for her support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

A computational exploration of the crystal energy and charge-carrier mobility landscapes of the chiral [6]helicene molecule

  • Rice, Beth
  • LeBlanc, Luc M
  • Otero de la Roza, Alberto|||0000-0002-4866-5816
We acknowledge a Royal Society University Research Fellowship (KEJ), and the EPSRC (EP/M017257/1, EP/P005543/1, EP/P000525/1, EP/L014580/1, EP/R00188X/1) for funding and ARCHER time through the Materials Chemistry Consortium (EP/L000202). BR thanks the EPSRC CDT in Theory and Simulation of Materials (EP/L015579/1) for a PhD studentship. JN acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 742708)