Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Energy transfer and interference by collective electromagnetic coupling

  • Gómez-Castaño, M.
  • Redondo Cubero, Andrés
  • Buisson, Lionel
  • Pau Vizcaíno, José Luis
  • Mihi, Agustín
  • Ravaine, Serge
  • Vallée, Renaud A. L.
  • Nitzan, Abraham
  • Sukharev, Maxim
The physics of collective optical response of molecular assemblies,pioneered by Dicke in 1954, has long been at the center of theoretical andexperimental scrutiny. The influence of the environment on such phenomena isalso of great interest due to various important applications in, e.g., energyconversion devices. In this Letter, we demonstrate both experimentally andtheoretically the spatial modulations of the collective decay rates of moleculesplaced in proximity to a metal interface. We show in a very simple framework howthe cooperative optical response can be analyzed in terms of intermolecularcorrelations causing interference between the response of different molecules andthe polarization induced on a nearby metallic boundary and predict similarcollective interference phenomena in excitation energy transfer betweenmolecular aggregates, This work is sponsored in part by the Air Force Office of Scientific Research under Grant Nos. FA9550-15-1-0189 and FA9550-19-1-0009 (M.S.), the U.S. National Science Foundation, Grant Nos. CHE1665291 (A.N.), CTQ2017-84309-C2-2-R (A.R.-C. and J.L.P.), P2018/NMT4349 Comunidad de Madrid (A.R.-C. and J.L.P.), RYC-2015-18047 (A.R.-C.), and the US-Israel Binational Science Foundation, Grant No. 2014113 (M.S. and A.N.). We thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grants MAT2016-79053-P and Grant SEV-2015-0496. This project has received funding from the European Research Council (Grant Agreement No. 637116). This work was also financially supported by the French National Research Agency (ANR) as part of the Initiative for Excellence IdEx Bordeaux program (Grant ANR-10-IDEX-03-02)
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Geometric frustration in a hexagonal lattice of plasmonic nanoelements

  • Conde Rubio, Ana
  • Fraile Rodríguez, Arantxa
  • Borrisé, Xavier
  • Pérez Murano, Francesc
  • Batlle Gelabert, Xavier
  • Labarta, Amílcar
We introduce the concept of geometric frustration in plasmonic arrays of nanoelements. In particular, we present the case of a hexagonal lattice of Au nanoasterisks arranged so that the gaps between neighboring elements are small and lead to a strong near-field dipolar coupling. Besides, far-field interactions yield higher-order collective modes around the visible region that follow the translational symmetry of the lattice. However, dipolar excitations of the gaps in the hexagonal array are geometrically frustrated for interactions beyond nearest neighbors, yielding the destabilization of the low energy modes in the near infrared. This in turn results in a slow dynamics of the optical response and a complex interplay between localized and collective modes, a behavior that shares features with geometrically frustrated magnetic systems.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Geometric frustration in ordered lattices of plasmonic nanoelements

  • Conde Rubio, Ana
  • Fraile Rodríguez, Arantxa
  • Espinha, André
  • Mihi, Agustín
  • Pérez Murano, Francesc
  • Batlle Gelabert, Xavier
  • Labarta, Amílcar
Inspired by geometrically frustrated magnetic systems, we present the optical response of three cases of hexagonal lattices of plasmonic nanoelements. All of them were designed using a metal-insulator-metal configuration to enhance absorption of light, with elements in close proximity to exploit near-field coupling, and with triangular symmetry to induce frustration of the dipolar polarization in the gaps between neighboring structures. Both simulations and experimental results demonstrate that these systems behave as perfect absorbers in the visible and/or the near infrared. Besides, the numerical study of the time evolution shows that they exhibit a relatively extended time response over which the system fluctuates between localized and collective modes. It is of particular interest the echoed excitation of surface lattice resonance modes, which are still present at long times because of the geometric frustration inherent to the triangular lattice. It is worth noting that the excitation of collective modes is also enhanced in other types of arrays where dipolar excitations of the nanoelements are hampered by the symmetry of the array. However, we would like to emphasize that the enhancement in triangular arrays can be significantly larger because of the inherent geometric incompatibility of dipolar excitations and three-fold symmetry axes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin Semiconductor Superabsorbers from the Visible to the Near-Infrared

  • Molet, Pau
  • García Pomar, Juan Luis
  • Matricardi, Cristiano
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
The design of ultrathin semiconducting materials that achieve broadband absorption is a long-sought-after goal of crucial importance for optoelectronic applications. To date, attempts to tackle this problem consisted either of the use of strong—but narrowband—or broader—but moderate—light-trapping mechanisms. Here, a strategy that achieves broadband optimal absorption in arbitrarily thin semiconductor materials for all energies above their bandgap is presented. This stems from the strong interplay between Brewster modes, sustained by judiciously nanostructured thin semiconductors on metal films, and photonic crystal modes. Broadband near-unity absorption in Ge ultrathin films is demonstrated, which extends from the visible to the Ge bandgap in the near-infrared and is robust against angle of incidence variation. The strategy follows an easy and scalable fabrication route enabled by soft nanoimprinting lithography, a technique that allows seamless integration in many optoelectronic fabrication procedures., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grant MAT2016-79053-P. A.M. was funded by a Ramón y Cajal fellowship (RYC-2014-16444). The work at ICMAB was carried out under the auspices of the Spanish Severo Ochoa Centre of Excellence programme (Grant No. SEV-2015-0496). This project has received funding from the European Research Council (ERC ENLIGHTMENT) under the European Union's Horizon 2020 research and innovation programme (Grant No. 637116)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydroxypropyl cellulose photonic architectures by soft nanoimprinting lithography

  • Espinha, André
  • Dore, Camilla
  • Matricardi, Cristiano
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
  • Mihi, Agustín
As contamination and environmental degradation increase nowadays, there is a huge demand for new eco-friendly materials. Despite its use for thousands of years, cellulose and its derivatives have gained renewed interest as favourable alternatives to conventional plastics, due to their abundance and lower environmental impact. We report the fabrication of photonic and plasmonic structures by moulding hydroxypropyl cellulose into sub-micrometric periodic lattices, using soft lithography. This is an alternative way to achieve structural colour in this material which is usually obtained exploiting its chiral nematic phase. Cellulose based photonic crystals are biocompatible and can be dissolved in water or not depending on the derivative employed. Patterned cellulose membranes exhibit tuneable colours and may be used to boost the photoluminescence of a host organic dye. Furthermore, we show how metal coating these cellulose photonic architectures leads to plasmonic crystals with excellent optical properties acting as disposable surface enhanced Raman spectroscopy substrates., The authors would like to acknowledge M. Simón and A. Gómez for AFM measurements. The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and also for its support through Grant MAT2016-79053-P. AM was funded by a Ramón y Cajal fellowship (RYC-2014-16444). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gold Nanoparticle Plasmonic Superlattices as Surface Enhanced Raman Spectroscopy Substrates

  • Matricardi, Cristiano
  • Hanske, Christoph
  • García Pomar, Juan Luis
  • Langer, Judith
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
Metal colloids are of great interest in the field of nanophotonics, mainly due to their morphology-dependent optical properties, but also because they are high quality building blocks for complex plasmonic architectures. Close-packed colloidal supercrystals not only serve for investigating the rich plasmonic resonances arising in strongly coupled arrangements, but also enables tailoring the optical response, on both the nano- and the macroscale. Bridging these vastly different length scales at reasonable fabrication costs has remained fundamentally challenging, but is essential for applications in sensing, photovoltaics or optoelectronics, among other fields. We present here a scalable approach to engineer plasmonic supercrystal arrays, based on the template-assisted assembly of gold nanospheres with topographically patterned polydimethylsiloxane molds. Regular square arrays of hexagonally packed supercrystals were achieved, reaching periodicities down to 400 nm and feature sizes around 200 nm, over areas up to 0.5 cm2. These two-dimensional supercrystals exhibit well-defined collective plasmon modes that can be tuned from the visible through the near-infrared by simple variation of the lattice parameter. We present electromagnetic modelling of the physical origin of the underlying hybrid modes, and demonstrate the application of superlattice arrays as surface-enhanced Raman scattering (SERS) spectroscopy substrates which can be tailored for a specific probe laser. We therefore investigated the influence of the lattice parameter, local degree of order, and cluster architecture, to identify the optimal configuration for highly efficient SERS of a non-resonant Raman probe with 785 nm excitation., The authors thank Dr. Guillermo González-Rubio for providing nanoparticles and assistance with the synthesis. C.H. acknowledges funding from the Alexander von Humboldt Foundation through a Feodor Lynen fellowship. Funding by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged (Grant SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program, and Grants MAT2016-79053-P and MAT2017-86659-R). A.M. is grateful to the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A water-processable cellulose-based resist for advanced nanofabrication

  • Dore, Camilla
  • Osmond, Johann
  • Mihi, Agustín
The ideal nanofabrication technique is one that allows the mass production of high resolution submicrometric features in a cost efficient and environmentally friendly fashion. A great step towards achieving this goal has been the development of nanoimprinting lithography, a procedure with tenths of nanometres resolution while being compatible with roll-to-roll manufacturing. However, an ecofriendly resist that can be efficiently combined with this process is still missing. In this work, we demonstrate the use of hydroxypropyl cellulose (HPC) as a biocompatible, biodegradable, and water processable resist for temperature assisted nanoimprint lithography (tNIL) by fabricating different photonic architectures. The cellulose derivative is easily patterned with submicrometric features with aspect ratios greater than 1 using an elastomeric stamp and a hot plate. Silicon photonic crystals and metal nanoparticle arrays are fabricated combining cellulose with traditional nanofrabrication processes such as spincasting, reactive ion etching and metal lift off. Furthermore, advanced nanofabrication possibilities are within reach by combining the HPC with traditional resists. In particular, poly(methyl methacrylate) and HPC stacks are easily produced by liquid phase processing, where one of the two materials can be selectively removed by developing in orthogonal solvents. This capability becomes even more interesting by including nanoimprinted layers in the stack, leading to the encapsulation of arrays of air features in the resist., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016-79053-P and through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. AM was funded by a Ramón y Cajal fellowship (RYC-2014-16444). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). The authors would like to acknowledge M. Simón and A. Gómez for AFM measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable index metamaterials made by bottom-up approaches

  • Gómez Castaño, Mayte
  • Hanbin, Zheng
  • García Pomar, Juan Luis
  • Vallée, Renaud
  • Mihi, Agustín
  • Ravaine, Serge
Despite the exciting optical properties metamaterials exhibit, their implementation in nowadays technology is being hampered by the inherent losses of their metal constituents and the expensive and low-throughput used procedures. As an alternative, we present a new design of double fishnet metamaterials that can be easily realized combining two inexpensive and up scalable techniques: nanosphere lithography and metallic electrodeposition. A monolayer of polystyrene spheres is used as template for the infiltration of two symmetric gold layers separated by an air gap. The effective refractive index of the metamaterial can be easily tuned by the proper choice of the diameter of the spheres and the gap width between the metallic layers, varying its value from positive to negative. The good agreement between optical measurements and finite-difference time-domain simulations confirms the success of our process. Fishnet metamaterials with refractive index going from 1.5 until -1.0 in the near infrared range are demonstrated and the key parameters for these architectures provided., This work was supported by the French National Research Agency (ANR) as part of the Initiative for Excellence IdEx Bordeaux program (ANR-10-IDEX-03-02) and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through grant MAT2016-79053-P and through grant SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant no. 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Geometric frustration in ordered lattices of plasmonic nanoelements

  • Conde Rubio, Ana
  • Fraile Rodríguez, Arantxa
  • Espinha, André
  • Mihi, Agustín
  • Perez Murano, Francesc X.
  • Batlle, Xavier
  • Labarta, Amilcar
Inspired by geometrically frustrated magnetic systems, we present the optical response of three cases of hexagonal lattices of plasmonic nanoelements. All of them were designed using a metal-insulatormetal configuration to enhance absorption of light, with elements in close proximity to exploit near-field coupling, and with triangular symmetry to induce frustration of the dipolar polarization in the gaps between neighboring structures. Both simulations and experimental results demonstrate that these systems behave as perfect absorbers in the visible and/or the near infrared. Besides, the numerical study of the time evolution shows that they exhibit a relatively extended time response over which the system fluctuates between localized and collective modes. It is of particular interest the echoed excitation of surface lattice resonance modes, which are still present at long times because of the geometric frustration inherent to the triangular lattice. It is worth noting that the excitation of collective modes is also enhanced in other types of arrays where dipolar excitations of the nanoelements are hampered by the symmetry of the array. However, we would like to emphasize that the enhancement in triangular arrays can be significantly larger because of the inherent geometric incompatibility of dipolar excitations and three-fold symmetry axes., This work was supported by Spanish MINECO (MAT2015-68772- P, BES-2013-065377), Spanish ICTS Network MICRONANOFABS, partially supported by MINECO, and European Union FEDER funds. A.M. acknowledges funding from the European Research Council (ERC) grant agreement 637116., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent-Assisted Self-Assembly of Gold Nanorods into Hierarchically Organized Plasmonic Mesostructures

  • Hanske, Christoph
  • Hill, Eric H.
  • Vila Liarte, David
  • González-Rubio, Guillermo
  • Matricardi, Cristiano
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
Plasmonic supercrystals and periodically structured arrays comprise a class of materials with unique optical properties that result from the interplay of plasmon resonances, as well as near and far field coupling. Controlled synthesis of such hierarchical structures remains a fundamental challenge, as it demands strict control over the assembly morphology, array size, lateral spacing, and macroscale homogeneity. Current fabrication approaches involve complicated multi-step procedures lacking scalability and reproducibility, which has hindered the practical application of plasmonic supercrystal arrays. Herein, these challenges are addressed by adding an organic solvent to achieve kinetic control over the template-assisted colloidal assembly of nanoparticles from aqueous dispersion. This method yields highly regular periodic arrays, with feature sizes ranging from less than 200 nm up to tens of microns. A combined experimental/computational approach reveals that the underlying mechanism is a combination of the removal of interfacial surfactant micelles from the particle interface and altered capillary flows. Assessing the efficacy of such square arrays for surface-enhanced Raman scattering spectroscopy, we find that a decrease of the lattice periodicity from 750 nm down to 400 nm boosts the signal by more than an order of magnitude, thereby enabling sensitive detection of analytes, such as the bacterial quorum sensing molecule pyocyanin, even in complex biological media., This work has been funded by the Spanish MINECO (Grant MAT2017- 86659-R). C.H. acknowledges the Alexander von Humboldt Foundation for funding in the framework of a Feodor Lynen fellowship. E.H.H. acknowledges receipt of a Juan de la Ciervafellowship (FJCI-2014-22598). A.M. is grateful to the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 637116, ENLIGHTMENT) and funding by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) (Grant SEV-2015-0496 and MAT2016-79053-P. We further thank Mathias Charconnet for fruitful discussions and Vished Kumar for TEM imaging. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy Transfer and Interference by Collective Electromagnetic Coupling

  • Gómez Castaño, Mayte
  • Redondo Cubero, Andres
  • Buisson, Lionel
  • Pau, José Luis
  • Mihi, Agustín
  • Ravaine, Serge
  • Vallée, Renaud
  • Nitzan, Abraham
  • Sukharev, Maxim
The physics of collective optical response of molecular assemblies, pioneered by Dicke in 1954, has long been at the center of theoretical and experimental scrutiny. The influence of the environment on such phenomena is also of great interest due to various important applications in, e.g., energy conversion devices. In this Letter, we demonstrate both experimentally and theoretically the spatial modulations of the collective decay rates of molecules placed in proximity to a metal interface. We show in a very simple framework how the cooperative optical response can be analyzed in terms of intermolecular correlations causing interference between the response of different molecules and the polarization induced on a nearby metallic boundary and predict similar collective interference phenomena in excitation energy transfer between molecular aggregates., The physics of collective optical response of molecular assemblies, pioneered by Dicke in 1954, has long been at the center of theoretical and experimental scrutiny. The influence of the environment on such phenomena is also of great interest due to various important applications in, e.g., energy conversion devices. In this Letter, we demonstrate both experimentally and theoretically the spatial modulations of the collective decay rates of molecules placed in proximity to a metal interface. We show in a very simple framework how the cooperative optical response can be analyzed in terms of intermolecular correlations causing interference between the response of different molecules and the polarization induced on a nearby metallic boundary and predict similar collective interference phenomena in excitation energy transfer between molecular aggregates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Narrow Line Width Quantum Emitters in an Electron-Beam-Shaped Polymer

  • Ciancico, Carlotta
  • Schadler, Kevin G.
  • Pazzagli, Sofia
  • Colautti, Maja
  • Lombardi, Pietro
  • Osmond, Johann
  • Dore, Camilla
  • Mihi, Agustín
  • Ovvyan, Anna P.
  • Pernice, Wolfram H. P.
  • Berretti, E.
  • Lavacchi, A.
  • Toninelli, Costanza
  • Koppens, Frank H. L.
  • Reserbat-Plantey, Antoine
Solid-state single photon sources (SPSs) with narrow line width play an important role in many leading quantum technologies. Within the wide range of SPSs studied to date, single fluorescent molecules hosted in organic crystals stand out as bright, photostable SPSs with a lifetime-limited optical resonance at cryogenic temperatures. Furthermore, recent results have demonstrated that photostability and narrow line widths are still observed from single molecules hosted in a nanocrystalline environment, which paves the way for their integration with photonic circuitry. Polymers offer a compatible matrix for embedding nanocrystals and provide a versatile yet low-cost approach for making nanophotonic structures on chip that guide light and enhance coupling to nanoscale emitters. Here, we present a deterministic nanostructuring technique based on electron-beam lithography for shaping polymers with embedded single molecules. Our approach provides a direct means of structuring the nanoscale environment of narrow line width emitters while preserving their emission properties., We would like to thank Josep Canet Ferrer and Vittoria Finazzi. This project has received funding from the EraNET Cofund Initiatives QuantERA under the European Union’s Horizon 2020 research and innovation programme grant agreement No. 731473 (Project acronyme: ORQUID). C.C. acknowledges financial support by the ICFOstepstone - PhD Programme for Early-Stage Researchers in Photonics, funded by the Marie Skłodowska-Curie Co-funding of regional, national, and international programmes (GA665884) of the European Commission. C.D. acknowledges financial support by the European Union’s Horizon 2020 research and innovation programme (ERC Grant No. StG637116). A.L. and E.B. acknowledge “Ente cassa di risparmio di Firenze” for financial support given for the acquisition of the TESCAN GAIA3 electron microscope , and Regione Toscana for the project FELIX (POR FESR 2014-2020, grant number no. 6455). We also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO), through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522 and SEV-2015-0496), support by Fundaciò Cellex Barcelona, Generalitat de Catalunya through the CERCA program. This work received funding from the European Union’s Horizon 2020 research and innovation program Quantum Flagship (Grant No. 820378). Funded by the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructured Back Reflectors for Efficient Colloidal Quantum-Dot Infrared Optoelectronics

  • Baek, Se-Woong
  • Molet, Pau
  • Choi, Min-Jae
  • Biondi, Margherita
  • Ouellette, Olivier
  • Fan, James
  • Hoogland, Sjoerd
  • García de Arquer, F. Pelayo
  • Mihi, Agustín
  • Sargent, Edward H.
Colloidal quantum dots (CQDs) can be used to extend the response of solar cells, enabling the utilization of solar power that lies to the red of the bandgap of c‐Si and perovskites. To achieve largely complete absorption of infrared (IR) photons in CQD solids requires thicknesses on the micrometer range; however, this exceeds the typical diffusion lengths (≈300 nm) of photoexcited charges in these materials. Nanostructured metal back electrodes that grant the cell efficient IR light trapping in thin active layers with no deterioration of the electrical properties are demonstrated. Specifically, a new hole‐transport layer (HTL) is developed and directly nanostructured. Firstly, a material set to replace conventional rigid HTLs in CQD devices is developed with a moldable HTL that combines the mechanical and chemical requisites for nanoimprint lithography with the optoelectronic properties necessary to retain efficient charge extraction through an optically thick layer. The new HTL is nanostructured in a 2D lattice and conformally coated with MoO3/Ag. The photonic structure in the back electrode provides a record photoelectric conversion efficiency of 86%, beyond the Si bandgap, and a 22% higher IR power conversion efficiency compared to the best previous reports., S.-W.B., P.M., and M.-J.C. contributed equally to this work. This work was supported by Ontario Research Fund-Research Excellence program (ORF7-Ministry of Research and Innovation, Ontario Research FundResearch Excellence Round 7), and by the Natural Sciences and Engineering Research Council (NSERC) of Canada. This work was also supported by the National Research Foundation of Korea (NRF) funded by NRF-2018R1A6A3A03012630. The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through grant nos. MAT2016-79053-P and SEV-2015-0496. This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant no. 637116). The authors thank L. Levina, R. Wolowiec, D. Kopilovic, E. Palmiano, and J. L. Garcia-Pomar for their help over the course of this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large area metasurfaces made with spherical silicon resonators

  • Molet, Pau
  • Gil Herrera, Luz Karimé
  • García Pomar, Juan Luis
  • Caselli, Niccolò
  • Blanco Montes, Álvaro
  • López, Cefe
  • Mihi, Agustín
High-index dielectric nanostructures have emerged as an appealing complement to plasmonic nanostructures, offering similar light management capabilities at the nanoscale but free from the inherent optical losses. Despite the great interest in these all-dielectric architectures, their fabrication still requires cumbersome fabrication techniques that limit their implementation in many applications. Hence, the great interest in alternative scalable procedures. Among those, the fabrication of silicon spheres is at the forefront, with several routes available in the literature. However, the exploitation of the Mie modes sustained by these silicon resonators is limited over large areas by polydispersity or a lack of long-range order. Here, we present an all-dielectric metamaterial fabricated with a low cost and highly scalable technique: a combination of soft imprinting nanolithography and chemical vapor deposition. The resulting all-dielectric metasurface is composed of an array of silicon hemispheres on top of a high refractive index dielectric substrate. This architecture allows the exploitation of high-quality Mie resonances at a large scale due to the high monodispersity of the hemispheres organized in a single crystal two-dimensional lattice. The optical response of the metasurface can be engineered by the design parameters of the nanoimprinted structure. We further demonstrate the potential of this platform to enhance light emission by coupling dye molecules to the sustained Mie resonances and measuring both an eight-fold amplified signal and a triple lifetime reduction., We greatly acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities with projects MAT2016-79053-P and RTI2018-093921-B-C41 and the excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council under the European Union’s Horizon 2020 research and innovation program (grant number 637116, Funder Id: http://dx.doi.org/10.13039/100010663). P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and UAB school doctoral program. L.K.G. acknowledges a COLCIENCIAS doctoral grant. N.C. acknowledges the JdlC programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Near infrared organic photodetectors based on enhanced charge transfer state absorption by photonic architectures

  • Gibert Roca, Martí
  • Molet, Pau
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Near infrared photodetectors are a widespread and fundamental technology in many disciplines, from astronomy and telecommunications to medical sciences. Current technologies are now striving to include new aspects in this technology such as wearability, flexibility and tunability. Organic photodetectors easily offer many of those advantages but their relatively high bandgaps hinder NIR operation. In this work, we demonstrate solution processed organic photodetectors with improved NIR response thanks to a nanostructured active layer in the shape of a photonic crystal. The latter strongly increases the charge transfer state absorption, which is normally weak but broadband, increasing the optical path of light and resulting in remarkable photoresponse significantly below the band gap of the blend. We show responsivities up to 50 mA W−1 at 900 nm for PBTTT:PC71BM based photodetectors. On top of that, by varying the lattice parameter of the photonic crystal structure, the spectral response of the photodetectors can be tuned beyond 1000 nm. Furthermore, our photonic structure can be easily implemented in the device in a single nanoimprinting step, with minimal disruption on the fabrication process, which makes this approach very promising for upscaling., We greatly acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades MICINN with projects PGC2018-095411-B-I00, MAT2016-79053-P and MAT2015-70850-P and the “Severo Ochoa” excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grants no. CoG648901 and StG637116). P. M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF. M. G. R. acknowledges financial support from an FPU grant (no. 16/02631) (2017) of the MICINN (Spain). M. G. R. and P. M. B. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission

  • Vila Liarte, David
  • Feil, Maximilian W.
  • Manzi, Aurora
  • García Pomar, Juan Luis
  • Huang, He
  • Döblinger, Markus
  • Liz-Marzán, Luis Manuel
  • Feldmann, Jochen
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light management strategy involving additional processing steps. Here, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr 3 perovskite NC colloids into large area (1 cm 2 ) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr 3 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal., D. Vila-Liarte and M. W. Feil have contributed equally to this work. We acknowledge financial support by the Bavarian State Ministry of Science, Research, and Arts through the grant “Solar Technologies go Hybrid (SolTech)”. We thank local research clusters and centers such as CeNS for providing communicative networking structures. We also acknowledge support from the Spanish Ministerio de Ciencia e Innovación through Grants No. SEV-2015-0496 and MDM-2017-0720, in the framework of the Spanish Severo Ochoa and María de Maeztu Centers of Excellence program. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). H.H acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 839042., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrodeposited Negative Index Metamaterials with Visible and Near Infrared Response

  • Gómez Castaño, Mayte
  • García Pomar, Juan Luis
  • Pérez, Luis Alberto
  • Shanmugathasan, Sharvina
  • Ravaine, Serge
  • Mihi, Agustín
Negative index metamaterials have revolutionized the field of photonics because of their unconventional electromagnetic properties absent in naturally occurring materials. It remains a challenge however, to achieve strong negative refractive index at optical frequencies over large areas in a device compatible fashion. In this work, a scalable method for the straightforward production of fishnet‐like negative index metamaterials combining soft nanoimprinting and electrodeposition is reported. In four simple steps, 2D arrays of pillars surrounded by metal–insulator–metal stacks made of gold and air gaps are created. The proper design of the geometrical features leads to negative indices from the visible to the near infrared, with values from ‐1.2 at 700 nm to ‐2.8 at 910 nm. The metamaterials are prepared on transparent conductive electrodes hence ready for device implementation. In addition, the nanostructures display high optical quality, which is corroborated with numerical simulations under normal and oblique incidence. As a proof of concept, the accessibility to the porosity of the metamaterial by studying the spectral changes produced when infiltrating different liquids through the metallic layers is demonstrated. The resonant wavelength increasing with the refractive index of the media makes the metamaterials potential platforms for both negative index structures and optical sensors., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through grant MAT2016‐79053‐P, the excellence program SEV‐2015‐0496, Generalitat de Catalunya program AGAUR 2017‐SGR‐00488, and by the French National Research Agency (ANR) as part of the program Initiative for Excellence IdEx Bordeaux (ANR‐10‐IDEX‐03‐02). This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and innovation program (grant number 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Throughput Nanofabrication of Metasurfaces with Polarization-Dependent Response

  • Matricardi, Cristiano
  • García Pomar, Juan Luis
  • Molet, Pau
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Metal nanostructures offer exciting ways to manage light at the nanoscale exploited in fields such as imaging, sensing, energy conversion, and information processing. The optical response of the metallic architectures can be engineered to exhibit photonic properties that span from plasmon resonances to more complex phenomena such as negative refractive index, optical chirality, artificial magnetism, and more. However, the latter optical properties are only observed in intricate architectures, which are highly demanding in terms of nanofabrication and hence less scalable and far away from device implementation. Here, a series of metasurfaces covering centimeter areas and operating in the visible spectrum are presented, which are produced from the combination of nanoimprinting lithography and oblique angle metal evaporation. The potential of this scalable approach is illustrated by easily fabricating metasurfaces engineered to exhibit artificial optical magnetism, tunable linear polarization dependent response, chirality with g‐factor of 0.2, and photoluminescence enhancement of 20 times over a 9 mm2 area., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016‐79053‐P and through Grant No. SEV‐2015‐0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement Nos. 637116, ENLIGHTMENT and 648901, FOREMAT) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofunded by the ESF. L.A.P. is thankful to the Marie Sklodowska‐Curie Actions (H2020‐MSCA‐IF‐2018) for grant agreement No. 839402, PLASMIONICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydroxypropyl Cellulose Adhesives for Transfer Printing of Carbon Nanotubes and Metallic Nanostructures

  • Dore, Camilla
  • Dörling, Bernhard
  • García Pomar, Juan Luis
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Transfer printing is one of the key nanofabrication techniques for the large‐scale manufacturing of complex device architectures. It provides a cost‐effective and high‐throughput route for the integration of independently processed materials into spatially tailored architectures. Furthermore, this method enables the fabrication of flexible and curvilinear devices, paving the way for the fabrication of a new generation of technologies for optics, electronics, and biomedicine. In this work, hydroxypropyl cellulose (HPC) membranes are used as water soluble adhesives for transfer printing processes with improved performance and versatility compared to conventional silicone alternatives. The high‐water solubility and excellent mechanical properties of HPC facilitate transfer printing with high yield for both metal and carbon nanotubes (CNTs) inks. In the case of metal inks, crack‐free stripping of silver films and the simple fabrication of Moiré Plasmonic architectures of different geometries are demonstrated. Furthermore, HPC membranes are used to transfer print carbon nanotube films with different thicknesses and up to 77% transparency in the visible and near infrared region with potential applications as transparent conductive substrates. Finally, the use of prepatterned HPC membranes enables nanoscale patterning of CNT with feature resolution down to 1 µm., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT and No. 648901) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. The Spanish Ministerio de Ciencia e Innovación is gratefully acknowledged for its support through Grant Nos. PGC2018‐095411‐B‐I00, PID2019‐106860GB‐I00, and SEV‐2015‐0496, in the framework of the Spanish Severo Ochoa Centre of Excellence program. This work was done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Directional Light Extraction from Patterned Rare‐Earth Phosphor Films

  • Cabello-Olmo, Elena
  • Molet, Pau
  • Mihi, Agustín
  • Lozano, Gabriel
  • Míguez, Hernán
The combination of light‐emitting diodes (LEDs) and rare earth (RE) phosphors as color‐converting layers comprises the basis of solid‐state lighting. Indeed, most LED lamps include a photoluminescent coating made of phosphor material, i.e., crystalline matrix suitably doped with RE elements, to produce white light from a blue or ultraviolet LED chip. Transparent phosphor‐based films constitute starting materials for new refined emitters that allow different photonic designs to be implemented. Among the different photonic strategies typically employed to tune or enhance emission, surface texturing has proved its versatility and feasibility in a wide range of materials and devices. However, most of the nanofabrication techniques cannot be applied to RE phosphors directly because of their chemical stability or because of their cost. The first monolithic patterned structure of down‐shifting nanophosphors with square arrays of nanoholes with different lattice parameters is reported in this study. It is shown that a low‐cost soft‐nanolithography procedure can be applied to red‐emitting nanophosphors (GdVO4:Eu3+ nanocrystals) to tune their emission properties, attaining a twofold directional enhancement of the emitted light at predesigned emission wavelengths in specific directions., This project received funding from the Spanish Ministry of Economy and Competitiveness under grant MAT2017‐88584‐R (AEI/FEDER, UE) and PID2019‐106860GB‐I00 (AEI/FEDER, UE), the excellence program SEV‐2015‐0496, and the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (NANOPHOM, grant agreement no. 715832 and ENLIGHTMENT, grant no. 637116). P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB. E.C.O. acknowledges the Spanish Ministry of Universities for the funding through an FPU program (FPU19/00346)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large-Scale Soft-Lithographic Patterning of Plasmonic Nanoparticles

  • Chiang, Naihao
  • Scarabelli, Leonardo
  • Vinnacombe-Willson, Gail A.
  • Pérez, Luis Alberto
  • Dore, Camilla
  • Mihi, Agustín
  • Jonas, Steven J.
  • Weiss, Paul S.
Micro- and nanoscale patterned monolayers of plasmonic nanoparticles were fabricated by combining concepts from colloidal chemistry, self-assembly, and subtractive soft lithography. Leveraging chemical interactions between the capping ligands of pre-synthesized gold colloids and a polydimethylsiloxane stamp, we demonstrated patterning gold nanoparticles over centimeter-scale areas with a variety of micro- and nanoscale geometries, including islands, lines, and chiral structures (e.g., square spirals). By successfully achieving nanoscale manipulation over a wide range of substrates and patterns, we established a powerful and straightforward strategy, nanoparticle chemical lift-off lithography (NP-CLL), for the economical and scalable fabrication of functional plasmonic materials with colloidal nanoparticles as building blocks, offering a transformative solution for designing next-generation plasmonic technologies., The authors would like to thank the Nanoquim clean room facility at ICMAB-CSIC and, in particular, Dr. Luigi Morrone for help with the use of the microwriter for master preparation. We acknowledge the CNSI-EICN, ICMAB-CSIC, and ICN2 electron microscopy facilities for TEM and SEM imaging, WiTEC for access to their microscopy instrumentation, and Dr. Thomas Young and Michael Mellody for the preparation of silicon masters. Special thanks to Dr. Leonora Velleman for the fruitful discussion on nanoparticle self-assembly. L.S. research is supported by the Marie Sklodowska-Curie Actions SHINE (H2020-MSCA-IF-2019, grant agreement No. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement No. 839402, PLASMIONICO. L.S., L.A.P., C.D., and A.M. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). ICMAB acknowledges the Spanish Ministry of Economy and Competitiveness under grants PID2019-106860GB-I00 (AEI/FEDER, UE) and FUNFUTURE (CEX2019-000917-S) center of excellence Severo Ochoa program. This work has been performed in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. N.C. thanks the NIH NIBIB Pathway to Independence Award (K99EB028325) for support. S.J.J. is supported by the NIH Common Fund through a NIH Director’s Early Independence Award co-funded by the National Institute of Dental and Craniofacial Research and Office of the Director, NIH Grant DP5OD028181. S.J.J. also acknowledges Young Investigator Award funds from the Alex’s Lemonade Stand Foundation for Childhood Cancer Research and the Hyundai Hope on Wheels Foundation for Pediatric Cancer Research. P.S.W. thanks the National Science Foundation (2004238) for support of this work. Funds for core facility use were provided via a support voucher awarded to N.C. and S.J.J. via the UCLA Clinical and Translational Science Institute (CTSI) Core Voucher Program, which is administered through Grant Number UL1TR001881., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering Plasmonic Colloidal Meta-Molecules for Tunable Photonic Supercrystals

  • Molet, Pau
  • Passarelli, Nicolás
  • Pérez, Luis Alberto
  • Scarabelli, Leonardo
  • Mihi, Agustín
Ordered arrays of metal nanoparticles offer new opportunities to engineer light–matter interactions through the hybridization of Rayleigh anomalies and localized surface plasmons. The generated surface lattice resonances exhibit much higher quality factors compared to those observed in isolated metal nanostructures. Template-induced colloidal self-assembly has already shown a great potential for the scalable fabrication of 2D plasmonic meta-molecule arrays, but the experimental challenge of controlling optical losses within the repeating units has so far prevented this approach to compete with more standard fabrication methods in the production of high-quality factor resonances. In this manuscript, the optical properties of plasmonic arrays are investigated by varying the lattice parameter (between 200 and 600 nm) as well as the diameter of the gold colloidal building-blocks (between 11 ± 1 and 98 ± 6 nm). It is systematically studied how the internal architecture of the repeating gold-nanoparticle meta-molecules influences the optical response of the plasmonic supercrystals. Combining both experimental measurements and simulations, it is demonstrated how, reducing the size of the gold nanoparticles it is possible to switch from strong near-field plasmonic architectures to high-quality factors (>60) for lattice plasmon resonances located in the visible spectral range., P.M. and N.P. contributed equally to this work. This project had received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 637116, ENLIGHTMENT) and the Spanish Ministerio de Ciencia e Innovación through grant, PID2019-106860GB-I00 and FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.S. research was supported by the Marie Sklodowska-Curie Actions SHINE (H2020- MSCA-IF-2019, grant agreement no. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellow-ship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement no. 839402, PLASMIONICO. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB under the auspices of the UAB material science doctoral program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Photoluminescence of Cesium Lead Halide Perovskites by Quasi-3D Photonic Crystals

  • Mendoza Carreño, José
  • Passarelli, Nicolás
  • Otero, Clara
  • Polaravapu, Lakshminarayana
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
Cesium lead halide perovskite nanocrystals have emerged as one of the most promising candidates for manufacturing portable lasers and light sources. In order to harness and exploit their photoluminescence more effectively, the nanocrystals are often accompanied by a photonic scheme that improves light emission. In this work, one introduces a quasi-3D photonic crystal composed of a 2D-grating on top of a distributed Bragg reflector (DBR) that provides a greater photoluminescence enhancement than the isolated architectures alone. The quasi-3D photonic crystals support both Rayleigh-Wood anomalies and guided modes that populate the photonic bandgap of the Bragg mirror, all of them capable of enhancing the outcoupling of light from the emitting layer. In order to demonstrate the benefits of the quasi-3D system, one prepares 2D-gratings, DBRs, and quasi-3D photonic crystals covered with metal halide perovskite nanocrystals and studies the photoluminescence enhancement produced in each case. Interestingly, the quasi-3D structure exhibits a photoluminescence enhancement of 16 times and an increase in spontaneous emission rate, greatly exceeding the values observed for the separate components., This project was received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, Enlightment), the Generalitat de Catalunya (2017-SGR-00488), and the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GB-I00, PID2020-119777GB-I00 and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.P. acknowledges the support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (RYC2018-026103-I). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Geometric frustration in ordered lattices of plasmonic nanoelements

  • Conde Rubio, Ana
  • Fraile Rodríguez, Arantxa
  • Espinha, André
  • Mihi, Agustín
  • Pérez Murano, Francesc
  • Batlle Gelabert, Xavier
  • Labarta, Amílcar
Inspired by geometrically frustrated magnetic systems, we present the optical response of three cases of hexagonal lattices of plasmonic nanoelements. All of them were designed using a metal-insulator-metal configuration to enhance absorption of light, with elements in close proximity to exploit near-field coupling, and with triangular symmetry to induce frustration of the dipolar polarization in the gaps between neighboring structures. Both simulations and experimental results demonstrate that these systems behave as perfect absorbers in the visible and/or the near infrared. Besides, the numerical study of the time evolution shows that they exhibit a relatively extended time response over which the system fluctuates between localized and collective modes. It is of particular interest the echoed excitation of surface lattice resonance modes, which are still present at long times because of the geometric frustration inherent to the triangular lattice. It is worth noting that the excitation of collective modes is also enhanced in other types of arrays where dipolar excitations of the nanoelements are hampered by the symmetry of the array. However, we would like to emphasize that the enhancement in triangular arrays can be significantly larger because of the inherent geometric incompatibility of dipolar excitations and three-fold symmetry axes.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Geometric frustration in a hexagonal lattice of plasmonic nanoelements

  • Conde Rubio, Ana
  • Fraile Rodríguez, Arantxa
  • Borrisé, Xavier
  • Pérez Murano, Francesc
  • Batlle Gelabert, Xavier
  • Labarta, Amílcar
We introduce the concept of geometric frustration in plasmonic arrays of nanoelements. In particular, we present the case of a hexagonal lattice of Au nanoasterisks arranged so that the gaps between neighboring elements are small and lead to a strong near-field dipolar coupling. Besides, far-field interactions yield higher-order collective modes around the visible region that follow the translational symmetry of the lattice. However, dipolar excitations of the gaps in the hexagonal array are geometrically frustrated for interactions beyond nearest neighbors, yielding the destabilization of the low energy modes in the near infrared. This in turn results in a slow dynamics of the optical response and a complex interplay between localized and collective modes, a behavior that shares features with geometrically frustrated magnetic systems.