Skip to main content

METODOS QUIMICOS PARA EL DESARROLLO DE OXIDOS FERROELECTRICOS PARA FOTOVOLTAICA

MAT2017-83169-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self‐Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula
  • Hille, Pascal
  • Martí Sánchez, Sara
  • Mata, Maria de la
  • Coll, Mariona
  • Arbiol, Jordi
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2–10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO2 coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO2/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO2 based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10−16 cm2 s−1 at a temperature of 100 °C. Temperature‐dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of Al2O3, which is known as a poor oxygen ion conductor within the analyzed temperature regime., We thank Herbert Over from the Institute of Physical Chemistry at the JLU Giessen for sharing his knowledge and experience and helping improve the manuscript. Financial support was provided by the DFG via the GrK (Research training group) 2204 “Substitute Materials for sustainable Energy Technologies.” M.C. thanks Ramón y Cajal program RYC‐2013‐12448. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐ 2015‐0496) and MAT2017‐83169‐R AEI/FEDER,UE. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD),” supported by COST (European Cooperation in Science and Technology). S.M.S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa”’‐Severo Ochoa.” ICN2 members acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017‐85087‐C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV‐2013‐0295) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of this work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA‐Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Band gap tuning of solution processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez Díaz, Antonio
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications due to their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordi-narily high efficiencies. One of the biggest challenges so far is to reduce their band gap towards the visible while simultane-ously retaining ferroelectricity. To address these two issues, herein it is performed an elemental composition engineering of BiFeO3 by substituting Fe by Co cations, as means to tune the characteristics of the transition metal-oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase and stable BiFe1-xCoxO3 thin films for x=0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 eV to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, non-optimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible of the Co-substituted phase is improved with respect to the unsubsti-tuted oxide., We would like to acknowledge Prof. Josep Fontcuberta for fruitful discussions and comments on this study and for providing access to his experimental facilities. This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIPNANOSOLE- 2016, MAT2017-83169-R, MAT2014-51778-C2- 1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR- 1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901) and “L’Oreal UNESCO For Women in Science”. M.C., J.G. and I.F. acknowledge RyC contracts (2013-12448, 2012-11709 and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical Reduction of Undoped and Cobalt-Doped BiFeO3 Induced by Water Exposure: Quantitative Determination of Reduction Potentials and Defect Energy Levels Using Photoelectron Spectroscopy

  • Bein, Nicole S.
  • Machado, Pamela
  • Coll, Mariona
  • Chen, Feng
  • Makarovic, Maja
  • Rojac, Tadej
  • Klein, Andreas
The interaction of BiFeO3 and Co-doped BiFeO3 thin-film surfaces with water vapor is examined using photoelectron spectroscopy. Water exposure results in an upward shift of the Fermi energy, which is limited by the reduction of Bi and Fe in undoped BiFeO3 and by the reduction of Co in oxidized Co-doped BiFeO3. The results highlight the importance of surface potential changes induced by the interaction of solid surfaces with water and the ability of photoelectron spectroscopy to quantitatively determine electrochemical reduction potentials and defect energy levels., This work was supported by the LOEWE program of the State of Hesse, Germany, within the project FLAME (Fermi Level Engineering of Antiferroelectric Materials for Energy Storage and Insulation Systems). M.C. and P.M. acknowledge the financial support from the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R& D SEV-2015-0496 and MAT 2017-83169-R AEI/FEDER). T.R. and M.M. acknowledge the Slovenian Research Agency for funding (Program P2-0105 and Ph.D. Project PR-08350)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of phase stability and optoelectronic performance of BiFeO3 thin films via cation co-substitution

  • Machado, Pamela
  • Caño, Iván
  • Menéndez, César
  • Cazorla, Claudio
  • Tan, Huan
  • Fina, Ignasi
  • Campoy Quiles, Mariano
  • Escudero, Carlos
  • Tallarida, Massimo
  • Coll, Mariona
Compositional engineering of BiFeO3 can significantly boost its photovoltaic performance. Therefore, controlling site substitution and understanding how it affects the optical and electronic properties while achieving robust and stable phases is essential to continue progressing in this field. Here the influence of cation co-substitution in BiFeO3 on phase purity, optical and electronic properties is investigated by means of X-ray diffraction, spectroscopic ellipsometry and X-ray absorption spectroscopy, respectively. Piezoelectric force microscopy and ferroelectric characterization at room temperature has been carried out in co-doped BiFeO3 films. First-principles calculations are also performed and compared to the experimental observations. It is shown that the incorporation of La3+ in Bi(Fe,Co)O3 films improves phase purity and stability while preserving the reduced band gap achieved in metastable Bi(Fe,Co)O3. Moreover, it is suggested that the changes in the optoelectronic properties are mainly dictated by the hybridisation between unoccupied Co 3d and O 2p states along with the presence of Co3+/Co2+ species. This thorough study on (Bi,La)(Fe,Co)O3 thin films coupled with the use of a cost-effective and facile solution deposition synthesis increases the motivation to continue exploiting the potential of these perovskite materials., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (“Severo Ochoa” Programme for Centres of Excellence in R&D CEX2019-000917-S, MAT2017-83169-R, RTI2018-093996-B-C32, PID2019-107727RB-I00 (AEI/FEDER, EU)). P. M. thanks financial support from FPI fellowship (PRE2018-084618). C. M. and C. C. acknowledge computational resources and technical assistance from the Australian Government and the Government of Western Australia through the National Computational Infrastructure (NCI) and Magnus under the National Computational Merit Allocation Scheme and The Pawsey Supercomputing Centre. The authors acknowledge Prof. J. Fontcuberta for providing access to his experimental facilities and the support of ALBA staff for the successful performance of the measurements at CIRCE beamline of the ALBA Synchrotron Light Source. I. F. and C. C. acknowledge support from the Spanish Ministry of Science, Innovation and Universities under the “Ramón y Cajal” fellowship RYC2017-226531 and RYC2018-024947-I, respectively. M. C and I. F acknowledge Beca Leonardo from fundación BBVA. H. T is financially supported by China Scholarship Council (CSC) with no. 201906050014. The work of P. M. and H. T have been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile Chemical Route to Prepare Water Soluble Epitaxial Sr3Al2O6 Sacrificial Layers for Free‐Standing Oxides

  • Sallés, Pol
  • Caño, Iván
  • Guzmán, Roger
  • Dore, Camilla
  • Mihi, Agustín
  • Zhou, Wu
  • Coll, Mariona
The growth of epitaxial complex oxides has been essentially limited to specific substrates that can induce epitaxial growth and stand high temperature thermal treatments. These restrictions hinder the opportunity to manipulate and integrate such materials into new artificial heterostructures including the use of polymeric and silicon substrates and study emergent phenomena for novel applications. To tackle this bottleneck, herein, a facile chemical route to prepare water‐soluble epitaxial Sr3Al2O6 thin films to be used as sacrificial layer for future free‐standing epitaxial complex oxide manipulation is described. Two solution processes are put forward based on metal nitrate and metalorganic precursors to prepare dense, homogeneous and epitaxial Sr3Al2O6 thin films that can be easily etched by milli‐Q water. Moreover, as a proof of concept, a basic heterostructure consisting of Al2O3/Sr3Al2O6 on SrTiO3 is fabricated to subsequently exfoliate the Al2O3 thin film and transfer it to a polymer substrate. This is a robust chemical and low‐cost methodology that could be adopted to prepare a wide variety of thin films to fabricate artificial heterostructures to go beyond the traditional electronic, spintronic, and energy storage and conversion devices., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (“Severo Ochoa” Programme for Centres of Excellence in R&D FUNFUTURE CEX2019‐000917‐S and MAT2017‐83169‐R(AEI/FEDER, EU)). The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation LCF/BQ/DI19/11730026. M.C. acknowledges Becas Leonardo fundación BBVA. I.C. acknowledges the JAE Intro fellowship, JAEINT1901918. This work was done in the framework of the doctorate in material science of the Autonomous University of Barcelona. This work received financial support from the National Key R&D Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of GdxFeyOz films using an atomic layer deposition-type approach

  • Yu, Penmgei
  • Beer, Sebastian M. J.
  • Devi, Anjana
  • Coll, Mariona
The growth of complex oxide thin films with atomic precision offers bright prospects to study improved properties and novel functionalities. Here we tackle the fabrication of gadolinium iron oxide thin films by an atomic layer deposition-type approach in which iron and gadolinium tailor-made metalorganic precursors (bis(N-isopropyl ketoiminate)iron(II), [Fe(ipki)2] and tris(N,N′-diisopropyl-2-dimethylamido-guanidinato)gadolinium(III), [Gd(DPDMG)3]) are alternately reacted with ozone and deposited on silicon substrates at 250 °C. The structure, chemical composition and magnetic properties of the resulting films are compared with those obtained from a commercially available ferrocene precursor [Fe(Cp)2] and [Gd(DPDMG)3]. All films resulted in cation ratio close to nominal stoichiometry with negligible amount of organic species. The tailor-made metalorganic precursors, designed to provide similar thermal behavior, result in the formation of polycrystalline Gd3Fe5O12 films coexisting with GdFeO3, Gd2O3 and Fe2O3 whereas the combination of [Fe(Cp)2] and [Gd(DPDMG)3] mainly favors the formation of Gd3Fe5O12 films coexisting with traces of Gd2O3. This study demonstrates that this is a viable route to prepare complex GdxFeyOz films and could be used for the design of complex oxide films with improved properties upon rigorous study of the compatibility of metalorganic precursors., This work has been supported through the “Severo Ochoa” Programme for Centres of Excellence in R & D (CEX2019-000917-S), and MAT2017-83169-R from the Spanish Ministry of Economy and Competitiveness. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD)”, supported by COST (European Cooperation in Science and Technology). The authors gratefully thank the Scientific Services at ICMAB and G. Sauthier from ICN2 core support facilities for XPS analysis. This work has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. We also acknowledge financial support from China Scholarship Council fellowship to P. Yu (201606920073). The authors from RUB thank the DFG-DE-790-11-1 project for partly supporting this project. M. C. acknowledges Beca Leonardo from Fundación BBVA., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics, a Roadmap

  • Coll, Mariona|||0000-0001-5157-7764
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Althammer, Matthias
  • Bibes, Manuel|||0000-0002-6704-3422
  • Boschker, Hans
  • Calleja, Ana
  • Cheng, Guanglei
  • Cuoco, Mario|||0000-0002-7325-8331
  • Dittmann, Regina|||0000-0003-1886-1864
  • Dkhil, Brahim|||0000-0002-9862-625X
  • El Baggari, Ismail
  • Fanciulli, Marco|||0000-0003-2951-0859
  • Fina, Ignasi|||0000-0003-4182-6194
  • Fortunato, Elvira|||0000-0002-4202-7047
  • Frontera, Carlos|||0000-0002-0091-4756
  • Fujita, Shizuo
  • Garcia, Vincent|||0000-0002-7230-8130
  • Goennenwein, Sebastian T. B.
  • Granqvist, Claes Göran
  • Grollier, Julie
  • Gross, Rudolf|||0000-0003-4524-7552
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Hono, Kazuhiro|||0000-0001-7367-0193
  • Houwman, Evert|||0000-0003-2722-6045
  • Huijben, Mark|||0000-0001-8175-6958
  • Kalaboukhov, Aleksey
  • Keeble, David J.|||0000-0002-5378-799X
  • Koster, Gertjan
  • Kourkoutis, Lena Fitting|||0000-0002-1303-1362
  • Levy, Jeremy
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Driscoll, Judith|||0000-0003-4987-6620
  • Mannhart, Jochen|||0000-0001-6331-2640
  • Martins, Rodrigo|||0000-0002-1997-7669
  • Menzel, Stephan
  • Mikolajick, Thomas|||0000-0003-3814-0378
  • Napari, Mari|||0000-0003-2690-8343
  • Nguyen, Duc Minh
  • Niklasson, Gunnar A.|||0000-0002-8279-5163
  • Paillard, Charles|||0000-0002-3337-2295
  • Panigrahi, Shrabani|||0000-0003-2294-8348
  • Rijnders, Guus
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Sanna, Simone|||0000-0002-9206-9421
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Schroeder, Uwe|||0000-0002-6824-2386
  • Shen, Kyle M.
  • Siemon, Anne
  • Spreitzer, Matjaž
  • Sukegawa, Hiroaki|||0000-0002-4034-7848
  • Tamayo Buisán, Rubén
  • van den Brink, Jeroen P.
  • Pryds, Nini|||0000-0002-5718-7924
  • Miletto Granozio, Fabio|||0000-0002-9417-7848
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore's law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self-Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2-10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10 cm s at a temperature of 100 °C. Temperature-dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of AlO, which is known as a poor oxygen ion conductor within the analyzed temperature regime.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Yu, Pengmei
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Coll, Mariona|||0000-0001-5157-7764
  • Sort, Jordi|||0000-0003-1213-3639
Advances in nanotechnology require of robust methods to fabricate new types of nanostructured materials whose properties can be controlled at will using simple procedures. Nanoscale composites can benefit from actuation protocols that involve mutual interfacial interactions on the nanoscale. Herein, a method to create nanoscale composite thin films consisting of mesoporous cobalt ferrite (CFO) whose pore walls are nanocoated with HfO2 is presented. Porous CFO films are first prepared by sol-gel. Atomic layer deposition is subsequently used to conformally grow a HfO2 layer at the surface of the pore walls, throughout the thickness of the films. The magnetic properties of uncoated and HfO2-coated CFO mesoporous films are then modulated by applying external voltage, via magneto-ionic effects. The CFO-HfO2 composite films exhibit an enhanced magnetoelectric response. The magnetic moment at saturation of the composite increases 56% upon the application of -50 V (compared to 24% for CFO alone). Furthermore, dissimilar trends in coercivity are observed: after applying -50 V, the coercivity of the composite film increases by 69% while the coercivity of the CFO alone decreases by 25%. The effects can be reversed applying suitable positive voltages. This two-oxide nanocomposite material differs from archetypical magneto-ionic architectures, in which voltage-driven ion migration is induced between fully-metallic and oxide counterparts. The synthesized material is particularly appealing to develop new types of magnetoelectric devices with a highly tunable magnetic response.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing magneto-ionic effects in magnetic nanostructured films via conformal deposition of nanolayers with oxygen acceptor/donor capabilities

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Weschke, Eugen
  • Yu, Pengmei
  • Coll, Mariona|||0000-0001-5157-7764
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co-Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co-Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co-Pt film. Co-Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology.