Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrodeposited Ni-based magnetic mesoporous films as smart surfaces for atomic layer deposition: an 'all-chemical' deposition approach toward 3D nanoengineered composite layers

  • Zhang, Jin
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coll, Maria Dolors
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni and Cu-Ni (Cu₂₀Ni₈₀ and Cu₄₅Ni₅₅ in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu₂₀Ni₈₀ film with amorphous Al₂O₃, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Using evolved gas analysis-mass spectrometry to characterize adsorption on a nanoparticle surface

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura, Pere|||0000-0003-4964-1362
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
The surface chemistry of nanoparticles is the key factor to control and predict their interactions with molecules, ions, other particles, other materials, or substrates, determining key properties such as nanoparticle stability or biocompatibility. In consequence, the development of new techniques or modification of classical techniques to characterize nanoparticle surfaces is of utmost importance. Here, a classical analysis technique, thermally evolved gas analysis-mass spectrometry (EGA-MS), is employed to obtain an image of the nanoparticle-solvent interface, unraveling the molecules present on the surface. As the use of complementary techniques is urged, the validity of EGA-MS characterization is corroborated by comparison with a previously reported surface characterization method. Previous studies were based on several experimental techniques and MD simulations using YF nano/supraparticles and LaF nanoparticles as model systems. We demonstrate the applicability of this technique in two differently sized systems and two systems composed of the same ions on their surface but with a different inorganic core (e.g. LaF and YF nanoparticles). The results described in this paper agree well with our previous results combining experimental techniques and MD simulations. EGA-MS not only revealed the ions attached to the nanoparticle surface but also shed light on their coordination (e.g. citrate attached to one or two carboxylate moieties). Thus, we show that EGA-MS is a useful and efficient technique to characterize the surface chemistry of nanoparticles and to control and predict their final properties.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Yu, Pengmei
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Coll, Mariona|||0000-0001-5157-7764
  • Sort, Jordi|||0000-0003-1213-3639
Advances in nanotechnology require of robust methods to fabricate new types of nanostructured materials whose properties can be controlled at will using simple procedures. Nanoscale composites can benefit from actuation protocols that involve mutual interfacial interactions on the nanoscale. Herein, a method to create nanoscale composite thin films consisting of mesoporous cobalt ferrite (CFO) whose pore walls are nanocoated with HfO2 is presented. Porous CFO films are first prepared by sol-gel. Atomic layer deposition is subsequently used to conformally grow a HfO2 layer at the surface of the pore walls, throughout the thickness of the films. The magnetic properties of uncoated and HfO2-coated CFO mesoporous films are then modulated by applying external voltage, via magneto-ionic effects. The CFO-HfO2 composite films exhibit an enhanced magnetoelectric response. The magnetic moment at saturation of the composite increases 56% upon the application of -50 V (compared to 24% for CFO alone). Furthermore, dissimilar trends in coercivity are observed: after applying -50 V, the coercivity of the composite film increases by 69% while the coercivity of the CFO alone decreases by 25%. The effects can be reversed applying suitable positive voltages. This two-oxide nanocomposite material differs from archetypical magneto-ionic architectures, in which voltage-driven ion migration is induced between fully-metallic and oxide counterparts. The synthesized material is particularly appealing to develop new types of magnetoelectric devices with a highly tunable magnetic response.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing magneto-ionic effects in magnetic nanostructured films via conformal deposition of nanolayers with oxygen acceptor/donor capabilities

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Weschke, Eugen
  • Yu, Pengmei
  • Coll, Mariona|||0000-0001-5157-7764
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co-Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co-Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co-Pt film. Co-Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Banchewski, Juri|||0000-0002-6654-5527
  • Rasi, Silvia|||0000-0003-4935-3918
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Mocuta, C.|||0000-0001-5540-449X
  • Ricart, S.
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, P.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The achievement of high growth rates in YBaCuO epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s -1) and high critical current densities (5 MA cm -2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process. High throughput manufacturing of long length coated conductors requires fast epitaxial growth of high-temperature superconducting films. Here, Soler et al. report an ultrafast growth rates and high critical current densities of YBaCuO films using a transient liquid-assisted growth method.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High frequency response of thick REBCO coated conductors in the framework of the FCC study

  • Romanov, Artur
  • Krkotić, Patrick
  • Telles, Guilherme
  • O'Callaghan, Joan
  • Pont, Montse
  • Perez, Francis
  • Granados García, Xavier
  • Calatroni, Sergio
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Gutiérrez, Joffre
A thorough microwave response study of high temperature superconductors, considered as an alternative beam screen coating, has become integral in the design decisions for CERN's future research infrastructure. Here, we present the surface resistance of various (RE = rare earth) coated conductors available in large scale as a function of magnetic field in a broad temperature range measured by a Hakki-Coleman type resonator with resonant frequency . Analysis of the high frequency dissipation supported by DC transport characterization reveals the vortex dynamics in thick films. Determined microscopic vortex parameters span over a wide range of magnitudes and reflect the relevance of the superconducting layer's microstructure. We demonstrate that the depinning frequencies surpass , which confirms the operation in high performing, low dissipation pinning regime at measurement conditions. Surface impedance extrapolation to FCC-hh conditions points towards a significant outperformance of copper by coated conductors in terms of surface resistance. The surface resistance margins would open up potential ways for a more efficient frontier circular collider.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.