Skip to main content

PREPARATION OF FUNCTIONAL OXIDE THIN FILMS WITH ATOMIC-SCALE CONTROL BY LOW-COST CHEMICAL APPROACHES AND SOFT-LITHOGRAPHY

RYC-2013-12448

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, J.
  • Coll, Mariona
  • Puig Molina, Teresa
  • Pellicer, Eva
  • Sort, Jordi
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for application in magnetically actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others., This work has been partially funded by the 2014-SGR-1015 and 2014-SGR-150 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R and MAT2014-51778-C2-1-R projects from the Spanish Ministerio de Economı´a y Competitividad (MINECO) and associated FEDER, and the SPIN-PORICS 2014- Consolidator Grant from the European Research Council (Grant Agreement 648454). J. Z. is grateful to the China Scholarship Council (CSC) for the PhD grant. E. P. and M. C. are grateful to MINECO for the ‘‘Ramon y Cajal’’ contract (RYC-2012-10839, RYC-2013-12448). ICMAB acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing localized strain in solution-derived YBa2Cu3O7−δ nanocomposite thin films

  • Guzmán, Roger
  • Gázquez, Jaume
  • Mundet, Bernat
  • Coll, Mariona
  • Obradors, Xavier
  • Puig Molina, Teresa
Enhanced pinning due to nanoscale strain is unique to the high-Tc cuprates, where pairing may be modified with lattice distortion. Therefore a comprehensive understanding of the defect landscape is required for a broad range of applications. However, determining the type and distribution of defects and their associated strain constitutes a critical task, and for this aim, real-space techniques for atomic resolution characterization are necessary. Here, we use scanning transmission electron microscopy (STEM) to study the atomic structure of individual defects of solution-derived YBa2Cu3O7 (YBCO) nanocomposites, where the inclusion of incoherent secondary phase nanoparticles within the YBCO matrix dramatically increases the density of Y1Ba2Cu4O8 (Y124) intergrowths, the commonest defect in YBCO thin films. The formation of the Y124 is found to trigger a concatenation of strain-derived interactions with other defects and the concomitant nucleation of intrinsic defects, which weave a web of randomly distributed nanostrained regions that profoundly transform the vortex-pinning landscape of the YBCO nanocomposite thin films., Authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), European Research Council Advanced Grant Award ERC-2014-ADG-669504, and from the Catalan Government with 2014-SGR-753 and Xarmae. J.G. and M.C. acknowledge Ramon y Cajal Program (RyC-2012- 11709 and RYC-2013-12448, respectively). The microscopy work were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon - Universidad de Zaragoza (Zaragoza, Spain). Authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Untangling surface oxygen exchange effects in YBa2Cu3O6+x thin films by electrical conductivity relaxation

  • Cayado, Pablo
  • Sánchez Valdés, César Fidel
  • Stangl, Alexander
  • Coll, Mariona
  • Roura Grabulosa, Pere
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The kinetics of oxygen incorporation (in-diffusion process) and excorporation (out-diffusion process), in YBa2Cu3O6+x (YBCO) epitaxial thin films prepared using the chemical solution deposition (CSD) methodology by the trifluoroacetate route, was investigated by electrical conductivity relaxation measurements. We show that the oxygenation kinetics of YBCO films is limited by the surface exchange process of oxygen molecules prior to bulk diffusion into the films. The analysis of the temperature and oxygen partial pressure influence on the oxygenation kinetics has drawn a consistent picture of the oxygen surface exchange process enabling us to define the most likely rate determining step. We have also established a strategy to accelerate the oxygenation kinetics at low temperatures based on the catalytic influence of Ag coatings thus allowing us to decrease the oxygenation temperature in the YBCO thin films., The authors acknowledge the MICIN (NANOSELECT, CSD2007- 00041 and MAT2014-51778-C2-1-R and C2-2-R), Generalitat de Catalunya (2014SGR 753 and Xarmae), the EU (EU-FP7 NMP-LA- 2012-280432 EUROTAPES project, Cost Action MP1201) and ERC ADG-2014-669504. M. C. is grateful to the MINECO for the ‘‘Ramon y Cajal’’ contract RYC-2013-12448. We also acknowledge the MINECO for the Center of Excellence award Severo Ochoa (SEV-2015-0496). C. F. Sa´nchez-Valde´s acknowledges the support received from CSIC under JAE-Predoctorals program. We also acknowledge useful discussions with Dr S. Ricart, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrodeposited Ni-Based Magnetic Mesoporous Films as Smart Surfaces for Atomic Layer Deposition: An “All-Chemical” Deposition Approach toward 3D Nanoengineered Composite Layers

  • Zhang, Jin
  • Quintana, Alberto
  • Menéndez, Enric
  • Coll, Mariona
  • Pellicer, Eva
  • Sort, Jordi
Mesoporous Ni and Cu-Ni (Cu20Ni80 and Cu45Ni55 in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu20Ni80 film with amorphous Al2O3, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No 648454), the Spanish Government (Project MAT2017-86357-C3-1-R and associated FEDER) and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-292 and 2017-SGR-1519) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. E.P. and M. C. are grateful to MINECO for the “Ramón y Cajal” contract (RYC-2012-10839 and RYC-2013-12448)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self‐Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula
  • Hille, Pascal
  • Martí Sánchez, Sara
  • Mata, Maria de la
  • Coll, Mariona
  • Arbiol, Jordi
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2–10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO2 coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO2/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO2 based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10−16 cm2 s−1 at a temperature of 100 °C. Temperature‐dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of Al2O3, which is known as a poor oxygen ion conductor within the analyzed temperature regime., We thank Herbert Over from the Institute of Physical Chemistry at the JLU Giessen for sharing his knowledge and experience and helping improve the manuscript. Financial support was provided by the DFG via the GrK (Research training group) 2204 “Substitute Materials for sustainable Energy Technologies.” M.C. thanks Ramón y Cajal program RYC‐2013‐12448. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐ 2015‐0496) and MAT2017‐83169‐R AEI/FEDER,UE. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD),” supported by COST (European Cooperation in Science and Technology). S.M.S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa”’‐Severo Ochoa.” ICN2 members acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017‐85087‐C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV‐2013‐0295) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of this work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA‐Europe., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, Jin
  • Coll, Maria Dolors
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for applications like magnetically-actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrodeposited Ni-based magnetic mesoporous films as smart surfaces for atomic layer deposition: an 'all-chemical' deposition approach toward 3D nanoengineered composite layers

  • Zhang, Jin
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coll, Maria Dolors
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni and Cu-Ni (Cu₂₀Ni₈₀ and Cu₄₅Ni₅₅ in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu₂₀Ni₈₀ film with amorphous Al₂O₃, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Passivation layers for nanostructured photoanodes, Ultra-thin oxides on InGaN nanowires

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Schörmann, Jörg
  • Frank, A.
  • Reitz, C.
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Marschall, R.
  • Eickhoff, Martin
An experimental strategy for systematically assessing the influence of surface passivation layers on the photocatalytic properties of nanowire photoanodes by combining photocurrent analysis, photoluminescence spectroscopy and high resolution transmission electron microscopy with a systematic variation of sample structure and the surrounding electrolyte is demonstrated. Following this approach we can separate the impact on recombination and transport processes of photogenerated carriers. We apply this strategy to analyze the influence of ultra-thin TiO, CeO and AlO coatings deposited by atomic layer deposition on the photoelectrochemical performance of InGaN/GaN nanowire (NW) photoelectrodes. The passivation of surface states results in an increase of the anodic photocurrent (PC) by a factor of 2.5 for the deposition of 5 nm TiO. In contrast, the PC is reduced for CeO- and AlO-coated NWs due to enhanced defect recombination in the passivation layer or increased band discontinuities. Furthermore, photoelectrochemical oxidation of the InGaN/GaN NW photoelectrode is attenuated by the TiO layer and completely suppressed for a layer thickness of 7 nm or more. Due to efficient charge transfer from the InGaN NW core a stable TiO-covered photoanode with visible light excitation is realized.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self-Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2-10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10 cm s at a temperature of 100 °C. Temperature-dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of AlO, which is known as a poor oxygen ion conductor within the analyzed temperature regime.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Control of nanostructure and pinning properties in solution deposited YBaCuO nanocomposites with preformed perovskite nanoparticles

  • Li, Ziliang
  • Coll, Mariona|||0000-0001-5157-7764
  • Mundet, Bernat|||0000-0003-0608-2070
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Vallès, Ferran
  • Palau, Anna|||0000-0002-2217-164X
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Ricart, Susagna
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
Solution deposited YBaCuO (YBCO) nanocomposites with preformed nanoparticles represent a promising cost-effective approach for superior critical current properties under applied magnetic fields. Nonetheless, the majority of YBCO nanocomposites with high nanoparticle loads (>20%) suffer from nanoparticle coalescence and degraded superconducting properties. Here, we study the influence of nanoparticle concentration (0-25% mol), size (5 nm-10 nm) and composition (BaHfO, BaZrO) on the generation of structural defects in the epitaxial YBCO matrix, key parameter for vortex pinning. We demonstrate that flash-heated superconducting nanocomposites with 20 mol% preformed BaHfO or BaZrO perovskite secondary phases feature discrete and small (7 nm) nanoparticles and high density of YBaCuO (Y248) intergrowths. We identify a synergy between Y248 intergrowth density and small nanoparticles to increase artificial vortex pinning centers. Also, we validate the multideposition process to successfully increase film thickness of epitaxial nanocomposites with competitive critical currents I at 77 K.