Skip to main content

HERRAMIENTAS BASADAS EN INGENIERIA DE PROTEINAS PARA LA EDICION GENETICA Y TERAPIAS COMBINADAS

PID2022-137977OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre ASOCIACIÓN CENTRO DE INVESTIGACION COOP. BIOMATERIALES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Engineered Protein-Based Ionic Conductors for Sustainable Energy Storage Applications

  • Cortés-Ossa, Juan David
  • Blesio, Paolo
  • Fernandez-Castro, Marcial
  • Almonte, Lisa
  • Fernandez, Maxence
  • Liutkus, Mantas
  • Pandurangan, Perumal
  • Sabater, Carlos
  • Villaverde, Aitor
  • Melle-Franco, Manuel
  • Ashkenazy, Nurit
  • Jiménez-Ángeles, Felipe
  • Morant-Miñana, M. Carmen
  • Calvo, M. Reyes
  • Cortajarena, Aitziber L.
  • Sabater, Carlos|||/items/dde13588-5758-450f-b6c3-494d08459c4d
Protein-based biomaterials offer sustainable and biocompatible alternatives to traditional ionic conductors, essential for advancing green energy storage and bioelectronic applications. In this work, a robust, intrinsically self-assembling repeat protein scaffold to enhance ionic conductivity through the selective incorporation of glutamic acids is engineered. These mutations increase the number of available protonation sites and promote the formation of well-defined charge pathways. The self-assembly properties of the system enable the propagation of molecular-level modifications to the macroscopic scale, yielding self-standing protein films with significantly improved ionic conductivity. Specifically, engineered protein-based films exhibit an order of magnitude higher conductivity than their unmodified counterparts, with a further ten-fold enhancement through controlled addition of salt ions. Mechanistic analysis shows that the conductivity enhancement originates from the intertwined contributions of proton transport, hydration, and ion diffusion, all promoted by engineered charged residues. Finally, films of the best-performing variant are integrated, as both separator and electrolyte, into a supercapacitor device with competitive energy storage performance. These findings highlight the potential of rational protein design to create biocompatible, sustainable, and efficient ionic conductors with the stability and processability required to be successfully integrated into the next generation of energy storage and bioelectronic devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Tuning the Dimensionality of Protein–Peptide Coassemblies to Build 2D Conductive Nanomaterials

  • Perez-Chirinos, Laura
  • Almonte, Lisa
  • Cortés-Ossa, Juan David
  • Solano, Eduardo
  • Calvo, M. Reyes
  • Sasselli, Ivan R.
  • Cortajarena, Aitziber L.
The natural self-assembly tendency of proteins to build complex structural architectures has kindled inspiration in developing supramolecular structures through the rational design of biomacromolecules. While there has been significant progress in achieving precise control over the morphology of self-assembled structures, combining different molecules within assemblies enables the design of materials with increased complexity, sophisticated structures, and a broad spectrum of functionalities. Here, the development of 1D and 2D peptide–protein coassembled systems based on the design of amphiphilic peptides and engineered proteins is described. The peptide was optimized to form stable self-assembled fibers by evaluating, computationally and experimentally, the assembling tendencies and the supramolecular features of peptides with different lengths and negative charges. A superhelical repeat protein was engineered by fusing one or two amphiphilic peptides into one or both termini. This modification drove the coassembly between the self-assembled fibers and the protein with one or two peptides, resulting in 1D or 2D coassembled systems. The protein films and the 2D coassembled system exhibited high ionic conductivity for a biomolecular system, attributed to their high content of charged residues, positioning these materials as promising candidates for developing bioelectronic devices. Thus, this work provides a versatile framework for developing coassembled materials with tunable dimensionality by using biocompatible building blocks without any additional chemical moieties, highlighting the potential for their use in biocompatible electronics.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Statistical Analysis and Tokenization of Epitopes to Construct Artificial Neoepitope Libraries

  • López-Martínez, Elena
  • Manteca, Aitor
  • Ferruz, Noelia
  • Cortajarena, Aitziber L.
Epitopes are specific regions on an antigen’s surface that the immune system recognizes. Epitopes are usually protein regions on foreign immune-stimulating entities such as viruses and bacteria, and in some cases, endogenous proteins may act as antigens. Identifying epitopes is crucial for accelerating the development of vaccines and immunotherapies. However, mapping epitopes in pathogen proteomes is challenging using conventional methods. Screening artificial neoepitope libraries against antibodies can overcome this issue. Here, we applied conventional sequence analysis and methods inspired in natural language processing to reveal specific sequence patterns in the linear epitopes deposited in the Immune Epitope Database (www.iedb.org) that can serve as building blocks for the design of universal epitope libraries. Our results reveal that amino acid frequency in annotated linear epitopes differs from that in the human proteome. Aromatic residues are overrepresented, while the presence of cysteines is practically null in epitopes. Byte pair encoding tokenization shows high frequencies of tryptophan in tokens of 5, 6, and 7 amino acids, corroborating the findings of the conventional sequence analysis. These results can be applied to reduce the diversity of linear epitope libraries by orders of magnitude., A.M. is financed by grant 2022-FELL-000011-01 funded by Gipuzkoa Fellows Program (Diputación Foral de Gipuzkoa) and grant “EPINPOC” cofunded by AECT Euroregion New Aquitaine-Navarra-Basque Country. A.L.C. acknowledges financial support from Grants PID2019-111649RB-I00, PID-2022-137977OB-I00, and PDC2021-120957-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. A.L.C. also acknowledges financial support from Diputación Foral de Gipuzkoa grant 2023-QUAN-000023-01is financed by grant 2022-FELL-000011-01 funded by Gipuzkoa Fellows Program (Diputación Foral de Gipuzkoa) and grant “EPINPOC” cofunded by AECT Euroregion New Aquitaine-Navarra-Basque Country. A.L.C. acknowledges financial support from Grant PID2019-111649RB-I00 and Grant PDC2021-120957-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. N.F acknowledges financial support from grant RYC2021-034367-I funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering bio-brick protein scaffolds for organizing enzyme assemblies

  • Ledesma-Fernandez, Alba
  • Velasco-Lozano, Susana
  • Campos-Muelas, Pedro
  • Madrid, Ricardo
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
Enzyme scaffolding is an emerging approach for enhancing the catalytic efficiency of multi-enzymatic cascades by controlling their spatial organization and stoichiometry. This study introduces a novel family of engineered SCAffolding Bricks, named SCABs, utilizing the consensus tetratricopeptide repeat (CTPR) domain for organized multi-enzyme systems. Two SCAB systems are developed, one employing head-to-tail interactions with reversible covalent disulfide bonds, the other relying on non-covalent metal-driven assembly via engineered metal coordinating interfaces. Enzymes are directly fused to SCAB modules, triggering assembly in a non-reducing environment or by metal presence. A proof-of-concept with formate dehydrogenase (FDH) and L-alanine dehydrogenase (AlaDH) shows enhanced specific productivity by 3.6-fold compared to free enzymes, with the covalent stapling outperforming the metal-driven assembly. This enhancement likely stems from higher-order supramolecular assembly and improved NADH cofactor regeneration, resulting in more efficient cascades. This study underscores the potential of protein engineering to tailor scaffolds, leveraging supramolecular spatial-organizing tools, for more efficient enzymatic cascade reactions., We would like to thank the financial support provided by European Commission, Era-CoBioTech (Project ID: 61HOMBIOCAT) and by the Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00). A.L.C. acknowledges financial support by the Agencia Estatal de Investigación, Grants: PID2019-111649RB-I00, PID2022-137977OB-I00, and PCI2018-092984 funded by MCIN/AEI/10.13039/501100011033. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720 (CIC biomaGUNE). We thank Dr. J. Calvo for providing support with mass spectrometry and Dr. Irantzu Llanera for assisting with circular dichroism measurements at CIC biomaGUNE. Bioassays, acknowledges financial support from Era-CoBioTech (Project ID: 61 HOMBIOCAT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the dimensionality of protein-peptide coassemblies to build 2D conductive nanomaterials

  • Pérez-Chirinos, Laura
  • Almonte, Lisa
  • Cortés-Ossa, Juan David
  • Solano, Eduardo
  • Calvo, M. Reyes
  • Sasselli, Ivan R.
  • Cortajarena, Aitziber L.
The natural self-assembly tendency of proteins to build complex structural architectures has kindled inspiration in developing supramolecular structures through the rational design of biomacromolecules. While there has been significant progress in achieving precise control over the morphology of self-assembled structures, combining different molecules within assemblies enables the design of materials with increased complexity, sophisticated structures, and a broad spectrum of functionalities. Here, the development of 1D and 2D peptide-protein coassembled systems based on the design of amphiphilic peptides and engineered proteins is described. The peptide was optimized to form stable self-assembled fibers by evaluating, computationally and experimentally, the assembling tendencies and the supramolecular features of peptides with different lengths and negative charges. A superhelical repeat protein was engineered by fusing one or two amphiphilic peptides into one or both termini. This modification drove the coassembly between the self-assembled fibers and the protein with one or two peptides, resulting in 1D or 2D coassembled systems. The protein films and the 2D coassembled system exhibited high ionic conductivity for a biomolecular system, attributed to their high content of charged residues, positioning these materials as promising candidates for developing bioelectronic devices. Thus, this work provides a versatile framework for developing coassembled materials with tunable dimensionality by using biocompatible building blocks without any additional chemical moieties, highlighting the potential for their use in biocompatible electronics., L.P.-C. and A.L.C. acknowledge financial support from the Spanish State Training Subprogram (PRE2019-090076), and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720). A.L.C. acknowledges support by the Spanish State Research Agency (grants PID2022-137977OB-I00 funded by MCIN/AEI/10.13039/501100011033) and the European Research Council-Grant (ERC-CoG-ProNANO-648071). A.L.C., M.R.C., L.A., and J.D.C.-O. acknowledge the Union’s Horizon 2020 FET Open under grant agreement No. 964593 (eProt). A.L.C. and M.R.C. acknowledge the Spanish MCIN (TED2021-131641B-C41, TED2021–131641B-C43 grants) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. M.R.C. acknowledges the Spanish MCIN (CNS2023-14515) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.S. acknowledges Ramon y Cajal Program (RYC2021-033294-I), Spanish State Research Agency (PID2022-136392NA-I00), and Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). This work was performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 ministry of Science (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new route for the determination of protein structure and function

  • Mejias, Sara H.
  • Mincigrucci, R.
  • Beratto-Ramos, A.
  • Svetina, C.
  • Cortajarena, A. L.
  • Masciovecchio, C.
Understanding complex biological macromolecules, especially proteins, is vital for grasping their diverse chemical functions with direct impact on biology and pharmacology. Techniques such as x-ray crystallography and cryo-electron microscopy face limitations such as radiation damage and difficulties in crystallizing certain proteins. To address this, we present a strategic concept involving engineered protein scaffolds to create ordered arrays of proteins with controlled orientations, aiming at enhancing the signal at the detector. This innovative strategy opens avenues to solve the existing challenges for determining protein structures under physiological conditions. Moreover, it holds promise for studying conformational changes resulting from photoinduced changes, protein-drug, and/or protein-protein interactions. In the near future, our group will focus on showing the potential of the proposed strategy by combining molecular biology, protein self-assembly, and x-ray spectroscopy., S.H.M. acknowledges the funding from the Spanish Ministry of Science and Innovation (Project No. TED2021-131906A-I00) and her fellowship from the “La Caixa” Foundation (Grant No. ID 100010434). This project was also partially supported by the regional government of Madrid (Spain) through the Tecnologias 2024 program, Project MATRIX-CM (Grant No. TEC-2024/TEC-85) and by ayudas de atracción de Talento Investigador “César Nombela (Grant No. 2023-T2/ECO-28965). This project was also partially supported by the Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation (Grant No. LEO23-2-9635). The BBVA Foundation accepts no responsibility for the opinions, statements, and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (Grant No. CEX2020-001039-S). A.L.C. acknowledges support from the Spanish State Research Agency under Grant No. PID2022-137977OB-I00 funded by Grant No. MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-adaptive antifouling coatings from amphiphilic methacrylate-based copolymers: synthesis, characterization, and performance evaluation

  • Peña-Figueroa, Miriam
  • Saa, Laura
  • Cortajarena, Aitziber L.
  • Alvarez-Fernandez, Alberto
  • Verde-Sesto, Ester
  • Maestro, Armando
Data will be made available on request., Biofouling remains a persistent issue in biomedical applications such as tissue engineering, wound healing, and the use of medical devices. Developing antifouling coatings that can perform reliably on both hydrophilic and hydrophobic surfaces is a significant challenge. In this work, amphiphilic random copolymers composed of poly(ethylene glycol) methyl ether methacrylate and 2-acetoacetoxy ethyl methacrylate [P(OEGMA-co-AEMA)] were synthesized through controlled radical polymerization. These copolymers were deposited onto substrates using the Langmuir–Blodgett technique, enabling precise control over film formation at the air–water interface. Structural analysis using atomic force microscopy, ellipsometry, and adhesion force mapping showed that the copolymers self-assembled into nanostructured domains due to phase segregation between hydrophilic and hydrophobic segments. The orientation of these domains was influenced by the underlying substrate: OEGMA segments aligned toward hydrophilic surfaces, while AEMA segments oriented toward hydrophobic ones. This substrate-responsive organization led to uniform film coverage and distinct surface morphologies tailored to the surface chemistry. Bacterial adhesion assays demonstrated that the coatings significantly reduced fouling, achieving up to 80 % reduction in bacterial attachment on both types of substrates. The ability of these nanostructured films to adapt their configuration based on surface properties, while maintaining effective antifouling behavior, underscores their potential as broadly applicable surface coatings. These results support the development of versatile, high-performance antifouling materials suited to a wide range of biomedical environments., E.V-S thanks the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. A.M acknowledges support by PID2021-129054NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE; and from the Department of Education of the Basque Government under grant PIBA-2023-1-0054. . A.L.C. acknowledges support by the Spanish State Research Agency grant PID2022-137977OB-I00 funded by MCIN/AEI/ 10.13039/501100011033. A.A-F. is grateful for support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI /10.13039/501100011033 and FEDER, UE. E.V-S, A.M., A.L.C., A.A-F acknowledge support from the IKUR Strategy project, IKUR-Neutrionica 2025-2026, NEU6. NANOBIO grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Peptide electrostatic modulation directs human neural cell fate

  • Pérez-Chirinos, Laura
  • Barceló, Xavier
  • Chiariello, M. Gabriella
  • Sanz, Irene
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Ortega, J. Alberto
  • Marrink, Siewert J.
  • Cortajarena, Aitziber L.
  • Álvarez, Zaida
  • Sasselli, Ivan R.
The data that support the findings of this study are available from the corresponding author upon reasonable request., Supramolecular self-assembled systems have emerged as versatile platforms for engineering biomimetic environments that precisely regulate cellular behavior. These materials have tunable properties such as stiffness, hydrophobicity, and molecular composition, allowing for customization of their structure and function. Despite significant advances, the specific role of electrostatic properties in modulating cellular responses within supramolecular assemblies remains poorly understood. Here, a peptide library with diverse electrostatic profiles is designed to systematically investigate their influence on the bioactivity of supramolecular assemblies for neural regeneration. Combining computational and experimental methods, the self-assembly conditions of these peptides are optimized to create stable, biologically relevant architectures. Using human neural progenitor cell (hNPC) cultures, it is demonstrated that negatively charged environments enhance cell survival and promote neuronal differentiation. Specifically, high negative charges activate critical signaling pathways, including the mitogen-activated protein kinase (MAPK) cascade and cell adhesion mechanisms, leading to neuronal lineage commitment. This study establishes a novel framework for the design of supramolecular systems, offering an unprecedented ability to analyze specific parameters in cell behavior. By achieving control beyond conventional biomaterials, this work provides valuable insights into the complex interplay of biophysical and biochemical cues in the native neural microenvironment, with implications for regenerative medicine and biomaterial design., The authors acknowledge the support of the following grants: Grants PID2022-137977OB-I00 (A.L.C.), TED2021-131641B-C41 (A.L.C.), PID2020-114407RA-I00 (J.A.O.), PID2021-124839OA-I00 (Z.A.), and PID2022-136392NA-I00 (I.R.S.), funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU; Grants CNS2023-144820 (J.A.O.), CNS2022-135407 (Z.A.), funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR; Grant ERC-CoG-ProNANO-648071 (A.L.C.), funded by European Research Council; Grant 964593 (eProt) (A.L.C.), funded by European Union's Horizon 2020 FET Open; Grant R01AG086270 (Z.A. and J.A.O.), funded by the National Institute on Aging of the National Institutes of Health (NIH); and Grant P199 (Z.A.), supported by the IRP Research Foundation. The authors acknowledge the support of fellowships and research programs: the Spanish State Training Subprogram PRE2019-090076 (L.P.C.) and EMBO Scientific Exchange Grant 10283 (L.P.C.), and Juan de la Cierva Program JDC2023-051798-I (X.B.) funded by MICIU/AEI/10.13039/501100011033 and “ESF+.” The authors acknowledge support from the Ramón y Cajal Program, RYC2020-028732-I (Z.A.), RYC2021-033294-I (I.R.S.), and RYC2019-026980-I (J.A.O.), and I.R.S. also acknowledges funding from the Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). The authors also thank the IBEC Core Facility and Microscopy Characterization Facility, Unit 7 of ICTS “NANBIOSIS” from CIBER-BBN both at Institute for Bioengineering of Catalonia. Computational work was carried out at the HPC Clusters at the Donostia International Physics Center (DIPC). Mass spectrometry/Proteomics was performed at the IRB Barcelona Mass Spectrometry and Proteomics Core Facility, which is granted in the framework of the 2014-2020 ERDF Operational Programme in Catalonia, co-financed by the European Regional Development Fund (ERDF). Reference: IU16-015983. Institutional support was provided by Institute of Neurosciences—University of Barcelona as well as CIC biomaGUNE and IBEC which acknowledge the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720) and the Centro de Excelencia Severo Ochoa (Grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/501100011033), respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001282-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cardiac fibrosis inhibitor CTPR390 prevents structural and morphological changes in human engineered cardiac connective tissue

  • Maestro, David
  • Palanca, Ana R.
  • Soto, Helena
  • Llanera, I.
  • DeGrave, Alisa Nicole
  • Guedes, Gabriela
  • Oliveira, Guilherme Henrique de
  • Coelho Conceição, André Luiz
  • Mieites, Verónica
  • Icardo, Jose M.
  • Sánchez-Cano, Carlos
  • Conde, Olga M.
  • Lutz, Susanne
  • Cortajarena, Aitziber L.
  • Villar Ramos, Ana V.
Cardiac fibrosis is a key characteristic of heart failure. CTPR390, an experimental anti-fibrotic inhibitor targeting Hsp90, has shown success in animal models, but remains unexplored in human cardiac models. This study evaluated an engineered cardiac connective tissue (ECCT) model, focusing on changes in the extracellular matrix and fibroblasts. Results showed that CTPR390 prevented architectural changes in TGFβ1-activated ECCT, preserving tissue perimeter, collagen fibers alignment while reducing structured areas and degree of collagen structuration. CTPR390 treatment reduced cell area of fibroblasts under tension, without changes in the internal rounded cells devoid of tension. Fibroblast recruitment to tension areas was diminished, showing biomechanical behavior similar to control ECCT. This treatment also lowered the gene and protein expression of key pro-fibrotic markers. Here, advanced biotechnology was employed to detect the detailed structure of tissue fibrosis reduction after administering CTPR390, representing a significant advancement toward clinical application for cardiac fibrosis treatment., This work was partially supported by Agencia Estatal de Investigación (AEI/MCI/10.13039/501100011033), Spain. A.V.V. PID2021-125702OB-I00. Fomento de la transferencia de conocimiento en la Comunidad Autónoma de Cantabria SUBVTC-2023-0006 T. A.L.C. acknowledges support by the Agencia Estatal de Investigación Grant PDC2021-120957-I00-NanoIVD and PDC2022-133345-I00-ProIMAGE funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and Grant PID2022-137977OB-I00-ProTher funded by MCIN/AEI/ 10.13039/501100011033. C.S.C. thanks Gipuzkoa Foru Aldundia (Gipuzkoa Fellows program) Grant number 2019-FELL-000018-01/62/2019 for financial support. G.G. thanks the financial support of “la Caixa” Foundation (ID100010434, fellowship: LCF/BQ/DI20/11780020). This work was performed under the Maria de Maeztu Units of Excellence and Severo Ochoa Centers Programs from the Spanish State Research Agency – Grants No. MDM-2017-0720 (CIC biomaGUNE) and CEX2018-000867-S (DIPC). O.M.C. and V.M. thank the AEI for the infrastructure EQC 2019-006589-P and the PREVAL 21/07 grant from IDIVAL., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2018-000867-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineering bio-brick protein scaffolds for organizing enzyme assemblies

  • Ledesma-Fernandez, Alba
  • Velasco-Lozano, Susana
  • Campos-Muelas, Pedro
  • Madrid, Ricardo
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
Enzyme scaffolding is an emerging approach for enhancing the catalytic efficiency of multi‐enzymatic cascades by controlling their spatial organization and stoichiometry. This study introduces a novel family of engineered SCAffolding Bricks, named SCABs, utilizing the consensus tetratricopeptide repeat (CTPR) domain for organized multi‐enzyme systems. Two SCAB systems are developed, one employing head‐to‐tail interactions with reversible covalent disulfide bonds, the other relying on non‐covalent metal‐driven assembly via engineered metal coordinating interfaces. Enzymes are directly fused to SCAB modules, triggering assembly in a non‐reducing environment or by metal presence. A proof‐of‐concept with formate dehydrogenase (FDH) and L‐alanine dehydrogenase (AlaDH) shows enhanced specific productivity by 3.6‐fold compared to free enzymes, with the covalent stapling outperforming the metal‐driven assembly. This enhancement likely stems from higher‐order supramolecular assembly and improved NADH cofactor regeneration, resulting in more efficient cascades. This study underscores the potential of protein engineering to tailor scaffolds, leveraging supramolecular spatial‐organizing tools, for more efficient enzymatic cascade reactions.