Skip to main content

BIOFUNCTIONAL NANOMATERIALS- II

PRE2019-090076

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre ASOCIACIÓN CENTRO DE INVESTIGACION COOP. BIOMATERIALES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tips and tricks in the modeling of supramolecular peptide assemblies

  • Piskorz, Tomasz K.
  • Pérez-Chirinos, Laura
  • Qiao, Baofu
  • Sasselli, Ivan R.
Supramolecular peptide assemblies (SPAs) hold promise as materials for nanotechnology and biomedicine. Although their investigation often entails adapting experimental techniques from their protein counterparts, SPAs are fundamentally distinct from proteins, posing unique challenges for their study. Computational methods have emerged as indispensable tools for gaining deeper insights into SPA structures at the molecular level, surpassing the limitations of experimental techniques, and as screening tools to reduce the experimental search space. However, computational studies have grappled with issues stemming from the absence of standardized procedures and relevant crystal structures. Fundamental disparities between SPAs and protein simulations, such as the absence of experimentally validated initial structures and the importance of the simulation size, number of molecules, and concentration, have compounded these challenges. Understanding the roles of various parameters and the capabilities of different models and simulation setups remains an ongoing endeavor. In this review, we aim to provide readers with guidance on the parameters to consider when conducting SPA simulations, elucidating their potential impact on outcomes and validity., I.R.S. acknowledges financial support from Ramon y Cajal Program (RYC2021-033294-I), and Spanish State Research Agency (PID2022-136392NA-I00). B.Q. is thankful for the support from the National Science Foundation (2328095). L.P.-C. acknowledges financial support from the Spanish State Training Subprogram (PRE2019-090076) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the dimensionality of protein-peptide coassemblies to build 2D conductive nanomaterials

  • Pérez-Chirinos, Laura
  • Almonte, Lisa
  • Cortés-Ossa, Juan David
  • Solano, Eduardo
  • Calvo, M. Reyes
  • Sasselli, Ivan R.
  • Cortajarena, Aitziber L.
The natural self-assembly tendency of proteins to build complex structural architectures has kindled inspiration in developing supramolecular structures through the rational design of biomacromolecules. While there has been significant progress in achieving precise control over the morphology of self-assembled structures, combining different molecules within assemblies enables the design of materials with increased complexity, sophisticated structures, and a broad spectrum of functionalities. Here, the development of 1D and 2D peptide-protein coassembled systems based on the design of amphiphilic peptides and engineered proteins is described. The peptide was optimized to form stable self-assembled fibers by evaluating, computationally and experimentally, the assembling tendencies and the supramolecular features of peptides with different lengths and negative charges. A superhelical repeat protein was engineered by fusing one or two amphiphilic peptides into one or both termini. This modification drove the coassembly between the self-assembled fibers and the protein with one or two peptides, resulting in 1D or 2D coassembled systems. The protein films and the 2D coassembled system exhibited high ionic conductivity for a biomolecular system, attributed to their high content of charged residues, positioning these materials as promising candidates for developing bioelectronic devices. Thus, this work provides a versatile framework for developing coassembled materials with tunable dimensionality by using biocompatible building blocks without any additional chemical moieties, highlighting the potential for their use in biocompatible electronics., L.P.-C. and A.L.C. acknowledge financial support from the Spanish State Training Subprogram (PRE2019-090076), and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720). A.L.C. acknowledges support by the Spanish State Research Agency (grants PID2022-137977OB-I00 funded by MCIN/AEI/10.13039/501100011033) and the European Research Council-Grant (ERC-CoG-ProNANO-648071). A.L.C., M.R.C., L.A., and J.D.C.-O. acknowledge the Union’s Horizon 2020 FET Open under grant agreement No. 964593 (eProt). A.L.C. and M.R.C. acknowledge the Spanish MCIN (TED2021-131641B-C41, TED2021–131641B-C43 grants) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. M.R.C. acknowledges the Spanish MCIN (CNS2023-14515) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.S. acknowledges Ramon y Cajal Program (RYC2021-033294-I), Spanish State Research Agency (PID2022-136392NA-I00), and Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). This work was performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 ministry of Science (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Peptide electrostatic modulation directs human neural cell fate

  • Pérez-Chirinos, Laura
  • Barceló, Xavier
  • Chiariello, M. Gabriella
  • Sanz, Irene
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Ortega, J. Alberto
  • Marrink, Siewert J.
  • Cortajarena, Aitziber L.
  • Álvarez, Zaida
  • Sasselli, Ivan R.
The data that support the findings of this study are available from the corresponding author upon reasonable request., Supramolecular self-assembled systems have emerged as versatile platforms for engineering biomimetic environments that precisely regulate cellular behavior. These materials have tunable properties such as stiffness, hydrophobicity, and molecular composition, allowing for customization of their structure and function. Despite significant advances, the specific role of electrostatic properties in modulating cellular responses within supramolecular assemblies remains poorly understood. Here, a peptide library with diverse electrostatic profiles is designed to systematically investigate their influence on the bioactivity of supramolecular assemblies for neural regeneration. Combining computational and experimental methods, the self-assembly conditions of these peptides are optimized to create stable, biologically relevant architectures. Using human neural progenitor cell (hNPC) cultures, it is demonstrated that negatively charged environments enhance cell survival and promote neuronal differentiation. Specifically, high negative charges activate critical signaling pathways, including the mitogen-activated protein kinase (MAPK) cascade and cell adhesion mechanisms, leading to neuronal lineage commitment. This study establishes a novel framework for the design of supramolecular systems, offering an unprecedented ability to analyze specific parameters in cell behavior. By achieving control beyond conventional biomaterials, this work provides valuable insights into the complex interplay of biophysical and biochemical cues in the native neural microenvironment, with implications for regenerative medicine and biomaterial design., The authors acknowledge the support of the following grants: Grants PID2022-137977OB-I00 (A.L.C.), TED2021-131641B-C41 (A.L.C.), PID2020-114407RA-I00 (J.A.O.), PID2021-124839OA-I00 (Z.A.), and PID2022-136392NA-I00 (I.R.S.), funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU; Grants CNS2023-144820 (J.A.O.), CNS2022-135407 (Z.A.), funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR; Grant ERC-CoG-ProNANO-648071 (A.L.C.), funded by European Research Council; Grant 964593 (eProt) (A.L.C.), funded by European Union's Horizon 2020 FET Open; Grant R01AG086270 (Z.A. and J.A.O.), funded by the National Institute on Aging of the National Institutes of Health (NIH); and Grant P199 (Z.A.), supported by the IRP Research Foundation. The authors acknowledge the support of fellowships and research programs: the Spanish State Training Subprogram PRE2019-090076 (L.P.C.) and EMBO Scientific Exchange Grant 10283 (L.P.C.), and Juan de la Cierva Program JDC2023-051798-I (X.B.) funded by MICIU/AEI/10.13039/501100011033 and “ESF+.” The authors acknowledge support from the Ramón y Cajal Program, RYC2020-028732-I (Z.A.), RYC2021-033294-I (I.R.S.), and RYC2019-026980-I (J.A.O.), and I.R.S. also acknowledges funding from the Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). The authors also thank the IBEC Core Facility and Microscopy Characterization Facility, Unit 7 of ICTS “NANBIOSIS” from CIBER-BBN both at Institute for Bioengineering of Catalonia. Computational work was carried out at the HPC Clusters at the Donostia International Physics Center (DIPC). Mass spectrometry/Proteomics was performed at the IRB Barcelona Mass Spectrometry and Proteomics Core Facility, which is granted in the framework of the 2014-2020 ERDF Operational Programme in Catalonia, co-financed by the European Regional Development Fund (ERDF). Reference: IU16-015983. Institutional support was provided by Institute of Neurosciences—University of Barcelona as well as CIC biomaGUNE and IBEC which acknowledge the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720) and the Centro de Excelencia Severo Ochoa (Grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/501100011033), respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001282-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Tuning the dimensionality of supramolecular functional materials based on the rational design of biomolecules, Modulando la dimensionalidad de materiales supramoleculares funcionales mediante el diseño racional de biomoléculas

  • Pérez-Chirinos, Laura
For the Degree of Doctor in Molecular Biology and Biomedicine at the University of the Basque Country., [ES] El autoensamblaje es un proceso natural y espontáneo que ocurre tanto en sistemas biológicos como no biológicos con el fin de formar estructuras complejas con alto nivel de organización. Las proteínas son uno de los principales ejemplos de moléculas biológicas que forman estructuras supramoleculares arquitectónicamente complejas a partir del autoensamblaje de moléculas individuales. Este proceso natural ha servido como inspiración para el desarrollo de estructuras supramoleculares mediante el diseño racional de biomacromoléculas con dicha capacidad de autoensamblaje. A pesar del alto control y conocimiento que existe sobre la morfología de las estructuras autoensambladas, la combinación de diferentes moléculas en los ensamblajes abre nuevas oportunidades para el desarrollo de materiales con una complejidad y versatilidad que no es posible adquirir en simples autoensamblajes. En este sentido, las estructuras supramoleculares coensambladas ofrecen unas ventajas excepcionales para el desarrollo de estructuras novedosas y complejas con un amplio espectro de posibles aplicaciones innovadoras. El desarrollo de estructuras supramoleculares mediante el diseño de secuencias peptídicas anfifílicas con capacidad de autoensamblaje es un tema de investigación ampliamente estudiado. La capacidad de controlar la estructura de estas moléculas permite el desarrollo de nanoestructuras supramoleculares con propiedades específicas y modificables. Actualmente hay distintas líneas de investigación centradas en este tipo de sistemas. Desde el punto de vista estructural, la predicción de la morfología y la topología de estas estructuras supramoleculares como resultado del diseño racional de secuencias moleculares sigue siendo un campo de investigación amplio y desafiante. Desde el punto de vista de la aplicación, se ha demostrado que estos sistemas tienen excepcionales propiedades como materiales bioactivos para su uso como matrices artificiales extracelulares en cultivos celulares e ingeniería de tejidos cuando se combinan con secuencias peptídicas bioactivas, donde las propiedades físicas y mecánicas de la parte estructural también juegan un papel fundamental. Además, se ha demostrado que estas estructuras supramoleculares presentan propiedades conductoras gracias a la presencia de residuos cargados y la deslocalización de electrones en residuos aromáticos apilados mediante interacciones π-π, posicionando a estos materiales como potenciales candidatos para la bioelectrónica. Las proteínas de repetición son excelentes candidatos para el diseño de estructuras robustas por sus características modulares que permiten la modificación de tamaño y morfología de estas moléculas según las necesidades. La familia de las proteínas tetratricopeptide repeat (TPR), incluye proteínas que se basan en un bloque estructural de repetición constituido por 34 aminoácidos que forman un motivo de repetición con una estructura de hélice alfa-hélice-hélice alfa. La repetición en tándem de estos bloques individuales forma proteínas de mayor tamaño con una estructura de superhélice. Mediante el análisis estadístico de todas las secuencias naturales de proteínas TPR, se diseñó la secuencia consenso (CTPR). De este análisis se observó que hay 8 aminoácidos por cada bloque individual de 34 aminoácidos que se mantienen altamente conservados entre todas las secuencias naturales, los cuales son responsables de mantener la estructura superhelicoidal característica de la familia de las proteínas TPR, mediante su participación en interacciones de empaquetamiento entre repeticiones. Como resultado de su modularidad, estas proteínas presentan propiedades intrínsecas de autoensamblaje mediante interacciones “cabeza – cola” y “lado – a – lado” entre las proteínas. Dicha modularidad junto con la tendencia de autoensamblaje han dado lugar al desarrollo de materiales basados en proteínas con una morfología y anisotropía específicas. Además, estos materiales han presentado propiedades conductoras incipientes, convirtiéndolos en candidatos prometedores para el desarrollo de materiales bioelectrónicos, entre otras aplicaciones. El objetivo principal presentado en esta tesis es el desarrollo de nanomateriales híbridos con dimensionalidades regulables basados en el coensamblaje de péptidos anfifílicos diseñados racionalmente, y proteínas modificadas para aplicaciones en bioelectrónica y cultivos celulares. El diseño de estos materiales híbridos se basa en el coensamblaje entre fibras peptídicas autoensambladas y proteínas CTPR con uno o dos péptidos fusionados a uno o ambos extremos terminales. El coensamblaje entre las fibras y la proteína CTPR fusionada a un péptido está diseñado para formar nanofibras híbridas unidimensionales (1D), mientras que el coensamblaje entre las fibras y la proteína CTPR fusionada a dos péptidos está diseñado para formar una malla híbrida bidimensional (2D). Esta tesis está dividida en cinco capítulos, presentando una visión general en el primer capítulo, el diseño racional de péptidos y proteínas en el segundo y tercer capítulos, el diseño y caracterización de los materiales híbridos en el cuarto capítulo, y el estudio de las propiedades conductoras y bioactivas de los diferentes sistemas en el quinto capítulo., [EN] Self-assembly is a natural, spontaneous process that appears in many biological and non-biological systems to form sophisticated, organized structures. Proteins are one of the primary examples of biological molecules that build supramolecular systems by self-assembling their individual molecules to obtain complex structural architectures. This natural process kindled inspiration in the development of supramolecular structures through the rational design of biomacromolecules. In spite of the high control over the morphology of self-assembled structures, the combination of different molecules within assemblies opens up new opportunities for the development of materials with increased complexity and versatility. In this sense, co-assembled supramolecular structures offer a challenging and compelling avenue for the design of novel, sophisticated structures with a broad spectrum of innovative functionalities. The design of amphiphile peptidic sequences that self-assemble into supramolecular structures has been thoroughly reported in the literature. The high control over the structure of these molecules permits the development of supramolecular nanostructures with precise and tunable properties and functions. The ongoing research involving these structures is focused on different research lines. From the structural point of view, predicting the morphology and topology of the supramolecular structures resulting from the design of the molecular sequences is still a challenging endeavor. From the application point of view, these structures have exhibited exceptional bioactive properties as artificial extracellular matrices for cell culture and tissue engineering when combined with bioactive peptide sequences, in which the physical and mechanical properties of the structural part also play a fundamental role. Additionally, these structures have demonstrated compelling conductive properties due to the presence of charged residues and the delocalization of electrons in π-stacked aromatic residues, positioning them as promising materials for bioelectronics. Repeat proteins are outstanding candidates for the design of robust protein scaffolds due to their modular features that allow their versatile tunability in size and morphology. The tetratricopeptide repeat (TPR) protein family encloses proteins that are based on a 34 amino acid helix-turn-helix structural building block that can be repeated in tandem arrays to form larger proteins with a superhelical fold. The consensus TPR sequence (CTPR) was designed based on the statistical analysis of natural TPR sequences. This analysis revealed that 8 residues within the 34 motif sequence were highly conserved among the natural TPR proteins. These residues are known to be responsible for preserving the superhelical TPR fold through their involvement in inter- and intra- repeat packing interactions. As a result of their modularity, CTPR proteins exhibit inherent self-assembling properties driven by “head-to-tail” and “side-to-side” interactions. This modularity and self-assembling properties have permitted the development of protein-based materials with controlled morphology and anisotropy. Moreover, these materials have also presented incipient conductive properties, making them promising candidates for the development of bioelectronic materials, among other applications. The main objective presented in this thesis is the development of hybrid nanomaterials with tunable dimensionalities based on the co-assembly of rationally designed amphiphilic peptides and engineered proteins for applications in bioelectronics and cell culture. The design of these hybrid materials is based on the co-assembly between self-assembled peptide fibers and CTPR proteins with one or two peptides fused to one or both termini of the proteins. The co-assembly between the fibers and the CTPR protein linked to one peptide is designed to form 1D hybrid nanofibers, whereas the co-assembly between fibers and the CTPR protein linked to two peptides is designed to form a 2D hybrid mesh. This thesis is divided into five chapters, presenting an overall overview in the first chapter, the peptide and protein rational design in the second and third chapters, the design and characterization of the hybrid materials in the fourth chapter, and the study of the conductive and bioactive properties of the different systems in the fifth chapter., The work presented in this thesis was funded by the Spanish State Training Subprogram PRE2019-090076, by the European Research Council ERC CoG-ProNANO-648071 Consolidator Grant, by the European Commission H2020 FET-OPEN 01-2018-2019-2020 project, by the EMBO Scientific Exchange Grant 10283 and performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 Ministry of Science, Innovation and Universities., Peer reviewed