Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Engineered Repeat Protein Hybrids: The New Horizon for Biologic Medicines and Diagnostic Tools

  • Belloso Uribe, Kepa
  • Guisasola, Eduardo
  • Aires, Antonio
  • López Martínez, Elena
  • Guedes, Gabriela
  • Sasselli, Ivan R.
  • López Cortajarena, Aitziber
The last decades have witnessed unprecedented scientific breakthroughs in all the fields of knowledge, from basic sciences to translational research, resulting in the drastic improvement of the lifespan and overall quality of life. However, despite these great advances, the treatment and diagnosis of some diseases remain a challenge. Inspired by nature, scientists have been exploring biomolecules and their derivatives as novel therapeutic/diagnostic agents. Among biomolecules, proteins raise much interest due to their high versatility, biocompatibility, and biodegradability. Protein binders (binders) are proteins that bind other proteins, in certain cases, inhibiting or modulating their action. Given their therapeutic potential, binders are emerging as the next generation of biopharmaceuticals. The most well-known example of binders are antibodies, and inspired by them researchers have developed alternative binders using protein design approaches. Protein design can be based on naturally occurring proteins in which, by means of rational design or combinatorial approaches, new binding interfaces can be engineered to obtain specific functions or based on de novo proteins emerging from state-of-the-art computational methodologies. Among the novel designed proteins, a class of engineered repeat proteins, the consensus tetratricopeptide repeat (CTPR) proteins, stand out due to their stability and robustness. The CTPR unit is a helix-turn-helix motif constituted of 34 amino acids, of which only 8 are essential to ensure correct folding of the structure. The small number of conserved residues of CTPR proteins leaves plenty of freedom for functional mutations, making them a base scaffold that can be easily and reproducibly tailored to endow desired functions to the protein. For example, the introduction of metal-binding residues (e.g., histidines, cysteines) drives the coordination of metal ions and the subsequent formation of nanomaterials. Additionally, the CTPR unit can be conjugated with other peptides/proteins or repeated in tandem to encode larger CTPR proteins with superhelical structures. These properties allow for the design of both binder and nanomaterial-coordination modules as well as their combination within the same molecule, making the CTPR proteins, as we have demonstrated in several recent examples, the ideal platform to develop protein–nanomaterial hybrids. Generally, the fusion of two distinct materials exploits the best properties of each; however, in protein–nanomaterial hybrids, the fusion takes on a new dimension as new properties arise. These hybrids have ushered the use of protein-based nanomaterials as biopharmaceuticals beyond their original therapeutic scope and paved the way for their use as theranostic agents. Despite several reports of protein-stabilized nanomaterials found in the literature, these systems offer limited control in the synthesis and properties of the grown nanomaterials, as the protein acts just as a stabilizing agent with no significant functional contribution. Therefore, the rational design of protein-based nanomaterials as true theranostic agents is still incipient. In this context, CTPR proteins have emerged as promising scaffolds to hold simultaneously therapeutic and diagnostic functions through protein engineering, as it has been recently demonstrated in pioneering in vitro and in vivo examples., A.L.C. acknowledges support by the European Research Council ERC-CoG-648071-ProNANO and ERC-PoC- 841063-NIMM; Spanish State Research Agency (PID2019- 111649RB-I00); and the Basque Government (RIS3- 2019222005). I.R.S. acknowledges financial support from Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputacion Foral de Gipuzkoa: 2019-FELL-000017-01). G.G. acknowledges the financial support of “la Caixa” Foundation (ID100010434, fellowship: LCF/BQ/DI20/11780020). E.L.- M. thanks the Spanish Ministry of Science and Innovation for the FPI grant (BES-2017-079646). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency − Grant No. MDM-2017- 0720 (CIC biomaGUNE).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

An Emerging Nanozyme Class for à la carte Enzymatic-Like Activities based on Protein-Metal Nanocluster Hybrids

  • López Domene, Rocío
  • Vázquez Díaz, Silvia
  • Modin, Evgenii
  • Beloqui Elizazu, Ana
  • López Cortajarena, Aitziber
In this study, the goal is to fabricate robust and highly efficient peroxidase-like nanozymes that can ultimately be assembled into films for their easy reuse in catalytic cycles. Nanozymes are designed by mimicking the strategy adopted by metalloproteins to accommodate metal cofactors within their protein structure. The engineered consensus tetratricopeptide repeat (CTPR) protein module is selected as the scaffold to guide the growth and the stabilization of a library of in situ synthesized metal nanoclusters. A deep investigation of the interplay between the composition and function of the nanozymes reveals the impact of the protein templates and nanocluster composition on the peroxidase-like activity of the hybrids. Moreover, among a total of 24 hybrids, a top-performing nanozyme results from the growth of Au/Pt bimetallic nanoclusters on a CTPR protein with engineered histidine coordination sites. These nanozymes exhibit improved thermostability and resistance to hydrogen peroxide compared to natural peroxidases like horseradish peroxidase. Finally, it shows the easy fabrication of nanozyme composite films guided throughout the intrinsic self-assembling properties of the CTPR scaffold. These heterogeneous solid materials are reused in several reaction cycles without significant loss of the catalytic performance, proving these protein-templated nanozymes as an advantageous alternative to natural enzymes., The authors thank Gabriela Guedes, Andoni Rodriguez, and Alessandro Silvestri for their inestimable help in the characterization of the nanozymes. The authors thank Dr. D. di Silvio at CIC biomaGUNE for support with the acquisition and analysis of XPS data. A.L.C. acknowledges support by the Agencia Estatal de Investigación Grants: PID2019-111649RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and Grant PDC2021-120957-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. A.L.C. acknowledges support by the European Research Council Grants: ERC-CoG-648071-ProNANO and ERC-PoC-841063- NIMM. This work was performed under the Maria de Maeztu Units of Excellence Program from Q5 the Spanish State Research Agency grant no. MDM-2017-0720. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (PID2019-110239RB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by the “European Union NextGenerationEU/PRTR”; RYC2018-025923-I from RyC program – MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”), BBVA Foundation – IN[21]_CBB_QUI_0086, and UPV/EHU- GIU21-033).
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Engineering conductive protein films through nanoscale self-assembly and gold nanoparticles doping

  • Mejias, Sara H.
  • López-Martínez, Elena
  • Fernandez, Maxence
  • Couleaud, Pierre
  • Martin-Lasanta, Ana
  • Romera, David
  • Sanchez-Iglesias, Ana
  • Casado, Santiago
  • Osorio, Manuel R.
  • Abad, Jose M.
  • González, M. Teresa
  • Cortajarena, Aitziber L.
Protein-based materials are usually considered as insulators, although conductivity has been recently shown in proteins. This fact opens the door to develop new biocompatible conductive materials. While there are emerging efforts in this area, there is an open challenge related to the limited conductivity of protein-based systems. This work shows a novel approach to tune the charge transport properties of protein-based materials by using electron-dense AuNPs. Two strategies are combined in a unique way to generate the conductive solid films: (1) the controlled self-assembly of a protein building block; (2) the templating of AuNPs by the engineered building block. This bottom-up approach allows controlling the structure of the films and the distribution of the AuNPs within, leading to enhanced conductivity. This work illustrates a promising strategy for the development of effective hybrid protein-based bioelectrical materials, This work was partially supported by the European Research Council ERC-CoG-648071-ProNANO, ERC-PoC-841063-NIMM, Agencia Estatal de Investigación, Spain (PID2019- 111649RB-I00; and MAT2017-88693-R), and the Basque Government (Elkartek KK-2017/00008), E.L-M thanks the Spanish Ministry of Science and Innovation for the FPI grant (BES-2017-079646). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 (CIC biomaGUNE) and SEV-2016-0686 (IMDEA Nanociencia)
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Repeat proteins as versatile scaffolds for arrays of redox-active FeS clusters

  • Bahrami-Dizicheh Z.
  • Liutkus M.
  • Sommer D.J.
  • Astashkin A.
  • Kodis G.
  • Ghirlanda G.
  • Cortajarena A.L.
  • Mejías, Sara H.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Protein-directed crystalline 2D fullerene assemblies

  • Liutkus M.
  • López-Andarias A.
  • López-Andarias J.
  • Gil-Carton D.
  • Feixas F.
  • Osuna S.
  • Matsuda W.
  • Sakurai T.
  • Seki S.
  • Atienza C.
  • Martín, Nazario
  • Cortajarena A.L.
  • Mejías, Sara H.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Engineering conductive protein films through nanoscale self-assembly and gold nanoparticles doping

  • López-Martínez E.
  • Fernandez M.
  • Couleaud P.
  • Martin-Lasanta A.
  • Romera D.
  • Sanchez-Iglesias A.
  • Casado S.
  • Osorio M.R.
  • Abad J.M.
  • González, Teresa
  • Cortajarena A.L.
  • Mejías, Sara H.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Tuning the Optical Properties of Au Nanoclusters by Designed Proteins

  • Lopez-Martinez E.
  • Gianolio D.
  • Garcia-Orrit S.
  • Cabanillas González, Juan
  • Sanchez-Cano C.
  • Cortajarena A.L.
  • Vega-Mayoral, Victor
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biocatalytic protein-based materials for integration into energy devices

  • Sánchez-deAlcázar, Daniel
  • Velasco-Lozano, Susana
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
There is a current need to fabricate new biobased functional materials. Bottom-up approaches to assemble simple molecular units have shown promise for biomaterial fabrication due to their tunability and versatility for the incorporation of functionalities. Herein, the fabrication of catalytic protein thin films by the entrapment of catalase into protein films composed of a scaffolding protein is demonstrated. Extensive structural and functional characterization of the films provide evidence of the structural integrity, order, stability, catalytic activity, and reusability of the biocatalytic materials. Finally, these functional biomaterials are coupled with piezoelectric disks to fabricate a second generation of bio-inorganic generators. These devices are capable of producing electricity from renewable fuels through catalase-driven gas production that mechanically stimulates the piezoelectric material., This work was partially supported by the European Research Council ERC‐CoG‐648071‐ProNANO (ALC), the Spanish Ministry of Economy and Competitiveness (BIO2016‐77367‐R) (ALC); PCI2018‐092984, and the Basque Government (Elkartek KK‐2017/00008). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—grant no. MDM‐2017‐0720 (CIC biomaGUNE). We also acknowledge funding from the Fundación Hergar (FLG), Foundation ARAID, and Aragon Government (E37‐17R) for funding F.L.G., and Marie‐Curie Actions (NANOBIENER project) for funding S.V.L.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reduction of cardiac TGFβ-mediated profibrotic events by inhibition of Hsp90 with engineered protein

  • Cáceres, Rodrigo
  • Chavez, Tatiana
  • Maestro, David
  • Palanca, Ana R.
  • Bolado, Patricia
  • Madrazo, F.
  • Aires, Antonio
  • Cortajarena, Aitziber L.
  • Villar Ramos, Ana V.
Myocardial fibroblast activation coupled with extracellular matrix production is a pathological signature of myocardial fibrosis and is governed mainly by transforming growth factor TGFβ-Smad2/3 signaling. Targeting the ubiquitous TGFβ leads to cellular homeostasis deregulation with adverse consequences. We previously showed the anti-fibrotic effects upon downregulation of 90-kDa heat shock protein (Hsp90), a chaperone that associates to the TGFβ signaling cascade. In the present study, we use a fluorescent-labeled Hsp90 protein inhibitor (CTPR390–488) with specific Hsp90 binding properties to reduce myocardial pro-fibrotic events in vitro and in vivo. The mechanism of action involves the disruption of TGFβRI-Hsp90 complex, resulting in a decrease in TGFβ signaling and reduction in extracellular matrix collagen. In vivo, decreased myocardial collagen deposition was observed upon CTPR390–488 treatment in a pro-fibrotic mouse model. This is the first study demonstrating the ability of an engineered Hsp90 protein inhibitor to block collagen expression, reduce the motility of myocardial TGFβ-activated fibroblasts and ameliorate angiotensin-II induced cardiac myocardial fibrosis in vivo., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad [BIO2015-72124-EXP] and [BIO2016- 77367-R], and the European Research CouncilERC-2014-CoG-648071-ProNANO. The Instituto de Formación e Investigación Marqués de Valdecilla IDIVAL [InnVal 15/31] and [InnVal 17/22], and the FEDER European Union, SODERCAN “Proyecto Puente 2017”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering multifunctional metal/protein hybrid nanomaterials as tools for therapeutic intervention and high-sensitivity detection

  • Aires, Antonio
  • Maestro, David
  • Ruiz del Río, Jorge
  • Palanca, Ana R.
  • López-Martínez, Elena
  • Llarena, Irantzu
  • Geraki, Kalotina
  • Sánchez-Cano, Carlos
  • Villar Ramos, Ana V.
  • Cortajarena, Aitziber L.
© 2021 The Author(s)., Protein-based hybrid nanomaterials have recently emerged as promising platforms to fabricate tailored multifunctional biologics for biotechnological and biomedical applications. This work shows a simple, modular, and versatile strategy to design custom protein hybrid nanomaterials. This approach combines for the first time the engineering of a therapeutic protein module with the engineering of a nanomaterial-stabilizing module within the same molecule, resulting in a multifunctional hybrid nanocomposite unachievable through conventional material synthesis methodologies. As the first proof of concept, a multifunctional system was designed ad hoc for the therapeutic intervention and monitoring of myocardial fibrosis. This hybrid nanomaterial combines a designed Hsp90 inhibitory domain and a metal nanocluster stabilizing module resulting in a biologic drug labelled with a metal nanocluster. The engineered nanomaterial actively reduced myocardial fibrosis and heart hypertrophy in an animal model of cardiac remodeling. In addition to the therapeutic effect, the metal nanocluster allowed for in vitro, ex vivo, and in vivo detection and imaging of the fibrotic disease under study. This study evidences the potential of combining protein engineering and protein-directed nanomaterial engineering approaches to design custom nanomaterials as theranostic tools, opening up unexplored routes to date for the next generation of advanced nanomaterials in medicine., This work was partially supported by the European Research Council ERC-CoG-648071-ProNANO and ERC-PoC-841063-NIMM; Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00; RTI2018-095214-B-I00; BIO2016-77367-C2-1-R; and BIO2015-72124-EXP); the Basque Government (Elkartek KK-2017/00008; RIS3-2019222005); and IDIVAL InnVal 17/22. C. S. C. thanks Gipuzkoa Foru Aldundia (Gipuzkoa Fellows program; grant number 2019-FELL-000018-01/62/2019) for financial support. E.L.-M. thanks the Spanish Ministry of Science and Innovation for the FPI grant (BES-2017-079646). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 (CIC biomaGUNE). SXRF maps were acquired at the I18 beamline in the frame of the Diamond proposals SP20603.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlative 3D cryo X-ray imaging reveals intracellular location and effect of designed antifibrotic protein-nanomaterial hybrids

  • Groen, J.
  • Palanca, Ana R.
  • Aires, Antonio
  • Conesa, José J.
  • Maestro, David
  • Rehbein, Stefan
  • Harkiolaki, M.
  • Villar Ramos, Ana V.
  • Cortajarena, Aitziber L.
  • Pereiro, Eva
© 2021 The Author(s)., Revealing the intracellular location of novel therapeutic agents is paramount for the understanding of their effect at the cell ultrastructure level. Here, we apply a novel correlative cryo 3D imaging approach to determine the intracellular fate of a designed protein–nanomaterial hybrid with antifibrotic properties that shows great promise in mitigating myocardial fibrosis. Cryo 3D structured illumination microscopy (cryo-3D-SIM) pinpoints the location and cryo soft X-ray tomography (cryo-SXT) reveals the ultrastructural environment and subcellular localization of this nanomaterial with spatial correlation accuracy down to 70 nm in whole cells. This novel high resolution 3D cryo correlative approach unambiguously locates the nanomaterial after overnight treatment within multivesicular bodies which have been associated with endosomal trafficking events by confocal microscopy. Moreover, this approach allows assessing the cellular response towards the treatment by evaluating the morphological changes induced. This is especially relevant for the future usage of nanoformulations in clinical practices. This correlative super-resolution and X-ray imaging strategy joins high specificity, by the use of fluorescence, with high spatial resolution at 30 nm (half pitch) provided by cryo-SXT in whole cells, without the need of staining or fixation, and can be of particular benefit to locate specific molecules in the native cellular environment in bio-nanomedicine., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. This work was partially supported by the European Research Council ERC-CoG-648071-ProNANO, ERC-PoC-841063-NIMM; Spanish State Research Agency, Spain; (BIO2015-72124-EXP), (MDM-2017-0720), (PID2019-111649RB-I00) and (RTI2018-095214-B-I00); the Basque Government (Elkartek KK-2017/00008; RIS3-2019222005); and the Next Generation and Innovation Valdecilla (PREVAL19/05), (IDIVAL INNVAL17/22), (INNVAL20/34), (NVAL18/11) and (NextVal 18/14). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Designing artificial fluorescent proteins: Squaraine-LmrR biophosphors for high performance deep-red biohybrid light-emitting diodes

  • Ferrara, Sara
  • Mejias, Sara H.
  • Liutkus, Mantas
  • Renno, Giacomo
  • Stella, Francesca
  • Kociolek, Irene
  • Fuenzalida-Werner, Juan Pablo
  • Barolo, Claudia
  • Coto, Pedro B.
  • Cortajarena, Aitziber L.
  • Costa, Rubén D.
Biophosphors with fluorescent proteins (FPs) are promising candidates to replace rare-earth color down-converting filters for white light-emitting diodes (LEDs). There is, however, a lack of deep-red FPs meeting high photostabilities, photoluminescence quantum yields (ϕ), and throughput expression yields. Herein, a new approach for the design of highly emissive and stable deep-red biophosphors combining an artificial FP (Lactococcal multidrug resistance Regulator (LmrR) as protein host and an archetypal red-emitting squaraine (S) as guest) with a polymer network is demonstrated toward high performing deep-red biohybrid LEDs (Bio-HLEDs). At first, the best protein pocket (aromaticity, polarity, charge, etc.) to stabilize S in water is determined using four LmrR variants (position 96 with tryptophan, histidine, phenylalanine, and alanine). Computational and time-resolved spectroscopic findings suggest that the tryptophan is instrumental toward achieving artificial red-emitting FPs with ϕ > 50% stable over weeks. These features are further enhanced in the polymer coating (ϕ > 65% stable over months) without affecting emission color. Finally, deep-red Bio-HLEDs are fabricated featuring external quantum efficiencies of 7% and stabilities of ≈800 h. This represents threefold enhancement compared to reference devices with S-polymer color filters. Overall, this work highlights a new design for highly emissive deep-red biophosphors, achieving record performance in deep-red protein-LEDs., The authors acknowledge the European Union's Horizon 2020 research and innovation FET-OPEN under grant agreement ARTIBLED No. 863170. R.D.C. acknowledges the ERC-Co InOutBioLight No. 816856. P.B.C. acknowledges financial support from the Ministry of Science, Innovation and Universities of Spain under the Beatriz Galindo Programme (No. MCIU-19-BEAGAL 18/0224), from MCIN/AEI/10.13039/501100011033 grant No. PGC2018-095953-B-I00 and from the Technical University of Munich (TUM) under the TUM Global Visiting Professor Programme. A.L.C. acknowledges support by the European Research Council ERC-CoG-648071-ProNANO and ERC-PoC-841063-NIMM; and Agencia Estatal de Investigación, Spain (No. PID2019-111649RB-I00). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant No. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineered protein-driven synthesis of tunable iron oxide nanoparticles as T1 and T2 magnetic resonance imaging contrast agents

  • Aires, Antonio
  • Fernández-Afonso, Yilian
  • Guedes, Gabriela
  • Guisasola, Eduardo
  • Gutiérrez, Lucía
  • Cortajarena, Aitziber L.
Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications., A.L.C. acknowledges support from the European Research Council ERC-CoG-648071-ProNANO, ERC-PoC-101069356-NanoImaging; Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00); and the Basque Government (RIS3-2019222005). L.G. acknowledges the Agencia Estatal de Investigación, Spain for PGC2018-096016-B-I00 project. G.G. acknowledges the financial support from the “la Caixa” Foundation (ID100010434, fellowship: LCF/BQ/DI20/11780020). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720 (CIC biomaGUNE). We thank Dr. J. Calvo, Dr. R. Pazos, Dr. D. Di Silvio, Dr. S. Plaza, Dr. D. Padró, M. Gallego, and M. Moller at CIC biomaGUNE for the support with mass spectrometry, X-ray photoelectron spectroscopy, MRI, and TEM measurements. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineered repeat proteins as scaffolds to assemble multi-enzyme systems for efficient cell-free biosynthesis

  • Ledesma-Fernandez, Alba
  • Velasco-Lozano, Susana
  • Santiago Arcos, Francisco Javier
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
Multi-enzymatic cascades with enzymes arranged in close-proximity through a protein scaffold can trigger a substrate channeling effect, allowing for efficient cofactor reuse with industrial potential. However, precise nanometric organization of enzymes challenges the design of scaffolds. In this study, we create a nanometrically organized multi-enzymatic system exploiting engineered Tetrapeptide Repeat Affinity Proteins (TRAPs) as scaffolding for biocatalysis. We genetically fuse TRAP domains and program them to selectively and orthogonally recognize peptide-tags fused to enzymes, which upon binding form spatially organized metabolomes. In addition, the scaffold encodes binding sites to selectively and reversibly sequester reaction intermediates like cofactors via electrostatic interactions, increasing their local concentration and, consequently, the catalytic efficiency. This concept is demonstrated for the biosynthesis of amino acids and amines using up to three enzymes. Scaffolded multi-enzyme systems present up to 5-fold higher specific productivity than the non-scaffolded ones. In-depth analysis suggests that channeling of NADH cofactor between the assembled enzymes enhances the overall cascade throughput and the product yield. Moreover, we immobilize this biomolecular scaffold on solid supports, creating reusable heterogeneous multi-functional biocatalysts for consecutive operational batch cycles. Our results demonstrate the potential of TRAP-scaffolding systems as spatial-organizing tools to increase the efficiency of cell-free biosynthetic pathways., We would like to thank the financial support provided by Era-CoBioTech (Project ID: 61 HOMBIOCAT/ PCI2018-092984, F.L.-G. and A.L.C.), by European Research Council (818089, F.L-G and 648071, A.L.C.) and by the Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00, A.L.C.). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-living and highly efficient bio-hybrid light-emitting diodes with zero-thermal-quenching biophosphors

  • Espasa, Anna
  • Lang, Martina
  • Aguiño, Carmen F.
  • Sánchez-de Alcazar, Daniel
  • Fernández-Blázquez, Juan P.
  • Sonnewald, Uwe
  • Cortajarena, Aitziber L.
  • Coto, Pedro B.
  • Costa, Rubén D.
Bio-hybrid light-emitting diodes (Bio-HLEDs) based on color down-converting filters with fluorescent proteins (FPs) have achieved moderate efficiencies (50 lm/W) and stabilities (300 h) due to both thermal- and photo-degradation. Here, we present a significant enhancement in efficiency (~130 lm/W) and stability (>150 days) using a zero-thermal-quenching bio-phosphor design. This is achieved shielding the FP surface with a hydrophilic polymer allowing their homogenous integration into the network of a light-guiding and hydrophobic host polymer. We rationalize how the control of the mechanical and optical features of this bio-phosphor is paramount towards highly stable and efficient Bio-HLEDs, regardless of the operation conditions. This is validated by the relationships between the stiffness of the FP-polymer phosphor and the maximum temperature reached under device operation as well as the transmittance of the filters and device efficiency., A.E. and R.D.C. acknowledge the program “Ayudas para la atracción de talento investigador—Modalidad 1, of the Consejería de Educación, Juventud y Deporte— Comunidad de Madrid with reference number 2016-T1/IND-1463”. R.D.C. also acknowledges the Spanish MINECO for the Ramón y Cajal program (RYC-2016-20891), the Europa Excelencia program (ERC2019- 092825), and HYNANOSC (RTI2018-099504-A-C22), as well as the 2018 Leonardo Grant for Researchers and Cultural Creators from BBVA Foundation and the FOTOART-CM project funded by Madrid region under program P2018/NMT-4367. P.B.C. acknowledges financial support of the Ministry of Science, Innovation and Universities of Spain under the Beatriz Galindo Programme (MCIU-19-BEAGAL 18/0224). A.L.C. acknowledges the European Research Council ERC-CoG-648071-ProNANO, the Spanish Ministry of Economy and Competitiveness (BIO2016-77367-R), the Basque Government (Elkartek KK-2017/00008). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720 (CIC biomaGUNE). The project leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 863170., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deciphering limitations to meet highly stable bio-hybrid light-emitting diodes

  • Fernández-Luna, Verónica
  • Sánchez-de Alcazar, Daniel
  • Fernández-Blázquez, Juan P.
  • Cortajarena, Aitziber L.
  • Coto, Pedro B.
  • Costa, Rubén D.
Color down-converting filters with fluorescent proteins (FPs) embedded in a polymer matrix have led to new bio-hybrid light-emitting diodes (Bio-HLEDs), featuring stabilities of 100 h and <1 min at low and high applied currents, respectively. Herein, the FP deactivation mechanism in Bio-HLEDs at high driving currents is deciphered. Primarily, the nonradiative energy relaxation of FPs upon excitation promotes the release of excess energy to the polymer matrix, reaching 60 °C and, in turn, a significant thermal emission quenching. This is circumvented by changing the device architecture, achieving stabilities of >300 h at high driving currents. Here, the photoinduced deactivation mechanism takes place, consisting of a slow and reversible partial dehydration followed by a quick and irreversible deactivation of the highly emissive ionic form. This is supported by steady-state/time-resolved emission, circular dichroism, and electrochemical impedance spectroscopic techniques. Overall, the limitations of Bio-HLEDs concerning matrix, buffers, device design, and FP stability are highlighted as key aspects to achieve efficient and stable devices., V.F.-L. and R.D.C. acknowledge the program “Ayudas para la atracción de talento investigador—Modalidad 1, of the Consejería de Educación, Juventud y Deporte—Comunidad de Madrid with reference number 2016-T1/IND-1463.” R.D.C. also acknowledges the Spanish MINECO for the Ramón y Cajal program (RYC-2016-20891), the Europa Excelencia program (ERC2019-092825), and HYNANOSC (RTI2018-099504-A-C22), as well as the 2018 Leonardo Grant for Researchers and Cultural Creators from BBVA Foundation and the FOTOART-CM project funded by Madrid region under programme P2018/NMT-4367. P.B.C. acknowledges financial support from the Regional Council for Industry and Employment of the Principality of Asturias, the European Regional Development Fund (ERDF), and the Spanish Ministry of Science, Innovation and Universities (PGC2018-095953-B-I00). A.L.C. acknowledges the European Research Council ERC-CoG-648071-ProNANO, the Spanish Ministry of Economy and Competitiveness (BIO2016-77367-R), and the Basque Government (Elkartek KK-2017/00008). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—grant no. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the dimensionality of protein-peptide coassemblies to build 2D conductive nanomaterials

  • Pérez-Chirinos, Laura
  • Almonte, Lisa
  • Cortés-Ossa, Juan David
  • Solano, Eduardo
  • Calvo, M. Reyes
  • Sasselli, Ivan R.
  • Cortajarena, Aitziber L.
The natural self-assembly tendency of proteins to build complex structural architectures has kindled inspiration in developing supramolecular structures through the rational design of biomacromolecules. While there has been significant progress in achieving precise control over the morphology of self-assembled structures, combining different molecules within assemblies enables the design of materials with increased complexity, sophisticated structures, and a broad spectrum of functionalities. Here, the development of 1D and 2D peptide-protein coassembled systems based on the design of amphiphilic peptides and engineered proteins is described. The peptide was optimized to form stable self-assembled fibers by evaluating, computationally and experimentally, the assembling tendencies and the supramolecular features of peptides with different lengths and negative charges. A superhelical repeat protein was engineered by fusing one or two amphiphilic peptides into one or both termini. This modification drove the coassembly between the self-assembled fibers and the protein with one or two peptides, resulting in 1D or 2D coassembled systems. The protein films and the 2D coassembled system exhibited high ionic conductivity for a biomolecular system, attributed to their high content of charged residues, positioning these materials as promising candidates for developing bioelectronic devices. Thus, this work provides a versatile framework for developing coassembled materials with tunable dimensionality by using biocompatible building blocks without any additional chemical moieties, highlighting the potential for their use in biocompatible electronics., L.P.-C. and A.L.C. acknowledge financial support from the Spanish State Training Subprogram (PRE2019-090076), and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720). A.L.C. acknowledges support by the Spanish State Research Agency (grants PID2022-137977OB-I00 funded by MCIN/AEI/10.13039/501100011033) and the European Research Council-Grant (ERC-CoG-ProNANO-648071). A.L.C., M.R.C., L.A., and J.D.C.-O. acknowledge the Union’s Horizon 2020 FET Open under grant agreement No. 964593 (eProt). A.L.C. and M.R.C. acknowledge the Spanish MCIN (TED2021-131641B-C41, TED2021–131641B-C43 grants) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. M.R.C. acknowledges the Spanish MCIN (CNS2023-14515) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.S. acknowledges Ramon y Cajal Program (RYC2021-033294-I), Spanish State Research Agency (PID2022-136392NA-I00), and Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). This work was performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 ministry of Science (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Peptide electrostatic modulation directs human neural cell fate

  • Pérez-Chirinos, Laura
  • Barceló, Xavier
  • Chiariello, M. Gabriella
  • Sanz, Irene
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Ortega, J. Alberto
  • Marrink, Siewert J.
  • Cortajarena, Aitziber L.
  • Álvarez, Zaida
  • Sasselli, Ivan R.
The data that support the findings of this study are available from the corresponding author upon reasonable request., Supramolecular self-assembled systems have emerged as versatile platforms for engineering biomimetic environments that precisely regulate cellular behavior. These materials have tunable properties such as stiffness, hydrophobicity, and molecular composition, allowing for customization of their structure and function. Despite significant advances, the specific role of electrostatic properties in modulating cellular responses within supramolecular assemblies remains poorly understood. Here, a peptide library with diverse electrostatic profiles is designed to systematically investigate their influence on the bioactivity of supramolecular assemblies for neural regeneration. Combining computational and experimental methods, the self-assembly conditions of these peptides are optimized to create stable, biologically relevant architectures. Using human neural progenitor cell (hNPC) cultures, it is demonstrated that negatively charged environments enhance cell survival and promote neuronal differentiation. Specifically, high negative charges activate critical signaling pathways, including the mitogen-activated protein kinase (MAPK) cascade and cell adhesion mechanisms, leading to neuronal lineage commitment. This study establishes a novel framework for the design of supramolecular systems, offering an unprecedented ability to analyze specific parameters in cell behavior. By achieving control beyond conventional biomaterials, this work provides valuable insights into the complex interplay of biophysical and biochemical cues in the native neural microenvironment, with implications for regenerative medicine and biomaterial design., The authors acknowledge the support of the following grants: Grants PID2022-137977OB-I00 (A.L.C.), TED2021-131641B-C41 (A.L.C.), PID2020-114407RA-I00 (J.A.O.), PID2021-124839OA-I00 (Z.A.), and PID2022-136392NA-I00 (I.R.S.), funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU; Grants CNS2023-144820 (J.A.O.), CNS2022-135407 (Z.A.), funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR; Grant ERC-CoG-ProNANO-648071 (A.L.C.), funded by European Research Council; Grant 964593 (eProt) (A.L.C.), funded by European Union's Horizon 2020 FET Open; Grant R01AG086270 (Z.A. and J.A.O.), funded by the National Institute on Aging of the National Institutes of Health (NIH); and Grant P199 (Z.A.), supported by the IRP Research Foundation. The authors acknowledge the support of fellowships and research programs: the Spanish State Training Subprogram PRE2019-090076 (L.P.C.) and EMBO Scientific Exchange Grant 10283 (L.P.C.), and Juan de la Cierva Program JDC2023-051798-I (X.B.) funded by MICIU/AEI/10.13039/501100011033 and “ESF+.” The authors acknowledge support from the Ramón y Cajal Program, RYC2020-028732-I (Z.A.), RYC2021-033294-I (I.R.S.), and RYC2019-026980-I (J.A.O.), and I.R.S. also acknowledges funding from the Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). The authors also thank the IBEC Core Facility and Microscopy Characterization Facility, Unit 7 of ICTS “NANBIOSIS” from CIBER-BBN both at Institute for Bioengineering of Catalonia. Computational work was carried out at the HPC Clusters at the Donostia International Physics Center (DIPC). Mass spectrometry/Proteomics was performed at the IRB Barcelona Mass Spectrometry and Proteomics Core Facility, which is granted in the framework of the 2014-2020 ERDF Operational Programme in Catalonia, co-financed by the European Regional Development Fund (ERDF). Reference: IU16-015983. Institutional support was provided by Institute of Neurosciences—University of Barcelona as well as CIC biomaGUNE and IBEC which acknowledge the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720) and the Centro de Excelencia Severo Ochoa (Grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/501100011033), respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001282-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Tuning the dimensionality of supramolecular functional materials based on the rational design of biomolecules, Modulando la dimensionalidad de materiales supramoleculares funcionales mediante el diseño racional de biomoléculas

  • Pérez-Chirinos, Laura
For the Degree of Doctor in Molecular Biology and Biomedicine at the University of the Basque Country., [ES] El autoensamblaje es un proceso natural y espontáneo que ocurre tanto en sistemas biológicos como no biológicos con el fin de formar estructuras complejas con alto nivel de organización. Las proteínas son uno de los principales ejemplos de moléculas biológicas que forman estructuras supramoleculares arquitectónicamente complejas a partir del autoensamblaje de moléculas individuales. Este proceso natural ha servido como inspiración para el desarrollo de estructuras supramoleculares mediante el diseño racional de biomacromoléculas con dicha capacidad de autoensamblaje. A pesar del alto control y conocimiento que existe sobre la morfología de las estructuras autoensambladas, la combinación de diferentes moléculas en los ensamblajes abre nuevas oportunidades para el desarrollo de materiales con una complejidad y versatilidad que no es posible adquirir en simples autoensamblajes. En este sentido, las estructuras supramoleculares coensambladas ofrecen unas ventajas excepcionales para el desarrollo de estructuras novedosas y complejas con un amplio espectro de posibles aplicaciones innovadoras. El desarrollo de estructuras supramoleculares mediante el diseño de secuencias peptídicas anfifílicas con capacidad de autoensamblaje es un tema de investigación ampliamente estudiado. La capacidad de controlar la estructura de estas moléculas permite el desarrollo de nanoestructuras supramoleculares con propiedades específicas y modificables. Actualmente hay distintas líneas de investigación centradas en este tipo de sistemas. Desde el punto de vista estructural, la predicción de la morfología y la topología de estas estructuras supramoleculares como resultado del diseño racional de secuencias moleculares sigue siendo un campo de investigación amplio y desafiante. Desde el punto de vista de la aplicación, se ha demostrado que estos sistemas tienen excepcionales propiedades como materiales bioactivos para su uso como matrices artificiales extracelulares en cultivos celulares e ingeniería de tejidos cuando se combinan con secuencias peptídicas bioactivas, donde las propiedades físicas y mecánicas de la parte estructural también juegan un papel fundamental. Además, se ha demostrado que estas estructuras supramoleculares presentan propiedades conductoras gracias a la presencia de residuos cargados y la deslocalización de electrones en residuos aromáticos apilados mediante interacciones π-π, posicionando a estos materiales como potenciales candidatos para la bioelectrónica. Las proteínas de repetición son excelentes candidatos para el diseño de estructuras robustas por sus características modulares que permiten la modificación de tamaño y morfología de estas moléculas según las necesidades. La familia de las proteínas tetratricopeptide repeat (TPR), incluye proteínas que se basan en un bloque estructural de repetición constituido por 34 aminoácidos que forman un motivo de repetición con una estructura de hélice alfa-hélice-hélice alfa. La repetición en tándem de estos bloques individuales forma proteínas de mayor tamaño con una estructura de superhélice. Mediante el análisis estadístico de todas las secuencias naturales de proteínas TPR, se diseñó la secuencia consenso (CTPR). De este análisis se observó que hay 8 aminoácidos por cada bloque individual de 34 aminoácidos que se mantienen altamente conservados entre todas las secuencias naturales, los cuales son responsables de mantener la estructura superhelicoidal característica de la familia de las proteínas TPR, mediante su participación en interacciones de empaquetamiento entre repeticiones. Como resultado de su modularidad, estas proteínas presentan propiedades intrínsecas de autoensamblaje mediante interacciones “cabeza – cola” y “lado – a – lado” entre las proteínas. Dicha modularidad junto con la tendencia de autoensamblaje han dado lugar al desarrollo de materiales basados en proteínas con una morfología y anisotropía específicas. Además, estos materiales han presentado propiedades conductoras incipientes, convirtiéndolos en candidatos prometedores para el desarrollo de materiales bioelectrónicos, entre otras aplicaciones. El objetivo principal presentado en esta tesis es el desarrollo de nanomateriales híbridos con dimensionalidades regulables basados en el coensamblaje de péptidos anfifílicos diseñados racionalmente, y proteínas modificadas para aplicaciones en bioelectrónica y cultivos celulares. El diseño de estos materiales híbridos se basa en el coensamblaje entre fibras peptídicas autoensambladas y proteínas CTPR con uno o dos péptidos fusionados a uno o ambos extremos terminales. El coensamblaje entre las fibras y la proteína CTPR fusionada a un péptido está diseñado para formar nanofibras híbridas unidimensionales (1D), mientras que el coensamblaje entre las fibras y la proteína CTPR fusionada a dos péptidos está diseñado para formar una malla híbrida bidimensional (2D). Esta tesis está dividida en cinco capítulos, presentando una visión general en el primer capítulo, el diseño racional de péptidos y proteínas en el segundo y tercer capítulos, el diseño y caracterización de los materiales híbridos en el cuarto capítulo, y el estudio de las propiedades conductoras y bioactivas de los diferentes sistemas en el quinto capítulo., [EN] Self-assembly is a natural, spontaneous process that appears in many biological and non-biological systems to form sophisticated, organized structures. Proteins are one of the primary examples of biological molecules that build supramolecular systems by self-assembling their individual molecules to obtain complex structural architectures. This natural process kindled inspiration in the development of supramolecular structures through the rational design of biomacromolecules. In spite of the high control over the morphology of self-assembled structures, the combination of different molecules within assemblies opens up new opportunities for the development of materials with increased complexity and versatility. In this sense, co-assembled supramolecular structures offer a challenging and compelling avenue for the design of novel, sophisticated structures with a broad spectrum of innovative functionalities. The design of amphiphile peptidic sequences that self-assemble into supramolecular structures has been thoroughly reported in the literature. The high control over the structure of these molecules permits the development of supramolecular nanostructures with precise and tunable properties and functions. The ongoing research involving these structures is focused on different research lines. From the structural point of view, predicting the morphology and topology of the supramolecular structures resulting from the design of the molecular sequences is still a challenging endeavor. From the application point of view, these structures have exhibited exceptional bioactive properties as artificial extracellular matrices for cell culture and tissue engineering when combined with bioactive peptide sequences, in which the physical and mechanical properties of the structural part also play a fundamental role. Additionally, these structures have demonstrated compelling conductive properties due to the presence of charged residues and the delocalization of electrons in π-stacked aromatic residues, positioning them as promising materials for bioelectronics. Repeat proteins are outstanding candidates for the design of robust protein scaffolds due to their modular features that allow their versatile tunability in size and morphology. The tetratricopeptide repeat (TPR) protein family encloses proteins that are based on a 34 amino acid helix-turn-helix structural building block that can be repeated in tandem arrays to form larger proteins with a superhelical fold. The consensus TPR sequence (CTPR) was designed based on the statistical analysis of natural TPR sequences. This analysis revealed that 8 residues within the 34 motif sequence were highly conserved among the natural TPR proteins. These residues are known to be responsible for preserving the superhelical TPR fold through their involvement in inter- and intra- repeat packing interactions. As a result of their modularity, CTPR proteins exhibit inherent self-assembling properties driven by “head-to-tail” and “side-to-side” interactions. This modularity and self-assembling properties have permitted the development of protein-based materials with controlled morphology and anisotropy. Moreover, these materials have also presented incipient conductive properties, making them promising candidates for the development of bioelectronic materials, among other applications. The main objective presented in this thesis is the development of hybrid nanomaterials with tunable dimensionalities based on the co-assembly of rationally designed amphiphilic peptides and engineered proteins for applications in bioelectronics and cell culture. The design of these hybrid materials is based on the co-assembly between self-assembled peptide fibers and CTPR proteins with one or two peptides fused to one or both termini of the proteins. The co-assembly between the fibers and the CTPR protein linked to one peptide is designed to form 1D hybrid nanofibers, whereas the co-assembly between fibers and the CTPR protein linked to two peptides is designed to form a 2D hybrid mesh. This thesis is divided into five chapters, presenting an overall overview in the first chapter, the peptide and protein rational design in the second and third chapters, the design and characterization of the hybrid materials in the fourth chapter, and the study of the conductive and bioactive properties of the different systems in the fifth chapter., The work presented in this thesis was funded by the Spanish State Training Subprogram PRE2019-090076, by the European Research Council ERC CoG-ProNANO-648071 Consolidator Grant, by the European Commission H2020 FET-OPEN 01-2018-2019-2020 project, by the EMBO Scientific Exchange Grant 10283 and performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 Ministry of Science, Innovation and Universities., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bioorthogonal catalytic activation of Platinum and Ruthenium anticancer complexes by FAD and flavoproteins

  • Alonso de Castro, S.
  • Cortajarena, A.L.
  • López-Gallego, F.
  • Salassa, L.
Recent advances in bioorthogonal catalysis promise to deliver new chemical tools for performing chemoselective transformations in complex biological environments. Herein, we report how FAD (flavin adenine dinucleotide), FMN (flavin mononucleotide), and four flavoproteins act as unconventional photocatalysts capable of converting PtIV and RuII complexes into potentially toxic PtII or RuII-OH2 species. In the presence of electron donors and low doses of visible light, the flavoproteins mini singlet oxygen generator (miniSOG) and NADH oxidase (NOX) catalytically activate PtIV prodrugs with bioorthogonal selectivity. In the presence of NADH, NOX catalyzes PtIV activation in the dark as well, indicating for the first time that flavoenzymes may contribute to initiating the activity of PtIV chemotherapeutic agents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineered protein-driven synthesis of tunable iron oxide nanoparticles as T1 and T2 magnetic resonance imaging contrast agents

  • Aires, Antonio
  • Fernández-Afonso, Yilian
  • Guedes, Gabriela
  • Guisasola, Eduardo
  • Gutiérrez, Lucía
  • Cortajarena, Aitziber L.
Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications.