Skip to main content

GRAFENO EN CELULAS SOLARES PEROVSKITAS Y ORGANICAS: TINTAS E INTERFACES DE GRAFENO

ENE2016-79282-C5-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 91
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH···O=C hydrogen bonds and removal of chemisorbed water

  • Núñez, Jesús David
  • Benito, Ana M.
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
  • Maser, Wolfgang K.
6 Figuras, Owing to their great interest for energy storage and sensing applications, multi-layer papers consisting of graphene oxide – carbon nanotube (GO-CNT) hybrid sheets were prepared by in-situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. water molecules inherently bound to oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···O=C hydrogen bonds between the carboxylic groups of oCNTs and OFGs of GO. At oCNT contents of about 10 to 15 wt. % this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. Thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices., JDN is thankful for his CSIC PhD grant JAEPre09-01155 covering also his research stay at Rice University. WKM and AMB acknowledge financial support from Spanish MINECO and the European Regional Development Fund through project grants ENE2013-48816-C5-5-R, ENE2016-79282-C5-1-R and the Government of Aragon and the European Social Fund under project DGA-FSE-T66 CNN. RA gratefully acknowledges the support from MINECO through project grants FIS2013-46159- C3-3-P and MAT2016-79776-P. Some of the research has received funding from the European Union FP7 program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship, and H2020 Marie Skłodowska-Curie grant 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembled core-shell CdTe/Poly(3-hexylthiophene) nanoensembles as novel donor−acceptor light-harvesting systems

  • Istif, Emin
  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Stergiou, Anastasios
  • Skaltsas, Theodosis
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
The self-assembly of novel core-shell nanoensembles consisting of regioregular poly(3-hexylthiophene) nanoparticles (P3HTNPs) of 100 nm as core and semiconducting CdTe quantum dots (CdTeQDs) as shell with a thickness of a few tens of nanometres was accomplished by employing a re-precipitation approach. The structure, morphology and composition of CdTeQDs/P3HTNPs nanoensembles were confirmed by high-resolution scanning transmission microscopy and dynamic light scattering studies. Intimate interface contact between the CdTeQDs shell and the P3HTNPs core leads to the stabilization of the CdTeQDs/P3HTNPs nanoensemble as probed by steady-state absorption spectroscopy. Effective quenching of the characteristic photoluminescence of CdTeQDs at 555 nm, accompanied by simultaneous increase of emission of P3HTNPs at 660 and 720 nm, reveals photoinduced charge-transfer processes. Probing the redox properties of films of CdTeQDs/P3HTNPs further proves the formation of a stabilized core-shell system in the solid-state. Photoelectrochemical assays on CdTeQDs/P3HTNPs films show a reversible on-off photoresponse at a bias voltage of +0.8 V with a three times increased photocurrent compared to CdTeQDs. The improved charge separation is directly related to the unique core-shell configuration, in which the outer CdTeQDs shell forces the P3HTNPs core to effectively act as electron acceptor. The creation of novel donor-acceptor core-shell hybrid materials via self-assembly is transferable to other types of conjugated polymers and semiconducting nanoparticles. This work, therefore, opens new pathways for the design of improved optoelectronic devices., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. AMB and WKM gratefully acknowledge financial support from Spanish MINECO under project ENE206-79282-C5-1-R and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-T66 and associated European Social Fund. RA gratefully acknowledges financial support from Spanish MINECO under project MAT2016 79776-P and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-E26 and associated European Social Fund. The STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon Universidad de Zaragoza, Spain. The authors would like to thank Esteban Urriolabeitía for carrying out the NMR studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
  • Maser, Wolfgang K.
The game-changing role of graphene oxide (GO) in tuning the excitonic behavior of conjugated polymer nanoparticles is described for the first time. This is demonstrated by using poly(3-hexylthiophene) (P3HT) as a benchmark conjugated polymer and employing an in-situ re-precipitation approach resulting in P3HT nanoparticles (P3HTNPs) with sizes of 50 - 100 nm in intimate contact with GO. During the self-assembly process, GO changes the crystalline packing of P3HT chains in the forming P3HTNPs from H to H/J aggregates exhibiting exciton coupling constants as low as 2 meV, indicating favorable charge separation along the P3HT chains. Concomitantly, π-π interface interactions between the P3HTNPs and GO sheets are established resulting in the creation of P3HTNPs-GO charge-transfer complexes whose energy bandgaps are lowered by up to 0.5 eV. Moreover, their optoelectronic properties, pre-established in the liquid phase, are retained when processed into thin films from the stable aqueous dispersions, thus eliminating the critical dependency on external processing parameters. These results can be transferred to other types of conjugated polymers. Combined with the possibility of employing water based “green” processing technologies, charge-transfer complexes of conjugated polymer nanoparticles and GO open new pathways for the fabrication of improved optoelectronic thin film devices., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Frictional and mechanical behaviour of graphene/UHMWPE composite coatings

  • Chih, A.
  • Ansón-Casaos, Alejandro
  • Puértolas, J. A.
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Bulk-modified ultra-high molecular weight polyethylene (UHMWPE) is a biomaterial currently used for joint replacements. As an alternative, we assess the frictional behaviour of coatings based on graphene/UHMWPE composites and sprayed graphene, which maintain the high performance of the UHMWPE matrix. Composite coatings were prepared with 0–4.6 wt% of graphene nanoplatelets (GNP) and 1–2 layered graphene (2LG). Mechanical properties of the coatings were measured by nanoidentation and friction coefficients were determined with a ball-on-disk tribometer. The results indicate that GNP present better tribological behaviour than 2LG. Spray-coated GNP shows the lowest friction, 40% less than UHMWPE, although with low adhesion. An increase of 10% in elastic modulus and 30% in hardness was measured for composite coatings with 2–5 wt% graphene., Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to M.D. Domínguez, N. Fernández and I. Fernández. This work has been funde(2016–79282-d by MINECO and European Regional Development Fund C5-1ENE -R), and Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric behavior and electrical conductivity of PVDF filled with functionalized single-walled carbon nanotubes

  • Puértolas, J. A.
  • García-García, J. F.
  • Pascual, F. Javier
  • González Domínguez, José Miguel
  • Martínez Fernández de Landa, María Teresa
  • Ansón-Casaos, Alejandro
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Polyvinylidene fluoride (PVDF)/single-walled carbon nanotube (SWCNT) composites are characterized by X-ray diffraction and scanning calorimetry, and studied by dielectric relaxation spectroscopy (DRS) in the temperature range of −75 to 150 °C. The effects of SWCNTs and SWCNT functionalization are analyzed in terms of α and αc relaxation, dielectric permittivity, loss tangent, and AC electrical conductivity. Some small changes are detected in α relaxation with the addition of SWCNTs, and a strong influence of SWCNTs is observed in the other relaxation αc. Below the percolation threshold, the dielectric permittivity of functionalized SWCNT composites increases compared to blank PVDF, without notable changes in the dielectric loss. All the composite systems show an electrical percolation behavior with different thresholds depending on SWCNT functionalization. Threshold concentrations remain nearly unchanged in the whole temperature and frequency ranges. The base PVDF conductivity strongly depends on temperature and frequency, while the maximum conductivity above the percolation remains nearly unchanged (∼10−2 S/m) for all the systems, temperatures and frequencies., Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to I. Fernández. This work has been funded by MINECO and European Regional Development Fund (ENE-2016-79282-C5-1-R), and Government of Aragon and European Social Fund (DGA-T50 and DGA-ESF-T66 “Grupos Consolidados”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron trap states and photopotential of nanocrystalline titanium dioxide electrodes filled with single-walled carbon nanotubes

  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Rubio-Muñoz, Cristina
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Hybrid film electrodes were made of nanocrystalline titanium dioxide (TiO2) and various percentages of single‐walled carbon nanotube (SWCNT) fillers up to 5.5 wt%. A complete photoelectrochemical study was performed in both alkaline and acidic conditions by using cyclic voltammetry, potentiostatic photocurrent measurements, and open‐circuit‐potential measurements under UV/Vis irradiation. Dark voltammograms show a transition from a capacitive to a resistive behavior in the TiO2 accumulation region upon increasing SWCNT percentages. In addition, the energy levels of deep electron traps change inside the TiO2 bandgap. The new peak positions correspond to the reduction potentials of SWCNTs, and their associated charge capacities increase with the SWCNT percentage. The modifications observed in dark experiments directly impact on the shape profile of cyclic voltammograms under irradiation. As a consequence, reduction potentials of SWCNTs appear near the cathodic peaks of certain water oxidation intermediates, and may be interacting with them. On the other hand, open‐circuit photopotentials reach maximum values for small SWCNTs percentages around 0.02 wt%. An increase in potentiodynamic and potentiostatic photocurrents is observed for the electrode containing 0.02 wt% SWCNTs, compared to reference TiO2 in acidic conditions., The authors thank the Institute for Biocomputation and Physics of Complex Systems (BIFI) for the centrifugation laboratory. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”) and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the hydration mechanism in a multi-layered graphene oxide paper by in-situ X-ray scattering

  • Rouzière, Stéphan
  • Launois, Pascale
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Paineau, Erwan
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Hydration of a multi-layered graphene oxide (GO) paper in water vapor atmosphere was studied by in-situ X-ray scattering over a wide range of relative humidity (RH). The intercalation of water molecules physically adsorbed between GO layers induces the expansion of the interlayer distance. Two regimes of adsorption are clearly evidenced according to the variation of the interlayer distance as a function of the relative humidity. The expansion of the interlayer distance is limited to ∼1 Å for RH ranging from 6 to 53%, whereas it is ∼3.5 Å for RH 75–100%. The hydration mechanism corresponds to the progressive adsorption of water molecules onto hydrophilic sites at the surface of GO layers in the low-RH regime, then an additional water monolayer is formed in the high-RH regime., EP, SR and PL benefited of a grant from the French Research National Agency under the program Investissements d’Avenir (SEDECO project, ANR-10-LABX-0035: Labex NanoSaclay). AMB and WKM acknowledge funding from the Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido TO3_17R) and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular-enhanced charge-transfer within entangled polyamide chains as the origin of the universal blue fluorescence of polymer carbon dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Ruipérez, Fernando
  • Matxain, Jon M.
  • Canton-Vitoria, Rubén
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
The emission of a bright blue fluorescence is a unique feature common to the vast variety of polymer carbon dots (CDs) prepared from carboxylic acid and amine precursors. However, the difficulty to assign a precise chemical structure to this class of CDs yet hampers the comprehension of their underlying luminescence principle. In this work, we show that highly blue fluorescent model types of CDs can be prepared from citric acid and ethylenediamine through low temperature synthesis routes. Facilitating controlled polycondensation processes, the CDs reveal sizes of 1 - 1.5 nm formed by a compact network of short polyamide chains of about ten monomer units. Density functional theory calculations of these model CDs uncover the existence of spatially separated highest occupied molecular orbital and lowest unoccupied molecular orbital located at the amide and carboxylic groups, respectively. Photoinduced charge-transfer between these groups thus constitutes the origin of the strong blue fluorescence emission. Hydrogen-bond mediated supramolecular interactions between the polyamide chains enabling a rigid network structure further contribute to the enhancement of the radiative process. Moreover, the photoinduced charge-transfer processes in the polyamide network structure easily explain the performance of CDs in applications as revealed in studies on metal ion sensing. These findings thus are of general importance to the further development of polymer CDs with tailored properties as well as for the design of technological applications., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM further acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds). EPU acknowledges Gobierno de Aragón (Grupo Reconocido DGA E19_17R) and associated EU Regional Development Funds. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ ERDF and ESF) is gratefully acknowledged for assistance and generous allocation of computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacing transition metal dichalcogenides with carbon nanodots for managing photoinduced energy and chargetransfer processes

  • Vallan, Lorenzo
  • Canton-Vitoria, Rubén
  • Gobeze, Habtom B.
  • Jang, Youngwoo
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Souza, Francis d'
  • Tagmatarchis, Nikos
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1,2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation charge transfer from an exciton dissociation path of MoS2 to CNDs, within CNDMoS2, was observed. However, such process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes., This project has received funding from the European Union‘s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" co-financed by Greece (Ministry of Economy and Development, NSRF 2014-2020) and EU (European Regional Development Fund) to N. T. and the US-NSF (grant 1401188 to F. D.) is acknowledged. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016- 79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” grant agreement 785219. W. K. M. and A. M. B. acknowledge Spanish MINECO grant ENE2016-79282-C5-1-R (AEI/FEDER, EU) and the Covernment of Aragon through project DGA-T03_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Charge-transfer characteristics in carbon nanostructure/metal oxide photoelectrodes efficiently probed by hydrogen peroxide

  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Víctor-Román, Sandra
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The charge-transfer characteristics of nanostructured carbon/TiO2 electrodes is studied by cyclic voltammetry under photoelectrochemical conditions exploiting the electrooxidation and electroreduction of H2O2 in an alkaline medium. Films of composites were prepared by physically mixing TiO2 with 5 wt.% of either singlewalled carbon nanotubes (SWCNTs) or reduced graphene oxide (rGO). In addition, a layer-by-layer rGO/TiO2 electrode was prepared. Under dark conditions, both mixed SWCNTs and rGO facilitate H2O2 reduction. Under light irradiation, the blank TiO2 electrode shows a cathodic photopotential, the SWCNT/TiO2 an anodic photopotential, and the mixed rGO/TiO2 an increased cathodic photopotential. This scenario unambiguously reveals a photoelectron acceptor behavior for SWCNTs and a photohole acceptor performance for rGO. The latter one also agrees with the photoactivity observed in the layer-by-layer electrode. Overall, the value of H2O2 redox reactions for unraveling the electron-donor or electron-acceptor character of carbon nanostructures in C/metal oxide electrodes is demonstrated., The authors thank Dr. B. Villacampa (University of Zaragoza) for the profilometer analysis, MSc. O. Sanahuja for GO preparation, and Eng. C. Rubio Muñoz for the SWCNT/TiO2 electrode preparation. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J. A.
  • Castro, Miguel
  • Morris, J. A.
  • Ríos, Ricardo
  • Ansón-Casaos, Alejandro
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (−38%) and a great reduction in the wear factor (−83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties., This work has been funded by the University of Zaragoza (UZ2015-TEC-04), the MINECO together with the European Regional Development Fund (ENE 2016-79282-C5-1-R), and the Government of Aragon together with the European Social Fund (DGA T48- 17R, DGA-T03-17R and DGA E11-17R). Special thanks are directed to the Analysis Service of Instituto de Carboquímica, ICB-CSIC, in particular to A.I. Díaz-Megías., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Control of the microstructure and surface chemistry of graphene aerogels via pH and time manipulation by a hydrothermal method

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Sanahuja-Parejo, Olga
  • Benito, Ana M.
  • Maser, Wolfgang K.
Three-dimensional graphene aerogels of controlled pore size have emerged as an important platform for several applications such as energy storage or oil–water separation. The aerogels of reduced graphene oxide are mouldable and light weight, with a porosity up to 99.9%, consisting mainly of macropores. Graphene aerogel preparation by self-assembly in the liquid phase is a promising strategy due to its tunability and sustainability. For graphene aerogels prepared by a hydrothermal method, it is known that the pH value has an impact on their properties but it is unclear how pH affects the auto-assembly process leading to the final properties. We have monitored the time evolution of the chemical and morphological properties of aerogels as a function of the initial pH value. In the hydrothermal treatment process, the hydrogel is precipitated earlier and with lower oxygen content for basic pH values (∼13 wt% O) than for acidic pH values (∼20 wt% O). Moreover, ∼7 wt% of nitrogen is incorporated on the graphene nanosheets at basic pH generated by NH3 addition. To our knowledge, there is no precedent showing that the pH value affects the microstructure of graphene nanosheets, which become more twisted and bent for the more intensive deoxygenation occurring at basic pH. The bent nanosheets attained at pH = 11 reduce the stacking by the basal planes and they connect via the borders, hence leading eventually to higher pore volumes. In contrast, the flatter graphene nanosheets attained under acidic pH entail more stacking and higher oxygen content after a long hydrothermal treatment. The gravimetric absorption capacity of non-polar solvents scales directly with the pore volume. The aerogels have proved to be highly selective, recyclable and robust for the absorption of nonpolar solvents in water. The control of the porous structure and surface chemistry by manipulation of pH and time will also pave the way for other applications such as supercapacitors or batteries., Financial support from Spanish MINECO under project ENE2016-79282-C5-1-R and its associated European Regional Development Fund, as well as from the Government of Aragon under project DGA-T66 and its associated European Social Fund is gratefully acknowledged., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Nanostructured carbon materials: synthesis and applications

  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
The family of carbon nanostructures includes a great number of forms with different properties derived from their reduced dimensionality. In particular, carbon nanotubes (CNTs) and graphene show special electronic, optical, mechanical and chemical properties that allow their potential application in new materials and devices. The real possibilities of pristine CNTs and graphene depend on their synthetic origin, which can be roughly classified into methods starting from graphite and chemical vapor deposition (CVD) processes. Applications of CNTs and graphene encompass electronics, energy devices, multifunctional composites, catalysis and sensors. Their reduced size and weight suggest potential uses in portable, wearable and mobile equipment with a high added value., This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofoam supercapacitor electrodes with enhanced performance using a water-transfer process

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Cann, Maria
  • Large, Matthew J.
  • Salvage, Jonathan P.
  • Víctor-Román, Sandra
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a highly porous, amorphous carbon nanomaterial that can be produced through the interaction of a high-fluence laser and a carbonbased target material. The morphology and electrical properties of CNF make it an ideal candidate for supercapacitor applications. In this paper, we prepare and characterize CNF supercapacitor electrodes through two different processes, namely, a direct process and a water-transfer process. We elucidate the influence of the production process on the microstructural properties of the CNF, as well as the final electrochemical performance. We show that a change in morphology due to capillary forces doubles the specific capacitance of the wet-transferred CNF electrodes., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.M.B., J.H.-F., and W.K.M. acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA-T03_17R), and associated EU Regional Development Funds. S.V.-R. thanks Spanish MINEICO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Víctor-Román, Sandra
  • Sanahuja-Parejo, Olga
  • Martínez Fernández de Landa, María Teresa
  • Villacampa, Belén
  • Benito, Ana M.
  • Maser, Wolfgang K.
9 Figuras, 2 Tablas.-- Datos suplementarios de este artículo disponibles en línea en la página web del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance., The authors thank Prof. M.T. Martínez for AFM measurements and the Analysis Service of the Instituto de Carboquímica (ICB-CSIC) for XPS measurements. This work has received funding from the Spanish MINEICO (project grant ENE 2016-79282-C5-1-R), Gobierno de Aragón(Grupo ReconocidoDGA T03_17R), and associated EU Regional Development Funds. S.V. acknowledges Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Environmental impact of the production of graphene oxide and reduced graphene oxide

  • Serrano‑Luján, Lucía
  • Víctor-Román, Sandra
  • Toledo, Carlos
  • Sanahuja-Parejo, Olga
  • Mansour, Ahmed E.
  • Abad, José M.
  • Amassian, Aram
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Urbina, Antonio
1 Tabla, 5 Figuras.-- Material suplementario disponible en línea en la página web del editor., Reduced graphene oxide (rGO) is widely seen as the most promising route for the low-cost mass production of graphene for many applications ranging from ultrathin electrodes to structural nanocomposites. The Hummers and Marcano methods are the two most successful approaches for producing high-performance rGO, but have been criticized for producing toxic emissions. We have applied life cycle assessment methodology to evaluate the environmental impacts of both production routes for GO and rGO in the context of applications requiring bulk materials or thin coatings. We find no current obstacle to the industrial scale production of graphene arising from its environmental impact. The cumulative energy demand is found to have a cap value between 20.7 and 68.5 GJ/Kg, a relatively high value; impact in other categories (such as human toxicity or resource depletion) is lower, and materials inventory does not include critical/strategic materials other than graphite itself. Our study proposes 1 kg of graphene as functional unit, and an application-specific functional unit normalized by conductivity which show that Hummers production method is far more suitable for bulk applications of graphene, with lower embedded energy per kg of graphene production, while Marcano’s production method is better suited for thin film electronic applications., This work was supported by Projects ENE2016-79282-C5-1-R and ENE2016-79282-C5-5-R funded by MINECO-Spain (including EU FEDER funds), Project 19882-GERM-15 funded by F. Séneca (Región de Murcia, Spain), and DGA Grupo Reconocido T03_17R by Gobierno de Aragón (including EU FEDER funds). L. S.-L. and C. T. are also grateful to F. Séneca for postdoctoral grant Ref. 19759/PD/15, and predoctoral grant Ref.19768/FPI/15 respectively. SVR thanks Spanish MINECO for her PhD grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Integrating water-soluble polythiophene with transition-metal dichalcogenides for managing photoinduced processes

  • Canton-Vitoria, Rubén
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
6 Figuras. Información complementaria disponible en la página web del editor., Transition-metal dichalcogenides (TMDs) attract increased attention for the development of donor–acceptor materials enabling improved light harvesting and optoelectronic applications. The development of novel donor–acceptor nanoensembles consisting of poly(3-thiophene sodium acetate) and ammonium functionalized MoS2 and WS2 was accomplished, while photoelectrochemical cells were fabricated and examined. Attractive interactions between the negatively charged carboxylate anion on the polythiophene backbone and the positively charged ammonium moieties on the TMDs enabled in a controlled way and in aqueous dispersions the electrostatic association of two species, evidenced upon titration experiments. A progressive quenching of the characteristic fluorescence emission of the polythiophene derivative at 555 nm revealed photoinduced intraensemble energy and/or electron transfer from the polymer to the conduction band of the two TMDs. Photoelectrochemical assays further confirmed the establishment of photoinduced charge-transfer processes in thin films, with distinct responses for the MoS2- and WS2-based systems. The MoS2-based ensemble exhibited enhanced photoanodic currents offering additional channels for hole transfer to the solution, whereas the WS2-based one displayed increased photocathodic currents providing supplementary pathways of electron transfer to the solution. Moreover, scan direction depending on photoanodic and photocathodic currents suggested the existence of yet unexploited photoinduced memory effects. These findings highlight the value of electrostatic interactions for the creation of novel donor–acceptor TMD-based ensembles and their relevance for managing the performance of photoelectrochemical and optoelectronic processes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 642742. Support of this work by the projects “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, and “National Infrastructure in Nanotechnology, Advanced Materials and Micro-/Nanoelectronics” (MIS 5002772), which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and cofinanced by Greece and the European Union (European Regional Development Fund) to N.T. is acknowledged. A.M.B. and W.K.M. further acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocidos DGA-T03_17R), and associated EU Regional Development Funds. E.P.U. thanks Gobierno de Aragón (Grupo de Investigación de Referencia E19_17R). The authors are thankful for SEC measurements carried out at Laboratories de Chime des Polymères Organiques (LCPO), University of Bordeaux, CNRS, Bordeaux INP. We would like to thank Dr. C. Chochos of the Institute of Biology, Medicinal Chemistry and Biotechnology/National Hellenic Research Foundation (IBMCB/NHRF) for helping with SEM images acquisition. NHRF acknowledges the General Secretariat for Research and Technology (GSRT) for the financial support through the Research Programs for Excellence under the Programmatic Agreement between Research Centers − GSRT (2015−2017), funded by Siemens SA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, Ana
  • Sanahuja-Parejo, Olga
  • Villacampa, Belén
  • Diez-Ferrer, José Luis
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Muñoz, Edgar
  • Ansón-Casaos, Alejandro
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes

  • Santidrián, Ana
  • González Domínguez, José Miguel
  • Díez-Cabanes, Valentín
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Cornil, Jérôme
  • Ros, Tatiana da
  • Kalbáč, Martin
6 Figuras. 3 Tablas., The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol. In addition, pristine and covalently functionalized SWCNTs were used for the preparation of photoactive film electrodes. The photocathodic current in the photoelectrochemical cell is consistently modulated by the doping group. These results validate the in situ Raman spectroelectrochemistry as a unique tool box for predicting the electronic properties of functionalized SWCNTs in the form of thin films and their operational functionality in thin film devices for future optoelectronic applications., The authors acknowledge financial support from the European Union FP7 RADDEL programme (ITN Marie Curie Actions PEOPLE-2011-290023) and the MEYS Inter Excellence Project no. LTC18039 and H2020-MSCA RISE Agreement no. 734834 (INFUSION). This work at the Instituto de Carboquímica has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 ‘Enabling Excellence’). The work in Mons is supported by the European Union H2020 iSwitch programme (H2020-MSCA-ITN-2014-ETN 642196). Computational resources in Mons were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J. C. is an FNRS research director. The authors acknowledge the assistance provided by the Research Infrastructures NanoEnviCz (Project No. LM2015073) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the project Pro-NanoEnviCz (Reg. no. CZ.02.1.01/0.0/0.0/16_013/0001821) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the European Union – European Structural and Investments Funds in the frame of Operational Programme Research Development and Education. J. M. G.-D. is grateful to Spanish Ministry of Science, Innovation and Universities for his ‘Juan de la Cierva – Incorporación’ research grant. A. S. is grateful to Dr Sara Costa and Dr Johan Ek Weis for fruitful discussions and helpful comments., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitive and charge transfer effects of single‐walled carbon nanotubes in TiO2 electrodes

  • Ansón-Casaos, Alejandro
  • Rubio-Muñoz, Cristina
  • Hernández-Ferrer, Javier
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 Figuras.- 1 Suplemento.- Título del pre-print: "Metallic and semiconducting carbon nanotube features observed in a hybrid titanium dioxide electrode".- This is the pre-peer reviewed version of the following article: ChemPhysChem 20: 838-847 (2019), which has been published in final form at DOI:10.1002/cphc.201900066. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The transfer of nanoscale properties from single‐walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations. The liquid fractions show clear variations in their optical absorbance spectra, indicating differences in the metallic/semiconducting character and the diameter of the SWCNTs. Also, changes in the surface chemistry and the electrical resistance are evidenced in SWCNT solid films. The starting SWCNT sample and the fractions as well are used to prepare hybrid electrodes with titanium dioxide (SWCNT/TiO2). Raman spectroscopy reflects the optoelectronic properties of SWCNTs in the SWCNT/TiO2 electrodes, while the electrochemical behavior is studied by cyclic voltammetry. A selective development of charge transfer characteristics and double‐layer behavior is achieved through the suitable choice of SWCNT fractions., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016‐79282‐C5‐1‐R), the Government of Aragon (T03‐17R), and the European Commission (H2020‐MSCA‐ITN‐2014‐ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reduced graphene oxide aerogels with controlled continuous microchannels for environmental remediation

  • Rodríguez Mata, Vanesa
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
9 Figuras.- Información suplementaria., 3D porous graphene microarchitectures with aligned and continuous channels are of paramount interest for several applications such as pollutant removal, energy storage, or biomedical engineering. For these applications, an accurate control over the pore microstructure is of capital importance. Freeze casting is a well-stablished technique to prepare graphene aerogels with unidirectional channels. This technique is typically applied to plain GO colloids, leading to discontinuous microchannels. Herein we have carried out the freeze process starting directly with partially reduced graphene (rGO) hydrogels prepared by a prior hydrothermal treatment in autoclave. This approach leads to the formation of aerogels with aligned and continuous microchannels, enabled by an intermediate cross-linking degree of the rGO nanosheets, carefully controlled by keeping the time of the prior hydrothermal process between the thresholds of 45–75 min. To the best of our knowledge, the effect of the degree of cross-linking in the freeze casting process is not yet reported. The resulting rGO aerogels with highly aligned microchannel structure reveal superior properties over its isotropic counterpart of randomly oriented pores for the absorption of nonpolar solvents and the selective adsorption of an aromatic compound dissolved in an alkane. Our combined hydrothermal freeze casting approach thus affords aligned microchannel rGO aerogels of enormous potential for environmental remediation., Financial support from Spanish Ministry MINECO (Project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale J-aggregates of poly(3-hexylthiophene): Key to electronic interface interactions with graphene oxide as revealed by KPFM

  • Palacios-Lidón, E.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Colchero, J.
1 Esquema, 4 Figuras, The performance of organic thin film optoelectronic devices strongly relies on the nanoscale aggregate structure of the employed conjugated polymer. Their impact on electronic interface interactions with adjacent layers of graphene, widely reported to improve the device characteristics, yet remains an open issue, which needs to be addressed by an appropriate benchmark system. Here, we prepared discrete ensembles of poly(3-hexylthiophene) nanoparticles and graphene oxide sheets (P3HTNPs–GO) with well defined aggregate structures of either J- or H- type and imaged their photogenerated charge transfer dynamics across their interface by Kelvin probe force microscopy (KPFM). A distinctive inversion of the sign of the surface potential and surface photovoltage (SPV) demonstrates that J-aggregates are decisive for establishing charge transfer interactions with GO. These enable efficient injection of photogenerated holes from P3HTNPs into GO sheets over a range of tens of nanometers, causing a slow SPV relaxation dynamics, and define their operation as efficient hole-transport layer (HTL). Conversely, H-type aggregates do not facilitate specific interactions and entrust GO sheets the role of charge-blocking layers (CBL). The direct effect of P3HT’s aggregate structure on GO’s functional operation as HTL or CBL thus establishes clear criteria towards the rational design of improved organic optoelectronic devices., This work has received funding from the Spanish MINECO (project grants ENE 2016-79282-C5-1-R and ENE 2016-79282-C5-4-R) and associated EU Regional Development Funds. A.M.B., E.I., and W.K.M. acknowledge funding from European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowksa-Curie grant agreement no. 642742. They also acknowledge the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A versatile room-temperature method for the preparation of customized fluorescent non-conjugated polymer dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 Figuras, 2 Tablas.-- Material suplementario disponible en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We present a general procedure for the synthesis and in situ functionalization of highly fluorescent non-conjugated polymer dots, by exploiting the room-temperature carbodiimide-mediated condensation between citric acid and amines. The versatility of this method is proved by the preparation and characterization of a broad set of fluorescent nanoparticles with customized polymer structures and functional groups., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. A.M.B., W.K.M acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds. E.P.U acknowledges the Gobierno de Aragón (Grupo Reconocido DGA E19-17R) and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlling the surface chemistry of graphene oxide: Key towards efficient ZnO-GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
12 Figures, 3 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene oxide (GO) and related materials are widely reported to enhance the photocatalytic activity of zinc oxide. However, the origin of the observed performance improvements remains elusive and studies contributing to a deeper understanding of this critical issue are largely missing. In this work, we have prepared a set of benchmark ZnO-GO hybrid materials in order to systematically put under closer scrutiny the influence of the surface chemistry of GO on the photocatalytic degradation of methylene blue. The set of ZnO-GO hybrids has been synthesized in an ultrasonication process involving ZnO nanoparticles obtained in a microwave synthesis process and GO with three distinct oxidation degrees, employed in three different loading fractions. Structural and physical-chemical characterization by XRD, FTIR, Raman, UV–vis, photoluminescence and spectroscopy and XPS, consistently demonstrate the importance of the surface chemistry of GO for establishing photo-induced charge-transfer interface interactions with ZnO, facilitating the enhancement of the catalytic activity of the ZnO-GO catalyst. Optimized interface interactions thus enabled the design of a ZnO-GO catalyst exhibiting a conversion rate of 80% obtained in a time of 70 min and at a catalyst concentration of only 0.045 mg/mL., This work was financially supported by the Spanish MINEICO (project grant ENE 2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds. This work has been also partially supported by Project POCI-01-0145-FEDER-006984 – Associate Laboratory LSRE-LCM funded by European Regional Development Fund (ERDF) through COMPETE2020-Programa Operacional Competitividade e Internacionalização (POCI) – and by national funds through FCT-Fundação para a Ciência e a Tecnologia. S. Víctor-Roman acknowledges Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds) and for her research stay scholarship in Portugal (EEBB-I-18-12785). J.M. González-Domínguez acknowledges Spanish Ministry of Science, Innovation and Universities for his 'Juan de la Cierva - Incorporación' grant (IJCI-2016-27789)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Percolating metallic structures templated on laser-deposited carbon nanofoams derived from graphene oxide: applications in humidity sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Víctor-Román, Sandra
  • Peláez-Fernández, Mario
  • Nicolosi, Valeria
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
5 Figuras.-- Información complementaria disponible en línea en la página web del editor, Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF., Graham Booth’s work is highly appreciated, helping to set up the deposition system. This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement 642742 as well as from EU H2020 program “Graphene Flagship” (Grant Agreement 696656). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (Grant MAT2016-79776-P, (AEI/FEDER, UE)), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant E/26). A.M.B and W.K.M gratefully acknowledge the financial support from Spanish MINECO and AEI (Project ENE2016-79282-C5-1-R and associated EU Regional Development Funds) and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds). S.V.-R. thanks Spanish MINECO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of argon ion sputtering on the surface of graphene/polyethylene composites

  • Ansón-Casaos, Alejandro
  • Aylón Marquina, Elvira
  • Ríos, Ricardo
  • Puértolas, J. A.
13 Figures, 1 Table.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Argon ion sputtering at various energies in the range of 500–5000 eV is performed on polymer composites of ultra-high molecular weight polyethylene (UHMWPE) with 4.6 wt% graphene nanoplatelets (GNPs). X-ray photoelectron spectroscopy (XPS) shows that irradiation above 3000 eV causes an abrupt transition from tetrahedral sp3 into planar sp2 carbon in the blank polyethylene surface. This graphitization process, as well as the formation of certain oxygen groups after the subsequent exposure to air, is delayed by graphene in the composites. Besides, both XPS and Raman spectroscopy indicate that a part of the sp2 graphene network is transformed into sp3 carbon defects by irradiation. Surface hardness and Young's modulus increase by 30–100% in blank polyethylene and the composites upon irradiation. The surface electrical resistance of polyethylene decreases from 1015 to 108 Ω by sputtering at 5000 eV. Composites that are consolidated at low temperature (175 °C) experience a transition from insulating (1015 Ω) to conducting (104 Ω) in a narrow range of Ar+ sputtering energies, while for a high consolidation temperature (240 °C) the transition is not observed. This research provides information on the induced interaction mechanisms between graphene and a polymer matrix upon ion beam irradiation., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016-79282-C5-1-R), and the Government of Aragon together with the European Social Fund (DGA ESF T48-17R and T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intercalated water in multi-layered graphene oxide paper: an X-ray scattering study

  • Rouzière, Stéphan
  • Núñez, Jesús David
  • Paineau, Erwan
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Launois, Pascale
X-ray scattering (XRS) experiments have been performed on multi-layered graphene oxide (GO) paper. GO can be easily hydrated as water naturally intercalates in the hydro­philic nanostructure. The effect of the intercalated water on the XRS signals is measured during dehydration under thermal treatment in the temperature range 298–473 K as well as during hydration under saturated water vapour pressure. A simple modelling of the XRS signals by taking into account the presence and the type of intercalated water (bound water or physisorbed water) is introduced. It allows an explanation of the variations of intensity and position of XRS reflections observed experimentally., EP, SR and PL benefited of a grant from the French Research National Agency under the program Investissements d’Avenir (SEDECO project, ANR-10-LABX-0035: Labex NanoSa-clay). AMB and WKM acknowledge funding from the Spanish Ministry MINECO under projects ENE2013-48816-C5-5-R and ENE2016-79282-C5-1-R with their associated European Regional Development Funds, and from the Government of Aragon under Consolidated Group programme DGA-T66-GCNN and the associated European Social Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning aggregation and charge transfer of poly(3-hexylthiopene) nanoparticles by graphene oxide

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la International Conference on Carbon Nanoscience and Nanotechnology (NanoteC), celebrada en Nantes (Francia) del 30 de agosto al 2 de septiembre de 2017., Nanoparticles derived from conjugated polymers have attracted widespread attention for a number of reasons such as their easy synthesis, tuneable properties, less toxicity and environmentally friendly processing conditions for device fabrication. Besides, their properties can be enhanced by preparing composites with carbon nanomaterials. Poly-3-hexyl thiophene (P3HT), the archetype of conducting polymers, is characterized by the presence of quasi-crystalline domains (i.e. H, J or H-J aggregates) defining the electro-optical properties. However, reliable control of these nanoscale aggregates plays an essential role to tune charge transport and charge separation properties. In this work, we report the self-assembly of novel conjugated polymer nanoparticle/graphene oxide (P3HTNPs/GO) composites using a re-precipitation technique. The resulting composites are stable in aqueous dispersions and can be processed directly instead of usual hazardous chlorinated solvents. Photophysical studies reveals that the internal aggregate structure of the P3HTNPs is affected by GO and can be tuned by varying the amount of GO. Meanwhile, Raman spectroscopy and cyclic voltammetry reveal that the observed changes in the P3HTNP aggregate structure of the P3HTNPs/GO composite are accompanied by a charge transfer process taking place at the interface between P3HTNPs and the GO sheets. Our synthesis approach leading to novel P3HTNPs/GO composites with tuneable electro-optical properties and environmental-friendly processing characteristics thus may provide a base for the development of further functional nanomaterials for variety of applications for photovoltaic or sensing applications., EU H2020 MSC ITN 642742. MINECO (ENE2016-79282-C5-1-R). DGA-T66-GCNN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Novel materials for optoelectronic devices: Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Maser, Wolfgang K.
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Colchero, J.
  • Palacios-Lidón, E.
  • Kalbáč, Martin
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
Resumen del trabajo presentado al Nano Application Workshop, celebrado en Munich (Alemania) del 19 al 21 de septiembre de 2018., Conjugated polymers (CPs) constitute the base of organic thin film optoelectronic devices, such as organic photovoltaic solar cells (OSCs) and organic light emitting devices (OLEDs). Deposited onto large areas of any shape they critically contribute to the development of self-powered, smart and ubiquitous communication platforms. Operational performance and fabrication from 'green' solutions compatible with large-area coating or printing technologies are key requirements for their commercial implementation. Applying self-assembly strategies, CPs can be prepared in the form of water dispersible nanoparticles being of actual interest for achieving improved device performance. In this work we present novel pathways for the design of improved organic thin film optoelectronic devices by marrying nanoparticles of CPs (CPNPs) with 2D sheets of graphene oxide (GO). Using poly(3-hexylthiophene) (P3HT) as benchmark CP, we demonstrate the game-changing role of GO in tuning the excitonic aggregate behavior of P3HTNPs and the efficient formation P3HTNPs-GO charge-transfer complexes. Thin films thereof reveal improved separation of photo-generated charge carriers. Integration into a photoelectrochemical device shows significantly improved photoactivity. Moreover, the thin films reveal unique molecular switching behavior. The possibility to overcome external performance limitations and to employ 'green' processing technologies offers exciting possibilities for further progress in the field of organic thin film optoelectronic devices., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R), Government of Aragón (Recognized Group DGA-T03-17R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon dots on TiO2 for perovskite photovoltaics, methanol oxidation and water splitting

  • Ansón-Casaos, Alejandro
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
Talk delivered in 7th International conference on Advanced Hydrogen Energy, ANM conference series 2019, at University of Aveiro, in Aveiro, Portugal, 17-19 July 2019.- 1 Figura, Carbon dots (CDs) are a class of fluorescent nanoparticles including an extremely rich variety of structures and functional groups. Interestingly, not only the physicochemical properties are affected by the nature of the CD structure, but also their optical behavior. Fluorescence in CDs shows particular characteristics of strong intensity and wavelengths in the visible region. Consequently, an interesting issue arises on how structurally-different CDs modify the electron transport and photoactivity of semiconductor oxides, in particular TiO2., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards high-efficient microsupercapacitors based on reduced graphene oxide with optimized reduction degree

  • Rodríguez Mata, Vanesa
  • Hernández-Ferrer, Javier
  • Carrera Jiménez, Clara
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
6 Figuras, 5 Tablas.-- Información suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced graphene oxide aerogels synthetized using different times of hydrothermal treatment have been tested as raw material to prepare electrochemical supercapacitors. The gravimetric electrochemical capacitance measured using 1 M Na2SO4 as electrolyte was maximized for aerogels that underwent 45 min of hydrothermal treatment. The aerogels synthetized for longer durations of hydrothermal treatment exhibited higher electrical conductivity but the gravimetric capacitance drops dramatically due to an increasing resistance to diffusion of the electrolyte ions. The impeded diffusion is boosted by the intensified crosslinking between graphene sheets, which narrows the pores between them in the prepared electrode. The rGO aerogel attained for 45 min of hydrothermal treatment provided a high gravimetric capacitance of 400 F/g and 100 F/g at 50 A g−1 for three-electrode and two electrodes configuration, respectively, as well as good cyclic stability, competing with other similar carbon materials. Activation pretreatments or adding a second component (glucose, Mn, Fe, CNT) did not provide significant change of capacitance respect to pristine rGO aerogel., Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R(AEI/FEDER,UE)) and Gobierno de Aragón (Grupo Reconocido DGA T03_17R, including EU Regional Development Funds FEDER,UE) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unique properties and behavior of non-mercerized type-II cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, E.
  • Mesonero, José Emilio
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 Esquemas,7 Figuras.-- Información suplementaria disponible en la página web del editor.- This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Biomacromolecules 2019,20,8,3147-3160, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.biomac.9b00722, Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT–NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT–NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells., J.M.G.-D. and E.C. acknowledge Spanish MINEICO for their Juan de la Cierva Incorporación research contract (ref IJCI-2016-27789) and PhD fellowship (FPI, ref BES-2017-080020, and associated EU Social Funds), respectively. This work has received funding from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) and the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds). Additional funding from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfonated hydrothermal carbons from cellulose and glucose as catalysts for glycerol ketalization

  • Fernández, Pablo
  • Fraile, José M.
  • García-Bordejé, José Enrique
  • Pires, Elísabet
12 Figuras, 1 Tabla.-- © The Author(s)., Solketal is one of the most used glycerol-derived solvents. Its production via heterogeneous catalysis is crucial for avoiding important product losses typically found in the aqueous work-up in homogeneous catalysis. In this work, we present a study of the catalytic synthesis of solketal using sulfonated hydrothermal carbons (SHTC). They were prepared from glucose and cellulose resulting in different textural properties depending on the hydrothermal treatment conditions. The sulfonated hydrothermal carbons were also coated on a graphite microfiber felt (SHTC@GF). Thus, up to nine different solids were tested, and their activity was compared with commercial acidic resins. The solids presented very different catalytic activity, which did not correlate with their physical-chemical properties indicating that other aspects likely influence the transport of reactants and products to the catalytic surface. Additionally, the SHTC prepared from cellulose showed better reusability in batch reaction tests. This work also presents the first results for the production of solketal in a flow reactor, which opens the way to the use of SHTC@GF for this kind of reactions., Financial support from Ministerio de Ciencia, Innovación y Universidades (project RTI2018-093431-B-I00 and ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Group E37_17R) co-funded by FEDER 2014-2020 “Construyendo Europa desde Aragón” is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cells

  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
2 Esquemas, 5 Figuras.-- This is the pre-peer reviewed version of the following article: "In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cell", Chemistry - an Asian Journal: 2019, which has been published in final form at https://doi.org/10.1002/asia.201901371. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions"., A facile strategy for the controllable growth of CdS nanoparticles at the periphery of MoS 2 en route the preparation of electron donor‐acceptor nanoensembles is developed. Precisely, the carboxylic group of α‐lipoic acid, as addend of the modified MoS 2 obtained upon 1,2‐dithiolane functionalization, was employed as anchor site for the in‐situ preparation and immobilization of the CdS nanoparticles in an one‐pot two‐step process. The newly prepared MoS 2 /CdS hybrid material was characterized by complementary spectroscopic, thermal and microscopy imaging means. Absorption spectroscopy was employed to register the formation of MoS 2 /CdS, by observing a broad shoulder centered at 420 nm due to CdS nanoparticles, while the excitonic bands of MoS 2 were also evident. Moreover, based on the efficient quenching of the characteristic fluorescence emission of CdS at 725 nm by the presence of MoS 2 , strong electronic interactions at the excited state between the two species within the ensemble were identified. Photoelectrochemical assays of MoS 2 /CdS thin‐film electrodes revealed a prompt, steady and reproducible anodic photoresponse during repeated on‐off cycles of illumination. A significant zero‐current photopotential of ‐540 mV and an anodic photocurrent of 1 μA were observed, underlining improved charge‐separation and electron transport from CdS to MoS 2 . The superior performance of the charge‐transfer processes in MoS 2 /CdS is of direct interest for the fabrication of photoelectrochemical and optoelectronic devices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which Submitted_Manuscript is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics

  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Grasa, Laura
  • González Domínguez, José Miguel
  • Martínez Fernández de Landa, María Teresa
  • Ballesteros, Belén
  • Urriolabeitia, Esteban P.
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
10 Figures, 5 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method. Nanoparticles that were prepared by acid or sonochemical treatments from graphite keep a crystalline core and can be classified as graphene quantum dots. The electrochemically produced nanoparticles do not clearly show the graphene core, but it is made of heterogeneous aromatic structures with limited size. The polycondensation nanoparticles do not have C=C double bonds. The type of functional groups on the carbon backbone and the optical properties, both absorbance and photoluminescence, strongly depend on the nanoparticle origin. The selected types of nanoparticles are compatible with human intestinal cells, while three of them also show activity against colon cancer cells. The widely different properties of the nanoparticle types need to be considered for their use as diagnosis markers and therapeutic vehicles, specifically in the digestive system., This work has been funded by MINEICO under project ENE2016-79282-C5-1-R, the Gobierno de Aragón (Grupo Reconocido T03-17R + E19-17R + A02-17R) and respective associated EU Regional Development Funds. J.M.G.-D. greatly acknowledges Spanish Ministry of Science, Innovation and Universities (MICINN, formerly MINEICO) for his “Juan de la Cierva – incorporación” grant (Ref. UCI-2016-27789). Special thanks are directed to Ms. L. Martinez for helping with the W-GQD preparation, the Analysis Service at Instituto de Carboquímica ICB-CSIC and the Electron Microscopy Service at the University of Zaragoza. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ru supported on N-doped reduced graphene oxide aerogels with different N-type for alcohol selective oxidation

  • Sánchez-García, Joel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
5 Figures, 2 Tables.-- Supplementary information available.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced graphene oxide aerogels doped with nitrogen have been prepared via two different strategies, namely, direct doping of rGO nanosheets with NH3 (GANH3) and coating the rGO nanosheets with an N-containing amorphous carbon derived from polydopamine (GADA). Both methods lead to comparable N/C ratios (3.4–4.7 %) but the relative contribution of quaternary nitrogen is 30 % for GADA while only 15 % for GANH3. Moreover, the N is incorporated within graphene lattice for GANH3 while it is within an amorphous carbon layer on top of graphene nanosheets for GADA. The Ru catalyst supported on the aerogels exhibited very distinct performance in the selective oxidation of benzyl alcohol depending on the support material despite having similar Ru particle size. The best performance for 5 wt% Ru on GADA can be explained by the larger reduction extent of Ru and the more hydrophobic surface. The open macroporosity of the aerogel makes it an excellent platform for using as structured catalyst in a continuous flow process., Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CO2 reduction to CH4 using Ru on carbon nanostructures and on alumina coated monoliths, CO2 reduction to CH4 using carbon nanostructures and alumina coated monoliths as metal catalyst support

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
Poster presented at the 14th EuropaCat-European Congress on Catalysis (EuropaCat 2019), 8-23 August 2019 in Aachen, Germany., Herein, we have supported Ru nanoparticles on carbon nanotubes (CNTs), carbon nanofibers (CNFs) and nitrogen-doped carbon nanofibers (N-CNF). The 5% Ru catalysts supported on CNF and N-CNF have been benchmarked against 5% Ru on CNT and on conventional alumina support (Ru/Al2O3). To study the structure-performance relationship, the catalysts have been exhaustively characterized by TEM and by transient techniques such as temperature programmed desorption (TPD) and temperature programmed surface reaction (TPSR). In a second part, cordierite monoliths have been washcoated with alumina. Subsequenly, Ni, Ru and bimetallic catalyst have been impregnated and tested in reaction., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalized carbon dots on TiO2 for perovskite photovoltaics and stable photoanodes for water splitting

  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Vallan, Lorenzo
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
10 figures, 1 table, Various types of fluorescent carbon nanoparticles, often called carbon dots (CDs), are synthesized by different polycondensation methods: microwave irradiation, hydrothermal conditions or solution chemistry at ambient temperature with subsequent chemical functionalization. The CDs are deposited on TiO2 films to be probed as electron transport layers in perovskite photovoltaics and the anode for photoelectrochemical water splitting. Nitrogen CDs, which do not contain oxygen, lead to an increase of around 50 mV in the open circuit voltage of perovskite solar cells. All the CD types produce an improved photocurrent in water splitting, particularly CDs that are functionalized with thiol groups and butyl chains. It is demonstrated that the modified electrode is stable under continuous operation. Other electrochemical characteristics of the electrode, such as the voltammogram shape, onset potentials and open circuit potentials, remain nearly unchanged upon the deposition of CDs. Only the incident photon to current conversion efficiency improves clearly, extending the absorption range by around 20 nm towards longer wavelengths. This study provides new data about mechanisms and electrode arrangements for improving the performance of n-type semiconductors in photovoltaic cells and photoelectrochemical hydrogen production., This work has been funded by the Spanish MINEICO under the project ENE2016-79282-C5-1-R (AEI/FEDER, UE), the Government of Aragón (Grupo reconocido T03-17R) and associated EU Regional Development Funds (DGA/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Sanahuja-Parejo, Olga
  • Víctor-Román, Sandra
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 Tablas, 7 Figuras.-- Material suplementario disponible en línea en la página web del editor., Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron-Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions., This work has been funded by the Spanish MINEICO under the project ENE 2016-79282-C5-1-R (AEI/FEDER, UE), the Government of Aragón (Grupo reconocido T03-20R) and associated EU Regional Development Funds (DGA/FEDER, UE). SVR thanks Spanish MINEICO for her PhD grant (BES2014-068727 and associated EU Social Funds). J.M.G.-D. greatly acknowledges Spanish Ministry of Science, Innovation and Universities (MICINN, formerly MINEICO) for his “Juan de la Cierva – incorporación” grant (Ref. JCI-2016-27789). We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 4 tables, Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications., This research was funded by the Spanish MINEICO under the project ENE 2016-79282-C5-1-R (AEI/FEDER, UE), and the Government of Aragón (Grupo reconocido T03-20R, DGA/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with adjustable porosity as mesostructured support for catalysts and electrocatalysts

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
The translation of the properties of graphene to 3-D structures is of a great interest for catalysis, electrocatalysis and energy storage. However, graphene is prone to stacking to by van der Waals forces losing its properties and surface area Graphene aerogels can circumvent the stacking problem keeping interesting properties such as high surface area, open macroporosity for the diffusion of bulky molecules, flexibility, mechanical resistance, thermal and electrical conductivity. Here it is shown the possibility to control the porosity, mesostructure and surface chemistry of reduced graphene oxide aerogels and examples are shown about its use as catalyst and electrocatalyst support., Financial support from European Commission (FREECATS project, FP7 Grant agreement nº 280658), Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide and poly(3-hexylthiophene) nanoscale interface interactions probed by KPFM

  • Palacios-Lidón, E.
  • Colchero, J.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Graphene oxide (GO) is a chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for ease of processing from water dispersions. We recently have shown that sheets of graphene oxide critically affect the aggregate structure of water dispersible nanoparticles P3HTNPs and thus the performance of optoelectronic thin film devices. In this work we elucidate the photogenerated charge tranfer dynamics of (P3HTNPs-GO) ensembles with defined aggregate structure across their interface by Kelvin Probe Force microscopy (KPFM)., EU Horizon 2020 research and innovation programme Marie Sklodowska-Curie grant agreement No 642742. Project ENE2016-79282-C5-1-R. Grupo Reconocido DGA T03_17R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Formation of P3HT aggregates enhanced by type-II cellulose nanocrystals

  • Colom, E.
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Conductive polymers are one of the most studied structures for optoelectronic devices. Poly- 3-hexylthiophene (P3HT) is especially interesting because of its charge transport ability and photocurrent generation in solar cells.1 On the other hand, nanocrystalline cellulose (NCC), obtained from the most abundant source in nature, is a very promising new material with outstanding properties.2 Moreover, NCC can be synthetized in different crystalline forms, namely, types I and II. While type I has been widely studied, works with type II NCC are scarcely reported, despite having great potential for many applications.3 Previous studies have noticed the increasing formation of J-aggregates in some hybrid materials when P3HT nanoparticles are synthetized in presence of other nanostructures like graphene oxide4. In this work, the morphological changes result in different optical and electronic properties, due to the aggregates system favoring the charge separation. We have synthetized a new hybrid material, consisting on P3HT-NCC(II) nanoparticles. These nanostructures obtained by a reprecipitation method have revealed themselves even of higher efficiency on inducing the formation of J-aggregates in the polythiophene even at moderate concentration of NCC(II) (Fig 1). This methodology could pave the way for the development of new advanced materials for photocurrent generation devices., Project ENE2016-79282-C5-1-R, PhD contract FPI: BES2017-080020 / JdC grant: IJCI-2016-27789. Grupo Reconocido DGA T03_17R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene aerogel with unidireccional pores of tailored size and its application as hydrophobic absorbent and as support for catalytically active nanodiamonds

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 figures.-- Work presented at the HeteroNanoCarb Conference 2017, 11th-15th December, Benasque (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, supra-flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactor platforms and solar cells.[1-2] One way to prepare 3D aerogels is starting from GO sols and its gelation under hydrothermal conditions [2]. The functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimate phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing method) to achieve a control over the pore orientation and size of graphene aerogels. The mechanical properties of the aerogels varied from more rigid to flexible materials. In addition, we have been able to synthetize graphene aerogels with aligned channels resembling honeycomb structures (Figure 1). As a proof of concept, the materials have been tested as hydrophobic absorbents of organic compound and as support for nanodiamonds (Figure 2). The nanodiamonds supported on graphene aerogels have been tested for the selective dehydrogenation of propane providing an excellent performance., The financial support from Spanish Ministry MINECO and the European Regional Development Fund (project ENE2016-79282-C5-1-R) and Government of Aragon (Consolidated Group DGAT66).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene aerogels as catalyst support for nanodiamods and metal nanoparticles

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
Talk delivered at the 8th International Symposium on Carbon for Catalysis CarboCatVIII, 2018, 26-29 june, Porto (Portugal), Graphene aerogels have emerged as a promising flow-through reactor for adsorption and catalysis due to its high porosity, fluidynamic characteristics and amphiphilic character. Despite these advantages, the application of graphene foams in catalysis is still very scarce. One of the challenges when preparing metal catalyst on graphene is stabilising metal nanoparticles on the low defective graphene surface. To enhance the stable attachment of metal nanoparticles different approaches can be used such as, e.g. the introduction of defects or doping. The preparation of graphene from GO reduction has the advantage that GO has many surface functional groups for doping and the creation of defects. Herein, we have prepared graphene aerogels by hydrothermal treatment of graphene oxide (GO) dispersions in an autoclave. In the autoclave a process of reduction-auto-assembly of GO nanosheets takes place leading to phase separation and precipitation of a hydrogel. The hydrogel transforms into an aerogel after freeze drying. The pore size and surface chemistry of the resulting aerogel can be controlled by manipulating the pH of the synthesis and the time of hydrothermal treatment [4]. The preparation at pH=11 leads toaerogels with higher pore volume (~200 cm3g-1 consisting mainly of macropores and more reduced than at pH=3. The graphene nanosheets have a flat morphology at pH=3 while they are bentand more reduced at pH=11, leading to more open porosity (Figure 1). In addition, aerogels with a 7% of nitrogen mainly of pyridinic-type have been prepared at pH=11 by adding NH3., The financial support from Spanish Ministry MINECO and the European Regional Development Fund (project ENE2016-79282-C5-1-R), and Regional Government of Aragon (DGA-ESF-T66 Grupo Consolidado) are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mono- and bimetallic metal catalysts based on Ni and Ru supported on alumina-coated monoliths for CO2 methanation

  • Bustinza, Ainhoa
  • Frías, Marina
  • Liu, Yuefeng
5 figures, 4 tables.-- Supplementary information available, Structured reactors such as monoliths have some favorable properties over fixed bed reactors such as low pressure drop, ease in handling and fast heat and mass transfer. Some of these properties make them advantageous reactors for the catalytic reduction of CO2 contained in post-combustion gases. Mono- and bimetallic Ru and Ni catalysts on alumina-washcoated cordierite monoliths have been scrutinized for CO2 methanation. The methodology for the preparation of NiRu bimetallic catalysts has been optimized to obtain an outperforming monolithic catalyst. The catalyst providing the highest CH4 productivity corresponds to a bimetallic NiRu catalyst with a small amount of Ru, prepared by consecutive impregnation of Ni and Ru precursors with an intermediate reduction step. This catalyst consists of 2–4 nm Ni nanoparticles interspersed with atomic Ru homogeneously distributed on the alumina coating. This nanostructure endows the catalyst with the highest density of basic sites of medium strength and the highest degree of Ni oxidation in the passivated catalyst compared to the other tested catalysts. The bimetallic monolithic catalyst afforded a stable CO2 methanation activity at high space velocities and with a low pressure drop, reducing energy consumption., The Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged. The DICP team acknowledges the National Natural Science Foundation of China (21872144 and 21972140), Liaoning Revitalization Talents Program (XLYC1907053) and CAS Youth Innovation Promotion Association (2018220) for financial support. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modification of physicochemical properties and boosting electrical conductivity of reduced graphene oxide aerogels by postsynthesis treatment

  • Carrera Jiménez, Clara
  • González Domínguez, José Miguel
  • Pascual, F. Javier
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
13 figures, Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 °C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications., Financial support from Spanish Ministry MICINN under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER), Gobierno de Aragón (Grupo reconocido DGA T03_17R, DGA/FEDER/UE), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalt-doped ZnO nanorods coated with nanoscale metal-organic framework shells for water-splitting photoanodes

  • Galán, Alejandro
  • Sivan, Aswathi K.
  • Hernández-Ferrer, Javier
  • Bowen, Leon
  • Di Mario, Lorenzo
  • Martelli, Faustino
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Chaudhry, Mujeeb Ullah
  • Gallant, Andrew
  • Zeze, Dagou A.
5 figures.-- Supporting information available.-- This ACS article is provided under the terms of this ACS AuthorChoice/Editors’ Choice via Creative Commons CC-BY agreement: https://pubs.acs.org/page/policy/authorchoice_ccby_termsofuse.html, Developing highly efficient and stable photoelectrochemical (PEC) water-splitting electrodes via inexpensive, liquid phase processing is one of the key challenges for the conversion of solar energy into hydrogen for sustainable energy production. ZnO represents one the most suitable semiconductor metal oxide alternatives because of its high electron mobility, abundance, and low cost, although its performance is limited by its lack of absorption in the visible spectrum and reduced charge separation and charge transfer efficiency. Here, we present a solution-processed water-splitting photoanode based on Co-doped ZnO nanorods (NRs) coated with a transparent functionalizing metal–organic framework (MOF). The light absorption of the ZnO NRs is engineered toward the visible region by Co-doping, while the MOF significantly improves the stability and charge separation and transfer properties of the NRs. This synergetic combination of doping and nanoscale surface functionalization boosts the current density and functional lifetime of the photoanodes while achieving an unprecedented incident photon to current efficiency (IPCE) of 75% at 350 nm, which is over 2 times that of pristine ZnO. A theoretical model and band structure for the core–shell nanostructure is provided, highlighting how this nanomaterial combination provides an attractive pathway for the design of robust and highly efficient semiconductor-based photoanodes that can be translated to other semiconducting oxide systems., A.G.-G., A.K.S., F.M., A.G., D.A.Z., and D.A. acknowledge funding received from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 722176. W.K.M., A.M.B., and J.H.F. acknowledge financial support from Spanish Ministry MINEICO under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE y DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC aerogels and xerogels are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a non-polar solvent, taking advantage of the dry BC sorption capacity., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical properties and carrier dynamics in Co-doped ZnO nanorods

  • Sivan, Aswathi K.
  • Galán, Alejandro
  • Di Mario, Lorenzo
  • Tappy, Nicolas
  • Hernández-Ferrer, Javier
  • Catone, Daniele
  • Turchini, Stefano
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Escobar Steinvall, Simon
  • Fontcuberta i Morral, Anna
  • Gallant, Andrew
  • Zeze, Dagou A.
  • Atkinson, Del
  • Martelli, Faustino
8 figures.-- Supplementary information available., The controlled modification of the electronic properties of ZnO nanorods via transition metal doping is reported. A series of ZnO nanorods were synthesized by chemical bath growth with varying Co content from 0 to 20 atomic % in the growth solution. Optoelectronic behavior was probed using cathodoluminescence, time-resolved luminescence, transient absorbance spectroscopy, and the incident photon-to-current conversion efficiency (IPCE). Analysis indicates the crucial role of surface defects in determining the electronic behavior. Significantly, Co-doping extends the light absorption of the nanorods into the visible region, increases the surface defects, shortens the non-radiative lifetimes, while leaving the radiative lifetime constant. Furthermore, for 1 atomic % Co-doping the IPCE of the ZnO nanorods is enhanced. These results demonstrate that doping can controllably tune the functional electronic properties of ZnO nanorods for applications., WKM, AMB acknowledge Spanish MINEICO (ENE2016-79282-C5-1-R (AEI/FEDER, UE)), MICINN (PID2019-104272RB-C51/AEI/10.13039/501100011033), CSIC (2019AEP010) and Gobierno de Aragón (Grupo Reconocido DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Assessment of charge transfer phenomena in nanostructured composite materials using photoelectrochemical methods

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Photoelectrochemistry is a valuable technique for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology., MINEICO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE), European Union (H2020-MSCA-ITN-2014-ETN 642742 ), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabrication of thin conductive films made up of SWCNT aqueous inks through green approaches

  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, at Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Conductive inks development is currently a field of study for electronic applications, including energy devices and sensors, where metal nanoparticles (MNPs) have most commonly been used. However, MNPs present important disadvantages, typically the scarcity of noble metals (Au, Ag, Pt) and the easy oxidation of the rest (Cu, Al). Carbon nanomaterials, such as single-walled carbon nanotubes (SWCNTs), are regarded as an alternative for the fabrication of conductive inks, because of their properties: electronic and thermal conductivity, 1D structure, surface functionalization, and the dispersion in many surfactants and some organic solvents, which are unfortunately highly toxic and unsustainable.1 New biofriendly and sustainable dispersing agents are on demand, and also the use of water as the liquid medium for conductive inks. Nanocellulose, an emerging 'green' nanomaterial, posseses many desirable features: hydrophilicity, sustainability, abundance and exellent performance as dispersing agent, which makes it a promising candidate as an alternative to toxic surfactants and hazardous organic solvents. 2 Herein, we report the facile, non-toxic and environmentally friendly fabrication of aqueous and stable conductive inks made up of SWCNTs, using nanocrystalline cellulose as dispersant agent. 3 The conductive ink was deposited by optimized spray coating techniques to fabricate the thin films, which were characterized in terms of electrical properties., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE) and Government of Aragon (Grupo de Referencia DGA-T03_17R, FEDER, UE)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

GO-ing on with graphene oxide

  • Maser, Wolfgang K.
  • Benito, Ana M.
HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Graphene oxide (GO) is an elusive but highly fascinating tunable nanostructure. Dispersible in aqueous solutions, it can be easily processed into macroscopic functional materials such as papers, aerogels and thin films for different kinds of applications. Equally, it can be used as versatile platform for the formation of functional hybrid optoelectronic materials. GO-ing on with GO research, we will present our latest findings on the use of GO as unique interface layer. We will demonstrate that GO can be employed in a controllable way to enable or block charge transfer in optoelectronic device structures. Emphasis is given on the unique and highly dynamic charge-transfer interface interactions established with conjugated polymers facilitating improved thin film operation of interest for optoelectronic device structures., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC hydrogels, stemming from Komagateibacter xylinus bacteria, has been optimized in terms of bacterial culture and subsequently tailored in their physical properties after drying, giving rise to aerogels and xerogels. These are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. It is possible to control the BC hydrogel properties by rationally selecting the appropriate drying method. In this regard, the aerogels (obtained by lyophilisation) have a much larger sorption capacity and a higher porosity, whereas xerogels (obtained by drying in open air) are more compact, as observed by SEM. Contrary to the aerogels, the BC xerogels are non-flammable. The pH of the culture medium does not have a great influence on the thermal stability of the xerogels and aerogels, but it is important for the hydrogel production rate and slightly influences the CI. The carbon source has a greater influence in the thermal stability of the final materials. Fructose provides a higher thermal stability; however, its dry materials are flammable; glucose and saccharose show an inverse trend as compared to fructose. The advantage of glucose over the fructose and saccharose is its somewhat faster production rate. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a nonpolar solvent, taking advantage of the dry BC sorption capacity. The accomplishment of a sorption test demonstrates that BC aerogels, once optimized in production and physical properties, can be applied as an efficient sorbent, taking advantage of their porosity and hydrophilic character. There are other possible implementations, such as filters to purify water, with critical implications in human safety and defence against chemical threats., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with unidirectional porosity as structured support for electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., 3-D graphene structures have been thoroughly studied in order to translate the properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactor and solar cells [1]. One way to prepare 3D aerogels is gelation of GO dispersions under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of rGO nanosheets and ultimate phase separation. Herein, we have achieved a control over the orientation and size of the pores in graphene aerogels as a way of prepare aerogels of unidirectional pores (Figure 1) [3] by modifying the hydrothermal synthesis conditions (pH, time, and freezing method). Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] Previously, the group has tested the aerogels for water remediation [2] and as supercapacitors [5]. In this work, the materials have been used as platinum nanoparticles support and tested for hydrogen evolution reaction (HER)., MINECO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE)), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Key towards enhanced performance of ZnO-GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
2 figures.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Graphene oxide (GO) is known to facilitate the enhancement of the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. However, the influence of its particular surface chemistry has not been clarified. In this work we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We demonstrate that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

P3HT aggregation tuned by synergic interaction with different carbon nanostructures

  • Colom, E.
  • Istif, Emin
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Poly(3-hexylthiophene) (P3HT) is one of the most popular conductive polymers for optoelectronic applications. [1] Their device operation critically depends on the nanocrystalline domain structure, i.e. the aggregate structure acquired by the polymer chains. Most common aggregates' distribution corresponds to H-aggregates, which implies charge transfer across the chains compared to those acquiring a J- aggregate structure with favorable charge transport along the chains. [2] We recently have shown that strong interactions between P3HT and water-dispersible graphene oxide can be obtained upon the formation of P3HT nanoparticles in aqueous dispersions. [3,4] These interactions enable a significant modification of the internal structure of P3HT aggregates towards a structure predominated by J-aggregates. Following this approach, in this work we have synthesized P3HT nanoparticles by the re-precipitation method in the presence of various types of water-soluble carbon nanostructures. Under scrutiny are graphene oxide flakes of different sizes, as well as nanocrystalline cellulose of type I and II. Of all the nanostructures exploited, the rarely investigated nanocyrstalline cellulose of type II, [5] exhibits significantly enhanced synergetic interface interactions with P3HT nanoparticles. This finding not only reveals a great potential towards improved thin film optoelectronic device structures, but even more underlines value of nanocellulose II for the development of green inks of photoactive polymers, ready to be used for printed electronics., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R1 (AEI/FEDER, UE), contract BES2017-080020 including FSE, UE, contract IJCI-2016-27789) and Government of Aragon (DGA-T03-17R and FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Carbon nanostructures and polysaccharides for biomedical materials

  • González Domínguez, José Miguel
  • Álvarez Sánchez, Miguel Ángel
  • Hadad, Caroline
  • Benito, Ana M.
  • Maser, Wolfgang K.
19 figures, 2 tables., Even though many members from the broad family of carbon nanostructures have been known to us for decades, and despite their promising potential in biology and medicine, there is still a long way ahead to reach the goal of using them in real applications. The cause of such a gap still lies in the persistent drawbacks of insolubility, processability difficulties, poor consistency of macroscopic assemblies and surface inertness of carbon nanostructures. However, solely their direct chemical derivatization might not solve the problem right away. New processing elements need to come into play, but this also twists the whole picture, as the toxicity and performance profiles become more complex. We herein analyse the potential of natural polysaccharides (with a particular focus on cellulose) towards hybrid materials and structures for biomedical purposes. The role that these biopolymers acquire when interfacing with carbon nanostructures goes far beyond a mere dispersing effect, but instead creates unprecedented synergies leading to hydrogels, aerogels, films or fibres with high biocompatibility and bioactivity. In this chapter, the history of carbon nanostructures and natural polysaccharides in the field of biomedical applications will be respectively reviewed, to subsequently go into detail of specific hybrids made with the most relevant biopolymers (namely cellulose, chitin, chitosan and alginate) with extraordinary prospects in biomedicine., Financial support was obtained from MINEICO under project ENE2016-79282-C5-1-R (AEI/UE/FEDER), the Gobierno de Aragón (Grupo Reconocido T03_20R), and a ‘Juan de la Cierva – Incorporación’ research grant (IJCI-2016- 27789)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene aerogels via hydrothermal gelation of graphene oxide colloids: Fine-tuning of its porous and chemical properties and catalytic applications

  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
14 figures.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Recently, 3D graphene aerogel has garnered a high interest aiming at benefiting of the excellent properties of graphene in devices for energy storage or environmental remediation. Hydrothermal gelation of GO dispersion is a straightforward method that offers many opportunities for tuning its properties and for processing it to devices. By adjusting hydrothermal gelation and drying conditions, it is possible to tune the density (from ~3 mg cm−3 to ~2 g cm−3), pore volume, pores size (micro to macropores), pore distribution, surface chemical polarity (hydrophobic or hydrophilic), and electrical conductivity (from ~0.5 S m−1 to S cm−1). Besides other well explored applications in energy storage or environmental remediation, graphene aerogels have excellent prospects as support for catalysis since they combine the advantages of graphene sheets (high surface area, high electrical conductivity, surface chemistry tunability, high adsorption capacity…) while circumventing their drawbacks such as difficult separation from reaction media or tendency to stacking. Compared to other 3D porous carbon materials used as catalyst support, graphene aerogels have unique porous structure. The pore walls are the thinnest to be expected for a carbon material (the thickness of monolayer graphene is 0.335 nm), hence leading to the highest exposed surface area per weight and even per volume for compacted aerogels. This has the potential to maximize the catalytic site density per reactor mass and volume while minimizing the pressure drop for continuous reactions in flow. Herein, different strategies to control the porous texture, chemical and physical properties are revised along with their processability and scalability for the implementation into different morphologies and devices. Finally, the application of graphene aerogels in the catalysis field are overviewed, giving a perspective about future directions needing further research., Financial support from Spanish Ministry MICINN under Project ENE2016-79282-C5-1-R (AEI/UE/FEDER), Gobierno de Aragon (Grupo reconocido T03_20R, DGA/FEDER/UE), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table.-- Supplementary information available., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanotube films as current collectors in TiO2 photoanodes

  • Ansón-Casaos, Alejandro
  • Lafragüeta, Ignacio
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the International Solar Fuels Conference 2021 (ISF2021), 26-29 July 2021, Online, organized by the The Royal Society of Chemistry. P. 128., Commercial methods for the production of green hydrogen are based on alkaline or proton exchange membrane (PEM) electrolysis. Several alternatives are being investigated, including photo-electrochemical water splitting. At a laboratory scale, working electrodes are tipically assembled on ITO of FTO transparent conducting films. Those substrates could be substituted by cheaper more abundant materials. Therefore, we fabricated opaque films of carbon nanotubes (CNTs) to be probed as supports for a photo-active semiconductive oxide, namely nanoparticulate TiO2. Aqueous dispersions of single-walled and multi-walled CNTs were prepared by sonication or stirring in a surfactant (SDBS). The inks were utilized to fabricate conducting electrodes by ultrasounds-assisted spraycoating on glass substrates. Nanoparticulate TiO2 (Aeroxide P25) was deposited on the CNT films by spray-coating of isopropanol suspensions. The TiO2/CNT electrodes were tested in a transient photocurrent experiment in 0.1M Na2SO4 at 0.4V vs. Ag/AgCl. A large capacitance contribution was detected because of CNTs. However, it was clearly demonstrated that an anodic photocurrent is generated under irradiation with a solar simulator (~300 mW·cm-2). While the obtained photocurrents were small ( a few µA·cm-2), the way is open to optimize new architectures for PEC hydrogen generation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Catalizadores bimetálicos basados en Ru y Ni para la reacción de reducción de CO2 a CH4

  • Bustinza, Ainhoa
  • Salcedo, Eloy
  • Liu, Yuefeng
  • García-Bordejé, José Enrique
2 figuras.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis, SECAT 2021,"Nuevos Retos de la Catálisis en Química, Medio ambiente y Energía", celebrada en Valencia, del 18 al 20 Octubre 2021., Debido al calentamiento global, el “Green Deal” de la Comisión Europea ha propuesto la reducción de las emisiones de CO2 al menos un 40% respecto los niveles de 1990 y aumentar la cuota de energía renovable al menos un 32%. El principal problema de la energía renovable es que es intermitente y no está alineada con la demanda. Por tanto, hay una necesidad urgente de encontrar medios de almacenar dicha energía. La tecnología de electrolisis del H2O para transformar la electricidad renovable en H2 es una tecnología madura. Sin embargo, el H2 es difícil de almacenar y transportar. El H2 puede convertirse en CH4 haciéndolo reaccionar con CO2 capturado mediante la reacción de Sabatier. De esta manera, se contribuye a cumplir dos objetivos del “Green Deal” europeo: el aumento de la cuota de energías renovables y la reducción de emisiones de CO2. Puesto que es una reacción altamente exotérmica, la concentración de equilibrio de CH4 aumenta la disminuir la temperatura, por lo que es necesario encontrar catalizadores activos a bajas temperaturas. En este trabajo se han preparado dos tipos de catalizadores bimetalicos. Por un lado, se han preparado por impregnación sucesiva catalizadores bimetálicos soportados en alúmina conteniendo: (i) Ni-Ru y (ii) un metal de metanación (Ni o Ru) y metal alcalino (Na, K). Estos catalizadores bimetálicos se han probado en la reacción de metanación de CO2 con H2. El objetivo es mejorar el comportamiento catalítico respecto a los catalizadores monometálicos. En el caso de los catalizadores bimetálicos Ni-Ru la aproximación es mejorar el catalizador reduciendo la cantidad de Ru al mínimo, mientras que en los bimetálicos con metal alcalino la estrategia consiste en aumentar la basicidad del catalizador, y por tanto, favorecer la adsorción de CO2. Se ha estudiado como influyen distintos parámetros de la síntesis por impregnación sucesiva en el comportamiento catalítico y su relación con la estructura y basicidad de los catalizadores caracterizada mediante diversas técnicas instrumentales (XPS, TEM, TPD y TPSR)., Se agradece la ayuda al Ministerio de Ciencia e Innovación por los proyectos ENE2016-79282-C5-1-R (AEI/UE/FEDER) y PID2020-119160RB-C21
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fotocatalizadores de TiO2 superficialmente enriquecidos en boro para la oxidación del propeno en fase gas

  • Cano Casanova, Laura
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes ya que, además de su excelente capacidad oxidativa, es estable, inocuo, biocompatible y asequible económicamente. Sin embargo, es deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco, así como ampliar su intervalo de absorción hacia el espectro visible. Una de las potenciales opciones de mejora se centra en la modificación del TiO2 con boro, lo que podría dar lugar a cambios en la energía y ocupación de los estados electrónicos en mitad de la banda prohibida del semiconductor. De acuerdo con esto, en el presente trabajo se han preparado y caracterizado catalizadores B-TiO2 con distintas cantidades de boro, se han tratado a distinta temperatura de cristalización y se ha analizado su actividad en la reacción de fotooxidación de propeno., La preparación de los fotocatalizadores implica las siguientes etapas: i) la mezcla de 5 ml de TTIP y 50 ml de isopropanol se agrega gota a gota, con agitación constante, a 50 ml de una mezcla de agua / isopropanol (1:1) que contiene una cierta cantidad de ácido bórico (5,10,50,100 y 230 mg). ii) El gel resultante se envejece durante 12 h, después se recoge por filtrado y se seca en un horno a 90 ºC. iii) El TiO2 obtenido se trata térmicamente en un reactor de cuarzo horizontal en atmósfera de aire a 550 °C, aunque en algunos casos también se ha realizado el tratamiento a 450 y 350 ºC. Los fotocatalizadores, que se han nombrado como B-X-TiO2-T, donde X es la cantidad (en mg) de ácido bórico añadido durante la síntesis y T la temperatura de cristalización (en °C), se han caracterizado mediante adsorción física de gases, difracción de rayos X (DRX) y espectroscopía fotoelectrónica de rayos (XPS). Además, algunos de los materiales se han caracterizado por espectroscopía de fotoluminiscencia (PL) y en celda fotoelectroquímica (PEC). La oxidación fotocatalítica de propeno en fase gas se llevó a cabo a temperatura ambiente empleando 0.11 g de fotocatalizador y una corriente de 100 ppmv de propeno en aire, con flujo de 30 ó 60 ml/min, utilizando una lámpara UV (TL8W/05 FAM, Philips) de λ=365 nm. El análisis del gas de salida del reactor se ha realizado mediante espectrometría de masas (OmniStar GSD 301 O1). Los fotocatalizadores B-X-TiO2-550 presentan propiedades texturales similares y pequeñas diferencias en el grado de cristalinidad y proporción de fases cristalinas (anatasa y rutilo). Se ha observado que la presencia de ácido bórico durante la síntesis de TiO2 parece dificultar la formación de rutilo. Además, para las muestras B-100-TiO2-550 y B-230-TiO2-550 se observa un pico adicional (a 2θ= 28. 1º) que corresponde al óxido bórico (B2O3). El análisis por XPS de las muestras B-X-TiO2-550 revela diferencias importantes con respecto al material B-0-TiO2-550, y se ha observado que en las muestras B-100-TiO2-550 y B-230-TiO2-550 el boro está fundamentalmente presente como B2O3 (de acuerdo con los datos de DRX)., En el resto de las muestras se deduce que hay especies BxOy con relación y/x inferior a 1.5. El análisis mediante XPS permite también deducir que, en las muestras con menos cantidad de boro, una mayor proporción del mismo interacciona con la titania. La muestra B-5-TiO2-550 presenta la mayor actividad catalítica. La caracterización de esta muestra mediante medidas de PL y PEC permite explicar dicho resultado, ya que se ha encontrado una disminución drástica de todas las bandas de PL, lo que indica una reducción en la tasa de recombinación de los pares electrón-hueco fotoexcitados. Además, el voltagrama cíclico revela que la irradiación da lugar a una activación pronunciada de ciertos estados superficiales cercanos a la banda de conducción. La temperatura de cristalización también afecta la actividad catalítica. Así, la muestra B-5-TiO2-450 es un 10% más activa que la B-5-TiO2-550. Esta mejora puede deberse a que con el tratamiento a 450 °C no se genera rutilo y a que el enriquecimiento superficial en boro es mayor. Además, los análisis de PL indican que este fotocatalizador presenta una menor recombinación de los pares electrón-hueco y las medidas de fotocorriente muestran un desplazamiento de la longitud de onda de absorción hacia mayores valores, lo que implica que la energía de la banda prohibida (Eg) es menor. La combinación de estas propiedades puede explicar el buen comportamiento obtenido para la muestra tratada a 450 ºC., Los autores agradecen la financiación económica a los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles de grafeno con porosidad ajustable como soporte estructurado de catalizadores y electrocatalizadores

  • Sánchez-García, Joel
  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura y 1 tabla.-- Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis (SECAT 2019), celebrada en Córdoba, del 24 al 16 de junio de 2019., Es de gran importancia, tanto fundamental como práctica, trasladar las propiedades de láminas bidimensionales de grafeno a estructuras macroscópicas 3D con un control de la estructura porosa y de la funcionalidad. Sin embargo, el grafeno, tanto el preparado por CVD como el preparado por reducción de GO, tiene tendencia a apilarse para formar grafito y disminuir su superficie expuesta. Esto es uno de los principales inconvenientes que ha impedido la explotación de todo su potencial. Los aerogeles de grafeno tienen propiedades interesantes como alta área superficial específica, macroporosidad abierta para favorecer el transporte de moléculas voluminosas y iones, flexibilidad, resistencia mecánica y conductividad térmica y eléctrica que les confiere un gran potencial para distintos campos de aplicación incluido su uso como reactores catalíticos y electrocatalizadores [1]. Una manera eficiente de preparar aerogeles de grafeno es partiendo de dispersiones de óxido de grafeno (GO) y su gelación bajo condiciones hidrotermales [2]. En el proceso hidrotermal, algunos grupos funcionales oxigenados de las láminas de GO se eliminan por reducción formando oxido de grafeno reducido (RGO). Simultáneamente, ocurre una disminución de la hidrofilicidad y pérdida de cargas superficiales, lo que conduce al entrecruzamiento de las láminas de RGO y una separación de fases para formar un hidrogel. Después de secado criogénico se forma el aerogel que es el que se ha utilizado como soporte de catalizadores en este trabajo. En un trabajo anterior, se ha soportado nanodiamantes y se han probado en la deshidrogenación oxidativa de propano [3]. En este trabajo, se han soportado metales nobles y metales de transición y se han probado en la oxidación selectiva de alcohol bencílico a benzaldehído y como electrocatalizadores para la descomposición de agua., Agradecemos el soporte financiero del MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), y “EU Regional Development Funds” asociados., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Purificación de dispersiones acuosas de nanotubos de carbono de capa única mediante centrifugación

  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
Trabajo presentado a la XIV Reunión del Grupo Español del Carbón, celebrada en Málaga del 22 al 25 de Octubre de 2017., La presentación de este trabajo ha sido posible gracias a la financiación recibida de la Comisión Europea (H2020-MSCA-ITN-20 14-ETN 642742 "Enabling Excel lence"), el MINECO y el FEDR (ENE 2016-79282-CS-1-R) y el Gobierno de Aragón y el FSE (DGA-ESF-T66 "Grupo Consolidado")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photopotential and photocurrent improvement of TiO2 in alkaline media by an electrocvhemically reduced graphene oxide layer

  • Hernández-Ferrer, Javier
  • Sanahuja-Parejo, Olga
  • Víctor-Román, Sandra
  • Martínez Fernández de Landa, María Teresa
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al HeteroNanoCarbo: "Advances and Applications in Carbon Related Nanomaterials: From Pure to Doped Structures Including Heteroatom Layers", celebrada en Benasque (España) del 11 al 15 de diciembre de 2017., Financial support from Spanish Ministerio de Economía, Competitividad y Industria (MINECO, project ENE2016-79282-C5-1R and associated EU Regional Development Funds, and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds) is acknowledged. S.V.R. acknowledges MINECO for her PhD contract (BES-2014-068727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fotocatalizadores de TiO2 modificados con B. Aplicación en la oxidación fotocatalítica de propeno

  • Cano Casanova, Laura
  • Amorós-Pérez, A.
  • Ansón-Casaos, Alejandro
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
1 figura.-- Resumen del trabajo presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes, principalmente debido a su excelente capacidad oxidativa, estabilidad química, bajo precio, inocuidad y biocompatibilidad. Sin embargo, aún sería deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco y la ampliación del intervalo de absorción hacia el espectro visible. Una de las opciones potenciales de mejora se centra en la modificación del TiO2 con boro, que en algunos casos podría dar lugar a una disminución de la energía del límite inferior de la banda de conducción del TiO2. En el presente trabajo se estudia dicha modificación empleando ácido bórico para introducir B en la composición del TiO2 preparado mediante el método sol-gel y se investiga el efecto de la cantidad de boro introducido y la temperatura de cristalización. Estos fotocatalizadores se han probado en la oxidación fotocatalítica de propeno en fase gas., Los autores agradecen la financiación económica de los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reducción de CO2 a CH4 usando materiales nanocarbonosos o monolitos recubiertos de alumina como soportes

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., Las energías renovables es una de las soluciones energéticas del futuro, debido a los riesgos medioambientales del uso de los combustibles fósiles y que sus reservas son limitadas. Sin embargo, la producción de energía a partir de fuentes renovables es intermitente, no coincidiendo normalmente la demanda y oferta ni en el tiempo, ni en el espacio. Por tanto, urge el desarrollo de soluciones para el almacenamiento y transporte de la energía renovable. Una solución es la conversión de la energía renovable en H2 mediante electrolisis. El principal problema es su almacenamiento y transporte puesto que el tiempo típico de descarga en las infraestructuras actuales es menos de 100 horas. Cuando se requiere almacenamiento por largo tiempo, una opción es la conversión de H2 con CO2 en gas natural sintético (CH4), que puede almacenarse en las actuales infraestructuras sin limitación. Además, el uso de CO2 como materia prima contribuye a cerrar el ciclo del carbono con el beneficio medioambiental que ello conlleva. La reacción de CO2 con H2 se descubrió hace más de un siglo y se conoce como reacción de Sabatier [1]. Diferentes metales de transición y nobles soportados en óxidos metálicos se han usado como soporte de catalizador en esta reacción. El uso de materiales carbonosos en esta reacción es muy escaso, incluso se ha descrito que los nanotubos de carbono (CNT) son inactivos para esta reacción, lo que se atribuye a la incapacidad de quimisorber CO2 por parte del soporte [2]. Para la aplicación industrial de esta tecnología es fundamental el diseño del reactor catalítico. La hidrogenación de CO2 para producir CH4 es altamente exotérmica (ΔHRo=-165 kJ/mol). Por tanto, es esencial una adecuada evacuación del calor generado para evitar puntos calientes que disminuyen el rendimiento a CH4 y la vida del catalizador. Para solucionarlo, se han usado diferentes tipos de reactores como lechos fluidizados, reactores multitubulares enfriados externamente o reactores en etapas con enfriamiento intermedio [3]. Más recientemente, se ha propuesto el recubrimiento de intercambiadores de calor con la fase catalíticamente activa. De manera que se integra la reacción y el enfriamiento. En este contexto, el recubrimiento catalítico de monolitos se ha propuesto como un modelo para el recubrimiento de intercambiadores de calor para la metanación de CO2 [4]. Además, los monolitos tienen baja perdida de carga lo que permitiría convertir el CO2 de gases de postcombustión, que se emiten a presión atmosférica, sin necesidad de represurizarlos. En este trabajo, hemos soportado nanopartículas de Ru en nanotubos de carbono (CNTs), nanofibras de carbono (CNFs) y nanofibras dopadas con nitrógeno (N-CNF). Los catalizadores con un 5% Ru soportados en CNF, N-CNF y CNT se han comparado a un catalizador comercial de 5% de Ru en alúmina (Ru/Al2O3). Para estudiar la relación entre la estructura y el comportamiento, los catalizadores se han caracterizado exhaustivamente por TEM y técnicas transitorias como desorción a temperatura programada (TPD) y reacción superficial a temperatura programada (TPSR). En una segunda parte, monolitos de cordierita se han recubierto con alúmina. Posteriormente, se ha utilizado como fase activa Ni, Ru y catalizadores bimetálicos de ambos optimizando la preparación del catalizador para la reacción de metanación de CO2., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with tailored porosity as structured support for catalysis and electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactors and solar cells [1]. One way to prepare 3D aerogels is starting from GO dispersions and its gelation under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimately to phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing drying methodology) to achieve a control over the orientation and size of the pores in graphene aerogels, preparing aerogels of unidirectional pores (Figure 1) [3]. Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] As a proof of concept, the materials have been tested as support for nanodiamonds metalfree catalyst for selective propane dehydrogenation[4] and as noble metal catalyst support for benzyl alcohol oxidation and electrocatalyst for water splitting (HER, OER) and ORR., MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Enhancing the performance of ZnO to GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., We demonstrate that the surface chemistry of graphene oxide Graphene oxide (GO) is of critical importance for the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. To this end we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We show that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH¿O=C hydrogen bonds and the removal of chemisorbed water

  • Núñez, J.D.
  • Benito, A.M.
  • Rouzière, S.
  • Launois, P.
  • Arenal, R.
  • Ajayan, P.M.
  • Maser, W.K.
Owing to their great significance for energy storage and sensing applications, multi-layer papers consisting of graphene oxide-carbon nanotube (GO-CNT) hybrid sheets were prepared by in situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. the water molecules inherently bound to the oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH¿OC hydrogen bonds between the carboxylic groups of the oCNTs and OFGs of GO. At oCNT amounts of about 10 to 15 wt% this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. The thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of the cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tribological and mechanical properties of graphene nanoplatelet/PEEK composites

  • Puértolas, J.A.
  • Castro, M.
  • Morris, J.A.
  • Ríos, R.
  • Ansón-Casaos, A.
Poly(ether ether ketone) (PEEK) is a relevant thermoplastic in industry and in the biomedical sector. In this work, the lubricant capability of graphene nanoplatelets (GNPs) is used for improving the PEEK wear properties. Nanocomposites were prepared by solvent-free melt-blending and injection molding at various compositions between 1 and 10 wt. % of GNPs. The Raman G band shows a progressive increment proportional to the bulk GNP percentage. From calorimetric data, the polymer matrix structure is interpreted in terms of a 3-phase model, in which the crystalline phase fluctuates from 39 to 34% upon GNP addition. Thermal conductivity varies in accordance with the polymer crystallinity. Tensile and flexural tests show a progressive increase in the modulus, as well as a decrease in the fracture strength and the work of fracture. Most important, the composite surface undergoes a substantial improvement in hardness (60%), together with a decrease in the coefficient of friction (-38%) and a great reduction in the wear factor (-83%). Abrasion and fatigue wear mechanisms are predominant at the lowest and highest GNP concentrations respectively. In conclusion, GNPs are used without any chemical functionalization as the filler in PEEK-based materials, improving the surface hardness and the tribological properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sulfonated hydrothermal carbons from cellulose and glucose as catalysts for glycerol ketalization

  • Fernández, Pablo
  • Fraile, José María
  • García-Bordejé, Enrique
  • Pires, Elísabet
Soetal is one of the most used glycerol-derived solvents. Its production via heterogeneous catalysis is crucial for avoiding important product losses typically found in the aqueous work-up in homogeneous catalysis. In this work, we present a study of the catalytic synthesis of solketal using sulfonated hydrothermal carbons (SHTC). They were prepared from glucose and cellulose resulting in different textural properties depending on the hydrothermal treatment conditions. The sulfonated hydrothermal carbons were also coated on a graphite microfiber felt (SHTC@GF). Thus, up to nine different solids were tested, and their activity was compared with commercial acidic resins. The solids presented very different catalytic activity, which did not correlate with their physical-chemical properties indicating that other aspects likely influence the transport of reactants and products to the catalytic surface. Additionally, the SHTC prepared from cellulose showed better reusability in batch reaction tests. This work also presents the first results for the production of solketal in a flow reactor, which opens the way to the use of SHTC.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photoactivity improvement of TiO2 electrodes by thin hole transport layers of reduced graphene oxide

  • Hernández-Ferrer, J.
  • Ansón-Casaos, A.
  • Víctor-Román, S.
  • Sanahuja-Parejo, O.
  • Martínez, M.T.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Nanostructured TiO2 and graphene-based materials constitute components of actual interest in devices related to solar energy conversion and storage. In this work, we show that a thin layer of electrochemically reduced graphene oxide (ECrGO), covering nanostructured TiO2 photoelectrodes, can significantly improve the photoactivity. In order to understand the working principle, ECrGO/TiO2 photoelectrodes with different ECrGO thicknesses were prepared and studied by a set of photoelectrochemical measurements. Methanol in alkaline conditions was employed as effective hole acceptor probe to elucidate the electronic phenomena in the electrode layers and interfaces. These studies underline the hole accepting properties of ECrGO and reveal the formation of a p-n junction at the interface between ECrGO and TiO2. It is shown for the first time that the resulting space charge region of about 10 nm defines the operational functionality of the ECrGO layer. Films thinner than the space charge region act as hole transport layer (HTL), which efficiently transfers holes to the liquid interface thus leading to enhanced photoactivity. Thicker films however act as hole blocking layer (HBL), resulting in a systematic decrease of the photoactivity. The finding of a thickness dependent threshold value for the operation of ECrGO as HTL and HBL is of general interest for the fabrication of optoelectronic devices with improved performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Percolating Metallic Structures Templated on Laser-Deposited Carbon Nanofoams Derived from Graphene Oxide: Applications in Humidity Sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Victor-Roman, Sandra
  • Pelaez-Fernandez, Mario
  • Nicolosi, Valeria
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interfacing Transition Metal Dichalcogenides with Carbon Nanodots for Managing Photoinduced Energy and Charge-Transfer Processes

  • Vallan, L.
  • Canton-Vitoria, R.
  • Gobeze, H.B.
  • Jang, Y.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • D''Souza, F.
  • Tagmatarchis, N.
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1, 2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal, and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation, charge transfer from an exciton dissociation path of MoS2 to CNDs, within CND-MoS2, was observed. However, such a process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes. development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unique properties and behavior of nonmercerized type-ii cellulose nanocrystals as carbon nanotube biocompatible dispersants

  • Gonzalez-Dominguez, José Miguel
  • Anson-Casaos, Alejandro
  • Grasa, Laura
  • Abenia, Luis
  • Salvador, Alba
  • Colom, Eduardo
  • Mesonero, José E.
  • Garcia-Bordeje, J.Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanocellulose is increasingly being investigated as a paradigm of a sustainable nanomaterial because of its extraordinary physical and chemical properties, together with its renewable nature and worldwide abundance. The rich structural diversity of cellulose materials is represented by different crystalline allomorphs, from which types I and II stand out. While type I is naturally and ubiquitously present, type II is man-made and requires harsh and caustic synthesis conditions such as the so-called mercerization process. Here, we provide an optimal scenario to obtain either type-I or II nanocrystalline cellulose (NCC) by a mercerization-free method consisting only of the acid hydrolysis commonly used to produce nanocellulose from microcellulose. The possibility of having nonmercerized type-II NCC acquires a great relevance since this nanostructure shows particularly appealing properties. Moreover, an entangled and wrapped system arises when used as a dispersing agent for single-walled carbon nanotubes (SWCNTs), significantly different from that of type I. The biological testing of each NCC type and their respective SWCNT-NCC dispersions in human intestinal (Caco-2) cells reveals a general innocuous behavior in both cancer and normal stages of differentiation; however, the type-II-based SWCNT-NCC dispersions display cytotoxicity for cancer cells while enhancing mitochondrial metabolism of normal cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanotube film electrodes with acrylic additives: Blocking electrochemical charge transfer reactions

  • Ansón Casados, A.
  • Sanahuja Parejo, O.
  • Hernández Ferrer, J.
  • Benito, Ana M.
  • Wolfgang K., Maser
Carbon nanotubes (CNTs) processed into conductive films by liquid phase deposition technologies reveal increasing interest as electrode components in electrochemical device platforms for sensing and energy storage applications. In this work we show that the addition of acrylic latex to water-based CNT inks not only favors the fabrication of stable and robust flexible electrodes on plastic substrates but, moreover, sensitively enables the control of their electrical and electrochemical transport properties. Importantly, within a given concentration range, the acrylic additive in the films, being used as working electrodes, effectively blocks undesired faradaic transfer reactions across the electrode–electrolyte interface while maintaining their capacitance response as probed in a three-electrode electrochemical device configuration. Our results suggest a valuable strategy to enhance the chemical stability of CNT film electrodes and to suppress non-specific parasitic electrochemical reactions of relevance to electroanalytical and energy storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The viscosity of dilute carbon nanotube (1D) and graphene oxide (2D) nanofluids

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Sanahuja-Parejo, O.
  • Víctor-Román, Sandra
  • González-Domínguez, J.M.
  • García-Bordejé, E.
  • Benito, Ana M.
  • Maser, W.K.
Controlling the physicochemical properties of nanoparticles in fluids directly impacts on their liquid phase processing and applications in nanofluidics, thermal engineering, biomedicine and printed electronics. In this work, the temperature dependent viscosity of various aqueous nanofluids containing carbon nanotubes (CNTs) or graphene oxide (GO), i.e. 1D and 2D nanoparticles with extreme aspect ratios, is analyzed by empirical and predictive physical models. The focus is to understand how the nanoparticle shape, concentration, motion degrees and surface chemistry affect the viscosity of diluted dispersions. To this end, experimental results from capillary viscosimeters are first examined in terms of the energy of viscous flow and the maximum packing fraction applying the Maron–Pierce model. Next, a comparison of the experimental data with predictive physical models is carried out in terms of nanoparticle characteristics that affect the viscosity of the fluid, mostly their aspect ratio. The analysis of intrinsic viscosity data leads to a general understanding of motion modes for carbon nanoparticles, including those with extreme aspect ratios, in a flowing liquid. The resulting universal curve might be extended to the prediction of the viscosity for any kind of 1D and 2D nanoparticles in dilute suspensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modification of Physicochemical Properties and Boosting Electrical Conductivity of Reduced Graphene Oxide Aerogels by Postsynthesis Treatment

  • Carrera, C
  • Gonzalez-Dominguez, JM
  • Pascual, FJ
  • Anson-Casaos, A
  • Benito, AM
  • Maser, WK
  • Garcia-Bordeje, E
Electrically conductive graphene aerogels are attracting great interest as functional materials. Nevertheless, graphene aerogels synthesized from graphene oxide usually exhibit low electrical conductivity. In order to increase conductivity, herein a postsynthesis thermal treatment at several temperatures (from 300 to 1000 degrees C) has been applied to pristine reduced graphene oxide aerogels under two different atmospheres, namely, inert Ar flow and isopropanol+H-2 flow. Upon thermal treatment under Ar flow, the electrical conductivity of aerogel upscales with the treatment temperature. More remarkably, the electrical conductivity becomes 1 order of magnitude larger when the thermal treatment is carried out under isopropanol+H-2 instead of under Ar, while maintaining a very low density and porous structure. The electrical conductivity achieved is exceptionally high for such a lightweight and porous material. The exhaustive characterization allowed disclosing that the generation of carbon links between the reduced graphene oxide nanosheets is the reason for this enhancement. The electrically conductive aerogels have excellent prospects for application as scaffolds for energy storage or biomedical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics

  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Hernández Ferrer, Javier|||0000-0002-6586-6935
  • Grasa, Laura
  • González-Domínguez, José Miguel|||0000-0002-0701-7695
  • Martínez Fernández de Landa, María Teresa
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Urriolabeitia, Esteban P.
  • Ansón-Casaos, Alejandro|||0000-0002-3134-8566
  • Benito, Ana M.|||0000-0002-8654-7386
  • Maser, Wolfgang K.|||0000-0003-4253-0758
Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method. Nanoparticles that were prepared by acid or sonochemical treatments from graphite keep a crystalline core and can be classified as graphene quantum dots. The electrochemically produced nanoparticles do not clearly show the graphene core, but it is made of heterogeneous aromatic structures with limited size. The polycondensation nanoparticles do not have C[dbnd]C double bonds. The type of functional groups on the carbon backbone and the optical properties, both absorbance and photoluminescence, strongly depend on the nanoparticle origin. The selected types of nanoparticles are compatible with human intestinal cells, while three of them also show activity against colon cancer cells. The widely different properties of the nanoparticle types need to be considered for their use as diagnosis markers and therapeutic vehicles, specifically in the digestive system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Functionalized carbon dots on TiO₂ for perovskite photovoltaics and stable photoanodes for water splitting

  • Ansón-Casaos, Alejandro|||0000-0002-3134-8566
  • Hernández Ferrer, Javier|||0000-0002-6586-6935
  • Vallan, Lorenzo|||0000-0001-5267-4849
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Benito, Ana M.|||0000-0002-8654-7386
  • Maser, Wolfgang K.|||0000-0003-4253-0758
Various types of fluorescent carbon nanoparticles, often called carbon dots (CDs), are synthesized by different polycondensation methods: microwave irradiation, hydrothermal conditions or solution chemistry at ambient temperature with subsequent chemical functionalization. The CDs are deposited on TiO films to be probed as electron transport layers in perovskite photovoltaics and the anode for photoelectrochemical water splitting. Nitrogen CDs, which do not contain oxygen, lead to an increase of around 50 mV in the open circuit voltage of perovskite solar cells. All the CD types produce an improved photocurrent in water splitting, particularly CDs that are functionalized with thiol groups and butyl chains. It is demonstrated that the modified electrode is stable under continuous operation. Other electrochemical characteristics of the electrode, such as the voltammogram shape, onset potentials and open circuit potentials, remain nearly unchanged upon the deposition of CDs. Only the incident photon to current conversion efficiency improves clearly, extending the absorption range by around 20 nm towards longer wavelengths. This study provides new data about mechanisms and electrode arrangements for improving the performance of n-type semiconductors in photovoltaic cells and photoelectrochemical hydrogen production.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón