Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pyranylidene/thienothiophene-based organic sensitizers for dye-sensitized solar cells

  • Marco, A.B.
  • Martínez de Baroja, N.
  • Andrés-Castán, J.M.
  • Franco, S.
  • Andreu, R.
  • Villacampa, B.
  • Orduna, J.
  • Garín, J.
Novel push-pull systems featuring a 4H-pyranylidene donor fragment and thienothiophene as (part of) p-conjugated spacer have been synthesized in order to test their photovoltaic properties. An analogous derivative with two thiophene rings is also included in the study for comparison purposes. The optical and electrochemical properties of the novel D-p-A molecules have been discussed and DSSCs devices based on these dyes have been characterized. The photovoltaic performance is sensitive to the structural modification of the dye: the tert-butyl substituents on the pyranylidene moiety and the hexyl chains of the thienothiophene spacer were shown to improve the efficiency. A maximum power conversion efficiency of 6.41% has been achieved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design-to-Device Approach Affords Panchromatic Co-Sensitized Solar Cells

  • Cooper, C.B.
  • Beard, E.J.
  • Vázquez-Mayagoitia, Á.
  • Stan, L.
  • Stenning, G.B.G.
  • Nye, D.W.
  • Vigil, J.A.
  • Tomar, T.
  • Jia, J.
  • Bodedla, G.B.
  • Chen, S.
  • Gallego, L.
  • Franco, S.
  • Carella, A.
  • Thomas, K.R.J.
  • Xue, S.
  • Zhu, X.
  • Cole, J.M.
Data-driven materials discovery has become increasingly important in identifying materials that exhibit specific, desirable properties from a vast chemical search space. Synergic prediction and experimental validation are needed to accelerate scientific advances related to critical societal applications. A design-to-device study that uses high-throughput screens with algorithmic encodings of structure–property relationships is reported to identify new materials with panchromatic optical absorption, whose photovoltaic device applications are then experimentally verified. The data-mining methods source 9431 dye candidates, which are auto-generated from the literature using a custom text-mining tool. These candidates are sifted via a data-mining workflow that is tailored to identify optimal combinations of organic dyes that have complementary optical absorption properties such that they can harvest all available sunlight when acting as co-sensitizers for dye-sensitized solar cells (DSSCs). Six promising dye combinations are shortlisted for device testing, whereupon one dye combination yields co-sensitized DSSCs with power conversion efficiencies comparable to those of the high-performance, organometallic dye, N719. These results demonstrate how data-driven molecular engineering can accelerate materials discovery for panchromatic photovoltaic or other applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modification of the electronic properties of the p-spacer of chromophores linked to calix[4]arene platform for DSSCs applications

  • Colom, E.
  • Andrés-Castán, J.M.
  • Barrios, D.
  • Duerto, I.
  • Franco, S.
  • Garín, J.
  • Orduna, J.
  • Villacampa, B.
  • Blesa, M.J.
We have developed two novel dyes based on p-tert-butyl-calix[4]arene in order to evaluate their behavior as sensitizer in photovoltaic devices. These dyes consist in a difunctionalized calix[4]arene with triphenylamine (TPA)-donor, a heteroaromatic π-conjugated spacer, thiophene and benzothiadiazole-phenyl ring, respectively and cyanoacetic acid as acceptor group. The effect of the π-spacer has been studied by UV–vis spectroscopy and Differential Pulse Voltammetry and the models compounds have been theoretically investigated. The dye bearing phenylbenzothiadiazole results in a bathochromic shifted absorption and an adequate efficiency to transfer charge from D to A. The considerable increase of the photocurrent density results in a better efficiency of the devices prepared with these novel dyes with respect to the p-tert-butyl-calix[4]arene derivatives bearing TPA dye. In particular, p-tert-butyl-calix[4]arene derivative based on phenylbenzothiadiazole has reached an efficiency value of 5.84% which means an increase of 33% of the efficiency over those calix[4]arene derivatives with TPA dye.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

De novo Design of Organic Photocatalysts: Bithiophene Derivatives for the Visible-light Induced C-H Functionalization of Heteroarenes

  • Bottecchia, C.
  • Martín, R.
  • Abdiaj, I.
  • Crovini, E.
  • Alcazar, J.
  • Orduna, J.
  • Blesa, M.J.
  • Carrillo, J.R.
  • Prieto, P.
  • Noël, T.
Herein, we report the de novo synthesis and characterization of a series of substituted bithiophene derivatives as novel and inexpensive organic photocatalysts. DFT calculations were used to predict a priori their absorption spectra and redox potentials, which were then confirmed with empirical data. The photocatalytic activity of this novel class of organic photoredox catalyst was demonstrated in two visible-light mediated strategies for the C-H functionalization of heteroarenes. The implementation of these strategies in a continuous-flow photo-microreactor afforded moderate to excellent yields within few minutes of reaction time. Due to their straightforward synthesis, low cost and good photocatalytic properties we believe that the proposed bithiophene derivatives could be employed as a new class of organic photoredox catalysts. (Figure presented.).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Push-pull thiophene chromophores for electro-optic applications: from 1D linear to beta-branched structures

  • Rothe, C
  • Neusser, D
  • Hoppe, N
  • Dirnberger, K
  • Vogel, W
  • Gamez-Valenzuela, S
  • Navarrete, JTL
  • Villacampa, Belén
  • Berroth, M
  • Delgado, MCR
  • Ludwigs, S
We report the synthesis and characterization of a novel series of push-pull chromophores bearing 1D linear and beta-branched thiophenes as pi-conjugated spacers between a 2, 2, 4, 7-tetramethyl-1, 2, 3, 4-tetrahydroquinoline electron donor unit and dicyano- and tricyanovinylene electron acceptor groups. The effect of the introduction of beta-thiophenes on the linear and nonlinear (NLO) optical properties as well as electrochemical and thermal data is studied in detail by performing a comparative study between the branched and 1D linear systems. In addition, a parallel DFT computational study is used to evaluate structure-property relationships. The non-linear optical behavior of the molecules both in solution and in solid state as electro-optic (EO) films using a guest-host approach shows very promising performance for electro-optic applications with high molecular first hyperpolarizabilities (mu beta) of 4840 x 10(-48) esu and electro-optic coefficients r(33) reaching 650 pm V-1. One highlight is that the electro-optic films of the beta-branched chromophores are superior in terms of thermal stability in device operation as measured by a transmissive modified reflective Teng-Man method. This work provides guidelines for the design of improved electro-optic materials including beta-branched chromophores which could be useful for practical EO applications, where both enhanced beta and r(33) values together with chemical and thermal stability are necessary.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of supporting electrolyte concentration on one-step electrodeposited CuInS2 films for ZnS/CuInS2 solar cell applications

  • Rodríguez, C.A.
  • Delgadillo, A.
  • Núñez, J.
  • Cabello-Guzmán, G.
  • Mera, A.C.
  • Delplancke, M.P.
  • Villacampa, B.
  • Carrasco, C.
A one-step electrodeposition process was used to obtain CuInS2 (CIS) films on a molybdenum substrate by varying the supporting electrolyte (lithium chloride, LiCl) concentration. The as-deposited samples were characterized by scanning electron microscopy, energy-dispersive spectroscopy, profilometry, and diffuse reflectance spectroscopy. From characterization, it was found that different concentrations of LiCl mainly lead to a morphological change in the obtained CIS films. Moreover, their chemical composition shifted to the stoichiometric composition for high concentrations of the supporting electrolyte. After annealing, the structural analysis from X-ray diffraction revealed that all samples crystallized in the tetragonal phase of CIS. In addition, it was found that the crystallite size increased for samples grown at higher concentrations of LiCl. Optical studies carried out by diffuse reflectance spectroscopy revealed that the band gap values increased from ~ 1.40 to ~ 1.45 eV (average) after the annealing process. Finally, zinc sulfide (ZnS) thin films were chemically deposited onto electrodeposited CIS films in order to evaluate the photovoltaic response of ZnS/CIS bilayer systems. We discovered that ZnS thin films covered the surface of CIS more effectively for the highest concentration of LiCl and that only the ZnS/CIS bilayer with the CIS film obtained at the highest concentration of LiCl showed a photovoltaic response.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Twisted One-Dimensional Charge Transfer and Related Y-Shaped Chromophores with a 4 H-Pyranylidene Donor: Synthesis and Optical Properties

  • Tejeda-Orusco, V.
  • Andreu, R.
  • Orduna, J.
  • Villacampa, B.
  • Franco, S.
  • Civera, A.
Three series of push-pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the p-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C= C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV-visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower µß values (except for thiobarbiturate derivatives).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

4H-pyranylidene-based small push-pull chromophores: Synthesis, structure, electronic properties and photovoltaic evaluation

  • Tejeda-Orusco, V.
  • Blais, M.
  • Cabanetos, C.
  • Blanchard, P.
  • Andreu, R.
  • Franco, S.
  • Orduna, J.
  • Diosdado, B.E.
The synthesis and electrochemical and optical characterizations of four new 4H-pyranylidene-based push-pull molecules are reported herein as well as their evaluation as donor materials for organic photovoltaics. Studied systems exhibit good absorption properties and appropriate LUMO levels for a photoinduced electron transfer to C60. Bilayer organic solar cells fabricated from these new donors and C60 as the acceptor gave photocurrent however with low power conversion efficiencies. As shown by X-ray diffraction and theoretical calculations, titled molecules present a twisted structure which may prevent the formation of suitable p-p contacts between adjacent molecules hence explaining their low photovoltaic performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Wheat-straw-derived activated biochar as a renewable support of Ni-CeO2 catalysts for CO2 methanation

  • Di Stasi C.
  • Renda S.
  • Greco G.
  • González B.
  • Palma V.
  • Manyà J.J.
Ceria-and urea-doped activated biochars were used as support for Ni-based catalysts for CO2 methanation purposes. Different materials were prepared and tested to find the best catalytic formulation. After several CO2 methanation experiments—carried out at 0.35–1.0 MPa and 300–500¿C—it was found that the most suitable catalyst was a wheat-straw-derived activated biochar loaded with 30 wt.% of CeO2 and 20 wt.% of Ni. Using this catalyst, a CO2 conversion of 65% with a CH4 selectivity of 95% was reached at 1.0 MPa, 400¿C, and 13, 200 h-1 . From the study of the influence of the gas hourly space velocity, it was deduced that the most likely reaction mechanism was a reverse water–gas shift reaction, followed by CO hydrogenation. N-doping of the carbon support as an alternative to the use of ceria was also investigated. However, both CO2 conversion and selectivity toward CH4 values were clearly lower than those obtained for the ceria-containing catalyst cited above. The outcomes of this work indicate that a renewable biomass-derived support can be effectively employed in the catalytic conversion of CO2 to methane. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A novel s-linkage to dianchor dyes for efficient dyes sensitized solar cells: 3-methyl-1, 1-cyclohexane

  • Duerto, Isolda
  • García-Palacín, Marta
  • Barrios, Daniel
  • Garín, Javier
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María J.
We have synthesized two sensitizers based on the 3-methyl-1, 1-cyclohexane, a novel s-linkage to prepare dianchored dyes. These novel dyes are difunctionalized systems with aniline-donor (D), a p-conjugated spacer (p) based on thiophene or bithiophene and cyanoacetic acid as acceptor and anchoring group (A). The UV–vis absorption and the Differential Pulse Voltammetry have been used to study the effect of both s-linkage and p-spacer. The relevant increase of the molar extinction coefficient of these dianchored dyes has been investigated by theoretical calculations. The dye bearing bithiophene results in a both broader and higher absorption as well as an adequate efficiency to transfer charge from D to A with respect to bithiophene dyes. The photovoltaic properties of these sensitizers without co-adsorbent have been studied. The novel difunctionalized derivatives present a relevant increase of the photocurrent density which results in a better performance with respect to the single dyes. The difunctionalized derivative based on bithiophene has given rise to an efficiency value of 7.8% and is stable up to 1000 h after the device assembly.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Difunctionalized dyes for DSSCs based on two different scaffolds: p-tert-butylcalix[4]arene or isophthalic acid

  • Duerto, I.
  • Barrios, D.
  • Garín, J.
  • Orduna, J.
  • Villacampa, B.
  • Blesa, M.J.
Novel DSSCs (Dye Sensitized Solar Cells) have been developed with difunctionalized dyes, which are based on isophthalic acid or 4-tert-butylcalix[4]arene as scaffold and N, N-dialkylaniline as electrondonor connected to thiophene as p-spacer. This heteroaromatic ring has been used because of its thermal stability and adequate charge transfer. The use of 4-tert-butylcalix[4]arene has given rise a considerable increase of the molar extinction coefficient in this difunctionalized dye relative to the individual one, which makes them susceptible to be used in low luminosity condition. All dyes have been completely characterized. The photoelectrochemical properties of the devices prepared with or without co-adsorbate (chenodeoxycholic acid) have been determined. When co-adsorbate is added, solar cells prepared with isophthalic acid and 4-tert-butylcalix[4]arene have power conversion efficiencies of 6.0 and 6.3%, respectively; such devices also display good long-term stability up to 1000 h.