Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC aerogels and xerogels are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a non-polar solvent, taking advantage of the dry BC sorption capacity., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC hydrogels, stemming from Komagateibacter xylinus bacteria, has been optimized in terms of bacterial culture and subsequently tailored in their physical properties after drying, giving rise to aerogels and xerogels. These are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. It is possible to control the BC hydrogel properties by rationally selecting the appropriate drying method. In this regard, the aerogels (obtained by lyophilisation) have a much larger sorption capacity and a higher porosity, whereas xerogels (obtained by drying in open air) are more compact, as observed by SEM. Contrary to the aerogels, the BC xerogels are non-flammable. The pH of the culture medium does not have a great influence on the thermal stability of the xerogels and aerogels, but it is important for the hydrogel production rate and slightly influences the CI. The carbon source has a greater influence in the thermal stability of the final materials. Fructose provides a higher thermal stability; however, its dry materials are flammable; glucose and saccharose show an inverse trend as compared to fructose. The advantage of glucose over the fructose and saccharose is its somewhat faster production rate. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a nonpolar solvent, taking advantage of the dry BC sorption capacity. The accomplishment of a sorption test demonstrates that BC aerogels, once optimized in production and physical properties, can be applied as an efficient sorbent, taking advantage of their porosity and hydrophilic character. There are other possible implementations, such as filters to purify water, with critical implications in human safety and defence against chemical threats., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

P3HT aggregation tuned by synergic interaction with different carbon nanostructures

  • Colom, E.
  • Istif, Emin
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Poly(3-hexylthiophene) (P3HT) is one of the most popular conductive polymers for optoelectronic applications. [1] Their device operation critically depends on the nanocrystalline domain structure, i.e. the aggregate structure acquired by the polymer chains. Most common aggregates' distribution corresponds to H-aggregates, which implies charge transfer across the chains compared to those acquiring a J- aggregate structure with favorable charge transport along the chains. [2] We recently have shown that strong interactions between P3HT and water-dispersible graphene oxide can be obtained upon the formation of P3HT nanoparticles in aqueous dispersions. [3,4] These interactions enable a significant modification of the internal structure of P3HT aggregates towards a structure predominated by J-aggregates. Following this approach, in this work we have synthesized P3HT nanoparticles by the re-precipitation method in the presence of various types of water-soluble carbon nanostructures. Under scrutiny are graphene oxide flakes of different sizes, as well as nanocrystalline cellulose of type I and II. Of all the nanostructures exploited, the rarely investigated nanocyrstalline cellulose of type II, [5] exhibits significantly enhanced synergetic interface interactions with P3HT nanoparticles. This finding not only reveals a great potential towards improved thin film optoelectronic device structures, but even more underlines value of nanocellulose II for the development of green inks of photoactive polymers, ready to be used for printed electronics., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R1 (AEI/FEDER, UE), contract BES2017-080020 including FSE, UE, contract IJCI-2016-27789) and Government of Aragon (DGA-T03-17R and FEDER, UE).