Skip to main content

NANO-GRAPEROS_DESDE EL LABORATORIO HASTA LA FABRICA. ANALISIS DE CICLO DE VIDA

ENE2016-79282-C5-5-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Passive heating and cooling of photovoltaic greenhouses including thermochromic materials

  • Padilla, Javier
  • Toledo, Carlos
  • López-Vicente, Rodolfo
  • Montoya, Raquel
  • Navarro, José-Ramón
  • Abad, José
  • Urbina Yeregui, Antonio
The integration of photovoltaic technologies into greenhouse envelopes appears to be an innovative and environmentally-friendly way to supply their various energy demands. However, the effect on the inner growing conditions, especially on the temperature, must be assessed in order to effectively implement this solution. In this study, experimental temperature data were obtained over two years for four structures built with different photovoltaic technologies (mono-crystalline silicon, amorphous silicon, cadmium telluride, and an organic polymeric technology) and fitted to a thermal model in order to provide a comprehensive analysis of their potential utilization as a cover material in greenhouses. Additionally, the thermal effect of color in structures composed of several common construction materials (brick, wood, plasterboard and glass) was quantified and modelled, supplementing the thermal analysis of passive solutions for this application. In all cases, inner and ambient temperature differences of up to +20 °C, created by a passive heating effect during the day, and – 5 °C, created by a passive cooling effect during the night, have been observed, suggesting the use of the photovoltaic modules with different degrees of structure coverage, complemented with the color tuning of the modules themselves as passive methods to control the temperature and light spectrum of greenhouses., This work was supported by Project ENE2016-79282-C5-5-R, funded by MINECO-Spain; by Project PID2019-104272RB-C55, funded by Agencia Estatal de Investigación (AEI-MICINN, Spain); and by Project 19882-GERM-15, funded by F. Séneca (Región de Murcia, Spain), all including European Commission FEDER funds. C.T. is grateful to F. Séneca (Región de Murcia, Spain) for postdoctoral grant Ref: 21227/PD/19
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Environmental impact of the production of graphene oxide and reduced graphene oxide

  • Serrano‑Luján, Lucía
  • Víctor-Román, Sandra
  • Toledo, Carlos
  • Sanahuja-Parejo, Olga
  • Mansour, Ahmed E.
  • Abad, José M.
  • Amassian, Aram
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Urbina, Antonio
1 Tabla, 5 Figuras.-- Material suplementario disponible en línea en la página web del editor., Reduced graphene oxide (rGO) is widely seen as the most promising route for the low-cost mass production of graphene for many applications ranging from ultrathin electrodes to structural nanocomposites. The Hummers and Marcano methods are the two most successful approaches for producing high-performance rGO, but have been criticized for producing toxic emissions. We have applied life cycle assessment methodology to evaluate the environmental impacts of both production routes for GO and rGO in the context of applications requiring bulk materials or thin coatings. We find no current obstacle to the industrial scale production of graphene arising from its environmental impact. The cumulative energy demand is found to have a cap value between 20.7 and 68.5 GJ/Kg, a relatively high value; impact in other categories (such as human toxicity or resource depletion) is lower, and materials inventory does not include critical/strategic materials other than graphite itself. Our study proposes 1 kg of graphene as functional unit, and an application-specific functional unit normalized by conductivity which show that Hummers production method is far more suitable for bulk applications of graphene, with lower embedded energy per kg of graphene production, while Marcano’s production method is better suited for thin film electronic applications., This work was supported by Projects ENE2016-79282-C5-1-R and ENE2016-79282-C5-5-R funded by MINECO-Spain (including EU FEDER funds), Project 19882-GERM-15 funded by F. Séneca (Región de Murcia, Spain), and DGA Grupo Reconocido T03_17R by Gobierno de Aragón (including EU FEDER funds). L. S.-L. and C. T. are also grateful to F. Séneca for postdoctoral grant Ref. 19759/PD/15, and predoctoral grant Ref.19768/FPI/15 respectively. SVR thanks Spanish MINECO for her PhD grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A synchrotron x-ray diffraction and hard x-ray photoelectron spectroscopy study of Zn negative electrodes at different charge and discharge states of Zn/MnO2 batteries using an ionic liquid-based gel polymer electrolyte

  • Abad, José M.
  • Santos, Florencio
  • Tafur, Juan P.
  • Urbina, Antonio
  • Román García, Elisa Leonor
  • González-Martínez, J.F.
  • Rubio-Zuazo, J.
  • Castro, Germán R.
  • Fernández Romero, Antonio J.
Zn/MnO batteries including an ionic liquid-based gel polymer electrolyte (IL-GPE) have been discharged or discharged and then recharged reaching different states of charge. The Zn electrodes used in these Zn/MnO batteries are studied by HAXPES and synchrotron XRD techniques. Besides, HAXPES measurements are compared with the results obtained by a conventional XPS. Formation of Zn(OH) and ZnO is found in intermediate states of charge during charging and discharging. However, only ZnO is observed in the anode when a full discharging was carried out. Conversely, an entire charging process produces a complete reduction of all Zn species to metallic Zn. In addition, various techniques have confirmed the entrance of Triflate anions and NMP solvent molecules in the electrode, accompanying the Zn cations movement during the charging., The authors thank the financial support from the Spanish Ministerio de Economía y Competitividad (Ref. ENE2013-48816-C5-3-R and ENE2016-79282-C5-5-R) including FEDER funds and provision of synchrotron radiation facilities at ESRF BM25B line. A.U. thanks F. Séneca (Región de Murcia, Ref: 19882-GERM-15).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Neutron reflectometry and hard X-ray photoelectron spectroscopy study of the vertical segregation of PCBM in organic solar cells

  • Urbina, A.
  • Abad, Jose
  • Fernández Romero, A.J.
  • Lacasa, J.S.
  • Colchero, J.
  • González-Martínez, J.F.
  • Rubio-Zuazo, J.
  • Castro, Germán R.
  • Gutfreund, P.
[EN] The composition of the active layer of a benchmark functional glass/ITO/[P3HT:PCBM][1.1:1]/Al organic solar cell has been studied by neutron reflectometry (NR) and hard X-ray photoelectron spectroscopy (HAXPES). Thermal annealing was performed in several steps and NR and HAXPES were recorded for every temperature. By fitting the NR results to a model composed of several layers, the scattering length density (SLD) distribution through the sample was obtained, and from this SLD profile, the evolution of the composition of the active layer as a function of temperature was established. For the outer layers, HAXPES results confirm the composition evolution. The results show that PCBM tends to segregate reducing the initial concentration of PCBM in the central part of the active layer and increasing its concentration towards both interfaces. The effect of the Al electrode as studied by HAXPES on the nearest zone of the active layer (up to 50 nm) is to stabilize the P3HT depletion in this area, an effect which is not affected by thermal annealing., Helpful comment sare acknowledged to Andrew Nelson,developer of the“Motofit”softwarepackage.This work was supported by Project ENE2016-79282-C5-5-R funded by MINECO-Spain (including FEDERfunds) and Project 19882-GERM-15 funded by Fundación Séneca(Región de Murcia, Spain). We acknowledge Institute Laue Langevin(ILL) for beamtime allocation at D17, and Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC) and European Synchrotron Radiation Facility(ESRF) for be a mtime allocation at line BM-25.