Skip to main content

DISEÑANDO LAS PROPIEDADES ELECTRONICAS DEL GRAFENO

FIS2015-67367-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Luminescence Dynamics of Silica-Encapsulated Quantum Dots During Optical Trapping

  • Rodríguez-Rodríguez, H.
  • Acebrón, M.
  • Juárez, B.H.
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
[EN] The trade-off between photobrightening and photobleaching controls the emission stability of colloidal quantum dots. This balance is critical in optical trapping configurations, where irradiances that confine and simultaneously excite the nanocrystals in the focal region cannot be indefinitely lowered. In this work, we studied the photobrightening and bleaching behaviors of two types of silica-encapsulated quantum dots excited upon two-photon absorption in an optical trap. The first type consists of alloyed CdSeZnS quantum dots covered with a silica shell. We found that the dynamics of these as-prepared architectures are similar to those previously reported for bare surface-deposited quantum dots, where thousands of times smaller irradiances were used. We then analyzed the same quantum dot systems treated with an extra intermediate sulfur passivating shell for the better understanding of the surface traps influence in the temporal evolution of their emission in the optical trap. We found that these latter systems exhibit better homogeneity in their photodynamic behavior compared to the untreated ones. These features strengthen the value of quantum dot preparations in optical manipulation as well as for applications where both long and maximal emission stability in physiological and other polar media are required., The authors thank A. Blanco and D. Granados for fruitful discussion and S. de Lorenzo for technical help. H.R-R. is supported by an FPI-UAM fellowship and M. A. by a contract from Fundacion IMDEA Nanociencia. The research leading to these results has received funding from the Spanish Ministry of Economy and Competitiveness (grant numbers MAT2015-71806-R and FIS2015-67367-C2-1-P), from Comunidad de Madrid (S2013/MIT-2740) and from UAM-Banco Santander (CEAL-AL/2015-15).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shell or dots - precursor controlled morphology of Au-Se deposits on CdSe nanoparticles

  • Cueva, Leonor de la
  • Meyns, Michaela
  • Bastús, Neus G.
  • Rodríguez-Fernández, Jonathan
  • Otero, Roberto
  • Gallego, José M.
  • Alonso, Concepción
  • Klinke, Christian
  • Juárez, Beatriz H.
The most prevalent image of the morphology of Au-CdSe hybrid nanoparticles (HNPs) is that of dumbbells or matchsticks with CdSe nanoparticles (NPs) acting as seed material onto which spherical Au dots are deposited. On the basis of a system with only three reaction components, CdSe seeds, n-dodecyltrimethylammonium bromide-complexed AuCl, and dodecanethiol, we demonstrate how the morphology of the Au deposits on the semiconductor NPs, either in the form of dots on the vertices or in the form of a shell around the NP surface, can be determined by controlling the oxidation state of the metal precursor. Furthermore, we apply X-ray photoelectron spectroscopy to show that the resultant deposits are composed of partially oxidized Au, corresponding to a Au-Se compound regardless the deposit morphology. To obtain a detailed characterization of the HNPs with different morphologies and to gain mechanistic insights into the deposition process, (cryogenic) high-resolution transmission electron microscopy, mass spectrometry, cyclic voltammetry, and computational simulations have been performed. Our results emphasize that the knowledge of the surface chemistry of the seed particles as well as a defined picture of the metal precursors is necessary to understand heterodeposition processes., C.K. and M.M. acknowledge the European Union for the ERC Starting Grant 2D-SYNETRA (304980, Seventh Framework Program FP7) and the Deutsche Forschungsgemeinschaft for granting the project KL 1453/9-1. B.H.J. is thankful for funding in the frame of the following projects: S2013/MIT2740 from Comunidad de Madrid and FIS2012-33011 and MAT2013-47395-C4-3-R and FIS2015-67367-C2-1-P from the Spanish Ministry of Economy and Competitiveness. R.O. is thankful for FIS2012-33011. Furthermore, the authors thank the Helmholtz Zentrum Berlin to have benn granted access to the BESSY-II facility, in particular the SurICat UHV XPS station. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2

  • Niu, Yue
  • González Abad, Sergio
  • Frisenda, Riccardo
  • Marauhn, Philipp
  • Drüppel, Matthias
  • Gant, Patricia
  • Schmidt, Robert
  • Taghavi, Najme S.
  • Barcons, David
  • Molina-Mendoza, Aday J.
  • Vasconcellos, Steffen Michaelis de
  • Bratschitsch, Rudolf
  • Pérez de Lara, David
  • Rohlfing, Michael
  • Castellanos-Gómez, Andrés
This article belongs to the Special Issue Low Dimensional Materials for Environmental and Biomedical Applications., The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2., This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research, innovation programme (grant agreement No. 755655, ERC-StG 2017 project 2D-TOPSENSE), the EU Graphene Flagship funding (Grant Graphene Core 2, 785219), the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515, the MINECO (program FIS2015-67367-C2-1-P), and the China Scholarship Council (File NO. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polarization‐Sensitive and Broadband Photodetection Based on a Mixed‐Dimensionality TiS3/Si p–n Junction

  • Niu, Yue
  • Frisenda, Riccardo
  • Flores, Fernando
  • Ares, José R.
  • Jiao, Weicheng
  • Pérez de Lara, David
  • Sánchez López, Carlos
  • Wang, Rongguo
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The capability to detect the polarization state of light is crucial in many day‐life applications and scientific disciplines. Novel anisotropic 2D materials such as TiS3 combine polarization sensitivity, given by the in‐plane optical anisotropy, with excellent electrical properties. Here, the fabrication of a monolithic polarization‐sensitive broadband photodetector based on a mixed‐dimensionality TiS3/Si p–n junction is demonstrated. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350%, and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization‐sensitive systems such as polarimeters., The authors acknowledge funding from the EU Graphene Flagship (Grant Graphene Core2 785219) and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC‐StG 2017 project 2D‐TOPSENSE). R.F. acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680‐50‐1515. D.P.d.L. acknowledges support from the MINECO (program FIS2015‐67367‐C2‐1‐P). Y.N. acknowledges the grant from the China Scholarship Council (File No. 201506120102). W.C.J. acknowledges the Program for the Top Young and Middle‐aged Innovative Talents of Harbin Institute of Technology. MIRE group acknowledges financial support from MINECO‐FEDER (MAT2015‐65203‐R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evidence of large spin-orbit coupling effects in quasi-free-standing graphene on Pb/Ir(111)

  • Otrokov, Mikhail M.
  • Klimovskikh, Ilya I.
  • Calleja, Fabián
  • Shikin, Alexander M.
  • Vilkov, Oleg Yu.
  • Rybkin, Artem G.
  • Estyunin, D.
  • Muff, Stefan
  • Dil, J. Hugo
  • Vázquez de Parga, Amadeo L.
  • Miranda, Rodolfo
  • Ochoa, Héctor
  • Guinea, Francisco
  • Cerdá, Jorge I.
  • Chulkov, Eugene V.
  • Arnau, Andrés
A combined scanning tunneling microscopy, angle- and spin-resolved photoemission spectroscopy and density functional theory study of graphene on Ir(1 1 1) intercalated with a well-ordered, full Pb monolayer is presented. Lead intercalation between graphene and Ir(111) reduces the coupling to the metallic substrate in such a way that its corrugation becomes negligible and distortions of the linear dispersion largely disappear, while graphene's sublattice symmetry is maintained and it turns out to be n-doped. Remarkably, the spin–orbit splittings induced by the proximity of the Ir(1 1 1) surface are preserved after Pb intercalation in a wide energy range. We further show that the Pb/Ir(1 1 1) surface induces a complex spin texture with both in-plane and out-of-plane components. Our calculations reveal the origin of the out-of-plane spin components in graphene to trace back to the out-of-plane spin-polarized surface and resonance states of Ir(1 1 1), while the Pb interlayer on its own does not induce any vertical spin polarization in the carbon sheet. However, the Brillouin zone folding imposed by the rectangular symmetry of the intercalated Pb layer plays an instrumental role in the spin–orbit coupling (SOC) transfer to graphene, as well as in the linearization of its bands. Finally, since no sizeable gap is observed at the Dirac point, we suggest that an intrinsic (Kane and Mele type) SOC does not exceed the extrinsic (Rashba) SOC for graphene on Pb/Ir(111)., We acknowledge the support by the Basque Departamento de Educacion, UPV/EHU (Grant No. IT-756-13), Spanish Ministerio de Economia y Competitividad (MINECO Grants No. FIS2016- 75862-P, MAT2015-66888-C3-1R and FIS2015-67367-C2-1-P), Comunidad de Madrid (MAD2DCM and Nanofrontmag) and Tomsk State University competitiveness improvement programme (project No. 8.1.01.2017). The support by the Saint Petersburg State University (Grant No. 15.61.202.2015) and Russian Foundation for Basic Research (Grant No. 18-32-00145) are also acknowledged. The part of photoemission measurements had been supported by Russian Science Foundation Grant No. 18-12-00062. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gate tunable photovoltaic effect in MoS2 vertical p–n homostructures

  • Svatek, Simon A.
  • Antolín, Elisa
  • Lin, Der-Yuh
  • Frisenda, Riccardo
  • Reuter, Christoph
  • Molina-Mendoza, Aday J.
  • Muñoz Sánchez, Manuel
  • Ko, Tsung-Shine
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
p–n junctions based on vertically stacked single or few-layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, stable and substitutional doping of MoS2 into n- and p-type materials has been demonstrated. MoS2 is an interesting material for use in optoelectronic applications due to its potential of low-cost production in large quantities, strong light–matter interactions and chemical stability. Here we report the characterization of the optoelectronic properties of vertical homojunctions made by stacking few-layer flakes of MoS2:Fe (n-type) and MoS2:Nb (p-type). The junctions exhibit a peak external quantum efficiency of 4.7% and a maximum open circuit voltage of 0.51 V; they are stable in air; and their rectification characteristics and photovoltaic response are in excellent agreement with the Shockley diode model. The gate-tunability of the maximum output power, the ideality factor and the shunt resistance indicate that the dark current is dominated by trap-assisted recombination and that the photocurrent collection depends strongly on the spatial extent of the space charge region. We demonstrate a response time faster than 80 ms and highlight the potential to integrate such devices into quasi-transparent and flexible optoelectronics., S. A. S. and N. A. acknowledge funding from the European Commission through the FP7 ITN MOLESCO (Project Number 606728). E. A. gratefully acknowledges financial support from L’Oréal-UNESCO through the Women in Science program. A. J. M.-M. acknowledges the financial support from MICINN (Spain) through the scholarship BES-2012-057346. D. Y. and T. S. acknowledge the support from the Ministry of Science and Technology of the Republic of China under the MOST 104-2112-M-018-004 and 104-2221-E-018-017. D. P. is thankful for funding from the Spanish Ministry of Economy and Competitiveness through FIS2015-67367-C2-1-P. R. F. thanks the Netherlands Organisation for Scientific Research (NWO) for the financial support through the research programme Rubicon with the project number 680-50-1515. AC-G. acknowledges the support from the BBVA Foundation through the fellowship “I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales” (“Semiconductores ultradelgados: hacia la optoelectronica flexible”), from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406), from the MICINN (MAT2014-58399-JIN) and from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)), and the European Commission under the Graphene Flagship, contract CNECTICT-604391., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Collective concerted motion in a molecular adlayer visualized through the surface diffusion of isolated vacancies

  • Urban, Christian
  • Otero, Roberto
  • Écija, David
  • Trelka, Marta
  • Martín, Nazario
  • Gallego, José M.
  • Miranda, Rodolfo
We have measured STM movies to study the diffusion of individual vacancies in a self-assembled layer of a tetrathiafulvalene derivative (exTTF) on Au(111) at room temperature. The diffusion is anisotropic, being faster along the compact direction of the molecular lattice. A detailed analysis of the anisotropic displacement distribution of the single vacancies shows that the relative abundance of double jumps (that is, the collective motion of molecular dimers) with respect to single jumps is rather large, the number of double jumps being more than 20% of the diffusion events. We conjecture that the relative abundances of long jumps might be related to the strength of the intermolecular bonding and the misfit of the molecular overlayer with the substrate lattice., Financial support from the Ministerio de Economía y Competitividad (Grant Nos. FIS2013-40667-P and FIS2015-67367-C2-1-P) and Comunidad de Madrid (NANOFRONTMAG Reference No. S2013/MT-2850) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal ligand desorption in CdSe quantum dots by correlated XPS and STM

  • Iacono, Fabiola
  • Cueva, Leonor de la
  • Gallego, José M.
  • Juárez, Beatriz H.
  • Otero, Roberto
Pyramidal CdSe NCs self-assembled on highly oriented pyrolytic graphite (HOPG) substrates were characterized, both by STM and synchrotron XPS measurements, upon annealing treatments at different temperatures. By STM, shape modifications at different temperatures was observed. In particular the NCs experience a shape relaxation via an intra-particle ripening or physical coagulation after exposing the sample at 200°C, while a mass transfer via inter-particle ripening (Ostwald ripening) is activated at 400°C. Synchrotron XPS data allow establishing a clear differentiation between the desorption behavior of long octadecylphosphonic acid-related ligands and short chloride ionic ligands., B.H.J. thanks for funding under the frame of the following projects: S2013/MIT‐2740 from Comunidad de Madrid, FIS2012‐33011, FIS2015‐67367‐C2‐1‐P, and MAT2013‐47395‐C4‐3‐R, from the Spanish Ministry of Economy and Competitiveness. R.O. thanks for FIS2012‐33011 and FIS2015‐67367‐C2‐1‐P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

  • Niu, Yue
  • Frisenda, Riccardo
  • Svatek, Simon A.
  • Orfila, Gloria
  • Gallego-Marcos, Fernando
  • Gant, Patricia
  • Agra, Nicolás
  • León, Carlos
  • Rivera-Calzada, Alberto
  • Pérez de Lara, David
  • Santamaría, Jacobo
  • Castellanos-Gómez, Andrés
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS onto a lanthanum strontium manganite (LaSrMnO) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 10, and a photovoltaic effect with V up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities., Work at IMDEA was supported by MINECO (Ramón y Cajal 2014 program RYC-2014-01406, MAT2014-58399-JIN, FIS2015-67367-C2-1-P), the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850) and the European Commission under the Graphene Flagship (contract CNECTICT-604391) and FP7 ITN MOLESCO (project no. 606728). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File NO. 201506120102). Work at UCM supported by Spanish MINECO through grants MAT2014-52405-C02-01 and by CAM through grant CAM S2013/MIT-2740. Work at ICMM is supported by Spanish MINECO through grant MAT2014-52405-C02-02.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite

  • Gant, Patricia
  • Ghasemi, Foad
  • Maeso, David
  • Munuera, C.
  • López-Elvira, Elena
  • Frisenda, Riccardo
  • Pérez de Lara, David
  • Rubio-Bollinger, Gabino
  • García-Hernández, Mar
  • Castellanos-Gómez, Andrés
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission-mode and epi-illumination-mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite over a broad range of the visible spectrum through a fit of the acquired spectra to a model based on the Fresnel law., We acknowledge funding from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1 – Graphene-based disruptive technologies), from the FP7 ITN MOLESCO (project no. 606728), from the MINECO (FIS2015-67367-C2-1-P, MAT2014-57915-R, MDM-2014-0377 and Ramón y Cajal 2014 program RYC-2014-16626), from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lithography-free electrical transport measurements on 2D materials by direct microprobing

  • Gant, Patricia
  • Niu, Yue
  • Svatek, Simon A.
  • Agraït, Nicolás
  • Munuera, C.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
We present a method to carry out electrical and optoelectronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts with the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS devices fabricated by the conventional lithographic process. We also show that this method can be used with other 2D materials., We acknowledge funding from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from the EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies), from the FP7 ITN MOLESCO (project no. 606728), from the MINECO (Ramón y Cajal 2014 program RYC-2014-01406, RYC-2014-16626, MAT2014-58399-JIN and FIS2015-67367-C2-1-P), from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and the NANOFRONTMAG-CM program (S2013/MIT-2850). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File no. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning intermolecular charge transfer in donor-acceptor two-dimensional crystals on metal surfaces

  • Rodríguez-Fernández, Jonathan
  • Robledo, Maitreyi
  • Lauwaet, Koen
  • Martín-Jiménez, Alberto
  • Cirera, Borja
  • Calleja, Fabián
  • Díaz-Tendero, Sergio
  • Alcamí, Manuel
  • Floreano, Luca
  • Domínguez-Rivera, Marcos
  • Vázquez de Parga, Amadeo L.
  • Écija, David
  • Gallego, José M.
  • Miranda, Rodolfo
  • Martín, Fernando
  • Otero, Roberto
Organic charge transfer (CT) compounds display a wide range of exotic electronic properties (charge-density wave stabilization, Peierls transitions, etc.) depending on the amount of charge transferred from the donor (D) to the acceptor (A) species. A complete exploration of the complex electronic phase diagrams for such compounds would thus require methods to systematically tune the amount of charge exchanged in the CT process. This has proven however challenging in the past: chemical functionalization of the constituent molecules can also affect the packing of the molecular units in the crystal, whereas changing D:A stoichiometry is often not possible in the bulk. Interestingly, it was recently found that multiple stoichiometries can actually be achieved by codeposition of different amounts of D and A molecules on metal surfaces. The question, however, of whether CT processes between D and A molecules can be tuned with the D:A ratio in such mixtures has not yet been studied, and it is no trivial matter, since competing CT processes between the metal surface and the organic adsorbates might hinder interadsorbate charge transfer. Here we demonstrate that the CT process from the organic donor tetrathiafulvalene (TTF) to the acceptor tetracyanoquino-p-dimethane (TCNQ) can be tuned with exquisite accuracy (∼0.1 e) by controlling the stoichiometry of D:A cocrystals deposited on Ag(111). This control opens new avenues to explore the complex phase diagrams of organic CT compounds and to tailor their electronic properties., The authors acknowledge financial support from the Spanish Ministry for Economy and Competitiveness (Grants FIS2012-33011, FIS2015-67367-C2-1-P, FIS2013-42002-R, FIS2016-77889-R, CTQ2013-43698-P, CTQ2016-76061-P), the regional government of Comunidad de Madrid (Grants S2009/MAT1726 and S2013/MIT-3007), Universidad Autónoma de Madrid (UAM/48) and IMDEA Nanoscience. L.F. acknowledges financial support from MIUR (PRIN-2010BNZ3F2, Project DESCARTES), S.D.-T. acknowledges the ‘“Ramón y Cajal”’ program of the MINECO (RYC-2010-07019), and the María de Maeztu Programme for Units of Excellence in R&D of the MINECO (MDM-2014-0377).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unexpected optical blue shift in large colloidal quantum dots by anionic migration and exchange

  • Acebrón, María
  • Galisteo-López, Juan F.
  • López, Cefe
  • Herrera, Facundo C.
  • Mizrahi, Martín
  • Requejo, Félix G.
  • Palomares, F. Javier
  • Juárez, Beatriz H.
Compositional changes taking place during the synthesis of alloyed CdSeZnS nanocrystals (NCs) allow shifting of the optical features to higher energy as the NCs grow. Under certain synthetic conditions, the effect of those changes on the surface/interface chemistry competes with and dominates over the conventional quantum confinement effect in growing NCs. These changes, identified by means of complementary advanced spectroscopic techniques such as XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy), are understood in the frame of an ion migration and exchange mechanism taking place during the synthesis. Control over the synthetic routes during NC growth represents an alternative tool to tune the optical properties of colloidal quantum dots, broadening the versatility of the wet chemical methods., This work has been partially supported through the following projects: S2013/MIT-2740 from Comunidad de Madrid and FIS2015-67367-C2-1-P and MAT2016-80394-R from the Spanish Ministry of Economy and Competitiveness. F.C.H., M.M., and F.G.R. acknowledge CONICET and ANPCYT (Project PICT 2015-2285). XAFS experiments were partially supported by Projects XAFS2-20170359 and SXS-20160690 (LNLS, Campinas, Brazil).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication

Re-Oxidation of ZnO Clusters Grown on HOPG

  • Morales, Carlos
  • Campo, Ángel Adolfo del
  • Méndez, Javier
  • Prieto, Pilar
  • Soriano, Leonardo
This article studies the chemical interaction between ZnO and highly oriented pyrolytic graphite for as grown and thermally treated samples. In-situ X-ray photoelectron spectroscopy and ex-situ Raman spectroscopy confirm that graphite is affected by these processes, becoming oxidized and defective only in the presence of ZnO clusters that become recrystallized upon thermal re-oxidation processes performed at 400 °C. By comparing these results with other identical experiments performed with ZnO clusters grown on graphene and even with CoO clusters grown on graphite, the present results show how the interaction of the ZnO clusters with graphitic substrates depend on two factors—firstly, the mode of growth and corresponding morphology, and secondly, the reactivity of the graphitic substrates, either graphene or graphite. The results presented here will help us understand the fundamental interactions in ZnO/graphitic heterostructures and to define their operating limits., This investigation was funded by the MINECO of Spain through the FIS2015-67367-C2-1-P project and by the Comunidad de Madrid through the NANOMAGCOST-CM P2018/NMT4321 project. One of the authors (C.M.) thanks MCIU for the FPU14/02020 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silver nanopillar coatings grown by glancing angle magnetron sputtering for reducing multipactor effect in spacecrafts

  • Troncoso, G.
  • García-Martín, José Miguel
  • González Sagardoy, María Ujué
  • Morales, Carlos
  • Fernández Castro, Marcial
  • Soler-Morala, Jimena
  • Galán, Luis
  • Soriano, Leonardo
We have studied nanometric high aspect ratio Ag nanopillar coatings exhibiting reduced secondary electron emission for the mitigation of multipactor effect in radio-frequency space devices of high frequency and high power. The Ag nanopillars have been grown by glancing angle deposition with DC magnetron sputtering. Some samples have been covered by a gold capping layer to reduce oxidation and aging effects. The secondary emission yield of the surfaces of these samples has been measured and compared to those of flat Ag and Au reference samples. The results show that high aspect ratio surface roughness at the nanometer scale significantly reduce the secondary emission yield of the surface. This reduction is more important for low electron energies, which is the most influencing energy range of electrons for multipactor. The multipactor region for the nanopillar coating presenting the best secondary emission yield properties has been simulated, finding practical suppression of multipactor effect. The high-frequency surface resistance of these samples has also been estimated from published computations for similar surface roughness patterns. It was found that such nanopillar coatings are compatible with the best accomplishments of present space industry., This investigation has been funded by the MINECO of Spain through the AYA2012-39832-C02-02, FIS2015-67367-C2-1-P, MAT2015-69035-REDC and MAT2014-59772-C2-1-P projects and by the Comunidad de Madrid through the NANOMAGCOST-CM Ref: P2018/NMT4321 project. One of the authors (C.M.) thanks MECD for FPU14/02020 grant. The authors also want to thank SEGAINVEX and SIdI from UAM for technical support, and to acknowledge the service from the MiNa Laboratory at IMN funded by Comunidad de Madrid (S2018/NMT-4291 TEC2SPACE), MINECO (CSIC13-4E-1794) and the European Union (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comparative study of the ZnO growth on graphene and graphene oxide: the role of the initial oxidation state of carbon

  • Gomez-Alvarez, Miguel Angel
  • Morales, Carlos
  • Méndez, Javier
  • Campo, Ángel Adolfo del
  • Urbanos, Fernando J.
  • Díaz, Aarón
  • Reséndiz, Luis
  • Flege, Jan Ingo
  • Granados, Daniel
  • Soriano, Leonardo
The role of the oxidation state of carbon on the early stages of growth of metal oxides was studied for the particular case of ZnO deposition on graphene and graphene oxide on SiO2 (G/SiO2 and GO/SiO2, respectively) substrates. The growth was carried out by thermal evaporation of metallic Zn under an oxygen atmosphere at room temperature. This technique permits quasi-equilibrium conditions during the oxide growth, allowing the characterization of the fundamental interaction between ZnO and the graphene-based substrates. Although in both cases ZnO follows a Volmer–Weber growth mode controlled by nucleation at defects, the details are different. In the case of the GO/SiO2 substrate, the nucleation process acts as a bottleneck, limiting the coverage of the complete surface and allowing the growth of very large ZnO structures in comparison to G/SiO2. Moreover, by studying the Zn-LMM Auger spectra, it is shown how the initial nature of the substrate influences the composition of the ZnO deposit during the very early stages of growth in terms of Zn/O atomic ratio. These results are compared to those previously reported regarding ZnO growth on graphite and graphene on Cu (G/Cu). This comparison allows us to understand the role of different characteristics of graphene-based substrates in terms of number of defects, oxidation state, graphene support substrate and number of graphene layers., This investigation has been funded by the MINECO of Spain through the FIS2015-67367-C2-1-P project and by the Comunidad de Madrid through the NANOMAGCOST-CM P2018/NMT4321 project. One of the authors (C.M.) thanks MCIU for a FPU grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Discrete Electronic Subbands due to Bragg Scattering at Molecular Edges

  • Martín-Jiménez, Alberto
  • Gallego, José M.
  • Miranda, Rodolfo
  • Otero, Roberto
[EN] The discretization of the electronic structure of nanometer-size solid systems due to quantum confinement and the concomitant modification of their physical properties is one of the cornerstones for the development of nanoscience and nanotechnology. In this Letter we demonstrate that the Bragg scattering of Cu(111) surface-state electrons by the periodic arrangement of tetracyanoquinodimethane molecules at the edges of self-assembled molecular islands, along with the dominant contribution of backscattering processes to the electronic density of states, discretizes the possible values of the electron momentum parallel to the island edge. The electronic structure consists thus of a discrete number of subbands which occur in a nonclosed space, and therefore without quantum confinement., The authors acknowledge financial support from the Spanish Ministry for Economy and Competitiveness [Grants No. FIS2015-67367-C2-1-P, No. FIS2015-72482- EXP, No. FIS2016-78591-C3-1-R, and the María de Maeztu Programme for Units of Excellence in R&D (No. MDM-2014-0377)], the regional government of Comunidad de Madrid (Grants No. S2013/MIT-3007, No. S2013/MIT-2850, and No. S2018/NMT-4321), Universidad Autónoma de Madrid (UAM/48), and IMDEA Nanoscience. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D(MINECO, Grant No.SEV-2016-0686).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic Decoupling of Graphene from Copper Induced by Deposition of ZnO: A Complex Substrate/Graphene/Deposit/Environment Interaction

  • Morales, Carlos
  • Urbanos, Fernando J.
  • Campo, Ángel Adolfo del
  • Leinen, Dietmar
  • Granados, Daniel
  • Rodríguez Barbero, Miguel Ángel
  • Soriano, Leonardo
This study presents experimental data of the interactions and reactions that occur during the early stages of the growth of ZnO on graphene supported on polycrystalline copper and the subsequent changes on the electronic properties of the graphene. The combination of substrate, graphene, and intercalated species (such as oxygen and water molecules) between graphene and copper due to air exposure, together to the evaporation of metallic zinc under oxygen atmosphere, induces the electronic decoupling of the graphene from copper by the formation of a nanometric layer of copper oxide. In particular, the final stage consists in the formation of a complex interface formed by ZnO/ZnO /Zn/G/CuO/Cu. The role of each actor is discussed in terms of a galvanic corrosion reaction of the metallic substrate where the graphene is the cathode and the initial deposition of metallic zinc accelerates the kinetics of this reaction, after which ZnO grows on the metallic zinc initially deposited. In this manner, the electronic properties of graphene can be engineered by the combination and interrelation of substrates, environment, and new-deposited materials, revealing a more complex and realistic picture for real fabrication processes. These results may help to improve the real applicability of graphene in mass production devices., This investigation was funded by the Ministerio de Economía y Competitividad of Spain through the FIS2015-67367-C2-1-P project and by the Comunidad de Madrid through the NANOMAGCOST-CM P2018/ NMT4321 project. One of the authors (C.M.) thanks Ministerio de Educación, Cultura y Deporte for a FPU grant. The authors also would like to thank SEGAINVEX (UAM) and SCAI (UMA) for technical support
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A strain tunable single-layer MoS2 photodetector

  • Gant, Patricia
  • Huang, Peng
  • Pérez de Lara, David
  • Guo, Dan
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can also be used to modify the characteristics of devices based on them. In this work, we study flexible and transparent photodetectors based on single-layer MoS2 under the application of biaxial strain. We find that by controlling the level of strain, we can tune the photoresponsivity (by 2–3 orders of magnitude), the response time (from <80 ms to 1.5 s), and the spectral bandwidth (with a gauge factor of 135 meV/% or 58 nm/%) of the device. © 2019 The Authors, This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE). ACG and PG acknowledge funding from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. DPdL acknowledges support from MINECO through the program FIS2015-67367-C2-1-p., Supplementary material, Peer reviewed