Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Throughput Characterization of Epitaxially Grown Single-Layer MoS2

  • Ghasemi, Foad
  • Frisenda, Riccardo
  • Dumcenco, Dumitru
  • Kis, Andras
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
The growth of single-layer MoS<sub>2</sub> with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS<sub>2</sub> crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate and have an area comprised between 10 µm<sup>2</sup> and 60 µm<sup>2</sup>. Differential reflectance measurements performed on these crystallites show that the area of the MoS<sub>2</sub> crystallites has an influence on the position and broadening of the B exciton while the orientation does not influence the A and B excitons of MoS<sub>2</sub>. These measurements demonstrate that differential reflectance measurements have the potential to be used to characterize the homogeneity of large-area chemical vapor deposition (CVD)-grown samples., Andres Castellanos-Gomez acknowledges support from the European Commission (Graphene Flagship: contract CNECTICT-604391), the MINECO (Ramón y Cajal 2014 program RYC-2014-01406 and program MAT2014-58399-JIN) and the Comunidad de Madrid (MAD2D-CM program S2013/MIT-3007). Riccardo Frisenda acknowledges support from The Netherlands Organisation for Scientific Research (NWO, Rubicon 680-50-1515). David Perez de Lara acknowledges support from the MINECO (program FIS2015-67367-C2-1-p). Andras Kis and Dimitri Dumcenco acknowledge funding from Swiss SNF Sinergia Grant No. 147607., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronics and optoelectronics of quasi-1D layered transition metal trichalcogenides

  • Island, Joshua O.
  • Molina-Mendoza, Aday J.
  • Barawi, Mariam
  • Biele, Robert
  • Flores, Eduardo
  • Clamagirand, José M.
  • Ares, José R.
  • Sánchez-Sánchez, Carlos
  • Zant, Herre S. J. van der
  • D'Agosta, Roberto
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The isolation of graphene and transition metal dichalcongenides has opened a veritable world to a great number of layered materials which can be exfoliated, manipulated, and stacked or combined at will. With continued explorations expanding to include other layered materials with unique attributes, it is becoming clear that no one material will fill all the post-silicon era requirements. Here we review the properties and applications of layered, quasi-1D transition metal trichalcogenides (TMTCs) as novel materials for next generation electronics and optoelectronics. The TMTCs present a unique chain-like structure which gives the materials their quasi-1D properties such as high anisotropy ratios in conductivity and linear dichroism. The range of band gaps spanned by this class of materials (0.2 eV-2 eV) makes them suitable for a wide variety of applications including field-effect transistors, infrared, visible and ultraviolet photodetectors, and unique applications related to their anisotropic properties which opens another degree of freedom in the development of next generation electronics. In this review we survey the historical development of these remarkable materials with an emphasis on the recent activity generated by the isolation and characterization of atomically thin titanium trisulfide (TiS3)., This work was supported by the Netherlands Organization for Scientific Research (NWO/FOM). AJM-M acknowledges the financial support of MINISTERIO DE CIENCIA E INNOVACIÓN (MICINN) (Spain) through the scholarship BES2012–057346. R.D’A and RB acknowledge financial support by the DYN-XC-TRANS (Grant No. FIS2013-43130-P), NanoTHERM (Grant No. CSD2010- 00044), and SElecT-DFT (FIS2016-79464-P) of the Ministerio de Economia y Competitividad (MINECO), and Grupo Consolidado UPV/EHU del Gobierno Basco (Grant No. IT578-13). RB acknowledges the financial support of the Ministerio de Educacion, Cultura y Deporte (Grant No. FPU12/01576). AC-G acknowledges financial support from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406) and from the MICINN (MAT2014-58399-JIN). MIRE Group thanks MINECO (MAT2015-65203R) for financial support. E Flores also acknowledges the Mexican National Council for Science and Technology (CONACyT)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gate tunable photovoltaic effect in MoS2 vertical p–n homostructures

  • Svatek, Simon A.
  • Antolín, Elisa
  • Lin, Der-Yuh
  • Frisenda, Riccardo
  • Reuter, Christoph
  • Molina-Mendoza, Aday J.
  • Muñoz Sánchez, Manuel
  • Ko, Tsung-Shine
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
p–n junctions based on vertically stacked single or few-layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, stable and substitutional doping of MoS2 into n- and p-type materials has been demonstrated. MoS2 is an interesting material for use in optoelectronic applications due to its potential of low-cost production in large quantities, strong light–matter interactions and chemical stability. Here we report the characterization of the optoelectronic properties of vertical homojunctions made by stacking few-layer flakes of MoS2:Fe (n-type) and MoS2:Nb (p-type). The junctions exhibit a peak external quantum efficiency of 4.7% and a maximum open circuit voltage of 0.51 V; they are stable in air; and their rectification characteristics and photovoltaic response are in excellent agreement with the Shockley diode model. The gate-tunability of the maximum output power, the ideality factor and the shunt resistance indicate that the dark current is dominated by trap-assisted recombination and that the photocurrent collection depends strongly on the spatial extent of the space charge region. We demonstrate a response time faster than 80 ms and highlight the potential to integrate such devices into quasi-transparent and flexible optoelectronics., S. A. S. and N. A. acknowledge funding from the European Commission through the FP7 ITN MOLESCO (Project Number 606728). E. A. gratefully acknowledges financial support from L’Oréal-UNESCO through the Women in Science program. A. J. M.-M. acknowledges the financial support from MICINN (Spain) through the scholarship BES-2012-057346. D. Y. and T. S. acknowledge the support from the Ministry of Science and Technology of the Republic of China under the MOST 104-2112-M-018-004 and 104-2221-E-018-017. D. P. is thankful for funding from the Spanish Ministry of Economy and Competitiveness through FIS2015-67367-C2-1-P. R. F. thanks the Netherlands Organisation for Scientific Research (NWO) for the financial support through the research programme Rubicon with the project number 680-50-1515. AC-G. acknowledges the support from the BBVA Foundation through the fellowship “I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales” (“Semiconductores ultradelgados: hacia la optoelectronica flexible”), from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406), from the MICINN (MAT2014-58399-JIN) and from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)), and the European Commission under the Graphene Flagship, contract CNECTICT-604391., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong quantum confinement effect in the optical properties of ultrathin α-In2Se3

  • Quereda, Jorge
  • Biele, Robert
  • Rubio-Bollinger, Gabino
  • Agraït, Nicolás
  • D'Agosta, Roberto
  • Castellanos-Gómez, Andrés
The effect of quantum confinement in the optical absorption spectra of atomically thin α‐In2Se3 crystals is studied, observing a huge thickness‐dependent shift in the optical band gap of exfoliated α‐In2Se3 flakes. The band gap variation reported here is among the largest found in semiconductor crystals and spans a region of the near‐UV spectrum uncovered by other 2D semiconductors., G.R.‐B., N.A., and J.Q. acknowledge financial support from MICINN/MINECO through program MAT2014‐57915‐R and from Comunidad Autónoma de Madrid through program S2013/MIT‐3007 (MAD2D). A.C.‐G. acknowledges financial support from the BBVA Foundation through the fellowship “I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales,” from the MINECO (Ramón y Cajal 2014 program, RYC‐2014‐01406), and from the MICINN(MAT2014‐58399‐JIN). R.D'A. and R.B. acknowledge financial support by the DYN‐XC‐TRANS (Grant No. FIS2013‐43130‐P) and NanoTHERM (Grant No. CSD2010‐00044) of the Ministerio de Economía y Competitividad (MINECO), and Grupo Consolidado UPV/EHU del Gobierno Basco (Grant No. IT578‐13).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photodiodes based in La0.7Sr0.3MnO3/single layer MoS2 hybrid vertical heterostructures

  • Niu, Yue
  • Frisenda, Riccardo
  • Svatek, Simon A.
  • Orfila, Gloria
  • Gallego-Marcos, Fernando
  • Gant, Patricia
  • Agra, Nicolás
  • León, Carlos
  • Rivera-Calzada, Alberto
  • Pérez de Lara, David
  • Santamaría, Jacobo
  • Castellanos-Gómez, Andrés
The fabrication of artificial materials by stacking of individual two-dimensional (2D) materials is amongst one of the most promising research avenues in the field of 2D materials. Moreover, this strategy to fabricate new man-made materials can be further extended by fabricating hybrid stacks between 2D materials and other functional materials with different dimensionality making the potential number of combinations almost infinite. Among all these possible combinations, mixing 2D materials with transition metal oxides can result especially useful because of the large amount of interesting physical phenomena displayed separately by these two material families. We present a hybrid device based on the stacking of a single layer MoS onto a lanthanum strontium manganite (LaSrMnO) thin film, creating an atomically thin device. It shows a rectifying electrical transport with a ratio of 10, and a photovoltaic effect with V up to 0.4 V. The photodiode behaviour arises as a consequence of the different doping character of these two materials. This result paves the way towards combining the efforts of these two large materials science communities., Work at IMDEA was supported by MINECO (Ramón y Cajal 2014 program RYC-2014-01406, MAT2014-58399-JIN, FIS2015-67367-C2-1-P), the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and NANOFRONTMAG-CM program (S2013/MIT-2850) and the European Commission under the Graphene Flagship (contract CNECTICT-604391) and FP7 ITN MOLESCO (project no. 606728). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File NO. 201506120102). Work at UCM supported by Spanish MINECO through grants MAT2014-52405-C02-01 and by CAM through grant CAM S2013/MIT-2740. Work at ICMM is supported by Spanish MINECO through grant MAT2014-52405-C02-02.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lithography-free electrical transport measurements on 2D materials by direct microprobing

  • Gant, Patricia
  • Niu, Yue
  • Svatek, Simon A.
  • Agraït, Nicolás
  • Munuera, C.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Pérez de Lara, David
  • Castellanos-Gómez, Andrés
We present a method to carry out electrical and optoelectronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts with the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS devices fabricated by the conventional lithographic process. We also show that this method can be used with other 2D materials., We acknowledge funding from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from the EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies), from the FP7 ITN MOLESCO (project no. 606728), from the MINECO (Ramón y Cajal 2014 program RYC-2014-01406, RYC-2014-16626, MAT2014-58399-JIN and FIS2015-67367-C2-1-P), from the Comunidad de Madrid (MAD2D-CM Program (S2013/MIT-3007)) and the NANOFRONTMAG-CM program (S2013/MIT-2850). RF acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. YN acknowledges the grant from the China Scholarship Council (File no. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Franckeite as a naturally occurring van der Waals heterostructure

  • Molina-Mendoza, Aday J
  • Giovanelli, Emerson
  • Paz, Wendel S.
  • Niño, Miguel Ángel
  • Island, Joshua O.
  • Evangeli, Charalambos
  • Aballe, Lucía
  • Foerster, Michael
  • van der Zant, Herre S. J.
  • Rubio-Bollinger, Gabino
  • Agraït, Nicolás
  • Palacios, J. J.
  • Pérez, Emilio M.
  • Castellanos-Gómez, Andrés
The fabrication of van der Waals heterostructures, artificial materials assembled by individual stacking of 2D layers, is among the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods, which are cumbersome and tend to suffer from poor control over the lattice orientations and the presence of unwanted interlayer adsorbates. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors., A.C.-G. acknowledges financial support from the BBVA Foundation through the fellowship ‘I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales’ (‘Semiconductores ultradelgados: hacia la optpelectronica flexible’), from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406), from the MICINN (MAT2014-58399-JIN) and from European Commission under the Graphene Flagship, contract CNECTICT-604391. E.M.P. acknowledges financial support from the European Research Council (MINT, ERC-StG-307609) and from the MINECO of Spain (CTQ2014-60541-P). E.G. gratefully acknowledges the AMAROUT II fellowship program for receiving a grant for transnational mobility (Marie Curie Action, FP7-PEOPLE-2011-COFUND (291803)). A.J.M.-M., G.R.-B. and N.A. acknowledge the support of the MICCINN/MINECO (Spain) through the programmes MAT2014-57915-R, BES-2012-057346 and FIS2011-23488 and Comunidad de Madrid (Spain) through the programme S2013/MIT-3007 (MAD2D). J.O.I. and H.S.J.v.d.Z. acknowledge the support of the Dutch organization for Fundamental Research on Matter (FOM) and by the Ministry of Education, Culture, and Science (OCW). M.A.N. acknowledeges the support of the MICCINN/MINECO (Spain) through the programmes MAT2013-49893-EXP and MAT2014-59315-R. Authors M.A.N., A.J.M.-M. and A.C.-G. acknowledge the support from ALBA Synchrotron for the experiments performed at Circe beamline (BL24-CIRCE) at ALBA Synchrotron with the collaboration of ALBA staff (proposal ID 2015091399). W.S.P. acknowledges CAPES Foundation, Ministry of Education of Brazil, under grant BEX 9476/13-0. W.S.P. and J.J.P. acknowledge MICCINN/MINECO (Spain) for financial support under grant FIS2013-47328-C02-1; the European Union structural funds and the Comunidad de Madrid MAD2D-CM programme under grant nos. P2013/MIT-3007 and P2013/MIT-2850; the Generalitat Valenciana under grant no. PROMETEO/2012/011. W.S.P. and J.J.P. also acknowledge the computer resources and assistance provided by the Centro de Computación Científica of the Universidad Autónoma de Madrid and the RES., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Franckeite as a naturally occurring van der Waals heterostructure

  • Molina-Mendoza, Aday J.
  • Giovanelli, Emerson
  • Paz, Wendel S.
  • Niño, Miguel Ángel
  • Island, Joshua O.
  • Evangeli, Charalambos|||0000-0003-3867-8530
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • van der Zant, Herre S. J.
  • Rubio-Bollinger, Gabino
  • Agraït, Nicolás
  • Palacios, Juan Jose|||0000-0003-2378-0866
  • Pérez, Emilio M.
  • Castellanos Gómez, Andrés|||0000-0002-3384-3405
The fabrication of van der Waals heterostructures, artificial materials assembled by individual stacking of 2D layers, is among the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods, which are cumbersome and tend to suffer from poor control over the lattice orientations and the presence of unwanted interlayer adsorbates. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS 2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors.