Skip to main content

FOTOGENERACION-COMPRESION DE H2 MEDIANTE TRISULFUROS SEMICONDUCTORES NANOMETRICOS E HIDRUROS METALICOS

MAT2015-65203-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polarization‐Sensitive and Broadband Photodetection Based on a Mixed‐Dimensionality TiS3/Si p–n Junction

  • Niu, Yue
  • Frisenda, Riccardo
  • Flores, Fernando
  • Ares, José R.
  • Jiao, Weicheng
  • Pérez de Lara, David
  • Sánchez López, Carlos
  • Wang, Rongguo
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The capability to detect the polarization state of light is crucial in many day‐life applications and scientific disciplines. Novel anisotropic 2D materials such as TiS3 combine polarization sensitivity, given by the in‐plane optical anisotropy, with excellent electrical properties. Here, the fabrication of a monolithic polarization‐sensitive broadband photodetector based on a mixed‐dimensionality TiS3/Si p–n junction is demonstrated. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350%, and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization‐sensitive systems such as polarimeters., The authors acknowledge funding from the EU Graphene Flagship (Grant Graphene Core2 785219) and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC‐StG 2017 project 2D‐TOPSENSE). R.F. acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680‐50‐1515. D.P.d.L. acknowledges support from the MINECO (program FIS2015‐67367‐C2‐1‐P). Y.N. acknowledges the grant from the China Scholarship Council (File No. 201506120102). W.C.J. acknowledges the Program for the Top Young and Middle‐aged Innovative Talents of Harbin Institute of Technology. MIRE group acknowledges financial support from MINECO‐FEDER (MAT2015‐65203‐R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronics and optoelectronics of quasi-1D layered transition metal trichalcogenides

  • Island, Joshua O.
  • Molina-Mendoza, Aday J.
  • Barawi, Mariam
  • Biele, Robert
  • Flores, Eduardo
  • Clamagirand, José M.
  • Ares, José R.
  • Sánchez-Sánchez, Carlos
  • Zant, Herre S. J. van der
  • D'Agosta, Roberto
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The isolation of graphene and transition metal dichalcongenides has opened a veritable world to a great number of layered materials which can be exfoliated, manipulated, and stacked or combined at will. With continued explorations expanding to include other layered materials with unique attributes, it is becoming clear that no one material will fill all the post-silicon era requirements. Here we review the properties and applications of layered, quasi-1D transition metal trichalcogenides (TMTCs) as novel materials for next generation electronics and optoelectronics. The TMTCs present a unique chain-like structure which gives the materials their quasi-1D properties such as high anisotropy ratios in conductivity and linear dichroism. The range of band gaps spanned by this class of materials (0.2 eV-2 eV) makes them suitable for a wide variety of applications including field-effect transistors, infrared, visible and ultraviolet photodetectors, and unique applications related to their anisotropic properties which opens another degree of freedom in the development of next generation electronics. In this review we survey the historical development of these remarkable materials with an emphasis on the recent activity generated by the isolation and characterization of atomically thin titanium trisulfide (TiS3)., This work was supported by the Netherlands Organization for Scientific Research (NWO/FOM). AJM-M acknowledges the financial support of MINISTERIO DE CIENCIA E INNOVACIÓN (MICINN) (Spain) through the scholarship BES2012–057346. R.D’A and RB acknowledge financial support by the DYN-XC-TRANS (Grant No. FIS2013-43130-P), NanoTHERM (Grant No. CSD2010- 00044), and SElecT-DFT (FIS2016-79464-P) of the Ministerio de Economia y Competitividad (MINECO), and Grupo Consolidado UPV/EHU del Gobierno Basco (Grant No. IT578-13). RB acknowledges the financial support of the Ministerio de Educacion, Cultura y Deporte (Grant No. FPU12/01576). AC-G acknowledges financial support from the European Commission under the Graphene Flagship, contract CNECTICT-604391, from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406) and from the MICINN (MAT2014-58399-JIN). MIRE Group thanks MINECO (MAT2015-65203R) for financial support. E Flores also acknowledges the Mexican National Council for Science and Technology (CONACyT)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beyond Mono-, Di-, and Trisulfides: Synthesizing vanadium tetrasulfide (VS4) films for energy conversion

  • Flores, Eduardo
  • Muñoz-Cortés, Esmeralda
  • Bodega, Julio
  • Caballero-Calero, Olga
  • Martín-González, Marisol
  • Sánchez, Carlos
  • Ares, José R.
  • Ferrer, Isabel J.
Vanadium tetrasulfide (VS4, called patronite as a mineral) is a one-dimensional compound with promising properties for energy conversion applications. However, it has been scarcely investigated because of its complex synthesis. In this work, we report a detailed investigation about the formation mechanism of VS4 (V4+(S22–)2) as well as its structural, transport, and photoelectrochemical properties. To this aim, VS4 films were grown by a solid–gas reaction process between vanadium films and sulfur at temperatures between 350 and 450 °C during different reaction times. Film characterization (X-ray diffraction, energy-dispersive analysis of X-ray, micro-Raman spectroscopy, and scanning electron microscopy) reveals the formation of monoclinic VS4 nanorods (I2/C) as single crystalline phase in very short reaction times (t < 5 h). Optical characterization was carried out by reflectance and transmittance measurements to obtain the optical absorption coefficient (α = 104 cm–1 at photon energies higher than 1.6 eV). From these measurements, a direct optical band gap of 1.35 ± 0.05 eV is obtained. Additionally, VS4 films were used as photoanodes of a photoelectrochemical cell (PEC) with a platinum foil as counter electrode and a Ag/AgCl reference electrode to characterize the VS4/electrolyte (aqueous 0.5 M Na2SO3) interface. Finally, the evolved hydrogen under 200 mW/cm2 white light illumination over the VS4/interface at 0.3 V (Ag/AgCl) bias potential was quantified by a quadrupole mass spectrometer (QMS) reaching fluxes of ∼20 μmol/h., The authors are thankful for the technical support from Mr. F. Moreno. E.F. acknowledges the Mexican National Council for Science and Technology (CONACyT) for providing the funding necessary to complete his Ph.D. Authors from the MIRE Group acknowledge financial support by MINECO-FEDER (MAT2015-65203R). M.M.-G. and O.C.-C. acknowledge financial support by INFANTE (PIE 201550E072) and MINECO-FEDER (MAT2017-86450-C4-3-R) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An XPS investigation on the influence of the substrate and growth conditions on pyrite thin films surface composition

  • Morales, Carlos
  • Flores, Eduardo
  • Yoda, Satoko
  • Niño, Miguel Ángel
  • Martín y Marero, David
  • Soriano, Leonardo
  • Rojo, J. M.
  • Ares, Jose Ramón
  • Ferrer, Isabel J.
  • Sánchez, Carlos
Pyrite thin films have been prepared by sulfuration of Fe thin films deposited on sodalime glass substrates. Sulfuration temperatures have ranged from 200 °C to 500 °C and sulfuration time has been 20 h in all cases. It has been found that, during the sulfuration process, Na from the substrate diffuses through the formed pyrite thin film and reaches its surface where it reacts with some components of the sulfuration atmosphere to form sodium sulfate (NaSO). The Na concentration at the film surface has been measured as a function of the film sulfuration temperature. Obtained experimental data show that Na surface concentration increases up to a sulfuration temperature of 350 °C but, on passing from this temperature to 400 °C, a drastic reduction is produced. For higher sulfuration temperatures (T > 400 ° C) the Na surface concentration slightly increases. Besides, a chemical variation of the pyrite surface composition related to an excess of sulfur is measured as a function of the sulfuration temperature showing a quite parallel behavior to that shown by the Na surface concentration. This excess of sulfur appears regardless the type of substrate (sodalima glass, alumina or amorphous quartz) used. The obtained results have been correlated with the variations of other parameters (grain and crystallite size, thickness, etc.) of the sulfurated films. After these investigations, it has been concluded that the Na concentration evolution at the film surface closely reflects the pyrite thin film grain crystallization (and size) which takes place during the sulfuration process. As a consequence, it is proposed that a change of the Na diffusion mechanism through the film (from diffusion through the grain boundaries to diffusion through the grain bulk) takes place at the indicated critical sulfuration temperatures. The reported excess of sulfur might be also related to this crystallization, although no further evidence has been obtained from our results. The consequences of this conclusion are discussed on the light of present pyrite thin film knowledge, mainly those aspects concerning to possible doping effects of Na and electrical transport processes in pyrite thin films., The authors thank technical support from Mr. F. Moreno. Financial support by MINECO-FEDER (MAT2015-65203R) is acknowledged and the project INFANTE (PIE 201550E072) is also recognized. Carlos Morales thanks the Ministerio de Educación Cultura y Deporte of Spain for the FPU grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrite thin films on amorphous substrates: Interaction with the substrate and doping effects

  • Flores, Eduardo
  • Yoda, Satoko
  • Morales, Carlos
  • Caballero-Calero, Olga
  • Díaz-Chao, Pablo
  • Martín-González, Marisol
  • Ares, José R.
  • Ferrer, Isabel J.
  • Sánchez, Carlos
Recent published literature dealing with FeS pyrite (thin films and single crystals) faces a few and relevant issues: the low photovoltage presented by pyrite (mainly related to the singular nature of its surface), the not yet clearly defined way of making available n and p type reliable samples and the relevance of their stoichiometry. To address the second and third issues, Fe thin films, Ti/Fe and Co/Fe bilayers deposited on sodalime glass and amorphous quartz substrates have been sulfurated at different temperatures (T) (T ≲ 600C) during 20 h to obtain pyrite thin films. Seebeck coefficient and Hall Effect measurements have been carried out at room temperature with the sulfurated samples. It has been found that sulfurated Ti/Fe on sodalime glass presents a change of the Seebeck coefficient sign (from negative to positive) due to a strong interaction of the Ti layer with the substrate, which is not present in the Ti/Fe samples deposited on amorphous quartz. As a consequence of the interaction, a new TiO layer is formed between the sodalime glass substrate and the pyrite layer. Sulfurated Co/Fe bilayers on sodalime glass show a coherent behavior according to the obtained results and previously published works. They all appear to be n-type semiconductors when T ≳ 175C. Non-intentionally doped Fe thin films on sodalime glass behave in a non-conclusive fashion from the point of view of their electrical transport characterization. The Seebeck coefficient (S) of the sulfurated films appear to be S > 0 for all values of T. However, the value and sign of the Hall constant behave in a non-reproducible way. Results are discussed on the light of present knowledge of synthetic pyrite thin films growth and doping., The authors thank technical support from Mr. F. Moreno. Financial support by MINECO-FEDER (MAT2015-65203R) is acknowledged and the project INFANTE (PIE 201550E072) is also recognized. Carlos Morales thanks the Ministerio de Educación Cultura y Deporte of Spain for the FPU grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unconventional approaches to hydrogen sorption reactions: Non‐thermal and non‐straightforward thermally driven methods

  • Ares, José R.
  • Nevshupa, Roman
  • Muñoz-Cortés, Esmeralda
  • Sánchez, Carlos
  • Leardini, Fabrice
  • Ferrer, Isabel J.
  • Minh Huy Tran, Vo
  • Aguey‐Zinsou, Francois
  • Fernández Lozano, José Francisco
In the last decades, a broad family of hydrides have attracted attention as prospective hydrogen storage materials of very high gravimetric and volumetric capacity, fast H2‐sorption kinetics, environmental friendliness and economical affordability. However, constraints due to their high activation energies of the different H2‐sorption steps and the Gibbs energy of their reaction with H2 has led to the need of high thermal energy to drive H2 uptake and release. High heat leads to significant degradation effects (recrystallization, phase segregation, nanoparticles agglomeration…) of the hydrides. In this context, this short review aims to summarize alternative non‐thermal methods and non‐straightforward thermally driven methods to overcome the previous constraints. The phenomenology lying behind these methods, i. e. tribological activation, sonication, and electromagnetic radiation, and the effect of these processes on hydrogen sorption properties of hydrides are described. These non‐usual approaches could boost the capability of the next generation of solid‐hydride materials for hydrogen conversion in energy sector, in mobile devices and as hydrogen reservoirs., MIRE group thanks Spanish MINECO for funding support through grant MAT2015‐65203‐R. Technical assistance by Mr. Fernando Moreno is also gratefully acknowledged. MERLIN group acknowledges the financial support by UNSW Internal Research Grant program as well as the Office of Naval Research (Award No: ONRG‐NICOP‐N62909‐16‐1‐2155). We appreciate the use of instruments in the Mark Wainwright Analytical Centre at UNSW. Finally, Dr. R. Revshupa thanks to the grant BIA2016‐79582‐R supported by Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reactivity of a FeS Surface under Room Temperature Exposure to Nitrogen and H2S

  • Niño, Miguel Ángel
  • Flores, Eduardo
  • Sánchez, Carlos
  • Rojo, Juan M.
The reactivity of an iron monosulfide surface exposed at room temperature to molecular nitrogen and hydrogen sulfide has been investigated using X-ray photoemission spectroscopy (XPS) and thermal desorption spectroscopy (TDS). We have observed adsorption of nitrogen at room temperature that depends on the surface nanostructure and on the electronic state of nitrogen. The subsequent reaction of this adsorbed nitrogen with hydrogen sulfide results in depletion of the nitrogen surface content which can be interpreted in terms of ammonia formation. The XPS nitrogen N 1s core level line shape shows different components one of which seems to be the most reactive one in the ensuing H2S reaction., M.A.N. acknowledges the support of MICCIN/MINECO through the programmes MAT2013-49893-EXP and MAT2014-59315-R. The MIRE group acknowledges the financial support of MINECO under project MAT2015-65203-R. E.F. thanks CONACYT for his Ph.D. grant., Peer reviewed