Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Reversible dispersion and release of carbon nanotubes: Via cooperative clamping interactions with hydrogen-bonded nanorings

  • Chamorro, Raquel
  • Juan-Fernández, Leire de
  • Nieto-Ortega, Belén
  • Mayoral, María José
  • Casado, Santiago
  • Ruiz-González, Luisa
  • Pérez, Emilio M.
  • González Rodríguez, David
Due to their outstanding electronic and mechanical properties, single-walled carbon nanotubes (SWCNTs) are promising nanomaterials for the future generation of optoelectronic devices and composites. However, their scarce solubility limits their application in many technologies that demand solution-processing of high-purity SWCNT samples. Although some non-covalent functionalization approaches have demonstrated their utility in extracting SWCNTs into different media, many of them produce short-lived dispersions or ultimately suffer from contamination by the dispersing agent. Here, we introduce an unprecedented strategy that relies on a cooperative clamping process. When mixing (6,5)SWCNTs with a dinucleoside monomer that is able to self-assemble in nanorings via Watson-Crick base-pairing, a synergistic relationship is established. On one hand, the H-bonded rings are able to associate intimately with SWCNTs by embracing the tube sidewalls, which allows for an efficient SWCNT debundling and for the production of long-lasting SWCNT dispersions of high optical quality along a broad concentration range. On the other, nanoring stability is enhanced in the presence of SWCNTs, which are suitable guests for the ring cavity and contribute to the establishment of multiple cooperative noncovalent interactions. The inhibition of these reversible interactions, by just adding, for instance, a competing solvent for hydrogen-bonding, proved to be a simple and effective method to recover the pristine nanomaterial with no trace of the dispersing agent., Funding from the European Union (ERC-Starting Grants: 279548 (DGR) and 307609 (EMP)), MINECO (Grants: CTQ2014- 57729-P (DGR) and CTQ2014-60541-P (EMP), FPU13/03371 (LdJ), JdC-2015-23531 postdoctoral fellowship (BNO)) and the Comunidad de Madrid (Grant: MAD2D-CM program S2013/ MIT-3007 (EMP)) is gratefully acknowledged. IMDEA Nanociencia acknowledges support from the 'Severo Ochoa' Programme for Centres of Excellence in R&D (MINECO, Grant SEV- 2016-0686).
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Positive and negative regulation of carbon nanotube catalysts through encapsulation within macrocycles

  • Blanco Fernández, Matías
  • Nieto Ortega, Belén
  • Juan Garrudo, Alberto de
  • Vera Hidalgo, Mariano
  • López Moreno, Alejandro
  • Casado, Santiago
  • González, Luisa R.
  • Sawada, Hidetaka
  • González Calbet, José M.
  • Pérez, Emilio M.
One of the most attractive applications of carbon nanomaterials is as catalysts, due to their extreme surface-to-volume ratio. The substitution of C with heteroatoms (typically B and N as p- and n-dopants) has been explored to enhance their catalytic activity. Here we show that encapsulation within weakly doping macrocycles can be used to modify the catalytic properties of the nanotubes towards the reduction of nitroarenes, either enhancing it (n-doping) or slowing it down (p-doping). This artificial regulation strategy presents a unique combination of features found in the natural regulation of enzymes: binding of the effectors (the macrocycles) is noncovalent, yet stable thanks to the mechanical link, and their effect is remote, but not allosteric, since it does not affect the structure of the active site. By careful design of the macrocycles' structure, we expect that this strategy will contribute to overcome the major hurdles in SWNT-based catalysts: activity, aggregation, and specificity., Funding from the European Union (ERC-Starting Grant: 307609 (to E.M.P.)), MINECO (Grants: CTQ2014-60541-P (to E.M.P.), JdC-2015-23531 postdoctoral fellowship (to B.N.-O.)), and the Comunidad de Madrid (Grant: MAD2D-CM program S2013/MIT-3007 (to E.M.P.)) is gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686)
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Threading through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers

  • Nieto-Ortega B.
  • Moffa M.
  • De Juan A.
  • Bernal M.M.
  • Fernández-Blázquez J.P.
  • Vilatela J.J.
  • Pisignano D.
  • Pérez, Emilio M.
  • López-Moreno, Alejandro
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Hydrogen-bonded host–guest systems are stable in ionic liquids

  • Naranjo T.
  • Álvarez-Asencio R.
  • Pedraz P.
  • Nieto-Ortega B.
  • Silva S.M.-D.
  • Burzurí E.
  • Rutland M.W.
  • Pérez, Emilio M.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Reversible dispersion and release of carbon nanotubes: Via cooperative clamping interactions with hydrogen-bonded nanorings

  • Chamorro R.
  • De Juan-Fernández L.
  • Nieto-Ortega B.
  • Mayoral M.J.
  • Casado S.
  • Ruiz-González L.
  • González-Rodríguez D.
  • Pérez, Emilio M.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanically interlocked single-wall sarbon nanotubes

  • Juan, Alberto de
  • Pouillon, Yann
  • Martín, Nazario
  • Rubio, Angel
  • Pérez, Emilio M.
Extensive research has been devoted to the chemical manipulation of carbon nanotubes. The attachment of molecular fragments through covalent-bond formation produces kinetically stable products, but implies the saturation of some of the C[BOND]C double bonds of the nanotubes. Supramolecular modification maintains the structure of the SWNTs but yields labile species. Herein, we present a strategy for the synthesis of mechanically interlocked derivatives of SWNTs (MINTs). In the key rotaxane-forming step, we employed macrocycle precursors equipped with two π-extended tetrathiafulvalene SWNT recognition units and terminated with bisalkenes that were closed around the nanotubes through ring-closing metathesis (RCM). The mechanically interlocked nature of the derivatives was probed by analytical, spectroscopic, and microscopic techniques, as well as by appropriate control experiments. Individual macrocycles were observed by HR STEM to circumscribe the nanotubes., A.d.J and E.M.P. are grateful for funding from the European Research Council (Starting Independent Research Grant MINT; ERC-2012-StG Proposal No. 307609) and the Spanish MINECO (CTQ2011-25714). N.M. acknowledges funding from the Spanish MINECO (CTQ2011-24652) and the Comunidad Autónoma de Madrid (MADRISOLAR-2 S2009/PPQ-1533). Y.P. and A.R. acknowledge funding from the European Research Council (Advanced Grant DYNamo; ERC-2010-AdG Proposal No. 267374), CRONOS (Grant number 280879-2 CRONOS CP-FP7), POCAONTAS (FP7-PEOPLE-2012-ITN-Project 316633), and the Spanish Grants FIS2010-21282-C02-01, as well as the “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-578-13). A.T.-P. was supported by a PICATA postdoctoral fellowship of the Moncloa Campus of International Excellence (UCM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of highly crystalline lead iodide nanosheets prepared by room-temperature solution processing

  • Frisenda, Riccardo
  • Island, Joshua O.
  • Lado, Jose L.
  • Giovanelli, Emerson
  • Gant, Patricia
  • Nagler, Philipp
  • Bange, Sebastian
  • Lupton, John M.
  • Schüller, Christian
  • Molina-Mendoza, Aday J.
  • Aballe, Lucía
  • Foerster, Michael
  • Korn, Tobias
  • Angel Niño, Miguel
  • Pérez de Lara, David
  • Pérez, Emilio M.
  • Fernández-Rossier, Joaquín
  • Castellanos-Gómez, Andrés
Two-dimensional (2D) semiconducting materials are particularly appealing for many applications. Although theory predicts a large number of 2D materials, experimentally only a few of these materials have been identified and characterized comprehensively in the ultrathin limit. Lead iodide, which belongs to the transition metal halides family and has a direct bandgap in the visible spectrum, has been known for a long time and has been well characterized in its bulk form. Nevertheless, studies of this material in the nanometer thickness regime are rather scarce. In this article we demonstrate an easy way to synthesize ultrathin, highly crystalline flakes of PbI by precipitation from a solution in water. We thoroughly characterize the produced thin flakes with different techniques ranging from optical and Raman spectroscopy to temperature-dependent photoluminescence and electron microscopy. We compare the results to ab initio calculations of the band structure of the material. Finally, we fabricate photodetectors based on PbI and study their optoelectronic properties., We acknowledge financial support from the European Commission under the Graphene Flagship (CNECTICT-604391), and European Research Council (ERC-StG-MINT 307609), the MINECO, the Comunidad de Madrid, the Netherlands Organisation for Scientific Research (NWO), and the German Science Foundation (DFG). JLL and JFR acknowledge financial support by Marie-Curie-ITN 607904-SPINOGRAPH. JFR acknowledges financial support from MEC-Spain (MAT2016-78625-C2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled covalent functionalization of 2 H‐MoS2 with molecular or polymeric adlayers

  • Quirós‐Ovies, Ramiro
  • Vázquez Sulleiro, Manuel
  • Vera‐Hidalgo, Mariano
  • Prieto Serrano, Javier
  • Gómez, I. Jénnifer
  • Sebastián, Víctor
  • Ricote, J.
  • Pérez, Emilio M.
Special Issue: Chemical Functionalization of 2D Materials. This article also appears in: Chemical Functionalization of 2D Materials Society Volumes: Czech Republic., Most air‐stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS2, the semiconducting 2 H‐MoS2 is much less reactive than its metallic counterpart, 1T‐MoS2. As a consequence, there are hardly any reliable methods for the covalent modification of 2 H‐MoS2. An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H‐MoS2 with maleimides is presented. The use of a base (Et3N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS2. In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H‐MoS2 in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used., The European Research Council (ERC‐StG‐307609; ERC‐PoC‐ ERC‐AdG‐742684), MINECO (CTQ2017‐86060‐P and CTQ2016‐79419‐R) the Comunidad de Madrid (MAD2D‐CM S2013/ MIT‐3007) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV‐ 2016‐0686). Part of the work was carried out with the support of CEITEC Nano Research Infrastructure (ID LM2015041, MEYS CR, 2016–2019), CEITEC Brno University of Technology., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Covalent cross-linking of 2H-MoS nanosheets

  • Vázquez Sulleiro, Manuel
  • Quirós‐Ovies, Ramiro
  • Vera‐Hidalgo, Mariano
  • Gómez, I. Jénnifer
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Pérez, Emilio M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials., The European Research Council (ERC-StG-307609; ERC-PoC-842606; ERC-AdG-742684), MINECO (CTQ2017-86060-P and CTQ2016-79419-R) the Comunidad de Madrid (MAD2D-CM S2013/ MIT-3007), CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV- 2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Franckeite as a naturally occurring van der Waals heterostructure

  • Molina-Mendoza, Aday J
  • Giovanelli, Emerson
  • Paz, Wendel S.
  • Niño, Miguel Ángel
  • Island, Joshua O.
  • Evangeli, Charalambos
  • Aballe, Lucía
  • Foerster, Michael
  • van der Zant, Herre S. J.
  • Rubio-Bollinger, Gabino
  • Agraït, Nicolás
  • Palacios, J. J.
  • Pérez, Emilio M.
  • Castellanos-Gómez, Andrés
The fabrication of van der Waals heterostructures, artificial materials assembled by individual stacking of 2D layers, is among the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods, which are cumbersome and tend to suffer from poor control over the lattice orientations and the presence of unwanted interlayer adsorbates. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors., A.C.-G. acknowledges financial support from the BBVA Foundation through the fellowship ‘I Convocatoria de Ayudas Fundacion BBVA a Investigadores, Innovadores y Creadores Culturales’ (‘Semiconductores ultradelgados: hacia la optpelectronica flexible’), from the MINECO (Ramón y Cajal 2014 program, RYC-2014-01406), from the MICINN (MAT2014-58399-JIN) and from European Commission under the Graphene Flagship, contract CNECTICT-604391. E.M.P. acknowledges financial support from the European Research Council (MINT, ERC-StG-307609) and from the MINECO of Spain (CTQ2014-60541-P). E.G. gratefully acknowledges the AMAROUT II fellowship program for receiving a grant for transnational mobility (Marie Curie Action, FP7-PEOPLE-2011-COFUND (291803)). A.J.M.-M., G.R.-B. and N.A. acknowledge the support of the MICCINN/MINECO (Spain) through the programmes MAT2014-57915-R, BES-2012-057346 and FIS2011-23488 and Comunidad de Madrid (Spain) through the programme S2013/MIT-3007 (MAD2D). J.O.I. and H.S.J.v.d.Z. acknowledge the support of the Dutch organization for Fundamental Research on Matter (FOM) and by the Ministry of Education, Culture, and Science (OCW). M.A.N. acknowledeges the support of the MICCINN/MINECO (Spain) through the programmes MAT2013-49893-EXP and MAT2014-59315-R. Authors M.A.N., A.J.M.-M. and A.C.-G. acknowledge the support from ALBA Synchrotron for the experiments performed at Circe beamline (BL24-CIRCE) at ALBA Synchrotron with the collaboration of ALBA staff (proposal ID 2015091399). W.S.P. acknowledges CAPES Foundation, Ministry of Education of Brazil, under grant BEX 9476/13-0. W.S.P. and J.J.P. acknowledge MICCINN/MINECO (Spain) for financial support under grant FIS2013-47328-C02-1; the European Union structural funds and the Comunidad de Madrid MAD2D-CM programme under grant nos. P2013/MIT-3007 and P2013/MIT-2850; the Generalitat Valenciana under grant no. PROMETEO/2012/011. W.S.P. and J.J.P. also acknowledge the computer resources and assistance provided by the Centro de Computación Científica of the Universidad Autónoma de Madrid and the RES., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Controlled Covalent Functionalization of 2 H-MoS2 with Molecular or Polymeric Adlayers

  • Quirós-Ovies, R.
  • Vázquez Sulleiro, M.
  • Vera-Hidalgo, M.
  • Prieto, J.
  • Gómez, I.J.
  • Sebastián, V.
  • Santamaría, J.
  • Pérez, E.M.
Most air-stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS2, the semiconducting 2 H-MoS2 is much less reactive than its metallic counterpart, 1T-MoS2. As a consequence, there are hardly any reliable methods for the covalent modification of 2 H-MoS2. An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H-MoS2 with maleimides is presented. The use of a base (Et3N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS2. In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H-MoS2 in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Covalent Cross-Linking of 2H-MoS2 Nanosheets

  • Vázquez Sulleiro, M.
  • Quirós-Ovies, R.
  • Vera-Hidalgo, M.
  • Gómez, I.J.
  • Sebastián, V.
  • Santamaría, J.
  • Pérez, E.M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Franckeite as a naturally occurring van der Waals heterostructure

  • Molina-Mendoza, Aday J.
  • Giovanelli, Emerson
  • Paz, Wendel S.
  • Niño, Miguel Ángel
  • Island, Joshua O.
  • Evangeli, Charalambos|||0000-0003-3867-8530
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • van der Zant, Herre S. J.
  • Rubio-Bollinger, Gabino
  • Agraït, Nicolás
  • Palacios, Juan Jose|||0000-0003-2378-0866
  • Pérez, Emilio M.
  • Castellanos Gómez, Andrés|||0000-0002-3384-3405
The fabrication of van der Waals heterostructures, artificial materials assembled by individual stacking of 2D layers, is among the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods, which are cumbersome and tend to suffer from poor control over the lattice orientations and the presence of unwanted interlayer adsorbates. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS 2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors.