Skip to main content

TECNOLOGIAS AVANZADAS DE ADSORCION, DETECCION SERS Y CATALISIS PARA GUERRA QUIMICA

CTQ2016-79419-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Functionalization of 3D printed ABS filters with MOF for toxic gas removal

  • Pellejero, Ismael
  • Almazán, Fernando
  • Lafuente, María
  • Urbiztondo, Miguel A.
  • Dobrek, Martin
  • Bechelany, Mikhael
  • Julbe, Anne
  • Gandía Pascual, Luis
Acrylonitrile butadiene styrene (ABS) is one of the most extensively used polymer in 3D printing manufacturing due to its competitive thermal and mechanical properties. Recently, a special attention has been devoted to novel ABS composites featuring extra functionalities e.g. in the area of VOC removal. Herein, we report on a facile protocol for the functionalization of 3D printed ABS filters with a MOF (Metal- Organic Framework) material (ZIF-8) targeting the conception of attractive gas filters. The proposed synthesis strategy consists in low temperature ALD (Atomic Layer Deposition) of ZnO on the ABS grid followed by the hydrothermal conversion of ZnO to ZIF-8, both steps being conducted at 60 °C. In such way, the method enables an effective growth of ZIF-8 without altering the stability of the polymeric ABS support. The as-fabricated ABS/ZIF-8 filters offer a promising adsorption behaviour for dimethyl methylphosphonate (~20.4 mg of DMMP per gram of ZIF-8), thus proving their potential for toxic gas capture applications., Financial support from Gobierno de Navarra (grants PC052-23), from MINECO (grant CTQ2016-79419-R) and from the Spanish Ministerio de Ciencia, Innovación y Universidades and the European Regional Development Fund (ERDF/FEDER) (grant RTI2018-096294-B-C31) is gratefully acknowledged. I.P. thanks Obra Social la Caixa, Fundación Caja Navarra and UPNA for his research contracts in the framework of the programs 'Ayudas Postdoctorales' and 'CaptaciónTalento'. L. M. G. wishes to thank Banco de Santander and Universidad Pública de Navarra for their financial support under 'Programa de Intensificación de la Investigación 2018' initiative.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

In situ synthesis of SERS-active Au@POM nanostructures in a microfluidic device for real-time detection of water pollutants

  • Lafuente Adiego, Marta
  • Pellejero, Ismael
  • Clemente, Alberto
  • Urbiztondo, Miguel A.
  • Mallada, Reyes
  • Reinoso, Santiago
  • Pina, María del Pilar
  • Gandía Pascual, Luis
We present a simple, versatile and low-cost approach for the preparation of SERS-active regions within a microfluidic channel 50 cm in length. The approach involves the UV-light-driven formation of polyoxometalate-decorated gold nanostructures, Au@POM (POM: H3PW12O40 (PW) and H3PMo12O40 (PMo)), that self-assemble in situ on the surface of the PDMS microchannels without any extra functionalization procedure. The fabricated LoCs were characterized by SEM, UV-Vis, Raman, XRD and XPS techniques. The SERS activity of the resulting Au@POM–coated lab-on-a-chip (LoC) devices was evaluated in both static and flow conditions using Rhodamine R6G. The SERS response of Au@PW–based LoCs was found superior to Au@PMo counterparts and outstanding when compared to reported data on metal@POM nanocomposites. We demonstrate the potentialities of both Au@POM–coated LoCs as analytical platforms for real time detection of the organophosphorous pesticide Paraoxon-methyl at 10-6 M concentration level., Financial support from Gobierno de Navarra (grants PC025-026 and PC052-053) and MINECO (grant CTQ2016-79419-R) is gratefully acknowledged. I.P. and S.R. thank Obra Social la Caixa, Fundacion Caja Navarra, and UPNA for their research contracts in the framework of the programs 'Ayudas Postdoctorales' and 'Captacion del Talento'.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Highly sensitive SERS quantification of organophosphorous chemical warfare agents: a major step towards the real time sensing in the gas phase

  • Lafuente Adiego, Marta
  • Pellejero, Ismael
  • Sebastián, Víctor
  • Urbiztondo, Miguel A.
  • Mallada, Reyes
A surface-enhanced Raman scattering (SERS)-based sensor was developed for the label-free real-time gas phase detection of dimethyl methylphosphonate (DMMP); a surrogate molecule of the G-series nerve agents which are of particular concern due to its extreme toxicity, persistence and previous deployment. The SERS platform was designed using simple elements (Au nano-particles) coated with a citrate layer, and a self-assembly procedure that yields near- optimum distances among the nanoparticles. The citrate coating acts as an effective trap of the target molecules on the immediate vicinity of the Au nanoparticle surface under ambient conditions by reversible hydrogen bonding type interactions. For the first time, we have been able to detect sub-ppm concentrations of DMMP in gas phase (130 parts-per-billion), as might be found on potential emergency scenarios. The high sensitivity, simple preparation and reusability of the SERS platforms developed in this work open up the way for immediate detection of chemical warfare agents in realistic scenarios., Financial support from MICINN (CTQ2013-49068-C2-1-R; CTQ2016-79419-R) and CUD (UZCUD2016-TEC-07) is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas phase detection of chemical warfare agents CWAs with portable Raman

  • Lafuente, Marta
  • Sanz, Diego
  • Urbiztondo, Miguel
  • Ricote, J.
  • Pina, María Pilar
  • Mallada, Reyes
The development of SERS substrates for chemical detection of specific analytes requires appropriate selection of plasmonic metal and the surface where it is deposited. Here we deposited Ag nanoplates on three substrates: i) conventional SiO2/Si wafer, ii) stainless steel mesh and iii) graphite foils. The SERS enhancement of the signal was studied for Rhodamine 6 G (R6 G) as common liquid phase probe molecule. We conducted a comprehensive study with λ = 532, 633 and 785 nm on all the substrates. The best substrate was investigated, at the optimum laser 785 nm, for gas phase detection of dimethyl methyl phosphonate (DMMP), simulant of the G-series nerve agents, at a concentration of 2.5 ppmV (14 mg/m3). The spectral fingerprint was clearly observed; with variations on the relative intensities of SERS Raman bands compared to bulk DMMP in liquid phase reflects the DMMP-Ag interactions. These interactions were simulated by Density Functional Theory (DFT) calculations and the simulated spectra matched with the experimental one. Finally, we were detected the characteristics DMMP fingerprint with hand-held portable equipment. These results open the way for the application of SERS technique on real scenarios where robust, light-weight, miniaturized and simple to use and cost-effective tools are required by first responders., Authors are grateful for financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement Nr. 823895; MICINN, Spain (CTQ2013-49068-C2-1-R and CTQ2016-79419-R); Gobierno de Aragón (T57-17R p), Feder 2014-2020 “Construyendo Europa desde Aragón”) and CIBER-BBN (initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund), Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-driven direct synthesis of carbon nanodots and application as sensitizers for visible-light photocatalysis

  • Mas, Nuria
  • Hueso, José L.
  • Martínez, Gema
  • Madrid, Ainhoa
  • Mallada, Reyes
  • Ortega-Liébana, M. Carmen
  • Bueno-Alejo, Carlos
  • Santamaría, Jesús
We present the first successful synthesis of monodisperse carbon nanodots (CNDs) with tunable photoluminescence (PL) carried out by laser pyrolysis of two common volatile organic precursors such as toluene and pyridine. Remarkably, the initial chemical composition of the precursor determines the formation of undoped or N-doped CNDs and their corresponding absorption response in the visible range (expanded for the latter). We demonstrate the control and versatility of this synthesis method to tune the final outcome and its potential to explore a great number of potential solvent candidates. Furthermore, we have successfully exploited these CNDs (both undoped and N-doped) as effective sensitizers of TiO2 nanoparticles in the visible-light driven photo-degradation of a cationic dye selected as model organic pollutant., Financial support from the European Research Council (ERC Advanced Grant CADENCE number 742684) is gratefully acknowledged. We also acknowledge the support from NANOLIGHT (REA grant number 294094), CIBER-BBN and MINECO (Spain) with project CTQ2016-79419-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

LED-driven continuous flow carbon dioxide hydrogenation on a nickel-based catalyst

  • Bueno-Alejo, Carlos
  • Arca-Ramos, Adriana
  • Hueso, José L.
  • Santamaría, Jesús
Methane can be obtained from the direct hydrogenation of CO2 via the Sabatier reaction. This reaction is usually performed at high temperatures and/or pressures but it has been recently reported that in the presence of certain nanostructured catalysts, CO2 methanation can proceed at lower temperatures in solar photo-assisted processes. In this study, an inexpensive and commercially available nickel-based catalyst (Ni/Al2O3·SiO2) has been selected to perform the continuous CO2 hydrogenation in a fixed bed photocatalytic reactor using high-radiance/low consumption light emitting diodes (LEDs). These illumination conditions allowed us to attain the reaction temperatures required without the need of additional heating sources. Different LED excitation wavelengths and irradiances were evaluated. Under selected irradiation conditions (460 nm wavelength) not only the photothermal but also the photo-catalytic conversion of CO2 into CH4 takes place, with high selectivity. Conversion levels above 70% with production rates of ca. 35 mmol CH4 g−1 h-1 were obtained, outperforming the results obtained by conventional heating methods or with other irradiation wavelengths., Financial support from MINECO (Spain) (ARCADIA-CTQ2016-79419-R) and the CIBER-BBN (initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged. The synthesis of materials has been performed at the facilities of the NANOBIOSIS ICTS, managed by the Nanoparticle Synthesis Unit of the CIBER-BBN. The microscopy works have been conducted in the "Laboratorio de Microscopias Avanzadas" at "Instituto de Nanociencia de Aragon - Universidad de Zaragoza. Dr. Irusta is gratefully acknowledged for performing the XPS analysis. A.A.R. thanks the Spanish Government for a Juan de la Cierva postdoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Triangular and prism‐shaped gold‐zinc oxide plasmonic nanostructures: In situ reduction, assembly, and full‐range photocatalytic performance

  • Bottega‐Pergher, Bruno
  • Graus, Javier
  • Bueno-Alejo, Carlos
  • Hueso, José L.
Gold‐based nanocatalysts have been traditionally selected for multiple homogeneous and heterogeneous reactions of interest involving redox processes. Likewise, greener routes involving more efficient reactors and the use of inexpensive and nature‐mimicking excitation sources have boosted the research on photocatalysts that can drive these chemical reactions upon excitation with multiple wavelength sources beyond the UV range. In the present work we report on a multi‐step synthesis approach that enables the in situ generation of triangular and prism‐shaped gold nanostructures with a localized surface plasmon resonance effect and their direct assembly onto a ZnO nanostructured semiconductor support. Different LED excitation sources in the whole UV/Vis‐NIR range have been systematically selected to activate these hybrid materials in the selective reduction of p‐nitrophenol (4‐NP), a well‐known contaminant by‐product. While ZnO becomes preferentially active in the UV window, the anisotropic shape of these gold plasmonic nanostructures helps to broaden the photocatalytic response of ZnO towards the visible and NIR range, being especially active under 460 nm blue light irradiation and expanding their potential application in multiple solar‐driven catalytic processes of interest for decontamination and upgrading of toxic chemicals., The authors acknowledge the European Research Council for funding through an Advanced Grant research project (CADENCE grant number 742684). Financial support from MINECO (Spain) (ARCADIA‐CTQ2016‐79419‐R) and the CIBER‐BBN (initiative funded by the VI National R&D&i Plan 2008‐2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged. B. B. ‐P. acknowledges the University of Zaragoza and Fundacion Carolina for funding his MSc. studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-radiance LED-driven fluidized bed photoreactor for the complete oxidation of n-hexane in air

  • Bueno-Alejo, Carlos
  • Hueso, José L.
  • Mallada, Reyes
  • Julian, Ignacio
  • Santamaría, Jesús
This work presents a highly efficient photo-reactor configuration for VOC abatement. It consists of a fluidized bed made of commercial, easy to fluidize, transparent borosilicate glass beads coated with commercial TiO2 nanoparticles (0.15–2.3 wt% loadings). Herein, we demonstrate that the use of high-radiance/low consumption UV-LEDs as irradiation sources with a deeper light penetration under fluidizing conditions facilitates the photocatalytic response to achieve the complete oxidation of VOCs. The role of different parameters such as catalyst loading and irradiation power have been thoroughly studied and evaluated to maximize the full combustion of n-hexane. Under the high radiance (up to 2200 mW/cm2) conditions used the bed heats significantly (up to 190 °C), although this did not have an effect on the conversions reached, which depended solely on the wavelength and power used. The productivity of the photoreactor tested and the space velocity used were around 5.25 × 10−2 mol/g·h and 12000 h−1 respectively., Financial support from MINECO (Spain) with projects CTQ2016-77147-R and CTQ2016-79419-R and the CIBER-BBN is gratefully acknowledged. We also acknowledge the support from HECTOR project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic Au-ZnO photocatalyst for the visible-light expanded oxidation of n-hexane

  • Bueno-Alejo, Carlos
  • Graus, Javier
  • Arenal, Raúl
  • Lafuente, Marta
  • Bottega‐Pergher, Bruno
  • Hueso, José L.
In this work we present a novel metal-semiconductor heterostructure that contains triangular and prism-shaped plasmonic gold nanostructures directly synthesized and assembled onto ZnO nanostructures. Spatially-resolved (SR) high-resolution electron energy loss spectroscopy (EELS) at the local (sub-nanometer scale) level confirmed the field enhancement of the local electromagnetic fields in the surroundings of the triangular and prism-shaped Au nanostructures and in the interfacial junction between Au and ZnO. Different LED excitation sources have been systematically selected in the whole UV–vis-NIR range to evaluate the photocatalytic response of the Au-ZnO heterostructures towards the oxidation of n-hexane, selected as a model VOC present in indoor environments. The Au-ZnO exhibits visible expanded photo-response with the more energetic interband and intraband electrons and the higher LED irradiation wavelengths and it is able to outperform its ZnO plain counterpart., Financial support from the European Research Council (ERC Advanced Grant CADENCE number 742684) is gratefully acknowledged. We also acknowledge the support from CIBER-BBN and MINECO (Spain) with project CTQ2016-79419-R. R.A. acknowledges funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (project grant MAT2016-79776-P (AEI/FEDER, UE)) and from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Attomolar SERS detection of organophosphorous pesticides using silver mirror–like micro-pyramids as active substrate

  • Lafuente, Marta
  • Berenschot, Erwin J. W.
  • Tiggelaar, Roald M.
  • Rodrigo, Sergio G.
  • Mallada, Reyes
  • Tas, Niels R.
  • Pina, María Pilar
Surface-enhanced Raman spectroscopy (SERS) is gaining importance as an ultrasensitive analytical tool for routine high-throughput analysis of a variety of molecular compounds. One of the main challenges is the development of robust, reproducible and cost-effective SERS substrates. In this work, we study the SERS activity of 3D silver mirror–like micro-pyramid structures extended in the z-direction up to 3.7 μm (G0 type substrate) or 7.7 μm (G1 type substrate), prepared by Si-based microfabrication technologies, for trace detection of organophosphorous pesticides, using paraoxon-methyl as probe molecule. The average relative standard deviation (RSD) for the SERS intensity of the peak displayed at 1338 cm−1 recorded over a centimetre scale area of the substrate is below 13% for pesticide concentrations in the range 10−6 to 10−15 mol L−1. This data underlies the spatial uniformity of the SERS response provided by the microfabrication approach. According to finite-difference time-domain (FDTD) simulations, such remarkable feature is mainly due to the contribution on electromagnetic field enhancement of edge plasmon polaritons (EPPs), propagating along the pyramid edges where the pesticide molecules are preferentially adsorbed., The authors received financial support from MICINN (CTQ2013-49068-C2-1-R, CTQ2016-79419-R and MAT2017-88358-C3-2-R), Gobierno de Aragón (T57-17R p) and Feder 2014-2020 ‘Construyendo Europa desde Aragón’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled covalent functionalization of 2 H‐MoS2 with molecular or polymeric adlayers

  • Quirós‐Ovies, Ramiro
  • Vázquez Sulleiro, Manuel
  • Vera‐Hidalgo, Mariano
  • Prieto Serrano, Javier
  • Gómez, I. Jénnifer
  • Sebastián, Víctor
  • Ricote, J.
  • Pérez, Emilio M.
Special Issue: Chemical Functionalization of 2D Materials. This article also appears in: Chemical Functionalization of 2D Materials Society Volumes: Czech Republic., Most air‐stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS2, the semiconducting 2 H‐MoS2 is much less reactive than its metallic counterpart, 1T‐MoS2. As a consequence, there are hardly any reliable methods for the covalent modification of 2 H‐MoS2. An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H‐MoS2 with maleimides is presented. The use of a base (Et3N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS2. In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H‐MoS2 in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used., The European Research Council (ERC‐StG‐307609; ERC‐PoC‐ ERC‐AdG‐742684), MINECO (CTQ2017‐86060‐P and CTQ2016‐79419‐R) the Comunidad de Madrid (MAD2D‐CM S2013/ MIT‐3007) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV‐ 2016‐0686). Part of the work was carried out with the support of CEITEC Nano Research Infrastructure (ID LM2015041, MEYS CR, 2016–2019), CEITEC Brno University of Technology., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lamellar nanoporous gold thin films with tunable porosity for ultrasensitive SERS detection in liquid and gas phase

  • Chauvin, Adrien
  • Lafuente, Marta
  • Mevellec, Jean Yves
  • Mallada, Reyes
  • Humbert, Bernard
  • Pina, María Pilar
  • Tessier, Pierre-Yves
  • El Mel, Abdelaziz
Lamellar nanoporous gold thin films, constituted of a stack of very thin layers of porous gold, are synthesized by chemical etching from a stack of successively deposited nanolayers of copper and gold. The gold ligament size, the pore size and the distance between lamellas are tunable in the few tens nanometer range by controlling the initial thickness of the layers and the etching time. The SERS activity of these lamellar porous gold films is characterized by their SERS responses after adsorption of probe bipyridine and naphtalenethiol molecules. The SERS signal is investigated as a function of the bipyridine concentration from 10−14 mol L−1 to 10−3 mol L−1. The higher SERS response corresponds to an experimental detection limit down to 10−12 mol L−1. These performance is mainly attributed to the specific nanoporous gold architecture and the larger accessible surface to volume ratio. The lamellar nanoporous gold substrate is explored for sensitive SERS detection of dimethyl methylphosphonate (DMMP), a surrogate molecule of the highly toxic G-series nerve agents. The resultant nanostructure facilitates the diffusion of target molecules through the nanopores and their localization at the enhancing metallic surface leading to the unequivocal Raman signature of DMMP at a concentration of 5 parts per million., A. Chauvin acknowledges financial support from the project “Nanomaterials centre for advanced applications”, Project No. CZ.02.1.01/0.0/0.0/15_003/0000485, financed by ERDF. M. Lafuente, R. Mallada and M. P. Pina are grateful for financial support from MICINN (CTQ2013-49068-C2-1-R, CTQ2016-79419-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards the reproducible fabrication of homogeneous SERS substrates by Langmuir-Schaefer technique: A low cost and scalable approach for practical SERS based sensing applications

  • Lafuente, Marta
  • Ruiz Rincón, Silvia
  • Mallada, Reyes
  • Cea, Pilar
  • Pina, María Pilar
The development of homogeneous, endurable and low cost SERS (Surface Enhancement Raman Spectroscopy) substrates is becoming of outmost importance due to growing interest in SERS technique for analytical applications. Here, we use the Langmuir-Schaefer technique to produce, as demonstrated by Atomic Force Microscopy and Scanning Electron Microscopy, homogeneous tightly-packed films of 27 nm in diameter octadecylthiolate capped gold nanoparticles in a reproducible and simple manner. The fabricated Au-based SERS substrates result in an analytical enhancement factor (AEF) of 4.3 × 108 and enable the detection of Rhodamine 6G in a 10−11 M aqueous solution, with remarkable spatial uniformity of the SERS response over a scanned area of 0.4 cm2. In addition, the developed procedure is highly reproducible from batch to batch with a standard deviation below 10% in the SERS signal. Finally, these substrates exhibit durable SERS properties, i.e. experimentally validated 16 months after its fabrication., P.C. and S.R-R. are grateful for financial assistance from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) research group. M.P.P., R.M. and M.L. are grateful for financial support from MICINN (CTQ2013-49068-C2-1-R and CTQ2016-79419-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic MOF thin films with raman internal standard for fast and ultrasensitive SERS detection of chemical warfare agents in ambient air

  • Lafuente, Marta
  • De Marchi, Sarah
  • Urbiztondo, Miguel A.
  • Pastoriza-Santos, Isabel
  • Pérez-Juste, Ignacio
  • Santamaría, Jesús
  • Mallada, Reyes
  • Pina, María Pilar
Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic technique for selective detection and quantification of molecules at extremely low concentrations. However, practical SERS applications for gaseous chemicals with small cross section is still in its early stages. We herein report a plasmonic-sorbent thin-film platform with integrated Raman internal standard with outstanding SERS sensing capabilities for chemical warfare agents (CWA) simulants. The thin film is constituted of close-packed core–shell Au@Ag nanorods individually encapsulated within a ZIF-8 framework (Au@Ag@ZIF-8). While the Au@Ag nanoparticles amplify the Raman signal of molecules located near their surface, the ZIF-8 framework plays a key role in the trapping of the dimethyl methylphosphonate (DMMP) or 2-chloroethyl ethyl sulfide (CEES) from the gas phase as well as Raman internal standard. The underlying adsorption mechanism of the molecules within the ZIF-8 framework as well as the interaction between DMMP and Ag surface are investigated by computational simulations. Outstanding SERS sensing capabilities of Au@Ag@ZIF-8 thin films, in terms of response time, quantification limit, reproducibility, and recyclability, are demonstrated for dimethyl methylphosphonate (DMMP) and 2-chloroethyl ethyl sulfide (CEES), selected as CWA simulants of sarin gas and mustard gas, respectively. A limit of detection (LOD) of 0.2 ppbV is reported for DMMP. Additionally, experiments performed with portable Raman equipment detect 2.5 ppmV for DMMP in ambient air and 76 ppbV for CEES in N2, with response times of 21 and 54 s, respectively. This proof of concept opens the door for handheld SERS-based gas sensing at ultralow concentrations in practical applications, such as homeland security, critical infrastructure protection, chemical process monitoring, or personalized medicine., The authors are grateful for financial support from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 883390 (H2020-SU-SECU-2019 SERSing Project), Spanish State Research Agency (CTQ2016-79419-R, MAT2016-77809-R, PID2019-108660RB-I00 and PID2019-108954RB-I00), Gobierno de Aragón (T57-17R p, Feder 2014-2020 “Construyendo Europa desde Aragón”), Xunta de Galicia (GRC ED431C 2016-048, FEDER 1014-2020), and CIBER-BNN (initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of devices featuring covalently linked MoS2–graphene heterostructures

  • Vázquez Sulleiro, Manuel
  • Develioglu, Aysegul
  • Quirós‐Ovies, Ramiro
  • Martín-Pérez, Lucía
  • Martín Sabanés, Natalia
  • Gonzalez-Juarez, Maria Lourdes
  • Gómez, I. Jénnifer
  • Vera‐Hidalgo, Mariano
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Burzurí, Enrique
  • Pérez, Emilio M.
The most widespread method for the synthesis of 2D–2D heterostructures is the direct growth of one material on top of the other. Alternatively, flakes of different materials can be manually stacked on top of each other. Both methods typically involve stacking 2D layers through van der Waals forces—such that these materials are often referred to as van der Waals heterostructures—and are stacked one crystal or one device at a time. Here we describe the covalent grafting of 2H-MoS2 flakes onto graphene monolayers embedded in field-effect transistors. A bifunctional molecule featuring a maleimide and a diazonium functional group was used, known to connect to sulfide- and carbon-based materials, respectively. MoS2 flakes were exfoliated, functionalized by reaction with the maleimide moieties and then anchored to graphene by the diazonium groups. This approach enabled the simultaneous functionalization of several devices. The electronic properties of the resulting heterostructure are shown to be dominated by the MoS2–graphene interface., The authors acknowledge European Research Council (ERC-PoC- 842606 (E.M.P.); ERC-AdG-742684 (J. S.) and the MSCA program MSCA-IF-2019-892667 (N.M.S.), MINECO (CTQ2017-86060-P (E.M.P.) and CTQ2016-79419-R), Ministerio de Ciencia e Innovación (RTI2018-096075-A-C22 (E.B.), RYC2019-028429-I (E.B.)) the Comunidad de Madrid (MAD2D-CM S2013/ MIT-3007 (E.M.P.), Y2018/NMT-4783 (A.D.)) and the Programa de Atracción del Talento Investigador 2017-T1/IND-5562 (E.B.)). CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, grant no. SEV-2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Covalent cross-linking of 2H-MoS nanosheets

  • Vázquez Sulleiro, Manuel
  • Quirós‐Ovies, Ramiro
  • Vera‐Hidalgo, Mariano
  • Gómez, I. Jénnifer
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Pérez, Emilio M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials., The European Research Council (ERC-StG-307609; ERC-PoC-842606; ERC-AdG-742684), MINECO (CTQ2017-86060-P and CTQ2016-79419-R) the Comunidad de Madrid (MAD2D-CM S2013/ MIT-3007), CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV- 2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cu-BTC functional microdevices as smart tools for capture and preconcentration of nerve agents

  • Almazán, Fernando
  • Urbiztondo, Miguel A.
  • Serra-Crespo, Pablo
  • Seoane, Beatriz
  • Gascón, Jorge
  • Santamaría, Jesús
  • Pina, María Pilar
Cu-based metal–organic framework (MOF) microdevices are applied in sampling and preconcentration of nerve agents (NAs) diluted in gaseous streams. An in situ electrochemical-assisted synthesis of a Cu-benzene-1,3,5-tricarboxylate (BTC) thick film is carried out to functionalize a Cu-modified glass substrate. This simple, rapid, reproducible, and easy-to-integrate MOF synthesis approach enables the microfabrication of functional micro-preconcentrators with a large Brunauer–Emmett–Teller (BET) surface area (above 2000 cm2) and an active pore volume (above 90 nL) for the efficient adsorption of nerve agent molecules along the microfluidic channel 2.5 cm in length. The equilibrium adsorption capacity of the bulk material has been characterized through thermogravimetric analysis after exposure to controlled atmospheres of a sarin gas surrogate, dimethyl methylphosphonate (DMMP), in both dry and humid conditions (30% RH at 293 K). Breakthrough tests at the ppm level (162 mg/m3) reveal equilibrium adsorption capacities up to 691 mg/g. The preconcentration performance of such μ-devices when dealing with highly diluted surrogate atmosphere, i.e., 520 ppbV (2.6 mg/m3) at 298 K, leads to preconcentration coefficients up to 171 for sample volume up to 600 STP cm3. We demonstrate the potentialities of Cu-BTC micro-preconcentrators as smart first responder tools for “on-field” detection of nerve agents in the gas phase at relevant conditions., The authors are grateful for financial support MICINN (CTQ2013-49068-C2-1-R AEI/FEDER, UE, CTQ2016-79419-R AEI/FEDER, UE), H2020 (MSCA-RISE-GA 823895), and Gobierno de Aragón (T57-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalization of 3D printed ABS filters with MOF for toxic gas removal

  • Pellejero, Ismael
  • Almazán, Fernando
  • Lafuente, Marta
  • Urbiztondo, Miguel A.
  • Drobek, Martin
  • Bechelany, Mikhael
  • Julbe, Anne
  • Gandía, Luis M.
Acrylonitrile butadiene styrene (ABS) is one of the most extensively used polymer in 3D printing manufacturing due to its competitive thermal and mechanical properties. Recently, a special attention has been devoted to novel ABS composites featuring extra functionalities e.g. in the area of VOC removal. Herein, we report on a facile protocol for the functionalization of 3D printed ABS filters with a MOF (Metal-Organic Framework) material (ZIF-8) targeting the conception of attractive gas filters. The proposed synthesis strategy consists in low temperature ALD (Atomic Layer Deposition) of ZnO on the ABS grid followed by the hydrothermal conversion of ZnO to ZIF-8, both steps being conducted at 60 °C. In such way, the method enables an effective growth of ZIF-8 without altering the stability of the polymeric ABS support. The as-fabricated ABS/ZIF-8 filters offer a promising adsorption behaviour for dimethyl methylphosphonate (∼20.4 mg of DMMP per gram of ZIF-8), thus proving their potential for toxic gas capture applications., Financial support from Gobierno de Navarra (grants PC052-23), from MINECO (grant CTQ2016-79419-R) and from the Spanish Ministerio de Ciencia, Innovación y Universidades and the European Regional Development Fund (ERDF/FEDER) (grant RTI2018-096294-B-C31) is gratefully acknowledged. I. P. thanks Obra Social la Caixa, Fundación Caja Navarra and UPNA for his research contracts in the framework of the programs “Ayudas Postdoctorales” and “Captación Talento”. L. M. G. wishes to thank Banco de Santander and Universidad Pública de Navarra for their financial support under “Programa de Intensificación de la Investigación 2018” initiative., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly sensitive SERS quantification of organophosphorous chemical warfare agents: A major step towards the real time sensing in the gas phase

  • Lafuente, Marta
  • Pellejero, Ismael
  • Sebastián, Víctor
  • Urbiztondo, Miguel A.
  • Mallada, Reyes
  • Pina, María Pilar
  • Santamaría, Jesús
A surface-enhanced Raman scattering (SERS)-based sensor was developed for the label-free real-time gas phase detection of dimethyl methylphosphonate (DMMP); a surrogate molecule of the G-series nerve agents which are of particular concern due to its extreme toxicity, persistence and previous deployment. The SERS platform was designed using simple elements (Au nano-particles) coated with a citrate layer, and a self-assembly procedure that yields near- optimum distances among the nanoparticles. The citrate coating acts as an effective trap of the target molecules on the immediate vicinity of the Au nanoparticle surface under ambient conditions by reversible hydrogen bonding type interactions. For the first time, we have been able to detect sub-ppm concentrations of DMMP in gas phase (130 parts-per-billion), as might be found on potential emergency scenarios. The high sensitivity, simple preparation and reusability of the SERS platforms developed in this work open up the way for immediate detection of chemical warfare agents in realistic scenarios., Financial support from financial support from MICINN (CTQ2013-49068-C2-1-R; CTQ2016-79419-R) and CUD (UZCUD2016-TEC-07) is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ synthesis of SERS-active Au@POM nanostructures in a microfluidic device for real-time detection of water pollutants

  • Lafuente, Marta
  • Pellejero, Ismael
  • Clemente, Alberto
  • Urbiztondo, Miguel A.
  • Mallada, Reyes
  • Reinoso, Santiago
  • Pina, María Pilar
  • Gandía, Luis M.
We present a simple, versatile, and low-cost approach for the preparation of surface-enhanced Raman spectroscopy (SERS)-active regions within a microfluidic channel 50 cm in length. The approach involves the UV-light-driven formation of polyoxometalate-decorated gold nanostructures, Au@POM (POM: H3PW12O40 (PW) and H3PMo12O40 (PMo)), that self-assemble in situ on the surface of the polydimethylsiloxane (PDMS) microchannels without any extra functionalization procedure. The fabricated LoCs were characterized by scanning electron microscopy (SEM), UV–vis, Raman, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The SERS activity of the resulting Au@POM-coated lab-on-a-chip (LoC) devices was evaluated in both static and flow conditions using rhodamine R6G. The SERS response of Au@PW-based LoCs was found to be superior to Au@PMo counterparts and outstanding when compared to reported data on metal@POM nanocomposites. We demonstrate the potentialities of both Au@POM-coated LoCs as analytical platforms for real-time detection of the organophosphorous pesticide paraoxon-methyl at 10–6 M concentration level, Financial support from Gobierno de Navarra (grants PC025-026 and PC052-053) and MINECO (grant CTQ2016-79419-R) is gratefully acknowledged. I.P. and S.R. thank Obra Social la Caixa, Fundación Caja Navarra, and UPNA for their research contracts in the framework of the programs “Ayudas Postdoctorales” and “Captación del Talento”. The microscopy images have been recorded in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3D fractals as SERS active platforms: Preparation and evaluation for gas phase detection of G-nerve agents

  • Lafuente, M.
  • Berenschot, E.J.W.
  • Tiggelaar, R.M.
  • Mallada, R.
  • Tas, N.R.
  • Pina, M.P.
One of the main limitations of the technique surface-enhanced Raman scattering (SERS) for chemical detection relies on the homogeneity, reproducibility and reusability of the substrates. In this work, SERS active platforms based on 3D-fractal microstructures is developed by combining corner lithography and anisotropic wet etching of silicon, to extend the SERS-active area into 3D, with electrostatically driven Au@citrate nanoparticles (NPs) assembly, to ensure homogeneous coating of SERS active NPs over the entire microstructured platforms. Strong SERS intensities are achieved using 3D-fractal structures compared to 2D-planar structures; leading to SERS enhancement factors for R6G superior than those merely predicted by the enlarged area effect. The SERS performance of Au monolayer-over-mirror configuration is demonstrated for the label-free real-time gas phase detection of 1.2 ppmV of dimethyl methylphosphonate (DMMP), a common surrogate of G-nerve agents. Thanks to the hot spot accumulation on the corners and tips of the 3D-fractal microstructures, the main vibrational modes of DMMP are clearly identified underlying the spectral selectivity of the SERS technique. The Raman acquisition conditions for SERS detection in gas phase have to be carefully chosen to avoid photo-thermal effects on the irradiated area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly sensitive SERS quantification of organophosphorous chemical warfare agents: A major step towards the real time sensing in the gas phase

  • Lafuente, M.
  • Pellejero, I.
  • Sebastián, V.
  • Urbiztondo, M.A.
  • Mallada, R.
  • Pina, M.P.
  • Santamaría, J.
A surface-enhanced Raman scattering (SERS)-based sensor was developed for the label-free real-time gas phase detection of dimethyl methylphosphonate (DMMP); a surrogate molecule of the G-series nerve agents which are of particular concern due to its extreme toxicity, persistence and previous deployment. The SERS platform was designed using simple elements (Au nano-particles) coated with a citrate layer, and a self-assembly procedure that yields near- optimum distances among the nanoparticles. The citrate coating acts as an effective trap of the target molecules on the immediate vicinity of the Au nanoparticle surface under ambient conditions by reversible hydrogen bonding type interactions. For the first time, we have been able to detect sub-ppm concentrations of DMMP in gas phase (130 parts-per-billion), as might be found on potential emergency scenarios. The high sensitivity, simple preparation and reusability of the SERS platforms developed in this work open up the way for immediate detection of chemical warfare agents in realistic scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High-radiance LED-driven fluidized bed photoreactor for the complete oxidation of n-hexane in air

  • Bueno-Alejo, C.J.
  • Hueso, J.L.
  • Mallada, R.
  • Julian, I.
  • Santamaria, J.
This work presents a highly efficient photo-reactor configuration for VOC abatement. It consists of a fluidized bed made of commercial, easy to fluidize, transparent borosilicate glass beads coated with commercial TiO2 nanoparticles (0.15–2.3 wt% loadings). Herein, we demonstrate that the use of high-radiance/low consumption UV-LEDs as irradiation sources with a deeper light penetration under fluidizing conditions facilitates the photocatalytic response to achieve the complete oxidation of VOCs. The role of different parameters such as catalyst loading and irradiation power have been thoroughly studied and evaluated to maximize the full combustion of n-hexane. Under the high radiance (up to 2200 mW/cm2) conditions used the bed heats significantly (up to 190 °C), although this did not have an effect on the conversions reached, which depended solely on the wavelength and power used. The productivity of the photoreactor tested and the space velocity used were around 5.25 × 10-2 mol/g·h and 12000 h-1 respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Triangular and prism-shaped gold-zinc oxide plasmonic nanostructures: in situ reduction, assembly and full-range photocatalytic performance

  • Bottega-Pergher, B
  • Graus, J.
  • Bueno-Alejo, C.B.
  • Hueso, Jose L.
Gold-based nanocatalysts have been traditionally selected for multiple homogeneous and heterogeneous reactions of interest involving redox processes. Likewise, greener routes involving more efficient reactors and the use of inexpensive and nature-mimicking excitation sources have boosted the research on photocatalysts able to drive these chemical reactions upon excitation with multiple wavelength sources beyond the UV range. In the present work we report on a multi-step synthesis approach that implies the in situ generation of triangular and prism-shaped gold nanostructures with a localized surface plasmon resonance effect and their direct assembly onto a ZnO nanostructured semiconductor support. Different LED excitation sources in the whole UV-Vis-NIR range have been systematically selected to activate these hybrid materials in the selective reduction of p-nitrophenol (4-NP), a wellknown contaminant by-product. While ZnO becomes preferentially active in the UV window, the anisotropic shape of these gold plasmonic nanostructures helps to broaden the photocatalytic response of ZnO towards the visible and NIR range, being especially active under 460 nm blue light irradiation and expanding their potential application in multiple solar-driven catalytic processes of interest for decontamination and upgrading of toxic chemicals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Anisotropic Au-ZnO photocatalyst for the visible-light expanded oxidation of n-hexane

  • Bueno-Alejo, C.J.
  • Graus, J.
  • Arenal, R.
  • Lafuente, M.
  • Bottega-Pergher, B.
  • Hueso, J.L.
In this work we present a novel metal-semiconductor heterostructure that contains triangular and prism-shaped plasmonic gold nanostructures directly synthesized and assembled onto ZnO nanostructures. Spatially-resolved (SR) high-resolution electron energy loss spectroscopy (EELS) at the local (sub-nanometer scale) level confirmed the field enhancement of the local electromagnetic fields in the surroundings of the triangular and prism-shaped Au nanostructures and in the interfacial junction between Au and ZnO. Different LED excitation sources have been systematically selected in the whole UV–vis-NIR range to evaluate the photocatalytic response of the Au-ZnO heterostructures towards the oxidation of n-hexane, selected as a model VOC present in indoor environments. The Au-ZnO exhibits visible expanded photo-response with the more energetic interband and intraband electrons and the higher LED irradiation wavelengths and it is able to outperform its ZnO plain counterpart.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-driven direct synthesis of carbon nanodots and application as sensitizers for visible-light photocatalysis

  • Mas, Nuria
  • Hueso, José L.
  • Martínez, Gema
  • Madrid, Ainhoa
  • Mallada, Reyes
  • Ortega-Liébana, M. Carmen
  • Bueno-Alejo, Carlos
  • Santamaría, Jesús
We present the first successful synthesis of monodisperse carbon nanodots (CNDs) with tunable photoluminescence (PL) carried out by laser pyrolysis of two common volatile organic precursors such as toluene and pyridine. Remarkably, the initial chemical composition of the precursor determines the formation of undoped or N-doped CNDs and their corresponding absorption response in the visible range (expanded for the latter). We demonstrate the control and versatility of this synthesis method to tune the final outcome and its potential to explore a great number of potential solvent candidates. Furthermore, we have successfully exploited these CNDs (both undoped and N-doped) as effective sensitizers of TiO2 nanoparticles in the visible-light driven photo-degradation of a cationic dye selected as model organic pollutant.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas phase detection of chemical warfare agents CWAs with portable Raman

  • Lafuente, Marta
  • Sanz, Diego
  • Urbiztondo, Miguel
  • Santamaría, Jesús
  • Pina, María Pilar
  • Mallada, Reyes
The development of SERS substrates for chemical detection of specific analytes requires appropriate selection of plasmonic metal and the surface where it is deposited. Here we deposited Ag nanoplates on three substrates: i) conventional SiO2/Si wafer, ii) stainless steel mesh and iii) graphite foils. The SERS enhancement of the signal was studied for Rhodamine 6 G (R6 G) as common liquid phase probe molecule. We conducted a comprehensive study with ¿ = 532, 633 and 785 nm on all the substrates. The best substrate was investigated, at the optimum laser 785 nm, for gas phase detection of dimethyl methyl phosphonate (DMMP), simulant of the G-series nerve agents, at a concentration of 2.5 ppmV (14 mg/m3). The spectral fingerprint was clearly observed; with variations on the relative intensities of SERS Raman bands compared to bulk DMMP in liquid phase reflects the DMMP-Ag interactions. These interactions were simulated by Density Functional Theory (DFT) calculations and the simulated spectra matched with the experimental one. Finally, we were detected the characteristics DMMP fingerprint with hand-held portable equipment. These results open the way for the application of SERS technique on real scenarios where robust, light-weight, miniaturized and simple to use and cost-effective tools are required by first responders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Controlled Covalent Functionalization of 2 H-MoS2 with Molecular or Polymeric Adlayers

  • Quirós-Ovies, R.
  • Vázquez Sulleiro, M.
  • Vera-Hidalgo, M.
  • Prieto, J.
  • Gómez, I.J.
  • Sebastián, V.
  • Santamaría, J.
  • Pérez, E.M.
Most air-stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS2, the semiconducting 2 H-MoS2 is much less reactive than its metallic counterpart, 1T-MoS2. As a consequence, there are hardly any reliable methods for the covalent modification of 2 H-MoS2. An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H-MoS2 with maleimides is presented. The use of a base (Et3N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS2. In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H-MoS2 in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cu-BTC Functional Microdevices as Smart Tools for Capture and Preconcentration of Nerve Agents

  • Almazán, F.
  • Urbiztondo, M.A.
  • Serra-Crespo, P.
  • Seoane, B.
  • Gascon, J.
  • Santamaría, J.
  • Pina, M.P.
Cu-based metal-organic framework (MOF) microdevices are applied in sampling and preconcentration of nerve agents (NAs) diluted in gaseous streams. An in situ electrochemical-assisted synthesis of a Cu-benzene-1, 3, 5-tricarboxylate (BTC) thick film is carried out to functionalize a Cu-modified glass substrate. This simple, rapid, reproducible, and easy-to-integrate MOF synthesis approach enables the microfabrication of functional micro-preconcentrators with a large Brunauer-Emmett-Teller (BET) surface area (above 2000 cm2) and an active pore volume (above 90 nL) for the efficient adsorption of nerve agent molecules along the microfluidic channel 2.5 cm in length. The equilibrium adsorption capacity of the bulk material has been characterized through thermogravimetric analysis after exposure to controlled atmospheres of a sarin gas surrogate, dimethyl methylphosphonate (DMMP), in both dry and humid conditions (30% RH at 293 K). Breakthrough tests at the ppm level (162 mg/m3) reveal equilibrium adsorption capacities up to 691 mg/g. The preconcentration performance of such µ-devices when dealing with highly diluted surrogate atmosphere, i.e., 520 ppbV (2.6 mg/m3) at 298 K, leads to preconcentration coefficients up to 171 for sample volume up to 600 STP cm3. We demonstrate the potentialities of Cu-BTC micro-preconcentrators as smart first responder tools for "on-field" detection of nerve agents in the gas phase at relevant conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In Situ Synthesis of SERS-Active Au@POM Nanostructures in a Microfluidic Device for Real-Time Detection of Water Pollutants

  • Lafuente, M.
  • Pellejero, I.
  • Clemente, A.
  • Urbiztondo, M.A.
  • Mallada, R.
  • Reinoso, S.
  • Pina, M.P.
  • Gandía, L.M.
We present a simple, versatile, and low-cost approach for the preparation of surface-enhanced Raman spectroscopy (SERS)-active regions within a microfluidic channel 50 cm in length. The approach involves the UV-light-driven formation of polyoxometalate-decorated gold nanostructures, Au@POM (POM: H3PW12O40 (PW) and H3PMo12O40 (PMo)), that self-assemble in situ on the surface of the polydimethylsiloxane (PDMS) microchannels without any extra functionalization procedure. The fabricated LoCs were characterized by scanning electron microscopy (SEM), UV-vis, Raman, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The SERS activity of the resulting Au@POM-coated lab-on-a-chip (LoC) devices was evaluated in both static and flow conditions using rhodamine R6G. The SERS response of Au@PW-based LoCs was found to be superior to Au@PMo counterparts and outstanding when compared to reported data on metal@POM nanocomposites. We demonstrate the potentialities of both Au@POM-coated LoCs as analytical platforms for real-time detection of the organophosphorous pesticide paraoxon-methyl at 10-6 M concentration level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Covalent Cross-Linking of 2H-MoS2 Nanosheets

  • Vázquez Sulleiro, M.
  • Quirós-Ovies, R.
  • Vera-Hidalgo, M.
  • Gómez, I.J.
  • Sebastián, V.
  • Santamaría, J.
  • Pérez, E.M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Plasmonic MOF thin films with raman standard for fast and ultrasensitive SERS detection of chemical warfare agents in ambient air

  • Lafuente, Marta
  • De Marchi, Sarah
  • Urbiztondo, Miguel
  • Pastoriza-Santos, Isabel
  • Perez-Juste, Ignacio
  • Santamaria, Jesús
  • Mallada, Reyes
  • Pina, María
Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic technique for selective detection and quantification of molecules at extremely low concentrations. However, practical SERS applications for gaseous chemicals with small cross section is still in its early stages. We herein report a plasmonic-sorbent thin-film platform with integrated Raman internal standard with outstanding SERS sensing capabilities for chemical warfare agents (CWA) simulants. The thin film is constituted of close-packed core–shell Au@Ag nanorods individually encapsulated within a ZIF-8 framework (Au@Ag@ZIF-8). While the Au@Ag nanoparticles amplify the Raman signal of molecules located near their surface, the ZIF-8 framework plays a key role in the trapping of the dimethyl methylphosphonate (DMMP) or 2-chloroethyl ethyl sulfide (CEES) from the gas phase as well as Raman internal standard. The underlying adsorption mechanism of the molecules within the ZIF-8 framework as well as the interaction between DMMP and Ag surface are investigated by computational simulations. Outstanding SERS sensing capabilities of Au@Ag@ZIF-8 thin films, in terms of response time, quantification limit, reproducibility, and recyclability, are demonstrated for dimethyl methylphosphonate (DMMP) and 2-chloroethyl ethyl sulfide (CEES), selected as CWA simulants of sarin gas and mustard gas, respectively. A limit of detection (LOD) of 0.2 ppbV is reported for DMMP. Additionally, experiments performed with portable Raman equipment detect 2.5 ppmV for DMMP in ambient air and 76 ppbV for CEES in N2, with response times of 21 and 54 s, respectively. This proof of concept opens the door for handheld SERS-based gas sensing at ultralow concentrations in practical applications, such as homeland security, critical infrastructure protection, chemical process monitoring, or personalized medicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

LED-driven continuous flow carbon dioxide hydrogenation on a nickel-based catalyst

  • Bueno-Alejo, Carlos J.
  • Arca-Ramos, Adriana
  • Hueso, José L
  • Santamaria, Jesús
Methane can be obtained from the direct hydrogenation of CO2 via the Sabatier reaction. This reaction is usually performed at high temperatures and/or pressures but it has been recently reported that in the presence of certain nanostructured catalysts, CO2 methanation can proceed at lower temperatures in solar photo-assisted processes. In this study, an inexpensive and commercially available nickel-based catalyst (Ni/Al2O3·SiO2) has been selected to perform the continuous CO2 hydrogenation in a fixed bed photocatalytic reactor using high-radiance/low consumption light emitting diodes (LEDs). These illumination conditions allowed us to attain the reaction temperatures required without the need of additional heating sources. Different LED excitation wavelengths and irradiances were evaluated. Under selected irradiation conditions (460 nm wavelength) not only the photothermal but also the photo-catalytic conversion of CO2 into CH4 takes place, with high selectivity. Conversion levels above 70% with production rates of ca. 35 mmol CH4 g−1 h-1 were obtained, outperforming the results obtained by conventional heating methods or with other irradiation wavelengths.