Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot polyol synthesis of highly monodisperse short green silver nanorods

  • Patarroyo, Javier
  • Genç, Aziz
  • Arbiol, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
Green silver nanorods (Ag NRs) of a low aspect ratio (2.8) have been produced in high yields via an optimized, simple, and robust one-pot polyol method in the presence of tannic acid, which favors the nucleation of decahedral seeds needed for the production of monodisperse Ag NRs. These Ag NRs were further used as sacrificial templates to produce Au hollow nanostructures via galvanic replacement reaction with HAuCl at room temperature., We acknowledge financial support from MICINN (MAT2012-33330, MAT2015-70725-R) and AGAUR (2014-SGR-612) and FutureNanoNeeds (FP7-NMP-2013-LARGE-7). N. G. B. acknowledges financial support from the Ramon y Cajal program (RYC-2012-10991) and the Marie Curie Career Integration Grant (322153-MINE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying the sensitivity of multipolar (dipolar, quadrupolar, and octapolar) surface plasmon resonances in silver nanoparticles: the effect of size, composition, and surface coating

  • Bastús, Neus G.
  • Piella, Jordi
  • Puntes, Víctor F.
The effect of composition, size, and surface coating on the sensitivity of localized multipolar surface plasmon resonances has been spectroscopically investigated in high-quality silver colloidal solutions with precisely controlled sizes from 10 to 220 nm and well-defined surface chemistry. Surface plasmon resonance modes have been intensively characterized, identifying the size-dependence of dipolar, quadrupolar, and octapolar modes. Modifications of the NP's surface chemistry revealed the higher sensitivity of large sizes, long molecules, thiol groups, and low-order resonance modes. We also extend this study to gold nanoparticles, aiming to compare the sensitivity of both materials, quantifying the higher sensitivity of silver., We acknowledge financial support from the Spanish Ministerio de Ciencia e Innovacion (MICINN) (MAT2012-33330) and from the Catalan Agencia de Gestio d’Ajuts Universitaris i de Recerca (AGAUR) (2014-SGR-612). Financial support from the QNano (INFRA-2010-262163) and FutureNanoNeeds (FP7-NMP-2013-LARGE-7) Projects financed by the European Community under the FP7 Capacities Programme are gratefully acknowledged. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC2012-10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shell or dots - precursor controlled morphology of Au-Se deposits on CdSe nanoparticles

  • Cueva, Leonor de la
  • Meyns, Michaela
  • Bastús, Neus G.
  • Rodríguez-Fernández, Jonathan
  • Otero, Roberto
  • Gallego, José M.
  • Alonso, Concepción
  • Klinke, Christian
  • Juárez, Beatriz H.
The most prevalent image of the morphology of Au-CdSe hybrid nanoparticles (HNPs) is that of dumbbells or matchsticks with CdSe nanoparticles (NPs) acting as seed material onto which spherical Au dots are deposited. On the basis of a system with only three reaction components, CdSe seeds, n-dodecyltrimethylammonium bromide-complexed AuCl, and dodecanethiol, we demonstrate how the morphology of the Au deposits on the semiconductor NPs, either in the form of dots on the vertices or in the form of a shell around the NP surface, can be determined by controlling the oxidation state of the metal precursor. Furthermore, we apply X-ray photoelectron spectroscopy to show that the resultant deposits are composed of partially oxidized Au, corresponding to a Au-Se compound regardless the deposit morphology. To obtain a detailed characterization of the HNPs with different morphologies and to gain mechanistic insights into the deposition process, (cryogenic) high-resolution transmission electron microscopy, mass spectrometry, cyclic voltammetry, and computational simulations have been performed. Our results emphasize that the knowledge of the surface chemistry of the seed particles as well as a defined picture of the metal precursors is necessary to understand heterodeposition processes., C.K. and M.M. acknowledge the European Union for the ERC Starting Grant 2D-SYNETRA (304980, Seventh Framework Program FP7) and the Deutsche Forschungsgemeinschaft for granting the project KL 1453/9-1. B.H.J. is thankful for funding in the frame of the following projects: S2013/MIT2740 from Comunidad de Madrid and FIS2012-33011 and MAT2013-47395-C4-3-R and FIS2015-67367-C2-1-P from the Spanish Ministry of Economy and Competitiveness. R.O. is thankful for FIS2012-33011. Furthermore, the authors thank the Helmholtz Zentrum Berlin to have benn granted access to the BESSY-II facility, in particular the SurICat UHV XPS station. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Size-controlled synthesis of sub-10-nanometer citrate-stabilized gold nanoparticles and related optical properties

  • Piella, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
Highly monodisperse, biocompatible and functionalizable sub-10-nm citrate-stabilized gold nanoparticles (Au NPs) have been synthesized following a kinetically controlled seeded-growth strategy. The use of traces of tannic acid together with an excess of sodium citrate during nucleation is fundamental in the formation of a high number (7 × 1013 NPs/mL) of small ∼3.5 nm Au seeds with a very narrow distribution. A homogeneous nanometric growth of these seeds is then achieved by adjusting the reaction parameters: pH, temperature, sodium citrate concentration and gold precursor to seed ratio. We use this method to produce Au NPs with a precise control over their sizes between 3.5 and 10 nm and a versatile surface chemistry allowing studying the size-dependent optical properties in this transition size regime lying between clusters and nanoparticles. Interestingly, an inflection point is observed for Au NPs smaller than 8 nm in which the sensitivity of the localized surface plasmon resonance (LSPR) peak position as a function of NPs size and surface modifications dramatically increase. These studies are relevant in the design of the final selectivity, activity and compatibility of Au NPs, especially in those (bio)applications where size is a critical parameter (e.g., biodistribution, multiplex labeling, and protein interaction)., We acknowledge financial support from the Spanish Ministerio de Ciencia e Innovacion (MICINN) (MAT2012-33330) and from the Catalan Agencia de Gestio d’Ajuts Universitaris i de Recerca (AGAUR) (2014-SGR-612). Financial support from the QualityNano (INFRA-2010-262163) and FutureNanoNeeds (FP7-NMP-2013-LARGE-7) Projects financed by the European Community under the FP7 Capacities Programme is gratefully acknowledged. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC2012-10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The influence of the MOF shell thickness on the catalytic performance of composites made of inorganic (hollow) nanoparticles encapsulated into MOFs

  • Yazdi, Amirali
  • Merkoçi, Florind
  • Bastús, Neus G.
  • Imaz, Inhar
  • Puntes, Víctor F.
  • Maspoch, Daniel
Herein we report the encapsulation of hollow Pt or Pd nanoparticles into ZIF-8, making a series of composites in which the ZIF-8 shell thickness has been systematically varied. By using these composites as catalysts for the reduction of 4-nitrophenol and Eosin Y, we show that the MOF shell thickness plays a key role in the catalytic performance of this class of composites., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2015-70725-R), the Catalan AGAUR (projects 2014-SGR-80 and 2014-SGR-612), and the ERC under the EU FP7 (ERC-Co 615954). I. I. and N. G. B. thank the MINECO for their RyC grants (RYC-2010-06530 and RYC-2012-10991). N. G. B. also acknowledges financial support by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE). ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hollow metal nanostructures for enhanced plasmonics: synthesis, local plasmonic properties and applications

  • Genç, Aziz
  • Patarroyo, Javier
  • Sancho-Parramon, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Arbiol, Jordi
Metallic nanostructures have received great attention due to their ability to generate surface plasmon resonances, which are collective oscillations of conduction electrons of a material excited by an electromagnetic wave. Plasmonic metal nanostructures are able to localize and manipulate the light at the nanoscale and, therefore, are attractive building blocks for various emerging applications. In particular, hollow nanostructures are promising plasmonic materials as cavities are known to have better plasmonic properties than their solid counterparts thanks to the plasmon hybridization mechanism. The hybridization of the plasmons results in the enhancement of the plasmon fields along with more homogeneous distribution as well as the reduction of localized surface plasmon resonance (LSPR) quenching due to absorption. In this review, we summarize the efforts on the synthesis of hollow metal nanostructures with an emphasis on the galvanic replacement reaction. In the second part of this review, we discuss the advancements on the characterization of plasmonic properties of hollow nanostructures, covering the single nanoparticle experiments, nanoscale characterization via electron energy-loss spectroscopy and modeling and simulation studies. Examples of the applications, i.e. sensing, surface enhanced Raman spectroscopy, photothermal ablation therapy of cancer, drug delivery or catalysis among others, where hollow nanostructures perform better than their solid counterparts, are also evaluated., J.A. and A.G. acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638 and Spanish MICINN project e-ATOM (MAT2014-51480-ERC). J.P., N.G.B., and V.P. acknowledge financial support from the Generalitat de Catalunya 2014-SGR-612, Spanish MICINN (MAT2012-33330) and European Community (EU-FP7) through the FutureNanoNeeds project. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Probing the surface reactivity of nanocrystals by the catalytic degradation of organic dyes, the effect of size, surface chemistry and composition

  • Piella, Jordi|||0000-0002-5788-3145
  • Merkoçi, Florind|||0000-0002-4925-5317
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
We herein present a comprehensive study on how the catalytic performance and reusability of Au nanocrystals (NCs) are affected by systematic variations of crystal size, surface coating and composition. The reductions of different organic dyes (4-nitrophenol, rhodamine B and methylene blue) by borohydride ions were used as model catalytic reactions. The catalytic performance of the Au NCs ranged between 3.6 to 110 nm was found to be dependent on crystal size, indicating that Au surface atoms have a distinct size-dependent reactivity in this reaction. Similarly, the catalytic performance was found to be strongly dependent on the nature of the coating molecule, obtaining lower catalytic activities for molecules strongly bound to the Au surface. Finally, the catalytic performance was found to be dependent on the chemical composition of the NC (Au, Ag, Pt) and the model dye used as a testing system, with the highest degradation rate found for methylene blue, followed by 4-nitrophenol and rhodamine B. We believe that this study provides a better understanding of the catalytic performance of Au NCs upon controlled modifications of the structural and morphological parameters, and a working environment that can be used to facilitate the selection of the optimum NC size, coating molecule and evaluation system for a particular study of interest.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Core-shell Au/CeO2 nanoparticles supported in UiO-66 beads exhibiting full CO conversion at 100 °c

  • Yazdi, Amirali|||0000-0001-9420-8504
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Alonso González, Amanda|||0000-0002-5749-7631
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Imaz, Inhar|||0000-0002-0278-1141
  • Font, Xavier|||0000-0003-4981-7436
  • Puntes, Víctor|||0000-0001-8996-9499
  • Maspoch, Daniel|||0000-0003-1325-9161
Hybrid core-shell Au/CeO nanoparticles (NPs) dispersed in UiO-66 shaped into microspherical beads are created using the spray-drying continuous-flow method. The combined catalytic properties of nanocrystalline CeO and Au in a single particle and the support and protective function of porous UiO-66 beads make the resulting composites show good performances as catalysts for CO oxidation (T = 72 °C; T = 100 °C) and recyclability.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Seeded Growth Synthesis of Au-Fe3O4 Heterostructured Nanocrystals, Rational Design and Mechanistic Insights

  • Fantechi, Elvira|||0000-0002-9323-2198
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Coy, Emerson|||0000-0002-4149-9720
  • Jurga, Stefan
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Nogués, Josep|||0000-0003-4616-1371
  • Puntes, Víctor|||0000-0001-8996-9499
Multifunctional hybrid nanoparticles comprising two or more entities with different functional properties are gaining ample significance in industry and research. Due to its combination of properties, a particularly appealing example is Au-FeO composite nanoparticles. Here we present an in-depth study of the synthesis of Au-FeO heterostructured nanocrystals (HNCs) by thermal decomposition of iron precursors in the presence of preformed 10 nm Au seeds. The role of diverse reaction parameters on the HNCs formation was investigated using two different precursors: iron pentacarbonyl (Fe(CO)) and iron acetylacetonate (Fe(acac)). The reaction conditions promoting the heterogeneous nucleation of FeO onto Au seeds were found to significantly differ depending on the precursor chosen, where Fe(acac) is considerably more sensitive to the variation of the parameters than Fe(CO) and more subject to homogeneous nucleation processes with the consequent formation of isolated iron oxide nanocrystals (NCs). The role of the surfactants was also crucial in the formation of well-defined and monodisperse HNCs by regulating the access to the Au surface. Similarly, the variations of the [Fe]/[Au] ratio, temperature, and employed solvent were found to act on the mean size and the morphology of the obtained products. Importantly, while the optical properties are rather sensitive to the final morphology, the magnetic ones are rather similar for the different types of obtained HNCs. The surface functionalization of dimer-like HNCs with silica allows their dispersion in aqueous media, opening the path to their use in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The influence of the MOF shell thickness on the catalytic performance of composites made of inorganic (hollow) nanoparticles encapsulated into MOFs

  • Yazdi, Amirali|||0000-0001-9420-8504
  • Merkoçi, Florind|||0000-0002-4925-5317
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Imaz, Inhar|||0000-0002-0278-1141
  • Puntes, Víctor|||0000-0001-8996-9499
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report the encapsulation of hollow Pt or Pd nanoparticles into ZIF-8, making a series of composites in which the ZIF-8 shell thickness has been systematically varied. By using these composites as catalysts for the reduction of 4-nitrophenol and Eosin Y, we show that the MOF shell thickness plays a key role in the catalytic performance of this class of composites.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanosafety, towards safer nanoparticles by design

  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Background: Nanosafety aims for a solution through the safer design (and re-design) of nanostructured materials, optimizing both performance and safety, by resolving which structural features lead to the desired properties and modifying them to avoid their detrimental effects without losing their desired nanoscale properties in the process. Starting with known toxic NPs, the final aim should be the re-design of such detrimental specific NP characteristics and to redefine the way they should be manipulated from the beginning to the end of their life cycle. Methods: The researchers reviewed literature in the area of novel nanosafety strategies addressing the "safe-by-design" paradigm. Results: The potential hazards of engineered NPs are not only determined by the physicochemical properties of the engineered NPs per se but also on the interactions of these NPs with immediate surrounding environments. The aim of promoting the timely and safe development of NPs cannot be achieved via traditional studies as they address one material at one time. The development of a safer design strategy of engineered NPs requires an understanding of both intrinsic (synthetic) properties together with their extrinsic responses to external stimuli. Conclusions: We have summarized recent developments of novel nanosafety strategies addressing the "safe-by-design" paradigm for optimizing both performance and safety, allowing the comparison of results of different studies and ultimately providing guidelines for the re-design of safer NPs. The resulting discussion is intended to provide guidelines for synthetic nanochemists on how to design NPs to be safe during their full life cycle while maintaining their parental desired properties.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Size-dependent protein-nanoparticle interactions in citrate-stabilized gold nanoparticles, the emergence of the protein corona

  • Piella, Jordi|||0000-0002-5788-3145
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Surface modifications of highly monodisperse citrate-stabilized gold nanoparticles (AuNPs) with sizes ranging from 3.5 to 150 nm after their exposure to cell culture media supplemented with fetal bovine serum were studied and characterized by the combined use of UV-vis spectroscopy, dynamic light scattering, and zeta potential measurements. In all the tested AuNPs, a dynamic process of protein adsorption was observed, evolving toward the formation of an irreversible hard protein coating known as Protein Corona. Interestingly, the thickness and density of this protein coating were strongly dependent on the particle size, making it possible to identify different transition regimes as the size of the particles increased: (i) NP-protein complexes (or incomplete corona), (ii) the formation of a near-single dense protein corona layer, and (iii) the formation of a multilayer corona. In addition, the different temporal patterns in the evolution of the protein coating came about more quickly for small particles than for the larger ones, further revealing the significant role that size plays in the kinetics of this process. Since the biological identity of the NPs is ultimately determined by the protein corona and different NP-biological interactions take place at different time scales, these results are relevant to biological and toxicological studies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modeling the Optical Responses of Noble Metal Nanoparticles Subjected to Physicochemical Transformations in Physiological Environments, Aggregation, Dissolution and Oxidation

  • Piella, Jordi|||0000-0002-5788-3145
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Herein, we study how optical properties of colloidal dispersions of noble metal nanoparticles (Au and Ag) are affected by processes such as aggregation and oxidative dissolution. The optical contributions of these processes to the extinction spectra in the UV-vis region are often overlapped, making difficult its interpretation. In this regard, modeling the UV-vis spectra (in particular absorbance curve, peaks position, intensity and full width at half maximum-FWHM) of each process separately offers a powerful tool to identify the transformation of NPs under relevant and complex scenarios, such as in biological media. The proper identification of these transformations is crucial to understand the biological effects of the NPs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

One-Pot Synthesis of Cationic Gold Nanoparticles by Differential Reduction

  • Sperling, Ralph A.|||0000-0002-8027-0697
  • Garcia-Fernandez, Lorena|||0000-0001-9912-5054
  • Ojea-Jiménez, Isaac
  • Piella, Jordi|||0000-0002-5788-3145
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
The size-controlled synthesis of cationic particles by differential reduction of HAuCl precursor in the presence of NaBH and 1-aminoundecane-12-thiol (AUT) is reported. The number of seed particles is determined by the fraction of the initially Au precursor reduced by NaBH present in the reaction mixture, which are then grown larger by the AUT, acting as both weak reducing agent and stabilizing surfactant. By this methodology, size controlled synthesis is achieved in a two-step one-pot synthesis at room temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Size-controlled synthesis of Sub-10-nanometer citrate-stabilized gold nanoparticles and related optical properties

  • Piella, Jordi|||0000-0002-5788-3145
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
Highly monodisperse, biocompatible and functionalizable sub-10-nm citrate-stabilized gold nanoparticles (Au NPs) have been synthesized following a kinetically controlled seeded-growth strategy. The use of traces of tannic acid together with an excess of sodium citrate during nucleation is fundamental in the formation of a high number (7 × 10 NPs/mL) of small ∼3.5 nm Au seeds with a very narrow distribution. A homogeneous nanometric growth of these seeds is then achieved by adjusting the reaction parameters: pH, temperature, sodium citrate concentration and gold precursor to seed ratio. We use this method to produce Au NPs with a precise control over their sizes between 3.5 and 10 nm and a versatile surface chemistry allowing studying the size-dependent optical properties in this transition size regime lying between clusters and nanoparticles. Interestingly, an inflection point is observed for Au NPs smaller than 8 nm in which the sensitivity of the localized surface plasmon resonance (LSPR) peak position as a function of NPs size and surface modifications dramatically increase. These studies are relevant in the design of the final selectivity, activity and compatibility of Au NPs, especially in those (bio)applications where size is a critical parameter (e.g., biodistribution, multiplex labeling, and protein interaction).