Skip to main content

FUNCIONALIZACION SUPERFICIAL DE MATERIALES PARA APLICACIONES AVANZADAS

MAT2015-69035-REDC

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Gas Sensing of Ammonia and Amines Based on Protonated Porphyrin/TiO2 Composite Thin Films

  • Castillero, Pedro
  • Roales, Javier
  • Lopes-Costa, Tânia
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • González-Elipe, Agustín R.
  • Pedrosa, José M.
Open porous and transparent microcolumnar structures of TiO<sub>2</sub> prepared by physical vapour deposition in glancing angle configuration (GLAD-PVD) have been used as host matrices for two different fluorescent cationic porphyrins, 5-(<i>N</i>-methyl 4-pyridyl)-10,15,20-triphenyl porphine chloride (MMPyP) and meso-tetra (<i>N</i>-methyl 4-pyridyl) porphine tetrachloride (TMPyP). The porphyrins have been anchored by electrostatic interactions to the microcolumns by self-assembly through the dip-coating method. These porphyrin/TiO<sub>2</sub> composites have been used as gas sensors for ammonia and amines through previous protonation of the porphyrin with HCl followed by subsequent exposure to the basic analyte. UV–vis absorption, emission, and time-resolved spectroscopies have been used to confirm the protonation–deprotonation of the two porphyrins and to follow their spectral changes in the presence of the analytes. The monocationic porphyrin has been found to be more sensible (up to 10 times) than its tetracationic counterpart. This result has been attributed to the different anchoring arrangements of the two porphyrins to the TiO<sub>2</sub> surface and their different states of aggregation within the film. Finally, there was an observed decrease of the emission fluorescence intensity in consecutive cycles of exposure and recovery due to the formation of ammonium chloride inside the film., We thank the Junta de Andalucía (Project: FQM-2310), the European Regional Development Funds program (EU-FEDER) and the Spanish Ministry of Economy and Competitiveness (Projects: MAT2013-40852-R, MAT2013-42900-P, MAT2014-57652-C2-2-R, MAT2015-69035-REDC, MINECO-CSIC 201560E055, PCIN-2015-169-C02-02 under a 2014 M-Era.Net project and RECUPERA 2020), for financial support. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization and validation of a-Si magnetron-sputtered thin films as solid He targets with high stability for nuclear reactions

  • Godinho, Vanda
  • Ferrer, F. J.
  • Fernández-Martínez, Begoña
  • Caballero-Hernández, J.
  • Gómez-Camacho, Joaquín
  • Fernández-Camacho, A.
In this work, we present our magnetron sputtering based methodology to produce amorphous silicon coatings with closed porosity, as a strategy to fabricate solid helium targets, in the form of supported or self-supported thin films, for nuclear reactions. We show how by changing the He working pressure it is possible to obtain highly porous homogeneous structures incorporating different He amounts. These porous coatings (a-Si:He) are very reproducible from run to run, and the high He amount incorporated makes them excellent candidates for solid He targets. The possibility of producing self-supported films is illustrated here, and its potential use in inverse kinematics experiments with radioactive beams is shown through the dispersion in forward geometry of a stable 6Li beam. Also the elastic scattering cross-sections for proton from helium were determined using an a-Si:He coating. The results agree well with the ones reported in the literature. These two examples validate our coatings as good candidates to be used as solid He targets in nuclear reactions. The stability of He inside the coatings, fundamental for its use as solid He targets, was investigated, both over time and after irradiation. The coatings proved to be very stable, and the amount of He inside the pores remains unaltered at least 2 years after deposition and after high irradiation fluence (5 × 1017 particles/cm2; with a dose rate of 5 × 1012 particles/(cm2 s))., This work was supported by the Spanish Ministry MINECO (projects FPA2013-47327-C2-1-R and MAT2015-69035-REDC), the CSIC (PIE 201460E018) and the EU 7FP (Project Al-NanoFunc CT-REGPOT-2011-285895) and the OpenAIRE FP7 Post-grant open access pilot program for open access publication funding., USD 2,000 APC fee funded by the EC FP7 Post-Grant Open Access Pilot, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser‐induced coloration of ceramic tiles covered with magnetron sputtered precursor layers

  • Rico, Víctor J.
  • Lahoz, Ruth
  • Rey-García, F.
  • Francisco, I. de
  • Gil-Rostra, J.
  • Espinós, J.P.
  • Fuente, Germán F. de la
  • González-Elipe, Agustín R.
This paper reports a new methodology for the coloring of glazed ceramic tiles consisting of the near infrared pulsed laser processing of copper containing oxide coatings prepared by magnetron sputtering. As a second approach, the employ for the same purpose of a novel laser furnace technique is also described. Changing the laser parameters and using the laser furnace to treat the tiles at high temperature during irradiation has resulted in a wide color palette. The optical characterization of the modified tiles by UV‐Vis spectroscopy has been complemented with their microstructural and compositional analysis by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Time Of Flight Secondary Ion Mass Spectrometry (TOF‐SIMS). The chemical composition of the surface was obtained by X‐ray Photoemission Spectroscopy (XPS) and its structure determined by X?ray diffraction (XRD). The chemical resistance was characterized by several tests following the norm ISO 10545‐13. Color changes have been attributed to surface microstructural and chemical transformations that have been accounted for by simple models involving different ablation, melting, diffusion, and segregation/agglomeration phenomena depending on the laser treatments employed., Financial support from the EU (LIFE11/ENV/ES560), Innovaragón (ITA‐DGA/ES 1368), DGA (Group T87), and projects 201560E055, MAT2015‐69035‐REDC and MAT2016‐79866‐R from MINECO are gratefully acknowledged. F. Rey‐García acknowledges the Portuguese Science and Technology Foundation (FCT) for the Grant SFRH/BPD/108581/2015., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment

  • Santiago, José Antonio
  • Fernández-Martínez, Iván
  • Wennberg, A.
  • Molina-Aldareguia, Jon
  • Castillo-Rodríguez, Miguel
  • Rojas, T. Cristina
  • Sánchez-López, J.C.
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Li, H.
  • Bellido-González, Victor
  • Monclús, M.A.
  • González-Arrabal, Raquel
Poor adhesion is a recurrent problem for the wider use of diamond-like carbon (DLC) coatings in industrial applications. In this work, we investigate the effectiveness of high-power impulse magnetron sputtering (HiPIMS) metal ion etching to improve the adhesion of DLC coatings on high speed steel substrates. The influence of HiPIMS pretreatment parameters, the metal ion selection for the process and the addition of bonding layers on the adhesion properties were studied. Daimler-Benz and nanoscratch test methods were used to evaluate the adhesion. The elemental composition, morphology and microstructure of the samples were evaluated by EELS, SEM, AFM and HRTEM. In general, samples pretreated with HiPIMS metal ion etching withstand larger critical loads than those pretreated by conventional Ar+ glow discharge and bonding layers. The pretreatment is proven to be very effective at removing surface contaminants and providing a gradual interface. The selection of Cr over Ti contributes to a significant improvement on the adhesion due to the reduction of the oxygen level at the interface thus ensuring an optimal coating-substrate contact and a more compliant structure, which prevents the delamination failure., The research leading to these results has received funding from Madrid region under programme S2013/MIT-2775, DIMMAT project. Financial support from MINECO under projects (RADIAFUS IV ENE2015-70300-C3-3-R, MAT2014-59772-C2-1-P, MAT2015-69035-REDC FUNCOAT+), Leverhulme International Network Grant (CARBTRIB) and EUROfusion Consortium under project AWP15-ENR-01/CEA-02 are also acknowledged, as well as the service from the X-SEM Laboratory at IMN under project CSIC13-4E-1794 with support from EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanostructured coatings made by oblique deposition with sputtering

  • González Sagardoy, María Ujué
  • Álvarez, Rafael
  • Palmero, Alberto
  • García-Martín, José Miguel
Trabajo presentado en el 7th Spanish Workshop in Nanolithography, celebrado en Madrid, del 23 al 25 de octubre de 2017, A low-cost approach to fabricate nanostructured coatings will be presented: oblique deposition with sputtering. This technique is energetically efficient and environmentally friendly, since it takes place at room tem perature in one single step and no chemicals are involved (thus without recycling problems). Any kind of flat substrate can be used, and with feasible modifications, it can be scaled up to large surfaces. The growth regimes [1-3] and the deposition rate [4] of the nanostructured coatings obtained using two different materials, gold and titanium, will be discussed. It will be shown that the formation of nanostructures is the outcome of self-shadowing effects when vapor species arrive at the film surface along a tilted direction (see Figure). In fact, we have developed a fundamental framework to explain the different morphologies obtained, the key factor being the thermalization degree of sputtered particles that accounts for the collisional processes in the vapor phase between the travelling atoms and the plasma species. In particular, at low pressures, tilted nanocolumns can be obtained when the angle of incidence surpasses a critical threshold. Moreover, if substrate rotation is used, the majority of nanostr uctures becomes axially symmetric. Several applications of such nanocolumnar coatings will be reviewed, especially focusing in two of them: black metals [5] and antibacterial coatings [6]., Support from the IDEA² Award (M+Vision Consortium) and funding from MINECO (MAT2014-59772-C2-1, MAT2015-69035-REDC) and Domingo Martinez Foundation are acknowledged. We also acknowledge the service from the X-SEM Laboratory at IMM, and funding from MINECO under project CSIC13-4E1794 with support from EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Black gold coatings fabricated by glancing angle deposition with sputtering

  • González Sagardoy, María Ujué
  • Álvarez, Rafael
  • Palmero, Alberto
  • García-Martín, José Miguel
Trabajo presentado en el 15th International Conference on Near-Field Optics, Nanophotonics and Related Techniques, NFO15, celebrado en Troyes (Francia), del 26 al 31 de agosto de 2018, Black metal coatings are metallic coatings that exhibit high absorption in a certain region of the electromagnetic spectra. They are of interest in a wide range of applications such as radiative heat exchangers, solar energy absorbers, photovoltaic cells electrodes, separators to avoid cross effects in optical devices, thermal light emitters, or biosensors electrodes, to name a few. In particular, gold is frequently used due to its high resistance to oxidation. In the last few years, we have fabricated metallic coatings with nanocolumnar morphology by means of glancing angle deposition with magnetron sputtering [1-4]. This technique allows for obtaining nanostructured coatings onto any kind of flat substrates and it can be scaled up to large areas. Depending on the deposition parameters (such as gas pressure, tilt angle, substrate rotation, etc.), the nanocolumnar structure can be controlled, giving rise to different properties. In this work, we report the fabrication of black gold coatings in the visible range with this fabrication technique [5]. We will present the optical properties of the nanostructured films, showing that high tilt angle is needed to achieve the black metal behaviour (see Figure 1) with reflectivity below 10% in the 400-700 nm range for Au films deposited on Si. We will analyse the morphological characteristics of the samples in order to understand the main features responsible for this black metal behaviour., The authors acknowledge MINECO (Projects MAT2014-59772-C2-1, MAT2015-69035-REDC and CSIC13-4E-1794) and EU (FEDER, FSE) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silver effect on the tribological and antibacterial properties of a-C:Ag coatings

  • Domínguez-Meister, Santiago
  • Rojas, T. Cristina
  • Frías, José Enrique
  • Sánchez-López, J.C.
a-C:Ag coatings (1.2–23.4 at.% of Ag) were deposited using magnetron sputtering. Ag nanoparticles appear embedded in the carbon matrix or segregated to the column boundaries or surface. The silver doping has not promoted significant changes of the sp2/sp3 ratio although a decrease of the hardness is observed (from 17 to 7 GPa). The tribological behavior did not show a clear dependence on the silver concentration in unlubricated or lubricated conditions (fetal bovinum serum) against alumina or UHMWPE balls. Ag nanoparticle dispersion enhanced the bactericide behavior as determined by the released Ag+ ion in the fluid media. There is no clear effect of friction rubbing on the released silver indicating that diffusion and top segregation are prevalent mechanisms for its dissolution., European Regional Development Funds program (EU-FEDER), Leverhulme International Network Grant (CARBTRIB), Spanish Ministry of Economy, Industry and Competitiveness (projects n° MAT2015-65539-P and MAT2015-69035-REDC), Junta de Andalucía (project P10-TEP 06782) and CSIC (201560E013) are acknowledged for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antibacterial Nanostructured Ti Coatings by Magnetron Sputtering: From Laboratory Scales to Industrial Reactors

  • Álvarez, Rafael
  • Muñoz-Piña, Sandra
  • González Sagardoy, María Ujué
  • Izquierdo-Barba, Isabel
  • Fernández-Martínez, Iván
  • Rico, Víctor J.
  • Arcos, Daniel
  • García-Valenzuela, Aurelio
  • Palmero, Alberto
  • Vallet-Regí, María
  • González-Elipe, Agustín R.
  • García-Martín, José Miguel
Based on an already tested laboratory procedure, a new magnetron sputtering methodology to simultaneously coat two-sides of large area implants (up to ~15 cm2) with Ti nanocolumns in industrial reactors has been developed. By analyzing the required growth conditions in a laboratory setup, a new geometry and methodology have been proposed and tested in a semi-industrial scale reactor. A bone plate (DePuy Synthes) and a pseudo-rectangular bone plate extracted from a patient were coated following the new methodology, obtaining that their osteoblast proliferation efficiency and antibacterial functionality were equivalent to the coatings grown in the laboratory reactor on small areas. In particular, two kinds of experiments were performed: Analysis of bacterial adhesion and biofilm formation, and osteoblasts–bacteria competitive in vitro growth scenarios. In all these cases, the coatings show an opposite behavior toward osteoblast and bacterial proliferation, demonstrating that the proposed methodology represents a valid approach for industrial production and practical application of nanostructured titanium coatings., The authors acknowledge the financial support from the European Regional Development Funds program (EU-FEDER) and the MINECO-AEI (201560E055, MAT2014-59772-C2-1-P, MAT2016-75611-R, and MAT2016-79866-R and network MAT2015-69035-REDC). The authors also thank the University of Seville (V and VI PPIT-US) and Fundación Domingo Martínez for financial support. M.V.-R. also thanks the European Research Council (advanced grant VERDI; ERC-2015-AdG proposal 694160). The authors thank the MiNa Laboratory at IMN funded by CM (S2018/NMT-4291 TEC2SPACE), MINECO (CSIC13-4E-1794), and the EU (FEDER, FSE) for the support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural control in porous/compact multilayer systems grown by magnetron sputtering

  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • Álvarez, Rafael
  • Rico, Víctor J.
  • Cotrino, José
  • González-Elipe, Agustín R.
  • Palmero, Alberto
In this work we analyze a phenomenon that takes place when growing magnetron sputtered porous/compact multilayer systems by alternating the oblique angle and the classical configuration geometries. We show that the compact layers develop numerous fissures rooted in the porous structures of the film below, in a phenomenon that amplifies when increasing the number of stacked layers. We demonstrate that these fissures emerge during growth due to the high roughness of the porous layers and the coarsening of a discontinuous interfacial region. To minimize this phenomenon, we have grown thin interlayers between porous and compact films under the impingement of energetic plasma ions, responsible for smoothing out the interfaces and inhibiting the formation of structural fissures. This method has been tested in practical situations for compact TiO/porous SiO multilayer systems, although it can be extrapolated to other materials and conditions., Authors acknowledge the University of Seville (VPPI-US), the Junta de Andalucía (TEP8067, TEP5283 and P12–2265MO) and the Ministry of Economy and Competitiveness of Spain (MAT2013-42900-P, MAT2013-40852-R, MAT2016-79866-R, MAT2015-69035-REDC) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Micron-scale wedge thin films prepared by plasma enhanced chemical vapor deposition

  • López-Santos, Carmen
  • Álvarez, Rafael
  • Palmero, Alberto
  • Borrás, Ana
  • Casquel del Campo, Rafael
  • Holgado, Miguel
  • González-Elipe, Agustín R.
Wedge-shaped materials are currently employed for optical analyses and sensing applications. In this paper, we present an easy to implement plasma enhanced chemical vapor deposition procedure to grow wedge-shaped thin films with controlled slope at the scale of few hundred microns. The method relies on the use of few tenths micron height obstacles to alter the laminar flow of precursor gas during deposition and is applied for the fabrication of wedge-shaped ZnO thin films. Local interference patterns, refractive index, and birefringence of the films have been measured with one micron resolution using a specially designed optical set-up. Their micro- and nano-structures have been characterized by means of scanning electron microscopy and theoretically reproduced by Monte Carlo calculations., We acknowledge the support of the University of Seville (VPPI‐US), the European Development Funds program (EU‐FEDER), and the Spanish Ministry of Economy and Competitiveness and Agencial Estatal de Investigación (AEI) (projects MAT2013‐40852‐R, MAT2016‐79866‐R, MAT2015‐69035‐R, 201560E055, and MAT2015‐69035‐REDC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dye giant absorption and light confinement effects in porous bragg microcavities

  • Oliva-Ramírez, Manuel
  • Gil-Rostra, J.
  • Simonsen, Adam C.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
This work presents a simple experimental procedure to probe light confinement effects in photonic structures. Two types of porous 1D Bragg microcavities with two resonant peaks in the reflection gap were prepared by physical vapor deposition at oblique angle configurations and then infiltrated with dye solutions of increasing concentrations. The unusual position shift and intensity drop of the transmitted resonant peak observed when it was scanned through the dye absorption band have been accounted for by the effect of the light trapped at their optical defect layer. An experimentally observed giant absorption of the dye molecules and a strong anomalous dispersion in the refractive index of the solution are claimed as the reasons for the observed variations in the Bragg microcavity resonant feature. Determining the giant absorption of infiltrated dye solutions is proposed as a general and simple methodology to experimentally assess light trapping effects in porous photonic structures., The authors thank the European Regional Development Funds Program (EU-FEDER) and the MINECO-AEI (Projects MAT2013-40852-R, 201560E055, and MAT2016-79866-R and network MAT2015-69035-REDC) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tribological properties of TiC/a-C:H nanocomposite coatings prepared via HiPIMS

  • Sánchez-López, J.C.
  • Domínguez-Meister, Santiago
  • Rojas, T. Cristina
  • Colasuonno, M.
  • Bazzan, M.
  • Patelli, A.
High power impulse magnetron sputtering (HiPIMS) technology has been employed to prepare TiC/a-C:H nanocomposite coatings from a titanium target in acetylene (C2H2) reactive atmospheres. Gas fluxes were varied from 1.3 to 4.4 sccm to obtain C/Ti ratios from 2 to 15 as measured by electron probe microanalysis (EPMA). X-ray diffraction and transmission electron microscopy demonstrate the presence of TiC nanocrystals embedded in an amorphous carbon-based matrix. The hardness properties decrease from 17 to 10 GPa as the carbon content increases. The tribological properties were measured using a pin-on-disk tribometer in ambient air (RH= 30-40%) at 10 cm/s with 5 N of applied load against 6-mm 100Cr6 balls. The friction coefficient and the film wear rates are gradually improved from 0.3 and 7×10-6 mm3/Nm to 0.15 and 2×10-7 mm3/Nm, respectively, by increasing the C2H2 flux. To understand the tribological processes appearing at the interface and to elucidate the wear mechanism, microstructural and chemical investigations of the coatings were performed before and after the friction test. EPMA, X-ray photoelectron and electron energy-loss spectroscopies were employed to obtain an estimation of the fraction of the a-C:H phase, which can be correlated with the tribological behavior. Examination of the friction counterfaces (ball and track) by Raman microanalysis reveals an increased ordering of the amorphous carbon phase concomitant with friction reduction. The tribological results were compared with similar TiC/a-C(H) composites prepared by the conventional direct current process., The authors are grateful to the Spanish Ministry of Economy, Industry and Competitiveness (Projects Nos. MAT2015-65539-P and MAT2015-69035-REDC) and Leverhulme International Network Grant (CARBTRIB) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sensing and biosensing with screen printed electrodes modified with nanostructured nickel oxide thin films prepared by magnetron sputtering at oblique angles

  • Salazar, Pedro
  • García-García, Francisco J.
  • González-Elipe, Agustín R.
This work reports about the sensing and biosensing applications of a novel screen printed electrode (SPE) modified by nanostructured nickel oxide thin films obtained by reactive magnetron sputtering under an oblique angle configuration. Using these films as electrodes we demonstrate their ability to detect hydrogen peroxide under neutral pH conditions. Furthermore, as a proof-of-concept, NiO-modified SPEs have been developed and their cholesterol biosensing properties determined by cyclic voltammetry and chronoamperometry., The support of projects RECUPERA 2020, from MINECO and the “Fondo social Europeo”, IPT-2012-0961-300000, 201560E055, MAT2016-79866-R and network MAT2015-69035-REDC are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinetic energy-induced growth regimes of nanocolumnar Ti thin films deposited by evaporation and magnetron sputtering

  • Álvarez, Rafael
  • García-Valenzuela, Aurelio
  • Rico, Víctor J.
  • García-Martín, José Miguel
  • Cotrino, José
  • González-Elipe, Agustín R.
  • Palmero, Alberto
We experimentally analyze different growth regimes of Ti thin films associated to the existence of kinetic energy-induced relaxation mechanisms in the material's network when operating at oblique geometries. For this purpose, we have deposited different films by evaporation and magnetron sputtering under similar geometrical arrangements and at low temperatures. With the help of a well-established growth model we have found three different growth regimes: (i) low energy deposition, exemplified by the evaporation technique, carried out by species with typical energies in the thermal range, where the morphology and density of the film can be explained by solely considering surface shadowing processes, (ii) magnetron sputtering under weak plasma conditions, where the film growth is mediated by surface shadowing mechanisms and kinetic-energy-induced relaxation processes, and (iii) magnetron sputtering under intense plasma conditions, where the film growth is highly influenced by the plasma, and whose morphology is defined by nanocolumns with similar tilt than evaporated films, but with much higher density. The existence of these three regimes explains the variety of morphologies of nanocolumnar Ti thin films grown at oblique angles under similar conditions in the literature., The authors thank the European Regional Development Funds program (EU-FEDER) and the MINECO-AEI (201560E055, MAT2014-59772-C2-1-P, and MAT2016-79866-R and network MAT2015-69035-REDC) for financial support. The authors also acknowledge the financial support of the University of Seville (V and VI PPIT-US). The National Center for Accelerators (Seville, Spain) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

2D compositional self-patterning in magnetron sputtered thin films

  • García-Valenzuela, Aurelio
  • Álvarez, Rafael
  • Rico, Víctor J.
  • Espinós, J.P.
  • López-Santos, Carmen
  • Solís Céspedes, Javier
  • Siegel, Jan
  • Campo, Ángel Adolfo del
  • Palmero, Alberto
  • González-Elipe, Agustín R.
7 pags., 5 figs., Unlike topography patterning, widely used for numerous applications and produced by means of different technologies, there are no simple procedures to achieve surface compositional patterning at nanometric scales. In this work we have developed a simple method for 2D patterning the composition of thin films. The method relies on the magnetron sputtering deposition at oblique angles onto patterned substrates made by laser induced periodic surface structures (LIPSS). The method feasibility has been demonstrated by depositing SiOx thin films onto LIPSS structures generated in Cr layers. A heterogeneous and aligned distribution of O/Si ratios (and different Sin+ chemical states) along the LIPSS structure in length scales of some hundreds nm's has been proven by angle resolved X-ray photoelectron spectroscopy and a patterned arrangement of composition monitored by atomic force microscopy-Raman analysis. The obtained results are explained by the predictions of a Monte Carlo simulation of this deposition process and open the way for the tailored one-step fabrication of surface devices with patterned compositions., The authors thank the European Regional Development Fund program (EU-FEDER) and the MINEICO-AEI (201560E055, MAT2016-79866-R, TEC2017-82464-R projects and network MAT2015-69035-REDC) for financial support. We also acknowledge the support of the University of Seville (V and VI PPIT-US).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrophobicity, freezing delay, and morphology of laser-treated aluminum surfaces

  • Rico, Víctor J.
  • López-Santos, Carmen
  • Villagrá, Martín
  • Espinós, J.P.
  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Borrás, Ana
  • González-Elipe, Agustín R.
Until recently, superhydrophobicity was considered as a hint to predict surface icephobicity, an association of concepts that is by no means universal and that has been proven to depend on different experimental factors and material properties, including the actual morphology and chemical state of surfaces. This work presents a systematic study of the wetting and freezing properties of aluminum Al6061, a common material widely used in aviation, after being subjected to nanosecond pulsed IR laser treatments to modify its surface roughness and morphology. All treated samples, independent of their surface finishing state, presented initially an unstable hydrophilic wetting behavior that naturally evolved with time to reach hydrophobicity or even superhydrophobicity. To stabilize the surface state and to bestow the samples with a permanent and stable hydrophobic character, laser-treated surfaces were covered with a thin layer of CFx prepared by plasma-enhanced chemical vapor deposition. A systematic comparison between freezing delay (FD) and wetting properties of water droplets onto these plasma-/polymer-modified laser-treated surfaces that, under conditions where a heterogeneous nucleation mechanism prevails, surface morphology rather than the actual value of the surface roughness parameter the key feature for long FD times. In particular, it is found that surface morphologies rendering a Cassie–Baxter wetting regime longer FDs than those characterized by a Wenzel-like wetting state. It is that laser treatment, with or without additional coverage with thin CFx coatings, affects wetting and ice formation behaviors and might be an efficient procedure to mitigate icing problems on metal surfaces., This work has been carried out with the support of the EU project PHOBIC2ICE (ref 690819). The authors also thank the European Regional Development Funds program (EU-FEDER) and the MINECO-AEI (201560E055 and MAT2016-79866-R and network MAT2015-69035-REDC) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Liquid switchable radial polarization converters made of sculptured thin films

  • Oliva-Ramírez, Manuel
  • Rico, Víctor J.
  • Gil-Rostra, J.
  • Bertrán, Enric
  • Serna, Rosalía
  • González-Elipe, Agustín R.
  • Yubero, Francisco
7 pags., 6 figs., 1 app., A radial polarization converter is a super-structured optical retarder that converts a conventional linearly polarized light beam into a structured beam with radial or azimuthal polarization. We present a new type of these sophisticated optical elements, which is made of porous nanostructured sculptured single thin films or multilayers prepared by physical vapor deposition at an oblique angle. They are bestowed with an axisymmetric retardation activity (with the fast axis in a radial configuration). In particular, a Bragg microcavity multilayer that exhibits a tunable transmission peak in the visible range with a retardance of up to 0.35 rad has been fabricated using this methodology. Owing to the highly porous structure of this type of thin films and multilayers, their retardance could be switched off by liquid infiltration. These results prove the possibility of developing wavelength dependent (through multilayer optical design) and switchable (through vapor condensation or liquid infiltration within the pore structure) radial polarization converters by means of oblique angle physical vapor deposition., We acknowledge the support of the European Regional Development Funds program (EU-FEDER), the Spanish MinistryEconomy, Industry, and Competitiveness (projects 201560E055,MAT2016-79866-R, RECUPERA 2020 and Red CONSOLIDER MAT2015-69035-REDC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silver nanopillar coatings grown by glancing angle magnetron sputtering for reducing multipactor effect in spacecrafts

  • Troncoso, G.
  • García-Martín, José Miguel
  • González Sagardoy, María Ujué
  • Morales, Carlos
  • Fernández Castro, Marcial
  • Soler-Morala, Jimena
  • Galán, Luis
  • Soriano, Leonardo
We have studied nanometric high aspect ratio Ag nanopillar coatings exhibiting reduced secondary electron emission for the mitigation of multipactor effect in radio-frequency space devices of high frequency and high power. The Ag nanopillars have been grown by glancing angle deposition with DC magnetron sputtering. Some samples have been covered by a gold capping layer to reduce oxidation and aging effects. The secondary emission yield of the surfaces of these samples has been measured and compared to those of flat Ag and Au reference samples. The results show that high aspect ratio surface roughness at the nanometer scale significantly reduce the secondary emission yield of the surface. This reduction is more important for low electron energies, which is the most influencing energy range of electrons for multipactor. The multipactor region for the nanopillar coating presenting the best secondary emission yield properties has been simulated, finding practical suppression of multipactor effect. The high-frequency surface resistance of these samples has also been estimated from published computations for similar surface roughness patterns. It was found that such nanopillar coatings are compatible with the best accomplishments of present space industry., This investigation has been funded by the MINECO of Spain through the AYA2012-39832-C02-02, FIS2015-67367-C2-1-P, MAT2015-69035-REDC and MAT2014-59772-C2-1-P projects and by the Comunidad de Madrid through the NANOMAGCOST-CM Ref: P2018/NMT4321 project. One of the authors (C.M.) thanks MECD for FPU14/02020 grant. The authors also want to thank SEGAINVEX and SIdI from UAM for technical support, and to acknowledge the service from the MiNa Laboratory at IMN funded by Comunidad de Madrid (S2018/NMT-4291 TEC2SPACE), MINECO (CSIC13-4E-1794) and the European Union (FEDER, FSE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-induced coloration of ceramic tiles covered with magnetron sputtered precursor layers

  • Rico, V.J.
  • Lahoz, R.
  • Rey-García, F.
  • de Francisco, I.
  • Gil-Rostra, J.
  • Espinós, J.P.
  • de la Fuente, G.F.
  • González-Elipe, A.R.
This paper reports a new methodology for the coloring of glazed ceramic tiles consisting of the near infrared pulsed laser processing of copper containing oxide coatings prepared by magnetron sputtering. As a second approach, the employ for the same purpose of a novel laser furnace technique is also described. Changing the laser parameters and using the laser furnace to treat the tiles at high temperature during irradiation has resulted in a wide color palette. The optical characterization of the modified tiles by UV-Vis spectroscopy has been complemented with their microstructural and compositional analysis by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Time Of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The chemical composition of the surface was obtained by X-ray Photoemission Spectroscopy (XPS) and its structure determined by X?ray diffraction (XRD). The chemical resistance was characterized by several tests following the norm ISO 10545-13. Color changes have been attributed to surface microstructural and chemical transformations that have been accounted for by simple models involving different ablation, melting, diffusion, and segregation/agglomeration phenomena depending on the laser treatments employed.
Docta Complutense
Publication Artículo científico (JournalArticle)

Insights into the role of the layer architecture of Cr–Ti–N based coatings in long-term high temperature oxidation experiments in steam atmosphere

  • Mato Díaz, María Sonia
  • Pérez Trujillo, Francisco Javier
  • Alcalá Penadés, Germán
  • Sánchez López, J.C.
  • Barriga, J.
Knowledge on hard coatings has been applied in the energy field extending their use as protecting coatings of steam power generation plants components. The role of the layer architecture of Cr–Ti–N based coatings deposited by reactive cathodic arc evaporation on P92 steel substrates was studied with the focus on their oxidation resistance at 650 °C in 100% steam atmosphere up to 2000 h. Characterization of the coatings was performed by gravimetry, scanning electron microscopy, electron probe microanalysis, glow discharge optical emission spectroscopy, X-ray diffraction, thermodynamic simulations using the CALPHAD method, Rockwell C indentation and nanoindentation. The layered arrangement improves the oxidation resistance of TiN under the working conditions of steam power plants, as well as the mechanical properties of CrN. The produced architectures performance under the described working conditions boosts the understanding of the processes taking place at high temperature, making possible the design of optimal coatings combining the best behavior of both nitrides for each specific application, reaching a corrosion protection at high temperature in water vapor comparable to that of CrN and a hardness and Young's modulus as high as those of TiN.