Skip to main content

MATERIALES AVANZADOS BASADOS EN NANOCOLUMNAS Y NANOPARTICULAS EN AREA GRANDE

MAT2014-59772-C2-2-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Precisely controlled fabrication, manipulation and in-situ analysis of Cu based nanoparticles

  • Martínez, Lidia
  • Lauwaet, K.
  • Santoro, G.
  • Sobrado, J. M.
  • Peláez, R. J.
  • Herrero, V. J.
  • Tanarro, I.
  • Ellis, G. J.
  • Cernicharo, J.
  • Joblin, Christine
  • Huttel, Y.
  • Martín Gago, J. A.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. Martínez, L. [0000-0002-9370-2962] ; Santoro, G. [0000-0003-4751-2209] ; Ellis, G. [0000-0003-4851-6092] ; Joblin, C. [0000-0003-1561-6118], The increasing demand for nanostructured materials is mainly motivated by their key role in a wide variety of technologically relevant fields such as biomedicine, green sustainable energy or catalysis. We have succeeded to scale-up a type of gas aggregation source, called a multiple ion cluster source, for the generation of complex, ultra-pure nanoparticles made of different materials. The high production rates achieved (tens of g/day) for this kind of gas aggregation sources, and the inherent ability to control the structure of the nanoparticles in a controlled environment, make this equipment appealing for industrial purposes, a highly coveted aspect since the introduction of this type of sources. Furthermore, our innovative UHV experimental station also includes in-flight manipulation and processing capabilities by annealing, acceleration, or interaction with background gases along with in-situ characterization of the clusters and nanoparticles fabricated. As an example to demonstrate some of the capabilities of this new equipment, herein we present the fabrication of copper nanoparticles and their processing, including the controlled oxidation (from Cu0 to CuO through Cu2O, and their mixtures) at different stages in the machine., This work was supported by the European Union [grant number ERC-2013-SyG 610256 NANOCOSMOS]; the Spanish MINECO [grant numbers MAT2017-85089-C2-1-R, MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2014-59772-C2-2-P, FIS2016-77578-R, FIS2013-48087-C2-1P, FIS2016-77726-C3-1P and CSIC13-4E-1775]. The authors would also like to thank Miguel Cañas, Javier Pérez and José Flores from the ICMM mechanical workshop for their invaluable help., Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Core@shell, Au@TiOx nanoparticles by gas phase synthesis

  • Martínez Orellana, Lidia
  • Mayoral, Álvaro
  • Espiñeira, Martín
  • Román García, Elisa Leonor
  • Palomares, F. Javier
  • Huttel, Yves
Herein, gas phase synthesis and characterization of multifunctional core@shell, Au@TiOx nanoparticles have been reported. The nanoparticles were produced via a one-step process using a multiple-ion cluster source under a controlled environment that guaranteed the purity of the nanoparticles. The growth of the Au cores (6 nm diameter) is stopped when they pass through the Ti plasma where they are covered by an ultra-thin (1 nm thick) and homogeneous titanium shell that is oxidized in-flight before the soft-landing of the nanoparticles. The Au cores were found to be highly crystalline with icosahedral (44%) and decahedral (66%) structures, whereas the shell, mainly composed of TiO2 (79%), was not ordered. The highly electrical insulating behaviour of the titanium oxide shell was confirmed by the charging effect produced during X-ray photoemission spectroscopy., This work was supported by the European ERC-2013-SyG 610256 NANOCOSMOS and European Union Seventh Framework Programme under grant agreement no. 604391 FET Graphene Flagship and by the Spanish Ministerio de Ciencia e Innovación under projects no. MAT2014-59772-C2-2-P and MAT2016-80394-R. A. M. acknowledges the Government of Aragon and the European Social Fund under the project grant number E/26 “Construyendo Europa desde Aragón” 2014–2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Synthesis of Graphene on Silicon Oxide by low temperature Plasma Enhanced Chemical Vapor Deposition

  • Muñoz, Roberto
  • Martínez Orellana, Lidia
  • López-Elvira, Elena
  • Munuera, C.
  • Huttel, Yves
  • García-Hernández, Mar
Direct graphene growth on silicon with native oxide using Plasma enhanced Chemical Vapour Deposition at low temperatures [550 ºC -650 ºC] is demonstrated for the first time. It is shown that fine tuning of a two step synthesis with gas mixtures C2H2/H2 yield monolayer and few layer graphene films with controllable domain size from 50 nm to more than 300 nm and sheet resistance ranging from 8 kΩ·sq-1 to less than 1.8 kΩ·sq-1 . Differences are understood in terms of the interaction of the plasma species -chiefly atomic H- with the deposited graphene and the native oxide layer. The proposed low temperature direct synthesis on an insulating substrate does not require any transfer processes and improves compatibility with current industrial processes., Program in Sciences. ERC-synergy program funding (grant ERC-2013-SYG-610256 Nanocosmos), Spanish MINECO MAT2014-59772-C2-2-P funding and EU Graphene Flagship funding (Grant Graphene Core2 785219) are acknowledged. C. M. acknowledges the financial support by the ‘Ramón y Cajal’ Program of MINECO (RYC-2014-16626)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Precisely controlled fabrication, manipulation and in-situ analysis of Cu based nanoparticles

  • Martínez Orellana, Lidia
  • Lauwaet, Koen
  • Santoro, Gonzalo
  • Sobrado, Jesús Manuel
  • Peláez, Ramón J.
  • Herrero, Víctor J.
  • Tanarro, Isabel
  • Ellis, Gary James
  • Cernicharo, José
  • Joblin, C.
  • Huttel, Yves
  • Martín-Gago, José A.
13 pags., 8 figs. -- Open Access funded by Creative Commons Atribution Licence 4.0, The increasing demand for nanostructured materials is mainly motivated by their key role in a wide variety of technologically relevant fields such as biomedicine, green sustainable energy or catalysis. We have succeeded to scale-up a type of gas aggregation source, called a multiple ion cluster source, for the generation of complex, ultra-pure nanoparticles made of different materials. The high production rates achieved (tens of g/day) for this kind of gas aggregation sources, and the inherent ability to control the structure of the nanoparticles in a controlled environment, make this equipment appealing for industrial purposes, a highly coveted aspect since the introduction of this type of sources. Furthermore, our innovative UHV experimental station also includes in-flight manipulation and processing capabilities by annealing, acceleration, or interaction with background gases along with in-situ characterization of the clusters and nanoparticles fabricated. As an example to demonstrate some of the capabilities of this new equipment, herein we present the fabrication of copper nanoparticles and their processing, including the controlled oxidation (from Cu to CuO through CuO, and their mixtures) at different stages in the machine., This work was supported by the European Union [grant number ERC-2013-SyG 610256 NANOCOSMOS]; the Spanish MINECO [grant numbers MAT2017-85089-C2-1-R, MAT2014-54231-C4-1-P, MAT2014-54231- C4-4-P, MAT2014-59772-C2-2-P, FIS2016-77578-R, FIS2013-48087-C2-1P, FIS2016-77726-C3-1P and CSIC13-4E-1775]., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergic antibacterial coatings combining titanium nanocolumns and tellurium nanorods

  • Medina Cruz, David
  • González Sagardoy, María Ujué
  • Tien-Street, William
  • Fernández Castro, Marcial
  • Vernet Crua, Ada
  • Fernández-Martínez, Iván
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Webster, Thomas J.
  • García-Martín, José Miguel
Anocolumnar titanium coatings have been fabricated in two sputtering systems with very different characteristics (a laboratory setup and semi-industrial equipment), thus possessing different morphologies (150 nm long columns tilted 20° from the normal and 300 nm long ones tilted 40°, respectively). These coatings exhibit similar antibacterial properties against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacteria. When a synergic route is followed and these coatings are functionalized with tellurium (Te) nanorods, the antibacterial properties are enhanced, especially for the long nanocolumns case. The biocompatibility is preserved in all the nanostructured coatings., Funding from MINECO (MAT2014-59772-C2-1-P, MAT2014-59772-C2-2-P and MAT2011-29194-C02-02) and Fundación Domingo Martínez is acknowledged. J.M. G.-M. thanks MECD (PRX16/00383) and Fulbright Commission for his stay at Northeastern University. We also acknowledge the service from the MiNa Laboratory at IMN funded by CM (S2013/ICE2822), MINECO (CSIC13-4E-1794) and the EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the size, composition and structure of Au and Co50Au50 nanoparticles by high-power impulse magnetron sputtering in gas-phase synthesis

  • Mayoral, Álvaro
  • Martínez Orellana, Lidia
  • García-Martín, José Miguel
  • Fernández-Martínez, I.
  • García-Hernández, Mar
  • Galiana, Beatriz
  • Ballesteros Pérez, Carmen Inés
  • Huttel, Yves
Gas-phase synthesis of nanoparticles with different structural and chemical distribution is reported using a circular magnetron sputtering in an ion cluster source by applying high-power impulses. The influence of the pulse characteristics on the final deposit was evaluated on Au nanoparticles. The results have been compared with the more common direct current approach. In addition, it is shown for the first time that high-power impulses in magnetron based gas aggregation sources allows the growth of binary nanoparticles, CoAu in this case, with a variety of crystalline and chemical arrangements which are analyzed at the atomic level., This work was supported by the EU agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies), Spanish Ministerio de Economía, Industria y Competitividad under project MAT2014-59772-C2-1-P, Spanish Ministerio de Economía, Industria y Competitividad under project MAT2014-59772-C2-2-P, Spanish Ministerio de Economía, Industria y Competitividad under project MAT2016-80394-R, ERC-2013-SyG 610256 NANOCOSMOS., National Science Foundation of China (21850410448), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dispersion and Functionalization of Nanoparticles synthesized by Gas Aggregation Source: Opening new Routes toward the Fabrication of Nanoparticles for Biomedicine

  • Oprea, B.
  • Martínez, L.
  • Román García, Elisa Leonor
  • Vanea, E.
  • Simon, S.
  • Huttel, Yves
The need to find new nanoparticles for biomedical applications is pushing the limits of the fabrication methods. New techniques with versatilities beyond the extended chemical routes can provide new insight in the field. In particular, gas aggregation sources offer the possibility to fabricate nanoparticles with controlled size, composition, and structure out of thermodynamics. In this context, the milestone is the optimization of the dispersion and functionalization processes of nanoparticles once fabricated by these routes as they are generated in the gas phase and deposited on substrates in vacuum or ultra-high vacuum conditions. In the present work we propose a fabrication route in ultra-high vacuum that is compatible with the subsequent dispersion and functionalization of nanoparticles in aqueous media and, which is more remarkable, in one single step. In particular, we will present the fabrication of nanoparticles with a sputter gas aggregation source using a FeB target and their further dispersion and functionalization with polyethyleneglycol (PEG). Characterization of these nanoparticles is carried out before and after PEG functionalization. During functionalization, significant boron dissolution occurs, which facilitates nanoparticle dispersion in the aqueous solution. The use of different complementary techniques allows us to prove the PEG attachment onto the surface of the nanoparticles, creating a shell to make them biocompatible. The result is the formation of nanoparticles with a structure mainly composed by a metallic Fe core and an iron oxide shell, surrounded by a second PEG shell dispersed in aqueous solution. Relaxivity measurements of these PEG-functionalized nanoparticles assessed their effectiveness as contrast agents for magnetic resonance imaging (MRI) analysis. Therefore, this new fabrication route is a reliable alternative for the synthesis of nanoparticles for biomedicine., This work was supported by the European ERC-2013-SyG 610256 NANOCOSMOS and FET Graphene Flagship and by the Spanish Ministerio de Ciencia e Innovación under projects MAT2014-59772-C2-2-P, MAT2011-29194-C02-02, and CSD2007-00041 (NANOSELECT). B.O. acknowledges financial support from the Sectorial Operational Program for Human Resources Development 2007-2013, cofinanced by the European Social Fund, under project no. POSDRU/107/1.5/S/76841 with the title “Modern Doctoral Studies: Internationalization and Interdisciplinary”. L.M. and E.R. acknowledge the Consejo Superior de Investigaciones Científicas (PIE 201160E085). Dr. L. Gutierrez is gratefully acknowledged for critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Citric juice-mediated synthesis of tellurium nanoparticles with antimicrobial and anticancer properties

  • Medina Cruz, David
  • Tien-Street, William
  • Zhang, Bohan
  • Huang, Xinjing
  • Vernet Crua, Ada
  • Nieto-Argüello, Alfonso
  • Cholula-Díaz, Jorge L.
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Webster, Thomas J.
Bacterial infections and cancer are two of the most significant concerns that the current healthcare system should tackle nowadays. Green nanotechnology is presented as a feasible solution that is able to produce materials with significant anticancer and antibacterial activity, while overcoming the main limitations of traditional synthesis. In the present work, orange, lemon and lime extracts were used as both reducing and capping agents for the green synthesis of tellurium nanoparticles (TeNPs) using a microwave-assisted reaction. TeNPs showed a uniform size distribution, and rod- and cubic-shapes, and were extensively characterized in terms of morphology, structure and composition using TEM, SEM, XPS, XRD, FTIR and EDX analysis. TeNPs showed an important antibacterial activity against both Gram-negative and -positive bacteria in a range concentrations from 5 to 50 μg mL−1 over a 24-hour time period. Besides, nanoparticles showed an anticancer effect towards human melanoma cells over 48 hours at concentrations up to 50 μg mL−1. Moreover, the Te nanostructures showed no significant cytotoxic effect towards human dermal fibroblast at concentrations up to 50 μg mL−1. Therefore, we present an environmentally-friendly and cost-effective synthesis of TeNPs using only fruit juices and showing enhanced and desirable biomedical properties towards both infectious diseases and cancer., This work was supported by the Chemical Engineering Department at Northeastern University. Funding from MINECO (MAT2014-59772-C2-1-P and MAT2014-59772-C2-2-P) and the European Union [grant number ERC-2013-SyG 610256 NANOCOSMOS] is acknowledged. We also acknowledge the service from the MiNa Laboratory at IMN funded by CM (S2013/ICE2822), MINECO (CSIC13-4E-1794) and the EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces

  • Aceituno Bueno, Rebeca
  • Marciello, Marzia
  • Moreno, Miguel
  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Martínez Orellana, Lidia
  • Prats Alfonso, Elisabet
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Villa, Rosa
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Huttel, Yves
  • Morales, María Del Puerto
  • Briones, Carlos
  • López, María Francisca
  • Ellis, Gary James
  • Vázquez Burgos, Luis
  • Martín-Gago, José A.
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S–metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed., This work was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 696656 (Graphene Flagship-core 1) and no 785219 (Graphene Flagship −core 2); UE FP7 ideas: ERC (grant ERC-2013-SYG-610256 Nanocosmos) and Spanish MINECO grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2017-85089-C2-1-R, MAT2014-59772-C2-2-P, and BIO2016-79618-R (funded by EU under the FEDER programme), as well as the Nanoavansens program from the Community of Madrid (S2013/MIT-3029). This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MINECO and also the ICTS NANBIOSIS, more specifically the Micro-Nano Technology Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the IMB-CNM. We are grateful to Matthias Muntwiler for his assistance with experiments in the PEARL beamline in the SLS facility. Finally, we acknowledge the TEM and ICP services at the CNB and ICMM institutes, respectively. CSS acknowledges the MINECO for a Juan de la Cierva Incorporación grant (IJCI-2014-19291). M. Marciello is grateful to the Comunidad de Madrid (CM) and European Social Fund (ESF) for supporting her research work through the I+D Collaborative Programme in Biomedicine NIETO-CM (B2017-BMD3731)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photo-Induced Self-Cleaning and Wettability in TiO2 Nanocolumn Arrays Obtained by Glancing-Angle Deposition with Sputtering

  • Fresno, Fernando
  • González Sagardoy, María Ujué
  • Martínez Orellana, Lidia
  • Fernández Castro, Marcial
  • Barawi, Mariam
  • Villar-García, Ignacio J.
  • Soler-Morala, Jimena
  • Reñones, Patricia
  • Luna, Mónica
  • Huttel, Yves
  • Peña O'Shea, Víctor A. de la
  • García-Martín, José Miguel
In this work, the preparation of regular nanosized columnar structures of titanium dioxide by means of glancing angle deposition with magnetron sputtering (MS-GLAD) followed by thermal annealing is reported. MS-GLAD gives rise to metallic titanium columnar structures with regular width and length that after thermal treatment are fully oxidized to form TiO2 nanocolumns that maintain the morphological features of the original metallic ones. Further functionalization with gold by means of multiple ion cluster source results in well-dispersed Au nanoparticles across the nanocolumns’ surface with a narrow size distribution centered at ca. 8.5 nm. The obtained nanostructures show photocatalytic self-cleaning activity as shown by the elimination of an organic layer deposited on their surface and the detection of hydroxyl radicals. Photoelectrochemical measurements show a better charge separation at the Au/TiO2 interface. In addition, wettability studies show that the degree of hydrophobicity of the surface is increased by the presence of nanocolumns, both in the dark and under UV illumination. This behavior is not modified by the presence of Au nanoparticles on the surface. The obtained results open up interesting implications in the tunability of the properties of nanostructured thin films for this kind of photo-activated application., Financial support from the Spanish Ministry of Science, Innovation, and Universities (MICINN) through the projects SOLPAC (ENE2017-89170-R, MCIU/AEI/FEDER, EU), MAT2014-59772-C2-1-P, and MAT2014-59772-C2-2-P is gratefully acknowledged. The authors also acknowledge the service from the MiNa Laboratory at IMN funded by Comunidad de Madrid (S2018/NMT-4291 TEC2SPACE), MICINN (CSIC13-4E-1794), and the EU (FEDER, FSE). Also, this work has been funded by the regional government of Madrid and European Structural Funds through their financial support to FotoArt-CM program (S2018/NMT-4367), and from Fundación Ramon Areces though the ArtLeaf project. M.B. thanks MICINN for a Juan de la Cierva Incorporación (IJC2019-042430-I) grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoinduced Charge Transfer and Trapping on Single Gold Metal Nanoparticles on TiO2

  • Luna, Mónica
  • Barawi, Mariam
  • Gómez-Moñivas, Sacha
  • Colchero, Jaime
  • Rodríguez-Peña, Micaela
  • Yang, Shanshan
  • Zhao, Xiao
  • Lu, Yi-Hsien
  • Chintala, Ravi
  • Reñones, Patricia
  • Altoe, Virginia
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Kawasaki, Seiji
  • Weber-Bargioni, Alexander
  • Peña O'Shea, Víctor A. de la
  • Yang, Peidong
  • Ashby, Paul D.
  • Salmerón, Miquel
We present a study of the effect of gold nanoparticles (Au NPs) on TiO2 on charge generation and trapping during illumination with photons of energy larger than the substrate band gap. We used a novel characterization technique, photoassisted Kelvin probe force microscopy, to study the process at the single Au NP level. We found that the photoinduced electron transfer from TiO2 to the Au NP increases logarithmically with light intensity due to the combined contribution of electron-hole pair generation in the space charge region in the TiO2-air interface and in the metal-semiconductor junction. Our measurements on single particles provide direct evidence for electron trapping that hinders electron-hole recombination, a key factor in the enhancement of photo(electro)catalytic activity., This work was supported by the Office of Basic Energy Sciences (BES) of the U.S. Department of Energy (DOE) under contract DE-AC02-05CH11231 through the Structure and Dynamics of Materials Interfaces Program (FWP KC31SM) and the Molecular Foundry. M.L. acknowledges funds from Comunidad de Madrid (P2018/EMT-4308), a Fulbright grant PRX16/00564, and the MCIU-AEI-FEDERUE (RTI2018-096937-B-C22 and MAT2014-59772-C2-1-P). J.C. acknowledges financial support from Ministerio de Ciencia e Innovación (MICINN) and the European Union through the project PID2019-104272RB-C52. Also, Y.H. acknowledges financial support from MCIU through MAT2014-59772-C2-2- P and L.M. from EC through ERC-2013-SYG-610256. V.A.P.O. and M.B. acknowledge the financial support from EC through ERC CoG HyMAP 648319, MINECO PID2019- 106315RB-I00 and ENE2017-89170-R, ″Comunidad de Madrid″ and European Structural Funds (FotoArt-CM project S2018/NMT-4367) and Fundación Ramón Areces (Art-Leaf project). M.B. also thanks the Juan de la Cierva Incorporación contract (IJC2019042430-I). X.Z. was supported by the NSF-BSF 359 grant number 1906014. The authors thank Prof. Eran Edri, María Ujué González Sagardoy, and Judit Meseguer- Oliver for fruitful discussions and Asylum customer support for help with modifications of the AFM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Core-satellite gold nanoparticle complexes grown by inert gas-phase condensation

  • Zhao, Junlei
  • Mayoral, Álvaro
  • Martínez Orellana, Lidia
  • Johansson, Mikael P.
  • Djurabekova, Flyura
  • Huttel, Yves
Spontaneous growth of complexes consisted of a number of individual nanoparticles in a controlled manner, particularly in demanding environments of gas-phase synthesis, is a fascinating opportunity for numerous potential applications. Here, we report the formation of such core–satellite gold nanoparticle structures grown by magnetron sputtering inert gas condensation. Combining high-resolution scanning transmission electron microscopy and computational simulations, we reveal the adhesive and screening role of H2O molecules in formation of stable complexes consisted of one nanoparticle surrounded by smaller satellites. A single layer of H2O molecules, condensed between large and small gold nanoparticles, stabilizes positioning of nanoparticles with respect to one another during milliseconds of the synthesis time. The lack of isolated small gold nanoparticles on the substrate is explained by Brownian motion that is significantly broader for small-size particles. It is inferred that H2O as an admixture in the inert gas condensation opens up possibilities of controlling the final configuration of the different noble metal nanoparticles., Computational research performed at the University of Helsinki was supported by the EU project M4F (project ID: 755039), the Academy of Finland (projects 289179 and 319453), and Waldemar von Frenckells sitftelse. The Finnish IT Center for Science (CSC), the Finnish Grid and Cloud Infrastructure (urn:nbn:fi:research-infras-2016072533) provided computational resources. The computational work was also supported by Center for Computational Science and Engineering at Southern University of Science and Technology. The experimental work was supported by the Spanish Ministerio de Ciencia e Innovación under project no. MAT2014-59772-C2-2-P and by the European ERC-2013-SyG 610256 grant. A.M. acknowledges the Center of High-resolution Electron Microscopy, CℏEM, supported by SPST of ShanghaiTech University under contract no. EM02161943 and the Natural National Science Foundation of China (NSFC) NSFC-21850410448 and NSFC-21835002. A.M. also acknowledges the Spanish Ministry of Science under the Ramon y Cajal Program (RYC2018-024561-I)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tuning the size, composition and structure of Au and Co50Au50 Nanoparticles by High-Power Impulse Magnetron Sputtering in gas-phase Synthesis

  • Mayoral, A.
  • Martinez, L.
  • García-Martín, J. M.
  • Fernández-Martínez, I.
  • García-Hernández, M.
  • Galiana, B.
  • Ballesteros, C.
  • Huttel, Y.
Gas-phase synthesis of nanoparticles with different structural and chemical distribution is reported using a circular magnetron sputtering in an ion cluster source by applying high-power impulses. The influence of the pulse characteristics on the final deposit was evaluated on Au nanoparticles. The results have been compared with the more common direct current approach. In addition, it is shown for the first time that high-power impulses in magnetron based gas aggregation sources allows the growth of binary nanoparticles, CoAu in this case, with a variety of crystalline and chemical arrangements which are analyzed at the atomic level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Core-Satellite Gold Nanoparticle Complexes Grown by Inert Gas-Phase Condensation

  • Zhao, J.
  • Mayoral, A.
  • Martínez, L.
  • Johansson, M.P.
  • Djurabekova, F.
  • Huttel, Y.
Spontaneous growth of complexes consisted of a number of individual nanoparticles in a controlled manner, particularly in demanding environments of gas-phase synthesis, is a fascinating opportunity for numerous potential applications. Here, we report the formation of such core-satellite gold nanoparticle structures grown by magnetron sputtering inert gas condensation. Combining high-resolution scanning transmission electron microscopy and computational simulations, we reveal the adhesive and screening role of H2O molecules in formation of stable complexes consisted of one nanoparticle surrounded by smaller satellites. A single layer of H2O molecules, condensed between large and small gold nanoparticles, stabilizes positioning of nanoparticles with respect to one another during milliseconds of the synthesis time. The lack of isolated small gold nanoparticles on the substrate is explained by Brownian motion that is significantly broader for small-size particles. It is inferred that H2O as an admixture in the inert gas condensation opens up possibilities of controlling the final configuration of the different noble metal nanoparticles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces

  • Bueno, Rebeca
  • Marciello, Marzia
  • Moreno, Miguel
  • Sánchez Sánchez, Carlos|||0000-0001-8644-3766
  • Martínez, José I.
  • Martínez, Lidia
  • Prats Alfonso, Elisabet|||0000-0002-7320-1896
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Villa, Rosa|||0000-0003-2735-3204
  • Mompean, Federico
  • Garcia-Hernandez, Mar|||0000-0002-5987-0647
  • Huttel, Yves
  • Morales, María del Puerto|||0000-0002-7290-7029
  • Briones Llorente, Carlos|||0000-0003-2213-8353
  • López, María F.
  • Ellis, Gary J.
  • Vázquez, Luis
  • Martin-Gago, Jose Angel|||0000-0003-2663-491X
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S-metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed.