Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Amine-functionalized mesoporous silica: A material capable of CO2 adsorption and fast regeneration by microwave heating

  • Nigar, Hakan
  • García-Baños, Beatriz
  • Mallada, Reyes
  • Santamaria, Jesus
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
The surface of ordered mesoporous (MCM-48) silica has been subjected to covalent grafting with silane molecules containing one to three amino groups. The dielectric properties of the materials were studied in detail, and the functionalized materials were used for CO2 adsorption at room temperature, followed by regeneration under either conventional heating or microwave irradiation. It has been found that, as the intensity of functionalization with amino groups increases (from mono- to tri-amino silanes) both the CO2 load and the dielectric response at microwave frequencies increase. In particular, functionalization with a tri-amino silane derivative gave the highest CO2 adsorption and the fastest microwave heating, resulting in a fourfold acceleration of adsorbent regeneration. The grafted material was fully stable for at least 20 adsorption-regeneration cycles, making it an ideal candidate for microwave-swing adsorption (MWSA) processes. (c) 2015 American Institute of Chemical Engineers AIChE J, 62: 547-555, 2016, Financial support from the European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. Hakan Nigar also acknowledges financial support from the Spanish Ministry of Education for the FPU grant (Formacion del Profesorado Universitario-FPU12/06864).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magneto-plasmonic nanoparticles as theranostic platforms for magnetic resonance imaging, drug delivery and NIR hyperthermia applications

  • Marquina, Clara
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Ricote, J.
et al., PEGylated magneto-plasmonic nanoparticles with a hollow or semi-hollow interior have been successfully synthesized and their physico-chemical characteristics have been investigated. The hollow interior space can be used to store drugs or other molecules of interest whereas magnetic characterization shows their potential as contrast agents in magnetic resonance imaging (MRI) applications. In addition, their plasmonic characteristics in the near infrared (NIR) region make them efficient in photothermal applications producing high temperature gradients after short irradiation times. We show that by controlling the etching conditions the inner silica shell can be selectively dissolved to achieve a hollow or semi-hollow interior without compromising the magnetic or plasmonic characteristics of the resulting nanoparticles. Magnetic measurements and transmission electron microscopy observations have been used to demonstrate the precise control during the etching process and to select an optimal concentration of the etching reagent and contact time to preserve the inner superparamagnetic iron oxide-based nanoparticles and the plasmonic properties of the constructs. Drug loading capabilities were also evaluated for both semi-hollow and as-synthesized nanoparticles using Rhodamine B isothiocyanate as a model compound. The nanoparticles produced could be potentially used as >theranostic> nanoparticles with both imaging capabilities and a dual therapeutic function (drug delivery and hyperthermia). This journal is © the Partner Organisations 2014., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the MAT2011-24988 grant. The ERC (Advanced Grant HECTOR) and People Program (Marie Curie Actions) of the EU under the REA grant agreement no. 321642 are also gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Escaping undesired gas-phase chemistry: Microwave-driven selectivity enhancement in heterogeneous catalytic reactors

  • Ramírez, Adrian
  • Hueso, José L.
  • Abian, Olga
  • Alzueta, M.U.
  • Mallada, Reyes
  • Santamaría, Jesús
Research in solid-gas heterogeneous catalytic processes is typically aimed toward optimization of catalyst composition to achieve a higher conversion and, especially, a higher selectivity. However, even with the most selective catalysts, an upper limit is found: Above a certain temperature, gas-phase reactions become important and their effects cannot be neglected. Here, we apply a microwave field to a catalyst-support ensemble capable of direct microwave heating (MWH). We have taken extra precautions to ensure that (i) the solid phase is free from significant hot spots and (ii) an accurate estimation of both solid and gas temperatures is obtained. MWH allows operating with a catalyst that is significantly hotter than the surrounding gas, achieving a high conversion on the catalyst while reducing undesired homogeneous reactions. We demonstrate the concept with the CO 2 -mediated oxidative dehydrogenation of isobutane, but it can be applied to any system with significant undesired homogeneous contributions., Financial support from the European Research Council Advanced Grant (HECTOR267626), the Regional Government of Aragon (DGA), and the MINECO and FEDER (project CTQ2015-65226) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green synthesis of a Cu/SiO2 catalyst for efficient H2-SCR of NO

  • Gioria, Esteban
  • Albana Marchesini, F.
  • Soldati, Analía
  • Giorello, Antonella
  • Hueso, José L.
  • Gutierrez, Laura
This article belongs to the Special Issue Metal-Oxide Nanostructures: From Photocatalysis to Energy., In this work, the synthesis of Cu/SiO2 catalysts starting from pre-formed copper nanoparticle (CuNP) colloidal suspensions was carried out. Two different protocols for the CuNP synthesis were tested: (i) a green approach using water as solvent and ascorbic acid as reducer and stabilizing agent, and (ii) a second solvothermal method involving the use of diethylene glycol as solvent, sodium hypophosphite (NaH2PO2) as reducer, and polyvinylpyrrolidone (PVP) and cetyltrimethylammonium bromide (CTAB) as stabilizing agents. In addition, and for the sake of comparison, a third catalyst was prepared by solid state conventional grinding of CuO with SiO2. The catalysts were tested in the environmentally relevant catalytic reduction of NOX with H2, in a temperature range from 300 to 500 °C. The catalysts were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR) cycles, Raman spectroscopy, and N2 adsorption for specific surface BET measurements. From these techniques CuO and Cu(0) species were detected depending on the synthesis protocol. CuNP size and size distribution in the colloid suspensions were determined by transmission electronic microscopy (TEM). The catalyst prepared from the aqueous suspension (CuAsc/SiO2) exhibited higher NO conversion (100%) and selectivity (85%) toward N2 at the lower reaction evaluated temperature (300 °C). The CuCTAB/SiO2 catalyst obtained by the solvothermal approach showed activity at high reaction temperature (400 °C) preferentially. The metal–support mechanical mixture exhibited a negligible response at low temperature and low conversion (68%) and selectivity (88%) at 500 °C. Nanoparticle size and distribution on the support, together with the metal–support interaction, were postulated as the most plausible parameters governing the catalytic performance of the different Cu/SiO2 materials., The authors wish to acknowledge the financial support received from ANPCyT (PICT/16-2284), CONICET (PIP/14-406), and UNL (CAID+D-2016-50420150100037LI), and to the Agencia Santafesina de Ciencia, Tecnología e Innovación (ASACTEI 2010-038-16, Res 121/16). Esteban Gioria also wants to thank the Santa Fe Bank Foundation for the partial financing of this work within the student grant “Technological Innovation 2014”. Part of this work was funded by Gobierno de Aragón (T57_17R p) and cofunded by Feder 2014–2020 “Construyendo Europa desde Aragón”. Financial support from the European Research Council Advanced Grant (HECTOR-267626), the Spanish Government (MINECO-PRI-PIBAR-2011-1366), and the Regional Government of Aragon (DGA) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Numerical analysis of microwave heating cavity: Combining electromagnetic energy, heat transfer and fluid dynamics for a NaY zeolite fixed-bed

  • Nigar, H.
  • Sturm, G.S.J.
  • García-Baños, Beatriz
  • Peñaranda Foix, Felipe Laureano
  • Catalá-Civera, José M.
  • Mallada, Reyes
  • Stankiewicz, A.
  • Ricote, J.
Three-dimensional mathematical model was developed for a rectangular TE10n microwave heating cavity system, working at 2.45 GHz. Energy/heat, momentum equations were solved together with Maxwell’s electromagnetic field equations using Comsol Multiphysics® simulation environment. The dielectric properties, ε' and ε'', of NaY zeolite (Si/Al = 2.5) were evaluated as a function of temperature. Considering these values, the microwave heating of a porous fixed-bed made of dry NaY zeolite was simulated. Electric field distribution, axial and radial temperature profiles and temperature evolution with time were obtained. The zeolite fixed bed was heated up to 180 °C in 5 min, with 30 W power. The fixed-bed temperature evolution under non-steady state conditions showed the same trend as the one observed experimentally with only an average deviation of 10.3%. The model was used to predict microwave heating of other materials improving energy efficiency of the microwave cavity. Furthermore, the developed model was able to predict thermal runaway for zeolites., Financial support from the European Research Council ERC-Advanced Grant HECTOR-267626 is gratefully acknowledged. Hakan Nigar acknowledges financial support from the Spanish Ministry of Education for the FPU grant (Formación del Profesorado Universitario – FPU12/06864), and also for the academic short stay grant (Estancia Breve – FPU2016) at the Delft University of Technology, Delft, The Netherlands., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Upconverting carbon nanodots from ethylenediaminetetraacetic acid (EDTA) as near‐infrared activated phototheranostic agents

  • Ortega-Liébana, M. Carmen
  • Encabo-Berzosa, M. Mar
  • Casanova, Álvaro
  • Pereboom, Desirée
  • Alda, Octavio
  • Hueso, José L.
  • Santamaría, Jesús
This work describes the synthesis of nitrogen‐doped carbon nanodots (CNDs) synthesized from ethylenediaminetetraacetic acid (EDTA) as a precursor and their application as luminescent agents with a dual‐mode theranostic role as near‐infrared (NIR) triggered imaging and photodynamic therapy agents. Interestingly, these fluorescent CNDs are more rapidly and selectively internalized by tumor cells and exhibit very limited cytotoxicity until remotely activated with a NIR illumination source. These CNDs are excellent candidates for phototheranostic purposes, for example, simultaneous imaging and therapy can be carried out on cancer cells by using their luminescent properties and the in situ generation of reactive oxidative species (ROS) upon excitation in the NIR range. In the presence of CNDs, NIR remote activation induces the in vitro killing of U251MG cells. Through the use of flow imaging cytometry, we have been able to successfully map and quantify the different types of cell deaths induced by the presence of intracellular superoxide anions (.O2−) and hydrogen peroxide (H2O2) ROS generated in situ upon NIR irradiation., The authors acknowledge the European Research Council for funding through an advanced grant research project (HECTOR grant number 267626; CADENCE grant number 742684) and a CIG‐Marie Curie Reintegration Grant (NANOLIGHT REA grant number 294094). M.C.O. acknowledges the Spanish Government for a FPU predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave-activated structured reactors to maximize propylene selectivity in the oxidative dehydrogenation of propane

  • Ramírez, Adrian
  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave (MW) heating has been applied to increase the selectivity to propylene in the oxidative dehydrogenation (ODH) of propane. The preferential heating of the solid monolith (made of SiC, a good microwave susceptor), allows working with a lower gas phase temperature, reducing the formation of undesired by-products in the gas phase via homogeneous reactions. Conversion levels of ~ 21% and selectivity to propylene up to 70% have been achieved with MW-heated straight channel monolithic reactors coated with a VMgO catalyst. These competitive values contrast with the more limited performance delivered by the same catalytic system when it is subjected to conventional heating in a fixed-bed reactor configuration, thereby corroborating the advantage of working under a significant gas–solid temperature gap to minimize the extent of homogeneous reactions., Financial support from the European Research Council (ERC Advanced Grant HECTOR-267626) and the Regional Government of Aragon (DGA) is gratefully acknowledged. The CIBER-BBN (initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the key factors in the chlorine-promoted epoxidation of ethylene over a silver-copper oxide nanocatalyst

  • Urbiztondo, Miguel A.
  • Ramírez, Adrian
  • Hueso, José L.
  • Santamaría, Jesús
  • Ruiz-Salvador, A. Rabdel
  • Hamad, Said
Ethylene oxide is one of the most important raw materials in the chemical industry, with an annual production close to 35 million metric tons. Despite its importance, to date, no metal has been found that can compete with the original silver bulk material catalyst discovered in 1931. Recently, a few copper and copper–silver based nanostructures have demonstrated remarkable selectivity and activity, especially when coupled with an industrial chlorine promoter. The present work evaluates the mechanistic role of chlorine as an active promoter of the selective oxidation of ethylene to ethylene oxide in the presence of a silver–copper oxide hybrid nanocatalyst (AgCuO). Experimental kinetic studies combined with density functional theory (DFT) calculations provide insight into the influence that Ag/CuO-supported chlorine atoms have over the ethylene epoxidation reaction. Remarkably, the typically described indirect route via the formation of an oxametallacycle (OMC) is also accompanied by a direct route. Furthermore, the presence of chlorine seems to facilitate a more favorable adsorption energy for ethylene oxide (EO) than for acetaldehyde (AA), the main reaction by-product. As a result, complete oxidation of EO can be further prevented in the presence of this AgCuO hybrid heteronanostructure., We acknowledge financial support from the European Research Council ERC-Advanced Grant HECTOR (project number 267626) is gratefully acknowledged. The computations were performed on resources provided by the supercomputer “Caesaraugusta” (node of the Spanish Supercomputer Network) provided by BIFI (Universidad de Zaragoza). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. S.H. acknowledges funding from the Agencia Estatal de Investigación and the Ministerio de Ciencia, Innovación y Universidades, of Spain (PID2019-110430G B-C22), and from the EU FEDER Framework 2014-2020 and Consejería de Conocimiento, Investigación y Universidad of the Andalusian Government (FEDER-UPO-1265695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas-solid contactors and catalytic reactors with direct microwave heating: Current status and perspectives

  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave heating (MWH) transforms energy from an electromagnetic wave to heat. In contrast to conventional heating (CH) mechanisms that use slower heat transfer processes via conduction, convection or radiation, microwaves (MW) directly interact with MW susceptor materials and induce a rapid conversion of the electromagnetic energy into heat. This rapid heating provides MWH with distinct features that can be leveraged to increase conversion, selectivity and/or energy efficiency of chemical processes. Here we discuss recent significant advances reported in MWH processes involving gas-solid interactions. Special attention is devoted to key aspects such as the methodologies to accurately determine local temperatures under the influence of electromagnetic (EM). Other relevant aspects such as the consideration of the solid catalyst dielectric properties or the design of novel gas-solid contactor configurations will be discussed. Emerging aspects such as the potential of MWH to minimize secondary by-products in high temperature reactions or to efficiently perform in transient processes, e.g. adsorption-desorption cycles, are highlighted. Finally, current challenges and perspectives towards a wide application of MWH in gas solid contactors will be critically discussed., Financial support from the European Research Council Advanced Grant (HECTOR-267626) and the Regional Government of Aragon (DGA) is gratefully acknowledged. Financial support from the European Union’s Horizon 2020 Research and Innovation Programme (ADREM project – Grant Agreement No. 680777) is also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Amine-functionalized mesoporous silica: A material capable of CO2 adsorption and fast regeneration by microwave heating

  • Nigar, Hakan
  • Garcia-Baños, Beatriz
  • Peñaranda-Foix, Felipe L.
  • Catalá-Civera, José M.
  • Mallada, Reyes
  • Santamaría, Jesús
The surface of ordered mesoporous (MCM-48) silica has been subjected to covalent grafting with silane molecules containing one to three amino groups. The dielectric properties of the materials were studied in detail, and the functionalized materials were used for CO2 adsorption at room temperature, followed by regeneration under either conventional heating or microwave irradiation. It has been found that, as the intensity of functionalization with amino groups increases (from mono- to tri-amino silanes) both the CO2 load and the dielectric response at microwave frequencies increase. In particular, functionalization with a tri-amino silane derivative gave the highest CO2 adsorption and the fastest microwave heating, resulting in a fourfold acceleration of adsorbent regeneration. The grafted material was fully stable for at least 20 adsorption-regeneration cycles, making it an ideal candidate for microwave-swing adsorption (MWSA) processes., Financial support from the European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. Hakan Nigar also acknowledges financial support from the Spanish Ministry of Education for the FPU grant (Formación del Profesorado Universitario—FPU12/06864)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A nanoarchitecture based on silver and copper oxide with an exceptional response in the chlorine-promoted epoxidation of ethylene

  • Ramírez, Adrian
  • Hueso, José L.
  • Suárez, Hugo
  • Mallada, Reyes
  • Ibarra, Alfonso
  • Irusta, Silvia
  • Santamaría, Jesús
The selective oxidation of ethylene to ethylene epoxide is highly challenging as a result of competing reaction pathways leading to the deep oxidation of both ethylene and ethylene oxide. Herein we present a novel catalyst based on silver and copper oxide with an excellent response in the selective oxidation pathway towards ethylene epoxide. The catalyst is composed of different silver nanostructures dispersed on a tubular copper oxide matrix. This type of hybrid nanoarchitecture seems to facilitate the accommodation of chlorine promoters, leading to high yields at low reaction temperatures. The stability after the addition of chlorine promoters implies a substantial improvement over the industrial practice: a single pretreatment step at ambient pressure suffices in contrast with the common practice of continuously feeding organochlorinated precursors during the reaction., Financial support from the European Research Council ERC-Advanced Grant HECTOR (project number 267626) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun Au/CeO2 nanofibers: A highly accessible low-pressure drop catalyst for preferential CO oxidation

  • Moreno, Iván
  • Navascués, Nuria
  • Irusta, Silvia
  • Santamaría, Jesús
Au/CeO2 catalysts shaped as nanofibers were obtained by supporting Au nanoparticles (ca. 3 nm) on CeO2 nanofibers of around 200 nm diameter. The CeO2 support was prepared by calcining electrospun polymer nanocomposite fibers with a high Ce content; then gold nanoparticles were either synthesized in situ or deposited from a suspension. The prepared catalysts were used in the preferential oxidation of CO in a hydrogen-rich stream. The catalysts prepared by deposition of preformed gold nanoparticles were less stable and underwent sintering due to a weaker nanoparticle–support interaction. In contrast, the catalysts with Au nanoparticles synthesized in situ were active (90% conversion and 46% selectivity) and stable. The fiber-shaped catalyst was able to give maximum reactant access at a much lower pressure drop than catalyst in powder form., This research was supported by the European Research Council (ERC—Advanced Grant HECTOR) (267626). The microscopy was conducted at the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon—Universidad de Zaragoza. I.M. acknowledges support by the Aragon Government (B008/12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ethylene epoxidation in microwave heated structured reactors

  • Ramírez, Adrian
  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
In the present work we show the microwave-induced heating of monolithic reactors containing a thin-layered catalyst that exhibits a strong and selective heating susceptibility under microwave irradiation. The combination of microwave radiation and structured reactors has been successfully applied for the intensification of the selective oxidation of ethylene to ethylene oxide (epoxidation) while operating at lower power consumptions and with higher energy efficiencies than in conventional heating conditions. The microwave radiation selectively heats the catalyst and the monolith walls while maintaining a relatively colder gas stream thereby creating a gas/solid temperature gradient of up to ∼70 °C at a reaction temperature of 225 °C. Moreover, the influence of different parameters such as the distribution of the catalyst onto the structured monoliths or the temperature measurement techniques employed to determine the heating profiles (Optic Fibers and/or IR thermography) have been also thoroughly evaluated to justify the obtained catalytic results., Financial support from the European Research Council Advanced Grant (HECTOR- 267626) and the Regional Government of Aragon (DGA) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of gold-decorated halloysite nanotubes as plasmonic photocatalysts

  • Gomez, Leyre
  • Hueso, José L.
  • Ortega-Liébana, M. Carmen
  • Santamaría, Jesús
  • Cronin, Stephen B.
Herein we report on the synthesis of gold-decorated halloysite nanotubes (HNTs) and their evaluation as photocatalysts in the degradation of a model organic contaminant. The combination of photo-thermally-induced local heating and charge transfer mechanisms between the nanostructured gold surface and the organic molecule results in the observed dye decomposition. The use of an inexpensive natural clay support with suitable surface chemistry and adsorption properties represents an eco-friendly method for light-induced oxidation reactions carried out at ambient temperatures., This research was supported in part by National Science Foundation Award No. CBET-0854118. This work has been also supported thanks to the Spanish Ministry of Science and Innovation (MICINN) with the abroad research stay granted to LG (grant EEBB-I-13-06033). Financial support from MINECO (MAT2011-24988 grant, Spain), the European Research Council (ERC-Advanced Grant HECTOR) (267626) and CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged. The microscopy work was conducted at the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon—Universidad de Zaragoza. The authors acknowledge LMA-INA for offering access to their instruments and expertise. JLH acknowledges a Juan de la Cierva Postdoctoral Fellowship and a Marie Curie Reintegration Grant (CIG-NANOLIGHT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Extraordinary sensitizing effect of co-doped carbon nanodots derived from mate herb: Application to enhanced photocatalytic degradation of chlorinated wastewater compounds under visible light

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Arenal, Raúl
  • Irusta, Silvia
  • Yeung, King Lun
  • Santamaría, Jesús
The present work investigates the role of two types of carbon nanodots (CNDs) as novel sensitizers of TiO2 to create a visible-light driven photo-catalyst that is not only efficient for solar-driven pollution abatement, but also inexpensive, durable and environmentally-friendly. Two widely available green organic precursors, the Argentinean herb Mate and the Stevia plant have been selected as the carbogenic source to thermally induce the formation of different types of CNDs with different levels of N and P doping and tunable photoluminescence response in the UV–vis-near infrared (NIR) ranges. These CNDs have been successfully assembled with TiO2 to form heterogeneous photocatalysts that are highly active in the visible-light and NIR- driven photodegradation of 2,4-dichlorophenol (2,4-DCP), a persistent chlorinated organic compound present in numerous pesticide formulations., The authors acknowledge the European Research Council for funding through an advanced Grant research Project (HECTOR Grant number 267626) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA Grant number 294094). The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3). R.A. also gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)”. Catedra Samca and Government of Aragon are also acknowledged for financial support within the collaboration program established between the University of Zaragoza and the Hong Kong University of Science and Technology. Finally, M.C.O thanks the Spanish Ministerio de Economia y Competitividad for an FPU PhD research fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile synthesis of SiO 2-Au nanoshells in a three-stage microfluidic system

  • Gomez, Leyre
  • Arruebo, Manuel
  • Sebastián, Víctor
  • Gutiérrez, Laura
  • Santamaría, Jesús
The capacity to produce nanostructured materials with well-defined, specific properties in relatively large quantities is crucial for the viability of emerging nanotechnologies. Core–shell plasmonic structures, such as SiO2–Au nanoshells, are a type of nanomaterial where the control of morphological properties is especially important, given the strong dependence of the plasmon frequency on their characteristic dimensions. Here we present a simple, robust and scalable process to exploit the advantages of microfluidics to manufacture these sophisticated nanostructures. We show that the main sequential steps required to obtain SiO2–Au nanoshells can be carried out in a simple microfluidic system with significant savings in time and effort, and with an improved control over the product properties, compared to a conventional batch processing operation., This work has been supported thanks to the Spanish Ministry of Science and Innovation (MICINN) for the MAT2011-24988 grant. Funding from Fundación Ramón Areces (Spain) and from ERC Advanced Grant (ERC-AdG-Grant Agreement No 267626, HECTOR) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast microwave synthesis of Pt-MFI zeolite coatings on silicon micromonoliths: Application to VOC catalytic combustion

  • Marin, Ingrid
  • Urbiztondo, Miguel A.
  • Pina, María Pilar
  • Mallada, Reyes
  • Santamaría, Jesús
et al., This paper describes the preparation of a ZSM-5 zeolite layer onto conventional Si wafers and Si micromonoliths, by using microwave-assisted seeded hydrothermal synthesis. A homo-geneous ZSM-5 zeolite layer up to 680 nm was obtained over the external surface of a Si micromonolith (surface to volume ratio > 300,000 m -1 ) after only 4 min of hydrothermal synthe-sis at 453 K. As a proof of concept, the catalytic activity of the prepared ZSM-5 coated micromonoliths, after a conventional Pt ion-exchange process, was demonstrated in the combus-tion of traces of n-hexane (200 ppmV) in air., Financial support from Ministerio de Economia y Competitividad, Spain and ERC Advanced grant HECTOR are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gold-coated halloysite nanotubes as tunable plasmonic platforms

  • Zieba, Maciej
  • Hueso, José L.
  • Arruebo, Manuel
  • Martínez, Gema
  • Santamaría, Jesús
We propose the use of natural Halloysite Hollow Nanotubes (HNTs) as supports to generate plasmonic platforms with remotely triggered heating capacity. The chemical modification and subsequent coating with nanostructured gold either in the form of individually dispersed particles or by forming a shell with variable thickness and interconnectivity has been studied. The dielectric nature of the silica in conjunction with the plasmonic gold layer allows a flexible optical response with tunable maximum absorptions within the visible to Near-Infrared (NIR) range. The generation of hollow gold nanotubes using halloysite as a sacrificial template is also demonstrated., Financial support from MINECO (MAT2011-24988 grant, Spain) European Research Council (ERC-Advanced Grant HECTOR) and the CIBER-BBN (initiative funded by the VI National R+D+I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged. The microscopy work was conducted at the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. The authors acknowledge the LMA-INA for offering access to their instruments and expertise. JLH acknowledges a Juan de la Cierva Postdoctoral Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heating of zeolites under microwave irradiation: A density functional theory approach to the ion movements responsible of the dielectric loss in Na, K, and Ca A-zeolites

  • Gracia, José
  • Escuín, José M.
  • Mallada, Reyes
  • Navascués, Nuria
  • Santamaría, Jesús
We analyze the temperature increase in Linde Type A Na, K, and Ca mix zeolites under microwave radiation. Through the use of the density functional theory (DFT), we examine the movements of the most labile cations for dehydrated Na12, K12, and Na4Ca4 ideal A-zeolites. The kinetics of the ionic migration, responsible for dielectric heating, is described according to transition-state theory. For each composition, we find different relaxation processes caused by the jump of the most unbalanced cations to diverse metastable sites inside the Al–O–Si framework. The magnitudes of the calculated enthalpy barriers for the most probable jumps agree with the experiments and are inversely related to the heating rates. DFT calculations are an optimum approach to elucidate the cation migration in Zeolites, described by a thermally activated or Arrhenius-type process. We observe that the deposition of microwave energy drops significantly in the presence of Ca atoms independently of other cations., Financial support from the European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. We thank the Red Española de Supercomputación (RES) for granting us computational time at CAESARAUGUSTA in Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Usón, Laura
  • Hueso, José L.
  • Sebastián, Víctor
  • Arenal, Raúl
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaría, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction., Financial support from the MICINN through the MAT2011-24988 grant, the European Research Council (ERC-Advanced Grant-HECTOR, grant agreement 267626), People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642 and no. 294094) and the CIBER-BBN. These TEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative – I3). IF acknowledges financial support by the Agence Nationale de la Recherche (ANR) under Contract 756 ANR-BLAN-SIMI10-LS-100617-15-01. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Luminescent mesoporous nanorods as photocatalytic enzyme-like peroxidase surrogates

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Fernández-Pacheco, Rodrigo
  • Irusta, Silvia
  • Santamaría, Jesús
Herein we report on a novel inorganic peroxidase-mimicking nanocatalyst activated under blue LED photoirradiation. A novel flash-pyrolysis method has been developed for the generation of strong blue photoluminescence (PL) centers attributed to silicon and carbon-based sites within a mesoporous SBA-15 silica nanorod platform. The type of centers and their PL response can be controlled by varying the flash thermal treatment conditions. By tailoring the operating conditions the system can be driven towards the preferential generation of carbon-based luminescent centers, with or without the simultaneous generation of silicon-based centers. The properties and the nature of these luminescent centers within the mesoporous nanorods have been thoroughly corroborated by a battery of characterization techniques including fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) at the local level of the structures combined with scanning transmission electron microscopy (STEM) imaging. In addition, these luminescent mesoporous nanorods have been successfully tested as robust photocatalysts able to display peroxidase-like activity and indirect glucose sensing in a wider range of pH conditions compared to the natural enzyme, especially when carbogenic dots and oxygen-deficient silica centers are simultaneously present in the structure., The authors acknowledge the European Research Council for funding through an advanced grant research project (HECTOR grant number 267626; CADENCE grant number 742684) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA grant number 294094). The TEM measurements were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). M. C. O. acknowledges the Spanish Government for an FPU predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Magnetically-driven selective synthesis of Au clusters on Fe3O4 nanoparticles

  • Sebastián, Víctor
  • Calatayud, M. Pilar
  • Goya, Gerardo F.
  • Santamaría, Jesús
A novel procedure to direct the local synthesis of gold clusters on Fe3O4 nanocrystals by means of alternating magnetic fields (AMFs) is demonstrated. This process allows growing gold selectively onto the heated magnetite surface, while keeping the synthesis solution comparatively cold. Sequential AMF cycles allowed fine-tuning the amount of gold on the magnetite surfaces., Funding from MINECO (Spain) and from ERC Advanced Grant (ERC-AdG-267626, HECTOR) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave-assisted catalytic combustion for the efficient continuous cleaning of VOC-containing air streams

  • Nigar, Hakan
  • Julian, Ignacio
  • Mallada, Reyes
  • Santamaría, Jesús
A microwave-heated adsorbent-reactor system has been used for the continuous cleaning of air streams containing n-hexane at low concentrations. Both, a single catalytic bed (PtY zeolite) and a double (adsorptive DAY zeolite + catalytic PtY zeolite) fixed-bed reactor configurations were studied under dry and humid conditions. The zeolites were selectively heated by short periodic microwave pulses that caused the desorption of n-hexane and its subsequent catalytic combustion. The double bed configuration was attractive because it allowed nearly the same performance with only half of the catalyst load. The operation was especially efficient under realistic humid gas conditions that favored more intense microwave absorption, producing a faster heating of the adsorptive and catalytic beds. Under these conditions, continuous gas cleaning could be achieved with short (3 min, 30 W) microwave heating pulses every 5 min., Financial support from the European Research Council ERC-Advanced Grant HECTOR Project (ID:267626) is gratefully acknowledged. H.N. also acknowledges financial support from the Spanish Ministry of Education for the FPU grant (Formación del Profesorado Universitario, FPU12/06864)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulation of bactericidal action in polymer nanocomposites: Light-tuned Ag+ release from electrospun PMMA fibers

  • Moreno, Iván
  • Navascués, Nuria
  • Irusta, Silvia
  • Santamaría, Jesús
While silver is widely regarded as a potent antibacterial material, controlling the rate of release of the bactericidal agents (silver ions) remains a challenge. When silver nanoparticles are used as precursors, the release process involves oxidation and dissolution in the surrounding environment. Here we show that it is possible to tune the rate of silver release from polymer matrices containing silver precursors by a simple UV irradiation step. To demonstrate this, silver-containing polymer (PMMA) fibers have been produced by electrospinning, then subjected to different levels of exposure to UV radiation and fully characterized in terms of silver state, presence of nanoparticles, Ag+ release rates and bactericidal power. The as-spun fibers contained mainly silver as Ag+, while samples exposed to UV radiation displayed progressively higher proportions of Ag0 (XPS analysis). Nanoparticles consisting of metallic silver were present in UV-exposed samples, and their size increased with irradiation time. The Ag+ release rates (and the bactericidal action of the nanofibers) were found to directly depend on the degree of UV exposure: a fast Ag+ release was observed for non-irradiated samples, which during the release experiment delivered roughly three times as much silver than samples subjected to 24 h UV exposure., This research was supported by the European Research Council (ERC-Advanced Grant HECTOR) (267626). The microscopy work was conducted at the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon—Universidad de Zaragoza. I. M. acknowledges support by the Aragon Government (B008/12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nano-heaters: New insights on the outstanding deposition of dielectric energy on perovskite nanoparticles

  • Gracia, José
  • Escuín, José M.
  • Mallada, Reyes
  • Navascués, Nuria
  • Santamaría, Jesús
It has been experimentally observed that, in some Mott nanomaterials, outstanding dielectric losses may appear at microwave frequencies, leading to a rapid increase of temperature. This often takes place in association with the insulator to metal transition (IMT) in these materials. However, when other materials with a similar structure and composition are subjected to the same intensity of microwave (MW) irradiation, the observed heating is minimal. Here we show that the electron dynamics of these materials are responsible for their different heating behaviour. More specifically, for LaCoO3 perovskite nanoparticles, the spin shifts causing the IMT are also responsible for the observed heating behaviour. Under suitable conditions, the intense absorption of MW radiation leads to extremely high heating rates, above 600 degrees per second. The insight gained from this study has been used to design a directly heated catalytic system (LaCoO3 perovskite nanoparticles on a MW-transparent cordierite monolith) capable to operate under a stable, significant solid-gas temperature gradient., Financial support from the European Research Council Advanced Grant HECTOR is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nitrogen-doped luminescent carbon nanodots for optimal photo-generation of hydroxyl radicals and visible-light expanded photo-catalysis

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Yeung, King Lun
  • Santamaría, Jesús
Luminescent carbon nanodots (CNDs) have been obtained by hydrothermal processing of ascorbic acid (AA) and ethanolamine (EN). The resulting N-doped carbon nanostructures exhibit interesting and tunable emission capabilities with a dual behavior as down-converters and more importantly, as up-converting quantum dots. Herein, we also evaluate the optical response of these CNDs to selectively generate highly reactive oxidative hydroxyls (radical dotOH) upon irradiation with different light-emitting diodes (LEDs) in the visible–NIR range. Finally, the role of the N-doped CNDs as nano-sensitizers to maximize the solar light harvesting and expand the photo-catalytic response of a commonly used UV-active catalyst such as TiO2 was successfully tested in the degradation of an organo-chlorinated compound under visible light., People Program (CIG-Marie Curie Actions, REA grant agreement no. 294094-NANOLIGHT) and HECTOR Advanced Grant (267626) are gratefully acknowledged. Government of Aragon is also gratefully acknowledged for the financial support. The experiments have been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pumping metallic nanoparticles with spatial precision within magnetic mesoporous platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, Nuria
  • Martínez, Gema
  • Sebastián, Víctor
  • Malumbres, Ana
  • Florea, Ileana
  • Arenal, Raúl
  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Santamaría, Jesús
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle–wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes., Financial support from MINECO (Spain) and the CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon”—Universidad de Zaragoza. V.S. and J.L.H. acknowledge the support of the People Program (CIG-Marie Curie Actions, REA grant agreement nos. 321642 and 294094). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reaction engineering strategies for the production of inorganic nanomaterials

  • Sebastián, Víctor
  • Arruebo, Manuel
  • Santamaría, Jesús
The rapid expansion of nanotechnology requires scaled-up production rates to cope with increased nanomaterials demand. However, in many cases, the final uses of nanomaterials impose strict requisites on their physical and chemical characteristics including size, shape, chemical composition and type of functional groups on their surface. Frequently, additional features such as a limited degree of agglomeration are also demanded. These requisites represent a serious challenge to present-day synthesis methods when nanomaterials must be produced in large amounts. Some of the possible solutions from the reaction engineering perspective are discussed in this work for both gas and liquid phase production processes. Special attention will be devoted to enabling technologies, which allow the production of engineered nanoparticles with limited aggregation and with a good control on their nano-scale characteristics., Financial support from MINECO, Spain (MAT2011–24988 grant), People Program (CIG-Marie Curie Actions) of the EU under REA grant agreement n° Financial support from MINECO, Spain (MAT2011–24988 grant), People Program (CIG-Marie Curie Actions) of the EU under REA grant agreement n° 321642 and from ERC Advanced Grant (ERC-AdG-267626, HECTOR) is gratefully acknowledged.and from ERC Advanced Grant (ERC-AdG-267626, HECTOR) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Removal of VOCs at trace concentration levels from humid air by Microwave Swing Adsorption, kinetics and proper sorbent selection

  • Nigar, Hakan
  • Navascués, Nuria
  • Iglesia, Óscar de la
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave Swing Adsorption, MWSA, is already established as an alternative way of heating and regenerating solids efficiently in adsorption operations. When zeolites are used for MWSA applications it becomes necessary to tailor the zeolite properties towards microwave heating while at the same time aiming to obtain the highest adsorption capacity and selectivity. These objectives may in some cases be contradictory. In this paper the adsorption of binary mixtures of n-hexane (500 ppm) and water (15,000 ppm) in air, together with the regeneration of the sorbents using microwaves is studied for three commercial, faujasite Y type zeolites: NaY, HY and DAY. In the Henry regime for adsorption of low concentrations of n-hexane, the Na exchanged zeolite shows the higher affinity for the n-hexane. However, when the binary mixtures are considered DAY zeolite, with higher Si/Al ratio, is more selective towards the adsorption of the alkane. During microwave heating of zeolites, the water adsorbed, the mobile cations of the zeolite framework and the hydroxyl groups on the surface of the zeolite contribute to the absorption of microwave energy. Both heating and desorption are considerably faster using MW, compared to conventional heating. The DAY zeolite with a Si/Al = 40 has been found excellent candidate material for MWSA of n-hexane in binary mixtures with water, since it combines good adsorption capacity and efficient interaction with microwaves., Financial support from the European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. We thank Prof. Antonio Monzón for fruitful discussions about desorption kinetics. Hakan Nigar also acknowledges financial support from the Spanish Ministry of Education for the FPU grant (Formación del Profesorado Universitario – FPU12/06864)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scaled-up production of plasmonic nanoparticles using microfluidics: From metal precursors to functionalized and sterilized nanoparticles

  • Gomez, Leyre
  • Sebastián, Víctor
  • Irusta, Silvia
  • Ibarra, Alfonso
  • Arruebo, Manuel
  • Santamaría, Jesús
An exquisite control of synthesis parameters is generally required in nanomaterial synthesis to guarantee consistency in the essential characteristics such as size and shape. On the other hand, reliable scaled-up production of nanomaterials is required in order to achieve the production rates required for emerging nanotechnology applications while delivering a consistent product with the intended characteristics, avoiding the traditional batch-to-batch deviations. The continuous production of nanomaterials is challenging because of the difficulties involved in translating the complexity of nanomaterial synthesis into on-line operations. In this regard, microfluidic platforms stand out over conventional batch reactors due to their superior performance, easy scalability and reliability. Here, a continuous, scaled-up synthesis of high quality plasmonic hollow gold nanoparticles is reported for the first time. Not only was the throughput significantly higher than in a batch reactor, but also the microfluidic system allowed the on-line implementation of two new stages in nanomaterial production: surface functionalization and sterilization., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the MAT2011-24988 grant. The ERC (Advanced Grant HECTOR) and People Program (Marie Curie Actions) of the EU under the REA grant agreement no. 321642 are also gratefully acknowledged. A. I. acknowledges the Gobierno de Aragón (grants E81) and the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Arenal, Raúl
  • Santamaría, Jesús
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst., The (S)TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de, Spain. The authors acknowledge the European Research Council for funding through an advanced grant research project (HECTOR grant number 267626) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA grant number 294094). The syntheses of materials have been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative − I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742. M.C.O. also acknowledges the Spanish Government for the receipt of an FPU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasmall platinum nanoparticles on Fe3O4: A low-temperature catalyst for the preferential oxidation reaction

  • López, Angela
  • Larrea, Ane
  • Sebastián, Víctor
  • Calatayud, M. Pilar
  • Irusta, Silvia
  • Santamaría, Jesús
Preferential oxidation (PROX) of CO in H2-rich stream is critical to the production of clean H2 for H2-based fuel cells. A low-temperature fuel-cell start up is desirable for transportation applications. However, few catalysts are able to provide the required sustained activity at near-room-temperature conditions. The development of highly active and selective PROX catalysts is highly desirable but has been proven to be extremely challenging. Pt nanoparticles with a size of (1.2±0.1) nm were synthesized in situ on 32 nm magnetite nanoparticles, which were previously deposited on alumina supports. The resulting catalyst was found to be highly active towards the preferential oxidation of CO in a H2-rich reformate stream and gave 100 % CO conversion at 25 °C with a weight hourly space velocity of 0.5 mL min−1 mg−1 and an oxygen excess factor (λ) of 2., The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the ERC Advanced Grant program (ERC-Grant Agreement N°267626, HECTOR), the Government of Aragon, and the European Social Fund are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ temperature measurements in microwave-heated gassolid catalytic systems. Detection of hot spots and solid-fluid temperature gradients in the ethylene epoxidation reaction 

  • Ramírez, Adrian
  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
Infrared thermographic techniques have been used for the first time to determine real-time gas and solid temperatures, as well as gas-solid temperature gradients in microwave heated structured reactors. A special reactor vessel has been developed that allows direct observation of the catalyst under microwave heating, and an operating procedure is presented to obtain gas and solid apparent emissivities as a function of temperature. These values are thereafter used to calculate temperatures at any point in the gas and solid phases under reaction. The method has been used to obtain gas and solid temperatures during the ethylene epoxidation reaction carried out on a silver-copper oxide catalyst. The direct heating of the monolith walls produced a stable, large temperature gradient between the solid and the gas phase., Financial support from the European Research Council Advanced Grant (HECTOR-267626) and the Regional Government of Aragon (DGA) is gratefully acknowledged. TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA), Universidad de Zaragoza (Spain)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nano-heaters: New insights on the outstanding deposition of dielectric energy on perovskite nanoparticles

  • Gracia, J.
  • Escuin, M.
  • Mallada, R.
  • Navascues, N.
  • Santamaria, J.
It has been experimentally observed that, in some Mott nanomaterials, outstanding dielectric losses may appear at microwave frequencies, leading to a rapid increase of temperature. This often takes place in association with the insulator to metal transition (IMT) in these materials. However, when other materials with a similar structure and composition are subjected to the same intensity of microwave (MW) irradiation, the observed heating is minimal. Here we show that the electron dynamics of these materials are responsible for their different heating behaviour. More specifically, for LaCoO3 perovskite nanoparticles, the spin shifts causing the IMT are also responsible for the observed heating behaviour. Under suitable conditions, the intense absorption of MW radiation leads to extremely high heating rates, above 600 degrees per second. The insight gained from this study has been used to design a directly heated catalytic system (LaCoO3 perovskite nanoparticles on a MW-transparent cordierite monolith) capable to operate under a stable, significant solid-gas temperature gradient.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrospun Au/CeO2 nanofibers: A highly accessible low-pressure drop catalyst for preferential CO oxidation

  • Moreno, I.
  • Navascues, N.
  • Irusta, S.
  • Santamaria, J.
Au/CeO2 catalysts shaped as nanofibers were obtained by supporting Au nanoparticles (ca. 3 nm) on CeO2 nanofibers of around 200 nm diameter. The CeO2 support was prepared by calcining electrospun polymer nanocomposite fibers with a high Ce content; then gold nanoparticles were either synthesized in situ or deposited from a suspension. The prepared catalysts were used in the preferential oxidation of CO in a hydrogen-rich stream. The catalysts prepared by deposition of preformed gold nanoparticles were less stable and underwent sintering due to a weaker nanoparticle–support interaction. In contrast, the catalysts with Au nanoparticles synthesized in situ were active (90% conversion and 46% selectivity) and stable. The fiber-shaped catalyst was able to give maximum reactant access at a much lower pressure drop than catalyst in powder form.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Amine-functionalized mesoporous silica: A material capable of CO2 adsorption and fast regeneration by microwave heating

  • Nigar, H.
  • Garcia-Baños, B.
  • Peñaranda-Foix, F.L.
  • Catalá-Civera, J.M.
  • Mallada, R.
  • Santamaría, J.
The surface of ordered mesoporous (MCM-48) silica has been subjected to covalent grafting with silane molecules containing one to three amino groups. The dielectric properties of the materials were studied in detail, and the functionalized materials were used for CO2 adsorption at room temperature, followed by regeneration under either conventional heating or microwave irradiation. It has been found that, as the intensity of functionalization with amino groups increases (from mono- to tri-amino silanes) both the CO2 load and the dielectric response at microwave frequencies increase. In particular, functionalization with a tri-amino silane derivative gave the highest CO2 adsorption and the fastest microwave heating, resulting in a fourfold acceleration of adsorbent regeneration. The grafted material was fully stable for at least 20 adsorption-regeneration cycles, making it an ideal candidate for microwave-swing adsorption (MWSA) processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ethylene epoxidation in microwave heated structured reactors

  • Ramírez, A.
  • Hueso, J. L.
  • Mallada, R.
  • Santamaría, J.
In the present work we show the microwave-induced heating of monolithic reactors containing a thin-layered catalyst that exhibits a strong and selective heating susceptibility under microwave irradiation. The combination of microwave radiation and structured reactors has been successfully applied for the intensification of the selective oxidation of ethylene to ethylene oxide (epoxidation) while operating at lower power consumptions and with higher energy efficiencies than in conventional heating conditions. The microwave radiation selectively heats the catalyst and the monolith walls while maintaining a relatively colder gas stream thereby creating a gas/solid temperature gradient of up to ~70 °C at a reaction temperature of 225 °C. Moreover, the influence of different parameters such as the distribution of the catalyst onto the structured monoliths or the temperature measurement techniques employed to determine the heating profiles (Optic Fibers and/or IR thermography) have been also thoroughly evaluated to justify the obtained catalytic results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

A Nanoarchitecture Based on Silver and Copper Oxide with an Exceptional Response in the Chlorine-Promoted Epoxidation of Ethylene

  • Ramirez, A.
  • Hueso, J. L.
  • Suarez, H.
  • Mallada, R.
  • Ibarra, A.
  • Irusta, S.
  • Santamaria, J.
The selective oxidation of ethylene to ethylene epoxide is highly challenging as a result of competing reaction pathways leading to the deep oxidation of both ethylene and ethylene oxide. Herein we present a novel catalyst based on silver and copper oxide with an excellent response in the selective oxidation pathway towards ethylene epoxide. The catalyst is composed of different silver nanostructures dispersed on a tubular copper oxide matrix. This type of hybrid nanoarchitecture seems to facilitate the accommodation of chlorine promoters, leading to high yields at low reaction temperatures. The stability after the addition of chlorine promoters implies a substantial improvement over the industrial practice: a single pretreatment step at ambient pressure suffices in contrast with the common practice of continuously feeding organochlorinated precursors during the reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In situ temperature measurements in microwave-heated gassolid catalytic systems. Detection of hot spots and solid-fluid temperature gradients in the ethylene epoxidation reaction

  • Ramírez, A.
  • Hueso, J.L.
  • Mallada, R.
  • Santamaria, J.
Infrared thermographic techniques have been used for the first time to determine real-time gas and solid temperatures, as well as gas- solid temperature gradients in microwave heated structured reactors. A special reactor vessel has been developed that allows direct observation of the catalyst under microwave heating, and an operating procedure is presented to obtain gas and solid apparent emissivities as a function of temperature. These values are thereafter used to calculate temperatures at any point in the gas and solid phases under reaction. The method has been used to obtain gas and solid temperatures during the ethylene epoxidation reaction carried out on a silver-copper oxide catalyst. The direct heating of the monolith walls produced a stable, large temperature gradient between the solid and the gas phase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Extraordinary sensitizing effect of co-doped carbon nanodots derived from mate herb: application to enhanced photocatalytic degradation of chlorinated wastewater compounds under visible light

  • Ortega-Liebana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Arenal, Raul
  • Irusta, Silvia
  • Yeung, King L.
  • Santamaria, Jesus
tThe present work investigates the role of two types of carbon nanodots (CNDs) as novel sensitizers of TiO2to create a visible-light driven photo-catalyst that is not only efficient for solar-driven pollution abate-ment, but also inexpensive, durable and environmentally-friendly. Two widely available green organicprecursors, the Argentinean herb Mate and the Stevia plant have been selected as the carbogenic sourceto thermally induce the formation of different types of CNDs with different levels of N and P doping andtunable photoluminescence response in the UV–vis-near infrared (NIR) ranges. These CNDs have beensuccessfully assembled with TiO2to form heterogeneous photocatalysts that are highly active in thevisible-light and NIR- driven photodegradation of 2,4-dichlorophenol (2,4-DCP), a persistent chlorinatedorganic compound present in numerous pesticide formulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Uniform luminescent carbon nanodots prepared by rapid pyrolysis of organic precursors confined within nanoporous templating structures

  • Ortega-Liebana, M.
  • Chung, N. X.
  • Limpens, R.
  • Gomez, L.
  • Hueso, J. L.
  • Santamaria, J.
  • Gregorkiewicz, T.
Although several methods on the preparation of carbon nanodots (CNDs) emitting throughout the visible have been recently reported, in most of the processes the product suffers from inhomogeneity in size and shape limiting their impact. Here, we report the synthesis of undoped and nitrogen-doped luminescent carbon nanodots by rapid pyrolysis using ordered mesoporous silica nanorods as confining templates. A rapid thermal decomposition (pyrolysis) within the confined dimensions of their pores leads to a highly uniform size distribution of CNDs with average sizes below 4 nm. These CNDs are synthesized in an extremely short time period (5 min of reaction) by immersion in a fluidized-bed reactor that provides heating homogeneity and ensures fast heat transfer. In addition, a rapid release of the homogeneous CNDs can be easily achieved by a simple ultrasonication-filtration step that prevents further chemical action on the mesoporous templates. The emission of both undoped and N-doped CNDs in colloidal and solid state (with an efficiency of 1–5%) originates from a combination of quantum confinement effects and the presence of oxidized surface states; N-doping introduces resonant absorption states which participate in emission. Furthermore, we present a simple model to describe the excitation-dependent/-independent mechanism of carbon nanodots.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Uson, Laura
  • Hueso, José L.
  • Sebastian, Víctor
  • Arenal, Raul
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaria, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Luminescent mesoporous nanorods as photocatalytic enzyme-like peroxidase surrogates

  • Ortega-Liebana, M.Carmen
  • Hueso, Jose L.
  • Fernandez-Pacheco, Rodrigo
  • Irusta, Silvia
  • Santamaria, Jesus
Herein we report on a novel inorganic peroxidase-mimicking nanocatalyst activated under blue LED photoirradiation. A novel flash-pyrolysis method has been developed for the generation of strong blue photoluminescence (PL) centers attributed to silicon and carbon-based sites within a mesoporous SBA-15 silica nanorod platform. The type of centers and their PL response can be controlled by varying the flash thermal treatment conditions. By tailoring the operating conditions the system can be driven towards the preferential generation of carbon-based luminescent centers, with or without the simultaneous generation of silicon-based centers. The properties and the nature of these luminescent centers within the mesoporous nanorods have been thoroughly corroborated by a battery of characterization techniques including fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) at the local level of the structures combined with scanning transmission electron microscopy (STEM) imaging. In addition, these luminescent mesoporous nanorods have been successfully tested as robust photocatalysts able to display peroxidase-like activity and indirect glucose sensing in a wider range of pH conditions compared to the natural enzyme, especially when carbogenic dots and oxygen-deficient silica centers are simultaneously present in the structure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Escaping undesired gas-phase chemistry: Microwave-driven selectivity enhancement in heterogeneous catalytic reactors

  • Ramirez, A.
  • Hueso, J.L.
  • Abian, M.
  • Alzueta, M.U.
  • Mallada, R.
  • Santamaria, J.
Research in solid-gas heterogeneous catalytic processes is typically aimed toward optimization of catalyst composition to achieve a higher conversion and, especially, a higher selectivity. However, even with the most selective catalysts, an upper limit is found: Above a certain temperature, gas-phase reactions become important and their effects cannot be neglected. Here, we apply a microwave field to a catalyst-support ensemble capable of direct microwave heating (MWH). We have taken extra precautions to ensure that (i) the solid phase is free from significant hot spots and (ii) an accurate estimation of both solid and gas temperatures is obtained. MWH allows operating with a catalyst that is significantly hotter than the surrounding gas, achieving a high conversion on the catalyst while reducing undesired homogeneous reactions. We demonstrate the concept with the CO 2 -mediated oxidative dehydrogenation of isobutane, but it can be applied to any system with significant undesired homogeneous contributions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Green synthesis of a Cu/SiO2 catalyst for efficient H2-SCR of NO

  • Gioria, Esteban
  • Marchesini, F. Albana
  • Soldati, Analia
  • Giorello, Antonella
  • Hueso, José L.
  • Gutiérrez, Laura
In this work, the synthesis of Cu/SiO2 catalysts starting frompre-formed copper nanoparticle (CuNP) colloidal suspensions was carried out. Two different protocols for the CuNP synthesis were tested: (i) a green approach using water as solvent and ascorbic acid as reducer and stabilizing agent, and (ii) a second solvothermal method involving the use of diethylene glycol as solvent, sodium hypophosphite (NaH2PO2) as reducer, and polyvinylpyrrolidone (PVP) and cetyltrimethylammonium bromide (CTAB) as stabilizing agents. In addition, and for the sake of comparison, a third catalyst was prepared by solid state conventional grinding of CuO with SiO2. The catalysts were tested in the environmentally relevant catalytic reduction of NOX with H2, in a temperature range from 300 to 500 °C. The catalysts were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR) cycles, Raman spectroscopy, and N2 adsorption for specific surface BET measurements. From these techniques CuO and Cu(0) species were detected depending on the synthesis protocol. CuNP size and size distribution in the colloid suspensions were determined by transmission electronic microscopy (TEM). The catalyst prepared from the aqueous suspension (CuAsc/SiO2) exhibited higher NO conversion (100%) and selectivity (85%) toward N2 at the lower reaction evaluated temperature (300 °C). The CuCTAB/SiO2 catalyst obtained by the solvothermal approach showed activity at high reaction temperature (400 °C) preferentially. The metal-support mechanical mixture exhibited a negligible response at low temperature and low conversion (68%) and selectivity (88%) at 500 °C. Nanoparticle size and distribution on the support, together with the metal-support interaction, were postulated as the most plausible parameters governing the catalytic performance of the different Cu/SiO2 materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Upconverting Carbon Nanodots from EDTA as Near-Infrared Activated Phototheranostic Agents

  • Ortega-Liebana, M.C.
  • Encabo-Berzosa, M.M.
  • Casanova, Á
  • Pereboom, M.D.
  • Alda, O.
  • Hueso, J.L.
  • Santamaría, J.
This work describes the synthesis of nitrogen-doped carbon nanodots (CNDs) synthesized from ethylene diamine tetra acetic acid (EDTA) as a precursor and their application as luminescent agents with a dual-mode theranostic role as near-infrared (NIR) triggered imaging and photodynamic therapy agents. Interestingly, these fluorescent CNDs are more rapidly and selectively internalized in tumor cells and exhibit no cytotoxicity until remotely activated with a NIR illumination source. These CNDs are excellent candidates for photo-theranostic purposes, i.e.: simultaneous imaging and therapy can be carried out on cancer cells using their luminescent properties and the in situ generation of reactive oxidative species (ROS) upon excitation in the NIR range. In the presence of CNDs NIR remote activation induces the in vitro killing of U251 MG cells. Through the use of flow imaging cytometry we have been able to successfully map and quantify the different type of cell deaths induced by the presence of intracellular superoxide anions (¿O2-) and hydrogen peroxide (H2O2) ROS species generated in situ upon NIR irradiation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microwave-activated structured reactors to maximize propylene selectivity in the oxidative dehydrogenation of propane

  • Ramírez, Adrián
  • Hueso, José Luis
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave (MW) heating has been applied to increase the selectivity to propylene in the oxidative dehydrogenation (ODH) of propane. The preferential heating of the solid monolith (made of SiC, a good microwave susceptor), allows working with a lower gas phase temperature, reducing the formation of undesired by-products in the gas phase via homogeneous reactions. Conversion levels of ~ 21% and selectivity to propylene up to 70% have been achieved with MW-heated straight channel monolithic reactors coated with a VMgO catalyst. These competitive values contrast with the more limited performance delivered by the same catalytic system when it is subjected to conventional heating in a fixed-bed reactor configuration, thereby corroborating the advantage of working under a significant gas–solid temperature gap to minimize the extent of homogeneous reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas-solid contactors and catalytic reactors with direct microwave heating: current status and perspectives

  • Hueso, José L.
  • Mallada, Reyes
  • Santamaría, Jesús
Microwave heating (MWH) transforms energy from an electromagnetic wave to heat. In contrast to conventional heating (CH) mechanisms that use slower heat transfer processes via conduction, convection or radiation, microwaves (MW) directly interact with MW susceptor materials and induce a rapid conversion of the electromagnetic energy into heat. This rapid heating provides MWH with distinct features that can be leveraged to increase conversion, selectivity and/or energy efficiency of chemical processes. Here we discuss recent significant advances reported in MWH processes involving gas-solid interactions. Special attention is devoted to key aspects such as the methodologies to accurately determine local temperatures under the influence of electromagnetic (EM). Other relevant aspects such as the consideration of the solid catalyst dielectric properties or the design of novel gas-solid contactor configurations will be discussed. Emerging aspects such as the potential of MWH to minimize secondary by-products in high temperature reactions or to efficiently perform in transient processes, e.g. adsorption-desorption cycles, are highlighted. Finally, current challenges and perspectives towards a wide application of MWH in gas solid contactors will be critically discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liebana, M.C.
  • Hueso Martos, José Luis
  • Arenal, R.
  • Santamaria, J.
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unravelling the key factors in the chlorine-promoted epoxidation of ethylene over a silver-copper oxide nanocatalyst

  • Urbiztondo, Miguel
  • Ramirez, Adrian
  • Hueso, Jose L.
  • Santamaria, Jesus
  • Ruiz-Salvador, A. Rabdel
  • Hamad, Said
Ethylene oxide is one of the most important raw materials in the chemical industry, with an annual production close to 35 million metric tons. Despite its importance, to date, no metal has been found that can compete with the original silver bulk material catalyst discovered in 1931. Recently, a few copper and copper-silver based nanostructures have demonstrated remarkable selectivity and activity, especially when coupled with an industrial chlorine promoter. The present work evaluates the mechanistic role of chlorine as an active promoter of the selective oxidation of ethylene to ethylene oxide in the presence of a silver-copper oxide hybrid nanocatalyst (AgCuO). Experimental kinetic studies combined with density functional theory (DFT) calculations provide insight into the influence that Ag/CuO-supported chlorine atoms have over the ethylene epoxidation reaction. Remarkably, the typically described indirect route via the formation of an oxametallacycle (OMC) is also accompanied by a direct route. Furthermore, the presence of chlorine seems to facilitate a more favorable adsorption energy for ethylene oxide (EO) than for acetaldehyde (AA), the main reaction by-product. As a result, complete oxidation of EO can be further prevented in the presence of this AgCuO hybrid heteronanostructure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nitrogen-doped luminescent carbon nanodots for optimal photo-generation of hydroxyl radicals and visible-light expanded photo-catalysis

  • Ortega-Liébana, M.
  • Hueso, J. L.
  • Ferdousi, S.
  • Yeung, K. L.
  • Santamaría, Jesús
Luminescent carbon nanodots (CNDs) have been obtained by hydrothermal processing of ascorbic acid (AA) and ethanolamine (EN). The resulting N-doped carbon nanostructures exhibit interesting and tunable emission capabilities with a dual behavior as down-converters and more importantly, as up-converting quantum dots. Herein, we also evaluate the optical response of these CNDs to selectively generate highly reactive oxidative hydroxyls (OH) upon irradiation with different light-emitting diodes (LEDs) in the visible-NIR range. Finally, the role of the N-doped CNDs as nano-sensitizers to maximize the solar light harvesting and expand the photo-catalytic response of a commonly used UV-active catalyst such as TiO2 was successfully tested in the degradation of an organo-chlorinated compound under visible light.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of gold-decorated halloysite nanotubes as plasmonic photocatalysts

  • Gómez, Leyre
  • Hueso, José L
  • Ortega-Liébana, M. Carmen
  • Santamaría, Jesús
  • Cronin, Stephen B.
Herein we report on the synthesis of gold-decorated halloysite nanotubes (HNTs) and their evaluation as photocatalysts in the degradation of a model organic contaminant. The combination of photo-thermally-induced local heating and charge transfer mechanisms between the nanostructured gold surface and the organic molecule results in the observed dye decomposition. The use of an inexpensive natural clay support with suitable surface chemistry and adsorption properties represents an eco-friendly method for light-induced oxidation reactions carried out at ambient temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gold-coated halloysite nanotubes as tunable plasmonic platforms

  • Zieba, Maciej
  • Hueso, José L.
  • Arruebo, Manuel
  • Martínez, Gema
  • Santamaría, Jesús
We propose the use of natural Halloysite Hollow Nanotubes (HNTs) as supports to generate plasmonic platforms with remotely triggered heating capacity. The chemical modification and subsequent coating with nanostructured gold either in the form of individually dispersed particles or by forming a shell with variable thickness and interconnectivity has been studied. The dielectric nature of the silica in conjunction with the plasmonic gold layer allows a flexible optical response with tunable maximum absorptions within the visible to Near-Infrared (NIR) range. The generation of hollow gold nanotubes using halloysite as a sacrificial template is also demonstrated.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

The temporal evolution of the energy flux across scales in homogeneous turbulence

  • Cardesa Dueñas, José Ignacio
  • Vela Martín, Alberto|||0000-0003-4561-8683
  • Dong, Siwei
  • Jiménez Sendín, Javier|||0000-0003-0755-843X