Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 65
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magneto-plasmonic nanoparticles as theranostic platforms for magnetic resonance imaging, drug delivery and NIR hyperthermia applications

  • Marquina, Clara
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Ricote, J.
et al., PEGylated magneto-plasmonic nanoparticles with a hollow or semi-hollow interior have been successfully synthesized and their physico-chemical characteristics have been investigated. The hollow interior space can be used to store drugs or other molecules of interest whereas magnetic characterization shows their potential as contrast agents in magnetic resonance imaging (MRI) applications. In addition, their plasmonic characteristics in the near infrared (NIR) region make them efficient in photothermal applications producing high temperature gradients after short irradiation times. We show that by controlling the etching conditions the inner silica shell can be selectively dissolved to achieve a hollow or semi-hollow interior without compromising the magnetic or plasmonic characteristics of the resulting nanoparticles. Magnetic measurements and transmission electron microscopy observations have been used to demonstrate the precise control during the etching process and to select an optimal concentration of the etching reagent and contact time to preserve the inner superparamagnetic iron oxide-based nanoparticles and the plasmonic properties of the constructs. Drug loading capabilities were also evaluated for both semi-hollow and as-synthesized nanoparticles using Rhodamine B isothiocyanate as a model compound. The nanoparticles produced could be potentially used as >theranostic> nanoparticles with both imaging capabilities and a dual therapeutic function (drug delivery and hyperthermia). This journal is © the Partner Organisations 2014., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the MAT2011-24988 grant. The ERC (Advanced Grant HECTOR) and People Program (Marie Curie Actions) of the EU under the REA grant agreement no. 321642 are also gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High surface coverage of a self-assembled monolayer by in situ synthesis of palladium nanodeposits

  • Herrer, I. Lucía
  • Sebastián, Víctor
  • Martín, Santiago
  • González-Orive, Alejandro
  • Perez Murano, Francesc X.
  • Low, Paul J.
  • Serrano, José Luis
  • Ricote, J.
  • Cea, Pilar
Nascent metal|monolayer|metal devices have been fabricated by depositing palladium, produced through a CO-confined growth method, onto a self-assembled monolayer of an amine-terminated oligo(phenylene ethynylene) derivative on a gold bottom electrode. The high surface area coverage (85%) of the organic monolayer by densely packed palladium particles was confirmed by X-ray photoemission spectroscopy (XPS) and atomic force microscopy (AFM). The electrical properties of these nascent Au|monolayer|Pd assemblies were determined from the I-V curves recorded with a conductive-AFM using the Peak Force Tunneling AFM (PF-TUNA™) mode. The I-V curves together with the electrochemical experiments performed rule out the formation of short-circuits due to palladium penetration through the monolayer, suggesting that the palladium deposition strategy is an effective method for the fabrication of molecular junctions without damaging the organic layer., P. C. is grateful for financial assistance from Ministerio de Economía y Competitividad, Spain and fondos FEDER in the framework of project MAT2016-78257-R. S. M. and P. C. also acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E-54). V. S. acknowledges the support of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research. P. J. L. gratefully acknowledges support from the Australian Research Council (FT120100073; DP140100855). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reactive gas atmospheres as a tool for the synthesis of MOFs: the creation of a metal hybrid fumarate with a controlled Fe/Al composition profile

  • Monteagudo-Olivan, Rebeca
  • Arruebo, Manuel
  • López-Ram-de-Víu, Pilar
  • Sebastián, Víctor
  • Coronas, Joaquín
The use of reactive gas atmospheres is proposed here as a new tool to control the synthesis of MOFs. With the addition of Al to an Fe-fumarate synthesis medium (which produces the typical structure of MOF MIL-88A(Fe)), a hybrid Fe/Al-fumarate that exhibits the structure of MOF MIL-53(Al)-FA was obtained even though both metals could be identified in the resulting material by STEM-HAADF. The use of CO and O2 atmospheres (6 bar) in the synthesis of both MIL-88A(Fe) and MIL-53(Fe/Al)-FA might accelerate their synthesis and give rise to a highly crystalline solid and to core–shell nanoparticles (190 ± 42 nm) with an Fe-rich core surrounded by an Al-rich shell, i.e., with a controlled Fe/Al atomic distribution. After pyrolysis the MIL-53(Fe/Al)-FA particles exhibited superparamagnetism while keeping some texture (244 m2 g−1vs. 862 m2 g−1 of the as-made material)., The authors acknowledge financial support from the Spanish MINECO and FEDER (MAT2016-77290-R), Aragón Government (DGA, T05), Universidad de Zaragoza (2007/0016) and ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) and People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas-directed production of noble metal-magnetic heteronanostructures in continuous fashion: Application in catalysis

  • Larrea, Ángel
  • Eguizabal, Adela
  • Sebastián, Víctor
Complex nanomaterials produced by scale-up batch processes lack suitable control of shape, size distribution, chemical composition, and quality, because heat and mass transfer are seriously affected as the reactor volume increases. Here we use a novel continuous synthesis procedure, the active gas–liquid segmented flow, to produce noble metal-magnetic heteronanostructures with enormous interest in the fields of catalysis, biomedicine, environmental sensors, food monitoring, and chemical analysis. The microreactor technology proposed scales down the reaction volume to gain advantage of the large surface area to volume ratio with respect to conventional batch-type reactors, improving heat and mass transport and, consequently, promoting a uniform heating and mixing. The gas phase was introduced in the chemical reactor as gas slugs of nanoliter scale with a dual role: (1) passive mixing and (2) chemical directing agent to tune the crystallization of nanostructures in a continuous fashion. The shape, size, and magnetic properties of the resulting heteronanostructures, as well as the density, size, and composition of noble metal nanoparticles were tuned to show the versatility of the proposed approach in a timeline of 4 min. We demonstrated that the produced nanostructures provide excellent catalytic properties in the catalyzed hydrogenation of nitrophenols to aminophenols. Electron microscopy, UV–vis spectroscopy, and cyclic voltammetry studies showed the remarkable catalytic performance of the produced heteronanostructures., The EU CIG-Marie Curie under the REA Grant No. 321642 and the Programa Estatal De I+D+I Orientada A Los Retos De La Sociedad, En El Marco Del Plan Estatal De Investigacion Cientifica Y Tecnica Y De Innovacion 2017-2020 (RTI2018- 099019-A-I00) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The effect of hydrogen peroxide on the synthesis of terephthalate‐based metal‐organic frameworks

  • Monteagudo-Olivan, Rebeca
  • Jiménez‐Fernández, Isabel
  • López-Ram-de-Víu, Pilar
  • Sebastián, Víctor
  • Coronas, Joaquín
Metal‐organic frameworks (MOFs) are versatile materials for applications in fields including the environment, energy and health. A synthetic route for improving the formation of MOFs has been developed and is triggered by hydrogen peroxide (H2O2) to promote the formation of terephthalate‐based MOFs of MIL‐53 and MIL‐68 types, specifically those made from Fe3+ and Al3+ and mixtures of both. Different characterization techniques (TGA, XRD, SEM, TEM, N2 porosimetry and Raman, mass and NMR spectroscopies) gave insights into the effect of H2O2 on the MOF synthesis. The reaction yield was significantly improved (the highest yield being 74 % for MIL‐53(Al)), while crystallinity and N2 adsorption properties were mostly maintained for phases based on Al and Al/Fe. Furthermore, a reaction mechanism was envisaged from the mass spectroscopic analysis of the reaction solutions, thus suggesting that H2O2 plays the role of a μ‐hydroxo bridge promoter, favoring the link between terephthalate ligands and aluminum‐containing species to give rise to the μ‐carboxylate bridges, leading to a faster growth of the final MOF, and offering a novel MOF synthesis approach., The authors thank financial support from the Spanish MINECO and FEDER (MAT2016‐77290‐R), Aragón Government (T43‐17R & E102) and the People Program (CIG‐Marie Curie Actions, REA grant agreement no. 321642). CIBER‐BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights into the mechanism of the formation of noble metal nanoparticles by in situ NMR spectroscopy

  • Mateo, José Miguel
  • Hoz, Antonio de la
  • Usón, Laura
  • Arruebo, Manuel
  • Sebastián, Víctor
  • Gómez, M. Victoria
High-resolution solution Nuclear Magnetic Resonance (NMR) spectroscopy has been used to gain insights into the mechanism of the formation of gold, platinum and gold–platinum alloyed nanoparticles using metal precursors and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as starting materials. THPC is widely used in nanochemistry as a reductant and stabilizer of nanoparticles, however the identity of the species responsible for each role is unknown. The multinuclear study of the reaction media by NMR spectroscopy allowed us to elucidate the structure of all the compounds that participate in the transformation from the metal salt precursor to the reduced metal that forms the nanoparticle, thus clarifying the controversy found in the literature regarding the formation of THPC-based compounds. The progress of the reaction was monitored from the initial moments of the synthesis to the end of the reaction and after long periods of time. Insights into the dual role of THPC were gained, identifying methanol and hydrogen as the actual reducing agents, and tris(hydroxymethyl)phosphine oxide (THPO) as the real stabilizing agent. Finally, the different stabilities of gold and platinum nanoparticles can be attributed to the different catalytic activities of the metals., We acknowledge financial support from the Spanish Ministry of Science and Innovation (CTQ2017-84825-R). J. M. M. thanks the University of Castilla-La Mancha for a pre-doctoral contract for the formation of research personal at UCLM in the framework of Plan Propio of I + D + i. M. A. thanks the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) and V. S. the EU CIG−Marie Curie project under the REA grant agreement no. 321642. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and is financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund. M. V. G. thanks the Ministerio de Economía y Competitividad (MINECO) for participation in the Ramón y Cajal program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accelerating the controlled synthesis of metal-organic frameworks by a microfluidic approach: A nanoliter continuous reactor

  • Paseta, Lorena
  • Seoane, Beatriz
  • Julve, Daniel
  • Sebastián, Víctor
  • Téllez, Carlos
  • Coronas, Joaquín
Segmented microfluidics was applied to the ultrafast crystallization of dicarboxylate based MIL-88B type metal-organic frameworks (MOFs; Fe-MIL-88B-NH2, Fe-MIL-88B, and Fe-MIL-88B-Br). Particular attention was paid to the influence of the temperature, residence time, and slug volume on the size and crystal size distribution of the MOFs. Average sizes in the 90-900 nm range with relatively narrow crystal size distributions were obtained with residence times as short as 20 s depending on the MOF type and synthesis conditions., Financial support from the Spanish Ministry of Economy and Competitiveness (MAT2010-15870 and FPU Program fellowship for B.S.), the Aragón Government, the ESF, and the People Program (Marie Curie Actions) of the EU under REA grant agreement no. 321642 are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advances in draw solutes for forward osmosis: Hybrid organic-inorganic nanoparticles and conventional solutes

  • Alejo, Teresa
  • Arruebo, Manuel
  • Carcelén, Verónica
  • Monsalvo, Victor M.
  • Sebastián, Víctor
Forward osmosis (FO) is one of the emerging membrane technologies which has gained interest in the last decade for being a low energy desalination process. The most important factors controlling FO processes are performance, recyclability and cost of the draw solution (DS) used together with the FO membrane itself because they play a crucial role on the feasibility of this technology. Consequently, the selection of an appropriate DS is vital for the process efficiency, besides the required selectivity and permeance of the membrane and the efficient DS regeneration process. A wide variety of DS have been tested so far and this paper aims to review recent advances in the synthesis and selection of an appropriate DS. It provides valuable information on a new type of draw solutes based on hybrid organic-inorganic nanosystems which, at a certain extent, show synergistic properties that face some of the technology shortcomings. Magnetic nanoparticles (MNPs) are the most promising nanosystems intended for desalination because they can be readily recovered applying a magnetic field or by conventional membrane processes. This review also deals with the most important characteristics of DS based on nanoparticles (NPs) and how they affect the performance of the overall processes. Finally, this review also highlights future research directions, where nanosystems will mitigate inverse diffusion and concentration polarization phenomena widely reported as limiting factors in FO processes., Abengoa Research, the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An in depth investigation of deactivation through carbon formation during the biogas dry reforming reaction for Ni supported on modified with CeO2 and La2O3 zirconia catalysts

  • Charisiou, Nikolaos D.
  • Siakavelas, Georgios I.
  • Tzounis, Lazaros
  • Sebastián, Víctor
  • Monzón, Antonio
  • Baker, Mark A.
  • Hinder, Steven J.
  • Polychronopoulou, Kyriaki
  • Yentekakis, I. V.
  • Goula, Maria A.
The dry reforming of biogas on a Ni catalyst supported on three commercially available materials (ZrO2, La2O3single bondZrO2 and CeO2single bondZrO2), has been investigated, paying particular attention to carbon deposition. The DRM efficiency of the catalysts was studied in the temperature range of 500–800 °C at three distinct space velocities, and their time-on-stream stability at four temperatures (550, 650, 750 and 800 °C) was determined for 10 or 50 h operation. The morphological, textural and other physicochemical characteristics of fresh and spent catalysts together with the amount and type of carbon deposited were examined by a number of techniques including BET-BJH method, CO2 and NH3-TPD, XPS, SEM, TEM, STEM-HAADF, Raman spectroscopy, and TGA/DTG. The impact of the La2O3 and CeO2 modifiers on the DRM performance and time-on-stream stability of the Ni/ZrO2 catalyst was found to be very beneficial: up to 20 and 30% enhancement in CH4 and CO2 conversions respectively, accompanied with a CO-enriched syngas product, while the 50 h time-on-stream catalytic performance deterioration of ∼30–35% on Ni/ZrO2 was limited to less than ∼15–20% on the La2O3 and CeO2 modified samples. Their influence on the amount and type of carbon formed was substantial: it was revealed that faster oxidation of the deposited carbon at elevated temperatures occurs on the modified catalysts. Correlations between the La2O3 and CeO2-induced modifications on the surface characteristics and physicochemical properties of the catalyst with their concomitant support-mediated effects on the overall DRM performance and carbon deposition were revealed., V.S. acknowledges the financial support from EU CIG–Marie Curie under the REA grant agreement no. 321642. V.S. is also grateful to CIBER-BBN, which is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with the assistance from the European Regional Development Fund. KP acknowledges the financial support through the ADEK Award for Research Excellence (AARE 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capture and separation of L-histidine through optimized zinc-decorated magnetic silica spheres

  • Cardoso, Vanessa F.
  • Sebastián, Víctor
  • Silva, Carlos J. R.
  • Botelho, Gabriela
  • Lanceros-Méndez, Senentxu
Zinc-decorated magnetic silica spheres were developed, optimized and tested for the capture and separation of l-histidine. The magnetic silica spheres were prepared using a simple sol-gel method and show excellent magnetic characteristics, adsorption capacity toward metal ions, and stability in aqueous solution in a wide pH range. The binding capacity of zinc-decorated magnetic silica spheres to histidine proved to be strongly influenced by the morphology, composition and concentration of metal at the surface of the magnetic silica spheres and therefore these parameters should be carefully controlled in order to maximize the performance for protein purification purposes. Optimized zinc-decorated magnetic silica spheres demonstrate a binding capacity to l-histidine of approximately 44mgg-1 at the optimum binding pH buffer., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the strategic projects UID/EEA/04436/2013 and UID/FIS/04650/2013, by FEDER funds through the COMPETE 2020–Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941 and by the project EuroNanoMed 2016 call, Project LungChek ENMed/0049/2016. V.F.C. thanks the FCT for the SFRH/BPD/98109/2013 grant. VS acknowledge the financial support from the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642). This work was also supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and the Basque Government Industry Department under the ELKARTEK Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of indium phosphide quantum dot growth intermediates using MALDI-TOF mass spectrometry

  • Xie, Lisi
  • Franke, Daniel
  • Sebastián, Víctor
  • Bawendi, Moungi G.
  • Jensen, Klavs F.
Clusters have been identified as important growth intermediates during group III-V quantum dot (QD) formation. Here we report a one-solvent protocol that integrates synthesis, purification, and mass characterization of indium phosphide (InP) QD growth mixtures. The use of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) successfully tracks the evolution of clusters and the formation of QDs throughout the synthesis. Similar clusters are observed during the formation of large particles, suggesting that these clusters serve as a reservoir for QD formation. Combining MALDI and NMR techniques further enables us to extract extinction coefficients and construct sizing curves for cluster-free InP QDs. The use of MALDI MS opens new opportunities for characterization and mechanistic studies of small-sized air-sensitive clusters or QDs., This work was supported by the National Science Foundation under grant no. ECCS-1449291. D.F. was supported by a Boehringer Ingelheim Fonds fellowship. V.S. acknowledges financial support from EU CIG–Marie Curie under REA grant agreement no. 321642., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous microfluidic synthesis and functionalization of gold nanorods

  • Usón, Laura
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Santamaría, Jesús
A microfluidic platform with multiple reactant additions has been used for the continuous, unseeded synthesis of gold nanorods. This system allows separate control of the seed forming and nanorod growing stages, increasing reproducibility and reducing undesired effects related to a poor control of the seed aging stage. Also, on-stream surface functionalization with poly(ethylene glycol)-methyl ether thiol (SH-PEG) has been performed, allowing a 100-fold reduction in the consumption of this reactant compared to the amounts used in a conventional batch reactor. The system also facilitates tuning the concentration of halide anions (Cl− and Br−) that are used to modify the aspect ratio of the resulting rods., Financial support from the EU thanks to the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) and the People Program (CIG-Marie Curie Actions, REA grant agreement n° 321642) are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous microfluidic synthesis of Pd nanocubes and PdPt core-shell nanoparticles and their catalysis of NO2 reduction

  • Pekkari, Anna
  • Say, Zafer
  • Susarrey-Arce, Arturo
  • Langhammer, Christoph
  • Härelind, Hanna
  • Sebastián, Víctor
  • Moth-Poulsen, Kasper
Faceted colloidal nanoparticles are currently of immense interest due to their unique electronic, optical, and catalytic properties. However, continuous flow synthesis that enables rapid formation of faceted nanoparticles of single or multi-elemental composition is not trivial. We present a continuous flow synthesis route for the synthesis of uniformly sized Pd nanocubes and PdPt core–shell nanoparticles in a single-phase microfluidic reactor, which enables rapid formation of shaped nanoparticles with a reaction time of 3 min. The PdPt core–shell nanoparticles feature a dendritic, high surface area with the Pt shell covering the Pd core, as verified using high-resolution scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. The Pd nanocubes and PdPt core–shell particles are catalytically tested during NO2 reduction in the presence of H2 in a flow pocket reactor. The Pd nanocubes exhibited low-temperature activity (i.e., <136 °C) and poor selectivity performance toward production of N2O or N2, whereas PdPt core–shell nanoparticles showed higher activity and were found to achieve better selectivity during NO2 reduction retaining its basic structure at relatively elevated temperatures, making the PdPt core–shell particles a unique, desirable synergic catalyst material for potential use in NOx abatement processes., We acknowledge financial support from the Knut and Alice Wallenberg Foundation, via project 2015.0055, and the Swedish Foundation for Strategic Research, via project RMA15-0052. V.S. acknowledges the support of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous synthesis of drug-loaded nanoparticles using microchannel emulsification and numerical modeling: Effect of passive mixing

  • Ortiz de Solorzano, Isabel
  • Usón, Laura
  • Larrea, Ane
  • Miana, Mario
  • Sebastián, Víctor
  • Arruebo, Manuel
By using interdigital microfluidic reactors, monodisperse poly(d,l lactic-co-glycolic acid) nanoparticles (NPs) can be produced in a continuous manner and at a large scale (~10 g/h). An optimized synthesis protocol was obtained by selecting the appropriated passive mixer and fluid flow conditions to produce monodisperse NPs. A reduced NP polydispersity was obtained when using the microfluidic platform compared with the one obtained with NPs produced in a conventional discontinuous batch reactor. Cyclosporin, an immunosuppressant drug, was used as a model to validate the efficiency of the microfluidic platform to produce drug-loaded monodisperse poly(d,l lactic-co-glycolic acid) NPs. The influence of the mixer geometries and temperatures were analyzed, and the experimental results were corroborated by using computational fluid dynamic three-dimensional simulations. Flow patterns, mixing times, and mixing efficiencies were calculated, and the model supported with experimental results. The progress of mixing in the interdigital mixer was quantified by using the volume fractions of the organic and aqueous phases used during the emulsification-evaporation process. The developed model and methods were applied to determine the required time for achieving a complete mixing in each microreactor at different fluid flow conditions, temperatures, and mixing rates., The EU CIG–Marie Curie under the REA grant agreement no 321642 and the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous synthesis of palladium nanorods in oxidative segmented flow

  • Sebastián, Víctor
  • Basak, Soubir
  • Jensen, Klavs F.
Laminar and segmented flow methods are presented for producing Pd rod-shaped nanostructures from Na2PdCl4 in mixtures of water, ethylene glycol, polyvinyl pyrrolidone, and KBr. Synthesis in laminar flow produced an evolution from Pd nanoparticles to short nanorods with residence time. Use of air as the segmentation gas tuned the oxidative environment promoting anisotropic growth of Pd. Moreover, the elevated temperatures (160°C and 190°C) and pressure (0.8 MPa) reduced the synthesis time from hours for most batch systems to 2 min. The ratio of polyol and Pd precursor metal flow streams controlled the anisotropic growth, obtaining nanorods with a diameter approximately 4 nm and an aspect ratio up to 6. Nanorods were single crystal with the {100} lattice spacing of fcc structure, and without any dislocation, stacking fault, or twin defects. The resulting Pd nanorods had high activity at moderate temperature (40ºC) and pressure (0.2 MPa) in the catalytic hydrogenation of styrene., Authors acknowledge U.S. National Science Foundation (CHE-0714189) for funding this research. V.S. acknowledges the support of the Fulbright Commission and the Ministry of Education in Spain (Programa Nacional de Movilidad de Recursos Humanos del Plan Nacional de I+D+I 2008-2011), as well as People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of fluorescent thermoresponsive nanoparticles for temperature monitoring on membrane surfaces

  • Santoro, Sergio
  • Sebastián, Víctor
  • Moro, Artur J.
  • Portugal, Carla A. M.
  • Lima, João Carlos
  • Coelhoso, Isabel M.
  • Crespo, João G.
  • Mallada, Reyes
In this work, tris(phenantroline)ruthenium(II) chloride (Ru(phen)3) was immobilized in silica nanoparticles prepared according to the Stöber method. Efforts were devoted on the optimization of the nano-thermometer in terms of size, polydispersity, intensity of the emission and temperature sensitivity. In particular, the immobilization of the luminophore in an external thin shell made of silica grown in a second step on bare silica nanoparticles allowed producing fluorescent monodisperse silica nanoparticles (420 ± 20 nm). A systematic study was addressed to maximize the intensity of the emission of the fluorescent nanoparticles by adjusting the concentration of Ru(phen)32+ in the shell from 0.2 to 24 wt.%, whereas the thickness of the shell is affected by the amount of silica precursor employed., The luminescent activity of the doped nanoparticles was found to be sensitive to the temperature. In fact, the intensity of the emission linearly decreased by increasing the temperature from 20 °C to 65 °C. The thermoresponsive nanoparticles were functionalized with long aliphatic chains in order to obtain hydrophobic nanoparticles. The developed nanoparticles were immobilized via dip-coating procedure on the surface of hydrophobic porous membranes, such as Polyvinylidene fluoride (PVDF) prepared via Non-Solvent Induced Phase Separation (NIPS), providing local information about the membrane surface temperature., Sergio Santoro would like to thank The Education, Audiovisual and Culture Executive Agency (EACEA) for the PhD grant under the Program “Erasmus Mundus Doctorate in Membrane Engineering” – EUDIME (http://www.eudime.unical.it). Artur Moro and Carla A.M. Portugal acknowledge the financial support of “Fundação para a Ciência e Tecnologia” (FCT-MCTES, Portugal) through the Post-Doc grants nr. SFRH/BPD/69210/2010 and SFRH/BPD/103619/2014. The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual encapsulation of hydrophobic and hydrophilic drugs in PLGA nanoparticles by a single-step method: Drug delivery and cytotoxicity assays

  • Español, Laura
  • Larrea, Ane
  • Andreu, Vanesa
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Sebastián, Víctor
  • Santamaría, Jesús
et al., Dual drug encapsulation in biodegradable nanoparticles is always challenging and often requires strenuous optimization of the synthesis–encapsulation processes. This becomes even more difficult when the simultaneous encapsulation of molecules of different polarity is sought. Here we present a modified emulsification–evaporation process to produce polymeric nanoparticles (NPs) made of the biocompatible and biodegradable polymer poly(lactic-co-glycolic acid) (PLGA) and co-encapsulating simultaneously two different drugs, the hydrophobic dexamethasone (DX) and the hydrophilic diclofenac sodium (DS). Three independent processing parameters were systematically modified to promote the incorporation of the different-polarity drugs into PLGA and to control the particle size under 150 nm. The careful selection of the appropriate solvents (ethyl acetate and methanol) was a key requirement for the successful encapsulation of DX and DS. DS and DX release kinetics as well as cytotoxicity assays underlined the therapeutic potential of the dual encapsulation strategy., The authors wish to acknowledge EU CIG-Marie Curie under the REA grant agreement no. 321642 and the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM). The “Fundação de Amparo à Pesquisa do Estado de São Paulo” (FAPESP) and “Conselho Nacional de Desenvolvimento Científico e Tecnológico” (CNPq) for continuous financial support are also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient and facile tuning of Vulcan XC72 with ultra-small Pt nanoparticles for electrocatalytic applications

  • Eguizabal, Adela
  • Usón, Laura
  • Sebastián, Víctor
  • Hueso, José L.
  • Pina, María Pilar
In this work, we report the synergic combination of tiny, reproducible, and crystalline platinum nanoparticles with functionalized Vulcan XC72 support for the preparation of efficient electrocatalysts. The morphology and crystallinity of Pt NPs, the amination of carbon support and the Pt loading have been properly evaluated by TEM, STEM, ATR-FTIR, XPS and microwave plasma-atomic emission spectrometry MP-AES. The electrochemical performance of the as prepared powders has been evaluated and compared with the exhibited by commercial Pt-ETEK catalyst with similar Pt-loadings, i.e. 20% wt. The herein described electrocatalyst shows higher dispersion (98.2 m2 gPt−1) of Pt nanoparticles (1.5 ± 0.3 nm in size) and strong metal–support interaction than commercial Pt-ETEK counterpart, highlighting the elevated mass activity for methanol electrooxidation., Financial supports from the MICINN (MAT2011-24988), People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), “Juan de la Cierva” postdoctoral Fellowship, European Commission through the FP7 funded project ZEOCELL (no. 209481), the Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient production of hybrid bio-nanomaterials by continuous microchannel emulsification: Dye-doped SiO2 and Au-PLGA nanoparticles

  • Larrea, Ane
  • Clemente, Alberto
  • Luque-Michel, Edurne
  • Sebastián, Víctor
A novel microfluidic system was designed to produce in a continuous manner hybrid nanomaterials using the microchannel double w/o/w emulsification technique. Double w/o/w nanoemulsions were produced combining two inter-digital micromixers that afford working in continuous flow and with a high reproducibility and control on the reaction conditions. High throughput production of two hybrid nanomaterials, dye-doped SiO2 (4 mg/min) and Au-loaded poly(lactic-co-glycolic) acid (PLGA) (168 mg/min) nanoparticles, were achieved, showing the resulting nanomaterials excellent and reproducible optical properties and tunable loading. These hybrid nanomaterials could be potentially used in different biomedical applications. In addition, the microfluidic system designed for carrying out double emulsification enabled to decrease the particle size distribution of dye-doped SiO2 nanoparticles (NPs) up to 20 nm and to improve the Au NPs loading efficiency in Au-loaded PLGA hybrid nanoparticles. The excellent control achieved in the Au NPs loading allowed tuning the payload on demand. Finally, the microfluidic system designed in this work overpasses the productivity described in previously published batch-type reactors, while assuring the same properties of the resulting hybrid nanomaterials., This work has been carried out in the framework of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) .The Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Feroxyhyte nanoflakes coupled to up-converting carbon nanodots: A highly active, magnetically recoverable, Fenton-like photocatalyst in the visible-NIR range

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Larrea, Ángel
  • Sebastián, Víctor
  • Santamaría, Jesús
We demonstrate the enhanced photocatalytic response of a novel Fenton-like heterogeneous catalyst obtained through the assembly of superparamagnetic feroxyhyte nanoflakes synthesized by continuous gas-slug microfluidics and carbon nanodots obtained by pyrolysis from a natural organic source. The novel nanohybrids enable the utilization of the visible and near-infrared ranges due to the active role of the carbon nanodots as up-converting photo-sensitizers. This novel photocatalyst is magnetically recoverable and maintains an excellent response after multiple reutilization cycles. In addition, its synthesis is based on inexpensive and abundant raw materials and its photocatalytic response is evaluated in the presence of energy efficient, affordable light-emitting diodes (LEDs), thereby providing a promising and feasible alternative to the homogeneous Fenton process., People Program (CIG-Marie Curie Actions, REA grant agreements no. 294094 and 321642) and HECTOR Advanced Grant are gratefully acknowledged. Government of Aragon is also gratefully acknowledged for financial support. We also thank Dr Bueno-Alejo for his valuable help in the design of the LED-reactor configuration. The experiments have been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas slug microfluidics: A unique tool for ultrafast, highly controlled growth of iron oxide nanostructures

  • Larrea, Ane
  • Sebastián, Víctor
  • Ibarra, Alfonso
  • Arruebo, Manuel
  • Santamaría, Jesús
The use of nanomaterials in real life applications is often hampered by our inability to produce them in large quantities while preserving their desired properties in terms of size, shape, and crystalline phase. Here we present a novel continuous method to synthesize nanostructures with an unprecedented degree of control regarding their properties. In particular, the excellent properties of microreactors for chemical synthesis are enhanced by the introduction of gas slugs of tailored composition. Slug dynamics accelerate mixing, reduce processing times (from hours in batch processes to minutes or even seconds), and, depending on the gas atmosphere used, allows one to accurately control the crystalline phase and shape of the resulting nanostructures. Inert (N2), oxidizing (O2), or reducing (CO, H2) gases were used, leading to different morphologies and crystalline structures in a high yield, highly reproducible fabrication process., The EU CIG-Marie Curie under the REA Grant Agreement No. 321642 and the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) are gratefully acknowledged. A.I. thanks the Gobierno de Aragón (Grant E81) and Fondo Social Europeo., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ preparation of a highly accessible Pt/CNF catalytic layer on metallic microchannel reactors. Application to the SELOX reaction

  • Ramírez, Adrian
  • Sebastián, Víctor
  • Mallada, Reyes
  • Santamaría, Jesús
  • Monzón, Antonio
A general method to prepare a catalytic coating on the surface of stainless steel microreactors has been developed. The catalytic support consists of a layer of randomly oriented, highly accessible carbon nanofibers (CNFs), directly grown on the surface of the channels by chemical vapor deposition (CVD) of ethanol. These CNFs are functionalized to acquire a positive charge before a solution containing metallic nanoparticles (Pt) is flown through the channels. The nanoparticles adhere to the surface of the CNFs thanks to electrostatic interactions. This process is carried out in-situ and the method can be easily adapted to larger scale production. These catalyst-coated microchannel reactors have been tested in the selective oxidation (SELOX) of CO in the presence of H2. The results were compared to those obtained in a conventional fixed bed reactor packed with Pt/CNTs. The microreactor clearly outperformed the fixed bed reactor at the same space velocity (WSHV = 2220 l/h gPt),), achieving total CO conversion at temperatures 50 ºC lower., Authors acknowledge the financial support of the DGA-La Caixa (Grant: 2012/GA LC 086). People Program (Marie Curie Actions) of the EU under the REA grant agreement no. 321642 is also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Usón, Laura
  • Hueso, José L.
  • Sebastián, Víctor
  • Arenal, Raúl
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaría, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction., Financial support from the MICINN through the MAT2011-24988 grant, the European Research Council (ERC-Advanced Grant-HECTOR, grant agreement 267626), People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642 and no. 294094) and the CIBER-BBN. These TEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative – I3). IF acknowledges financial support by the Agence Nationale de la Recherche (ANR) under Contract 756 ANR-BLAN-SIMI10-LS-100617-15-01. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lipid nanoparticles for cyclosporine a administration: Development, characterization, and in vitro evaluation of their immunosuppression activity

  • Guada, Melissa
  • Sebastián, Víctor
  • Irusta, Silvia
  • Feijoó, Esperanza
  • Dios-Viéitez, María del Carmen
Cyclosporine A (CsA) is an immunosuppressant commonly used in transplantation for prevention of organ rejection as well as in the treatment of several autoimmune disorders. Although commercial formulations are available, they have some stability, bioavailability, and toxicity related problems. Some of these issues are associated with the drug or excipients and others with the dosage forms. With the aim of overcoming these drawbacks, lipid nanoparticles (LN) have been proposed as an alternative, since excipients are biocompatible and also a large amount of surfactants and organic solvents can be avoided. CsA was successfully incorporated into LN using the method of hot homogenization followed by ultrasonication. Three different formulations were optimized for CsA oral administration, using different surfactants: Tween(®) 80, phosphatidylcholine, taurocholate and Pluronic(®) F127 (either alone or mixtures). Freshly prepared Precirol nanoparticles showed mean sizes with a narrow size distribution ranging from 121 to 202 nm, and after freeze-drying were between 163 and 270 nm, depending on the stabilizer used. Surface charge was negative in all LN developed. High CsA entrapment efficiency of approximately 100% was achieved. Transmission electron microscopy was used to study the morphology of the optimized LN. Also, the crystallinity of the nanoparticles was studied by X-ray powder diffraction and differential scanning calorimetry. The presence of the drug in LN surfaces was confirmed by X-ray photoelectron spectroscopy. The CsA LN developed preserved their physicochemical properties for 3 months when stored at 4°C. Moreover, when the stabilizer system was composed of two surfactants, the LN formulations were also stable at room temperature. Finally, the new CsA formulations showed in vitro dose-dependent immuno-suppressive effects caused by the inhibition of IL-2 levels secreted from stimulated Jurkat cells. The findings obtained in this paper suggest that new lipid nanosystems are a good alternative to produce physicochemically stable CsA formulations for oral administration., This work has been carried out in the framework of the COST Action TD1004. M Guada thanks “Asociación de Amigos de la Universidad de Navarra” for the fellowship grant. The EU CIG–Marie Curie under the REA grant agreement number 321642 is gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic assisted synthesis of hybrid Au-Pd dumbbell-like nanostructures: Sequential addition of reagents and ultrasonic radiation

  • Sebastián, Víctor
  • Zaborenko, Nikolay
  • Gu, Lei
  • Jensen, Klavs F.
A sequential-addition microfluidic reactor and an ultrasonic integrated microfluidic reactor were designed to produce with high selectivity hybrid Au–Pd dumbbell-like nanostructures (Au–Pd DBNPs), consisting of a palladium segment tipped with gold heads. A single-stage synthesis was not able to synthesize hybrid nanostructures due to the high reactivity of gold. On the other hand, a two-step method was successful by first synthesizing Pd nanorod-like structures and subsequent growing of Au on the tips of those structures by the localized galvanic replacement reaction. The localized deposition of Au onto both tips of palladium rods was achieved by using two different microfluidic approaches: (i) by sequential injection of gold along the reaction channel at 100 °C and a 5 min residence time, and (ii) by ultrasonic radiation at room temperature and a 2 min residence time. The synthesized Au–Pd DBNPs had higher electrocatalytic activity in the ethanol oxidation reaction in alkaline media than the Pd nanorods., Authors acknowledge US NSF Grant (CHE-0714189) for funding this research, and the MRSEC Shared Experimental Facilities at MIT, supported by the National Science Foundation under Award Number DMR-1419807 V.S. acknowledges the support of the Fulbright Commission and the Ministry of Education in Spain (Programa Nacional de Movilidad de Recursos Humanos del Plan Nacional de I+D+I 2008–2011), as well as well as People Program (CIG-Marie Curie Actions, REA Grant Agreement No. 321642) to develop this research. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic synthesis and biological evaluation of photothermal biodegradable Copper sulfide nanoparticles

  • Ortiz de Solorzano, Isabel
  • Prieto, Martín
  • Mendoza, Gracia
  • Alejo, Teresa
  • Irusta, Silvia
  • Sebastián, Víctor
  • Arruebo, Manuel
The continuous synthesis of biodegradable photothermal copper sulfide nanoparticles has been carried out with the aid of a microfluidic platform. A comparative physicochemical characterization of the resulting products from the microreactor and from a conventional batch reactor has been performed. The microreactor is able to operate in a continuous manner and with a 4-fold reduction in the synthesis times compared to that of the conventional batch reactor producing nanoparticles with the same physicochemical requirements. Biodegradation subproducts obtained under simulated physiological conditions have been identified, and a complete cytotoxicological analysis on different cell lines was performed. The photothermal effect of those nanomaterials has been demonstrated in vitro as well as their ability to generate reactive oxygen species., We thank the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) and EU CIG–Marie Curie under the REA grant agreement no. 321642. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and is financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Morphological tunability of the plasmonic response: From hollow gold nanoparticles to gold nanorings

  • Prieto, Martín
  • Arenal, Raúl
  • Henrard, Luc
  • Gomez, Leyre
  • Sebastián, Víctor
  • Arruebo, Manuel
The optical and morphological properties of hollow gold nanoparticles (HGNPs) can be finely modified by employing poly-l-lysine hydrobromide (PLL), a homopoly amino acid of the l-lysine, used as reducer and stabilizer. We demonstrate that the reshaping of these plasmonic hollow nanostructures responds to an Ostwald ripening process in which the initial HGNPs dissolve under the acidic conditions provided by the PLL generating chloroaurate ions. These ions are then reduced by the primary amines of the PLL itself to produce metallic gold, which is then redeposited on the surface of the HGNPs, rendering the final shape: either nanorings or even spheres depending on the contact time. We investigate locally the plasmonic response of these nanostructures by electron energy loss spectroscopy (EELS). The plasmon excitations are interpreted by discrete dipole approximation (DDA) simulations. We demonstrate that, thanks to this controlled top-down morphological modification, a fine-tuning of the optical response is possible. Unlike the traditional lithographic techniques, this has been achieved in a controlled manner using wet chemistry, enabling the potential use of these nanostructures for a broad range of plasmonic applications, including biomedicine, catalysis, and quantum communications., The TEM work was conducted in the Laborario de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA), Universidad de Zaragoza (Spain). Financial support from the EU thanks to the ERC Consolidator Grant Program (ERC-2013-CoG-614715, NANOHEDONISM) and the People Program (CIG-Marie Curie Actions, REA Grant Agreement No. 321642) are gratefully acknowledged. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483, ESTEEM2 (Integrated Infrastructure Initiative, I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). This research used resources of the “Plateforme Technologique de Calcul Intensif (PTCI)” (http://www.ptci.unamur.be) located at the University of Namur, Belgium, which is supported by the F.R.S.-FNRS under the Convention No. 2.4520.11. The PTCI is member of the “Consortium des Équipements de Calcul Intensif (CÉCI)” (http://www.ceci-hpc.be)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoengineering a library of metallic nanostructures using a single microfluidic reactor

  • Sebastián, Víctor
  • Jensen, Klavs F.
Microfluidic synthesis in a microfabricated reactor enables fast and facile synthesis of a wide library of metallic nanostructures: monometallic, bimetallic, anisotropic growth and heterostructures. Specific nanostructures are realized by selection of flow pattern and synthesis parameters. The technique is shown to have advantages over conventional batch technologies. Not only does it allow faster scalable synthesis, but also realization of nanostructures hitherto not reported such as Pt-Ru, Pt-Ni and Pt-Co nanodendrites, Pt-Pd heterostructures, Ag-Pd core-shell NPs, Au-Pd nanodumbbells and Au-Pd nanosheets., Authors acknowledge US NSF grant (CHE-0714189) for funding this research, and the MRSEC Shared Experimental Facilities at MIT, supported by the National Science Foundation under award number DMR-1419807 V. S. acknowledges the support of the Fulbright Commission and the Ministry of Education in Spain (Programa Nacional de Movilidad de Recursos Humanos. del Plan Nacional de I + D + I 2008–2011), as well as People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel anisotropic magnetoelectric effect on δ-FeO(OH)/P(VDF-TrFE) multiferroic composites

  • Martins, Pedro
  • Larrea, Ángel
  • Gonçalves, R.
  • Botelho, Gabriela
  • Ramana, E. V.
  • Mendiratta, S. K.
  • Sebastián, Víctor
  • Lanceros-Méndez, Senentxu
The past decade has witnessed increased research effort on multiphase magnetoelectric (ME) composites. In this scope, this paper presents the application of novel materials for the development of anisotropic magnetoelectric sensors based on δ-FeO(OH)/P(VDF-TrFE) composites. The composite is able to precisely determine the amplitude and direction of the magnetic field. A new ME effect is reported in this study, as it emerges from the magnetic rotation of the δ-FeO(OH) nanosheets inside the piezoelectric P(VDF-TrFE) polymer matrix. δ-FeO(OH)/P(VDF-TrFE) composites with 1, 5, 10, and 20 δ-FeO(OH) filler weight percentage in three δ-FeO(OH) alignment states (random, transversal, and longitudinal) have been developed. Results have shown that the modulus of the piezoelectric response (10-24 pC·N(-1)) is stable at least up to three months, the shape and magnetization maximum value (3 emu·g(-1)) is dependent on δ-FeO(OH) content, and the obtained ME voltage coefficient, with a maximum of ∼0.4 mV·cm(-1)·Oe(-1), is dependent on the incident magnetic field direction and intensity. In this way, the produced materials are suitable for innovative anisotropic sensor and actuator applications., This work is funded by FEDER funds through the Programa Operacional Factores de Competitividade–COMPETE and by national funds from FCT–Fundação para a Ciência e a Tecnologia, in the framework of the Strategic Project PEST-C/FIS/UI607/2014 and PEST-C/QUI/UI0686/2014. The authors also thank funding from Matepro–Optimizing Materials and Processes, ref NORTE-07-0124-FEDER-000037, cofunded by the Programa Operacional Regional do Norte (ON.2, O Novo Norte), under the Quadro de Referência Estratégico Nacional (QREN), through the Fundo Europeu de Desenvolvimento Regional (FEDER). P.M. and R.G. also acknowledge support from FCT (SFRH/BPD/96227/2013 and SFRH/BD/88397/2012 grants, respectively). V.S. gratefully acknowledges the EU CIG–Marie Curie under the REA grant agreement no. 321642., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

  • Cacho-Bailo, Fernando
  • Matito-Martos, Ismael
  • Perez-Carbajo, Julio
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Sebastián, Víctor
  • Calero, Sofía
  • Téllez, Carlos
  • Coronas, Joaquín
All publication charges for this article have been paid for by the Royal Society of Chemistry., Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA, T05) and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. acknowledges his DGA predoctoral fellowship. V. S. acknowledges the support of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642). I. M.-M. thanks the Spanish MINECO for his predoctoral fellowship. The European Research Council through an ERC Grant (ERC2011-StG-279520-RASPA) is also acknowledged. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA). The authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Perspective article: Flow synthesis of functional materials

  • Sebastián, Víctor
  • Khan, Saif A.
  • Kulkarni, Amol A.
Continuous-flow synthesis of specific functional materials is now seen as a reliable synthesis approach that gives consistent product properties. This perspective article aims to survey recent work in some of the relevant areas and to identify new domains where flow synthesis of functional materials can be better than the conventional synthesis methods. It also emphasizes the need for developing high-throughput integrated synthesis and screening systems for almost all functional materials so that laboratory-scale recipes can be transformed into reliable manufacturing processes. New areas relevant to functional materials which have remained unexplored in flow synthesis are also highlighted., A.A.K. acknowledges the funding from the Department of Science and Technology (GoI)'s Advanced Manufacturing Technologies (AMT) scheme. V.S. acknowledges the funding from CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymeric nanomaterials as nanomembrane entities for biomolecule and drug delivery

  • Albisa, Airama
  • Español, Laura
  • Prieto, Martín
  • Sebastián, Víctor
[Background]: Bio-nanomaterials assembled into nanomembrane entities are actively studied to circumvent the uncontrollable list of shortcomings of conventional delivery systems: low water solubility, unfavorable stability, short circulation time in plasma, rapid clearance from the human body, poor bioavailability, non-specific toxicity against normal tissue and cells, low cellular uptake and susceptibility to enzyme degradation. Basically, these nanoentities enable to exploit the therapeutic value of many promising biomolecules and drugs (B&D), controlling the mass transport of B&D at a certain rate or even on demand if a stimulus is applied. The large surface-to-volume ratio of bio-nanomaterials as well as their tunable properties enable to increase the biocompatibility, bioavailability, solubility and permeability of many unique B&D which are otherwise difficult to deliver., [Results]: This review paper will focus on the last advances of bio-nanomaterials applied as nanomembranes in biomolecule and drug delivery, as well as their more remarkable properties and applications in biomedicine., [Conclusion]: New advances have been drastically established in the production of smart nanomembranes that alter their own structure and function in response to the environment. These new insights have been used for the production of smart drug delivery nanomembranes. These nanomembranes entities have the potential to revolutionize the biomedicine but there are still some shortcomings to address in order to translate the laboratory production to the clinic., The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the Government of Aragon and the European Social Fund are gratefully acknowledged. A.A. acknowledges the PhD grant under the Program Erasmus Mundus Doctorate in Membrane Engineering-EUDIME (2011-0014)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation of Drug-Loaded PLGA-PEG Nanoparticles by Membrane-Assisted Nanoprecipitation

  • Albisa, Airama
  • Piacentini, Emma
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Santamaría, Jesús
  • Giorno, Lidietta
[Purpose] The aim of this work is to develop a scalable continuous system suitable for the formulation of polymeric nanoparticles using membrane-assisted nanoprecipitation. One of the hurdles to overcome in the use of nanostructured materials as drug delivery vectors is their availability at industrial scale. Innovation in process technology is required to translate laboratory production into mass production while preserving their desired nanoscale characteristics., [Methods] Membrane-assisted nanoprecipitation has been used for the production of Poly[(D,L lactide-co-glycolide)-co-poly ethylene glycol] diblock) (PLGA-PEG) nanoparticles using a pulsed back-and-forward flow arrangement. Tubular Shirasu porous glass membranes (SPG) with pore diameters of 1 and 0.2 μm were used to control the mixing process during the nanoprecipitation reaction., [Results] The size of the resulting PLGA-PEG nanoparticles could be readily tuned in the range from 250 to 400 nm with high homogeneity (PDI lower than 0.2) by controlling the dispersed phase volume/continuous phase volume ratio. Dexamethasone was successfully encapsulated in a continuous process, achieving an encapsulation efficiency and drug loading efficiency of 50% and 5%, respectively. The dexamethasone was released from the nanoparticles following Fickian kinetics., [Conclusions] The method allowed to produce polymeric nanoparticles for drug delivery with a high productivity, reproducibility and easy scalability., The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) and the ERC Consolidator Grant program (ERC-2013-CoG-614,715, NANOHEDONISM), the Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. Program Erasmus Mundus Doctorate in Membrane Engineering-EUDIME (2011–0014) is grate fully acknowledged. The authors acknowledge the European Union, FESR, MIUR, MSE for the financial support to the project PON Olio Più - PON01_01545, within the framework PON Ricerca e Competitività 2007–2013., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pumping metallic nanoparticles with spatial precision within magnetic mesoporous platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, Nuria
  • Martínez, Gema
  • Sebastián, Víctor
  • Malumbres, Ana
  • Florea, Ileana
  • Arenal, Raúl
  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Santamaría, Jesús
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle–wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes., Financial support from MINECO (Spain) and the CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon”—Universidad de Zaragoza. V.S. and J.L.H. acknowledge the support of the People Program (CIG-Marie Curie Actions, REA grant agreement nos. 321642 and 294094). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reaction engineering strategies for the production of inorganic nanomaterials

  • Sebastián, Víctor
  • Arruebo, Manuel
  • Santamaría, Jesús
The rapid expansion of nanotechnology requires scaled-up production rates to cope with increased nanomaterials demand. However, in many cases, the final uses of nanomaterials impose strict requisites on their physical and chemical characteristics including size, shape, chemical composition and type of functional groups on their surface. Frequently, additional features such as a limited degree of agglomeration are also demanded. These requisites represent a serious challenge to present-day synthesis methods when nanomaterials must be produced in large amounts. Some of the possible solutions from the reaction engineering perspective are discussed in this work for both gas and liquid phase production processes. Special attention will be devoted to enabling technologies, which allow the production of engineered nanoparticles with limited aggregation and with a good control on their nano-scale characteristics., Financial support from MINECO, Spain (MAT2011–24988 grant), People Program (CIG-Marie Curie Actions) of the EU under REA grant agreement n° Financial support from MINECO, Spain (MAT2011–24988 grant), People Program (CIG-Marie Curie Actions) of the EU under REA grant agreement n° 321642 and from ERC Advanced Grant (ERC-AdG-267626, HECTOR) is gratefully acknowledged.and from ERC Advanced Grant (ERC-AdG-267626, HECTOR) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scaled-up production of plasmonic nanoparticles using microfluidics: From metal precursors to functionalized and sterilized nanoparticles

  • Gomez, Leyre
  • Sebastián, Víctor
  • Irusta, Silvia
  • Ibarra, Alfonso
  • Arruebo, Manuel
  • Santamaría, Jesús
An exquisite control of synthesis parameters is generally required in nanomaterial synthesis to guarantee consistency in the essential characteristics such as size and shape. On the other hand, reliable scaled-up production of nanomaterials is required in order to achieve the production rates required for emerging nanotechnology applications while delivering a consistent product with the intended characteristics, avoiding the traditional batch-to-batch deviations. The continuous production of nanomaterials is challenging because of the difficulties involved in translating the complexity of nanomaterial synthesis into on-line operations. In this regard, microfluidic platforms stand out over conventional batch reactors due to their superior performance, easy scalability and reliability. Here, a continuous, scaled-up synthesis of high quality plasmonic hollow gold nanoparticles is reported for the first time. Not only was the throughput significantly higher than in a batch reactor, but also the microfluidic system allowed the on-line implementation of two new stages in nanomaterial production: surface functionalization and sterilization., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the MAT2011-24988 grant. The ERC (Advanced Grant HECTOR) and People Program (Marie Curie Actions) of the EU under the REA grant agreement no. 321642 are also gratefully acknowledged. A. I. acknowledges the Gobierno de Aragón (grants E81) and the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shape-controlled continuous synthesis of metal nanostructures

  • Sebastián, Víctor
  • Smith, Christopher D.
  • Jensen, Klavs F.
A segmented flow-based microreactor is used for the continuous production of faceted nanocrystals. Flow segmentation is proposed as a versatile tool to manipulate the reduction kinetics and control the growth of faceted nanostructures; tuning the size and shape. Switching the gas from oxygen to carbon monoxide permits the adjustment in nanostructure growth from 1D (nanorods) to 2D (nanosheets). CO is a key factor in the formation of Pd nanosheets and Pt nanocubes; operating as a second phase, a reductant, and a capping agent. This combination confines the growth to specific structures. In addition, the segmented flow microfluidic reactor inherently has the ability to operate in a reproducible manner at elevated temperatures and pressures whilst confining potentially toxic reactants, such as CO, in nanoliter slugs. This continuous system successfully synthesised Pd nanorods with an aspect ratio of 6; thin palladium nanosheets with a thickness of 1.5 nm; and Pt nanocubes with a 5.6 nm edge length, all in a synthesis time as low as 150 s., Authors acknowledge US NSF grant (CHE-0714189) for funding this research, and the MRSEC Shared Experimental Facilities at MIT, supported by the National Science Foundation under award number DMR-1419807 V. S. acknowledges the support of the Fulbright Commission and the Ministry of Education in Spain (Programa Nacional de Movilidad de Recursos Humanos del Plan Nacional de I+D+I 2008–2011), as well as well as People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spontaneous formation of Au-Pt alloyed nanoparticles using pure nano-counterparts as starters: A ligand and size dependent process

  • Usón, Laura
  • Sebastián, Víctor
  • Mayoral, Álvaro
  • Hueso, José L.
  • Eguizabal, Adela
  • Arruebo, Manuel
  • Santamaría, Jesús
In this work we investigate the formation of PtAu monodisperse alloyed nanoparticles by ageing pure metallic Au and Pt small nanoparticles (sNPs), nanoparticle size <5 nm, under certain conditions. We demonstrate that those bimetallic entities can be obtained by controlling the size of the initial metallic sNPs separately prepared and by selecting their appropriate capping agents. The formation of this spontaneous phenomenon was studied using HR-STEM, EDS, ionic conductivity, UV-Vis spectroscopy and cyclic voltammetry. Depending on the type of capping agent used and the size of the initial Au sNPs, three different materials were obtained: (i) AuPt bimetallic sNPs showing a surface rich in Au atoms, (ii) segregated Au and Pt sNPs and (iii) a mixture of bimetallic nanoparticles as well as Pt sNPs and Au NPs. Surface segregation energies and the nature of the reaction environment are the driving forces to direct the distribution of atoms in the bimetallic sNPs. PtAu alloyed nanoparticles were obtained after 150 h of reaction at room temperature if a weak capping agent was used for the stabilization of the nanoparticles. It was also found that Au atoms diffuse towards Pt sNPs, producing a surface enriched in Au atoms. This study shows that even pure nanoparticles are prone to be modified by the surrounding nanoparticles to give rise to new nanomaterials if atomic diffusion is feasible., The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) and the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) are gratefully acknowledged. J.L.H. is thankful to the Juan de la Cierva Program of the Spanish Government. A.M. thanks the European Union Seventh Frame-work Programme under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and size dependent magnetostrictive response of ferrite nanoparticles and their application in magnetoelectric polymer-based multiferroic sensors

  • Gonçalves, R.
  • Larrea, Ángel
  • Sebastián, M. S.
  • Sebastián, Víctor
  • Martins, Pedro
  • Lanceros-Méndez, Senentxu
This work shows that it is possible to synthesize, chemically tailor and optimize the magnetostriction of ferrite nanoparticles and improve the magnetoelectric (ME) response of their multiferroic composites. Thus, Fe3O4 nanoparticles with different sizes have been synthesized by a solvothermal procedure and an oxidative hydrolysis method. The first method results in nanoparticles with 9 nm average size and 167 ppm magnetostriction; the second one in nanoparticles with average sizes of 30 nm and 50 nm and magnetostriction of 17 ppm and 26 ppm, respectively. Furthermore, Fe3O4/P(VDF-TrFE) multiferroic nanocomposites were produced with those nanoparticles, showing ME voltage coefficients (α31) of 920 μV cm−1 Oe−1, 100 μV cm−1 Oe−1 and 150 μV cm−1 Oe−1, respectively, for samples fabricated with nanoparticles with 9 nm, 30 nm and 50 nm average size. The high magnetostrictive response and the biocompatibility of ferrite nanoparticles, together with their anhysteretic magnetic response, enhance their application potential for biomedical applications as well as their use in high performance ME materials for sensors and actuators., The authors thank the FCT – Fundação para a Ciência e Tecnologia – for financial support in the framework of the Strategic Funding UID/FIS/04650/2013 and under project PTDC/EEI-SII/5582/2014. P. Martins and R. Gonçalves acknowledge also support from FCT (SFRH/BPD/96227/2013 and SFRH/BD/88397/2012 grants respectively). Financial support from the Basque Government Industry Department under the ELKARTEK program is also acknowledged. VS thanks The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the Government of Aragon, and the European Social Fund. The microscopy measurements have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon – Universidad de Zaragoza”. V. S. acknowledges the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of highly magnetostrictive nanostructures and their application in a polymer-based magnetoelectric sensing device

  • Gonçalves, R.
  • Larrea, Ángel
  • Zheng, T.
  • Higgins, Michael J.
  • Sebastián, Víctor
  • Lanceros-Méndez, Senentxu
  • Martins, Pedro
New anisotropic and highly magnetostrictive (λ = 507 ppm) Co(II)Fe(III)single bondO(OH) nanosheets were synthesized by a coprecipitation method using a modified gas-slugs microfluidic system. The magnetostrictive response of the Co(II)Fe(III)single bondO(OH) nanosheets, when coupled to the piezoelectric response of P(VDF-TrFE), d33 = −30 ± 1 pC·N−1, leads to a maximum magnetoelectric coupling α31 of 5.10 mV·cm−1·Oe−1. The observed anisotropy in the magnetoelectric (ME) magnetic sensing mechanism combined with a new highly magnetostrictive Co(II)Fe(III)single bondO(OH) nanostructures and good linearity of the developed ME sensor (r2 value = 0.995) not only allows the tailoring of the ME response for anisotropic polymer-based device applications such as digital compasses or GPS devices but also open new application directions such as actuators and in the biomedical field., The authors thank the FCT – Fundação para a Ciência e Tecnologia – for financial support in the framework of the Strategic Funding UID/FIS/04650/2013 and under project PTDC/EEI-SII/5582/2014. P. Martins and R. Gonçalves acknowledges also support from FCT (SFRH/BPD/96227/2013 and SFRH/BD/88397/2012 grants respectively). V.S. gratefully acknowledges the EU CIG–Marie Curie under the REA grant agreement no. 321642. The authors thank financial support from the Basque Government Industry Department under the ELKARTEK Program. SLM thanks the Diputación de Bizkaia for financial support under the Bizkaia Talent program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tackling microbial infections and increasing resistance involving formulations based on antimicrobial polymers

  • Kyzioł, Agnieszka
  • Khan, Wahid
  • Sebastián, Víctor
  • Kyzioł, Karol
Antimicrobial polymers (APs) are the new type of disinfectants, which can be used in some cases as an alternative to nowadays overused antibiotics. This review presents the most prognostic approaches in tackling infections and drug resistance with application of antimicrobial polymers. We describe membrane-active formulations composed of antimicrobial polymers with attention paid to drug delivery systems and selected methods of visualization of the antimicrobial effect. Importantly, antimicrobial polymers can not only be used independently but as well they can be tethered to surfaces without losing their biological activity. The latter approach enables the design of surfaces that (i) inactivate microbes even without releasing additional biocides or (ii) enhance antimicrobial activity of these biocides acting by additive or synergistic effect. One of the hallmarks of APs is their low susceptibility to the current and/or emerging resistance mechanisms. Simplicity of modulation of the antimicrobial activity by easy changes in their structures and the related optimization of biological potential make the formulations composed of antimicrobial polymers clinically relevant materials., Victor Sebastian acknowledges the support from CIG-Marie Curie Actions (REA grant agreement no. 321642). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards the continuous production of Pt-based heterogeneous catalysts using microfluidic systems

  • Usón, Laura
  • Arruebo, Manuel
  • Sebastián, Víctor
The continuous production of Pt-based heterogeneous catalysts based on ultra-small (<2 nm) noble metal nanoparticles deposited on mesoporous ordered silica and their catalytic activity in VOC abatement are here reported. Microfluidic reactors can be used not only to enable the fast and controlled production of ultra-small Pt nanoparticles (NPs), but also alloyed NPs including PtPd, PtRu and PtRh can be formed in short residence times (between 60 s and 5 min). A novel continuous and homogeneous loading of these catalytic NPs on SBA-15 used as a mesoporous support is also here reported. This procedure eases the NP loading and minimizes washing post-treatments. A 12-fold decrease in the synthesis time was obtained when using this microfluidic reactor compared to the traditional batch production of Pt NPs. Microflow and batch type reactors yielded a Pt precursor conversion to generate Pt NPs with a 90% and 85% yield, respectively. Under the same conditions, the productivity of the microfluidic system (27 mg Pt NPs per h) was twice the one achieved in the conventional batch type reactor. The catalytic performance of the supported catalysts separately prepared by microfluidics and by conventional impregnation under the same conditions and with the same noble metal loading was also compared in the n-hexane abatement as a model of VOCs. Both catalysts were active in the VOC oxidation reaction but a 95% reduction in the catalyst synthesis time was obtained when using the catalysts produced in the microfluidic platform. For this reaction a long-term activity test was successfully carried out at 175 °C during 30 h on stream using the heterogeneous catalyst prepared by using the flow reactor., Financial support from the ERC Consolidator Grant ((ERC-2013-CoG-614715, NANOHEDONISM) and People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with the assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasmall platinum nanoparticles on Fe3O4: A low-temperature catalyst for the preferential oxidation reaction

  • López, Angela
  • Larrea, Ane
  • Sebastián, Víctor
  • Calatayud, M. Pilar
  • Irusta, Silvia
  • Santamaría, Jesús
Preferential oxidation (PROX) of CO in H2-rich stream is critical to the production of clean H2 for H2-based fuel cells. A low-temperature fuel-cell start up is desirable for transportation applications. However, few catalysts are able to provide the required sustained activity at near-room-temperature conditions. The development of highly active and selective PROX catalysts is highly desirable but has been proven to be extremely challenging. Pt nanoparticles with a size of (1.2±0.1) nm were synthesized in situ on 32 nm magnetite nanoparticles, which were previously deposited on alumina supports. The resulting catalyst was found to be highly active towards the preferential oxidation of CO in a H2-rich reformate stream and gave 100 % CO conversion at 25 °C with a weight hourly space velocity of 0.5 mL min−1 mg−1 and an oxygen excess factor (λ) of 2., The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), the ERC Advanced Grant program (ERC-Grant Agreement N°267626, HECTOR), the Government of Aragon, and the European Social Fund are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding nucleation of the electroactive β-phase of poly(vinylidene fluoride) by nanostructures

  • Sebastián, M. S.
  • Larrea, Ángel
  • Gonçalves, R.
  • Alejo, Teresa
  • Vilas-Vilela, José L.
  • Sebastián, Víctor
  • Martins, Pedro
  • Lanceros-Méndez, Senentxu
β-Poly(vinylidene fluoride) (PVDF) is of large technological relevance due to its piezoelectric, pyroelectric and/ferroelectric properties. In this way, a variety of methods have been developed to obtain such electroactive β-phase, being the addition of fillers one of the most popular, upscalable and innovative methods. The electrostatic interaction between negative charged fillers with the CH2 groups having a positive charge density has been the most widely accepted mechanism for the direct formation of polar β-phase on nanocomposites. Nevertheless some controversy remains in this matter as the dominating crystallization into the β-phase within PVDF is sometimes attributed to the interaction between the positively charged surfaces of the fillers and the CF2 dipoles in PVDF. In order to clarify such a controversial issue, this work uses two types of nanostructures, Fe3O4 nanorods and Fe3O4 nanoparticles, with distinct sizes and surface charges to study, isolate and evaluate the effects of the different ion–dipole interactions and shapes on the crystalline structures of PVDF. As a result it is shown that in the case of positive ion–CF2 dipole based β-phase nucleation, and beyond the effect of the intermolecular interactions, the rod-shape optimizes the crystallization in the electroactive conformation, thus promoting current development in PVDF-based electroactive devices., The authors thank the FCT-Fundação para a Ciência e Tecnologia-for financial support in the framework of the Strategic Funding UID/FIS/04650/2013 and under project PTDC/EEI-SII/5582/2014. P. Martins and R. Gonçalves acknowledges also support from FCT (SFRH/BPD/96227/2013 and SFRH/BD/88397/2012 grants respectively). Financial support from the Basque Government Industry Department under the ELKARTEK Program is also acknowledged. VS thanks The People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) the Government of Aragon, and the European Social Fund., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A simple approach to obtain hybrid Au-loaded polymeric nanoparticles with a tunable metal load

  • Luque-Michel, E.
  • Larrea, A.
  • Lahuerta, C.
  • Sebastian, V.
  • Imbuluzqueta, E.
  • Arruebo, M.
  • Blanco-Prieto, M.
  • Santamaría, J.
A new strategy to nanoengineer multi-functional polymer-metal hybrid nanostructures is reported. By using this protocol the hurdles of most of the current developments concerning covalent and non-covalent attachment of polymers to preformed inorganic nanoparticles (NPs) are overcome. The strategy is based on the in situ reduction of metal precursors using the polymeric nanoparticle as a nanoreactor. Gold nanoparticles and poly(dl-lactic-co-glycolic acid), PLGA, are located in the core and shell, respectively. This novel technique enables the production of PLGA NPs smaller than 200 nm that bear either a single encapsulated Au NP or several smaller NPs with tunable sizes and a 100% loading efficiency. In situ reduction of Au ions inside the polymeric NPs was achieved on demand by using heat to activate the reductive effect of citrate ions. In addition, we show that the loading of the resulting Au NPs inside the PLGA NPs is highly dependent on the surfactant used. Electron microscopy, laser irradiation, UV-Vis and fluorescence spectroscopy characterization techniques confirm the location of Au nanoparticles. These promising results indicate that these hybrid nanomaterials could be used in theranostic applications or as contrast agents in dark-field imaging and computed tomography.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Continuous microfluidic synthesis and functionalization of gold nanorods

  • Uson, L.
  • Sebastian, V.
  • Arruebo, M.
  • Santamaria, J.
A microfluidic platform with multiple reactant additions has been used for the continuous, unseeded synthesis of gold nanorods. This system allows separate control of the seed forming and nanorod growing stages, increasing reproducibility and reducing undesired effects related to a poor control of the seed aging stage. Also, on-stream surface functionalization with poly (ethylene glycol)-methyl ether thiol (SH-PEG) has been performed, allowing a 100-fold reduction in the consumption of this reactant compared to the amounts used in a conventional batch reactor. The system also facilitates tuning the concentration of halide anions (Cl- and Br-) that are used to modify the aspect ratio of the resulting rods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Spontaneous formation of Au-Pt alloyed nanoparticles using pure nano-counterparts as starters: a ligand and size dependent process

  • Uson, L.
  • Sebastian, V.
  • Mayoral, A.
  • Hueso, J. L.
  • Eguizabal, A.
  • Arruebo, M.
  • Santamaria, J.
In this work we investigate the formation of PtAu monodisperse alloyed nanoparticles by ageing pure metallic Au and Pt small nanoparticles (sNPs), nanoparticle size <5 nm, under certain conditions. We demonstrate that those bimetallic entities can be obtained by controlling the size of the initial metallic sNPs separately prepared and by selecting their appropriate capping agents. The formation of this spontaneous phenomenon was studied using HR-STEM, EDS, ionic conductivity, UV-Vis spectroscopy and cyclic voltammetry. Depending on the type of capping agent used and the size of the initial Au sNPs, three different materials were obtained: (i) AuPt bimetallic sNPs showing a surface rich in Au atoms, (ii) segregated Au and Pt sNPs and (iii) a mixture of bimetallic nanoparticles as well as Pt sNPs and Au NPs. Surface segregation energies and the nature of the reaction environment are the driving forces to direct the distribution of atoms in the bimetallic sNPs. PtAu alloyed nanoparticles were obtained after 150 h of reaction at room temperature if a weak capping agent was used for the stabilization of the nanoparticles. It was also found that Au atoms diffuse towards Pt sNPs, producing a surface enriched in Au atoms. This study shows that even pure nanoparticles are prone to be modified by the surrounding nanoparticles to give rise to new nanomaterials if atomic diffusion is feasible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas Slug Microfluidics: A Unique Tool for Ultrafast, Highly Controlled Growth of Iron Oxide Nanostructures

  • Larrea, A.
  • Sebastian, V.
  • Ibarra, A.
  • Arruebo, M.
  • Santamaria, J.
The use of nanomaterials in real life applications is often hampered by our inability to produce them in large quantities while preserving their desired properties in terms of size, shape, and crystalline phase. Here we present a novel continuous method to synthesize nanostructures with an unprecedented degree of control regarding their properties. In particular, the excellent properties of microreactors for chemical synthesis are enhanced by the introduction of gas slugs of tailored composition. Slug dynamics accelerate mixing, reduce processing times (from hours in batch processes to minutes or even seconds), and, depending on the gas atmosphere used, allows one to accurately control the crystalline phase and shape of the resulting nanostructures. Inert (N2), oxidizing (O2), or reducing (CO, H2) gases were used, leading to different morphologies and crystalline structures in a high yield, highly reproducible fabrication process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In-situ preparation of a highly accessible Pt/CNF catalytic layer on metallic microchannel reactors. Application to the SELOX reaction

  • Ramírez, A.
  • Sebastián, V.
  • Mallada, R.
  • Santamaría, J.
  • Monzón, A.
A general method to prepare a catalytic coating on the surface of stainless steel microreactors has been developed. The catalytic support consists of a layer of randomly oriented, highly accessible carbon nanofibers (CNFs), directly grown on the surface of the channels by chemical vapor deposition (CVD) of ethanol. These CNFs are functionalized to acquire a positive charge before a solution containing metallic nanoparticles (Pt) is flown through the channels. The nanoparticles adhere to the surface of the CNFs thanks to electrostatic interactions. This process is carried out in-situ and the method can be easily adapted to larger scale production. These catalyst-coated microchannel reactors have been tested in the selective oxidation (SELOX) of CO in the presence of H2. The results were compared to those obtained in a conventional fixed bed reactor packed with Pt/CNTs. The microreactor clearly outperformed the fixed bed reactor at the same space velocity (WSHV = 2220 l/h gPt),), achieving total CO conversion at temperatures 50ºC lower.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoengineering a library of metallic nanostructures using a single microfluidic reactor

  • Sebastián, V.
  • Jensen, K.F.
Microfluidic synthesis in a microfabricated reactor enables fast and facile synthesis of a wide library of metallic nanostructures: monometallic, bimetallic, anisotropic growth and heterostructures. Specific nanostructures are realized by selection of flow pattern and synthesis parameters. The technique is shown to have advantages over conventional batch technologies. Not only does it allow faster scalable synthesis, but also realization of nanostructures hitherto not reported such as Pt-Ru, Pt-Ni and Pt-Co nanodendrites, Pt-Pd heterostructures, Ag-Pd core-shell NPs, Au-Pd nanodumbbells and Au-Pd nanosheets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magneto-plasmonic nanoparticles as theranostic platforms for magnetic resonance imaging, drug delivery and NIR hyperthermia applications

  • Urries, I.
  • Muñoz, C.
  • Gomez, L.
  • Marquina, C.
  • Sebastian, V.
  • Arruebo, M.
  • Santamaria, J.
PEGylated magneto-plasmonic nanoparticles with a hollow or semi-hollow interior have been successfully synthesized and their physico-chemical characteristics have been investigated. The hollow interior space can be used to store drugs or other molecules of interest whereas magnetic characterization shows their potential as contrast agents in magnetic resonance imaging (MRI) applications. In addition, their plasmonic characteristics in the near infrared (NIR) region make them efficient in photothermal applications producing high temperature gradients after short irradiation times. We show that by controlling the etching conditions the inner silica shell can be selectively dissolved to achieve a hollow or semi-hollow interior without compromising the magnetic or plasmonic characteristics of the resulting nanoparticles. Magnetic measurements and transmission electron microscopy observations have been used to demonstrate the precise control during the etching process and to select an optimal concentration of the etching reagent and contact time to preserve the inner superparamagnetic iron oxide-based nanoparticles and the plasmonic properties of the constructs. Drug loading capabilities were also evaluated for both semi-hollow and as-synthesized nanoparticles using Rhodamine B isothiocyanate as a model compound. The nanoparticles produced could be potentially used as “theranostic” nanoparticles with both imaging capabilities and a dual therapeutic function (drug delivery and hyperthermia).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Morphological tunability of the plasmonic response: From hollow gold nanoparticles to gold nanorings

  • Prieto, M.
  • Arenal, R.
  • Henrard, L.
  • Gomez, L.
  • Sebastian, V.
  • Arruebo, M.
The optical and morphological properties of hollow gold nanoparticles (HGNPs) can be finely modified by employing poly-l-lysine hydrobromide (PLL), a homopoly amino acid of the l-lysine, used as reducer and stabilizer. We demonstrate that the reshaping of these plasmonic hollow nanostructures responds to an Ostwald ripening process in which the initial HGNPs dissolve under the acidic conditions provided by the PLL generating chloroaurate ions. These ions are then reduced by the primary amines of the PLL itself to produce metallic gold, which is then redeposited on the surface of the HGNPs, rendering the final shape: either nanorings or even spheres depending on the contact time. We investigate locally the plasmonic response of these nanostructures by electron energy loss spectroscopy (EELS). The plasmon excitations are interpreted by discrete dipole approximation (DDA) simulations. We demonstrate that, thanks to this controlled top-down morphological modification, a fine-tuning of the optical response is possible. Unlike the traditional lithographic techniques, this has been achieved in a controlled manner using wet chemistry, enabling the potential use of these nanostructures for a broad range of plasmonic applications, including biomedicine, catalysis, and quantum communications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dual encapsulation of hydrophobic and hydrophilic drugs in PLGA nanoparticles by a single-step method: Drug delivery and cytotoxicity assays

  • Español, L.
  • Larrea, A.
  • Andreu, V.
  • Mendoza, G.
  • Arruebo, M.
  • Sebastian, V.
  • Aurora-Prado, M.S.
  • Kedor-Hackmann, E.R.M.
  • Santoro, M.I.R.M.
  • Santamaria, J.
Dual drug encapsulation in biodegradable nanoparticles is always challenging and often requires strenuous optimization of the synthesis-encapsulation processes. This becomes even more difficult when the simultaneous encapsulation of molecules of different polarity is sought. Here we present a modified emulsification-evaporation process to produce polymeric nanoparticles (NPs) made of the biocompatible and biodegradable polymer poly(lactic-co-glycolic acid) (PLGA) and co-encapsulating simultaneously two different drugs, the hydrophobic dexamethasone (DX) and the hydrophilic diclofenac sodium (DS). Three independent processing parameters were systematically modified to promote the incorporation of the different-polarity drugs into PLGA and to control the particle size under 150 nm. The careful selection of the appropriate solvents (ethyl acetate and methanol) was a key requirement for the successful encapsulation of DX and DS. DS and DX release kinetics as well as cytotoxicity assays underlined the therapeutic potential of the dual encapsulation strategy. © 2016 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

  • Cacho Bailo, Fernando
  • Matito-Martos, Ismael
  • Pérez-Carbajo, Julio
  • Etxeberría-Benavides, Miren
  • Karvan, Oguz
  • Sebastián, Víctor
  • Calero, Sofía
  • Téllez, Carlos
  • Coronas, Joaquín
Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pumping Metallic Nanoparticles with Spatial Precision within Magnetic Mesoporous Platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, N.
  • Martinez, G.
  • Sebastian, V.
  • Malumbres, A.
  • Florea, I.
  • Arenal, R.
  • Ortega-Liebana, M.C.
  • Hueso, J.L.
  • Santamaria, J.
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle-wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microfluidic Continuous Approaches to Produce Magnetic Nanoparticles with Homogeneous Size Distribution

  • Larrea, A.
  • Sebastian, V.
  • Arruebo, M.
  • Santamaria, J.
We present a gas-liquid microfluidic system as a reactor to obtain magnetite nanoparticles with an excellent degree of control regarding their crystalline phase, shape and size. Several types of microflow approaches were selected to prevent nanomaterial aggregation and to promote homogenous size distribution. The selected reactor consists of a mixer stage aided by ultrasound waves and a reaction stage using a N2-liquid segmented flow to prevent magnetite oxidation to non-magnetic phases. A milli-fluidic reactor was developed to increase the production rate where a magnetite throughput close to 450 mg/h in a continuous fashion was obtained.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Preparation of Drug-Loaded PLGA-PEG Nanoparticles by Membrane-Assisted Nanoprecipitation

  • Albisa, A.
  • Piacentini, E.
  • Sebastian, V.
  • Arruebo, M.
  • Santamaria, J.
  • Giorno, L.
Purpose: The aim of this work is to develop a scalable continuous system suitable for the formulation of polymeric nanoparticles using membrane-assisted nanoprecipitation. One of the hurdles to overcome in the use of nanostructured materials as drug delivery vectors is their availability at industrial scale. Innovation in process technology is required to translate laboratory production into mass production while preserving their desired nanoscale characteristics. Methods: Membrane-assisted nanoprecipitation has been used for the production of Poly(D, L lactide-co-glycolide)-co-poly ethylene glycol] diblock) (PLGA-PEG) nanoparticles using a pulsed back-and-forward flow arrangement. Tubular Shirasu porous glass membranes (SPG) with pore diameters of 1 and 0.2 µm were used to control the mixing process during the nanoprecipitation reaction. Results: The size of the resulting PLGA-PEG nanoparticles could be readily tuned in the range from 250 to 400 nm with high homogeneity (PDI lower than 0.2) by controlling the dispersed phase volume/continuous phase volume ratio. Dexamethasone was successfully encapsulated in a continuous process, achieving an encapsulation efficiency and drug loading efficiency of 50% and 5%, respectively. The dexamethasone was released from the nanoparticles following Fickian kinetics. Conclusions: The method allowed to produce polymeric nanoparticles for drug delivery with a high productivity, reproducibility and easy scalability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Uson, Laura
  • Hueso, José L.
  • Sebastian, Víctor
  • Arenal, Raul
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaria, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Efficient production of hybrid bio-nanomaterials by continuous microchannel emulsification: Dye-doped SiO2 and Au-PLGA nanoparticles

  • Larrea, A.
  • Clemente, A.
  • Luque-Michel, E.
  • Sebastian, V.
A novel microfluidic system was designed to produce in a continuous manner hybrid nanomaterials using the microchannel double w/o/w emulsification technique. Double w/o/w nanoemulsions were produced combining two inter-digital micromixers that afford working in continuous flow and with a high reproducibility and control on the reaction conditions. High throughput production of two hybrid nanomaterials, dye-doped SiO2 (4 mg/min) and Au-loaded poly(lactic-co-glycolic) acid (PLGA) (168 mg/min) nanoparticles, were achieved, showing the resulting nanomaterials excellent and reproducible optical properties and tunable loading. These hybrid nanomaterials could be potentially used in different biomedical applications. In addition, the microfluidic system designed for carrying out double emulsification enabled to decrease the particle size distribution of dye-doped SiO2 nanoparticles (NPs) up to 20 nm and to improve the Au NPs loading efficiency in Au-loaded PLGA hybrid nanoparticles. The excellent control achieved in the Au NPs loading allowed tuning the payload on demand. Finally, the microfluidic system designed in this work overpasses the productivity described in previously published batch-type reactors, while assuring the same properties of the resulting hybrid nanomaterials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Perspective Article: Flow Synthesis of Functional Materials

  • Sebastian, V.
  • Khan, S.A.
  • Kulkarni, A.A.
Continuous-flow synthesis of specific functional materials is now seen as a reliable synthesis approach that gives consistent product properties. This perspective article aims to survey recent work in some of the relevant areas and to identify new domains where flow synthesis of functional materials can be better than the conventional synthesis methods. It also emphasizes the need for developing high-throughput integrated synthesis and screening systems for almost all functional materials so that laboratory-scale recipes can be transformed into reliable manufacturing processes. New areas relevant to functional materials which have remained unexplored in flow synthesis are also highlighted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single phase microreactor for the continuous, high-temperature synthesis of <4¿nm superparamagnetic iron oxide nanoparticles

  • Uson, L.
  • Arruebo, M.
  • Sebastian, V.
  • Santamaria, J.
The reproducibility of key nanomaterial features is essential in nanomedicine applications where small changes of physical characteristics often lead to a very different behavior. In this regard, continuous microreactors are often advocated as a means to achieve highly precise synthesis of nanomaterials. However, when the synthesis must take place at high temperatures the use of these devices becomes restricted in terms of materials and practical problems (e.g. plugging of microchannels). Here we present the continuous synthesis of ultrasmall superparamagnetic iron oxide nanoparticles (SPIONs) through a polyol-based process at high temperatures (>200 °C). The microfluidic reactor designed allows SPION production at residence times under 1 min, was able to work continuously for 8 h without channel blockage and reached high production yields by coupling microreactors using stacked plates. The effect of operating conditions was optimized to produce homogeneous particles with a narrow particle size distribution. In summary, the microreactor developed in this work enables easy-to scale up, reproducible continuous production of SPIONs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards the continuous production of Pt-based heterogeneous catalysts using microfluidic systems

  • Usón, L.
  • Arruebo, M.
  • Sebastian, V.
The continuous production of Pt-based heterogeneous catalysts based on ultra-small (<2 nm) noble metal nanoparticles deposited on mesoporous ordered silica and their catalytic activity in VOC abatement are here reported. Microfluidic reactors can be used not only to enable the fast and controlled production of ultra-small Pt nanoparticles (NPs), but also alloyed NPs including PtPd, PtRu and PtRh can be formed in short residence times (between 60 s and 5 min). A novel continuous and homogeneous loading of these catalytic NPs on SBA-15 used as a mesoporous support is also here reported. This procedure eases the NP loading and minimizes washing post-treatments. A 12-fold decrease in the synthesis time was obtained when using this microfluidic reactor compared to the traditional batch production of Pt NPs. Microflow and batch type reactors yielded a Pt precursor conversion to generate Pt NPs with a 90% and 85% yield, respectively. Under the same conditions, the productivity of the microfluidic system (27 mg Pt NPs per h) was twice the one achieved in the conventional batch type reactor. The catalytic performance of the supported catalysts separately prepared by microfluidics and by conventional impregnation under the same conditions and with the same noble metal loading was also compared in the n-hexane abatement as a model of VOCs. Both catalysts were active in the VOC oxidation reaction but a 95% reduction in the catalyst synthesis time was obtained when using the catalysts produced in the microfluidic platform. For this reaction a long-term activity test was successfully carried out at 175 °C during 30 h on stream using the heterogeneous catalyst prepared by using the flow reactor.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

The Effect of Hydrogen Peroxide on the synthesis of Terephthalate-Based metal-organic frameworks

  • Monteagudo-Olivan, Rebeca
  • Jiménez-Fernández, Isabel
  • López-Ram-de-Viu, Pilar
  • Sebastian, Víctor
  • Coronas, Joaquín
Metal-organic frameworks (MOFs) are versatile materials for applications in fields including the environment, energy and health. A synthetic route for improving the formation of MOFs has been developed and is triggered by hydrogen peroxide (H2O2) to promote the formation of terephthalate-based MOFs of MIL-53 and MIL-68 types, specifically those made from Fe3+ and Al3+ and mixtures of both. Different characterization techniques (TGA, XRD, SEM, TEM, N2 porosimetry and Raman, mass and NMR spectroscopies) gave insights into the effect of H2O2 on the MOF synthesis. The reaction yield was significantly improved (the highest yield being 74 % for MIL-53(Al)), while crystallinity and N2 adsorption properties were mostly maintained for phases based on Al and Al/Fe. Furthermore, a reaction mechanism was envisaged from the mass spectroscopic analysis of the reaction solutions, thus suggesting that H2O2 plays the role of a µ-hydroxo bridge promoter, favoring the link between terephthalate ligands and aluminum-containing species to give rise to the µ-carboxylate bridges, leading to a faster growth of the final MOF, and offering a novel MOF synthesis approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insights into the mechanism of the formation of noble metal nanoparticles by: In situ NMR spectroscopy

  • Mateo, J.M.
  • Hoz, A.D.L.
  • Usón, L.
  • Arruebo, M.
  • Sebastian, V.
  • Gomez, M.V.
High-resolution solution Nuclear Magnetic Resonance (NMR) spectroscopy has been used to gain insights into the mechanism of the formation of gold, platinum and gold-platinum alloyed nanoparticles using metal precursors and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as starting materials. THPC is widely used in nanochemistry as a reductant and stabilizer of nanoparticles, however the identity of the species responsible for each role is unknown. The multinuclear study of the reaction media by NMR spectroscopy allowed us to elucidate the structure of all the compounds that participate in the transformation from the metal salt precursor to the reduced metal that forms the nanoparticle, thus clarifying the controversy found in the literature regarding the formation of THPC-based compounds. The progress of the reaction was monitored from the initial moments of the synthesis to the end of the reaction and after long periods of time. Insights into the dual role of THPC were gained, identifying methanol and hydrogen as the actual reducing agents, and tris(hydroxymethyl)phosphine oxide (THPO) as the real stabilizing agent. Finally, the different stabilities of gold and platinum nanoparticles can be attributed to the different catalytic activities of the metals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Feroxyhyte nanoflakes coupled to up-converting carbon nanodots: a highly active, magnetically recoverable, Fenton-like photocatalyst in the visible-NIR range

  • Ortega-Liebana, M. C.
  • Hueso, J. L.
  • Larrea, A.
  • Sebastián, V.
  • Santamaría, J.
We demonstrate the enhanced photocatalytic response of a novel Fenton-like heterogeneous catalyst obtained through the assembly of superparamagnetic feroxyhyte nanoflakes synthesized by continuous gas-slug microfluidics and carbon nanodots obtained by pyrolysis from a natural organic source. The novel nanohybrids enable the utilization of the visible and near-infrared ranges due to the active role of the carbon nanodots as up-converting photo-sensitizers. This novel photocatalyst is magnetically recoverable and maintains an excellent response after multiple reutilization cycles. In addition, its synthesis is based on inexpensive and abundant raw materials and its photocatalytic response is evaluated in the presence of energy efficient, affordable light-emitting diodes (LEDs), thereby providing a promising and feasible alternative to the homogeneous Fenton process.