Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient and facile tuning of Vulcan XC72 with ultra-small Pt nanoparticles for electrocatalytic applications

  • Eguizabal, Adela
  • Usón, Laura
  • Sebastián, Víctor
  • Hueso, José L.
  • Pina, María Pilar
In this work, we report the synergic combination of tiny, reproducible, and crystalline platinum nanoparticles with functionalized Vulcan XC72 support for the preparation of efficient electrocatalysts. The morphology and crystallinity of Pt NPs, the amination of carbon support and the Pt loading have been properly evaluated by TEM, STEM, ATR-FTIR, XPS and microwave plasma-atomic emission spectrometry MP-AES. The electrochemical performance of the as prepared powders has been evaluated and compared with the exhibited by commercial Pt-ETEK catalyst with similar Pt-loadings, i.e. 20% wt. The herein described electrocatalyst shows higher dispersion (98.2 m2 gPt−1) of Pt nanoparticles (1.5 ± 0.3 nm in size) and strong metal–support interaction than commercial Pt-ETEK counterpart, highlighting the elevated mass activity for methanol electrooxidation., Financial supports from the MICINN (MAT2011-24988), People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642), “Juan de la Cierva” postdoctoral Fellowship, European Commission through the FP7 funded project ZEOCELL (no. 209481), the Government of Aragon and the European Social Fund are gratefully acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Endurance strategies for the preparation of high temperature polymer electrolyte membranes by UV polymerization of 1-H-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide for fuel cell applications

  • Lemus, Javier
  • Eguizabal, Adela
  • Pina, María Pilar
This work pursues the enhancement of durability of polymeric ionic liquid (PIL) membranes prepared by ultraviolet (UV) radiation-induced polymerization for high temperature proton exchange membrane fuel cell (HT-PEMFC) applications. In particular, the co-polymerization of 1-H-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide [HVIm][TFSI] with divinylbenzene used as crosslinker (CL) or the “in situ” UV polymerization on a preexisting randomly porous polybenzimidazole (PBI) matrix as novel preparation methods in this field, have been fully studied and compared as endurance strategies. A comprehensive characterization of these new ion conducting membranes based on PILs, including methanol permeability and fuel cell (FC) performance, has been accomplished. The prepared membranes exhibited extremely high ion conductivity values, i.e. above 400 mS cm−1 at 200 °C, in absence of H2O and H3PO4 molecules as proton carriers. The conduction endurance properties of these outstanding membranes were evaluated at 200 °C for more than 40 days. Performance losses were observed during the first 500 h; afterwards, the conductivity values remained almost constant above 250 mS cm−1. The cross-linked PIL membranes achieved current densities of 57.8 mA cm−2 @ 0.5 V under anhydrous conditions at 120 °C whereas infiltrated PIL on PBI porous supports provided current densities of 46.9 mA cm−2 at the same conditions., The authors would like to acknowledge financial support from the European Commission through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell) Grant Agreement 209481., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoporous PBI membranes by track etching for high temperature PEMs

  • Eguizabal, Adela
  • Sgroi, Mauro
  • Pullini, Daniele
  • Ferain, Etienne
  • Pina, María Pilar
This article describes for the first time the preparation of conducting track-etched PBI membranes 25 mm thick with pore diameter values varying from 15 nm to 50 nm and overall porosity up to 10%. The TGA, DSC and FTIR characterization results for the so obtained nanoporous membranes reveal the chemical modification of PBI upon irradiation along the track walls. A clear conduction outperforming is shown by phosphoric acid doped track-etched PBI in comparison with dense PBI counterparts. This behavior could be explained by the effective contribution of additional pathways for proton transport involving shorter benzimidazole fragments, cross-linked PBI nanodomains and free amphoteric phosphoric acid molecules settled on the pore walls., The authors would like to acknowledge financial support from the European Commission through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell): Grant Agreement no.: 209481., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel hybrid membranes based on polybenzimidazole and ETS-10 titanosilicate type material for high temperature proton exchange membrane fuel cells: A comprehensive study on dense and porous systems

  • Eguizabal, Adela
  • Lemus, Javier
  • Urbiztondo, Miguel A.
  • Garrido, O.
  • Soler Herrero, Jaime
  • Blázquez, José Alberto
  • Pina, María Pilar
Novel hybrid membranes based on polybenzimidazole (PBI) and ETS-10 titanosilicate type materials functionalized with sulfonic groups have been developed for high temperature PEMFC applications. In particular, 45% porous ETS-10/PBI electrolyte membranes in porosity have been reported for the first time in this work. A clear conduction outperforming is shown by porous PBI + 3 wt.% SO3H-ETS-10 doped at 50 °C, attaining “in-plane” conductivity values up to 74 mS cm−1 at 180 °C under dry N2 flow. The transport selectivity of the as prepared dense and porous PBI based membranes has been evaluated by comparison of “in-plane” conductivity/methanol permeability values at 50 °C, 100 °C and 150 °C. Accounting from that, dense pure PBI membranes are preferred at 50 °C (4.7 × 106 S·s·bar mol−1); whereas at 150 °C, dense PBI + 3% SO3H-ETS-10 counterparts exhibit the higher conductivity/methanol permeability ratio (2.5 × 108 S·s·bar mol−1)., The authors would like to acknowledge financial support from the European Commission through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell): Grant Agreement no: 209481., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the incorporation of protic ionic liquids imbibed in large pore zeolites to polybenzimidazole membranes for high temperature proton exchange membrane fuel cells

  • Eguizabal, Adela
  • Lemus, Javier
  • Pina, María Pilar
Conducting fillers based on 2-hydromethyl) trimethylammoniun dimethyl phosphate (IL1), N,N-dimethyl-N-(2-hydroxyethyl) ammonium bis(trifluoromethanesulfonyl)imide (IL2) and 1-H-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (IL3) encapsulated in large pore zeolites (NH4BEA and NaY) have been added to the PBI casting solution for the preparation of high temperature proton exchange membranes (HTPEMs). The filler loading has been systematically varied from 3% to 20% wt. for all the studied composites. The morphological, physicochemical, and electrochemical properties of the as prepared hybrid doped PBI membranes have been fully characterized. For a given conduction filler, the optimum loading is found to be 3% wt. as inferred from the conductivity measurements at 0.05 water molar fraction. Among the tested, the outstanding electrolyte membranes are those containing IL3-NaY. The exhibited through-plane proton conductivity is 54 mS cm−1 at 200 °C for the optimum PBI + IL3-NaY_3%wt hybrid membrane. The so obtained results are explained by the assisted 1-H-3-methylimidazolium and bis(trifluoromethanesulfonyl)imide hydrogen bonding type interactions, clearly beneficial for the proton conduction processes. Moreover, the H2 permeability values for the hybrid electrolyte membranes and pure PBI are quite similar at the examined conditions; indicating the suitability of the preparation procedure in terms of fuel cross-over. The H+/H2 transport selectivity of the optimum IL3-NaY composite membrane clearly outperforms pure PBI and zeolite-PBI counterparts at 50°, 100° and 150 °C. Finally, the optimum composite membranes have been validated in H2/O2 single cell under non humidified conditions up to 180 °C as a “proof of concept” demonstration., The authors would like to acknowledge financial support from DGA-FSE and EC through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell) Grant Agreement 209481., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pt based catalytic coatings on poly(benzimidazole) micromonoliths for indoor quality control

  • Eguizabal, Adela
  • Urbiztondo, Miguel A.
  • Pina, María Pilar
Flexible polybenzimidazole (PBI) micromonoliths prepared by microtransfer moulding are herein proposed for the first time as G-S contactors for catalytic applications. Macroporous polymeric supports with 20 μm as characteristic length and 70,000 m−1 as S/V ratio have been coated by covalent linkage with Pt supported on amino functionalized ETS-10 crystals. As a proof of concept, the catalytic performance of the Pt modified PBI micromonoliths has been successfully demonstrated for indoor quality control, i.e. n-hexane removal at ppm level., The authors would like to acknowledge financial support from NanoAracat (Spain), GICSERV programme (Spain) and the European Commission through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell) grant agreement 209481., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

UV polymerization of room temperature ionic liquids for high temperature PEMs: Study of ionic moieties and crosslinking effects

  • Lemus, Javier
  • Eguizabal, Adela
  • Pina, María Pilar
The conductivity performance of commercial available room-temperature ionic liquids (RTILs) has been evaluated from room conditions up to 200 °C as a function of relative humidity for their potential application in high temperature PEMs. In particular, ammonium and imidazolium based ionic liquids with different counterions and substituents have been investigated. On the basis of conductivity performance, the best RTILs have been selected for the preparation of all solid state ion conductive films by bulk photo-assisted radical polymerization. The goodness of the UV photopolymerization of the respective monomeric ionic liquids (MILs) with vinyl functionality as a function of divinylbenzene cross-linker content has been evaluated by TGA and FTIR analyses. Poly-ionic liquid (PIL) films have been successfully accomplished for polymerized H-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide upon exposure to 365 nm UV lamp with an intensity of 2.4 mW/cm2 for 15 min. Conductivity values above 1.1 S cm−1 at 200 °C have been registered for pure poly[1-(3H-imidazolium)ethylene] bis(trifluoromethanesulfonyl)imide., The authors would like to acknowledge financial support from the European Commission through the FP7 funded project ZEOCELL (http://ina.unizar.es/zeocell) Grant Agreement 209481., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Efficient and facile tuning of Vulcan XC72 with ultra-small Pt nanoparticles for electrocatalytic applications

  • Eguizabal, Adela
  • Usón, Laura
  • Sebastián, Víctor
  • Hueso, José L.
  • Pina, M. Pilar
In this work, we report the synergic combination of tiny, reproducible, and crystalline platinum nanoparticles with functionalized Vulcan XC72 support for the preparation of efficient electrocatalysts. The morphology and crystallinity of Pt NPs, the amination of carbon support and the Pt loading have been properly evaluated by TEM, STEM, ATR-FTIR, XPS and microwave plasma-atomic emission spectrometry MP-AES. The electrochemical performance of the as prepared powders has been evaluated and compared with the exhibited by commercial Pt-ETEK catalyst with similar Pt-loadings, i.e. 20% wt. The herein described electrocatalyst shows higher dispersion (98.2 m2 gPt-1) of Pt nanoparticles (1.5 ± 0.3 nm in size) and strong metal–support interaction than commercial Pt-ETEK counterpart, highlighting the elevated mass activity for methanol electrooxidation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pt based catalytic coatings on poly(benzimidazole) micromonoliths for indoor quality control

  • Eguizábal, A.
  • Urbiztondo, M.A.
  • Pina, M.P.
Flexible polybenzimidazole (PBI) micromonoliths prepared by microtransfer moulding are herein proposed for the first time as G-S contactors for catalytic applications. Macroporous polymeric supports with 20 mu m as characteristic length and 70,000 m(-1) as S/V ratio have been coated by covalent linkage with Pt supported on amino functionalized ETS-10 crystals. As a proof of concept, the catalytic performance of the Pt modified PBI micromonoliths has been successfully demonstrated for indoor quality control, i.e. n-hexane removal at ppm level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

UV polymerization of room temperature ionic liquids for high temperature PEMs: Study of ionic moieties and crosslinking effects

  • Lemus, J.
  • Eguizábal, A.
  • Pina, M. P.
The conductivity performance of commercial available room-temperature ionic liquids (RTILs) has been evaluated from room conditions up to 200oC as a function of relative humidity for their potential application in high temperature PEMs. In particular, ammonium and imidazolium based ionic liquids with different counterions and substituents have been investigated. On the basis of conductivity performance, the best RTILs have been selected for the preparation of all solid state ion conductive films by bulk photo-assisted radical polymerization. The goodness of the UV photopolymerization of the respective monomeric ionic liquids (MILs) with vinyl functionality as a function of divynilbenzene cross-linker content has been evaluated by TGA and FTIR analyses. Poly-ionic liquid (PIL) films have been successfully accomplished for polymerized H-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide upon exposure to 365 nm UV lamp with an intensity of 2.4 mW/cm2 for 15 min. Conductivity values above 1.1 S∙cm-1 at 200oC have been registered for pure poly[1-(3H-imidazolium)ethylene] bis(trifluoromethanesulfonyl)imide.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoporous PBI Membranes by Track-Etching for High Temperature PEMFC

  • Eguizábal Alguacil, Adela
  • Sgroi, Mauro
  • Pullini, Daniele
  • Ferain, Etienne
  • Pina Iritia, Maria Pilar
This article describes for the first time the preparation of conducting track-etched PBI membranes 25 mm thick with pore diameter values varying from 15 nm to 50 nm and overall porosity up to 10%. The TGA, DSC and FTIR characterization results for the so obtained nanoporous membranes reveal the chemical modification of PBI upon irradiation along the track walls. A clear conduction outperforming is shown by phosphoric acid doped track-etched PBI in comparison with dense PBI counterparts. This behavior could be explained by the effective contribution of additional pathways for proton transport involving shorter benzimidazole fragments, cross-linked PBI nanodomains and free amphoteric phosphoric acid molecules settled on the pore walls.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the incorporation of protic ionic liquids imbibed in large pore zeolites to polybenzimidazole membranes for high temperature proton exchange membrane fuel cells

  • Eguizábal, A.
  • Lemus, J.
  • Pina, M. P.
Conducting fillers based on 2-hydromethyl) trimethylammoniun dimethyl phosphate (IL1), N,N-dimethyl-N-(2-hydroxyethyl) ammonium bis(trifluoromethanesulfonyl)imide (IL2) and 1-H-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (IL3) encapsulated in large pore zeolites (NH4BEA and NaY) have been added to the PBI casting solution for the preparation of high temperature proton exchange membranes (HTPEMs). The filler loading has been systematically varied from 3% to 20% wt. for all the studied composites. The morphological, physicochemical, and electrochemical properties of the as prepared hybrid doped PBI membranes have been fully characterized. For a given conduction filler, the optimum loading is found to be 3% wt. as inferred from the conductivity measurements at 0.05 water molar fraction. Among the tested, the outstanding electrolyte membranes are those containing IL3-NaY. The exhibited through-plane proton conductivity is 54 mS cm-1 at 200 °C for the optimum PBI + IL3-NaY_3%wt hybrid membrane. The so obtained results are explained by the assisted 1-H-3-methylimidazolium and bis(trifluoromethanesulfonyl)imide hydrogen bonding type interactions, clearly beneficial for the proton conduction processes. Moreover, the H2 permeability values for the hybrid electrolyte membranes and pure PBI are quite similar at the examined conditions; indicating the suitability of the preparation procedure in terms of fuel cross-over. The H+/H2 transport selectivity of the optimum IL3-NaY composite membrane clearly outperforms pure PBI and zeolite-PBI counterparts at 50°, 100° and 150 °C. Finally, the optimum composite membranes have been validated in H2/O2 single cell under non humidified conditions up to 180 °C as a “proof of concept” demonstration.