Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beyond the H2/CO2 upper bound: One-step crystallization and separation of nano-sized ZIF-11 by centrifugation and its application in mixed matrix membranes

  • Sánchez-Laínez, Javier
  • Zornoza, Beatriz
  • Mayoral, Álvaro
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The synthesis of nano-sized ZIF-11 with an average size of 36 ± 6 nm is reported. This material has been named nano-zeolitic imidazolate framework-11 (nZIF-11). It has the same chemical composition and thermal stability and analogous H2 and CO2 adsorption properties to the conventional microcrystalline ZIF-11 (i.e. 1.9 ± 0.9 μm). nZIF-11 has been obtained following the centrifugation route, typically used for solid separation, as a fast new technique (pioneering for MOFs) for obtaining nanomaterials where the temperature, time and rotation speed can easily be controlled. Compared to the traditional synthesis consisting of stirring + separation, the reaction time was lowered from several hours to a few minutes when using this centrifugation synthesis technique. Employing the same reaction time (2, 5 or 10 min), micro-sized ZIF-11 was obtained using the traditional synthesis while nano-scale ZIF-11 was achieved only by using centrifugation synthesis. The small particle size obtained for nZIF-11 allowed the use of the wet MOF sample as a colloidal suspension stable in chloroform. This helped to prepare mixed matrix membranes (MMMs) by direct addition of the membrane polymer (polyimide Matrimid®) to the colloidal suspension, avoiding particle agglomeration resulting from drying. The MMMs were tested for H2/CO2 separation, improving the pure polymer membrane performance, with permeation values of 95.9 Barrer of H2 and a H2/CO2 separation selectivity of 4.4 at 35 °C. When measured at 200 °C, these values increased to 535 Barrer and 9.1., Financial support from the Spanish MINECO (MAT2013-40566-R, CTQ2012-31762, and RyC-2009-03913), the Aragón Government and the ESF is gratefully acknowledged. In addition, research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement no. 608490, project M4CO2. Finally, the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mixed matrix membranes based on 6FDA polyimide with silica and zeolite microsphere dispersed phases

  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
  • Esekhile, Omoyemen
  • Koros, William J.
Mixed matrix membranes (MMMs) prepared with 6FDA-DAM polymer using ordered mesoporous silica MCM-41 spheres (MSSs), Grignard surface functionalized MSSs (Mg-MSSs) and hollow zeolite spheres are studied to evaluate the effects of surface modification on performance. Performance near or above the so-called permeability-selectivity trade-off curve was achieved for the H2/CH4, CO2/N2, CO2/CH4, and O2/N2 systems. Two loadings (8 wt % and 16 wt %) of MSSs were tested using both constant volume and Wicke–Kallenbach sweep gas permeation systems. Besides single gas H2, CO2, O2, N2, and CH4 tests, mixed gas (50/50 vol %) selectivities were obtained for H2/CH4, CO2/N2, CO2/CH4, and O2/N2 and found to show enhancements vs. single gases for CO2 including cases. Mg-MSS/6FDA-DAM was the best performing MMM with H2/CH4, CO2/N2, CO2/CH4, and O2/N2 separation selectivities of 21.8 (794 Barrer of H2), 24.4 (1214 Barrer of CO2), 31.5 (1245 Barrer of CO2), and 4.3 (178 Barrer of O2), respectively., Financial support from the Spanish MINECO (MAT2013-40566-R), the Aragón Government and the ESF is gratefully acknowledged. B. Z. also thanks the funding from Fundación Ibercaja. Finally, the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) is acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Separation of H2 and CO2 Containing Mixtures with Mixed Matrix Membranes Based on Layered Materials

  • Rubio, Cesar
  • Zornoza, Beatriz
  • Gorgojo, Patricia
  • Tellez, Carlos
  • Coronas, Joaquín
Some membrane separation processes are gradually taking over conventional processes such as distillation, evaporation or crystallization as the technology progresses from bench-scale tests to large-scale prototypes. However, membranes for H2 and CO2 separation constitute a daring technology still under development. This overview focuses on mixed matrix membranes (MMMs), a special type of membranes in which a filler is dispersed in a polymer matrix, as a successful strategy to improve their permeability-selectivity performance while keeping the polymer processability. In particular, among all the possible fillers for MMMs, layered materials (porous zeolites and titanosilicates and graphite derivatives) are discussed in detail due to the several advantages they offer regarding selective microporosity, crystallinity and, what is most important, high specific surface area and aspect ratio. In fact, a selective and as thin as possible, i.e. with high aspect ratio, filler would help to develop high performance MMMs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis of layered titanosilicate JDF-L1 for fabrication of composite polyamide 6 film

  • Rubio, C.
  • Piera, E.
  • Caballero, M.A.
  • Téllez, C.
  • Coronas, J.
In clay polymer nanocomposite technology, nowadays there is concern about the safety and environmental effects of the nanometric materials. In this work, sheets of layered titanosilicate JDF-L1 were synthesized with a size of 5.3 µmand thickness of 115 nm and used to fabricate composite polyamide 6 (PA6) films. The JDF-L1 synthesis was scaled in one pot and the rosette-like particles obtained were disaggregated using a simple process with NaOH solution. The composite with 2 wt.% of disaggregated JDF-L1, characterized by X-ray diffraction and electron microscopy, showed parallel orientation (with respect to the film itself) and good dispersion of the sheets. The composite had a similar barrier effect as the PA6 and its mechanical properties did not deteriorate. This opens up the use of this composite as a packing material providing other properties, such as a biocidal effect and synergy effect in combination with other additives.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Metal Organic Framework synthesis in the presence of surfactants: towards hierarchical MOFs?

  • Seoane, Beatriz
  • Dikhtiarenko, Alla
  • Mayoral, Alvaro
  • Tellez, Carlos
  • Coronas, Joaquin
  • Kapteijn, Freek
  • Gascon, Jorge
The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfac- tant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower tem- peratures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H2O and EtOH with a H2O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non- ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology.17
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of ultrathin films containing the metal organic framework Fe-MIL-88B-NH2 by the Langmuir-Blodgett technique

  • Benito, J.
  • Fenero, M.
  • Sorribas, S.
  • Zornoza, B.
  • Msayib, K.J.
  • McKeown, N.B.
  • Téllez, C.
  • Coronas, J.
  • Gascón, I.
In this work, the fabrication of ultrathin films containing the metal organic framework (MOF) Fe-MIL- 88B-NH2 by the Langmuir–Blodgett (LB) technique has been explored. MOF crystals of two different sizes (1.5 ± 0.3 and 0.07 ± 0.01 µm) have been synthesized and assembled at the air–liquid interface by the LB method. The effect of the subphase pH and particle size on the film formation process has been studied. Moreover, for the first time, mixed MOF+polymer (the commercial soluble polyimide Matrimid®) LB films containing different MOF loadings have been fabricated. These experiments show that it is possible to obtain ultrathin MOF + polymer films with a controlled MOF density. Furthermore, MOF particles are homogeneously distributed in the polymer matrix, even with very large amounts of MOF (up to 95 wt%). LB films have been incorporated into materials of different nature, including glass and mica substrates and also polymeric membranes based on polysulfone Udel® and PIM-1 (polymer of intrinsic microporosity), and the modification of water contact angle after LB film deposition has been analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Metal-organic framework MIL-101(Cr) based mixed matrix membranes for esterification of ethanol and acetic acid in a membrane reactor

  • Iglesia Pedraza, Oscar de la
  • Sorribas, Sara
  • Almendro, Eduardo
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) based on the polyimide Matrimid® (PI) with metal-organic framework (MOF) MIL-101(Cr) as porous nanostructured filler were synthesized and applied as separation element in a membrane reactor to carry out the esterification of acetic acid with ethanol. The MMMs were characterized by techniques including X-ray diffraction, IR spectroscopy and scanning electron microscopy. In order to compare the performance of MIL-101(Cr)-PI MMMs in the membrane reactor, pure PI and HKUST-1-PI membranes were also used. MMMs provided a better reactor performance than the bare PI membrane because of the increase in permeability associated to the presence of MOF as filler. The PI membrane reactor barely achieved the same conversion as a fixed bed reactor, while the MIL- 101(Cr)-PI membrane showed a reactor performance similar to that of the HKUST-1-PI membrane with higher stability, as confirmed by membrane characterization after the reaction experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemocatalysis of sugars to produce lactic acid derivatives on zeolitic imidazolate frameworks

  • Murillo, B.
  • Zornoza, B.
  • De La Iglesia, O.
  • Téllez, C.
  • Coronas, J.
Several research studies related to biorefining have focused on developing routes for biomass conversion into biomaterials or platform molecules. In this work, the zeolitic imidazolate frameworks (ZIFs) ZIF-8 and ZIF-67 have been tested as catalysts in the conversion of sugars (sucrose, glucose and fructose) into methyl lactate. ZIF-8 and ZIF-67 have the same sodalite type zeolite structure but behaved differently in the sugar conversion in methanol due to the respective presence of Zn and Co in their structures. ZIF-8 has been found to be the most active for the conversion of sugars into methyl lactate (yield 42%) and was reused in four catalytic cycles. The chemical and physical effects caused by these cycles on the catalysts have been studied by several techniques (X-ray diffraction, thermogravimetric analyses, infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electronic microscopy and nitrogen adsorption).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insight into ETS-10 synthesis for the preparation of mixed matrix membranes for CO2/CH4 gas separation

  • Sorribas, S.
  • Comesaña-Gándara, B.
  • Lozano, A.E.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
An in-depth study into the synthesis of the titanosilicate ETS-10 has been carried out to obtain crystals with different particle sizes, roughness and porosity. The effect of these parameters on the CO2/CH4 gas separation performance using mixed matrix membranes (MMMs) has been studied. MMMs based on ETS-10 polycrystalline particles of 1-2 µm in size with high surface roughness and porosity gave rise to a good filler dispersion and filler-polymer interaction. The addition of 10 wt% ETS-10 polycrystalline particles into the polysulfone matrix increased the CO2 permeability from 6.1 to 7.8 Barrer and the CO2/CH4 selectivity from 31 to 38. When using the polyimide 6FDA-6FpDA, a glassy polymer with high gas permeability, the addition of 10 wt% ETS-10 polycrystalline particles increased the CO2 permeability from 96 to 125 Barrer, with a decrease in CO2/CH4 selectivity from 56 to 51.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis, structure and characterization of a layered coordination polymer based on Zn(II) and 6-(methylmercapto)purine

  • Perea-Cachero, C.
  • Seoane, B.
  • Diosdado, B.
  • Téllez, C.
  • Coronas, J.
A layered coordination polymer (LCP) named UZAR-S12 was synthesized. Its structure and formula [Zn2(µ2-mMP)3(NO3)(DMF)(H2O)]n·nDMF (mMP, 6-(methylmercapto)purinate; DMF, N,N-dimethylformamide) were determined by single crystal X-ray diffraction. UZAR-S12 is characterized by two kinds of Zn centres. Zn1 is bonded to three mMP ligands at the basal plane, and one water molecule and one DMF molecule at the axial positions, giving rise to a slightly distorted trigonal bipyramidal geometry. Zn2 is coordinated to three mMP linkers and one NO3- resulting in a tetrahedral environment. The layers are arranged yielding a three-dimensional network with guest DMF trapped between them. Lattice and coordination DMF can be replaced reversibly by other solvents producing a contraction (methanol) or an expansion (N,N-diethylformamide) of the framework. A solvent exchange method was used from the vapour phase which preserved the sample crystallinity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis and characterisation of MOF/ionic liquid/chitosan mixed matrix membranes for CO2/N2 separation

  • Casado-Coterillo, C.
  • Fernández-Barquín, A.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
  • Irabien, A.
Mixed matrix membranes (MMMs) have been prepared by combining a small amount of highly absorbing non-toxic ionic liquid, [emim][Ac] (IL) (5 wt%), a biopolymer from renewable abundant natural resources, chitosan (CS), and nanometre-sized metal–organic framework (MOF) ZIF-8 or HKUST-1 particles to improve the selectivity of the IL–CS hybrid continuous polymer matrix. The TGA revealed that the thermal stability has been enhanced by the influence of both IL and ZIF-8 or HKUST-1 fillers, while keeping a water content of around 20 wt%, which suggests the potential of such materials for developing high temperature water resistant membranes for CO2 separation. The CO2 and N2 single gas permeation performance was tested at temperatures in the range of 25–50 °C, to compare with the previously reported IL–CS hybrid membranes. The best CO2 permeability and CO2/N2 selectivity performance is obtained for 10 wt% ZIF-8 and 5 wt% HKUST-1/IL–CS membranes, as high as 5413 ± 191 Barrer and 11.5, and 4754 ± 1388 Barrer and 19.3, respectively. This is attributed to a better adhesion and smaller particle size of ZIF-8 than HKUST-1 nanoparticles with respect to the IL–CS continuous matrix, as interpreted by Hansen solubility parameters and Maxwell-based models, modified to account for rigidification, pore blockage and crystallinity of the CS matrix, with very accurate predictions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

MOF-polymer enhanced compatibility: Post-annealed zeolite imidazolate framework membranes inside polyimide hollow fibers

  • Cacho-Bailo, F.
  • Caro, G.
  • Etxeberría-Benavides, M.
  • Karvan, O.
  • Téllez, C.
  • Coronas, J.
Thermal annealing, a commonly used procedure for improving the performance of polymeric membranes, is in this work exploited in the presence of a metal-organic framework (MOF) supported layer. MOFs and polymers are materials with a common organic character, suggesting an enhanced affinity between them when used together in membrane separation. Zeolite-like imidazolate frameworks (ZIFs) ZIF-8 and ZIF-93 with sod and rho structures and pore apertures of 0.34 and 0.36 nm, respectively, have been grown inside 356 µm OD co-polyimide P84 hollow fibers by microfluidics, leading to continuous supported membranes. When these membranes were thermally in situ annealed below the glass transition temperature, while monitoring both H2 and CH4 permeances, the MOF-polymer adhesion was enhanced. Thus the gas separation selectivity increased without any significant reduction in the gas permeance, and H2/CH4 and CO2/CH4 maximum selectivities of 103 and 18 (ZIF-8) and 101 and 20 (ZIF-93) were respectively measured. The good compatibility between MOF and polymer made improvements possible in the annealing of the membrane once it was prepared. If the annealing of the polymer was carried out before the MOF synthesis, the polymer chain rearrangement and surface smoothing prevented an optimum MOF-polymer interaction and the separation performance worsened. These results proved the compatibility between both materials and their synergistic contribution to gas selective transport.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis and gas adsorption properties of mesoporous silica-NH2-MIL-53(Al) core-shell spheres

  • Sorribas, S.
  • Zornoza, B.
  • Serra-Crespo, P.
  • Gascon, J.
  • Kapteijn, F.
  • Téllez, C.
  • Coronas, J.
Ordered mesoporous silica-NH2-MIL-53(Al) core-shell spheres of about 4 µm in diameter have been synthesized by seeding the corresponding mesoporous silica spheres (MSSs) with crystals of NH2-MIL-53(Al) and subsequent secondary crystal growth into a MOF shell. The morphology of the particles was analyzed by SEM, while TGA, EDX and XRD characterizations gave information on the composition and structure of this material and the activation of the MOF. N2 adsorption analysis revealed that the NH2-MIL-53(Al) shell controlled the access of guest molecules into the hydrophilic silica mesoporous structure, while the breathing behavior of the microporous NH2-MIL-53(Al) shell was confirmed by CO2 adsorption isotherms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mixed matrix membranes based on 6FDA polyimide with silica and zeolite microsphere dispersed phases

  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
  • Esekhile, O.
  • Koros, W.J.
Mixed matrix membranes (MMMs) prepared with 6FDA-DAM polymer using ordered mesoporous silica MCM-41 spheres (MSSs), Grignard surface functionalized MSSs (Mg-MSSs) and hollow zeolite spheres are studied to evaluate the effects of surface modification on performance. Performance near or above the so-called permeability-selectivity trade-off curve was achieved for the H2/CH4, CO2/N2, CO2/CH4, and O2/N2 systems. Two loadings (8 wt % and 16 wt %) of MSSs were tested using both constant volume and Wicke-Kallenbach sweep gas permeation systems. Besides single gas H2, CO2, O2, N2, and CH4 tests, mixed gas (50/50 vol %) selectivities were obtained for H2/CH4, CO2/N2, CO2/CH4, and O2/N2 and found to show enhancements vs. single gases for CO2 including cases. Mg-MSS/6FDA-DAM was the best performing MMM with H2/CH4, CO2/N2, CO2/CH4, and O2/N2 separation selectivities of 21.8 (794 Barrer of H2), 24.4 (1214 Barrer of CO2), 31.5 (1245 Barrer of CO2), and 4.3 (178 Barrer of O2), respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Interactive thermal effects on metal–organic framework Polymer composite membranes

  • Cacho Bailo, Fernando
  • Téllez, Carlos
  • Coronas, Joaquín
Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO2 sequestration, H2 production, and water supply and disposal. Mixed-matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF-8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt¿% 140 nm-sized ZIF-8 loading causes a 40¿% decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545¿°C) 80¿°C lower than in the raw polymer (625¿°C).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

  • Cacho Bailo, Fernando
  • Matito-Martos, Ismael
  • Pérez-Carbajo, Julio
  • Etxeberría-Benavides, Miren
  • Karvan, Oguz
  • Sebastián, Víctor
  • Calero, Sofía
  • Téllez, Carlos
  • Coronas, Joaquín
Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sequential amine functionalization inducing structural transition in an aldehyde-containing zeolitic imidazolate framework: Application to gas separation membranes

  • Cacho-Bailo, Fernando
  • Etxeberría-Benavides, Miren
  • Karvan, Oguz
  • Téllez, Carlos
  • Coronas, Joaquín
A modification in the gas separation performance of zeolitic imidazolate framework (ZIF)-supported hollow fiber (HF) membranes by means of an imine-condensation functionalization reaction carried out by microfluidics is reported. The accommodation of voluminous amine molecules in the SIM-1, Zn(4-methyl-5-imidazolecarboxaldehyde)2, also known as ZIF-94, sod structure during the functionalization reaction caused the ZIF atoms to be rearranged in a less dense rho structure, with a wider pore diameter and a diminished CO2 affinity. These changes had effects on the membrane performance, resulting in an enhanced CO2 permeance while maintaining a good permeance-selectivity balance. ZIF aldehyde-containing SIM-1 membranes were earlier prepared on the inner side of polymeric P84® HF using a microfluidic approach. The SIM-1 membranes displayed very interesting results in the separation of gas mixtures of great relevance to the natural gas field. High selectivities in the separation of He/CH4 (160), H2/CH4 (136) and CO2/CH4 (38) mixtures were achieved, and these are the first SIM-1 membranes with such a high separation performance to the best of our knowledge. These SIM-1 membranes were in situ stepwise functionalized with long-chain amine solutions, namely, hexyl- and nonylamine. Microfluidics allowed the easy sequential implementation of this post-reaction step in the membrane fabrication procedure. An imine-condensation reaction took place between the aldehyde groups in the 4-methyl-5-imidazolecarboxaldehyde ligand forming SIM-1 and the corresponding amines. The extent of the reaction was analyzed by FTIR, TGA and XRD, together with the changes in the textural properties and the adsorption capacities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A new zeolitic hydroxymethylimidazolate material and its use in mixed matrix membranes based on 6FDA-DAM for gas separation

  • Perea-Cachero, Adelaida
  • Sánchez-Laínez, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The new ZIF named UZAR-S13 is formed by Zn2+ and 4(5)-(hydroxymethyl)imidazolate. UZAR-S13 has two distinct phases according to SEM and XRD: amorphous spheres and sheet crystals. UZAR-S13 and byproducts, with no N2 adsorption, rendered a notable CO2 uptake (up to 3.8 mmol g-1 at 30 bar and 0 °C), approaching values of known ZIFs. The most promising materials were included as fillers in mixed matrix membranes based on copolyimide 6FDA-DAM to study the separation of CO2/CH4, CO2/N2, H2/CO2 and H2/CH4 mixtures. The pore blocking hindered the gas flow of bulky molecules (CH4, N2 and CO2). The high CO2 adsorption on sheet crystals also contributed to the decrease in the permeability of CH4, N2 and CO2, giving poor selectivities. In contrast, the MMMs improved both the H2/CH4 selectivity (8.9–12.7 vs. 7.2) and permeability of H2 (544–597 vs. 505 Barrer) of the bare 6FDA-DAM membrane. This emphasizes the potential application of the fillers in the separation by molecular sieving of gas mixtures without CO2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Simultaneous use of MOFs MIL-101(Cr) and ZIF-11 in thin film nanocomposite membranes for organic solvent nanofiltration

  • Echaide-Górriz, Carlos
  • Navarro, Marta
  • Téllez, Carlos
  • Coronas, Joaquín
The MOFs Cr carboxylate MIL-101(Cr) and Zn imidazolate ZIF-11 have different chemical and textural properties. These properties have been combined to prepare thin film nanocomposite (TFN) membranes for organic solvent nanofiltration (OSN) with the two MOFs simultaneously embedded in the same membrane. The TFN membrane containing only ZIF-11 permeated faster than that with only MIL-101(Cr) when filtering sunset yellow (SY) (4.9 L m-2 h-1 bar-1) and acridine orange (AO) (3.2 L m-2 h-1 bar-1), although MIL-101(Cr) alone gave rise in both cases to better rejections (above 90%). The combination of the two MOFs led to a versatile TFN membrane that showed an intermediate performance that improved the rejections given by the TFN membrane synthesized with ZIF-11 and the permeances corresponding to the TFN membrane synthesized with MIL-101(Cr). The effect of the temperature on the TFN membranes designed for this work has also been studied, obtaining apparent activation energies of 13.2 ± 2.1 and 8.3 ± 1.1 kJ mol-1 for the OSN of pure methanol and SY-methanol, respectively.