Skip to main content

CATALIZADORES MICRO- Y NANOESTRUCTURADOS PARA REDUCCION DE DIOXIGENO Y OXIDACION DE HIDROCARBUROS

CTQ2015-66080-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

New insights into the electrochemical behaviour of porous carbon electrodes for supercapacitors

  • Abouelamaiem, Dina Ibrahim
  • Mostazo-López, María José
  • He, Guanjie
  • Patel, Drasti
  • Neville, Tobias P.
  • Parkin, Ivan P.
  • Lozano-Castello, Dolores
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Jorge, Ana Belen
  • Wang, Rongfang
  • Ji, Shan
  • Titirici, Maria-Magdalena
  • Shearing, Paul R.
  • Brett, Dan J.L.
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Activated carbons, with different surface chemistry and porous textures, were used to study the mechanism of electrochemical hydrogen and oxygen evolution in supercapacitor devices. Cellulose precursor materials were activated with different potassium hydroxide (KOH) ratios, and the electrochemical behaviour was studied in 6 M KOH electrolyte. In situ Raman spectra were collected to obtain the structural changes of the activated carbons under severe electrochemical oxidation and reduction conditions, and the obtained data were correlated to the cyclic voltammograms obtained at high anodic and cathodic potentials. Carbon-hydrogen bonds were detected for the materials activated at high KOH ratios, which form reversibly under cathodic conditions. The influence of the specific surface area, narrow microporosity and functional groups in the carbon electrodes on their chemical stability and hydrogen capture mechanism in supercapacitor applications has been revealed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Preparación de fotocatalizadores de TiO2 y ZnO para la eliminación de contaminantes en medio acuoso

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • González-González, Sara
  • Peco-García, Clara
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Keller, Nicolas
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

TiO2-carbon hybrid photocatalysts for the elimination of pollutants in liquid phase

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Ouzzine, Mohammed
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Keller, Nicolas
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

K- and Ca-promoted ferrosilicates for the gas-phase epoxidation of propylene with O2

  • García Aguilar, Jaime
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
In the propylene epoxidation reaction with Fe-SiO2 catalysts the presence of iron oxide particles has a detrimental effect due to the total combustion of propylene on these iron species. Thus, the complete elimination of the iron oxide particles is presented as a preliminary strategy in order to increase the selectivity towards propylene oxide in iron-based catalysts. In this sense, a simple post-treatment of the catalysts with alkali or alkaline-earth elements (such as K or Ca, respectively) has proven effective in the total elimination of these iron oxide particles. Furthermore, the addition of K and Ca has modified the physico-chemical properties of the catalysts, decreasing their superficial acidity and (for higher K or Ca loadings) masking/blocking the active sites responsible for the catalytic reaction. With all this, it is shown that K has a higher efficiency removing the iron oxide particles compared with Ca (for the same molar ratios) and that a higher amount of K (compared to Fe) is required for the complete elimination of the iron oxide particles. A considerable propylene oxide selectivity enhancement (up to 65%) has been obtained for the K-promoted Fe0.005SiO2 and Fe0.01SiO2 catalysts using O2 as sole oxidant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbon-Black-Supported Ru Catalysts for the Valorization of Cellulose through Hydrolytic Hydrogenation

  • Adsuar García, María Dolores
  • Flores-Lasluisa, Jhony Xavier
  • Azar, Fatima Zahra
  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
The one-pot hydrolytic hydrogenation of cellulose (HHC) with heterogeneous catalysts is an interesting method for the synthesis of fuels and chemicals from a renewable resource like lignocellulosic biomass. Supported metal catalysts are interesting for this application because they can contain the required active sites for the two catalytic steps of the HHC reaction (hydrolysis and hydrogenation). In this work, Ru catalysts have been prepared using a commercial carbon black that has been modified by sulfonation and oxidation treatments with H2SO4 and (NH4)S2O8, respectively, in order to create acidic surface sites. The correlation between the catalysts’ properties and catalytic activity has been addressed after detailed catalyst characterization. The prepared catalysts are active for cellulose conversion, being that prepared with the carbon black treated with sulfuric acid the most selective to sorbitol (above 40%). This good behavior can be mainly explained by the suitable porous structure and surface chemistry of the carbon support together with the low content of residual chlorine.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ultraporous nitrogen-doped zeolite-templated carbon for high power density aqueous-based supercapacitors

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Castro-Muñiz, Alberto
  • Nishihara, Hirotomo
  • Kyotani, Takashi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Two zeolite templated carbons (ZTC) with comparable structure and different surface chemistry have been synthesized by chemical vapor deposition of different precursors, producing a non-doped and a N-doped carbon material (4 at. % XPS) in which most of the functionalities are quaternary N. A larger specific capacitance (farads per surface area) has been measured in acid electrolyte for the N-doped ZTC, that can be related to an improved wettability due to the presence of nitrogen and oxygen. The capacitance of N-doped ZTC is lower in alkaline electrolyte, probably due to the loss of electrochemical activity of certain oxygen functionalities. Interestingly, the electro-oxidation process of N-ZTC implies lower irreversible currents (providing higher electrochemical stability) than for ZTC. The presence of quaternary nitrogen greatly improves the electric conductivity of N-ZTC, which shows a superior rate performance. ZTC and N-ZTC capacitors were constructed using 1 M H2SO4. Under the same conditions, N-doped ZTC based capacitor has higher energy density, 6.7 vs 5.9 W h/kg. The power density of N-ZTC is four times higher, producing an outstanding maximum power of 98 kW/kg. These results provide clear evidences of the advantages of doping advanced porous carbon materials with nitrogen functionalities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Hydrothermal synthesis of hybrid TiO2-carbon materials for applications in photocatalysis

  • Cano-Casanova, Laura
  • Amorós-Pérez, Ana
  • Ouzzine, Mohammed
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Síntesis hidrotermal de materiales híbridos TiO2-carbón para su aplicación en fotocatálisis

  • Cano-Casanova, Laura
  • Amorós-Pérez, Ana
  • Ouzzine, Mohammed
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Strategies to Enhance the Performance of Electrochemical Capacitors Based on Carbon Materials

  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
The increasing worldwide energy consumption has contributed to both the vast growth of greenhouse emissions from carbon-containing fuels-based sources (coal, petroleum, etc.) and the depletion of the aforementioned sources. Given this scenario, the development of inexpensive and high-performing energy storage devices, which have the least possible environmental impact, is needed. At this point, electrochemical capacitors (ECs) or supercapacitors are a particular alternative or complementary option to batteries and fuel cells (FCs). ECs present high power output and long cycle life, but little power density compared to conventional or Lithium-ion batteries. Therefore, ECs are going to play a pivotal role, not only in portable electronic devices, but also to provide power density in hybrid electric vehicles. Many efforts have been focused on improving the energy output of ECs, although its enhancement keeping the high power density is still the cornerstone of most investigations. Many studies have been conducted toward the development of electrode materials such as metal oxides, conducting polymers or novel carbons. Nevertheless, they have shown important shortcomings to be implemented (i.e., high cost, low electrical conductivity, poor stability, etc.). Recent studies put the spotlight on nitrogen-containing carbon materials as candidates to improve the ECs performance in terms of energy. Optimizing the ECs configuration (asymmetric and hybrid) is another approach reported to tackle the challenge. Additionally, it is important to mention that the design of carbon materials obtained from inexpensive precursors lately attracted the attention of the research community. This review compiles works performed in our research group over the last years. The effect of nitrogen groups present in the carbon network on the capacitance will be reported and the study of asymmetric configuration to enhance de energy density will be discussed, either opening the potential window or by increasing the capacitance. Moreover, a lignin-based ECs will be described as an environmentally friendly approach. Finally, perspective and conceivable research guidelines in order to hurdle the challenges proposed to implement the carbon materials in the field of ECs will be addressed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of carbon surface on degradation of supercapacitors in a negative potential range

  • Tang, Rui
  • Yamamoto, Masanori
  • Nomura, Keita
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Nishihara, Hirotomo
  • Kyotani, Takashi
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The stability of supercapacitors is the key factor for their use under high temperature, high voltage and long-term durability. To improve the supercapacitor stability, there is a need to understand the degradation mechanism. In this work, the degradation sites in a carbon electrode at negative potential range are investigated in two common organic electrolytes: 1 M Et4NBF4 dissolved in propylene carbonate and in acetonitrile. To elucidate the common factor over a wide range of carbon materials, we examined eight kinds of carbon materials including activated carbons, carbon blacks, zeolite-template carbon (high surface area and a large amount of carbon edge sites) and graphene mesosponge (high surface area and a little amount of carbon edge sites). Their surface structures are distinguished into two regions: carbon basal planes and edge sites by nitrogen physisorption and high-sensitivity temperature-programmed desorption up to 1800 °C. Unlike the degradation at positive potential range, initial degradation reactions at negative potential range occur mainly on the carbon basal planes rather than the edge sites. This finding is corroborated by the theoretical calculation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

TiO2 Modification with Transition Metallic Species (Cr, Co, Ni, and Cu) for Photocatalytic Abatement of Acetic Acid in Liquid Phase and Propene in Gas Phase

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Castillo-Deltell, Ana
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
The commercial P25 titania has been modified with transition metallic species (Cr, Co, Ni, and Cu), added by impregnation with aqueous solutions of the corresponding nitrates. The preparation procedure also includes a heat treatment (500 °C) in argon to decompose the nitrates, remove impurities and to strengthen the metal–TiO2 interaction. The catalysts have been thoroughly characterized using N2 adsorption, scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-visible diffuse-reflectance spectroscopy (UV-vis DRS) and X-ray photoelectron spectroscopy (XPS), and have been tested in the aqueous phase decomposition of acetic acid and in the gas phase oxidation of propene, using an irradiation source of 365 nm in both cases. The photocatalytic activity of the four metal-containing catalysts varies with the nature of the metallic species and follows a similar trend in the two tested reactions. The effect of the nature of the added metallic species is mainly based on the electrochemical properties of the supported species, being Cu/P25 (the sample that contains copper) the best performing catalyst. In the photodecomposition of acetic acid, all the metal-containing samples are more active than bare P25, while in the gas phase oxidation of propene, bare P25 is more active. This has been explained considering that the rate-determining steps are different in gas and liquid media.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

M/TiO2 photocatalysts for the abatement of pollutants in gaseous and liquid effluents

  • Castillo-Deltell, Ana
  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Hydrogen Storage in Porous Materials: Status, Milestones, and Challenges

  • Berenguer-Murcia, Ángel
  • Marco Lozar, Juan Pablo
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
In this account the most relevant advancements in hydrogen storage in porous materials are presented. These include the current state‐of‐the‐art, the challenges which have been overcome, and the hurdles which still remain. The most important milestones which will be discussed in this work will be the development of new apparatuses capable of delivering reliable results under a broad range of operational conditions, in which analysis temperature and pressure are critical parameters. Other aspects such as the materials storage capacity in gravimetric and volumetric terms will be critically discussed to identify the conditions required from an ideal material. Finally, different upgrade possibilities from modifying the adsorbate‐adsorbent interaction to using rigid or flexible materials will be presented and put into perspective with current literature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nitrogen Doped Superactivated Carbons Prepared at Mild Conditions as Electrodes for Supercapacitors in Organic Electrolyte

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Tagaya, Tomomi
  • Hatakeyama, Yoshikiyo
  • Shiraishi, Soshi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen functionalization of a highly microporous activated carbon (SBET > 3000 m2/g), to be used as electrode of electric double layer capacitor (EDLC), was carried out by different methods based on organic chemistry protocols at low temperature and selective thermal post-treatments under inert atmosphere. The combination of both methods allowed the production of carbon materials with very similar surface area (2400–3000 m2/g) and different surface chemistry. The nitrogen functionalization by chemical methods produce the attachment of 4 at. % N (XPS) by consumption of oxygen functional groups. The thermal treatments rearrange the surface chemistry by decreasing and converting both nitrogen and oxygen moieties. The effect of surface chemistry on the performance of these materials as electrodes for symmetric supercapacitors was analyzed in organic electrolyte (1M TEMABF4/propylene carbonate). The devices showed high gravimetric capacitance (37–40 F/g) and gravimetric energy density (31–37 Wh/kg). The electrochemical stability of the EDLC was evaluated by a floating test under severe conditions of voltage and temperature. The results evidence an improvement of the durability of nitrogen-doped activated carbons modified by chemical treatments due to the decrease of detrimental oxygen functionalities and the generation of nitrogen groups with higher electrochemical stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

One step hydrothermal synthesis of TiO2 with variable HCl concentration: Detailed characterization and photocatalytic activity in propene oxidation

  • Cano-Casanova, Laura
  • Amorós-Pérez, Ana
  • Ouzzine, Mohammed
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
TiO2 materials have been prepared by a novel one-step hydrothermal synthesis method at mild conditions (low temperature and time) using titanium tetraisopropoxide as precursor and HCl solutions of different concentration, ranging from 0.5 to 12 M. A detailed physico-chemical characterization has been done, putting especial attention to the quantification of crystallinity and surface OH content. All the obtained samples have high surface areas (100–135 m2/g), small anatase crystal size (8–11 nm) and high crystallinity (around 80%). The concentration of the HCl used in the synthesis has a significant effect on the two first mentioned parameters and on the proportion of crystalline phases (anatase-brookite-rutile) developed. There is a good correlation between the amount of hydroxyl surface groups and the specific surface area (SBET), but regarding surface density of OH groups there are, as well, some differences between samples (the samples with higher OH surface densities are those prepared with less concentrated HCl solutions). Most of the prepared photocatalysts are more active than commercial TiO2-P25 in the gas phase oxidation of propene at low concentration. The best photocatalytic performance is found for samples prepared with 0.5 and 0.8 M HCl, what can be explained by a suitable combination of properties: high surface area and developed porosity, high surface OH groups’ content and density and large proportion of anatase with small crystal size.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modificación de la química superficial de los materiales carbonosos. Un aspecto clave para mejorar sus aplicaciones, Tailoring the surface chemistry of carbon materials. A key to improve their applications

  • González-Gaitán, Carolina
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
La modificación de la química superficial en los materiales carbonosos posibilita la adaptación de sus propiedades con objeto de mejorar su rendimiento en diferentes aplicaciones. En los últimos años se han desarrollado un gran número de técnicas de funcionalización covalente y no-covalente que permiten una modificación selectiva de la química superficial de los materiales carbonosos. Estas técnicas pueden ser catalogadas como métodos químicos o métodos electroquímicos, siendo los últimos más selectivos hacia un heteroátomo o grupo funcional determinado. En esta revisión se muestra una introducción a la química superficial en los materiales carbonosos así como una clasificación y una breve explicación de las técnicas comúnmente empleadas para su modificación.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modeling of oxygen reduction reaction in porous carbon materials in alkaline medium. Effect of microporosity

  • Gabe, Atsushi
  • Ruiz‐Rosas, Ramiro
  • González-Gaitán, Carolina
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The role of porosity, and more specifically, microporosity, in the performance of carbon materials as Oxygen Reduction Reaction (ORR) catalysts in alkaline medium still has to be clarified. For this purpose, a highly microporous KOH-activated carbon and a microporous char have been prepared and their ORR performance in alkaline media were compared to that of two commercial carbon blacks with low and high surface areas, respectively. Interestingly, all carbon materials show a two-wave electrocatalytic process, where the limiting current and the number of electron transferred increase when going to more negative potentials. The limiting current and onset potential of the second wave is positively related to the amount of microporosity, and H2O2 electrochemical reduction tests have confirmed that the second wave could be related to the catalytic activity towards this reaction. In accordance to these findings, a model is developed that takes into account narrow and wide micropores in both charge transfer reactions and the mass transfer rate of O2 and H2O2. This model successfully reproduces the experimental electrochemical response during ORR of the analyzed porous carbon materials and suggests the important role of narrow micropores in H2O2 reduction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

TiO2-AC hybrid materials to produce H2 and biogas by photocatalytic decomposition of acetic acid

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Ouzzine, Mohammed
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evolution of the PVP–Pd Surface Interaction in Nanoparticles through the Case Study of Formic Acid Decomposition

  • García Aguilar, Jaime
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Mori, Kohsuke
  • Kuwahara, Yasutaka
  • Yamashita, Hiromi
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Palladium nanoparticles (Pd NPs) were synthesized by the reduction-by-solvent method using polyvinylpirrolidone (PVP) as capping agent. The nonstatic interaction between PVP and the metallic surface may change the properties of the NPs due to the different possible interactions, through either the O or N atoms of the PVP. In order to analyze these effects and their repercussions in their catalytic performance, Pd NPs with various PVP/Pd molar ratios (1, 10, and 20) were prepared, deposited on silica, and tested in the formic acid decomposition reaction. The catalytic tests were conducted using catalysts prepared by loading NPs with three different time lapses between their purification and their deposition on the silica support (1 day, 1 month, and 6 months). CO adsorption, FTIR spectroscopy, XPS, and TEM characterization were used to determine the accessibility of the Pd NPs surface sites, the electronic state of Pd, and the average NPs size, respectively. The H2 production from the formic acid decomposition reaction has a strong dependence on the Pd surface features, which in turn are related to the NPs aging time due to the progressive removal of the PVP.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fabrication of Co/P25 coated with thin nitrogen-doped carbon shells (Co/P25/NC) as an efficient electrocatalyst for oxygen reduction reaction (ORR)

  • Miyake, Koji
  • Takemura, Toshiki
  • Gabe, Atsushi
  • Zhu, Yexin
  • Ota, Misaki
  • Shu, Yasuhiro
  • Hirota, Yuichiro
  • Uchida, Yoshiaki
  • Tanaka, Shunsuke
  • Katayama, Misaki
  • Inada, Yasuhiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Nishiyama, Norikazu
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Development of electrocatalysts for oxygen reduction reaction (ORR) is important to solve the current problems about energy and fuel. As one of the catalysts with high performance, platina group metals (PGM) based catalysts have been widely known. However, PGM based catalysts are not suitable for large commercial application since the PGM based catalysts are so expensive. In this work, we have developed TiO2 P25 coated with Co and nitrogen-doped carbon layers using commercially available and inexpensive P25 as a support (Co/P25/NC) as one of the alternatives to PGM based catalysts. Co/P25/NC showed an excellent catalytic activity on ORR compared to the other catalysts prepared using SiO2, ZrO2 and Al2O3 as a support. The ORR activity of Co/P25/NC was comparable to Pt based electrocatalysts. In addition, Co/P25/NC showed excellent durability and tolerance toward methanol compared to the Pt based catalyst. This work would provide a new synthetic strategy of electrocatalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Biotechnological Applications of Proteases in Food Technology

  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Secundo, Francesco
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review presents some of the hottest topics in biotechnological applications: proteases in biocatalysis. Obviously, one of the most relevant areas of application is in the hydrolysis of proteins in food technology, and that has led to a massive use on proteomics. The aim is to identify via peptide maps the different proteins obtained after a specific protease hydrolysis. However, concepts like degradomics are also taking on a more relevant importance in the use and study of proteases and will also be discussed. Other protease applications, as seem in cleaning (detergent development), the pharmaceutical industry, and in fine chemistry, will be analyzed. This review progresses from basic areas such as protease classification to a discussion of the preparation of protease‐immobilized biocatalysts, considering the different problems raised by the use of immobilized proteases due to the peculiar features of the substrates, usually large macromolecules. Production of bioactive peptides via limited hydrolysis of proteins will occupy an important place in this review.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Nitrogen-Functional Groups on the ORR Activity of Activated Carbon Fiber-Polypyrrole-Based Electrodes

  • Ramírez-Pérez, Ana Cristina
  • Quílez-Bermejo, Javier
  • Sieben, Juan Manuel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Polypyrrole (PPy) coatings inside the microporosity of an activated carbon fiber (ACF) were synthesized by chemical polymerization obtaining ACF-PPy composites. N-doped ACFs were prepared by carbonization of the ACF-PPy composites at two temperatures (500 and 800 °C). All the samples were characterized using different techniques (XPS, SEM, elemental analysis, physical adsorption of N2, cyclic voltammetry, etc.). The electrochemical characterization in alkaline medium shows that the N-doped ACFs have a similar specific capacitance than the pristine ACF, in spite of the lower specific surface area. The materials were used as electrodes in the oxygen reduction reaction (ORR) in alkaline medium using the rotating ring-disk electrode (RRDE) and linear sweep voltammetry (LSV) tests. It was found that the N-doped ACF material carbonized at 800 °C has higher catalytic activity than the pristine ACF. The investigation also indicates that the ORR process on the N-doped ACF materials proceeds through an indirect two-electron pathway.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Magnetic zeolites: novel nanoreactors through radiofrequency heating

  • García Aguilar, Jaime
  • Fernández-García, Javier
  • Rebrov, Evgeny V.
  • Lees, Martin Richard
  • Gao, Pengzhao
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Many catalytic applications use conventional heating to increase the temperature to allow the desired reaction. A novel methodology is presented for the preparation of magnetic zeolite-based catalysts, allowing more efficient radiofrequency heating. These nanoreactors are tested in the isomerisation of citronellal with successful results and without any apparent deactivation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Cu/TiO2 photocatalysts for the conversion of acetic acid into biogas and hydrogen

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
Photocatalytic decomposition of acetic acid into biogas and hydrogen was performed over Cu/TiO2 photocatalysts synthesized by the sol-gel method. Samples with different Cu loadings (0, 0.5, 1 and 10 wt.%) were prepared by two different methods (in situ and impregnation), and then they were heat treated at 500 °C either in air or in argon. Structural and surface characterization of the photocatalysts was carried out. The influence of the synthesis variables on their efficiency in the photocatalytic decomposition of acetic acid in aqueous solution was analyzed. The photodegradation results show that all the prepared materials are more active than commercial TiO2, used as a reference, and reveal that the presence of copper improves the activity of pure TiO2. Cu/TiO2 photocatalysts prepared by the in situ method and heat treated in argon show the best results. This can be explained considering that these synthesis conditions lead to more efficient interaction between Cu species and TiO2, to a more developed porosity and to a more suitable distribution of copper oxidation states (large contribution of Cu(I) and Cu(0) seem to give better activity). Catalysts with 0.5 wt.% copper are the most active, likely because copper species are highly dispersed and interact efficiently with TiO2. Thus, the activity of a Cu/TiO2 catalyst produced in situ, heat treated in Ar atmosphere and with a 0.5 wt.% Cu content is double than that of the TiO2 commercial catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Insight into the origin of carbon corrosion in positive electrodes of supercapacitors

  • Tang, Rui
  • Taguchi, Kaishi
  • Nishihara, Hirotomo
  • Ishii, Takafumi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Asada, Toshihiro
  • Kobayashi, Naoya
  • Muramatsue, Yasuji
  • Kyotania, Takashi
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
While activated carbons are used as electrode materials in commercial supercapacitors, they are not stable under high voltage operation especially at a positive-electrode side, and this limits the working voltage of supercapacitors to about 2.8 V in organic electrolytes. Thus, revealing the specific carbon chemical structures causing the corrosion is of great significance to come up with ideas of avoiding the corrosion reactions and eventually to achieve high energy density by expanding the working voltage. In this work, a variety of carbon materials are analyzed with many characterization techniques such as X-ray diffraction, Raman spectroscopy, N2 adsorption, magnetic susceptibility measurement, and temperature programmed desorption up to 1800 °C, to find out the origin of corrosion reactions in an organic electrolyte. While carbon crystallinity and porosity are not directly related to the positive-electrode corrosion, a good correlation is found between the corrosion charge and the number of carbon edge sites terminated by H and oxygen-functional groups which are decomposed and release CO. It is thus concluded that the H-terminated edge sites, phenol, ether and carbonyl groups are electroactive sites for the carbon materials used in the positive electrode of supercapacitors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Anchoring a Co/2-methylimidazole complex on ion-exchange resin and its transformation to Co/N-doped carbon as an electrocatalyst for the ORR

  • Zhu, Yexin
  • Miyake, Koji
  • Shu, Yasuhiro
  • Gabe, Atsushi
  • Hirota, Yuichiro
  • Uchida, Yoshiaki
  • Tanaka, Shunsuke
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Nishiyama, Norikazu
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Synthesizing high-activity metal/heteroatom-co-doped carbon (M/H–C) electrocatalysts for the oxygen reduction reaction (ORR) is critical for the commercialization of fuel cells, but remains challenging because of the difficulty in making highly dispersed (M/H–C) electrocatalysts. Herein, a commercial ion-exchange resin, Amberlyst 15, is used as a support, and Co/2-methylimidazole is anchored on the ion-exchange site of the support to obtain Co/N/Amb as the precursor of the M/H–C electrocatalyst. After the precursor is pyrolyzed and converted into Co/N/C materials, it is activated with CO2, and the obtained material (act-Co/N/C) exhibits remarkable ORR activity with a high onset potential of 0.943 V (vs. the reversible hydrogen electrode) and an excellent kinetic current density comparable to commercial 5 wt% Pt/C in an alkaline medium. The favorable activity is mainly attributed to the ultra-dispersed CoNx and high porosity of act-Co/N/C. Our synthetic strategy could be applied to the preparation of other well-dispersed M/H–C materials. This work opens a new direction in the synthetic strategy of carbon materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Spherical Activated Carbons with High Mechanical Strength Directly Prepared from Selected Spherical Seeds

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Ouzzine, Mohammed
  • Rufete Beneite, Mónica
  • Romero Anaya, Aroldo José
  • Lillo-Rodenas, Maria Angeles
  • Linares-Solano, Angel
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
In the present manuscript, the preparation of spherical activated carbons (SACs) with suitable adsorption properties and high mechanical strength is reported, taking advantage of the retention of the spherical shape by the raw precursors. An easy procedure (carbonization followed by CO2 activation) has been applied over a selection of three natural seeds, with a well-defined spherical shape and thermal stability: Rhamnus alaternus (RA), Osyris lanceolate (OL), and Canna indica (CI). After the carbonization-activation procedures, RA and CI, maintained their original spherical shapes and integrity, although a reduction in diameter around 48% and 25%, respectively, was observed. The porosity of the resulting SACs could be tuned as function of the activation temperature and time, leading to a spherical activated carbon with surface area up to 1600 m2/g and mechanical strength similar to those of commercial activated carbons.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhanced ammonia-borane decomposition by synergistic catalysis using CoPd nanoparticles supported on titano-silicates

  • García Aguilar, Jaime
  • Navlani-García, Miriam
  • Berenguer-Murcia, Ángel
  • Mori, Kohsuke
  • Kuwahara, Yasutaka
  • Yamashita, Hiromi
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Pd and CoxPd1−x nanoparticles (NPs), synthesized using the reduction by solvent method, were loaded on SiO2 and Ti–SiO2 supports. The resulting catalysts were tested in the ammonia-borane decomposition reaction under dark and UV-vis conditions. The synergistic promotion by Co (in the NPs) and Ti (in the support), combined with the UV-vis light irradiation, enhanced the catalytic activity showing very promising TOFs values for this kind of catalysis, from 1.53 to 49.5 mol H2 per mol Pd per min.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Cu/TiO2 Photocatalysts for the Conversion of Acetic Acid into Biogas and Hydrogen

  • Amorós-Pérez, Ana
  • Cano-Casanova, Laura
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Zeolite A-Carbon Membranes: Possibilities in H2 Purification and how to Overcome their Shortcomings

  • Varela Gandía, Francisco José
  • Lozano-Castello, Dolores
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
This work describes the modification of zeolite Na-LTA membranes supported on macroporous carbon materials, prepared by a combination of secondary hydrothermal treatment followed by different alternative post-synthesis procedures, which aim at improving the permeance properties of the as-synthesized Na-LTA membranes with a simulated reformer mixture (H2, CO, CO2 and H2O) towards their use in a hydrogen purification device.These post-synthetic treatments include the deposition of a thin layer of amorphous silica formed by the hydrolysis of a silicon alcoxide, the coating with a thin metallic film by electroless plating, and the deposition of noble metal nanoparticles. Our results indicate that some of these treatments, which may be performed very quickly compared to other treatments which are generally used in order to improve the quality of the membranes, result in membranes which may effectively separate H2 from CO under simulated reformer conditions. Considering the simple approach employed in some of the cases described in this study, the potential benefits should be considered highly interesting in fields such as membrane recovery and membrane selectivity control.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Understanding of oxygen reduction reaction by examining carbon-oxygen gasification reaction and carbon active sites on metal and heteroatoms free carbon materials of different porosities and structures

  • Gabe, Atsushi
  • Ruiz‐Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Knowledge of the carbon active sites for Oxygen Reduction Reaction (ORR) remains confusing and controversial and thus the detailed mechanism is still not clarified. Considering the nature of the carbon-oxygen interaction in active sites during the gasification reaction, it could be inferred that the sites for this reaction are the same as those participating in the ORR. Herein, the relationship between carbon-oxygen gasification properties and ORR activities was elucidated. Carbon materials including different structures and porosities were selected and extensively characterized in terms of structural and electrochemical properties. Regarding gasification properties, active surface area (ASA) and reactivity for carbon-oxygen reaction were determined. A good linear correlation is found between ORR activity and carbon-oxygen gasification reactivity. Interestingly, similar correlation is found between ORR activity or gasification reactivity and ASA, although two different slopes are observed for the analyzed samples, being higher for the carbon nanotubes (CNT) based samples. The results suggest that the active sites participating in the gasification reaction can be catalytic sites for ORR although the specific catalytic activity is determined by the carbon structure. Thus, active sites in CNT show higher activities toward ORR and carbon gasification reactivities than others.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Pd and Cu-Pd nanoparticles supported on multiwall carbon nanotubes for H2 detection

  • Navarro-Botella, Pascual
  • García Aguilar, Jaime
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Simple, cost-effective, and reproducible devices have been prepared for the detection of H2 at room temperature. Pd, Cu and bimetallic Cu-Pd nanoparticles (prepared by the reduction-by-solvent method) have been loaded on a MWCNT deposit avoiding the use of surfactants or complicated techniques. The devices based on pure Pd nanoparticles have shown a high H2 sensitivity in the studied H2 concentration range with low response and recovery times. However, the addition of Cu in the metallic nanoparticles does not result in a considerable improvement. Furthermore, the Pd and Cu-Pd/MWCNTs-based sensors have kept part of their H2 sensitivity when they have been tested in an O2-depleted atmospheres, which is an altogether new finding compared to Pd-based systems. Through these experiments it has been possible to conclude how the main H2 detection mechanism is the electron transfer from the nanoparticles (when the PdHx is formed) to the carbon nanotubes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Opportunities in the use of carbon materials to develop heterogenized metal complexes for catalytic applications

  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Carbon materials constitute a broad family of solids that encompass a high variety of physical and chemical properties, including morphology. These materials have shown to be very useful as catalysts supports and, in this context, also for the heterogenization of metal complexes owing catalytic properties. This work is mainly, the summary of the results obtained in several research projects focused on developing heterogenized molecular catalysts by exploiting the properties of a plethora of carbon materials to address several immobilization procedures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the Preparation Method (Sol-Gel or Hydrothermal) and Conditions on the TiO2 Properties and Activity for Propene Oxidation

  • Cano-Casanova, Laura
  • Amorós-Pérez, Ana
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
Since the two most commonly used methods for TiO2 preparation are sol-gel (SG) and hydrothermal (HT) synthesis, this study attempts to compare both methods in order to determine which one is the most suitable to prepare photocatalysts for propene oxidation. In addition, this work studies how the concentration of the HCl used for hydrolysis of the TiO2 precursor affects the properties of the obtained materials. Also, the effect of avoiding the post-synthesis heat-treatment in a selection of samples is investigated. The photocatalysts are characterized by XRD, N2 adsorption-desorption isotherms and UV-vis spectroscopy, and the study tries to correlate the properties with the photocatalytic performance of the prepared TiO2 samples in propene oxidation. TiO2 materials with high crystallinity, between 67% and 81%, and surface area (up to 134 m2/g) have been obtained both by SG and HT methods. In general, the surface area and pore volume of the TiO2-HT samples are larger than those of TiO2-SG ones. The TiO2-HT catalysts are, in general, more active than TiO2-SG materials or P25 in the photo-oxidation of propene. The effect of HCl presence during the TiO2 synthesis and of the post synthesis heat treatment are much more marked in the case of the SG materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Oxygen-reduction catalysis of N-doped carbons prepared via heat treatment of polyaniline at over 1100 °C

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Advanced catalysts for the oxygen reduction reaction based on N-doped carbon materials have been designed via pyrolysis of polyaniline at temperatures above 1100 °C. The detailed characterization and computational calculations suggest that the conversion from pyridine to quaternary N in the edge position at high temperatures is responsible for the outstanding activity.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new zeolitic hydroxymethylimidazolate material and its use in mixed matrix membranes based on 6FDA-DAM for gas separation

  • Perea-Cachero, Adelaida
  • Sánchez-Laínez, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The new ZIF named UZAR-S13 is formed by Zn2+ and 4(5)-(hydroxymethyl)imidazolate. UZAR-S13 has two distinct phases according to SEM and XRD: amorphous spheres and sheet crystals. UZAR-S13 and byproducts, with no N2 adsorption, rendered a notable CO2 uptake (up to 3.8 mmol g−1 at 30 bar and 0 °C), approaching values of known ZIFs. The most promising materials were included as fillers in mixed matrix membranes based on copolyimide 6FDA-DAM to study the separation of CO2/CH4, CO2/N2, H2/CO2 and H2/CH4 mixtures. The pore blocking hindered the gas flow of bulky molecules (CH4, N2 and CO2). The high CO2 adsorption on sheet crystals also contributed to the decrease in the permeability of CH4, N2 and CO2, giving poor selectivities. In contrast, the MMMs improved both the H2/CH4 selectivity (8.9–12.7 vs. 7.2) and permeability of H2 (544–597 vs. 505 Barrer) of the bare 6FDA-DAM membrane. This emphasizes the potential application of the fillers in the separation by molecular sieving of gas mixtures without CO2., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER (MAT2013-40556-R, MAT2016-77290-R (MINECO/FEDER) and CTQ2015-66080-R (MINECO/FEDER)), the European Social Fund (ESF) and the Aragón Government (DGA, T05) is gratefully acknowledged. A. P.-C. and J. S.-L. also thank the DGA and Spanish Education Ministry Program FPU2014, respectively, for Ph.D. grants. The microscopy work was carried out in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA, Universidad de Zaragoza). The authors would like to acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A new zeolitic hydroxymethylimidazolate material and its use in mixed matrix membranes based on 6FDA-DAM for gas separation

  • Perea-Cachero, Adelaida
  • Sánchez-Laínez, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The new ZIF named UZAR-S13 is formed by Zn2+ and 4(5)-(hydroxymethyl)imidazolate. UZAR-S13 has two distinct phases according to SEM and XRD: amorphous spheres and sheet crystals. UZAR-S13 and byproducts, with no N2 adsorption, rendered a notable CO2 uptake (up to 3.8 mmol g-1 at 30 bar and 0 °C), approaching values of known ZIFs. The most promising materials were included as fillers in mixed matrix membranes based on copolyimide 6FDA-DAM to study the separation of CO2/CH4, CO2/N2, H2/CO2 and H2/CH4 mixtures. The pore blocking hindered the gas flow of bulky molecules (CH4, N2 and CO2). The high CO2 adsorption on sheet crystals also contributed to the decrease in the permeability of CH4, N2 and CO2, giving poor selectivities. In contrast, the MMMs improved both the H2/CH4 selectivity (8.9–12.7 vs. 7.2) and permeability of H2 (544–597 vs. 505 Barrer) of the bare 6FDA-DAM membrane. This emphasizes the potential application of the fillers in the separation by molecular sieving of gas mixtures without CO2.