Skip to main content

RED DE PILAS DE COMBUSTIBLE PARA UN FUTURO ENERGETICO SOSTENIBLE

ENE2017-90932-REDT

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Charge transfer mechanisms in 40SiO2-40P2O5-20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for low temperature fuel cells

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • CARMEN DEL RIO
  • J.Mosa
[EN] A series of hybrid membranes synthetized via sol-gel chemistry and direct infiltration method have been pre-pared, consisting of sulfonated styrene-ethylene-butylene-styrene block copolymer (sSEBS), as polymeric matrix, and a zirconia modified phosphosilicate (40SiO2-40P2O5-20ZrO2) as inorganic component. The infiltration procedure has been carried out by immersion of sSEBS membranes in a 40SiO2-40P2O5-20ZrO2 sol solution for 5, 10, 20, and 40 min. The hybrid infiltrated membranes (sSEBS-Zr) have been thermally characterized to further investigate their suitability as electrolytes for low temperature fuel cells. TGA thermograms showed that sSEBS-Zr were more thermally stable than sSEBS. DSC thermograms showed that the addition of inorganic component decreases the Tg of the polystyrene block in hybrid membranes sSEBS-Zr. DETA showed significant differences in the charge transfer mechanisms between low and high temperature regions. The through-plane proton con-ductivity analysis showed that the sSEBS-Zr infiltrated 10 min had a better proton conductive capacity at 333K, thus showing that longer infiltration times might induce excessive M-O-M ' bonds, causing competition for the available proton sites. These results indicated that the proposed methodology shows good agreement with experimental performance data in hydrogen PEMFCs. Nonetheless, when DMFCs are considered, minimizing the permeability of methanol enhances more the performance than increasing the proton conductivity., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry, and Competitiveness for the research projects REPICOMES (ENE2017-90932-REDT) and POLY-ELMETH (PID2020-116322RB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Triblock SEBS/DVB crosslinked and sulfonated membranes: fuel cell performance and conductivity

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, Carmen
  • Gil-Castell, O.
  • Primaz, Carmem
[EN] A set of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) membranes with 10 or 25 wt.% divinyl-benzene (DVB) as a crosslinking agent were prepared and validated. Physicochemical characterization revealed suitable hydrolytic and thermal stability of photo-crosslinked membranes containing 25%wt. DVB and post-sulfonated. These compositions were evaluated in H2/O2 single cells, and electrical and proton conductivities were furtherly assessed. The membranes with the milder post-sulfonation showed greater proton conductivity than those with excessive sulfonation. In terms of electrical conductivity, a universal power law was applied, and the values obtained were low enough for being used as polyelectrolytes. At the analyzed temperatures, the charge transport process follows a long-range pathway or vehicular model. Finally, fuel cell performance revealed the best behavior for the membrane with 25 wt.% DVB, photo-crosslinked during 30 min and mild sulfonated, with a promising power density of 526 mW·cm-2. Overall, the results obtained highlight the promising fuel cell performance of these cost-effective triblock copolymer-based membranes and indicate that higher sulfonation does not necessarily imply better power density., Ministerio de Economía, Industria y Competitividad, Gobierno de España, Grant/Award Number: ENE2017-86711-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance of sulfonated poly(vinyl alcohol)/graphene oxide polyelectrolytes for direct methanol fuel cells

  • Gil-Castell, Óscar
  • Santiago, Óscar
  • Navarro, Emilio
  • Leo, Teresa J.
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The use nanotechnology along with the consideration of a functionalization and stabilization approach to the poly(vinyl alcohol) (PVA) was considered useful for the preparation of cost-effective polyelectrolyte membranes. A set of nanocomposite and crosslinked membranes based in PVA/SSA/GO were prepared and analyzed as polyelectrolytes in direct methanol fuel cells (DMFCs). The crosslinking and sulfonation by the use of sulfosuccinic acid (SSA) enhanced the stability and increased the proton conducting sites in the PVA structure. The presence of graphene oxide (GO) augmented the stability, remarkably decreased the methanol crossover and enhanced power density curves. An optimum value for proton conductivity was found for the 0.50%wt of GO proportion, which decreased to higher concentrations of GO. Given the power density curve dependency on both the proton conductivity and the crossover reduction, the performance of these membranes as polyelectrolytes in DMFCs is strictly related to the balance between both factors. Therefore, a proportion of GO of 0.75%wt may assure suitable proton conductivity 3 mS·cm-1 and high resistance to methanol permeability, reaching promising power density of 16 mW·cm-2 with lower hydration levels., The Spanish Ministry of Economy, Industry, and Competitiveness is acknowledged for the projects ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R, ENE2017-90932-REDT, and UPOV13-3E-1947. The Spanish Ministry of Education, Culture, and Sports is thanked for the predoctoral FPU grant for O. Gil-Castell (grant no. FPU13/01916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, C.
  • García, O.
[EN] A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the Tg, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H2/O2 - PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV-(PAID -10-19) SUB-1 grant for R. Teruel.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Metal-free heteroatom-doped carbon-based catalysts for ORR. A critical assessment about the role of heteroatoms

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during last years because of their interesting properties towards oxygen reduction reaction. Intrinsic parameters of carbon materials such as porosity, structural order, conductivity and defects have proved to have a strong influence in the catalytic activity of these materials. However, the highest differences in catalytic activity are obtained via doping with heteroatoms, being nitrogen the most remarkable in terms of activity and selectivity. One of the most challenging goals of the scientific community is to unravel the role of the functional groups in order to design an optimized material. However, the complexity of isolating one specific functionality, the difficult unambiguous characterization of the species and the influence of the intrinsic properties of the carbon materials, make the identification of the active sites a complex and controversial issue. This review presents a critical assessment about the role of heteroatoms on ORR from the analysis of the literature that combine both experimental work and computational modelling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical functionalization of single wall carbon nanotubes with phosphorus and nitrogen species

  • Quintero-Jaime, Andrés Felipe
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Single Wall Carbon Nanotubes (SWCNTs) have been successfully functionalized by electrochemical oxidation in presence of 4-aminophenyl phosphonic acid (4-APPA). Electrochemical modification has been performed by cyclic voltammetry using different upper potential limits, producing the incorporation of N and P functionalities on SWCNT through polymerization reactions, although some covalent attachment cannot be discarded. Electrochemical oxidation in presence of CNT produces polymerization of 4-APPA, what has been related to the interaction between monomer and the CNT surface. The voltammograms of the functionalized SWCNT show different well-defined redox processes that are maintained at high pH. Raman spectroscopy shows that the structure of the SWCNT is maintained even at high potentials suggesting that oxidation selectively occurs in the 4-APPA monomer favoring polymer chain growth. The degree of modification of SWCNT can be easily controlled by selecting the electrochemical conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Towards understanding the active sites for the ORR in N-doped carbon materials through fine-tuning of nitrogen functionalities: an experimental and computational approach

  • Quílez-Bermejo, Javier
  • Melle-Franco, Manuel
  • San-Fabián, Emilio
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The design of advanced N-doped carbon materials towards oxygen reduction reaction (ORR) catalysis is only possible if the nature of the active sites is fully understood. There is an important piece of research seeking to overcome this challenge through experimental or theoretical results. However, the combination of both approaches is necessary to deepen the knowledge about this subject. This work presents excellent agreement between experimental results and computational models, which provides evidence of the nature of the most active sites in N-doped carbon materials. N-doped carbon materials have been experimentally obtained through double stage treatment of polyaniline in distinct atmospheres (both oxygen-containing and inert atmospheres) at different temperatures (800–1200 °C). According to temperature programmed desorption (TPD), Raman spectroscopy, N2-adsorption isotherms at −196 °C and X-ray photoelectron spectroscopy (XPS), this synthesis method results in the selective formation of nitrogen species, without significant changes in structural order or porosity. ORR catalytic tests evidence the highly efficient catalysis, with platinum-like performance in terms of the current density and onset potential, of N-doped carbon materials selectively containing graphitic-type nitrogen species. Computational chemistry, through DFT calculations, shows that edge-type graphitic nitrogen is more effective towards ORR catalysis than pyridinic, pyrrolic, pyridonic, oxidized and basal-type graphitic nitrogen species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nitrogen-Doped Superporous Activated Carbons as Electrocatalysts for the Oxygen Reduction Reaction

  • Mostazo-López, María José
  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Nitrogen-containing superporous activated carbons were prepared by chemical polymerization of aniline and nitrogen functionalization by organic routes. The resulting N-doped carbon materials were carbonized at high temperatures (600–800 °C) in inert atmosphere. X-ray Photoelectron Spectroscopy (XPS) revealed that nitrogen amount ranges from 1 to 4 at.% and the nature of the nitrogen groups depends on the treatment temperature. All samples were assessed as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline solution (0.1 M KOH) in order to understand the role of well-developed microporosity as well as the different nitrogen functionalities on the electrocatalytic performance in ORR. It was observed that nitrogen groups generated at high temperatures were highly selective towards the water formation. Among the investigated samples, polyaniline-derived activated carbon carbonized at 800 °C displayed the best performance (onset potential of 0.88 V versus RHE and an electron transfer number of 3.4), which was attributed to the highest concentration of N–C–O sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nitrogen Doped Superactivated Carbons Prepared at Mild Conditions as Electrodes for Supercapacitors in Organic Electrolyte

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Tagaya, Tomomi
  • Hatakeyama, Yoshikiyo
  • Shiraishi, Soshi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen functionalization of a highly microporous activated carbon (SBET > 3000 m2/g), to be used as electrode of electric double layer capacitor (EDLC), was carried out by different methods based on organic chemistry protocols at low temperature and selective thermal post-treatments under inert atmosphere. The combination of both methods allowed the production of carbon materials with very similar surface area (2400–3000 m2/g) and different surface chemistry. The nitrogen functionalization by chemical methods produce the attachment of 4 at. % N (XPS) by consumption of oxygen functional groups. The thermal treatments rearrange the surface chemistry by decreasing and converting both nitrogen and oxygen moieties. The effect of surface chemistry on the performance of these materials as electrodes for symmetric supercapacitors was analyzed in organic electrolyte (1M TEMABF4/propylene carbonate). The devices showed high gravimetric capacitance (37–40 F/g) and gravimetric energy density (31–37 Wh/kg). The electrochemical stability of the EDLC was evaluated by a floating test under severe conditions of voltage and temperature. The results evidence an improvement of the durability of nitrogen-doped activated carbons modified by chemical treatments due to the decrease of detrimental oxygen functionalities and the generation of nitrogen groups with higher electrochemical stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Polyaniline-Derived N-Doped Ordered Mesoporous Carbon Thin Films: Efficient Catalysts towards Oxygen Reduction Reaction

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One of the most challenging targets in oxygen reduction reaction (ORR) electrocatalysts based on N-doped carbon materials is the control of the pore structure and obtaining nanostructured thin films that can easily be incorporated on the current collector. The carbonization of nitrogen-containing polymers and the heat treatment of a mixture of carbon materials and nitrogen precursor are the most common methods for obtaining N-doped carbon materials. However, in this synthetic protocols, the surface area and pore distribution are not controlled. This work enables the preparation of 2D-ordered N-doped carbon materials through the carbonization of 2D polyaniline. For that purpose, aniline has been electropolymerized within the porous structure of two different templates (ordered mesoporous Silica and ordered mesoporous Titania thin films). Thus, aniline has been impregnated into the porous structure and subsequently electropolymerized by means of chronoamperometry at constant potential. The resultant samples were heat-treated at 900 °C with the aim of obtaining 2D N-doped carbon materials within the template structures. Polyaniline and polyaniline-derived carbon materials have been analyzed via XPS and TEM and characterized by electrochemical measurements. It is worth noting that the obtained 2D-ordered mesoporous N-doped carbon materials have proved to be highly active electrocatalysts for the ORR because of the formation of quaternary nitrogen species during the heat treatment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical performance of N‐doped superporous activated carbons in ionic liquid‐based electrolytes

  • Mostazo-López, María José
  • Krummacher, Jakob
  • Balducci, Andrea
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical performance of nitrogen-doped and non-doped superporous activated carbons as electrodes for supercapacitors was assessed in organic and ionic liquid-based electrolytes. The nitrogen functionalization was carried out through post-modification treatments at mild conditions to produce N-doped activated carbons that preserve the microporosity of the pristine carbon material. The electrodes based on these materials provide large capacitance values (up to 150–180 F/g) in both 1 M Pyr14TFSI/PC and 1 M Pyr14BF4/PC due to their tailored porous texture, given by their well-developed microporosity and low mesopore volume. The electrochemical double layer capacitors based on these materials displayed outstanding capacitance (37–40 F/g and 14 F/cm3) and energy values (44–48 Wh/kg and 16–17 Wh/L). The nitrogen-doped activated carbons evidence high stability at positive and negative polarization potentials due the presence of specific N functionalities. The results prove that surface chemistry of carbon materials plays a key role on their degradation under high operation voltage conditions. The durability of the devices can be improved by doping carbon electrodes with selected nitrogen groups, such as nitrogen heterocycles and amine-like surface functionalities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the Origin of the Effect of pH in Oxygen Reduction Reaction for Nondoped and Edge-Type Quaternary N-Doped Metal-Free Carbon-Based Catalysts

  • Quílez-Bermejo, Javier
  • Strutyński, Karol
  • Melle-Franco, Manuel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during the last 15 years as an alternative toward the replacement of platinum-based catalysts for the oxygen reduction reaction (ORR). However, carbon-based catalysts only show promising catalytic activity in alkaline solution. Concurrently, the most optimized polymer electrolyte membrane fuel cells use proton exchange membranes. This means that the cathode electrode is surrounded by a protonic environment in which carbon materials show poor performance, with differences above 0.5 V in EONSET for nondoped carbon materials. Therefore, the search for highly active carbon-based catalysts is only possible if we first understand the origin of the poor electrocatalytic activity of this kind of catalysts in acidic conditions. We address this matter through a combined experimental and modeling study, which yields fundamental principles on the origin of the pH effects in ORR for carbon-based materials. This is relevant for the design of pH-independent metal-free carbon-based catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Residuos de biomasa como plataforma para obtener materiales carbonosos porosos mediante carbonización hidrotermal en presencia de H3PO4, Biomass wates as plataform to obtain porous carbon materials through a hydrothermal carbonization in presence of H3PO4

  • Chaparro-Garnica, Jessica
  • Mostazo-López, María José
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
La carbonización hidrotermal (HTC) es un proceso útil para la producción de materiales carbonosos a partir de residuos de biomasa. Sin embargo, para desarrollar una porosidad elevada es necesario emplear un tratamiento de activación adicional. Entre los métodos de activación más utilizados para los residuos de biomasa está la activación química empleando ácido fosfórico (H3PO4) como agente activante. Nuestro grupo de investigación ha desarrollado un proceso basado en un tratamiento hidrotermal en presencia de una disolución acuosa de ácido fosfórico de baja concentración, evitando así la etapa de impregnación, que puede producir materiales carbonosos con un elevado desarrollo de porosidad. Este proceso basado en un tratamiento hidrotermal es prometedor para obtener materiales carbonosos de bajo coste, ya que es respetuoso con el medio ambiente al involucrar recursos renovables y la posibilidad de reutilizar la disolución de ácido fosfórico. En este trabajo se presenta la caracterización de materiales carbonosos porosos obtenidos mediante este procedimiento y sus perspectivas para futuras aplicaciones en almacenamiento de energía.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Layered Lanthanide Sulfophosphonates and Their Proton Conduction Properties in Membrane Electrode Assemblies

  • Bazaga-García, Montse
  • Salcedo, I.R.
  • Colodrero, Rosario M. P.
  • Xanthopoulos, K.
  • Villemin, D.
  • Stock, N.
  • López-González, Mar
  • Río, Carmen del
  • Losilla, E. R.
  • Cabeza, A.
  • Demadis, K. D.
  • Olivera-Pastor, P.
Metal phosphonates containing acidic groups exhibit a wide range of proton conduction properties, which may enhance the performance of membrane electrode assemblies (MEAs). In this work, focus is placed on proton conduction properties of coordination polymers derived from the combination of lanthanide ions with a phosphonate derivative of taurine (2-[bis(phosphonomethyl)amino]ethanesulfonic acid, HSP). High-throughput hydrothermal screening (140 °C) was used to reach optimal synthesis conditions and access pure crystalline phases. Seven compounds with the composition Ln[H(OPCH)-NH-(CH)-SO]·2HO were isolated and characterized, which crystallize in two different structures, monoclinic m-LaHSP and orthorhombic o-LnHSP (Ln = Pr, Nd, Sm, Eu, Gd, and Tb), with unit cell volumes of ∼1200 and ∼2500 Å, respectively. Their crystal structures, solved ab initio from X-ray powder diffraction data, correspond to different layered frameworks depending on the Ln cation size. In the orthorhombic series, o-LnHSP, the sulfonate group is noncoordinated and points toward the interlayer space, while for m-LaHSP, both phosphonate and sulfonate groups coordinate to the Ln centers. As a consequence, different H-bonding networks and proton transfer pathways are generated. Proton conductivity measurements have been carried out between 25 and 80 °C at 70-95% relative humidity. The Sm derivative exhibits a conductivity of ∼1 × 10 S·cm and activation energy characteristic of a Grotthuss-type mechanism for proton transfer. Preliminary MEA assays indicate that these layered lanthanide sulfophosphonates assist in maintaining the proton conductivity of Nafion membranes at least up to 90 °C and perform satisfactorily in single proton-exchange membrane fuel cells., The work at UMA was funded by MAT2016-77648-R research grant (Spain) and by Junta de Andalucía through the P12- FQM-1656 research project. M.B.-G. thanks UMA Research Plan for financial support. The work at CSIC-Madrid was funded by PROTONCELL ENE2017-86711-C3-1-R and REPICOMES ENE2017-90932-REDT and MAT2016-81001- P. The work at UoC was supported by grants from the Research Committee of the University of Crete, ELKE (grant no. KA 10329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hybrid membranes with improved methanol crossover for DMFCs applications

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto
  • Pascual-Jose, B.
  • Río, Carmen del
  • García Ballesteros, Olga
  • Ribes-Greus, Amparo
A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the T, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H/O – PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV- (PAID -10-19) SUB-1 grant for R. Teruel.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

40SiO2–40P2O5–20ZrO2 sol-gel infiltrated sSEBS membranes with improved methanol crossover and cell performance for direct methanol fuel cell applications

  • Santiago, O.
  • Mosa Ruiz, Jadra
  • Navarro, Elena
  • Chinarro Martín, Eva
  • Aparicio, Mario
  • Leo, T. J.
  • Del Río, C.
Membranes commonly used in direct methanol fuel cell (DMFC) are expensive and show a great permeability to methanol which reduces fuel utilization and leads to mixed potential at the cathode. In this work, sulfonated styrene-ethylene-butylene-styrene (sSEBS) modified membranes with zirconia silica phosphate sol-gel phase are developed and studied in order to evaluate their potential use in DMFC applications. The synthesized hybrid membranes and sSEBS are subjected to an exhaustive physicochemical characterization by liquid uptake, ion exchange capacity, atomic force microscopy, X-ray photoelectron spectroscopy and dynamic mechanical and thermogravimetric analyses. Likewise, the potential use of the prepared membranes in DMFC is evaluated by means of electrochemical characterizations in single cell, determining the limiting methanol crossover current densities, proton conductivities and DMFC performances. The hybrid membranes show lower water and methanol uptakes, higher stiffness, water retention capability, upper power density and lower methanol crossover than sSEBS and Nafion 112., The authors would like to acknowledge Comunidad de Madrid and European Social Fund (ESF) through the Project S2013/MAE-2975 PILCONAER. The Spanish Ministry of Economy, Industry and Competitiveness is also thanked for the Research Projects MINECO ENE2013-49111-C2-1-R, ENE2014-53734-C2-2-R, ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R and ENE2017-90932-REDT