Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Reseña (Review)

Enzymatic Synthesis of Polyesters and Their Bioapplications: Recent Advances and Perspectives

  • Hevilla, Víctor
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernandez-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] This article reviews the most important advances in the enzymatic synthesis of polyesters. In first place, the different processes of polyester enzymatic synthesis, i.e., polycondensation, ring opening, and chemoenzymatic polymerizations, and the key parameters affecting these reactions, such as enzyme, concentration, solvent, or temperature, are analyzed. Then, the latest articles on the preparation of polyesters either by direct synthesis or via modification are commented. Finally, the main bioapplications of enzymatically obtained polyesters, i.e., antimicrobial, drug delivery, or tissue engineering, are described. It is intended to point out the great advantages that enzymatic polymerization present to obtain polymers and the disadvantages found to develop applied materials., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigacion (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). A.S. acknowledges her "PAID-10-19" postdoctoral contract from the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Viscoelastic Media Combining Ultrasound and Magnetic-Force Induced Vibrations on an Embedded Soft Magnetic Sphere

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Tarazona Tárrega, Rafael
  • Company, Miguel
[EN] We report a method to locally assess the complex shear modulus of a viscoelastic medium. The proposed approach is based on the application of a magnetic force to a millimeter-sized steel sphere embedded in the medium and the subsequent monitoring of its dynamical response. A coil is used to create a magnetic field inducing the displacement of the sphere located inside a gelatin phantom. Then, a phased-array system using 3 MHz ultrasound probe operating in pulse-echo mode is used to track the displacement of the sphere. Experiments were conducted on several samples and repeated as a function of phantom temperature. The dynamic response of the sphere measured experimentally is in good agreement with Kelvin¿Voigt theory. Since the magnetic force is not affected by weak diamagnetic media, our proposal results in an accurate estimation of the force acting on the inclusion. Consequently, the estimated viscoelastic parameters show excellent robustness and the elastic modulus agrees with the measurements using a quasi-static indentation method, obtaining errors below 10% in the whole temperature range. The use of the macroscopic inclusion limits the direct application of this method in a biomedical context, but it provides a robust estimation of the elastic modulus that can be used for material characterization in industrial applications., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities through the "Juan de la Cierva - Incorporacion" under Grant IJC2018-037897-I, in part by the Program "Proyectos I+D+i 2019" under Grant PID2019-111436RB-C22, in part by the Agencia Valenciana de la Innovacio under Grant INNCON/2021/8, in part by Generalitat Valenciana under Grant AICO/2020/268, and in part by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 20142020 under Grant IDIFEDER/2018/022. The work of Alejandro Cebrecos was supported by the Universitat Politecnica de Valencia under Program PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Echegoyen, Y.
  • Lagarón, J. M.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter ¿ molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (¿¿) and the dielectric loss tangent (tan ¿) at wide ranges of frequency (from 10¿2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two ß-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric ¿-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the ß-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol¿1. The ¿-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva-Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

IoT and fog computing-based monitoring system for cardiovascular patients with automatic ECG classification using deep neural networks

  • Rincón-Arango, Jaime Andrés
  • Guerra-Ojeda, Solanye
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Julian, Vicente|||0000-0002-2743-6037
[EN] Telemedicine and all types of monitoring systems have proven to be a useful and low-cost tool with a high level of applicability in cardiology. The objective of this work is to present an IoT-based monitoring system for cardiovascular patients. The system sends the ECG signal to a Fog layer service by using the LoRa communication protocol. Also, it includes an AI algorithm based on deep learning for the detection of Atrial Fibrillation and other heart rhythms. The automatic detection of arrhythmias can be complementary to the diagnosis made by the physician, achieving a better clinical vision that improves therapeutic decision making. The performance of the proposed system is evaluated on a dataset of 8.528 short single-lead ECG records using two merge MobileNet networks that classify data with an accuracy of 90% for atrial fibrillation., This work was partly supported by the Spanish Government (RTI2018-095390-B-C31), Universitat Politecnica de Valencia Research Grant PAID-10-19. S.G-O has been funded by grant PDBCEx COLDOC 679, scholarship programme from COLCIENCIAS (Administrative Department of Science, Technology and Innovation of Colombia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Behaviour of texture-modified meats using proteolytic enzymes during gastrointestinal digestion simulating elderly alterations

  • Gallego, Marta
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] This study aimed to apply different proteolytic enzymes (bromelain, papain, and flavourzyme) to develop texture-modified meats suitable for people with chewing or swallowing problems. The samples were categorised at level 6 (soft and bite-sized food) of the dysphagia diet, characterised in terms of physicochemical and textural parameters, and evaluated for their behaviour during gastrointestinal digestion simulating elderly alterations. In general, the enzyme-treated samples had lower moisture content, weight, and diameter of the piece of meat, and presented colour differences compared to the control samples. Textural analyses did not show significant differences in terms of hardness and cohesiveness for the texture-modified meats, while flavourzyme-treated samples presented less elasticity. Instrumental mastication assay showed the breakdown of samples' structure mainly during the first mastication cycles, with flavourzyme-treated samples presenting slightly higher consistency. The protein digestibility of the meats greatly increased after simulated gastrointestinal digestion, but a decrease in proteolysis for the control and papain-treated samples in the altered gastric model and an increase for flavourzyme-treated samples in the altered both gastric and intestinal model were shown compared to standard conditions. These results allow integrating knowledge to design foods that better meet the requirements of dysphagics or elderly people., M.G. gratefully thanks the Postdoctoral grant (PAID-10-19) from the Universitat Politecnica de Valencia. Authors acknowledge Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-22) for the financial support. Funding for open access charge: CRUE-Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanoparticles of non-porphyrinic covalent organic frameworks as contrast agents for photoacoustic imaging

  • Pi-Martín, Irene
  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Photoacoustic imaging (PAI) is an emerging biomedical modality offering non-invasive, high-resolution imaging with molecular contrast. Its effectiveness for molecular imaging is improved by using external contrast agents such as dyes and nanostructures, which enable targeted imaging, deeper tissue penetration, and enhanced diagnostic accuracy. However, the clinical translation of these agents has been hindered by limitations in biocompatibility, biodegradability, and functionalization versatility. In this study, two porphyrin-free nanoscale covalent organic frameworks (nCOFs), TAPB-PDA and LZU1, were evaluated as novel exogenous contrast agents for PAI. Their photoacoustic responses were systematically measured and compared with traditional contrast agents, such as gold nanoparticles (AuNPs) and ATTO532-labelled mesoporous silica nanoparticles. Experiments at 532 nm across a range of concentrations demonstrated strong photoacoustic signals from TAPB-PDA and LZU-1, with enhanced response at higher concentrations. Besides, both nCOFs also provided detectable signals at the NIR window at the lowest concentration, indicating a broad working range. A nonlinear model of the volume-integrated photoacoustic pressure is also provided. Furthermore, in vitro cytotoxicity assays indicated excellent nCOF biocompatibility, even at higher concentrations. Photostability tests under prolonged pulsed laser irradiation revealed that both nCOFs exhibit good resistance to photobleaching and partial signal recovery under intermittent excitation. Collectively, these findings highlight the potential of TAPB-PDA and LZU-1 nCOFs as biocompatible, biodegradable, and functionally versatile contrast agents for advanced photoacoustic imaging., This work has been supported by the Agencia Estatal de Investigación (AEI, projects PID2019111436RBC22 and PID2022142952OB-100), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, and Programa de Garantía Juvenil I+D EDGJID/2021/189, and NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council (grant SGL2103023). N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva Incorporación , IJC2018- 037897-I, and Ramón y Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19, PAID-PD-22. Irene Pi is grateful for financial support from program CIACIF/2021/403 of Generalitat Valenciana. In addition, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compositional, structural design and nutritional aspects of texture-modified foods for the elderly

  • Gallego Ibáñez, Marta
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] Background: Texture-modified foods (TMF) are commonly used as a therapeutic strategy for people with chewing or swallowing difficulties such as the elderly, which is the fastest growing segment of the global population. These foods need to be soft, safe and easily swallowed as well as have nutritive properties and attractive sensory attributes in order to help overcome physiological dysfunctions and cover specific nutritional requirements.Scope and approach: This review provides an overview about common and novel ingredients and techniques used to obtain TMF with desired textural characteristics as well as methods or processes aimed to improve nutritional and sensory characteristics. Digestibility aspects of TMF are also presented, specially the influence of food matrix structure and material properties on digestion and bioaccessibility of nutrients.Key findings and conclusions: The design of products with textural, nutritional, and sensory characteristics suitable for the elderly should consider not only compositional and structural aspects during formulation but also the modification of food structure during oral processing and gastrointestinal digestion. Increasing the knowledge in these issues will assist the development of products with enhanced functionalities in order to meet the needs of specific populations such as the elderly., Grant RTI2018-098842-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" is acknowledged. M.G. also gratefully thanks the postdoctoral grant (PAID-10-19) from the "Universitat Politecnica de Valencia".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling in vitro gastrointestinal digestion of egg white gel matrix by laser-backscattering imaging

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Gallego Ibáñez, Marta
[EN] The objective of this work was to test the capability of laser-backscattering imaging technique to model changes produced throughout in vitro gastrointestinal digestion of chicken egg white gel as protein matrix model. Evolution of the matrix sample was monitored by analysing protein digestibility, zeta potential, particle size, and imaging every 20 min during the digestion process. Laser-backscattering was based on capturing the diffraction patterns generated by laser-light after being transmitted through matrix samples. Differences in imaging data were observed for the different zones of the studied diffraction patterns. This complexity was solved by a dimensional reduction using multivariate statistics, obtaining R-2 >0.90 in calibration studies. Results indicated that imaging device captured the variance produced due to changes in concentrations of protein compounds in despite of changes produced by pH and reagents addition. Therefore, laser-backscattering imaging was capable of monitoring the digestion of egg white gel during gastric and intestinal phases., Postdoctoral grant (PAID-10-19) from the Universitat Politecnica de Valencia to M.G. is acknowledged. Authors also thank the Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional for the financial support provided through the RTI2018-098842-B-I00 and RTI2018-101599-BC21-AR projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physicochemical Characterization of Texture-Modified Pumpkin by Vacuum Enzyme Impregnation: Textural, Chemical, and Image Analysis

  • Hernández, Sergio
  • Gallego Ibáñez, Marta
  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] Texture-modified pumpkin was developed by using vacuum enzyme impregnation to soften texture to tolerable limits for the elderly population with swallowing and chewing difficulties. The impregnation process and macrostructural and microstructural enzyme action were explored by the laser light backscattering imaging technique and a microscopic study by digital image analysis. Texture was analyzed by a compression assay. The effect of enzyme treatment on antioxidant capacity and sugar content was evaluated and compared to the traditional cooking effect. Image analysis data demonstrated the effectiveness of the impregnation process and enzyme action on plant cell walls. Enzyme-treated samples at the end of the process had lower stiffness values with no fracture point, significantly greater antioxidant capacity and significantly lower total and reducing sugars contents than traditionally cooked pumpkins. The results herein obtained demonstrate the capability of using vacuum impregnation treatment with enzymes to soften pumpkins and their positive effects on antioxidant capacity and sugar content to develop safe and sensory-accepted texture-modified products for specific elderly populations., Open Access funding provided thanks to the CRUE-Universitat Politecnica de Valencia agreement with Springer Nature. Grant RTI2018098842-B-I00 funded by MCIN/AEI/1013039/501100011033 and by ERDF "A way of making Europe" is acknowledged. M.G. gratefully acknowledges the Universitat Politecnica de Valencia for her Postdoctoral grant (PAID-10-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Artificial Pancreas System With Unannounced Meals Based on a Disturbance Observer and Feedforward Compensation

  • Sanz Diaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] This brief is focused on the closed-loop control of postprandial glucose levels of patients with type 1 diabetes mellitus after unannounced meals, which is still a major challenge toward a fully autonomous artificial pancreas. The main limitations are the delays introduced by the subcutaneous insulin pharmacokinetics and the glucose sensor, which typically leads to insulin overdelivery. Current solutions reported in the literature typically resort to meal announcement, which requires patient intervention. In this brief, a disturbance observer (DOB) is used to estimate the effect of unannounced meals, and the insulin pharmacokinetics is taken into account by means of a feedforward compensator. The proposed strategy is validated in silico with the UVa/Padova metabolic simulator. It is demonstrated how the DOB successfully estimates and counteracts not only the effect of meals but also the sudden drops in the glucose levels that may lead to hypoglycemia. For unannounced meals, results show a median time-in-range of 80% in a 30-day scenario with high carbohydrate content and large intrasubject variability. Optionally, users may decide to announce meals. In this case, considering severe bolus mismatch due to carbohydrate counting errors, the median time-in-range is increased up to 88%. In every case, hypoglycemia is avoided., This work was supported in part by the Ministerio de Economia y Competitividad under Grant DPI2016-78831-C2-1-R and in part by the European Union through FEDER Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Triblock SEBS/DVB crosslinked and sulfonated membranes: fuel cell performance and conductivity

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, Carmen
  • Gil-Castell, O.
  • Primaz, Carmem
[EN] A set of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) membranes with 10 or 25 wt.% divinyl-benzene (DVB) as a crosslinking agent were prepared and validated. Physicochemical characterization revealed suitable hydrolytic and thermal stability of photo-crosslinked membranes containing 25%wt. DVB and post-sulfonated. These compositions were evaluated in H2/O2 single cells, and electrical and proton conductivities were furtherly assessed. The membranes with the milder post-sulfonation showed greater proton conductivity than those with excessive sulfonation. In terms of electrical conductivity, a universal power law was applied, and the values obtained were low enough for being used as polyelectrolytes. At the analyzed temperatures, the charge transport process follows a long-range pathway or vehicular model. Finally, fuel cell performance revealed the best behavior for the membrane with 25 wt.% DVB, photo-crosslinked during 30 min and mild sulfonated, with a promising power density of 526 mW·cm-2. Overall, the results obtained highlight the promising fuel cell performance of these cost-effective triblock copolymer-based membranes and indicate that higher sulfonation does not necessarily imply better power density., Ministerio de Economía, Industria y Competitividad, Gobierno de España, Grant/Award Number: ENE2017-86711-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biodegradable and Antimicrobial PLA-OLA Blends Containing Chitosan-Mediated Silver Nanoparticles with Shape Memory Properties for Potential Medical Applications

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-Garcia, Marta
  • Peponi, Laura
  • Leones, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López, Daniel
[EN] To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (T-trans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her ¿APOSTD/2018/228¿ and ¿PAID-10-19¿ postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Dynamic beamforming for large area scan in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, Andreu
[EN] We explore the use of a beamforming method intended for large-area scanning in optical-resolution photoacoustic microscopy. It has been evaluated in a experimental setup that comprises a low-cost laser diode and a phase array with a 128-elements linear probe. Three different beamforming strategies are discussed: no-beamforming, static beamforming and dynamic beamforming. The method has been tested in gelatine-based phantoms as well as ex-vivo organs. Results show that, compared with the other two, dynamic beamforming increases up to 15dB and homogenizes signal-to-noise ratio (SNR) along images of roughly 1 cm2. The method and system presented here could be the baseline for more advanced array-based systems that leverage the low-cost laser sources for clinical applications., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I), and program Proyectos I+D+i 2019 (PID2019-111436RB-C22). Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana and Universitat Politecnica de Val ` encia through the grants APOSTD/2018/229 and program PAID-10-19, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deliberative Context-Aware Ambient Intelligence System for Assisted Living Homes

  • Babli, Mohannad
  • Rincón-Arango, Jaime Andrés
  • Onaindia De La Rivaherrera, Eva|||0000-0001-6931-8293
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Julian, Vicente|||0000-0002-2743-6037
[EN] Monitoring wellbeing and stress is one of the problems covered by ambient intelligence, as stress is a significant cause of human illnesses directly affecting our emotional state. The primary aim was to propose a deliberation architecture for an ambient intelligence healthcare application. The architecture provides a plan for comforting stressed seniors suffering from negative emotions in an assisted living home and executes the plan considering the environment¿s dynamic nature. Literature was reviewed to identify the convergence between deliberation and ambient intelligence and the latter¿s latest healthcare trends. A deliberation function was designed to achieve context-aware dynamic human-robot interaction, perception, planning capabilities, reactivity, and context-awareness with regard to the environment. A number of experimental case studies in a simulated assisted living home scenario were conducted to demonstrate the approach¿s behavior and validity. The proposed methods were validated to show classification accuracy. The validation showed that the deliberation function has effectively achieved its deliberative objectives., This work is supported by the Spanish MINECO Project (No. TIN2017-88476-C2-1-R) and the Universitat Politecnica de Valencia Research (Grant No. PAID-10-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, C.
  • García, O.
[EN] A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the Tg, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H2/O2 - PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV-(PAID -10-19) SUB-1 grant for R. Teruel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A fiber-coupled laser diode design for reflection mode optical resolution photoacoustic microscopy

  • García-Garrigos, Juan José
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Navarro-Calvo, Javier Ángel|||0000-0002-2589-873X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Pulsed Laser Diodes (PLD) are compact and high pulse repetition rate laser sources that show a great potential for low-cost Optical Resolution Photoacoustic Microscopes (OR-PAM). Nevertheless, their non-uniform multimode laser beams are of low quality so that high lateral resolutions with tightly focused beams are difficult to realize at long focusing distances, as required for reflection mode OR-PAM devices of clinical application. A new strategy based on homogenizing and shaping the laser diode beam with a square-core multimode optical fiber allowed to attain competitive lateral resolutions while keeping one centimeter working distance. The theoretical expressions for the laser spot size, determining optical lateral resolution, and the depth of focus are also written for general multimode beams. An OR-PAM system was built in confocal reflection mode with a linear phased-array as the ultrasound receiver in order to test its performance, first, on a resolution test target and, afterwards, on ex vivo rabbit ears to show the system potential for subcutaneous imaging of blood vessels and hair follicles., We are grateful for financial support from Agencia Estatal de Investigacion, Spain (PID2019-111436RBC22/AEI/10.13039/50110001 1033), Generalitat Valenciana, Spain through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, Prometeo CIPROM/2021/003 and Programa de Garantia Juvenil I+D EDGJID/2021/189, Agencia Valenciana de la Innovacio INNVA2/2022/11 and INNVA1/2022/50, and the European Union - Next GenerationEU Programa Investigo INVEST/2022/171. A. Cebrecos is grateful for financial support from Universitat Politecnica de Valencia, Spain through pro-grams PAID-10-19 and Ayuda para potenciar la investigacion postdoc-toral de la UPV PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of chia seed mucilage on technological, sensory, and in vitro digestibility properties of a texture-modified puree

  • Ribes-Llop, Susana
  • Gallego Ibáñez, Marta
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] The impact of adding chia seed mucilage (CSM) as alternative to common thickeners, such as modified starch (MS), in a texture-modified chicken and vegetables puree and their effect on technological, sensory, and in vitro digestibility properties were evaluated and compared. The thickened purees showed weak gel behaviour with good oral consistency, but MS puree was less accepted than CSM regarding the oral adhesiveness. CSM purees presented the highest consistency and viscosity during the oral processing, which would facilitate a safe swallowing process. Its flow behaviour was scarcely affected by the conditions of simulated oral and gastric phases. Protein digestibility was not compromised, whereas the digestion rate of starch in CSM was lower than that of MS. These results demonstrate the feasibility of tailoring the technological, sensory, and digestibility properties of purees by adding different thickeners, and the suitability of CSM to be used in dysphagia-oriented products., Grant RTI2018-098842-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" is acknowledged. M.G. gratefully acknowledge the Postdoctoral grant (PAID-1019) from the "Universitat Politecnica de Valencia" and S.R. the Postdoctoral grant (APOSTD/2020/264) from "Generalitat Valenciana".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact evaluation of deep learning on image segmentation for automatic bluefin tuna sizing

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Martínez-Peiró, Joaquín|||0000-0002-4430-9355
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • De la Gándara, F.
  • Ortega, A.
[EN] This paper evaluates the impact of using deep learning techniques in an automatic fish sizing process. Automatic fish sizing with a non-invasive approach involves working with different views of the fish's body and changing environments, being the stage of extraction of individuals in the image and the quality of the segmentation essential to obtain good sizing measurements. The goal of this work is to improve the results and functionality achieved in our previous studies with conventional segmentation methods based on local thresholding, where different limitations were observed, mainly the necessity of parameters tuning and a high computational cost. The number of detections must also increase significantly to increase the reliability of the statistical results. An approach using convolutional neural networks is proposed for fish detection and segmentation in videos acquired under real conditions, which eliminates the engineering procedure of parameter adjustment and generalises the solution for fish segmentation to deal with different environmental conditions (illumination and water turbidity) and background variability. The results show that the fish sizing procedure is enhanced thanks to the improvement in fish image instance segmentation. In particular, the number of fish measurements increases by up to 2.45 times when using Mask R-CNN and the PointRend module, thus increasing the accuracy of the fish length estimation, and the number of measurements per minute of computing time increases by up to 3.5 times. Our proposal obtains highly accurate fish length estimations in juvenile bluefin tuna based on a stereoscopic vision system and a deformable model of the fish's silhouette, both from the ventral and dorsal perspectives. An important improvement is achieved by applying CNN, as demonstrated by the number of segmented instances, the time required to segment an instance, and the accuracy of the fish sizing achieved., This study forms part of the ThinkInAzul programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and by Generalitat Valenciana (THINKINAZUL/2021/.007). It was also supported by funding from AICO/2021/016 (Generalitat Valenciana), PAID-10-19 (UPV) and IDIFEDER/2018/025 (EUFEDER Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Bluefin Tuna Sizing with a Combined Acoustic and Optical Sensor

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
[EN] A proposal is described for an underwater sensor combining an acoustic device with an optical one to automatically size juvenile bluefin tuna from a ventral perspective. Acoustic and optical information is acquired when the tuna are swimming freely and the fish cross our combined sensor's field of view. Image processing techniques are used to identify and classify fish traces in acoustic data (echogram), while the video frames are processed by fitting a deformable model of the fishes' ventral silhouette. Finally, the fish are sized combining the processed acoustic and optical data, once the correspondence between the two kinds of data is verified. The proposed system is able to automatically give accurate measurements of the tuna's Snout-Fork Length (SFL) and width. In comparison with our previously validated automatic sizing procedure with stereoscopic vision, this proposal improves the samples per hour of computing time by 7.2 times in a tank with 77 juveniles of Atlantic bluefin tuna (Thunnus thynnus), without compromising the accuracy of the measurements. This work validates the procedure for combining acoustic and optical data for fish sizing and is the first step towards an embedded sensor, whose electronics and processing capabilities should be optimized to be autonomous in terms of the power supply and to enable real-time processing., This work was supported by funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU) and PAID-10-19 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Near-optimal feedback control for postprandial glucose regulation in type 1 diabetes

  • Sanz Diaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Romero Vivó, Sergio|||0000-0001-6689-4324
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] This paper is focused on feedback control of postprandial glucose levels for patients with type 1 Diabetes Mellitus. There are two important limitations that make this a challenging problem. First, the slow subcutaneous insulin pharmacokinetics that introduces a significant lag into the control loop. Second, the positivity constraint on the control action, meaning that it is not possible to remove insulin from the body. In this paper, both issues are explicitly considered in the design process using the internal model control framework, to derive a near-optimal feedback controller. Optimality is understood here as minimizing the blood glucose peak after a meal intake and, at the same time, preventing glucose values below a prescribed threshold. It is shown how the proposed controller approaches the optimal closed-loop performance as a limit case. The theoretical results are supported by a numerical example and the feasibility of the overall strategy under uncertainties is illustrated using an extended version UVa/Padova metabolic simulator. (c) 2022 Published by Elsevier Ltd on behalf of ISA., This work was partially supported by: grant DPI2016-78831-C2-1-R funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; grant PID2019-107722RB-C21 funded by MCIN/AEI/10.13039/501100011033; grant PAID-10-19 funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Incorporation of Low-Molecular Weight Poly(Mannitol Sebacate)s on PLA Electrospun Fibers: Effects on the Mechanical Properties and Surface Chemistry

  • Hevilla, V.
  • Echevarría, C.
  • Muñoz-Bonilla, A.
  • Fernández-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] We offer a report on the synthesis of low-molecular weight biobased poly(mannitol sebacate) (PMS) and its functionalization with acrylate groups (PMSAc). These synthesized polyesters were blended at a low level (10 wt%) with poly (lactic acid) PLA to prepare aligned fibers by electrospinning, coupled with a rotatory collector. The obtained fibers were extensively studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and wide-angle X-ray diffraction (WAXS), employing synchrotron radiation. The incorporation of the PMSs on the PLA fibers did not significantly affect the fiber diameters, whereas the alignment was almost maintained. The crystallinity and thermal properties were also slightly modified with the addition of PMSs, and an increase in the degree of crystallinity and in the glass transition temperature of the blend compared to PLA was observed. Remarkably, the PLA/PMSs fibers were more ductile due to the elastomeric character of PMS, with higher values of elongation at break and tensile strengths, and a smaller Young modulus in comparison with the PLA fibers. These modifications of the properties were more noticeable in the case of the acrylated PMS, which also provided readily available functional groups at the surface for further chemical reactions, such as the Michael addition or crosslinking processes., This work was funded by the MICINN (project PID2019-104600RB-I00) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182). The synchrotron experiments were performed at beamlines BL11-NCD-SWEET and MIRAS at ALBA Synchrotron Light Facility and authors would like to thank the help of ALBA staff. Authors also thank M.L. Cerrada for her invaluable discussions on crystallinity. Authors thank T.M. Díez-Rodríguez and E. Blázquez-Blázquez for conducting some tests. A. S. acknowledges her APOSTD/2018/228 and PAID-10-19 postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards a Classifier to Recognize Emotions Using Voice to Improve Recommendations

  • Fuentes-López, José Manuel
  • Rincón Arango, Jaime Andrés
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Botti V.|||0000-0002-6507-2756
[EN] The recognition of emotions in tone voice is currently a tool with a high potential when it comes to making recommendations, since it allows to personalize recommendations using the mood of the users as information. However, recognizing emotions using tone of voice is a complex task since it is necessary to pre-process the signal and subsequently recognize the emotion. Most of the current proposals use recurrent networks based on sequences with a temporal relationship. The disadvantage of these networks is that they have a high runtime, which makes it difficult to use in real-time applications. On the other hand, when defining this type of classifier, culture and language must be taken into account, since the tone of voice for the same emotion can vary depending on these cultural factors. In this work we propose a culturally adapted model for recognizing emotions from the voice tone using convolutional neural networks. This type of network has a relatively short execution time allowing its use in real time applications. The results we have obtained improve the current state of the art, reaching 93.6% success over the validation set., This work is partially supported by the Spanish Government project TIN2017-89156-R, GVA-CEICE project PROMETEO/2018/002, Generalitat Valenciana and European Social Fund FPI grant ACIF/2017/085, Universitat Politecnica de Valencia research grant (PAID-10-19), and by the Spanish Government (RTI2018-095390-B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluación del rendimiento de algoritmos de reconstrucción de imágenes para tomografía fotoacústica

  • Pi-Martín, Irene
  • García-Garrigos, Juan José
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[ES] La tomografía fotoacústica (PAT) es una modalidad emergente de imagen biomédica con gran potencial clínico que combina el uso de técnicas ópticas y acústicas para la formación de imágenes de alta resolución de los tejidos biológicos. La técnica consiste en iluminar un tejido mediante un haz láser pulsado causando un calentamiento local del tejido. Debido al efecto fotoacústico, en el que la energía óptica es absorbida y convertida en energía acústica por expansión termoelástica del tejido, la rarefacción del tejido produce una señal ultrasónica pulsada que puede ser medida con un transductor phased array y convertida en imágenes mediante el uso de algoritmos de reconstrucción. Para reconstruir las imágenes se utilizan algoritmos de conformación como el conformador de retardo y suma, que es computacionalmente eficiente y sencillo de implementar, aunque ofrece baja resolución y contraste de imagen. Para superar estas limitaciones, han surgido mejoras buscando obtener una mejor calidad de imagen. Estas mejoras se basan en combinar las señales de los diferentes elementos, enventanar la señal, o incluso calcular la apodización óptima para cada píxel en función de las señales recibidas por los elementos ultrasónicos. Este trabajo es un estudio numérico y experimental que utiliza la resolución lateral y axial y la relación señal-ruido para evaluar el rendimiento de los principales algoritmos de reconstrucción utilizados en PAT. Los resultados muestran cómo los algoritmos adaptativos permiten mejorar la resolución axial y lateral respecto del conformador de retardo y suma, pero en determinadas situaciones el tamaño de los objetos en la imagen no se corresponde con el tamaño real de los mismos, lo que puede limitar su empleo en la cuantificación del tamaño de estructuras biológicas mediante imagen por tomografía fotoacústica., [EN] Photoacoustic tomography (PAT) is an emerging biomedical imaging modality with great clinical potential that combines the use of optical and acoustic techniques for high-resolution imaging of biological tissues. The technique consists in illuminating a tissue using a pulsed laser beam causing local heating of the tissue. Due to the photoacoustic effect, in which optical energy is absorbed and converted into acoustic energy by thermoelastic expansion of the tissue, the rarefaction of the tissue produces a pulsed ultrasonic signal that can be measured with a phased array transducer and converted into images using reconstruction algorithms. To reconstruct the images, beamforming algorithms such as the delay and sum beamformer are used, which is computationally efficient and simple to implement, although it offers low image resolution and contrast. To overcome these limitations, improvements have been made to obtain better image quality. These improvements are based on combining the signals from the different elements, windowing the signal, or even calculating the optimal apodization for each pixel based on the signals received by the ultrasonic elements. This work is a numerical and experimental study that uses lateral and axial resolution and signal-to-noise ratio to evaluate the performance of the main reconstruction algorithms used in PAT. The results show how the adaptive algorithms allow to improve the axial and lateral resolution with respect to the delay and sum beamformer, but in certain situations the size of the objects in the image does not correspond to their real size, which can limit their effectiveness in the quantification of the size of biological structures., Esta investigación ha sido apoyada por el Ministerio de Ciencia, Innovación y Universidades a través de la beca Juan de la Cierva - Incorporación (IJC2018- 037897-I), y el programa Proyectos I+D+i 2019, España (PID2019-111436RB-C22). A.C. recibió apoyo financiero de la Universitat Politècnica de València, a través del programa PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Accuracy of Continuous Glucose Monitoring during Exercise through Physical Activity Tracking Integration

  • Laguna Sanz, Alejandro José
  • Giménez, Marga
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Current Continuous Glucose Monitors (CGM) exhibit increased estimation error during periods of aerobic physical activity. The use of readily-available exercise monitoring devices opens new possibilities for accuracy enhancement during these periods. The viability of an array of physical activity signals provided by three different wearable devices was considered. Linear regression models were used in this work to evaluate the correction capabilities of each of the wearable signals and propose a model for CGM correction during exercise. A simple two-input model can reduce CGM error during physical activity (17.46% vs. 13.8%, p < 0.005) to the magnitude of the baseline error level (13.61%). The CGM error is not worsened in periods without physical activity. The signals identified as optimal inputs for the model are Mets (Metabolic Equivalent of Tasks) from the Fitbit Charge HR device, which is a normalized measurement of energy expenditure, and the skin temperature reading provided by the Microsoft Band 2 device. A simpler one-input model using only Mets is also viable for a more immediate implementation of this correction into market devices., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Grant Number DPI2016-78831-C2-1-R), the European Union (FEDER funds), and the Vicerectorate of Research, Innovation and Technology Transference from the Universitat Politecnica de Valencia (Grant Number PAID-06-18). We would like to acknowledge the work performed by Josep Vehí, Lyvia Biagi, Ignacio Conget and Carmen Quirós. We thank all the participants and clinical staff who participated in clinical acquisition and pre-formatting of data for study, without whom none of this work would have been possible.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Food matrix impact on rheological and digestive properties of protein-enriched and texture-modified mushroom creams

  • Gallego, Marta
  • Ribes-Llop, Susana
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] This study aimed to investigate the food matrix impact of adding two different proteins, whey protein (WP), bovine gelatin protein (BG) or their respective hydrolysates (WPH or BGH), and two hydrocolloids, neutral modified waxy-maize starch (MS) or charged carboxymethyl cellulose (CMC), on flow and viscoelastic proper-ties, oral processing, and in vitro gastrointestinal digestion of protein-enriched and texture-modified mushroom creams. All the samples exhibited a weak gel behaviour; however, BG-MS, WP-CMC, WPH-CMC, and BGH-CMC mushroom creams would be considered safer to swallow by dysphagic and elderly people due to their good elasticity degree and resistance to deformation. The addition of saliva during oral processing produced remarkable changes in consistency, adhesiveness, and viscosity of samples containing MS as thickener, which could prevent a safe swallowing. Samples with hydrolysates as protein source and the anionic CMC as thickener could form a compact structure that led to high viscosity and consistency values up to the gastric phase, but they could reduce protein digestibility at the end of the simulated gastrointestinal digestion. This study evidences how protein-hydrocolloid interactions and the food matrix determine the rheological and digestibility properties of samples, which must be considered in the design of foods to meet the specific needs of certain population groups such as dysphagic or elderly people., Grant RTI 2018-098842-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" is acknowledged. M.G. gratefully thanks the Postdoctoral grant (PAID-10-19) from the Universitat Politecnica de Valencia and S.R. acknowledges the Generalitat Valenciana for her Postdoctoral Fellowship (APOSTD/2020/264).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards the edge intelligence: Robot assistant for the detection and classification of human emotions

  • Rincón Arango, Jaime Andrés
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] Deep learning is being introduced more and more in our society. Nowadays, there are very few applications that do not use deep learning as a classification tool. One of the main application areas is focused on improving people¿s life quality, allowing to create personal assistants with canned benefits. More recently, with the proliferation of mobile computing and the emergence of the Internet of Things (IoT), billions of mobile and IoT devices are connected to the Internet. This allows the generation of millions of bytes of information about sensors, images, sounds, etc. Driven by this trend, there is an urgent need to push the IoT frontiers to the edge of the network, in order to decrease this massive sending of information to large exchanges for analysis. As a result of this trend, a new discipline has emerged: edge intelligence or edge AI, a widely recognised and promising solution that attracts with special interest to the community of researchers in artificial intelligence. We adapted edge AI to classify human emotions. Results show how edge AI-based emotion classification can greatly benefit in the field of cognitive assistants for the elderly or people living alone., This work was partly supported by the Generalitat Valenciana (PROMETEO/2018/002) and by the Spanish Government (RTI2018-095390-B-C31). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards a Dynamic Edge AI Framework applied to autonomous driving cars

  • Muratore, G.
  • Rincón Arango, Jaime Andrés
  • Greco, G.
  • Fortino, G.
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] This work proposes an innovative solution in the field of Edge AI in order to efficiently exploit new hardware components available on the market at low cost. Edge AI means that algorithms are processed locally on a hardware device. The algorithms use data (sensor data or signals) that are created on the own device. The idea of this paper focuses on demonstrating the validity of the proposed solution by implementing an autonomous driving system that exploits communication between intelligent agents. In this case, our self-driving cars are equipped with a low-cost device that allows you to recognise objects along the way and consequently take actions by running a machine learning model. The presence of a machine learning model also allows the developer to modify it by extending the flexibility and application possibilities of the proposed solution., This work was partly supported by: ERASMUS+ Programme, KA1 Istruzione Superiore, Carta Erasmus+: 29388-EPP-1-2014-1-IT-EPPKA3-ECHE, ACCORDO PER LA MOBILITÀ ERASMUS PER STUDIO - a.a. 2019/2020, Progetto n o 2019-1-IT02-KA103-061203 - CUP: H25J19000080006, Generalitat Valenciana (PROMETEO/2018/002). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular Mobility in Oriented and Unoriented Membranes Based on Poly[2-(Aziridin-1-yl)ethanol]

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Bogdanowicz, Krzysztof Artur
  • Badia, José D.
  • Sáenz de Juano-Arbona, Victor
  • Graf, Robert
  • Reina, José A.
  • Giamberini, Marta
[EN] Unoriented and oriented membranes based on dendronized polymers and copolymers obtained by chemical modification of poly[2-(aziridin-1-yl) ethanol] (PAZE) with the dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy]benzoate were considered. DSC, XRD, CP-MAS NMR and DETA, contribute to characterize the tendency to crystallize, the molecular mobility of the benzyloxy substituent, the dendritic liquid crystalline group and the clearing transition. The orientation of the mesogenic chain somewhat hindered this molecular motion, especially in the full substituted PAZE. The fragility, free volume and thermal expansion coefficients of these membranes near the glass transition are related to the orientation and the addition of the dendritic groups. PAZE-based membranes combine both order and mobility on a supramolecular and macroscopic level, controlled by the dendritic group and the thermal orientation, and open the possibility of preparing membranes with proper channel mobility that promotes selective ionic transport., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant POLYDECARBOCELL (ENE2017-86711-C3-1-R, ENE2017-86711-C3-3-R). The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF). Universitat Politècnica de València is acknowledged for the post-doctoral aid for R.T.-J., under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatial resolution and reconstructed size accuracy using advanced beamformers in linear array-based PAT systems

  • Pi-Martín, Irene
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Limitations associated with linear-array probes in photoacoustic tomography are partially compensated by using advanced beamformers that exploit the temporal and spatial coherence of the recorded signals, such as Delay Multiply and Sum (DMAS), Minimum Variance (MV) or coherence factor (CF), among others. However, their associated signal processing leads to an overestimation of the spatial resolution, as well as alterations in the reconstructed object size. Numerical and experimental results reported here support this hypothesis. First, we show that the Rayleigh criterion (RC) is the most suitable choice to characterize the spatial resolution instead of the Point Spread Function (PSF) when considering advanced beamformers. Then, we observe that several advanced beamformers fail to properly reconstruct target sizes slightly above the spatial resolution, underestimating their size. This work sheds light on the suitability of this type of beamformers combined with linear probes for determining sizes and morphology in photoacoustic images., We are grateful for financial support from Agencia Estatal de Investigación (PID2019-111436RBC22 and PID2022-142719OB-C21), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004 and Programa de Garantía Juvenil I+D EDGJID/2021/189, and Agéncia Valenciana de la Innovació through Grant INNVA1/2022/50. N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva - Incorporación , IJC2018-037897-I and Ramón &#119910; Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19 PAID-PD-22. Irene Pi is grateful for financial support from Generalitat Valenciana through programme CIACIF/2021/403.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Beamforming for large-area scan and improved SNR in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, A.
[EN] Beamforming enhances the performance of array-based photoacoustic microscopy (PAM) systems for large-area scan. In this study, we quantify the imaging performance of a large field-of-view optical-resolution photoacoustic-microscopy system using an phased-array detector. The system combines a low-cost pulsed-laser diode with a 128-element linear ultrasound probe. Signal-to-noise ratio (SNR) and generalized contrast-to-noise ratio (gCNR) are quantified using the phased-array detector and applying three beamforming strategies: a no-beamforming method equivalent to a single-element flat transducer, a fixed focus beamforming method that mimics a single-element focused transducer, and a dynamic focus beamforming using a delay-and-sum (DAS) algorithm. The imaging capabilities of the system are demonstrated generating high-resolution images of tissue-mimicking phantoms containing sub-millimetre ink tubes and an ex vivo rabbit¿s ear. The results show that dynamic focus DAS beamforming increases and homogenizes SNR along 1-cm2 images, reaching values up to 15 dB compared to an unfocused detector and up to 30 dB compared to out-of-focus regions of the fixed focus configuration. Moreover, the obtained values of gCNR using the DAS beamformer indicate an excellent target visibility, both on phantoms and ex vivo. This strategy makes it possible to scan larger surfaces compared to standard configurations using single-element detectors, paving the way for advanced array-based PAM systems., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant "Juan de la Cierva - Incorporación" (IJC2018-037897-I), and program "Proyectos I+D+i 2019, Spain" (PID2019-111436RB-C22), by Programa Operativo Empleo Juvenil, Spain 2014-2020 (MIN19-VAL-I3M-004), and by the Agència Valenciana de la Innovació, Spain through grant INNCON00/2020/009. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana, Spain and Universitat Politècnica de València, Spain through the grants APOSTD/2018/229 and program PAID-10-19, respectively. A.D. received support from Generalitat Valenciana, Spain through grant GJIDI/2018/A/249.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Developing IoT Artifacts in a MAS Platform

  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Terrasa Barrena, Andrés Martín|||0000-0003-1991-1691
  • Rincón-Arango, Jaime Andrés
[EN] The Internet of Things (IoT) is a growing computational paradigm where all kinds of everyday objects are interconnected, forming a vast cyberphysical environment at the edge between the virtual and the real world. Since the emergence of the IoT, Multi-Agent Systems (MAS) technology has been successfully applied in this area, proving itself to be an appropriate paradigm for developing distributed, intelligent systems containing sets of IoT devices. However, this technology still lacks effective mechanisms to integrate the enormous diversity of existing IoT devices systematically. In this context, this paper introduces the concept of the IoT artifact as a new interface abstraction for the development of MAS based on IoT devices. The IoT artifact strictly conforms to the Agents and Artifacts (A&A) meta-model, and it also adopts the programming model of the SPADE multi-agent platform, providing both a consistent theoretical framework and a practical model for real-world applications., This work is partially supported by Grant RTI2018-095390-B-C31 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the Universitat Politecnica de Valencia (Research Project PAID-10-19), and the Generalitat Valenciana (Project PROMETEO/2018/002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of cooking on protein digestion and antioxidant activity of different legume pastes

  • Gallego Ibáñez, Marta
  • Arnal-Salinas, Milagros|||0000-0002-9301-2478
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Talens Oliag, Pau|||0000-0001-7318-3336
[EN] Legumes are protein-rich foods that can be used to prepare pastes or pureed foods suitable for babies and the elderly. The aims of this study were the characterization of different legume pastes (from soybean, lentil, and pea) subjected to three processing methods (ordinary cooking, pressure cooking, and microwave) and the evaluation of protein digestion and antioxidant activity during simulated gastrointestinal digestion (GID). The different cooking methods of legumes led to differences in the physicochemical properties of the pastes, as well as on the textural and viscoelastic characteristics, except for soybean samples, despite all the pastes presenting elastic properties and weak gel behavior. Cooking followed by GID improved the protein digestibility and antioxidant activity of the legumes, which was attributed to released peptides and amino acids more than free phenolics. However, the fate and extent at each digestion stage was different according to the legume type and cooking method, as it would be influenced by the matrix structure and interaction between components. This work has expanded knowledge about the properties, digestibility, and antioxidant activity of different cooked legumes for a future design of pastes., This research was funded by the RTI2018-098842-B-I00 project from the Spanish Ministry of Science, Innovation, and Universities.