Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Echegoyen, Y.
  • Lagarón, J. M.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter ¿ molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (¿¿) and the dielectric loss tangent (tan ¿) at wide ranges of frequency (from 10¿2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two ß-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric ¿-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the ß-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol¿1. The ¿-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva-Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Polysaccharide FucoPol-Based Nanofiber Systems

  • Vázquez-González, Yuliana
  • Prieto, Cristina
  • Stojanovic, Milan
  • Torres, Cristiana A.V.
  • Freitas, Filomena
  • Ragazzo-Sánchez, Juan Arturo
  • Calderón-Santoyo, Montserrat
  • Lagaron, José M.
[EN] The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol¿s low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications., This study was supported by the CYTED thematic network (code 319RT0576), the Spanish Ministry of Science and Innovation (MICI) project RTI-2018-097249-B-C21 and H2020 EU project USABLE PACKAGING (reference number 836884). This work received financial support from FCT¿Fundação para a Ciência e a Tecnologia, I.P. (Portugal), in the scope of projects UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences¿UCIBIO, and project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy¿i4HB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Barrier biopaper multilayers obtained by impregnation of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with protein and polysaccharide hydrocolloids

  • Melendez-Rodriguez, Beatriz
  • M'Bengue, Marie-Stella
  • Cabedo, Luis
  • Prieto, Cristina
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Multilayer biopapers composed of two electrospun layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were impregnated, at the inner side of one of the layers, with cellulose nanocrystals (CNCs) and their composites with hydrocolloids, to develop high-barrier fully biobased structures. The study aimed for the first time at comparing the impregnation of electrospun fibers with several biopolymer solutions. Thus, neat CNCs, and CNCs mixed as a minor fraction, that is, 2 wt%, with gelatin (GE), agar (AG), xanthan gum (XG), and gum arabic (GA) were assessed in their potential to improve the barrier properties of PHBV. Glycerol plasticizer was added to the composite formulations. The impregnated electrospun multilayer mats were subsequently annealed, below the PHBV melting point, to yield continuous films by an interfiber coalescence process, so-called biopapers, and thereafter characterized to evaluate their potential for high barrier food packaging applications. The morphological characterization revealed good interlayer adhesion, more noticeably for those containing CNCs and their nanocomposites with AG and XG. From their mechanical response, it was inferred that the material behavior was governed mainly by the rigidity of the PHBV substrates, and this could not be significantly improved by impregnation with any of the various hydrocolloids. Whereas the water vapor barrier was not seen to improve in any of the samples, the barrier to the organic vapor limonene, used as a standard for aroma barrier, was however improved in the samples impregnated with AG and XG composites. Interestingly, the oxygen barrier properties were significantly improved but only by impregnation with pure CNCs. This study reports for the first time a scalable impregnation technology approach to produce fully biobased barrier multilayers., This research work was funded by the H2020 EU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21. Ms. Beatriz Melendez-Rodriguez would like to acknowledge the MICI for her FPI fellowship (BES-2016-077972) and Dr. Torres-Giner for his MICI Juan de la Cierva¿Incorporacion contract (IJCI-2016-29675). The authors would also like to acknowledge the Unidad Asociada IATA (CSIC)-UJI in Polymer Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Blends of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with Fruit Pulp Biowaste Derived Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate-co-3-Hydroxyhexanoate) for Organic Recycling Food Packaging

  • Melendez-Rodriguez, Beatriz
  • Reis, Maria A. M.
  • Silva, Fernando
  • Matos, Mariana
  • Cabedo, Luis
  • Lagarón, José María
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, a new poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) [P(3HB-co-3HV-co-3HHx)] terpolyester with approximately 68 mol% of 3-hydroxybutyrate (3HB), 17 mol% of 3-hydroxyvalerate (3HV), and 15 mol% of 3-hydroxyhexanoate (3HHx) was obtained via the mixed microbial culture (MMC) technology using fruit pulps as feedstock, a processing by-product of the juice industry. After extraction and purification performed in a single step, the P(3HB-co-3HV-co-3HHx) powder was melt-mixed, for the first time, in contents of 10, 25, and 50 wt% with commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Thereafter, the resultant doughs were thermo-compressed to obtain highly miscible films with good optical properties, which can be of interest in rigid and semirigid organic recyclable food packaging applications. The results showed that the developed blends exhibited a progressively lower melting enthalpy with increasing the incorporation of P(3HB-co-3HV-co-3HHx), but retained the PHB crystalline morphology, albeit with an inferred lower crystalline density. Moreover, all the melt-mixed blends were thermally stable up to nearly 240 degrees C. As the content of terpolymer increased in the blends, the mechanical response of their films showed a brittle-to-ductile transition. On the other hand, the permeabilities to water vapor, oxygen, and, more notably, limonene were seen to increase. On the overall, this study demonstrates the value of using industrial biowaste derived P(3HB-co-3HV-co-3HHx) terpolyesters as potentially cost-effective and sustainable plasticizing additives to balance the physical properties of organic recyclable polyhydroxyalkanoate (PHA)-based food packaging materials, This research was supported by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo-Figuerez, María
  • Prieto, Cristina
  • Arnal, Carmen
  • Cabedo, Luis
  • Lagaron, José M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-BC1 and PID2021-128749OB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Valorization of Municipal Biowaste into Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers for Food Packaging Applications

  • Meléndez-Rodríguez, Beatriz
  • Lorini, Laura
  • Valentino, Francesco
  • Sammon, Chris
  • Cabedo, Luis
  • Lagaron, Jose Maria
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] The present study reports on the production and characterization of a new biopackaging material made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from municipal biowaste (MBW) and produced by the mixed bacterial culture technology. After purification and extraction, the MBW-derived PHBV was processed by electrospinning to yield defect-free ultrathin fibers, which were thermally post-treated. Annealing at 130 degrees C, well below the biopolymer's melting temperature (T-m), successfully yielded a continuous film resulting from coalescence of the electrospun fibrillar morphology, the so-called biopaper, exhibiting enhanced optical and color properties compared to traditional melt compounding routes. The crystallinity and crystalline morphology were comprehensively studied as a function of temperature by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and combined time-resolved synchrotron small- and wide-angle X-ray scattering (SAXS and WAXS) experiments, which clearly indicated that the molecular order within the copolyester was improved up to a maximum at 130 degrees C, and then it decreased at the biopolymer's T-m. It was hypothesized that by annealing at the temperature at which the thermally induced molecular order is maximized, the fibers generated sufficient mobility to align alongside, hence reducing surface energy and porosity. The data suggest that this material shows a good balance between enhanced mechanical and improved barrier properties to vapors and gases in comparison to traditional paper and other currently used petroleum-derived polymers, thus presenting significant potential to be part of innovative food biopackaging designs for the protection and preservation of foods in a circular bioeconomy scenario., The Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and EU projects H2020 YPACK (reference number 773872) and H2020 USABLE (reference number 836884) are acknowledged for funding support. B.M.-R. and S.T.-G. would also like to thank MICI for the FPI fellowship (BES-2016-077972) and the Juan de la Cierva IncorporaciOn contract (IJCI-2016-29675), respectively. The ALBA Synchrotron, Spain, is also acknowledged for the funding received through the project proposal 2018022619. The authors also thank the "Unidad Asociada CSIC-UJI in Polymers Technology".
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Contribución de congreso (ConferenceOutput)

From industrial wastewater to high performance bioplastics: knowledge integration for efficient decision-making

  • Mauricio Iglesias, Miguel
  • Saavedra del Oso, Mateo
  • Lu Chau, Thelmo Alejandro
  • Hospido Quintana, Almudena
The potential processes for the production of bioplastics from industrial wastewater are characterised by the combination of technologies of uneven maturity. This contribution deals with integration of knowledge of different sources, namely: mathematical models, literature data processed in a meta analysis and experimental data from the most novel technologies. From this knowledge integration, the evaluation of the environmental performance of the whole value chain is performed by life cycle assessment. Carrying out this evaluation in an early-stage of development is intended to help decision-making in the optimisation and selection of technologies and target efforts in the improvement of sustainability hot-spots.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Contribución de congreso (ConferenceOutput)

Knowledge integration for efficient decicion-making: a case study from fish-canning wastewater valorization

  • Saavedra del Oso, Mateo
  • Lu Chau, Thelmo Alejandro
  • Mauricio Iglesias, Miguel
  • Hospido Quintana, Almudena
The recovery of resources from food industries wastewater and further transformation into high performance biodegradable plastics is an ambitious objective which fulfils the objectives of circular economy and SDGs 6 and 14: i) a potentially harmful water pollutant if discharged is converted instead into an added-value product; ii) ensuring biodegradability in marine conditions, the plastic pollution is greatly minimised. In the framework of H2020 project USABLE-PACKAGING (www.usable-packaging.eu), we are carrying out a comprehensive analysis of a selection of representative value chains, from the industrial effluent to the final bioplastic product and potential by-products to ensure its economic and environmental sustainability. In particular, we are integrating knowledge from different sources, namely from deliberately designed experiments, mathematical models and literature reviews, for the holistic assessment of the environmental performance of several scenarios, with different wastewater characteristics (i.e. substrate) and a diverse range of bioplastic applications (i.e. final product).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Environmental assessment of complex wastewater valorisation by polyhydroxyalkanoates production

  • Roibás Rozas, Alba
  • Mosquera Corral, Anuska
  • Hospido Quintana, Almudena
Polyhydroxyalkanoates (PHA) are biodegradable polymers with renewable origin that are expected to substitute conventional petrochemical plastics. However, before they are commercialized, life-cycle environmental validation is needed, to prove that there is an actual benefit with the replacement of non-renewable plastics with PHA. Nowadays, environmental evaluations assessing bioplastics production at full-scale are scarce due to the lack of data, so experimental results were used to evaluate the feasibility of PHA production employing high load wastewater. A three-stage PHA production system utilising a mixed microbial culture (MMC) was successfully operated for two years employing complex wastewater from a fish-canning industry. The results obtained were scaled-up to define and compare a circular economy scenario performance, with PHA production, with the current linear approach (i.e. effluent generation, treatment and discharge). To the best of our knowledge, this is the first time that the environmental performance of a MMC-based full-scale PHA production system using saline wastewater is evaluated. Results show an average improvement of ca. 25% for nine out of ten studied categories if the circular economy approach is implemented. The sludge management strategy was a key factor for the environmental validation of the process, and if composting is applied instead of anaerobic digestion, the improvement is reported in eight categories. When a more conservative replacement yield of fossil-based plastic was tested, the circular economy approach was the preferable option in 8 out of 10 categories. The significance of the downstream process was also confirmed by this study, although it was not a barrier to show the feasibility of producing added-value bioproducts under a circular economy approach. Finally, this work proposes new process integration strategies to reduce the environmental burdens of PHA production and increase the body of knowledge on MMC-based processes, an area where LCA case studies are still scarce
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Contribución de congreso (ConferenceOutput)

Preliminary optimization of the environmental performance of PHA downstream processing

  • Saavedra del Oso, Mateo
  • Mauricio Iglesias, Miguel
  • Hospido Quintana, Almudena
As downstream processing has been identified as a bottleneck for the sustainable development of the polyhydroxyalkanoates (PHAs) value chains, this work aims to provide new insights for the optimization of its environmental performance. After identifying the most promising methods for PHA recovery and purification, four processes with two different system functions,high- and low-grade PHA, were defined and scaled up. The environmental performance of these processes was evaluated by life cycle assessment (LCA). Processes based on solvent extraction showed a worse environmental performance due to the high energy requirements of solvents recovery. Processes relying on chemical digestion showed a better environmental performance when combined with other technologies such as high pressure homogenization, which allows a reduction of the amount of chemicals employed. Therefore, two main improvement actions were proposed to overcome these hotspots and estimate the environmental burdens reduction: heat integration in larger facilities would reduce the heat duty, while introducing a chemical recovery unit or combining chemical digestion with other technologies would reduce those impacts related to chemicals consumption. Through this work, it is demonstrated that the environmental performance of PHA downstream processing can be improved if the process design include life cycle assessment from its conception
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Evaluation and optimization of the environmental performance of PHA downstream processing

  • Saavedra del Oso, Mateo
  • Mauricio Iglesias, Miguel
  • Hospido Quintana, Almudena
Biobased and biodegradable materials such as polyhydroxyalkanoates (PHA) have great potential as an alternative for conventional oil-based plastics in consumer goods and medical applications, but their total market share is still marginal due to their high production costs. Downstream processing, with high energy demand and significant requirements in oil-derived solvents and chemicals, has been identified as one bottleneck in the PHA value chain. Hence, a thorough study of the environmental performance of PHA recovery processes is essential to promote their applicability. This work provides valuable insights on PHA downstream processing environmental hotspots and how to optimize them accordingly. Eight PHA downstream alternative processes for both high-grade and low-grade purification are evaluated from a techno-economic and an environmental perspective, assessing scale-up possibilities and challenges. To reach this goal, both scenario definition and process design were supported by a systematic review of available PHA downstream methods and related life cycle assessments. Methods relying on solvent extraction require large amounts of energy for solvent recovery, and thus, their higher performance in impurity removal also entails larger costs and impacts in all categories, when compared to mechanical disruption or chemical digestion. Therefore, solvent extraction is only recommended for those cases where a higher quality is required, or solvents can be reasonably obtained from an integrated biorefinery. Chemical digestion can be optimized by adding a chemicals recovery unit, while mechanical disruption appears to be the most promising technology in terms of environmental performance. Through this technoeconomic and environmental assessment, it is proved that PHAs can be attractive materials for a sustainable bioeconomy if the process and product design incorporate life cycle assessment such as the developed in this work
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Improving the performance of biobased polyurethane dispersion by the incorporation of photo-crosslinkable coumarin.

  • Germán Ayuso, Lorena
  • Cuevas, José María
  • Seoane Rivero, Rubén
  • Navarro, Rodrigo
  • Marcos Fernández, Ángel
  • Vilas Vilela, José Luis
High biobased carbon content polyurethane dispersions (PUD) are a more sustainable alternative to conventional oil-derived waterborne dispersions in coatings. However, there are still many performance limitations from restricted availability of effective renewable monomers and oligomers. This work demonstrates the improvement of the properties of high biobased content PUD and derived coating by introducing a photo-reversibly crosslinkable coumarin as chain extender within the structure. The effect of partial substitution of 1,3-propanediol biobased by a di-hydroxy photo-reactive cyclic coumarin on the particle size and the stability was analyzed by dynamic light scattering (DLS) and multiple light scattering (MLS). The lateral and more rigid structure of coumarin involved a moderated increment in particle size without significant effect on the dispersion stability for at least 45 days. Associated improvement in hardness and toughness was also demonstrated by tensile test, pendulum hardness, pencil hardness and scratch resistance test. Furthermore, controlled UV irradiation of the polyurethane gave rise to a mechanical performance adjustment from reversible photo-crosslinking and scission of the coumarin molecules within the macromolecular structure. A 70% dimerization degree of the coumarin within the polyurethane film by UV light provided a partially reversible threefold higher tensile strength than that of the original biobased formulation as an effective tool to tune the response of biobased polyurethanes., This work was financially supported by the biobased Industries Undertaking (JU) under the European Union’s Horizon 2020 research and innovation programme under USABLE PACKGING project grant agreement No 836884. The JU receives support from the European Union’s Horizon 2020 research and innovation programme and the Bio Based Industries Consortium. The authors also gratefully acknowledge the financial support from the Basque Government (ELKARTEK programme, Research Project KK-2022/00109 – FRONTIERS 2022).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorization of Municipal Biowaste into Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers for Food Packaging Applications

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Lorini, L.
  • Valentino, F.
  • Sammon, C.
  • Cabedo, Luis
  • Lagarón Cabello, José María
The present study reports on the production and characterization of a new biopackaging material made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from municipal biowaste (MBW) and produced by the mixed bacterial culture technology. After purification and extraction, the MBW-derived PHBV was processed by electrospinning to yield defect-free ultrathin fibers, which were thermally post-treated. Annealing at 130 °C, well below the biopolymer’s melting temperature (Tm), successfully yielded a continuous film resulting from coalescence of the electrospun fibrillar morphology, the so-called biopaper, exhibiting enhanced optical and color properties compared to traditional melt compounding routes. The crystallinity and crystalline morphology were comprehensively studied as a function of temperature by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and combined time-resolved synchrotron small- and wide-angle X-ray scattering (SAXS and WAXS) experiments, which clearly indicated that the molecular order within the copolyester was improved up to a maximum at 130 °C, and then it decreased at the biopolymer’s Tm. It was hypothesized that by annealing at the temperature at which the thermally induced molecular order is maximized, the fibers generated sufficient mobility to align alongside, hence reducing surface energy and porosity. The data suggest that this material shows a good balance between enhanced mechanical and improved barrier properties to vapors and gases in comparison to traditional paper and other currently used petroleum-derived polymers, thus presenting significant potential to be part of innovative food biopackaging designs for the protection and preservation of foods in a circular bioeconomy scenario., The Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and EU projects H2020 YPACK (reference number 773872) and H2020 USABLE (reference number 836884) are acknowledged for funding support. B.M.-R. and S.T.-G. would also like to thank MICI for the FPI fellowship (BES-2016-077972) and the Juan de la Cierva–Incorporación contract (IJCI-2016-29675), respectively. The ALBA Synchrotron, Spain, is also acknowledged for the funding received through the project proposal 2018022619. The authors also thank the “Unidad Asociada CSIC-UJI in Polymers Technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Blends of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with Fruit Pulp Biowaste Derived Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate-co-3-Hydroxyhexanoate) for Organic Recycling Food Packaging

  • Meléndez-Rodríguez, Beatriz
  • Torres-Giner, Sergio
  • Reis, Maria A.M.
  • Silva, Fernando
  • Matos, Mariana
  • Cabedo, Luis
  • Lagarón Cabello, José María
In the present study, a new poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) [P(3HB-co-3HV-co-3HHx)] terpolyester with approximately 68 mol% of 3-hydroxybutyrate (3HB), 17 mol% of 3-hydroxyvalerate (3HV), and 15 mol% of 3-hydroxyhexanoate (3HHx) was obtained via the mixed microbial culture (MMC) technology using fruit pulps as feedstock, a processing by-product of the juice industry. After extraction and purification performed in a single step, the P(3HB-co-3HV-co-3HHx) powder was melt-mixed, for the first time, in contents of 10, 25, and 50 wt% with commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Thereafter, the resultant doughs were thermo-compressed to obtain highly miscible films with good optical properties, which can be of interest in rigid and semirigid organic recyclable food packaging applications. The results showed that the developed blends exhibited a progressively lower melting enthalpy with increasing the incorporation of P(3HB-co-3HV-co-3HHx), but retained the PHB crystalline morphology, albeit with an inferred lower crystalline density. Moreover, all the melt-mixed blends were thermally stable up to nearly 240 °C. As the content of terpolymer increased in the blends, the mechanical response of their films showed a brittle-to-ductile transition. On the other hand, the permeabilities to water vapor, oxygen, and, more notably, limonene were seen to increase. On the overall, this study demonstrates the value of using industrial biowaste derived P(3HB-co-3HV-co-3HHx) terpolyesters as potentially cost-effective and sustainable plasticizing additives to balance the physical properties of organic recyclable polyhydroxyalkanoate (PHA)-based food packaging materials., This research was supported by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21 and by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Teruel Juanes, R.
  • Echegoyen, Yolanda
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
  • Ribes-Greus, Amparo
The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter – molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (ε′) and the dielectric loss tangent (tan δ) at wide ranges of frequency (from 10−2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two β-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric α-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the β-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol−1. The α-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva—Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development and Characterization of Electrospun Fiber-Based Poly(ethylene-co-vinyl Alcohol) Films of Application Interest as High-Gas-Barrier Interlayers in Food Packaging

  • Meléndez-Rodríguez, Beatriz
  • Torres Giner, Sergio
  • Zavagna, L.
  • Sammon, C.
  • Cabedo, Luis
  • Prieto López, Cristina
  • Lagarón Cabello, José María
In the present study, poly(ethylene-co-vinyl alcohol) with 44 mol % ethylene content (EVOH44) was managed to be processed, for the first time, by electrospinning assisted by the coaxial technology of solvent jacket. In addition to this, different suspensions of cellulose nanocrystals (CNCs), with contents ranging from 0.1 to 1.0 wt %, were also electrospun to obtain hybrid bio-/non-bio nanocomposites. The resultant fiber mats were thereafter optimally annealed to promote interfiber coalescence at 145 °C, below the EVOH44 melting point, leading to continuous transparent fiber-based films. The morphological analysis revealed the successful distribution of CNCs into EVOH44 up to contents of 0.5 wt %. The incorporation of CNCs into the ethylene-vinyl alcohol copolymer caused a decrease in the crystallization and melting temperatures (TC and Tm) of about 12 and 7 °C, respectively, and also crystallinity. However, the incorporation of CNCs led to enhanced thermal stability of the copolymer matrix for a nanofiller content of 1.0 wt %. Furthermore, the incorporation of 0.1 and 0.5 wt % CNCs produced increases in the tensile modulus (E) of ca. 38% and 28%, respectively, but also yielded a reduction in the elongation at break and toughness. The oxygen barrier of the hybrid nanocomposite fiber-based films decreased with increasing the CNCs content, but they were seen to remain high barrier, especially in the low relative humidity (RH) regime, i.e., at 20% RH, showing permeability values lower than 0.6 × 10−20 m3·m·m−2·Pa−1·s−1. In general terms, an optimal balance in physical properties was found for the hybrid copolymer composite with a CNC loading of 0.1 wt %. On the overall, the present study demonstrates the potential of annealed electrospun fiber-based high-barrier polymers, with or without CNCs, to develop novel barrier interlayers to be used as food packaging constituents., This research work was funded by the EU H2020 BBI JU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Polysaccharide FucoPol-Based Nanofiber Systems

  • Vázquez González, Yuliana
  • Prieto López, Cristina
  • Stojanovic, Milan
  • Torres, Cristiana A. V.
  • Freitas, Filomena
  • Ragazzo Sánchez, Juan Arturo
  • Calderón Santoyo, Montserrat
  • Lagarón Cabello, José María
The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol's low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications., This study was supported by the CYTED thematic network (code 319RT0576), the Spanish Ministry of Science and Innovation (MICI) project RTI-2018-097249-B-C21 and H2020 EU project USABLE PACKAGING (reference number 836884). This work received financial support from FCT—Fundação para a Ciência e a Tecnologia, I.P. (Portugal), in the scope of projects UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences—UCIBIO, and project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy—i4HB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Barrier biopaper multilayers obtained by impregnation of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with protein and polysaccharide hydrocolloids

  • Meléndez-Rodríguez, Beatriz
  • M'Bengue, Marie Stella
  • Torres-Giner, Sergio
  • Cabedo, Luis
  • Prieto López, Cristina
  • Lagarón Cabello, José María
Multilayer biopapers composed of two electrospun layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were impregnated, at the inner side of one of the layers, with cellulose nanocrystals (CNCs) and their composites with hydrocolloids, to develop high-barrier fully biobased structures. The study aimed for the first time at comparing the impregnation of electrospun fibers with several biopolymer solutions. Thus, neat CNCs, and CNCs mixed as a minor fraction, that is, 2 wt%, with gelatin (GE), agar (AG), xanthan gum (XG), and gum arabic (GA) were assessed in their potential to improve the barrier properties of PHBV. Glycerol plasticizer was added to the composite formulations. The impregnated electrospun multilayer mats were subsequently annealed, below the PHBV melting point, to yield continuous films by an interfiber coalescence process, so-called biopapers, and thereafter characterized to evaluate their potential for high barrier food packaging applications. The morphological characterization revealed good interlayer adhesion, more noticeably for those containing CNCs and their nanocomposites with AG and XG. From their mechanical response, it was inferred that the material behavior was governed mainly by the rigidity of the PHBV substrates, and this could not be significantly improved by impregnation with any of the various hydrocolloids. Whereas the water vapor barrier was not seen to improve in any of the samples, the barrier to the organic vapor limonene, used as a standard for aroma barrier, was however improved in the samples impregnated with AG and XG composites. Interestingly, the oxygen barrier properties were significantly improved but only by impregnation with pure CNCs. This study reports for the first time a scalable impregnation technology approach to produce fully biobased barrier multilayers., This research work was funded by the H2020 EU project USABLE PAKAGING (reference number 836884) and by the Spanish Ministry of Science and Innovation (MICI) project RTI2018-097249-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development and Characterization of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers Containing Cerium Oxide Nanoparticles for Active Food Packaging Applications

  • Figueroa-Lopez, Kelly J.
  • Prieto López, Cristina
  • Pardo Figuérez, María
  • Cabedo, Luis
  • Lagarón Cabello, José María
Food quality is mainly affected by oxygen through oxidative reactions and the proliferation of microorganisms, generating changes in its taste, odor, and color. The work presented here describes the generation and further characterization of films with active oxygen scavenging properties made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) loaded with cerium oxide nanoparticles (CeO2NPs) obtained by electrospinning coupled to a subsequent annealing process, which could be used as coating or interlayer in a multilayer concept for food packaging applications. The aim of this work is to explore the capacities of these novel biopolymeric composites in terms of O2 scavenging capacity, as well as antioxidant, antimicrobial, barrier, thermal, and mechanical properties. To obtain such biopapers, different ratios of CeO2NPs were incorporated into a PHBV solution with hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The produced films were analyzed in terms of antioxidant, thermal, antioxidant, antimicrobial, optical, morphological and barrier properties, and oxygen scavenging activity. According to the results, the nanofiller showed some reduction of the thermal stability of the biopolyester but exhibited antimicrobial and antioxidant properties. In terms of passive barrier properties, the CeO2NPs decreased the permeability to water vapor but increased the limonene and oxygen permeability of the biopolymer matrix slightly. Nevertheless, the oxygen scavenging activity of the nanocomposites showed significant results and improved further by incorporating the surfactant CTAB. The PHBV nanocomposite biopapers developed in this study appear as very interesting constituents for the potential design of new active organic recyclable packaging materials., Authors thank the funding received from the EU H2020 BBI JU USABLE PACKAGING project—836884 and also from the Spanish Ministry of Science and Innovation, project PID2021-128749OB-C31., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

  • Marcoaldi, Chiara
  • Pardo Figuérez, María
  • Prieto López, Cristina
  • Arnal, Carmen
  • Torres-Giner, Sergio
  • Cabedo, Luis
  • Lagarón Cabello, José María
In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies., This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-B-C1 and PID2021-128749OB-C31)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving the performance of biobased polyurethane dispersion by the incorporation of photo-crosslinkable coumarin

  • Germán-Ayuso, L.
  • Cuevas, J. M.
  • Seoane-Rivero, R.
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Vilas-Vilela, J. L.
High biobased carbon content polyurethane dispersions (PUD) are a more sustainable alternative to conventional oil-derived waterborne dispersions in coatings. However, there are still many performance limitations from restricted availability of effective renewable monomers and oligomers. This work demonstrates the improvement of the properties of high biobased content PUD and derived coating by introducing a photo-reversibly crosslinkable coumarin as chain extender within the structure. The effect of partial substitution of 1,3-propanediol biobased by a di-hydroxy photo-reactive cyclic coumarin on the particle size and the stability was analyzed by dynamic light scattering (DLS) and multiple light scattering (MLS). The lateral and more rigid structure of coumarin involved a moderated increment in particle size without significant effect on the dispersion stability for at least 45 days. Associated improvement in hardness and toughness was also demonstrated by tensile test, pendulum hardness, pencil hardness and scratch resistance test. Furthermore, controlled UV irradiation of the polyurethane gave rise to a mechanical performance adjustment from reversible photo-crosslinking and scission of the coumarin molecules within the macromolecular structure. A 70% dimerization degree of the coumarin within the polyurethane film by UV light provided a partially reversible threefold higher tensile strength than that of the original biobased formulation as an effective tool to tune the response of biobased polyurethanes. Graphical Abstract: [Figure not available: see fulltext.], This work was financially supported by the biobased Industries Undertaking (JU) under the European Union’s Horizon 2020 research and innovation programme under USABLE PACKGING project grant agreement No 836884. The JU receives support from the European Union’s Horizon 2020 research and innovation programme and the Bio Based Industries Consortium. The authors also gratefully acknowledge the financial support from the Basque Government (ELKARTEK programme, Research Project KK-2022/00109 – FRONTIERS 2022)., Peer reviewed