Skip to main content

ACUSTICA Y BIOMETRIA DEL ATUN ROJO (THUNNUS THYNNUS)  

CTM2015-70446-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrasonic monitoring of early larval development of fish in tanks. Case study: Gilthead seabream (Sparus aurata)

  • Ladino-Velásquez, Anderson
  • De la Gandara García, Fernando
  • Ortega, A.
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
[EN] Swimbladder inflation is a significant matter in intensive fish farming, since it is related to larval survival rate and the morphological quality of individuals. In this work, we propose a non-invasive acoustic technique using ultrasound to monitor the swimbladder development of gilthead seabream (Sparus aurata) in tanks. The fundamental hypothesis is that, due to the high acoustic contrast of gas, the swimbladder¿s inflation process can be detected by measuring the larvae¿s target strength during their early development. Backscatter numerical models using the finite element method, developed from biological measurement data, were applied to evaluate the feasibility of the proposed method. The acoustic measurements were obtained using an EK60 Simrad echosounder working at 200 kHz. The target strength values were evidenced with and without the presence of a developed swimbladder, showing a statistically significant relationship with the swimbladder¿s standard length, area and the percentage of larvae with a swimbladder. The experiments were carried out in the Spanish Institute of Oceanography (IEO)¿s marine aquaculture plant at Mazarrón (Murcia, Spain)., This work was supported by funding from Generalitat Valenciana (Regional Valencia Government) through the AICO/2020/064 project and the Spanish Government through ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU) , financing the experimental work carried out in the context of the competitive access ACUSTUNA in the ICTS-ICAR ( www.icar.ieo.es)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of fish backbone model geometrical features on the numerical target strength of swimbladdered fish

  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Godinho, L.
[EN] The method of fundamental solutions has been applied to evaluate the influence of fish models geometrical features on the target strength (TS) directivity and TS frequency response of swimbladdered fish. Simplified models were considered for two fish species: gilt-head sea bream (Sparus aurata, Linnaeus 1758) and Atlantic salmon (Salmo salar, Linnaeus 1758), and different geometrical details of their morphology were studied, such as backbone presence, and its curvature or the inclusion of vertebrae modulation. Swimbladder shape and tilt, together with the inclusion of backbone (and its realistic curvature) for dorsal measurements were the most important features for proper estimation of mean TS. The estimation of mean TS is considered including the effect of fish tilt, the echosounder frequency, and the fish-to-transducer distance., This work received funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU). LG acknowledges the support by FCT-Fundacao para a Ciencia e a Tecnologia, I.P., within the scope of the research unit "Institute for sustainability and innovation in structural engineering-ISISE" (UIDP/04029/2020) and of Regional Operational Programme CENTRO2020, within the scope of the project CENTRO-01-0145-FEDER000006 (SUSpENsE). IP-A and VE acknowledge the financial support of Generalitat Valenciana by grants BEST/2018/119 and BEST/2019/008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Bluefin Tuna (Thunnus thynnus) biomass estimation during transfers using acoustic and computer vision techniques

  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Valiente González, José Miguel|||0000-0003-4055-8976
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Estruch, V. D.
  • Ordoñez-Cebrian, Patricia
  • Mèlich, Begonya
  • De la Gandara García, Fernando
  • Santaella, E.
[EN] In this work, acoustic and computer vision techniques are combined to develop an automatic procedure for biomass estimation of tuna during transfers. A side scan sonar working at 200¿kHz and a stereo camera, positioned facing towards the surface to record the ventral aspect of fish, are set as acquisition equipment. Moreover, a floating structure has been devised to place the sensors between cages in transfers, creating a transfer canal that allows data acquisition while fish swim from donor to receiving cage. Biomass assessment is computed by counting transferred tuna and sizing a representative sample of the stock. The number of transferred tuna is automatically deduced from acoustic echograms by means of image processing techniques, whereas tuna size is computed from the stereo videos using our automatic computer vision procedure based on a deformable model of the fish ventral silhouette. The results show that the system achieves automatic tuna counting with error below 10%, achieving around 1% error in the best configuration, and automatic tuna sizing of more than 20% of the stock, with highly accurate Snout Fork Length estimation when compared to true data from harvests. These results fulfil the requirements imposed by International Commission for the Conservation of Atlantic Tunas for compliant transfer operations., This work was supported by funding from the BIACOP project, ES13/41, from the EU Fisheries Control Programme through the Secretaría General de Pesca, Ministerio de Agricultura, Alimentación y Medio Ambiente (MAGRAMA), and by ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU). The BIACOP project has been possible thanks to the collaboration of the Spanish company Grup Balfegó S.L. that also supplied boats and divers to acquire underwater video in the Mediterranean Sea. Special personal acknowledgements to Manuel Guijarro and Antonio López, and to David Baizán from IMA – Acuicultura Integrada Multitrófica S.L.U., for their assistance with the design and construction of the floating structures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimation of Bluefin Tuna (Thunnus thynnus) mean length in sea cages by acoustical means

  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Valiente González, José Miguel|||0000-0003-4055-8976
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Pastor Gimeno, José Ismael|||0000-0002-7184-4871
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Ladino-Velásquez, Anderson
  • Llorens-Escrich, Susana
  • Ordoñez-Cebrian, Patricia
[EN] This paper proposes an indirect method to estimate Bluefin Tuna (Thunnus thynnus) biomass in cages using acoustic techniques. Two Simrad EK60 echosounders working at 120 and 200 kHz and a stereo camera were used to obtain target strength (TS) to fork length (FL) relationships for both operating frequencies. The equipment was placed at the bottom of a floating cage, facing towards the surface to record the ventral aspect of fish. The acoustic and optical recordings were automatically analysed and the combination of acoustic and optical results provided unequivocal TS-FL assignments. Good relationships between TS and FL were obtained for both frequencies even without discriminating data from different fish tilts and without using beam directivity compensation. Stronger correlations were obtained for compensated TS at 200 kHz when reduced tuna swimming tilt was considered. TS measurements were compared to MFS numerical predictions for a Bluefin swimbladder model, with the simulation results showing good agreement with experimental measurements. The results allow the mean tuna length to be predicted in growing or fattening cages from acoustic data raising the possibility of improving production management and of providing a useful tool for catch control estimations made by international organisations (like ICCAT) and government bodies. (c) 2022 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., This work was supported by funding from the ACUSTUNA pro-ject ref. CTM2015-70446-R (MINECO/ERDF, EU). The authors are grateful for the support provided by Grup Balfego for their collab-oration and implication in installing and maintaining of the exper-imental setup in their tuna cages at l'Ametlla de Mar and for providing an ABFT specimen for x-ray imaging.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Bluefin Tuna Sizing with a Combined Acoustic and Optical Sensor

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
[EN] A proposal is described for an underwater sensor combining an acoustic device with an optical one to automatically size juvenile bluefin tuna from a ventral perspective. Acoustic and optical information is acquired when the tuna are swimming freely and the fish cross our combined sensor's field of view. Image processing techniques are used to identify and classify fish traces in acoustic data (echogram), while the video frames are processed by fitting a deformable model of the fishes' ventral silhouette. Finally, the fish are sized combining the processed acoustic and optical data, once the correspondence between the two kinds of data is verified. The proposed system is able to automatically give accurate measurements of the tuna's Snout-Fork Length (SFL) and width. In comparison with our previously validated automatic sizing procedure with stereoscopic vision, this proposal improves the samples per hour of computing time by 7.2 times in a tank with 77 juveniles of Atlantic bluefin tuna (Thunnus thynnus), without compromising the accuracy of the measurements. This work validates the procedure for combining acoustic and optical data for fish sizing and is the first step towards an embedded sensor, whose electronics and processing capabilities should be optimized to be autonomous in terms of the power supply and to enable real-time processing., This work was supported by funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU) and PAID-10-19 (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Bluefin Tuna sizing using a stereoscopic vision system

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Valiente González, José Miguel|||0000-0003-4055-8976
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] This article presents a non-invasive fully automatic procedure for Bluefin Tuna sizing, based on a stereoscopic vision system and a deformable model of the fish ventral silhouette. An image processing procedure is performed on each video frame to extract individual fish, followed by a fitting proce- dure to adjust the fish model to the extracted targets, adapting it to the bending movements of the fish. The proposed system is able to give accu- rate measurements of tuna snout fork length (SFL) and widths at five predefined silhouette points without manual intervention. In this work, the system is used to study size evolution in adult Atlantic Bluefin Tuna (Thunnus Thynnus) over time in a growing farm. The dataset is composed of 12 pairs of videos, which were acquired once a month in 2015, between July and October, in three grow-out cages of tuna aquaculture facilities on the west Mediterranean coast. Each grow out cage contains between 300 and 650 fish on an approximate volume of 20 000 m3.Measurements were au- tomatically obtained for the 4 consecutive months after caging and suggest a fattening process: SFL shows an increase of just a few centimetres (2%) while themaximum width (A1)shows arelative increaseofmorethan20%,mostlyinthe first 2months in farm. Moreover, a linear relation (with co- efficient of determination R2> 0.98) between SFL and widths for each month is deduced, and a fattening factor (F) is introduced. The validity of the measurements is proved by comparing 15 780 SFL measurements, obtained with our automatic system in the last month, versus ground truth data of a high percentage of the stock under study (1143 out of 1579), obtaining no statistically significant difference. This procedure could be extended to other species to assess the size distribution of stocks, as discussed in the article., This work was supported by funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU). This project has been possible thanks to the collaboration of IEO (Spanish Oceanographic Institute).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical simulation of target strength measurements from near to far field of fish using the method of fundamental solutions

  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Godinho, Luis
[EN] We propose the application of a numerical model based on the Method of Fundamental Solutions to the estimation of the target strength (TS) of single fish, a crucial parameter for evaluating fish abundance when using active acoustical techniques. We consider a realistic beam and the influence of the evolution of the scattered field with distance maintaining the target in the far field of the ultrasonic transducer. The cases of a fluid sphere and a prolate spheroid model for the swimbladder are used to verify the application of MFS against other analytical and numerical methods. Additionally, a model considering only the swimbladder and the fishbone is presented to evaluate the differences between dorsal and ventral aspect measurements, and to understand previous experimental works performed with Atlantic salmon (Salmo salar) in floating cages., I. Perez-Arjona and V. Espinosa acknowledge funding of ACUSTUNA project ref. CTM2015-70446-R (MINECO/FEDER, UE), and UPV grants of PAID-00-15 and GVA BEST/2015/270. L. Godinho acknowledges the funding by FEDER funds through the Competitivity Factors Operational Programme - COMPETE and by national funds through FCT - Foundation for Science and Technology within the scope of the project POCI-01-0145-FEDER-007633. The authors would like to thank Dr. Manuel Bou and Carlos Albino for the technical assistance with work-station procedures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relationship between weight and linear dimensions of Bluefin tuna (Thunnus thynnus) following fattening on western Mediterranean farms

  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Estruch, V. D.
  • De la Gandara Garcia, Fernando
  • Mèlich, Begonya
  • Cort, Jose Luis
[EN] This study presents various models based on formulae relating weight and dimensions (length, height and width) of Bluefin tuna, Thunnus thynnus (L.), fattened in captivity. The main aim of establishing these expressions is to design tools for indirectly predicting the weight of a Bluefin tuna from measurements of one or more dimensions obtained using non-invasive methods such as stereoscopic cameras. Measurements of maximum length, height and width following slaughter were taken of fish fattened in captivity (n = 2078). Different relationships drawn from the dimensions of the tuna against their weight are fitted with part of the data collection and later checked against a reserved sample set. The resulting formulae are compared with the formulae most commonly used in the case of wild tuna. The results of this study confirm that, for tuna fattened in cages, the availability of more than one dimension to estimate weight improves the predictive power of the model and reduces error in the estimate., This work was supported by funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU). The authors are grateful for the support provided by Grup Balfegó.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vision-based discrimination of tuna individuals in grow-out cages through a fish bending model

  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Valiente González, José Miguel|||0000-0003-4055-8976
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • López García, Fernando
This paper proposes a robust deformable adaptive 2D model, based on computer vision methods, that automatically fits the body (ventral silhouette) of Bluefin tuna while swimming. Our model (without human intervention) adjusts to fish shape and size, obtaining fish orientation, bending to fit their flexion motion and has proved robust enough to overcome possible segmentation inaccuracies. Once the model has been successfully fitted to the fish it can ensure that the detected object is a tuna and not parts of fish or other objects. Automatic requirements of the fishing industry like biometric measurement, specimen counting or catch biomass estimation could then be addressed using a stereoscopic system and meaningful information extracted from our model. We also introduce a fitting procedure based on a fitting parameter - Fitting Error Index (FEI) - which permits us to know the quality of the results. In the experiments our model has achieved very high success rates (up to 90%) discriminating individuals in highly complex images acquired for us in real conditions in the Mediterranean Sea. Conclusions and future improvements to the proposed model are also discussed., This work was partially supported by the EU Commission [2013/410/EU] (BIACOP project). We acknowledge funding of ACUSTUNA project ref. CTM2015-70446-R (MINECO/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced fish bending model for automatic tuna sizing using computer vision

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Valiente González, José Miguel|||0000-0003-4055-8976
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] This paper presents a non-invasive fully automatic procedure to obtain highly accurate fish length estimation in adult Bluefin Tuna, based on a stereoscopic vision system and a deformable model of the fish ventral silhouette. The present work takes a geometric tuna model, which was previously developed by the same authors to discriminate fish in 2D images, and proposes new models to enhance the capabilities of the automatic procedure, from fish discrimination to accurate 3D length estimation. Fish length information is an important indicator of the health of wild fish stocks and for predicting biomass using length-weight relations. The proposal pays special attention to parts of the fish silhouette that have special relevance for accurate length estimation. The models have been designed to best fit the rear part of the fish, in particular the caudal peduncle, and a width parameter has been added to better fit the silhouette. Moreover, algorithms have been developed to extract snout tip and caudal peduncle features, allowing better initialization of model parameters. Snout Fork Length (SFL) measurements using the different models are extracted from images recorded with a stereoscopic vision system in a sea cage containing 312 adult Atlantic Bluefin Tuna. The automatic measurements are compared with two ground truths: one configured with semiautomatic measurements of favourable selected samples and one with real SFL measurements of the tuna stock collected at harvesting. Comparison with the semiautomatic measurements demonstrates that the combination of improved geometric models and feature extraction algorithms delivers good results in terms of fish length estimation error (up to 90% of the samples bounded in a 3% error margin) and number of automatic measurements (up to 950 samples out of 1000). When compared with real SFL measurements of the tuna stock, the system provides a high number of automatic detections (up to 6706 in a video of 135¿min duration, i.e., 50 automatic measurements per minute of recording) and highly accurate length measurements, obtaining no statistically significant difference between automatic and real SFL frequency distributions. This procedure could be extended to other species to assess the size distribution of stocks, as discussed in the paper., This work was supported by funding from ACUSTUNA project ref. CTM2015-70446-R (MINECO/ERDF, EU). This project has been possible thanks to the collaboration of IEO (Spanish Oceanographic Institute). We acknowledge the assistance provided by the Spanish company Grup Balfego S.L. in supplying boats and divers to acquire underwater video in the Mediterranean Sea.