Skip to main content

-

JCI-2012-12664

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Contratación e Incorporación de RRHH
Subprogram Subprograma Juan de la Cierva (JDC)
Call Juan de la Cierva Incorporación
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring the surface chemistry of activated carbon cloth by electrochemical methods

  • Tabti, Zakaria
  • Ruiz-Rosas, Ramiro
  • Quijada Tomás, Cesar
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
This paper presents a systematic study of the effect of the electrochemical treatment (galvanostatic electrolysis in a filter-press electrochemical cell) on the surface chemistry and porous texture of commercial activated carbon cloth. The same treatments have been conducted over a granular activated carbon in order to clarify the effect of morphology. The influence of different electrochemical variables, such as the electrode polarity (anodic or cathodic), the applied current (between 0.2 and 1.0 A) and the type of electrolyte (HNO3 and NaCl) have also been analyzed. The anodic treatment of both activated carbons causes an increase in the amount of surface oxygen groups, whereas the cathodic treatment does not produce any relevant modification of the surface chemistry. The HNO3 electrolyte produced a lower generation of oxygen groups than the NaCl one, but differences in the achieved distribution of surface groups can be benefitial to selectively tune the surface chemistry. The porous texture seems to be unaltered after the electro-oxidation treatment. The validity of this method to introduce surface oxygen groups with a pseudocapacitive behavior has been corroborated by cyclic voltammetry. As a conclusion, the electrochemical treatment can be easily implemented to selectively and quantitatively modify the surface chemistry of activated carbons with different shapes and morphologies., The authors thank the MINECO and FEDER for financial support (MAT2010-15273 project). R.R.R. gratefully acknowledges funding from MINECO through "Juan de la Cierva" program (JCI-2012-12664)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced removal of 8-quinolinecarboxylic acid in an activated carbon cloth by electroadsorption in aqueous solution

  • López-Bernabeu, S.
  • Ruiz-Rosas, R.
  • Montilla, Francisco
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
The effect of the electrochemical treatment (potentiostatic treatment in a filter-press electrochemical cell) on the adsorption capacity of an activated carbon cloth (ACC) was analyzed in relation with the removal of 8-quinolinecarboxylic acid pollutant from water. The adsorption capacity of an ACC is quantitatively improved in the presence of an electric field (electroadsorption process) reaching values of 96% in comparison to 55% in absence of applied potential. In addition, the cathodic treatment results in higher removal efficiencies than the anodic treatment. The enhanced adsorption capacity has been proved to be irreversible, since the removed compound remains adsorbed after switching the applied potential. The kinetics of the adsorption processes is also improved by the presence of an applied potential. (C) 2015 Elsevier Ltd. All rights reserved., Grateful acknowledgement is made to Ministerio de Economia y Competitividad (MAT2013-42007-P, JCI-2012-12664) and Generalitat Valenciana (Prometeo/2013/038) for the financial support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Synthesis, Spectroscopic Characterization, Electrochemical Properties and Biological Activity of 1-[(4Hydroxyanilino)-methylidene] naphthalen-2(1H)-one and its Mn (III) Complex

  • Chahmana, Safia
  • Keraghel, Saida
  • Benghanem, Fatiha
  • Ruiz-Rosas, Ramiro
  • Ourari, Ali
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The bidentate (HL) Schiff base was synthesized by reacting 2-hydroxy-1-naphthaldehyde with 4-aminophenol in absolute ethanol. The resulting HL ligand was also coordinated with the manganese ions to obtain Mn(III) complex [Mn(III)L2ClPy (Py=pyridine)]. This Schiff base and its manganese(III) complex were characterized by multiple and usual methods including the 1H NMR, 13C NMR, elemental analysis (EA), FT-IR, UV-Vis, mass spectroscopy (MS), XRD, XPS and cyclic voltametry (CV). It was found that the ligand acts as a bidentate chelate. It coordinates with azomethine nitrogen and phenoxide oxygen. The other coordination sites, they are occupied by a chloride anion and a pyridine molecule completing the formation of Mn(III) Schiff base complex which is symbolized as Mn(III)L2ClPy. Conductance values measured indicate that these compounds do not possess an electrolytic character. The electrochemical behavior of the (HL) ligand and its manganese(III) complex have been investigated using a glassy carbon electrode in the presence of 0.1 M Bu4NClO4 solution as a supporting electrolyte in dimethylformamide (DMF) solution. The redox system of manganese(III) complex seems to be consistent with a quasi-reversible system involving a mono electronic transfer (MnIII/MnII). Both compounds, HL ligand and its Mn(III) complex were as well tested in biological activity. The obtained results indicate that they exhibit no antifungal activity but have moderate antibacterial activity towards the same organism studied. Also it is noted that this compounds have high DPPH radical-scavenging activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effects of the surface chemistry and structure of carbon nanotubes on the coating of glucose oxidase and electrochemical biosensors performance

  • González-Gaitán, Carolina
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Glucose oxidase (GOx) has been immobilized on multiwall and herringbone carbon nanotubes (NTs) for glucose biosensing. Emphasis has been pointed in the effect of the structure and surface chemistry in the biosensor performance. Functionalization with carboxylic moieties renders a better performance than amino groups, and it also improves the performance with respect to that of bare NTs. No relationship was found between sensitivity to glucose and the amount of charge coming from the direct electron transfer between NTs and the flavin adenine dinucleotide (FAD) group of GOx. Based on these results, oxidized herringbones and multiwall NTs were used to prepare electrochemical sensors with different GOx loadings that were tested at positive and negative potentials. At positive potentials, the sensing mechanism is based on the oxidation of H2O2, and differences in sensitivity are related to the amount of active enzyme loaded on the carbon nanotubes surface. This amount seems to be enhanced by the presence of carboxylic moieties on oxidized NTs, as well as by the homogeneous surface structure and higher surface area of multiwall NTs. In this sense, the homogeneous structure of multiwall NTs seems to be more important than their larger surface area. At negative potentials, the detection mechanism is driven by oxygen consumption during the glucose oxidation. Thanks to the aforementioned reasons, multiwall NTs provide a similar sensibility and working range as herringbone NTs while using half the amount of GOx. These results point out the huge impact of NTs structure and surface chemistry upon the activity of GOx for electrochemical sensors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modificación de la química superficial de los materiales carbonosos. Un aspecto clave para mejorar sus aplicaciones, Tailoring the surface chemistry of carbon materials. A key to improve their applications

  • González-Gaitán, Carolina
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
La modificación de la química superficial en los materiales carbonosos posibilita la adaptación de sus propiedades con objeto de mejorar su rendimiento en diferentes aplicaciones. En los últimos años se han desarrollado un gran número de técnicas de funcionalización covalente y no-covalente que permiten una modificación selectiva de la química superficial de los materiales carbonosos. Estas técnicas pueden ser catalogadas como métodos químicos o métodos electroquímicos, siendo los últimos más selectivos hacia un heteroátomo o grupo funcional determinado. En esta revisión se muestra una introducción a la química superficial en los materiales carbonosos así como una clasificación y una breve explicación de las técnicas comúnmente empleadas para su modificación.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhanced removal of 8-quinolinecarboxylic acid in an activated carbon cloth by electroadsorption in aqueous solution

  • López-Bernabeu, Sara
  • Ruiz-Rosas, Ramiro
  • Quijada Tomás, César
  • Montilla, Francisco
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The effect of the electrochemical treatment (potentiostatic treatment in a filter-press electrochemical cell) on the adsorption capacity of an activated carbon cloth (ACC) was analyzed in relation with the removal of 8-quinolinecarboxylic acid pollutant from water. The adsorption capacity of an ACC is quantitatively improved in the presence of an electric field (electroadsorption process) reaching values of 96% in comparison to 55% in absence of applied potential. In addition, the cathodic treatment results in higher removal efficiencies than the anodic treatment. The enhanced adsorption capacity has been proved to be irreversible, since the removed compound remains adsorbed after switching the applied potential. The kinetics of the adsorption processes is also improved by the presence of an applied potential.