Skip to main content

HACIA UNA INDUSTRIA ELECTRONICA BASADA EN CARBONO: FABRICACION DE DISPOSITIVOS ELECTRONICOS MOLECULARES USANDO PROCEDIMIENTOS QUIMICOS SENCILLOS

MAT2016-78257-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

All-carbon electrode molecular electronic devices based on Langmuir–Blodgett monolayers

  • Sangiao, S.
  • Martín, Santiago
  • González-Orive, Alejandro
  • Magén, César
  • Low, Paul J.
  • Teresa, José María de
  • Cea, Pilar
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes., This work was supported by the Ministerio de Ciencia e Innovación from Spain in the framework of grants CTQ2013-50187-EXP, MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2015-69725-REDT from MINECO (including FEDER funding) and CELINA COST Action CM1301. S.M and P.C. also acknowledge MINECO and FEDER funding for the MAT2016-78257-R grant. Financial support from DGA/Fondos Feder (Construyendo Europa desde Aragón) is also acknowledged by research group Platon (E-54) and Magna (E-26). P.J.L. holds an ARC Future Fellowship (Grant No. FT120100073) and gratefully acknowledges funding for this work from the ARC (Grant No. DP140100855)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A porphyrin spin qubit and Its 2D framework nanosheets

  • Urtizberea, Ainhoa
  • Natividad, Eva
  • Alonso, Pablo J.
  • Andrés, Miguel A.
  • Gascón, Ignacio
  • Goldmann, Michel
  • Gascón, Ignacio
Molecular spin qubits have been shown to reach sufficiently long quantum coherence times to envision their use as hardware in quantum processors. These will however require their implementation in hybrid solid‐state devices for which the controlled localization and homogeneous orientation of the molecular qubits will be necessary. An alternative to isolated molecules that can ensure these key aspects is 2D framework in which the qubit would act as node. In this work, it is demonstrated that the isolated metalloporphyrin [Cu(H4TCPP)] molecule is a potential spin qubit, and maintains similar quantum coherence as node in a 2D [{CuTCPP}Zn2(H2O)2] metal–organic framework. Mono‐ and multilayer deposits of nanosheets of a similar 2D framework are then successfully formed following a modular method based on Langmuir–Schaefer conditions. The orientation of the {CuTCPP} qubit nodes in these nanosheets is homogeneous parallel to the substrate. These nanosheets are also formed with a control over the qubit concentration, i.e., by dilution with the unmetallated porphyrin. Eventually, 2D nanosheets are formed in situ directly on a substrate, through a simple protocol devised to reproduce the Langmuir–Schaefer conditions locally. Altogether these studies show that 2D spin qubit frameworks are ideal components to develop a hybrid quantum computing architecture., The authors acknowledge funding from the Spanish MINECO through projects MAT2014-53961-R (O.R., E.N.), MAT2015-70868-ERC (O.R., A.U.), MAT2016-78257-R (I.G., M.A.A.), MAT2017-86826-R (O.R., E.N., A.U.), and CTQ2015-64486-R (P.J.A.), as well as from the Aragón government (DGA, consolidated group PLATON E31_17R). M.A.A. acknowledges the support of Spanish Ministerio de Educación for a FPU grant. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards molecular electronic devices based on ‘all-carbon’ wires

  • Moneo, Andrea
  • González-Orive, Alejandro
  • Bock, Sören
  • Fenero, Marta
  • Herrer, I. Lucía
  • Milan, David C.
  • Lorenzoni, Matteo
  • Nichols, Richard J.
  • Cea, Pilar
  • Perez Murano, Francesc X.
  • Low, Paul J.
  • Martín, Santiago
Nascent molecular electronic devices based on linear ‘all-carbon’ wires attached to gold electrodes through robust and reliable C–Au contacts are prepared via efficient in situ sequential cleavage of trimethylsilyl end groups from an oligoyne, Me3Si–(C[triple bond, length as m-dash]C)4–SiMe3 (1). In the first stage of the fabrication process, removal of one trimethylsilyl (TMS) group in the presence of a gold substrate, which ultimately serves as the bottom electrode, using a stoichiometric fluoride-driven process gives a highly-ordered monolayer, Au|C[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CSiMe3 (Au|C8SiMe3). In the second stage, treatment of Au|C8SiMe3 with excess fluoride results in removal of the remaining TMS protecting group to give a modified monolayer Au|C[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CH (Au|C8H). The reactive terminal C[triple bond, length as m-dash]C–H moiety in Au|C8H can be modified by ‘click’ reactions with (azidomethyl)ferrocene (N3CH2Fc) to introduce a redox probe, to give Au|C6C2N3HCH2Fc. Alternatively, incubation of the modified gold substrate supported monolayer Au|C8H in a solution of gold nanoparticles (GNPs), results in covalent attachment of GNPs on top of the film via a second alkynyl carbon–Au σ-bond, to give structures Au|C8|GNP in which the monolayer of linear, ‘all-carbon’ C8 chains is sandwiched between two macroscopic gold contacts. The covalent carbon–surface bond as well as the covalent attachment of the metal particles to the monolayer by cleavage of the alkyne C–H bond is confirmed by surface-enhanced Raman scattering (SERS). The integrity of the carbon chain in both Au|C6C2N3HCH2Fc systems and after formation of the gold top-contact electrode in Au|C8|GNP is demonstrated through electrochemical methods. The electrical properties of these nascent metal–monolayer–metal devices Au|C8|GNP featuring ‘all-carbon’ molecular wires were characterised by sigmoidal I–V curves, indicative of well-behaved junctions free of short circuits., P. C. is grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of the project MAT2016-78257-R. S. M. and P. C. also acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E-54). S. M. also thanks his JIUZ-2016-CIE-04 grant from University of Zaragoza. R. J. N. and D. C. M are grateful for financial assistance from the EPSRC (grant EP/M005046/1). P. J. L. and S. B. gratefully acknowledge support from the Australian Research Council (FT120100073; DP140100855)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unconventional single-molecule conductance behavior for a new heterocyclic anchoring group: Pyrazolyl

  • Herrer, I. Lucía
  • Ismael, Ali K.
  • Milan, David C.
  • Vezzoli, Andrea
  • Martín, Santiago
  • González-Orive, Alejandro
  • Grace, Iain
  • Lambert, Colin J.
  • Serrano, José Luis
  • Nichols, Richard J.
  • Cea, Pilar
Electrical conductance across a molecular junction is strongly determined by the anchoring group of the molecule. Here we highlight the unusual behavior of 1,4-bis(1H-pyrazol-4-ylethynyl)benzene that exhibits unconventional junction current versus junction-stretching distance curves, which are peak-shaped and feature two conducting states of 2.3 × 10-4 G0 and 3.4 × 10-4 G0. A combination of theory and experiments is used to understand the conductance of single-molecule junctions featuring this new anchoring group, i.e., pyrazolyl. These results demonstrate that the pyrazolyl moiety changes its protonation state and contact binding during junction evolution and that it also binds in either end-on or facial geometries with gold contacts. The pyrazolyl moiety holds general interest as a contacting group, because this linkage leads to a strong double anchoring of the molecule to the gold electrode, resulting in enhanced conductance values., P.C. and J.L.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R and CTQ2015-70174-P, respectively. J.L.S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the seventh Framework Programme (CEE, ref-607602). L.I.H., S.M., J.L.S, and P.C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. This work was additionally supported by the EPSRC “QuEEN” programme Grant EP/N017188/1. Further support from the UK EPSRC is acknowledged, through Grant Nos. EP/M014452/1, EP/P027156/1, and EP/N03337X/1. Support from the European Commission is provided by the FET Open project 767187 – QuIET and the Iraqi Ministry of Higher Education (SL-20). A.K.I. acknowledges financial support from Tikrit University (Iraq). D.C.M., A.V. and R.J.N. gratefully acknowledge funding by EPSRC through grants EP/M005046/1, EP/M014169/1, and EP/M029522/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High surface coverage of a self-assembled monolayer by in situ synthesis of palladium nanodeposits

  • Herrer, I. Lucía
  • Sebastián, Víctor
  • Martín, Santiago
  • González-Orive, Alejandro
  • Perez Murano, Francesc X.
  • Low, Paul J.
  • Serrano, José Luis
  • Ricote, J.
  • Cea, Pilar
Nascent metal|monolayer|metal devices have been fabricated by depositing palladium, produced through a CO-confined growth method, onto a self-assembled monolayer of an amine-terminated oligo(phenylene ethynylene) derivative on a gold bottom electrode. The high surface area coverage (85%) of the organic monolayer by densely packed palladium particles was confirmed by X-ray photoemission spectroscopy (XPS) and atomic force microscopy (AFM). The electrical properties of these nascent Au|monolayer|Pd assemblies were determined from the I-V curves recorded with a conductive-AFM using the Peak Force Tunneling AFM (PF-TUNA™) mode. The I-V curves together with the electrochemical experiments performed rule out the formation of short-circuits due to palladium penetration through the monolayer, suggesting that the palladium deposition strategy is an effective method for the fabrication of molecular junctions without damaging the organic layer., P. C. is grateful for financial assistance from Ministerio de Economía y Competitividad, Spain and fondos FEDER in the framework of project MAT2016-78257-R. S. M. and P. C. also acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E-54). V. S. acknowledges the support of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642) to develop this research. P. J. L. gratefully acknowledges support from the Australian Research Council (FT120100073; DP140100855). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of surface coverage on the formation of 4,4’-bipyridinium (viologen) single molecular junctions

  • Osorio, Henrry M.
  • Martín, Santiago
  • Milan, David C.
  • González-Orive, Alejandro
  • Gluyas, Josef B. G.
  • Higgins, Simon J.
  • Low, Paul J.
  • Cea, Pilar
Single-molecule conductance experiments using the STM-based I(s) method and samples of N,N’-di(4-(trimethylsilylethynyl)benzyl)-4,4’-bipyridinium bis(tetrafluoroborate) ([1](BF4)2) prepared on gold substrates with low-surface coverage of [1](BF4)2 (Γ = 1.25·10⁻¹¹ mol·cm⁻²) give rise to molecular junctions with two distinct conductance values. From the associated break-off distances and comparison experiments with related compounds the higher conductance junctions are attributed to molecular contacts between the molecule and the electrodes via the N,N’-dibenzyl-4,4´-bipyridinium (viologen) moiety and one trimethylsilylethynyl (TMSE) group (G = (5.4 ± 0.95)×10⁻⁵ G0, break-off distance (1.56 ± 0.09) nm). The second, lower conductance junction (G = (0.84 ± 0.09)×10⁻⁵ G0) is consistent with an extended molecular conformation between the substrate and tip contacted through the two TMSE groups giving rise to a break-off distance (1.95 ± 0.12) nm that compares well with the Si...Si distance (2.0 nm) in the extended molecule. Langmuir monolayers of [1](BF4)2 formed at the air-water interface can be transferred onto a gold-on-glass substrate by the Langmuir-Blodgett (LB) technique to give well-ordered, compact films with surface coverage Γ = 2.0·10⁻¹⁰ mol·cm⁻². Single-molecule conductance experiments using the STM-based I(s) method reveal only the higher conductance junctions (G = (5.4 ± 0.95)×10⁻⁵ G0, break-off distance (1.56 ± 0.09) nm) due to the restricted range of molecular conformations in the tightly packed, well-ordered LB films., S.M. and P.C. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R. S.M. and P.C. also acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E-54). S.M. acknowledges funding from the University of Zaragoza (grant number JIUZ02016-CIE-04). R.J.N, S.J.G and D.C.M are grateful for financial assistance from the EPSRC (grant EP/M029522/1). P.J.L. and J.B.G.G. gratefully acknowledge support from the Australian Research Council (FT120100073; DP140100855)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrically transmissive alkyne-anchored monolayers on gold

  • Herrer, I. Lucía
  • González-Orive, Alejandro
  • Marqués-González, Santiago
  • Martín, Santiago
  • Nichols, Richard J.
  • Serrano, José Luis
  • Low, Paul J.
  • Cea, Pilar
Well-ordered, tightly-packed (surface coverage 0.97 × 10−9 mol cm−2) monolayer films of 1,4-bis((4-ethynylphenyl)ethynyl)benzene (1) on gold are prepared via a simple self-assembly process, taking advantage of the ready formation of alkynyl C–Au σ-bonds. Electrochemical measurements using [Ru(NH3)6]3+, [Fe(CN)6]3−, and ferrocenylmethanol [Fe(η5-C5H4CH2OH)(η5-C5H5)] redox probes indicate that the alkynyl C–Au contacted monolayer of 1 presents a relatively low barrier for electron transfer. This contrasts with monolayer films on gold of other oligo(phenylene ethynylene) derivatives of comparable length and surface coverage, but with different contacting groups. Additionally, a low voltage transition (Vtrans = 0.51 V) from direct tunneling (rectangular barrier) to field emission (triangular barrier) is observed. This low transition voltage points to a low tunneling barrier, which is consistent with the facile electron transport observed through the C–Au contacted self-assembled monolayer of 1., P. C. and J. L. S. are grateful for financial assistance from Ministerio de Economia y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R and CTQ2015-70174-P, respectively. J. L. S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the 7th Framework Programme (CEE, Ref-607602). L. H., S. M., J. L. S, and P. C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. R. J. N. thanks EPSRC for funding (EP/M029522/1, EP/K007785/1, EP/M014169/1 and EP/M005046/1), and P. J. L. also gratefully acknowledges support from the Australian Research Council (FT120100073; DP140100855)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New routes to organometallic molecular junctions via a simple thermal processing protocol

  • Ezquerra, Rubén
  • Eaves, Samantha G.
  • Bock, Sören
  • Skelton, Brian W.
  • Perez Murano, Francesc X.
  • Cea, Pilar
  • Martín, Santiago
  • Low, Paul J.
Methods for forming single- and multiple-molecule junctions are key to the development of molecular electronics and the further study of allied electronic and electrical properties of molecules arising from through-molecule charge transport. The organometallic complex trans-Ru(C[triple bond, length as m-dash]C-3-C4H3S)(C[triple bond, length as m-dash]C-1,4-C6H4C[triple bond, length as m-dash]CAuPPh3)(dppe)2 forms well-ordered, densely packed self-assembled monolayers on gold and silver substrates, contacted through the sulfur atoms of the thiophenyl groups. Upon mild thermal treatment (150–200 °C, two hours) the gold moiety decomposes to liberate PPh3 and form quite uniform, disc-shaped gold nanoparticles on top of the organometallic monolayer. The resulting molecular junctions give rise to sigmoidal shaped I–V curves characteristic of through-molecule conductance, rather than linear, ohmic traces associated with metallic contacts (i.e. short circuits). This work therefore demonstrates the feasibility of thermal processing routes to form good quality molecular junctions from organometallic complexes of relatively complex molecular structure capped with uniformly-shaped nanoparticles formed in situ., P. C. is grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of project MAT2016-78257-R. S. M. and P. C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON research group (E31_17R). S. G. E. held a Durham Doctoral Scholarship, further supported by the University of Western Australia. S. B. held a scholarship for doctoral studies from the University of Western Australia International Research Training Scholarship Program. P. J. L. gratefully acknowledges support from the Australian Research Council (DP140100855)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single molecule vs. large area design of molecular electronic devices incorporating an efficient 2-aminepyridine double anchoring group

  • Herrer, I. Lucía
  • Ismael, Ali K.
  • Martín, Santiago
  • Milan, David C.
  • Serrano, José Luis
  • Nichols, Richard J.
  • Lambert, Colin J.
  • Cea, Pilar
When a molecule is bound to external electrodes by terminal anchor groups, the latter are of paramount importance in determining the electrical conductance of the resulting molecular junction. Here we explore the electrical properties of a molecule with bidentate anchor groups, namely 4,4′-(1,4-phenylenebis(ethyne-2,1-diyl))bis(pyridin-2-amine), in both large area devices and at the single molecule level. We find an electrical conductance of 0.6 × 10−4G0 and 1.2 × 10−4G0 for the monolayer and for the single molecule, respectively. These values are approximately one order of magnitude higher than those reported for monodentate materials having the same molecular skeleton. A combination of theory and experiments is employed to understand the conductance of monolayer and single molecule electrical junctions featuring this new multidentate anchor group. Our results demonstrate that the molecule has a tilt angle of 30° with respect to the normal to the surface in the monolayer, while the break-off length in the single molecule junction occurs for molecules having a tilt angle estimated as 40°, which would account for the difference in their conductance values per molecule. The bidentate 2-aminepyridine anchor is of general interest as a contact group, since this terminal functionalized aromatic ring favours binding of the adsorbate to the metal contact resulting in enhanced conductance values., P. C. and J. L. S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of projects MAT2016-78257-R, CTQ2015-70174-P and PGC2018-097583-B-I00. J. L. S. also acknowledges the funded project Hierarchical Self Assembly of Polymeric Soft Systems, “SASSYPOL”, from the 7th Framework Programme (CEE, Ref-607602). L. H., S. M., J. L. S, and P. C. acknowledge support from DGA/Fondos FEDER (construyendo Europa desde Aragón) for funding PLATON (E31_17R) and CLIP (E47_17R) research groups. R. J. N. thanks EPSRC for funding (EP/M029522/1, EP/M005046/1 and EP/K007785/1). A. K. I. and C. J. L. acknowledge financial support from the UK EPSRC, through grant no. EP/M014452/1, EP/P027156/1 and EP/N03337X/1. This work was additionally supported by the European Commission is provided by the FET Open project 767187 – QuIET and the EU project Bac-to-Fuel. A. K. I. is grateful for financial assistance from Tikrit University (Iraq), and the Iraqi Ministry of Higher Education (SL-20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

  • Andrés, Miguel A.
  • Sicard, Clemence
  • Serre, Christian
  • Roubeau, Olivier
  • Gascón, Ignacio
This work reports on the fabrication, optimization and characterization of ultrathin films containing submicrometer particles (sMPs) of the hydrophilic and water stable UiO-66-COOH(Zr) metal organic framework (MOF). MOF particles of ≈200 nm have been synthesized and assembled at the air–water interface by the Langmuir–Blodgett technique. The use of different solvents, mixtures of solvents and surfactants has been investigated in order to improve the stability of MOF dispersions and reduce particle aggregation. The compact MOF/surfactant films containing 10 wt % octadecylphoshonic acid (ODP) have been deposited on substrates of different nature by Langmuir–Blodgett (LB) and Langmuir–Schaefer (LS) methods, showing that the presence of even only one MOF/ODP monolayer can increase the water contact angle of highly hydrophilic substrates such as mica or glass up to 120°. These films were characterized by scanning electron microscopy, grazing incidence X-ray diffraction, Fourier transform infrared spectroscopy and atomic force microscopy, revealing the formation of a continuous film where ODP molecules adopt an almost vertical position and cover MOF particles. Moreover, the presence of MOF particles significantly enhances the surface roughness and allows ultrathin, hydrophobic coverage to be obtained. Finally, it has been shown that the crystallinity and the porosity of the MOF remains almost unaltered in MOF/ODP films., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement number 608490, project M4CO2, and also financial support from Spanish MINECO and FEDER (projects MAT2016-78257-R and MAT2017-86826-R), the Aragon Government (DGA) and the ESF (research groups E31_17R). Miguel A. Andrés wants to acknowledge the support of Ministerio de Educación from the Spanish Government under a FPU grant (Formación de Profesorado Universitario)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Methanol and humidity capacitive sensors based on thin films of MOF nanoparticles

  • Andrés, Miguel A.
  • Teja Vijjapu, Mani
  • Surya, Sandeep G.
  • Shekhah, Osama
  • Nabil Salama, Khaled
  • Serre, Christian
  • Eddaoudi, Mohamed
  • Roubeau, Olivier
  • Gascón, Ignacio
The successful development of modern gas sensing technologies requires high sensitivity and selectivity coupled to cost effectiveness, which implies the necessity to miniaturize devices while reducing the amount of sensing material. The appealing alternative of integrating nanoparticles of a porous metal–organic framework (MOF) onto capacitive sensors based on interdigitated electrode (IDE) chips is presented. We report the deposition of MIL-96(Al) MOF thin films via the Langmuir–Blodgett (LB) method on the IDE chips, which allowed the study of their gas/vapor sensing properties. First, sorption studies of several organic vapors like methanol, toluene, chloroform, etc. were conducted on bulk MOF. The sorption data revealed that MIL-96(Al) presents high affinity toward water and methanol. Later on, ordered LB monolayer films of MIL-96(Al) particles of ∼200 nm were successfully deposited onto IDE chips with homogeneous coverage of the surface in comparison to conventional thin film fabrication techniques such as drop-casting. The sensing tests showed that MOF LB films were selective for water and methanol, and short response/recovery times were achieved. Finally, chemical vapor deposition (CVD) of a porous thin film of Parylene C (thickness ∼250–300 nm) was performed on top of the MOF LB films to fabricate a thin selective layer. The sensing results showed an increase in the water selectivity and sensitivity, while those of methanol showed a huge decrease. These results prove the feasibility of the LB technique for the fabrication of ordered MOF thin films onto IDE chips using very small MOF quantities., The research leading to these results has received funding from Spanish MINECO and FEDER (projects MAT2016-78257-R and MAT2017-86826-R), the Aragon Government (DGA) and FEDER (research group E31_17R). M.A.A. acknowledges the support of Ministerio de Educación from the Spanish Government under an FPU grant (Formación de Profesorado Universitario, FPU14/05367), a short-term mobility FPU grant (EST18/00291), and of the King Abdullah University of Science and Technology and Advanced Membranes and Porous Materials Center under the Visiting Student Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards the design of effective multipodal contacts for use in the construction of Langmuir–Blodgett films and molecular junctions

  • Escorihuela, Enrique
  • Cea, Pilar
  • Bock, Sören
  • Milan, David C.
  • Naghibi, Saman
  • Osorio, Henrry M.
  • Nichols, Richard J.
  • Low, Paul J.
  • Martín, Santiago
As part of on-going efforts to optimize the electrical performance and stability of molecular electronic components, anchor groups that bind molecules to electrode surfaces via multiple points of connection (multipodal contacts) have begun to attract attention. Here an oligo(arylene)ethynylene (OAE) derivative with ‘tripodal’ 2,6-bis((methylthio)methyl)pyridine anchoring groups at both molecular termini has been prepared and used to form well-ordered monolayer Langmuir films at the air–water interface. These films were transferred onto solid supports (surface pressure of transference 8 mN m−1) to give homogeneous, densely packed, monolayer Langmuir–Blodgett (LB) films, which efficiently block a gold electrode surface. Within the surface-supported LB film, the molecules are oriented with a tilt angle of approximately 30° to the surface normal and contacted through both the ‘buttressed’ methylthioether groups and the pyridine nitrogen atom, as determined by X-ray photoelectron spectroscopy (XPS) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Molecular junctions formed by contact of a single molecule within the film by the “STM touch-to-contact” method give a most probable molecular conductance of 4.4 × 10−5G0. This value compares well with the single molecule conductance of 1,4-bis(pyridin-4-ylethynyl)benzene determined by a variety of methods (3.2–5.4 × 10−5G0), indicating that the addition of the buttressing groups does not perturb the favourable electrical characteristics of the pyridyl contacting group. Consistent with these conductance data, a transition voltage (Vtrans = 0.48 V) was observed for this ‘buttressed’, pyridine-contacted OAE derivative, indicating relatively good alignment of the metal electrode Fermi level and the frontier molecular orbitals., E. E. gratefully acknowledges the award of a DGA fellowship from Government of Aragon. P. C. is grateful for financial assistance from Ministerio de Economía y Competitividad from Spain and fondos FEDER in the framework of the project MAT2016-78257-R. S. M. and P. C. also acknowledge DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E31_17R). R. J. N. and D. C. M are grateful for financial assistance from the EPSRC (grants EP/M029522/1, EP/M005046/1 and EP/M014169/1). P. J. L. gratefully acknowledges support from the Australian Research Council (DP190100073 and DP190100074). S. B. thanks the University of Western Australia for the award of an International Postgraduate Research Scholarship. The authors also thank Dr G. Antorrena for technical support in XPS studies. H. M. O. is grateful for financial assistance from Escuela Politécnica Nacional in the framework of projects PII-DFIS-02-2018 and PIS-17-12., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vanadyl spin qubit 2D arrays and their integration on superconducting resonators

  • Urtizberea, Ainhoa
  • Natividad, Eva
  • Alonso, Pablo J.
  • Pérez-Martínez, Laura
  • Andrés, Miguel A.
  • Gascón, Ignacio
  • Gimeno, Ignacio
  • Luis, Fernando
  • Roubeau, Olivier
Vanadyl systems have been shown to possess superior quantum coherence among molecular spin qubits. Meanwhile two-dimensional (2D) networks of spin qubit nodes could provide a means to achieve the control of qubit localization and orientation required for implementation of molecular spin qubits in hybrid solid-state devices. Here, the 2D metal–organic framework [{VO(TCPP)}Zn2(H2O)2]∞ is reported and its vanadyl porphyrin node is shown to exhibit superior spin dynamics and to enable coherent spin manipulations, making it a valid spin qubit candidate. Nanodomains of the MOF 2D coordination planes are efficiently formed at the air–water interface, first under Langmuir–Schaefer conditions, allowing mono- and multiple layer deposits to be transferred to a variety of substrates. Similar nanodomains are then successfully formed in situ on the surface of Nb superconducting coplanar resonators. Transmission measurements with a resonator with a 14 μm-wide constriction allow to estimate that the single spin-photon coupling G1 of the vanadyl spins in the nanodomains is close to being optimal, at ca. 0.5 Hz. Altogether, these results provide the basis for developing a viable hybrid quantum computing architecture., The authors acknowledge funding from the Spanish MINECO through projects MAT2017-86826-R (O. R., E. N., A. U.), MAT2016-78257-R (I. G., M. A. A.), CTQ2015-64486-R (P. J. A.), PCI2018-093116 (F. L., I. G., O. R.) and RTI2018-096075-B-C21 (F. L., I. G.), as well as from the Aragón government (DGA, consolidated groups PLATON E31_17R and QMAD E09_17R) and the EU quantERA through project SUMO. M. A. A. acknowledges the support of Spanish Ministerio de Educación for FPU grant FPU14/05367., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin films of porous metal–organic polyhedra for gas separation

  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Sánchez-Laínez, Javier
  • Roubeau, Olivier
  • Coronas, Joaquín
  • Maspoch, Daniel
  • Gascón, Ignacio
Ultrathin films of a robust RhII‐based porous metal–organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air–water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP‐supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO2 permeance and CO2/N2 selectivity, demonstrating the great combined potential of MOP and Langmuir‐based techniques in separation technologies., This work was supported by the Spanish MINECO (projects RTI2018‐095622‐B‐I00, MAT2016‐78257‐R, MAT2016‐77290‐R and MAT2017‐86826‐R), the Catalan AGAUR (project 2017 SGR 328), the ERC under the EU‐FP7 (ERC‐Co 615954), the CERCA Program/Generalitat de Catalunya and the Aragon Government (T43_17R and E31_17R research groups). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV‐2017‐0706). A.C.‐S. thanks the Spanish MINECO for Juan de la Cierva fellowship (IJCI‐2016‐29802), J. S.‐L. and M.A.A thank the Spanish Education Ministry Program FPU2014 for their Ph.D. grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coating of conducting and insulating threads with porous MOF particles through langmuir-blodgett technique

  • Rauf, Sakandar
  • Andrés, Miguel A.
  • Roubeau, Olivier
  • Gascón, Ignacio
  • Serre, Christian
  • Eddaoudi, Mohamed
  • Salama, Khaled N.
This article belongs to the Special Issue Hybrid Porous Nanomaterials for Energy and Environment., The Langmuir-Blodgett (LB) method is a well-known deposition technique for the fabrication of ordered monolayer and multilayer thin films of nanomaterials onto different substrates that plays a critical role in the development of functional devices for various applications. This paper describes detailed studies about the best coating configuration for nanoparticles of a porous metal-organic framework (MOF) onto both insulating or conductive threads and nylon fiber. We design and fabricate customized polymethylmethacrylate sheets (PMMA) holders to deposit MOF layers onto the threads or fiber using the LB technique. Two different orientations, namely, horizontal and vertical, are used to deposit MIL-96(Al) monolayer films onto five different types of threads and nylon fiber. These studies show that LB film formation strongly depends on deposition orientation and the type of threads or fiber. Among all the samples tested, cotton thread and nylon fiber with vertical deposition show more homogenous monolayer coverage. In the case of conductive threads, the MOF particles tend to aggregate between the conductive thread’s fibers instead of forming a continuous monolayer coating. Our results show a significant contribution in terms of MOF monolayer deposition onto single fiber and threads that will contribute to the fabrication of single fiber or thread-based devices in the future., We acknowledge the financial support from King Abdullah University of Science and Technology (KAUST), Saudi Arabia. K.N. Salama would like to acknowledge the funding from AMPM center under the CCF grant. We thank the KAUST Sensor Initiative and KAUST visiting student program for supporting this work. Also, the research leading to these results has received funding from Spanish MINECO and FEDER (projects MAT2016-78257-R and MAT2017-86826-R), and the Aragón Government (DGA) and FEDER (research group E31_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

pH control of conductance in a pyrazolyl Langmuir–Blodgett monolayer

  • Herrer, Lucía
  • Martín, Santiago
  • González-Orive, Alejandro
  • Milan, David C.
  • Vezzoli, Andrea
  • Nichols, Richard J.
  • Serrano, José Luis
  • Cea, Pilar
In this contribution, pyrazole is identified as an excellent anchoring group capable of forming well-ordered Langmuir–Blodgett (LB) monolayers onto gold substrates. In contrast, the formation of self-assembled (SA) monolayers is prevented due to the extraction of gold atoms from the surface upon the incubation process required for the formation of these films. The electronic coupling strength of pyrazole–gold junctions is explored through evaluation of the electrical properties of LB films incorporating a double pyrazole terminated molecular wire, namely 1,4-bis(1H-pyrazol-4-ylethynyl)benzene, 1; these electrical properties are compared with those of molecules having a similar chemical structure, geometry and length. The conductance value for LB films of 1 is high when the monolayer is transferred from a Langmuir film prepared onto a basic subphase, 1.19 × 10−4G0, as it is more than four times larger than the conductance of the same compound incorporated on a LB film prepared from a water subphase, 0.27 × 10−4G0. These results are interpreted in terms of the deprotonation of the pyrazole group in a basic media that leads to the formation of the pyrazolate (deprotonated pyrazole) moiety. This results in a more efficient electronic coupling with the gold tip of the scanning tunnelling microscope used for film characterization., This project was supported by the Spanish Ministry of Science through the grant numbers MAT2016-78257-R and PID2019-105881RB-I00, including FEDER funding, by Gobierno de Aragón through the grant numbers LMP33-18, and E31_20R with European Social Fund (Construyendo Europa desde Aragón). A. V. acknowledges funding from the Royal Society (URF\R1\191241)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent-exchange process in MOF ultrathin films and its effect on CO2 and methanol adsorption

  • Andrés, Miguel A.
  • Fontaine, Philippe
  • Goldmann, Michel
  • Serre, Christian
  • Roubeau, Olivier
  • Gascón, Ignacio
Metal-organic framework (MOF) activation is crucial for the use of MOFs in several applications and solvent-exchange process is a necessary step in many activation methods. In this contribution, we have explored in situ MOF monolayer film formation at the air-water interface. Nanoparticles (NPs) of the Al trimesate MIL-96(Al) retain chloroform into their micropores, which considerably diminishes the CO2 adsorption capacity of MOF films. However, a solvent-exchange process between chloroform and water increases CO2 film adsorption capacity by 30%. Total Reflection X-Ray Fluorescence (TRXF) allows studying the kinetics of this process at the air-water interface, that strongly depends on the NP size. The conclusions derived from in situ studies allow optimizing the ex situ activation procedure of MIL-96(Al) films deposited onto quartz crystal microbalance (QCM) substrates in order to maximize CO2 and methanol adsorption., We acknowledge the financial support from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement number 608490, project M4CO2; and also financial support from Spanish MINECO and FEDER (projects MAT2016-78257-R and MAT2017-86826-R), from the Aragon Government (DGA) and FEDER (research group E31_17R) and from the University of Zaragoza (JIUZ-2015-CIE-02). M.A. Andrés acknowledges the support of Ministerio de Educación from the Spanish Government under a FPU grant (Formación de Profesorado Universitario, FPU14/05367)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of metallic and non-metallic top electrodes for large-area molecular junctions

  • Gorenskaia, Elena
  • Turner, Kelly L.
  • Martín, Santiago
  • Cea, Pilar
  • Low, Paul J.
Molecular junctions have proven invaluable tools through which to explore the electronic properties of molecules and molecular monolayers. In seeking to develop a viable molecular electronics based technology it becomes essential to be able to reliably create larger area molecular junctions by contacting molecular monolayers to both bottom and top electrodes. The assembly of monolayers onto a conducting substrate by self-assembly, Langmuir–Blodgett and other methods is well established. However, the deposition of top-contact electrodes without film penetration or damage from the growing electrode material has proven problematic. This Review highlights the challenges of this area, and presents a selective overview of methods that have been used to solve these issues., This project was supported by the Spanish Ministry of Science through the grant numbers MAT2016-78257-R and PID2019-105881RB-I00, including FEDER funding, by Gobierno de Aragón through the grant numbers LMP33-18, and E31_20R with European Social Fund (Construyendo Europa desde Aragón). Financial support from the Australian Research Council (DP190100073; DP190100074) and the University of Western Australia is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selective anchoring groups for molecular electronic junctions with ITO electrodes

  • Planje, Inco J.
  • Davidson, Ross J.
  • Vezzoli, Andrea
  • Daaoub, Abdalghani
  • Sangtarash, Sara
  • Sadeghi, Hatef
  • Martín, Santiago
  • Cea, Pilar
  • Lambert, Colin J.
  • Beeby, Andrew
  • Higgins, Simon J.
  • Nichols, Richard J.
Indium tin oxide (ITO) is an attractive substrate for single-molecule electronics since it is transparent while maintaining electrical conductivity. Although it has been used before as a contacting electrode in single-molecule electrical studies, these studies have been limited to the use of carboxylic acid terminal groups for binding molecular wires to the ITO substrates. There is thus the need to investigate other anchoring groups with potential for binding effectively to ITO. With this aim, we have investigated the single-molecule conductance of a series of eight tolane or “tolane-like” molecular wires with a variety of surface binding groups. We first used gold–molecule–gold junctions to identify promising targets for ITO selectivity. We then assessed the propensity and selectivity of carboxylic acid, cyanoacrylic acid, and pyridinium-squarate to bind to ITO and promote the formation of molecular heterojunctions. We found that pyridinium squarate zwitterions display excellent selectivity for binding to ITO over gold surfaces, with contact resistivity comparable to that of carboxylic acids. These single-molecule experiments are complemented by surface chemical characterization with X-ray photoelectron spectroscopy, quartz crystal microbalance, contact angle determination, and nanolithography using an atomic force miscroscope. Finally, we report the first density-functional theory calculations involving ITO electrodes to model charge transport through ITO–molecule–gold heterojunctions., This work was supported by EPSRC under Grants EP/M005046/1 (Single-Molecule Photo-Spintronics, Liverpool), EP/M029522/1 (Single Molecule Plasmoelectronics, Liverpool), EP/M029204/1 (Single Molecule Plasmoelectronics, Durham), EP/N017188/1, EP/M014452/1, EP/P027156/1, and EP/N03337X/1. Support from the European Commission is provided by the FET Open project 767187 – QuIET. A.V. acknowledges funding from the Royal Society (URF\R1\191241) and thanks Dr. Richard J. Brooke and Prof. Walther Schwarzacher for assistance in developing the Python script used for data processing. I.J.P. would like to thank Vivien Walter for his help with coding some of the data analysis procedures. S.S. thanks the Leverhulme Trust for funding (Early Career Fellowship ECF-2018-375). H.S. thanks UKRI for funding (Future Leaders Fellowship MR/S015329/2). S.M. and P.C. acknowledge financial assistance from Ministerio de Ciencia e Innovación from Spain and fondos FEDER in the framework of projects MAT2016-78257-R and PID2019-105881RB-I00 and support from Gobierno de Aragón through the grant numbers LMP33-18 and E31_20R with European Social Fund (Construyendo Europa desde Aragón)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of ultrathin MIL-96(Al) films and study of CO2 adsorption/desorption processes using quartz crystal microbalance

  • Andrés, Miguel A.
  • Benzaqui, Marvin
  • Serre, Christian
  • Steunou, Nathalie
  • Gascón, Ignacio
This contribution reports the fabrication and characterization of ultrathin films of nanoparticles of the water stable microporous Al tricarboxylate metal organic framework MIL-96(Al). The preparation of MOF dispersions in chloroform has been optimized to obtain dense monolayer films of good quality, without nanoparticle agglomeration, at the air-water interface that can be deposited onto solid substrates of different nature without any previous substrate functionalization. The MOF studied shows great interest for CO2 capture because it presents Al3+ Lewis centers and hydroxyl groups that strongly interact with CO2 molecules. A comparative CO2 adsorption study on drop-cast, Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) films using a Quartz Crystal Microbalance-based setup (QCM) has revealed that the CO2 uptake depends strongly on the film fabrication procedure and the storage conditions. Noteworthy the CO2 adsorption capacity of LB films is increased by 30% using a simple and green treatment (immersion of the film into water during 12 h just after film preparation). Finally, the stability of LB MOF monolayers upon several CO2 adsorption/desorption cycles has been demonstrated, showing that CO2 can be easily desorbed from the films at 303 K by flowing an inert gas (He). These results show that MOF LB monolayers can be of great interest for the development of MOF-based devices that require the use of very small MOF quantities, especially gas sensors., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement number 608490, project M4CO2; and also financial support from Spanish MINECO and FEDER (project MAT2016-78257-R), from the Universidad de Zaragoza (Project JIUZ-2015-CIE-02), the Aragon Government (DGA) and the ESF (research group E54). Miguel A. Andrés wants to acknowledge the support of Ministerio de Educación from the Spanish Government under a FPU grant (Formación de Profesorado Universitario). The authors acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) and the Laboratorio de Microscopías Avanzadas (LMA) at the Instituto de Nanociencia de Aragón (INA, Universidad de Zaragoza), LMA-INA, for offering access to their instruments and expertise., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

All-Carbon Electrode Molecular Electronic Devices Based on Langmuir–Blodgett Monolayers

  • Sangiao, S.
  • Martín, S.
  • González-Orive, A.
  • Magén, C.
  • Low, P.J.
  • De Teresa, J.M.
  • Cea, P.
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unconventional Single-Molecule Conductance Behavior for a New Heterocyclic Anchoring Group: Pyrazolyl

  • Herrer, I.L.
  • Ismael, A.K.
  • Milán, D.C.
  • Vezzoli, A.
  • Martín, S.
  • González-Orive, A.
  • Grace, I.
  • Lambert, C.
  • Serrano, J.L.
  • Nichols, R.J.
  • Cea, P.
Electrical conductance across a molecular junction is strongly determined by the anchoring group of the molecule. Here we highlight the unusual behaviour of 1,4-bis(1H-pyrazol-4- ylethynyl)benzene that exhibits unconventional junction current vs. junction stretching distance curves, which are peak-shaped and feature two conducting states of 2.3·10-4 G0 and 3.4·10-4 G0. A combination of theory and experiments is used to understand the conductance of single molecule junctions featuring this new anchoring group, i.e. pyrazolyl. These results demonstrate that the pyrazolyl moiety changes its protonation state and contact binding during junction evolution and it also binds in either end-on or facial geometries with gold contacts. Pyrazolyl moiety holds general interest as a contacting group, since this linkage leads to a strong double anchoring of the molecule to the gold electrode resulting in enhanced conductance values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fabrication of ultrathin MIL-96(Al) films and study of CO2 adsorption/desorption processes using quartz crystal microbalance

  • Andrés, M.A.
  • Benzaqui, M.
  • Serre, C.
  • Steunou, N.
  • Gascón, I.
This contribution reports the fabrication and characterization of ultrathin films of nanoparticles of the water stable microporous Al tricarboxylate metal organic framework MIL-96(Al). The preparation of MOF dispersions in chloroform has been optimized to obtain dense monolayer films of good quality, without nanoparticle agglomeration, at the air-water interface that can be deposited onto solid substrates of different nature without any previous substrate functionalization. The MOF studied shows great interest for CO2 capture because it presents Al3+ Lewis centers and hydroxyl groups that strongly interact with CO2 molecules. A comparative CO2 adsorption study on drop-cast, Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) films using a Quartz Crystal Microbalance-based setup (QCM) has revealed that the CO2 uptake depends strongly on the film fabrication procedure and the storage conditions. Noteworthy the CO2 adsorption capacity of LB films is increased by 30% using a simple and green treatment (immersion of the film into water during 12 h just after film preparation). Finally, the stability of LB MOF monolayers upon several CO2 adsorption/desorption cycles has been demonstrated, showing that CO2 can be easily desorbed from the films at 303 K by flowing an inert gas (He). These results show that MOF LB monolayers can be of great interest for the development of MOF-based devices that require the use of very small MOF quantities, especially gas sensors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

  • Andres, Miguel A.
  • Sicard, Clemence
  • Serre, Christian
  • Roubeau, Olivier
  • Gascon, Ignacio
This work reports on the fabrication, optimization and characterization of ultrathin films containing submicrometer particles (sMPs) of the hydrophilic and water stable UiO-66-COOH(Zr) metal organic framework (MOF). MOF particles of approximate to 200 nm have been synthesized and assembled at the air-water interface by the Langmuir-Blodgett technique. The use of different solvents, mixtures of solvents and surfactants has been investigated in order to improve the stability of MOF dispersions and reduce particle aggregation. The compact MOF/surfactant films containing 10 wt % octadecylphoshonic acid (ODP) have been deposited on substrates of different nature by Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) methods, showing that the presence of even only one MOF/ODP monolayer can increase the water contact angle of highly hydrophilic substrates such as mica or glass up to 120 degrees. These films were characterized by scanning electron microscopy, grazing incidence X-ray diffraction, Fourier transform infrared spectroscopy and atomic force microscopy, revealing the formation of a continuous film where ODP molecules adopt an almost vertical position and cover MOF particles. Moreover, the presence of MOF particles significantly enhances the surface roughness and allows ultrathin, hydrophobic coverage to be obtained. Finally, it has been shown that the crystallinity and the porosity of the MOF remains almost unaltered in MOF/ODP films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards molecular electronic devices based on 'all-carbon' wires

  • Moneo, Andrea
  • González-Orive, Alejandro
  • Bock, Soren
  • Fenero, Marta
  • Herrer, I. Lucía
  • Milan, David C.
  • Lorenzoni, Matteo
  • Nichols, Richard J.
  • Cea, Pilar
  • Perez-Murano, Francesc
  • Low, Paul J.
  • Martin, Santiago
Nascent molecular electronic devices based on linear ‘all-carbon’ wires attached to gold electrodes through robust and reliable C–Au contacts are prepared via efficient in situ sequential cleavage of trimethylsilyl end groups from an oligoyne, Me3Si–(C[triple bond, length as m-dash]C)4–SiMe3 (1). In the first stage of the fabrication process, removal of one trimethylsilyl (TMS) group in the presence of a gold substrate, which ultimately serves as the bottom electrode, using a stoichiometric fluoride-driven process gives a highly-ordered monolayer, Au|C[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CSiMe3 (Au|C8SiMe3). In the second stage, treatment of Au|C8SiMe3 with excess fluoride results in removal of the remaining TMS protecting group to give a modified monolayer Au|C[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CC[triple bond, length as m-dash]CH (Au|C8H). The reactive terminal C[triple bond, length as m-dash]C–H moiety in Au|C8H can be modified by ‘click’ reactions with (azidomethyl)ferrocene (N3CH2Fc) to introduce a redox probe, to give Au|C6C2N3HCH2Fc. Alternatively, incubation of the modified gold substrate supported monolayer Au|C8H in a solution of gold nanoparticles (GNPs), results in covalent attachment of GNPs on top of the film via a second alkynyl carbon–Au σ-bond, to give structures Au|C8|GNP in which the monolayer of linear, ‘all-carbon’ C8 chains is sandwiched between two macroscopic gold contacts. The covalent carbon–surface bond as well as the covalent attachment of the metal particles to the monolayer by cleavage of the alkyne C–H bond is confirmed by surface-enhanced Raman scattering (SERS). The integrity of the carbon chain in both Au|C6C2N3HCH2Fc systems and after formation of the gold top-contact electrode in Au|C8|GNP is demonstrated through electrochemical methods. The electrical properties of these nascent metal–monolayer–metal devices Au|C8|GNP featuring ‘all-carbon’ molecular wires were characterised by sigmoidal I–V curves, indicative of well-behaved junctions free of short circuits.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Nanofabrication techniques in large-area molecular electronic devices

  • Herrer, L.
  • Martín, S.
  • Cea, P.
The societal impact of the electronics industry is enormous-not to mention how this industry impinges on the global economy. The foreseen limits of the current technology-technical, economic, and sustainability issues-open the door to the search for successor technologies. In this context, molecular electronics has emerged as a promising candidate that, at least in the short-term, will not likely replace our silicon-based electronics, but improve its performance through a nascent hybrid technology. Such technology will take advantage of both the small dimensions of the molecules and new functionalities resulting from the quantum effects that govern the properties at the molecular scale. An optimization of interface engineering and integration of molecules to form densely integrated individually addressable arrays of molecules are two crucial aspects in the molecular electronics field. These challenges should be met to establish the bridge between organic functional materials and hard electronics required for the incorporation of such hybrid technology in the market. In this review, the most advanced methods for fabricating large-area molecular electronic devices are presented, highlighting their advantages and limitations. Special emphasis is focused on bottom-up methodologies for the fabrication of well-ordered and tightly-packed monolayers onto the bottom electrode, followed by a description of the top-contact deposition methods so far used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of pt-c deposits by cryo-fibid: Substantial growth rate increase and quasi-metallic behaviour

  • Salvador-Porroche, A.
  • Sangiao, S.
  • Philipp, P.
  • Cea, P.
  • De Teresa, J.M.
The Focused Ion Beam Induced Deposition (FIBID) under cryogenic conditions (Cryo-FIBID) technique is based on obtaining a condensed layer of precursor molecules by cooling the substrate below the condensation temperature of the gaseous precursor material. This condensed layer is irradiated with ions according to a desired pattern and, subsequently, the substrate is heated above the precursor condensation temperature, revealing the deposits with the shape of the exposed pattern. In this contribution, the fast growth of Pt-C deposits by Cryo-FIBID is demonstrated. Here, we optimize various parameters of the process in order to obtain deposits with the lowest-possible electrical resistivity. Optimized ~30 nm-thick Pt-C deposits are obtained using ion irradiation area dose of 120 µC/cm2 at 30 kV. This finding represents a substantial increment in the growth rate when it is compared with deposits of the same thickness fabricated by standard FIBID at room temperature (40 times enhancement). The value of the electrical resistivity in optimized deposits (~4 × 104 µO cm) is suitable to perform electrical contacts to certain materials. As a proof of concept of the potential applications of this technology, a 100 µm × 100 µm pattern is carried out in only 43 s of ion exposure (area dose of 23 µC/cm2), to be compared with 2.5 h if grown by standard FIBID at room temperature. The ion trajectories and the deposit composition have been simulated using a binary-collision-approximation Monte Carlo code, providing a solid basis for the understanding of the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrathin Films of Porous Metal–Organic Polyhedra for Gas Separation

  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Sánchez-Laínez, Javier
  • Roubeau, Olivier
  • Coronas, Joaquín
  • Maspoch, Daniel
  • Gascón, Ignacio
Ultrathin films of a robust RhII-based porous metal–organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air–water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP-supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO2 permeance and CO2/N2 selectivity, demonstrating the great combined potential of MOP and Langmuir-based techniques in separation technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vanadyl spin qubit 2D arrays and their integration on superconducting resonators

  • Urtizberea, Ainhoa
  • Natividad, Eva
  • Alonso, Pablo J.
  • Pérez-Martínez, Laura
  • Andrés, Miguel A.
  • Gascón, Ignacio
  • Gimeno, Ignacio
  • Luis, Fernando
  • Roubeau, Olivier
Vanadyl systems have been shown to possess superior quantum coherence among molecular spin qubits. Meanwhile two-dimensional (2D) networks of spin qubit nodes could provide a means to achieve the control of qubit localization and orientation required for implementation of molecular spin qubits in hybrid solid-state devices. Here, the 2D metal-organic framework [{VO(TCPP)}Zn2(H2O)2]8 is reported and its vanadyl porphyrin node is shown to exhibit superior spin dynamics and to enable coherent spin manipulations, making it a valid spin qubit candidate. Nanodomains of the MOF 2D coordination planes are efficiently formed at the air-water interface, first under Langmuir-Schaefer conditions, allowing mono- and multiple layer deposits to be transferred to a variety of substrates. Similar nanodomains are then successfully formed in situ on the surface of Nb superconducting coplanar resonators. Transmission measurements with a resonator with a 14 µm-wide constriction allow to estimate that the single spin-photon coupling G1 of the vanadyl spins in the nanodomains is close to being optimal, at ca. 0.5 Hz. Altogether, these results provide the basis for developing a viable hybrid quantum computing architecture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Coating of conducting and insulating threads with porous mof particles through langmuir-blodgett technique

  • Rauf, S.
  • Andrés, M.A.
  • Roubeau, O.
  • Gascón, I.
  • Serre, C.
  • Eddaoudi, M.
  • Salama, K.N.
The Langmuir-Blodgett (LB) method is a well-known deposition technique for the fabrication of ordered monolayer and multilayer thin films of nanomaterials onto different substrates that plays a critical role in the development of functional devices for various applications. This paper describes detailed studies about the best coating configuration for nanoparticles of a porous metal-organic framework (MOF) onto both insulating or conductive threads and nylon fiber. We design and fabricate customized polymethylmethacrylate sheets (PMMA) holders to deposit MOF layers onto the threads or fiber using the LB technique. Two different orientations, namely, horizontal and vertical, are used to deposit MIL-96(Al) monolayer films onto five different types of threads and nylon fiber. These studies show that LB film formation strongly depends on deposition orientation and the type of threads or fiber. Among all the samples tested, cotton thread and nylon fiber with vertical deposition show more homogenous monolayer coverage. In the case of conductive threads, the MOF particles tend to aggregate between the conductive thread’s fibers instead of forming a continuous monolayer coating. Our results show a significant contribution in terms of MOF monolayer deposition onto single fiber and threads that will contribute to the fabrication of single fiber or thread-based devices in the future.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Methanol and Humidity Capacitive Sensors Based on Thin Films of MOF Nanoparticles

  • Andres, Miguel A.
  • Vijjapu, Mani Teja
  • Surya, Sandeep G.
  • Shekhah, Osama
  • Salama, Khaled Nabil
  • Serre, Christian
  • Eddaoudi, Mohamed
  • Roubeau, Olivier
  • Gascon, Ignacio
The successful development of modern gas sensing technologies requires high sensitivity and selectivity coupled to cost effectiveness, which implies the necessity to miniaturize devices while reducing the amount of sensing material. The appealing alternative of integrating nanoparticles of a porous metal-organic framework (MOF) onto capacitive sensors based on interdigitated electrode (IDE) chips is presented. We report the deposition of MIL-96(Al) MOF thin films via the Langmuir-Blodgett (LB) method on the IDE chips, which allowed the study of their gas/vapor sensing properties. First, sorption studies of several organic vapors like methanol, toluene, chloroform, etc. were conducted on bulk MOF. The sorption data revealed that MIL-96(AI) presents high affinity toward water and methanol. Later on, ordered LB monolayer films of MIL-96(Al) particles of similar to 200 nm were successfully deposited onto IDE chips with homogeneous coverage of the surface in comparison to conventional thin film fabrication techniques such as drop-casting. The sensing tests showed that MOF LB films were selective for water and methanol, and short response/recovery times were achieved. Finally, chemical vapor deposition (CVD) of a porous thin film of Parylene C (thickness, similar to 250-300 nm) was performed on top of the MOF LB films to fabricate a thin selective layer. The sensing results showed an increase in the water selectivity and sensitivity, while those of methanol showed a huge decrease. These results prove the feasibility of the LB technique for the fabrication of ordered MOF thin films onto IDE chips using very small MOF quantities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Solvent-exchange process in MOF ultrathin films and its effect on CO2 and methanol adsorption

  • Andrés, M.A.
  • Fontaine, P.
  • Goldmann, M.
  • Serre, C.
  • Roubeau, O.
  • Gascón, I.
Metal-organic framework (MOF) activation is crucial for the use of MOFs in several applications and solvent-exchange process is a necessary step in many activation methods. In this contribution, we have explored in situ MOF monolayer film formation at the air-water interface. Nanoparticles (NPs) of the Al trimesate MIL-96(Al) retain chloroform into their micropores, which considerably diminishes the CO2 adsorption capacity of MOF films. However, a solvent-exchange process between chloroform and water increases CO2 film adsorption capacity by 30%. Total Reflection X-Ray Fluorescence (TRXF) allows studying the kinetics of this process at the air-water interface, that strongly depends on the NP size. The conclusions derived from in situ studies allow optimizing the ex situ activation procedure of MIL-96(Al) films deposited onto quartz crystal microbalance (QCM) substrates in order to maximize CO2 and methanol adsorption.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Porphyrin Spin Qubit and Its 2D Framework Nanosheets

  • Urtizberea, A.
  • Natividad, E.
  • Alonso, P.J.
  • Andrés, M.A.
  • Gascón, I.
  • Goldmann, M.
  • Roubeau, O.
Molecular spin qubits have been shown to reach sufficiently long quantum coherence times to envision their use as hardware in quantum processors. These will however require their implementation in hybrid solid-state devices for which the controlled localization and homogeneous orientation of the molecular qubits will be necessary. An alternative to isolated molecules that can ensure these key aspects is 2D framework in which the qubit would act as node. In this work, it is demonstrated that the isolated metalloporphyrin [Cu(H4TCPP)] molecule is a potential spin qubit, and maintains similar quantum coherence as node in a 2D [{CuTCPP}Zn2(H2O)2] metal–organic framework. Mono- and multilayer deposits of nanosheets of a similar 2D framework are then successfully formed following a modular method based on Langmuir–Schaefer conditions. The orientation of the {CuTCPP} qubit nodes in these nanosheets is homogeneous parallel to the substrate. These nanosheets are also formed with a control over the qubit concentration, i.e., by dilution with the unmetallated porphyrin. Eventually, 2D nanosheets are formed in situ directly on a substrate, through a simple protocol devised to reproduce the Langmuir–Schaefer conditions locally. Altogether these studies show that 2D spin qubit frameworks are ideal components to develop a hybrid quantum computing architecture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrically transmissive alkyne-anchored monolayers on gold

  • Herrer, L
  • Gonzalez-Orive, A
  • Marques-Gonzalez, S
  • Martin, S
  • Nichols, R.J
  • Serrano, J.L
  • Low, P.J
  • Cea, P.
Well-ordered, tightly-packed (surface coverage 0.97 x 10(-9) mol cm(-2)) monolayer films of 1, 4-bis((4-ethynylphenyl)ethynyl)benzene (1) on gold are prepared via a simple self-assembly process, taking advantage of the ready formation of alkynyl C-Au sigma-bonds. Electrochemical measurements using [Ru(NH3)(6)](3+), [Fe(CN)(6)](3-), and ferrocenylmethanol [Fe((5)-C5H4CH2OH)((5)-C5H5)] redox probes indicate that the alkynyl C-Au contacted monolayer of 1 presents a relatively low barrier for electron transfer. This contrasts with monolayer films on gold of other oligo(phenylene ethynylene) derivatives of comparable length and surface coverage, but with different contacting groups. Additionally, a low voltage transition (V-trans = 0.51 V) from direct tunneling (rectangular barrier) to field emission (triangular barrier) is observed. This low transition voltage points to a low tunneling barrier, which is consistent with the facile electron transport observed through the C-Au contacted self-assembled monolayer of 1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single molecule vs. large area design of molecular electronic devices incorporating an efficient 2-aminepyridine double anchoring group

  • Herrer, L.
  • Ismae, l A.
  • Martín, S.
  • Milan, D.C.
  • Serrano, J.L.
  • Nichols, R.J.
  • Lambert, C.
  • Cea, P.
When a molecule is bound to external electrodes by terminal anchor groups, the latter are of paramount importance in determining the electrical conductance of the resulting molecular junction. Here we explore the electrical properties of a molecule with bidentate anchor groups, namely 4, 4'-(1, 4-phenylenebis(ethyne-2, 1-diyl))bis(pyridin-2-amine), in both large area devices and at the single molecule level. We find an electrical conductance of 0.6 × 10-4G0 and 1.2 × 10-4G0 for the monolayer and for the single molecule, respectively. These values are approximately one order of magnitude higher than those reported for monodentate materials having the same molecular skeleton. A combination of theory and experiments is employed to understand the conductance of monolayer and single molecule electrical junctions featuring this new multidentate anchor group. Our results demonstrate that the molecule has a tilt angle of 30° with respect to the normal to the surface in the monolayer, while the break-off length in the single molecule junction occurs for molecules having a tilt angle estimated as 40°, which would account for the difference in their conductance values per molecule. The bidentate 2-aminepyridine anchor is of general interest as a contact group, since this terminal functionalized aromatic ring favours binding of the adsorbate to the metal contact resulting in enhanced conductance values. © 2019 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

pH control of conductance in a pyrazolyl Langmuir-Blodgett monolayer

  • Herrer, L.
  • Martín, S.
  • González-Orive, A.
  • Milan, D.C.
  • Vezzoli, A.
  • Nichols, R.J.
  • Serrano, J.L.
  • Cea, P.
In this contribution, pyrazole is identified as an excellent anchoring group capable of forming well-ordered Langmuir-Blodgett (LB) monolayers onto gold substrates. In contrast, the formation of self-assembled (SA) monolayers is prevented due to the extraction of gold atoms from the surface upon the incubation process required for the formation of these films. The electronic coupling strength of pyrazole-gold junctions is explored through evaluation of the electrical properties of LB films incorporating a double pyrazole terminated molecular wire, namely 1, 4-bis(1H-pyrazol-4-ylethynyl)benzene, 1; these electrical properties are compared with those of molecules having a similar chemical structure, geometry and length. The conductance value for LB films of1is high when the monolayer is transferred from a Langmuir film prepared onto a basic subphase, 1.19 × 10-4G0, as it is more than four times larger than the conductance of the same compound incorporated on a LB film prepared from a water subphase, 0.27 × 10-4G0. These results are interpreted in terms of the deprotonation of the pyrazole group in a basic media that leads to the formation of the pyrazolate (deprotonated pyrazole) moiety. This results in a more efficient electronic coupling with the gold tip of the scanning tunnelling microscope used for film characterization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards the design of effective multipodal contacts for use in the construction of Langmuir-Blodgett films and molecular junctions

  • Escorihuela, Enrique
  • Cea, Pilar
  • Bock, Sören
  • Milan, David C.
  • Naghibi, Saman
  • Osorio, Henry M.
  • Nichols, Richard J.
  • Low, Paul J.
  • Martín, Santiago
As part of on-going efforts to optimize the electrical performance and stability of molecular electronic components, anchor groups that bind molecules to electrode surfaces via multiple points of connection (multipodal contacts) have begun to attract attention. Here an oligo(arylene)ethynylene (OAE) derivative with ''tripodal'' 2, 6-bis((methylthio)methyl)pyridine anchoring groups at both molecular termini has been prepared and used to form well-ordered monolayer Langmuir films at the air-water interface. These films were transferred onto solid supports (surface pressure of transference 8 mN m(-1)) to give homogeneous, densely packed, monolayer Langmuir-Blodgett (LB) films, which efficiently block a gold electrode surface. Within the surface-supported LB film, the molecules are oriented with a tilt angle of approximately 30 degrees to the surface normal and contacted through both the ''buttressed'' methylthioether groups and the pyridine nitrogen atom, as determined by X-ray photoelectron spectroscopy (XPS) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Molecular junctions formed by contact of a single molecule within the film by the "STM touch-to-contact" method give a most probable molecular conductance of 4.4 x 10(-5)G(0). This value compares well with the single molecule conductance of 1, 4-bis(pyridin-4-ylethynyl)benzene determined by a variety of methods (3.2-5.4 x 10(-5)G(0)), indicating that the addition of the buttressing groups does not perturb the favourable electrical characteristics of the pyridyl contacting group. Consistent with these conductance data, a transition voltage (V-trans = 0.48 V) was observed for this ''buttressed'', pyridine-contacted OAE derivative, indicating relatively good alignment of the metal electrode Fermi level and the frontier molecular orbitals.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrathin films of porous metal-organic polyhedra for gas separation

  • Andrés, Miguel A.|||0000-0003-3691-3437
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Sanchez-Lainez, Javier|||0000-0001-6627-0079
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Coronas, Joaquin|||0000-0003-1512-4500
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Gascón, Ignacio|||0000-0002-3492-6456
Ultrathin films of a robust Rh-based porous metal-organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air-water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP-supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO permeance and CO/N selectivity, demonstrating the great combined potential of MOP and Langmuir-based techniques in separation technologies.