Skip to main content

NANOESTRUCTURAS ESPINTRONICAS PARA TECNOLOGIAS DE LA INFORMACION CON EFICIENCIA ENERGETICA

MAT2017-82970-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 74
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gomez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia-Bermejo, Ricardo
  • Oró-Solé, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gazquez, Jaume
  • Rodriguez-Carvajal, Juan
  • Carretero-Genevrier, Adrián
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Generation of highly anisotropic physical properties in ferromagnetic thin films controlled by their differently oriented nano-sheets

  • Favieres Ruiz, Cristina
  • Vergara Platero, José
  • Magén, César
  • Ibarra, Manuel Ricardo
  • Madurga Pérez, Vicente
We fabricated ferromagnetic nano-crystalline thin films of Co, Fe, Co–Fe and Co-rich and Fe-rich, Co–MT and Fe–MT (MT = transition metal), constituted by nano-sheets with a controlled slant. Visualization of these nano-sheets by Scanning Tunneling Microscopy and HighResolution Transmission Electron Microscopy (HRTEM) showed typically tilt angles ≈56○ with respect to the substrate plane, and nano-sheets ≈3.0–4.0 nm thick, ≈30–100 nm wide, and ≈200–300 nm long, with an inter-sheet distance of ≈0.9–1.2 nm, depending on their constitutive elements. Induced by this nano-morphology, these films exhibited large uniaxial magnetic anisotropy in the plane, the easy direction of magnetization being parallel to the longitudinal direction of the nano-sheets. In the as-grown films, typical values of the anisotropy field were between Hk ≈ 48 and 110 kA/m depending on composition. The changes in the nano-morphology caused by thermal treatments, and hence in the anisotropic properties, were also visualized by HRTEM, including chemical analysis at the nano-scale. Some films retained their nano-sheet morphology and increased their anisotropies by up to three times after being heated to at least 500 ○C: for example, the thermal treatments produced crystallization processes and the growth of CoV and CoFe magnetic phases, maintaining the nano-sheet morphology. In contrast, other annealed films, Co, Fe, CoZn, CoCu. . . lost their nano-sheet morphology and hence their anisotropies. This work opens a path of study for these new magnetically anisotropic materials, particularly with respect to the nano-morphological and structural changes related to the increase in magnetic anisotropy., C. F., J. V., and V. M. acknowledge the partial financial support of the Universidad Pública de Navarra to attend the 68th Annual Conference on Magnetism and Magnetism Materials held in Dallas (TX, USA) to present the invited talk on which this work is based. C. M. and M. R. I. acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad, Project No. MAT2017–82970-C1 and C2-R and from the Aragón Regional, project E26.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid TiO2-Graphene nanoribbon photoanodes to improve the photoconversion efficiency of dye sensitized solar cells

  • Akilimali, Rusoma
  • Singh Selopal, Gurpreet
  • Benetti, Daniele
  • Serrano-Esparza, Inés
  • Algarabel, Pedro A.
  • Teresa, José María de
  • Wang, Zhiming M.
  • Stansfiel, Barry
  • Zhao, Haiguang
  • Rosei, Federico
We report the effect of incorporating different loadings of graphene nanoribbons (GNR) into a standard photoanode made of TiO2 sensitized with dye molecules. The GNRs are observed to significantly improve the photoconversion efficiency (PCE) of dye-sensitized solar cells (DSSCs). The TiO2-GNR hybrid photoanodes were prepared using the doctor-blade method. The presence of GNR in the composite photoanode was characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. Our results highlight that, at an optimum loading of 0.005 wt%, GNR increases the PCE of DSSCs up to values 20% higher than the PCE of control devices. This improvement is mainly attributed to improved dye loading, enhanced electron lifetime and reduced carrier recombination, as confirmed by quantitative measurements of dye loading, transient photovoltage decay and electrochemical impedance spectroscopy results, respectively., We acknowledge funding from the Natural Science and Engineering Research Council of Canada (NSERC), the Canada Foundation for Innovation for infrastructure support and its operating funds. F.R. is also grateful to the government of China for a Chiang Jiang scholar short term award and Sichuan province for a short term 1000 talent plan award. F.R. also acknowledges IFFS/UESTC for partial funding of this work. G.S.S. is supported by the Postdoctoral Science Foundation of China. F.R. is grateful to the Canada Research Chairs program for funding and partial salary support. I. S.E., P.A. and J.M.D.T. acknowledge support by INTERNEW EU project, MAT2017-82970-C2-2-R Spanish project (including FEDER funding) and Aragon regional government funding (Construyendo Europa desde Aragón) for grants E13_17R and E28_17R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

NanoSQUID magnetometry on individual as-grown and annealed Co nanowires at variable temperature

  • Martínez Pérez, M. J.
  • Pablo-Navarro, Javier
  • Müller, B.
  • Kleiner, R.
  • Magén, César
  • Koelle, D.
  • Teresa, José María de
  • Sesé Monclús, Javier
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to ∼100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures., This work was partly funded and supported by the Spanish MINECO (MAT2014-51982-C2, MAT2015-73914-JIN, MAT2015-64083-R, MAT2015-69725-REDT, MAT2017-82970-C2-1-R, and MAT2017-82970-C2-2-R), the Aragón Regional Government through projects E26, E09_17R, and E13_17R (Construyendo Europa desde Aragón), COST Action CA16218, COST Project CELINA, and the Deutsche Forschungsgemeinschaft via project KO 1301/13-2. J.P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores of the Spanish MINECO (BOE 12/06/15) with the participation of the European Social Fund. B.M. gratefully acknowledges support by the German Academic Scholarship Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vertical growth of superconducting crystalline hollow nanowires by He+ focused ion beam induced deposition

  • Córdoba, Rosa
  • Ibarra, Alfonso
  • Mailly, Dominique
  • Teresa, José María de
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (ξ0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1–x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2014-51982-C2-1-R, MAT2014-51982-C2-2-R, MAT2017-82970-C2-2-R, and from regional Gobierno de Aragon through project E26 and E81 with European Social Fund. R.C. acknowledges Juan de la Cierva-Incorporacion 2014 program. This project has received funding from the EU-H2020 research and innovation programme under Grant Agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cluster-glass dynamics of the Griffiths phase in Tb5−xLaxSi2Ge2

  • Marcano, N.
  • Algarabel, Pedro A.
  • Fernández Barquín, L.
  • Araújo, J. P.
  • Pereira, A.M.
  • Belo, J. H.
  • Magén, César
  • Morellón, Luis
  • Ibarra, M. Ricardo
The static magnetization and dynamic susceptibility responses of the cluster system within a Griffiths phase of the magnetocaloric compound Tb5−xLaxSi2Ge2 (x=0.075) have been investigated. A novel cluster-glass state within the Griffiths phase is formed at a characteristic freezing temperature where short-range ferromagnetic correlations set in the paramagnetic regime. Ferromagneticlike correlations are built up at around 155 K, which suddenly become frozen at a lower temperature ∼140K, thus in analogy with a reentrant spin glass behavior. The ac susceptibility near the freezing temperature follows a critical slowing down process characterized by τ0=10−13s and dynamic exponents zν∼6 and β∼0.4, similar to well-known spin glass systems. The nonlinear ac susceptibility analysis shows clearly the existence of a transition associated to the reentrant behavior. The origin of the intermediate cluster-glass phase inside the Griffiths phase is proposed to be the result of a combination of short-ranged RKKY intralayer positive exchange interactions between rare-earth Tb3+ ions and antiferromagnetic exchange between adjacent interlayers involving Si and Ge atoms in connection to the Tb3+ atoms., Work at the University of Zaragoza is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades MAT2017-82970-C2-2-R and Spanish DGA (Grant No. E26). Work at the University of Cantabria is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades MAT2017-83631-C3-R. J.H.B. would like to thank CICECO-Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (FCT Ref. UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diameter modulation of 3D nanostructures in focused electron beam induced deposition using local electric fields and beam defocus

  • Pablo-Navarro, Javier
  • Sangiao, S.
  • Magén, César
  • Teresa, José María de
Focused electron beam induced deposition (FEBID) is a leading nanolithography technique in terms of resolution and the capability for three-dimensional (3D) growth of functional nanostructures. However, FEBID still presents some limitations with respect to the precise control of the dimensions of the grown nano-objects as well as its use on insulating substrates. In the present work, we overcome both limitations by employing electrically-biased metal structures patterned on the surface of insulating substrates. Such patterned metal structures serve for charge dissipation and also allow the application of spatially-dependent electric fields. We demonstrate that such electric fields can dramatically change the dimensions of the growing 3D nanostructures by acting on the primary electron beam and the generated secondary electrons. In the performed experiments, the diameter of Pt-C and W-C vertical nanowires grown on quartz, MgO and amorphous SiO2 is tuned by application of moderate voltages (up to 200 V) on the patterned metal microstructures during growth, achieving diameters as small as 50 nm. We identify two competing effects arising from the generated electric fields: a slight change in the primary beam focus point and a strong action on the secondary electrons. Beam defocus is exploited to achieve the in situ modulation of the diameter of 3D FEBID structures during growth., Financial support from the Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2015-69725-REDT, from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_17R with European Social Fund funding is acknowledged. JP-N grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering the magnetic order in epitaxially strained Sr1−xBaxMnO3 perovskite thin films

  • Maurel, Laura
  • Marcano, N.
  • Langenberg, Eric
  • Guzmán, Roger
  • Prokscha, Thomas
  • Magén, César
  • Pardo, José A.
  • Algarabel, Pedro A.
Chemical doping and epitaxy can be used to tailor the magnetoelectric properties of multiferroic thin films, such as SrMnO3. Here, we study the dependence of the magnetic order temperatures of Sr1−xBaxMnO3 thin films on epitaxial strain and Ba content. Combining low-energy muon spin spectroscopy and scanning transmission electron microscopy, the broadness of the magnetic transition is attributed to the presence of a Mn-O-Mn angle gradient along the out-of-plane direction. We also demonstrate that the unit cell volume is the key parameter to determine the Néel temperature in Sr1−xBaxMnO3 thin films showing G-type antiferromagnetic order. The occurrence of a simultaneously ferroelectric and ferromagnetic ground state at high strain levels is suggested for the Sr0.8Ba0.2MnO3 thin film deposited on TbScO3., This work has been supported by the Spanish Ministry of Science through Project Nos. MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R and by the Aragon Regional Government through Project Nos. E13_17R and E28_17R (Construyendo Europa desde Aragón)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Winkler, Robert
  • Haberfehlner, Georg
  • Magén, César
  • Plank, Harald
  • Teresa, José María de
Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires further efforts to optimize simultaneously dimensional and compositional properties, in particular for deposits with a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve the final performance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, we report on real-time monitoring during chemical purification and structural crystallization processes of ultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growth in situ annealing in a transmission electron microscope. NW heating up to 700 °C in very high vacuum reveals the local increase of the metallic content along the entire NW length concomitant with the growth of large Fe single crystals from initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions, dramatically boosting the initial Fe content of 40 at. %. The real-time in situ tracking of 3D nanostructures during thermal annealing is a key element to design and optimize novel purification processes for the fabrication of customized components to be integrated in spintronic, logic and sensing devices., Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the projects MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through project and E13_17R with European Social Fund funding. J. P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores (BOE 12/06/15) of the Spanish MINECO with the participation of the European Social Fund. The financial support by the Austrian Federal Ministry for Digital and Economic Affairs and the National Foundation, Technology and Development is gratefully acknowledged. Financial support was also received from the FFG Austria in the frame of the “Beyond Europe” initiative (Project AIM, Nr. 11056459). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 823717 – ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelić, Željko L.
  • Sesé Monclús, Javier
  • Ibarra, M. Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosević, Milorad V.
  • Teresa, José María de
Under high-enough values of perpendicularly-applied magnetic feld and current, a type-II superconductor presents a fnite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36Ω has been measured at 2K in 3μm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant efect is accounted for by the existence of a strong edge confnement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors., Tis work was supported by the fnancial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2015-69725-REDT, MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, MDM-2014-0377, FIS2016-80434-P and the Fundación Ramón Areces, EU ERC (Grant Agreement No. 679080), COST Grant No. CA16128 and STSM Grant from COST Action CA16218, and from regional Gobierno de Aragón (grants E13_17R and E28_17R) with European Social Fund (Construyendo Europa desde Aragón) and Comunidad de Madrid through project Nanofrontmag-CM (Grant No. S2013/MIT-2850). R.C. acknowledges Juan de la Cierva-Incorporación 2014 program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mass sensing for the advanced fabrication of nanomechanical resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, Alexandros
  • Tepsic, S.
  • Magén, César
  • Sangiao, S.
  • Teresa, José María de
  • Verlot, P.
  • Bachtold, Adrian
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods., This work is supported by the ERC advanced Grant 692876, ERC PoC Grant 862149, the Foundation Cellex, the CERCA Programme, AGAUR, Severo Ochoa (SEV-2015−0522), the Grants FIS2015-69831-P, RTI2018-097953-B-I00, MAT2017- 82970-C2-1-R, and MAT2017-82970-C2-2-R of MINECO, the Fondo Europeo de Desarrollo Regional (FEDER), and the project E13_17R from Aragon Regional Government (Construyendo Europa desde Aragon). P.V. acknowledges support from the ERC starting Grant 758794 “Q-ROOT”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three-dimensional superconducting nanohelices grown by He+-focused-ion-beam direct writing

  • Córdoba, Rosa
  • Mailly, Dominique
  • Rezaev, Roman O.
  • Smirnova, Ekaterina I.
  • Schmidt, Oliver G.
  • Fomin, Vladimir M.
  • Zeitler, U.
  • Guillamón, Isabel
  • Suderow, Hermann
  • Teresa, José María de
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg–Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, MDM-2014-0377, EU ERC (grant agreement no. 679080), COST grant no. CA16128, and STSM grant 41199 for V.M.F. from COST Action CA16218, from the EU-H2020 research and innovation programme under grant agreement no. 654360 NFFA-Europe, from regional Gobierno de Aragon (grants E13_17R) with European Social Fund (Construyendo Europa desde Aragon) and Comunidad de Madrid through project Nanofrontmag-CM (grant no. S2013/ MIT-2850). Authors acknowledge the LMA-INA for offering access to their instruments and expertise and the use of Servicio General de Apoyo a la Investigacion-SAI, Universidad de Zaragoza, particularly the Servicio de Medidas Fisicas. The support of the German Research Foundation (DFG) via grant FO 956/5-1 is gratefully acknowledged. Authors acknowledge the Center for Information Services and High Performance Computing (ZIH) at TU Dresden for offering access to the HPC system. This work was supported by HFML-RU/NWO-I, member of the European Magnetic Field Laboratory (EMFL). It is part of the research program no. 132 “High Field Magnet Laboratory: a global player in science in high magnetic fields” financed by The Netherlands Organisation for Scientific Research (NWO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topotactic transformation in SrFeO3−δ triggered by low-dose Ga+ focused ion irradiation

  • Ferreiro-Vila, Elías
  • Bugallo, David
  • Magén, César
  • Rivadulla, Francisco
  • Teresa, José María de
We introduce a single-step lithography process based on Ga+-focused ion beam (FIB) irradiation to trigger a topotactic transformation on SrFeO3−δ thin films, from the perovskite to the brownmillerite (BM) crystal structure. The crystallographic transformation is triggered by preferential oxygen sputtering by Ga+-FIB irradiation, which favors the formation of the SrFeO2.5 BM phase. The transformation has been verified through micro-Raman spectroscopy on thin films subjected to Ga+-FIB irradiation under 5 kV and 30 kV. Inducing crystallographic transformations by FIB in a single-step process (without the need of resists), at a very high speed (low Ga+ doses are required, in the range of 1015 ions/cm2), with very high spatial resolution (limited by the ion beam spot, of a few square nanometers) and with potential for upscaling using broad Ga+ beams, this approach represents a significant forward step over previous methods using multistep lithographic or electrochemical procedures. All these virtues make this process appealing to develop applications based not only on SrFeO3−δ thin films but also on other oxide films harnessing topotactic transformations., This work was supported by the Spanish Ministry of Economy and Competitivity through Project Nos. MAT2017-82970-C2-2-R, MAT2018-102627-T, and MAT2016-80762-R (including FEDER funds), by the Aragon Regional Government through Project No. E13_20R (with European Social Fund), by Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, No. ED431G/09), and by the European Union (European Regional Development Fund-ERDF) and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016-Project No. 734187–SPICOLOST. D.B. acknowledges financial support from Ministerio de Ciencia e Investigación (Spain) through an FPI fellowship (No. BES-2017-079688)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, Miriam
  • Pablo-Navarro, Javier
  • Berganza, Eider
  • Ares, Pablo
  • Magén, César
  • Masseboeuf, Aurélien
  • Gatel, Christophe
  • Snoeck, Etienne
  • Gómez-Herrero, Julio
  • Teresa, José María de
  • Asenjo Barahona, Agustina
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples., M. J., E. B. and A. A. acknowledge the support from the Spanish Ministry of Economy and Competitiveness (MINECO) under project nos. MAT2015-73775-JIN and MAT2016-76824-C3-1-R. M. J. and J. G.-H acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through The “María de Maeztu” Programme for Units of Excellence in R&D (MDM-2014-0377). M. J. also acknowledges financial support from the Universidad Autónoma de Madrid and Comunidad Autónoma de Madrid through the project SI1/PJI/2019-00055. J. P.-N., C. M. and J. M. D. T. acknowledge financial support from the Spanish MINECO through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and RED2018-102627-T, from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3. J. P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Observation of unexpected uniaxial magnetic anisotropy in La2/3Sr1/3MnO3 films by a BaTiO3 overlayer in an artificial multiferroic bilayer

  • Ordóñez, John E.
  • Marín, Lorena
  • Rodríguez, Luis A.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Guzmán, Roger
  • Morellón, Luis
  • Magén, César
  • Snoeck, Etienne
  • Gómez, María E.
  • Ibarra, M. Ricardo
We studied in detail the in-plane magnetic properties of heterostructures based on a ferroelectric BaTiO3 overlayer deposited on a ferromagnetic La2/3Sr1/3MnO3 film grown epitaxially on pseudocubic (001)-oriented SrTiO3, (LaAlO3)0.3(Sr2TaAlO6)0.7 and LaAlO3 substrates. In this configuration, the combination of both functional perovskites constitutes an artificial multiferroic system with potential applications in spintronic devices based on the magnetoelectric effect. La2/3Sr1/3MnO3 single layers and BaTiO3/La2/3Sr1/3MnO3 bilayers using the pulsed-laser deposition technique. We analyzed the films structurally through X-ray reciprocal space maps and high-angle annular dark field microscopy, and magnetically via thermal demagnetization curves and in-plane magnetization versus applied magnetic field loops at room temperature. Our results indicate that the BaTiO3 layer induces an additional strain in the La2/3Sr1/3MnO3 layers close to their common interface. The presence of BaTiO3 on the surface of tensile-strained La2/3Sr1/3MnO3 films transforms the in-plane biaxial magnetic anisotropy present in the single layer into an in-plane uniaxial magnetic anisotropy. Our experimental evidence suggests that this change in the magnetic anisotropy only occurs in tensile-strained La2/3Sr1/3MnO3 film and is favored by an additional strain on the La2/3Sr1/3MnO3 layer promoted by the BaTiO3 film. These findings reveal an additional mechanism that alters the magnetic behavior of the ferromagnetic layer, and consequently, deserves further in-depth research to determine how it can modify the magnetoelectric coupling of this hybrid multiferroic system., This work has been supported financially by the “Instituto de Nanociencia de Aragón”, Zaragoza, Spain, where the films were partially grown and characterized; Center of Excellence for Novel Materials (CENM); COLCIENCIAS-UNIVALLE research project 110656933104, contract No.2013-0002; UNIVALLE research projects CI 7978 and CI 71109. This work was also supported by the Spanish Ministry of Science (through projects MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, including FEDER funding) and the Aragón Regional government (Project No. E26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Artificial double-helix for geometrical control of magnetic chirality

  • Sanz-Hernández, Dédalo
  • Hierro-Rodríguez, Aurelio
  • Donnelly, Claire
  • Pablo-Navarro, Javier
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Magén, César
  • McVitie, Stephen
  • Teresa, José María de
  • Ferrer, Salvador
  • Fischer, Peter
  • Fernández-Pacheco, Amalio
Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nanopatterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality., This work was funded by EPSRC Early Career Fellowship EP/M008517/1, the Winton Program for the Physics of Sustainability, and the EU CELINA COST action. D.S.-H. acknowledges a Girton College Pfeiffer scholarship and support from the EPSRC CDT in Nanoscience and Nanotechnology. A.H.-R. and S.M.V. acknowledge funding from the EU Horizon 2020 program through Marie Skłodowska-Curie Action H2020-MSCA-IF-2016-74695. C.D. acknowledges funding from Leverhulme Trust (ECF-2018-016), Isaac Newton Trust (18-08), and a L’Oréal-UNESCO UK and Ireland Fellowship for Women in Science 2019. Funding by the Spanish Ministry of Science is acknowledged, grants MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2018-102627-T, and by Aragon Government (Construyendo Europa desde Aragón), grant E13_20R including European Social Fund. J.P.-N. acknowledges MINECO funding BES-2015-072950. S.M.V. appreciates support from EPSRC EP/M024423/1. P.F. was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, Contract No. DE-AC02-05-CH11231 (NEMM program MSMAG). These experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff and CALIPSOplus (Grant 730872) funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Control of structural and magnetic properties of polycrystalline Co2FeGe films via deposition and annealing temperatures

  • Vovk, Andrii
  • Bunyaev, Sergey A.
  • Štrichovanec, Pavel
  • Vovk, Nikolay R.
  • Postolnyi, Bogdan
  • Apolinario, Arlete
  • Pardo, José A.
  • Algarabel, Pedro A.
  • Kakazei, Gleb N.
  • Araujo, João Pedro
This article belongs to the Special Issue Magnetic and Magnetoelectric Nanomaterials: Synthesis, Characterization and Applications., Thin polycrystalline Co2FeGe films with composition close to stoichiometry have been fabricated using magnetron co-sputtering technique. Effects of substrate temperature (TS) and post-deposition annealing (Ta) on structure, static and dynamic magnetic properties were systematically studied. It is shown that elevated TS (Ta) promote formation of ordered L21 crystal structure. Variation of TS (Ta) allow modification of magnetic properties in a broad range. Saturation magnetization ~920 emu/cm3 and low magnetization damping parameter α ~ 0.004 were achieved for TS = 573 K. This in combination with soft ferromagnetic properties (coercivity below 6 Oe) makes the films attractive candidates for spin-transfer torque and magnonic devices., Portuguese team acknowledges Network of Extreme Conditions Laboratories-NECL and Portuguese Foundation of Science and Technology (FCT) support through the projects PTDC/FIS-MAC/31302/2017, NORTE-01-0145-FEDER-022096, EXPL/IF/00541/2015 (S.A.B.), SFRH/BPD/84948/2012 (A.V.) and SFRH/BPD/87430/2012 (A.A.). This work was partially supported by Spanish Ministerio de Economía y Competitividad through project MAT2017-82970-C2 and from regional Gobierno de Aragón through project E28 20R including FEDER funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Critical current modulation induced by an electric field in superconducting tungsten-carbon nanowires

  • Orús, Pablo
  • Fomin, Vladimir M.
  • Teresa, José María de
  • Córdoba, Rosa
The critical current of a superconducting nanostructure can be suppressed by applying an electric field in its vicinity. This phenomenon is investigated throughout the fabrication and electrical characterization of superconducting tungsten-carbon (W-C) nanostructures grown by Ga+ focused ion beam induced deposition (FIBID). In a 45 nm-wide, 2.7 μm-long W-C nanowire, an increasing side-gate voltage is found to progressively reduce the critical current of the device, down to a full suppression of the superconducting state below its critical temperature. This modulation is accounted for by the squeezing of the superconducting current by the electric field within a theoretical model based on the Ginzburg–Landau theory, in agreement with experimental data. Compared to electron beam lithography or sputtering, the single-step FIBID approach provides with enhanced patterning flexibility and yields nanodevices with figures of merit comparable to those retrieved in other superconducting materials, including Ti, Nb, and Al. Exhibiting a higher critical temperature than most of other superconductors, in which this phenomenon has been observed, as well as a reduced critical value of the gate voltage required to fully suppress superconductivity, W-C deposits are strong candidates for the fabrication of nanodevices based on the electric field-induced superconductivity modulation., P.O. acknowledges Aragón Government for funding. The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008. Funding from the the European Union’s Horizon 2020 research and innovation programme under the grant agreement No 892427 has been received. Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2018-102627-T and MAT2017-82970-C2-2-R, from CSIC through project PIE202060E187, and from the Aragón Regional Government (Construyendo Europa desde Aragón) through Project E13_20R, with European Social Fund funding. The microscopy works have been conducted in the Laboratory for Advanced Microscopies (LMA), at the Institute of Nanoscience and Materials of Aragón (INMA)—University of Zaragoza. Authors acknowledge the LMA for offering access to their instruments and expertise. Authors acknowledge the use of the Physical Measurements Service in Servicio General de Apoyo a la Investigación (SAI)—University of Zaragoza. This work has been supported by projects H2020 (FATMOLSproject) and Excellence Unit María de Maeztu (CEX2019-000919-M). This work has been supported by the German Research Foundation (DFG) project #FO 956/6-1 (Germany) and European Cooperation in Science and Technology—COST Action #CA16218 (NANOCOHYBRI). V.M.F. acknowledges partial support from the MEPhI (Russia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cryo-focused ion beam-induced deposition of tungsten–carbon nanostructures using a thermoelectric plate

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
This article belongs to the Special Issue Nanoscale Assembly and Integration for Applications., Focused Ion Beam-Induced Deposition (FIBID) is a single-step nanopatterning technique that applies a focused beam of ions to induce the decomposition of a gaseous precursor. The processing rate of FIBID increases by two orders of magnitude when the process is performed at cryogenic temperatures (Cryo-FIBID): the precursor forms a condensed layer on the surface of the cooled substrate, greatly enhancing the amount of material available for decomposition. Cryo-FIBID has been achieved so far by making use of liquid nitrogen-based cooling circuits, which require the passage of a flowing gas as a cooling agent. Here, the Cryo-FIBID of the W(CO)6 precursor is performed using a coolant-free thermoelectric plate utilizing the Peltier effect. Performed at −60 ∘C, the procedure yields a W–C-based material with structural and electrical properties comparable to those of its counterpart grown in coolant-based Cryo-FIBID. The use of the thermoelectric plate significantly reduces the vibrations and sample drift induced by the flow of passing coolant gas and allows for the fabrication of similar nanostructures. In summary, the reported process represents a further step towards the practical implementation of the Cryo-FIBID technique, and it will facilitate its use by a broader research community., This research was funded by European Union’s Horizon 2020 research and innovation program with grant number 892427. This project was supported by the Spanish Ministry of Science through grant numbers MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and PID2020-112914RB-100, including FEDER funding, from CSIC through project PIE202060E187, and by Gobierno de Aragón through the grant number E13_20R with European Social Fund (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (MAT2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dimensionality-driven metal–insulator transition in spin–orbit-coupled IrO2

  • Arias-Egido, Eduardo
  • Laguna-Marco, M. A.
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Morellón, Luis
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Haskel, D.
  • Boada, Roberto
  • Díaz-Moreno, Sofía
This article is part of the themed collection: Recent Open Access Articles, A metal–insulator transition is observed in spin–orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ∼ 1.5–2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros–Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator., This work was partially supported by the Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER, UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE), the Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033 and by the Aragon Regional Government (Projects No. E12-20R and E28-20R). E. A-E acknowledges the Spanish MINECO and the European Social Fund for an FPI (Formación de Personal Investigador, 2015) grant. R. B. acknowledges funding support from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665919. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We acknowledge Diamond Light Source for time on I20-Scanning under Proposal SP-17266. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation Horizon 2020. The authors acknowledge funding from the project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union's Horizon 2020 Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Focused-electron-beam engineering of 3D magnetic nanowires

  • Magén, César
  • Pablo-Navarro, Javier
  • Teresa, José María de
This article belongs to the Special Issue Novel Magnetic Properties in Curved Geometries., Focused-electron-beam-induced deposition (FEBID) is the ultimate additive nanofabrication technique for the growth of 3D nanostructures. In the field of nanomagnetism and its technological applications, FEBID could be a viable solution to produce future high-density, low-power, fast nanoelectronic devices based on the domain wall conduit in 3D nanomagnets. While FEBID has demonstrated the flexibility to produce 3D nanostructures with almost any shape and geometry, the basic physical properties of these out-of-plane deposits are often seriously degraded from their bulk counterparts due to the presence of contaminants. This work reviews the experimental efforts to understand and control the physical processes involved in 3D FEBID growth of nanomagnets. Co and Fe FEBID straight vertical nanowires have been used as benchmark geometry to tailor their dimensions, microstructure, composition and magnetism by smartly tuning the growth parameters, post-growth purification treatments and heterostructuring., This research was funded by the Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding, the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund, and the European’s Union Horizon 2020 research and innovation programme under Grant No. 823713-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche, Alba
  • Sangiao, Soraya
  • Magén, César
  • Barrado, Mariano
  • Philipp, Patrick
  • Belotcerkovtceva, Daria
  • Venkata Kamalakar, M.
  • Cea, Pilar
  • Teresa, José María de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 μC cm−2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ∼28 nm-thick Co2(CO)8 layer on a substrate held at −100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 μΩ cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm−3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality., This project was supported by the Spanish Ministry of Science through the grant numbers PID2019-105881RB-I00, MAT2017-82970-C2-2-R and PID2020-112914RB-I00, including FEDER funding, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant number E31_20R with European Social Fund (Construyendo Europa desde Aragón). P. P. is grateful to the National Research Fund (FNR), Luxembourg (C17/MS/11682850/ULOWBEAM). M. V. K gratefully acknowledges funding from Swedish energy agency-Energimyndigheten (48698–1) and Swedish Research Council Formas (Grant no. 2019–01326). The following networking projects are acknowledged: Spanish Nanolito (MAT2018-102627-T) and COST-FIT4NANO (action CA19140). We thank preliminary tests and discussions with the master student Camilo Sánchez Velasquez (University of Zaragoza) and with Dr Pablo Orus (INMA). We acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interrelation of elasticity and thermal bath in nanotube cantilevers

  • Tepsic, S.
  • Gruber, G.
  • Møller, C. B.
  • Magén, César
  • Belardinelli, P.
  • Hernández, Eduardo R.
  • Alijani, F.
  • Verlot, P.
  • Bachtold, Adrian
We report the first study on the thermal behavior of the stiffness of individual carbon nanotubes, which is achieved by measuring the resonance frequency of their fundamental mechanical bending modes. We observe a reduction of the Young’s modulus over a large temperature range with a slope −(173±65)ppm/K in its relative shift. These findings are reproduced by two different theoretical models based on the thermal dynamics of the lattice. These results reveal how the measured fundamental bending modes depend on the phonons in the nanotube via the Young’s modulus. An alternative description based on the coupling between the measured mechanical modes and the phonon thermal bath in the Akhiezer limit is discussed., This work is supported by ERC advanced (Grant No. 692876), ERC PoC (Grant No. 862149), Marie Skłodowska-Curie (Grant No. 665884), PROBIST (Grant No. 754510), the Cellex Foundation, the CERCA Programme, AGAUR (Grant No. 2017SGR1664), Severo Ochoa (Grant No. SEV2015-0522), MICINN (Grants No. RTI2018-097953-B-I00 and No. PGC2018-096955-B-C44), the Fondo Europeo de Desarrollo Regional, the Grant No. MAT2017-82970-C2-2-R of Spanish MINECO and the Project No. E13_17R from Aragon Regional Government (Construyendo Europa desde Aragón). F. A. acknowledges support from European Research Council (ERC) starting Grant No. 802093. P. V. acknowledges support from European Research Council (ERC) starting grant 758794 “Q-ROOT.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic functionalization of scanning probes by focused electron beam induced deposition technology

  • Pablo-Navarro, Javier
  • Sangiao, Soraya
  • Magén, César
  • Teresa, José María de
This article belongs to the Special Issue Advances in Magnetic Force Microscopy., The fabrication of nanostructures with high resolution and precise control of the deposition site makes Focused Electron Beam Induced Deposition (FEBID) a unique nanolithography process. In the case of magnetic materials, apart from the FEBID potential in standard substrates for multiple applications in data storage and logic, the use of this technology for the growth of nanomagnets on different types of scanning probes opens new paths in magnetic sensing, becoming a benchmark for magnetic functionalization. This work reviews the recent advances in the integration of FEBID magnetic nanostructures onto cantilevers to produce advanced magnetic sensing devices with unprecedented performance., This research was funded by the Spanish Ministry of Economy and Competitiveness through the projects PID2020-112914RB-100, MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and MAT2018-102627-T, BES-2015-072950, the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding. This work has received funding from the European’s Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Omnipresence of weak antilocalization (WAL) in Bi2Se3 thin films: A review on its origin

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Bigi, Chiara
  • Kumar Chaluvadi, Sandeep
  • Orgiani, Pasquale
  • Teresa, José María de
This article belongs to the Special Issue Advances in Topological Materials: Fundamentals, Challenges and Outlook., Topological insulators are materials with time-reversal symmetric states of matter in which an insulating bulk is surrounded by protected Dirac-like edge or surface states. Among topological insulators, Bi2Se3 has attracted special attention due to its simple surface band structure and its relatively large band gap that should enhance the contribution of its surface to transport, which is usually masked by the appearance of defects. In order to avoid this difficulty, several features characteristic of topological insulators in the quantum regime, such as the weak-antilocalization effect, can be explored through magnetotransport experiments carried out on thin films of this material. Here, we review the existing literature on the magnetotransport properties of Bi2Se3 thin films, paying thorough attention to the weak-antilocalization effect, which is omnipresent no matter the film quality. We carefully follow the different situations found in reported experiments, from the most ideal situations, with a strong surface contribution, towards more realistic cases where the bulk contribution dominates. We have compared the transport data found in literature to shed light on the intrinsic properties of Bi2Se3, finding a clear relationship between the mobility and the phase coherence length of the films that could trigger further experiments on transport in topological systems., The research was funded by the Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, and the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of YIG/Bi stacks for spin-to-charge conversion and influence of aging

  • Sangiao, Soraya
  • Morales-Aragonés, José Ignacio
  • Lucas, Irene
  • Jiménez-Cavero, Pilar
  • Morellón, Luis
  • Sánchez-Azqueta, Carlos
  • Teresa, José María de
We show that an optimized growth of magnetic layer/non-magnetic layer stacks allows for the improvement of the spin-to-charge conversion efficiency. From the analysis of the voltage signal generated in spin pumping experiments due to the inverse spin Hall effect (ISHE) on Y3Fe5O12 (YIG)/Bi stacks, we have determined values for the spin Hall angle and the spin-diffusion length in Bi of 0.0068(8) and 17.8(9) nm, respectively. Based on these results, we have also studied the influence of aging on the spin-to-charge conversion efficiency by performing spin pumping experiments on YIG/Bi stacks after exposing the samples to ambient conditions for several days and up to 150 days. We have found that in YIG/Bi samples with Bi thicknesses around or below the spin-diffusion length, the ISHE voltage signal is still above 80% of its initial value after 100 days., Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R, from the University of Zaragoza through the project JIUZ-2019-CIE-08 and from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R, with the European Social Fund funding. P J-C acknowledges Spanish MECD for support through FPU program (FPU014/02546)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantification of the interfacial and bulk contributions to the longitudinal spin Seebeck effect

  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Bugallo, David
  • López-Bueno, Carlos
  • Ramos, Rafael
  • Algarabel, Pedro A.
  • Ibarra, M. Ricardo
  • Rivadulla, Francisco
  • Morellón, Luis
We report the disentanglement of bulk and interfacial contributions to the thermally excited magnon spin current in the spin Seebeck effect under static heating. For this purpose, we have studied the dependence of the inverse spin Hall voltage and the thermal conductivity on the magnetic layer thickness. Knowledge of these quantities allows us to take into account the influence of both sources of thermal spin current in the analysis of the voltage dependence. The magnetic layer thickness modulates the relative magnitude of the involved thermal drops for a fixed total thermal difference throughout the sample. In the end, we attain the separate contributions of both sources of thermal spin current—bulk and interfacial—and obtain the value of the thermal magnon accumulation length scale in maghemite, which we find to be 29(1) nm. According to our results, bulk magnon accumulation dominates the spin Seebeck effect in our studied range of thicknesses, but the interfacial component is by no means negligible., This work was supported by the Spanish Ministry of Science [through Project Nos. MAT2014-51982-C2-R, MAT2016-80762-R, MAT2017-82970-C2-R, and PID2019-104150RB-I00 (including FEDER funding) and the Aragón Regional government (Project No. E26)]. P.J.-C. acknowledges Spanish MECD for support through FPU program (Reference No. FPU014/02546). D.B. acknowledges support from MINECO (Spain) through an FPI program (No. BES-2017-079688). R.R. also acknowledges support from the European Commission through the Project No. 734187-SPICOLOST (H2020-MSCA-RISE-2016), the European Union's Horizon 2020 research and innovation program through the Marie Sklodowska-Curie Actions Grant Agreement SPEC No. 894006, and the Spanish Ministry of Science (No. RYC 2019-026915-I). Authors acknowledge the Advanced Microscopy Laboratory-INA University of Zaragoza for offering access to their instruments. C. L-B. acknowledges Xunta de Galicia and ESF for a PhD Grant (ED481A-2018/013)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relaxation mechanisms and strain-controlled oxygen vacancies in epitaxial SrMnO3 films

  • Langenberg, Eric
  • Maurel, Laura
  • Antorrena, Guillermo
  • Algarabel, Pedro A.
  • Magén, César
  • Pardo, José A.
SrMnO3 has a rich epitaxial strain-dependent ferroic phase diagram, in which a variety of magnetic orderings, even ferroelectricity, and thus multiferroicity, are accessible by gradually modifying the strain. Different relaxation processes, though, including the presence of strain-induced oxygen vacancies, can severely curtail the possibility of stabilizing these ferroic phases. Here, we report on a thorough investigation of the strain relaxation mechanisms in SrMnO3 films grown on several substrates imposing varying degrees of strain from slightly compressive (−0.39%) to largely tensile ≈+3.8%. First, we determine the strain dependency of the critical thickness (tc) below which pseudomorphic growth is obtained. Second, the mechanisms of stress relaxation are elucidated, revealing that misfit dislocations and stacking faults accommodate the strain above tc. Yet, even for films thicker than tc, the atomic monolayers below tc are proved to remain fully coherent. Therefore, multiferroicity may also emerge even in films that appear to be partially relaxed. Last, we demonstrate that fully coherent films with the same thickness present a lower oxygen content for increasing tensile mismatch with the substrate. This behavior proves the coupling between the formation of oxygen vacancies and epitaxial strain, in agreement with first-principles calculations, enabling the strain control of the Mn3+/Mn4+ ratio, which strongly affects the magnetic and electrical properties. However, the presence of oxygen vacancies/Mn3+ cations reduces the effective epitaxial strain in the SrMnO3 films and, thus, the accessibility to the strain-induced multiferroic phase., This work was financially supported by the Spanish Ministry of Science through project MAT2017-82970-C2-1-R and MAT2017-82970-C2-2-R and the Aragón Regional Government through projects E13_20R and E28_20R (Construyendo Europa desde Aragón). This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 823717—ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong crystallographic influence on spin hall mechanism in PLD-grown IrO2 thin films

  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Ara-Arteaga, Jorge
  • Ibarra, M. Ricardo
  • Algarabel, Pedro A.
  • Morellón, Luis
This article belongs to the Special Issue Iron Oxide Nanomaterials., Spin-to-charge conversion is a central process in the emerging field of spintronics. One of its main applications is the electrical detection of spin currents, and for this, the inverse spin Hall effect (ISHE) has become one of the preferred methods. We studied the thickness dependence of the ISHE in iridium oxide (IrO2) thin films, producing spin currents by means of the spin Seebeck effect in γ−Fe2O3/IrO2 bilayers prepared by pulsed laser deposition (PLD). The observed ISHE charge current density, which features a maximum as a consequence of the spin diffusion length scale, follows the typical behaviour of spin-Hall-related phenomena. By fitting to the theory developed by Castel et al., we find that the spin Hall angle θSH scales proportionally to the thin film resistivity, θSH∝ρc, and obtains a value for the spin diffusion length λIrO2 of λIrO2=3.3(7) nm. In addition, we observe a negative θSH for every studied thickness and temperature, unlike previously reported works, which brings the possibility of tuning the desired functionality of high-resistance spin-Hall-based devices. We attribute this behaviour to the textured growth of the sample in the context of a highly anisotropic value of the spin Hall conductivity in this material., This research was funded by the Spanish Ministry of Science grant number MAT2017-82970-C2, including FEDER funding, and the Aragón Regional government grant number E26. Pilar Jiménez-Cavero acknowledges Spanish MECD for support through the FPU program (reference FPU014/02546)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superconducting properties of in-plane W-C nanowires grown by He+ focused ion beam induced deposition

  • Orús, Pablo
  • Córdoba, Rosa
  • Hlawacek, Gregor
  • Teresa, José María de
Focused ion beam induced deposition (FIBID) is a nanopatterning technique that uses a focused beam of charged ions to decompose a gaseous precursor. So far, the flexible patterning capabilities of FIBID have been widely exploited in the fabrication of superconducting nanostructures, using the W(CO)6 precursor mostly in combination with a focused beam of Ga+ ions. Here, the fabrication and characterization of superconducting in-plane tungsten-carbon (W-C) nanostructures by He+ FIBID of the W(CO)6 precursor is reported. A patterning resolution of 10 nm has been achieved, which is virtually unattainable for Ga+ FIBID. When the nanowires are patterned with widths of 20 nm and above, the deposited material is superconducting below 3.5–4 K. In addition, nanowires with widths of 60 and 90 nm have been found to sustain long-range controlled nonlocal superconducting vortex transfer along 3 μm. Overall, these findings strengthen the capabilities of He+ FIBID of W-C in the growth and patterning of in-plane superconducting nanodevices., P Orús acknowledges Aragón Government for funding. This work was supported by a STSM grant from COST Action CA16218. The HIM works were performed in the Ion Beam Center at the Helmholz-Zentrum Dresden-Rossendorf, the access to which and whose support is acknowledged. The project that gave rise to these results received the support of a fellowship from 'la Caixa' Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008. Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2018-102627-T and MAT2017-82970-C2, from CSIC through project PIE202060E187, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through Project E13_20R, with European Social Fund funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput direct writing of metallic micro- and nano-structures by focused Ga+beam irradiation of palladium acetate films

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • Teresa, José María de
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 μC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 μΩ·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed., Authors acknowledge grants PID2019-105881RB-I00 and PID2020-112914RB-I00, MAT2017-82970-C2-2-R (including FEDER funding), funded by MCIN/AEI/10.13039/501100011033, CSIC, through projects PIE202060E187 and Research Platform PTI-001 and also Gobierno de Aragón through the grant number E13_20R and E31_20R with the European Social Fund (Construyendo Europa desde Aragón). P.P. is grateful to the National Research Fund (FNR), Luxembourg (C17/MS/11682850/ULOWBEAM). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T), COST-FIT4NANO (action CA19140), and OsMolsys (RED2018-102833-T). Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Indium segregation in Gd5(Si, Ge)4 magnetocaloric materials

  • Belo, João Horta
  • Mudryk, Y.
  • Pereira, André M.
  • Oliveira, G.N.P.
  • Lopes, Armandina M. L.
  • Paudyal, Durga
  • Morellón, Luis
  • Algarabel, Pedro A.
  • Magén, César
  • Ibarra, M. Ricardo
  • Marcano, Noelia
  • Pecharsky, Vitalij K.
  • Araujo, João Pedro
Chemical substitution is one of the most efficient tools to tune and optimize magnetic and magnetocaloric properties of the giant magnetocaloric materials. In particular, Indium substitutions could be useful both for tuning properties of these interesting intermetallic materials and to unveil their local-scale behavior across the magnetostructural transition via hyperfine techniques. Hence, in order to investigate the effect of Indium additions on the crystal structure, micro-structure, magnetic and magnetocaloric properties, a series of In-containing samples derived from the base Gd5Si1.2Ge2.8 stoichiometry were prepared. The major findings are that while In is insoluble in the 5: 4 phase, it will instead promote the emergence of the impurity 5: 3 phase and segregates into this phase. Hence, In leads to major crystallographic changes, which enhance atomic disorder and disrupt the Si to Ge ratio in the 5: 4 phase. Subsequently, a higher 5: 4 unit cell volume and a lower magnetic ordering temperature are found in the In-substituted samples. Finally, the magnetocaloric properties of the In-substituted samples reveal a detrimental effect on the maximum magnetic entropy change., Work is partially supported by the projects POCI/CTM/61284/2004, PTDC/CTM-NAN/115125/2009, FEDER/POCTI n0155/94 from Fundacão para a Ciência ex Tecnologia (FCT), Portugal. A.M.P. thanks FCT for the Grant No. SFRH/BPD/63150/2009. J H Belo thanks FCT for the Grant SFRH/BD/88440/2012, the project PTDC/FISMAC/ 31302/2017 and his contract DL57/2016 reference SFRH-BPD-87430/2012. Work at IFIMUP is supported by the following funding projects: POCI-01-0145-FEDER-032527, POCI-01–0145-FEDER-029454 and CERN-FIS-PAR-0005-2017. Work at the INMA is supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades through project MAT2017-82970-C2, PID2020-112914RB-I00 and Spanish DGA (grant no. E28−20R). The research at Ames Laboratory is supported by the Materials Sciences and Engineering Division, Office of Basic Energy Sciences of the U.S. Department of Energy (DOE). Ames Laboratory is operated for the U.S DOE by Iowa State University under Contract No. DE-AC02-07CH11358., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC cm−2 results in the lowest resistivity reported to date for PdNDs, namely 145 μΩ cm, which is only one order of magnitude higher than bulk palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps., This research was supported by the Spanish Ministry of Science through the grant numbers PID2019-105881RB-I00, MAT2017-82970-C2-2-R and PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, including FEDER funding, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant numbers LMP33-18, E12_20R and E31_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) COST-FIT4NANO (action CA19140) and OsMolsys (RED2018-102833-T). We acknowledge technical support by the LMA technicians at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vanadium trapped by oblique nano-sheets to preserve the anisotropy in Co–V thin films at high temperature

  • Favieres, Cristina
  • Vergara, José
  • Magén, César
  • Ibarra, M. Ricardo
  • Madurga, Vicente
In this study, oriented nano-sheets generated during the growth of cobalt-rich Co–V and Co–Zn thin films induced a large anisotropy in the magnetic and transport properties. The regular nano-sheets were tilted 52–54 deg. with respect to the substrate plane, ≈ 3.0–4.0 nm thick, ≈ 30–100 nm wide, and ≈ 200–300 nm long, with an inter-sheet distance of ≈ 0.9–1.2 nm. In spite of the different microstructures of the two kinds of samples where the Co–V films were amorphous, whereas the Co–Zn films showed a growth of Zn nanocrystals, the oblique nano-sheet morphology conferred noticeable shape anisotropy to both specimens. This anisotropy resulted in an in-plane uniaxial magnetic anisotropy. The changes in the nano-morphology caused by thermal treatments, and hence in their anisotropic properties, were studied. While the Co–V samples retained or increased their magnetic and transport anisotropies, this anisotropic behavior vanished for the annealed Co–Zn films. High resolution transmission electron microscopy, HRTEM, including chemical analysis at the nano-scale, and the dependence of the anisotropic resistance on temperature allowed to establish the nature and the activation energy spectra of the atomic relaxation processes during heating. These processes displayed a single peak at 1.63 eV for the Co–V and two peaks at 1.67 and 2.0 eV for the Co–Zn. These spectra and their singularities were associated to the changes induced in the nano-morphology of the films by thermal treatments. The Co–V films retained their nano-sheet morphology almost up to 500 ºC; the Co–Zn films lost their nano-sheets at 290 ºC. The thermal stability exhibited by the Co–V films makes them useful for applications in ultra high frequency, optical, magnetostrictive and magneto-electric devices., C. F., J. V., and V. M. acknowledge the financial support of the Public University of Navarre. C.M. and M.R.I. acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad in the project MAT2017–82970-C1 and C2-R and from the Aragón Regional project E26., Open access funding provided by Universidad Pública de Navarra., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Writing 3D nanomagnets using focused electron beams

  • Fernández-Pacheco, Amalio
  • Skoric, Luka
  • Teresa, José María de
  • Pablo-Navarro, Javier
  • Huth, Michael
  • Dobrovolskiy, Oleksandr V.
This article belongs to the Special Issue Three-Dimensional (3D) Nano Magnetism and Magnetic Materials., Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, o ering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures., AFP acknowledges funding by an EPSRC Early Career Fellowship EP/M008517/1, the Winton Program for the Physics of Sustainability. LS by the EPSRC Cambridge NanoDTC EP/L015978/1, St. Johns College of the University of Cambridge. JMDT by the Spanish MINECO through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and RED2018-102627-T. JMDT and JPN by the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding, the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund. OVD acknowledges financial support by the DFG under grant No. 374052683 (DO 1511/5-1), the FWF under grant No. I 4889 (CurviMag), and the COST Action CA16218 (NANOCOHYBRI) of the European Cooperation in Science and Technology. MH and OVD acknowledge support through the Frankfurt Center of Electron Microscopy (FCEM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data for Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Boada, Roberto
  • Proyecto: PID2020-115159GB-I00
All the experiments have been carried out on thin films of IrO2, the thickness and crystallinity of the each film being specified in each file. X-ray reflectivity (XRR) and X-ray diffraction measurements (XRD) were performed by using Bruker D8 and Rigaku D/max-2500 diffractometers, respectively, by using the Ka radiation line of copper. The electrical resistivity was measured using the four points van der Pauw method by means of a Quantum Design PPMS-9T with no applied magnetic field and with a small electric current (0.1 mA). Magnetization measurements were carried out by using a commercial SQUID magnetometer from Quantum Design. Magnetization versus temperature data were collected from 5 to 350 K with a heating rate of 5 K/min at 1000 Oe. High-energy resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XANES) measurements were carried out at RT by using a beamline I20-Scanning at Diamond Light Source. More informacion can be found in https://doi.org/10.1107/S1600577518008974. X-ray magnetic circular dichroism (XMCD) measurements were carried out at beamline 4-ID-D of the Advanced Photon Source, Argonne National Laboratory. Measurements were done in a cryomagnet with the sample cooled with 4He vapor. A 500 micron thick diamond phase plate was used to generate circularly polarized X-rays and XMCD measurements were carried out in helicity-switching mode. Measurements were done in fluorescence mode using a grazing incidence geometry and an energy dispersive 4-element Si drift diode detector placed at 90 degrees relative to the incident beam direction. XMCD Data were collected at 10 K with the magnetic fields along and opposite the X-ray propagation direction to remove any artifacts of nonmagnetic origin., Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER,UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE); Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033; Aragon Regional Government (Projects No. E12-20R and E28-20R); European Union’s Horizon 2020 program Marie Sklodowska-Curie grant agreement no. 665919; European Union’s Horizon 2020 Programme project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473)., XRD_IrO2_001epitaxy.dat XRD_IrO2_100epitaxy.dat XRD_IrO2_110epitaxy.dat XRD_IrO2_110textured.dat AFM_2d2nm_thick_001epitaxy.tif STEM_5d7_nm_thick_001epitaxy.tif XAS_IrO2_001epitaxy_5d7nm.dat XAS_IrO2_001epitaxy_96nm.dat XAS_IrO2_100epitaxy_1d7nm.dat XAS_IrO2_100epitaxy_5d1nm.dat XAS_IrO2_100epitaxy_89nm.dat XAS_IrO2_110epitaxy_5d3nm.dat XAS_IrO2_110epitaxy_92d2nm.dat XAS_IrO2_polycrystalline_films resistivity_IrO2_ 001epitaxy.dat resistivity_IrO2_ 100epitaxy.dat resistivity_IrO2_ 110epitaxy.dat resistivity_IrO2_ 110texture.dat MvsT_IrO2_001epitaxy_1d5nmthick.dat MvsT_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_powderIrO2.dat XRR_IrO2_5nmthick.dat XRR_IrO2_100nmthick.dat XAS_polycrystalline_vs_amorphous.dat rockingcurves_IrO2.dat RSM_IrO2_001epitaxy_5d7nm.dat RSM_IrO2_001epitaxy_96nm.dat RSM_IrO2_100epitaxy_5d1nm.dat RSM_IrO2_100epitaxy_89nm.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of highly anisotropic physical properties in ferromagnetic thin films controlled by their differently oriented nano-sheets

  • Favieres, Cristina
  • Vergara, José
  • Magén, César
  • Ibarra, M. Ricardo
  • Madurga, Vicente
Trabajo presentado a: 68th Annual Conference on Magnetism and Magnetism Materials held in Dallas (TX, USA)., We fabricated ferromagnetic nano-crystalline thin films of Co, Fe, Co–Fe and Co-rich and Fe-rich, Co–MT and Fe–MT (MT = transition metal), constituted by nano-sheets with a controlled slant. Visualization of these nano-sheets by Scanning Tunneling Microscopy and High-Resolution Transmission Electron Microscopy (HRTEM) showed typically tilt angles ≈56° with respect to the substrate plane, and nano-sheets ≈3.0–4.0 nm thick, ≈30–100 nm wide, and ≈200–300 nm long, with an inter-sheet distance of ≈0.9–1.2 nm, depending on their constitutive elements. Induced by this nano-morphology, these films exhibited large uniaxial magnetic anisotropy in the plane, the easy direction of magnetization being parallel to the longitudinal direction of the nano-sheets. In the as-grown films, typical values of the anisotropy field were between Hk ≈ 48 and 110 kA/m depending on composition. The changes in the nano-morphology caused by thermal treatments, and hence in the anisotropic properties, were also visualized by HRTEM, including chemical analysis at the nano-scale. Some films retained their nano-sheet morphology and increased their anisotropies by up to three times after being heated to at least 500 °C: for example, the thermal treatments produced crystallization processes and the growth of CoV and CoFe magnetic phases, maintaining the nano-sheet morphology. In contrast, other annealed films, Co, Fe, CoZn, CoCu… lost their nano-sheet morphology and hence their anisotropies. This work opens a path of study for these new magnetically anisotropic materials, particularly with respect to the nano-morphological and structural changes related to the increase in magnetic anisotropy., C. F., J. V., and V. M. acknowledge the partial financial support of the Universidad Pública de Navarra to attend the 68th Annual Conference on Magnetism and Magnetism Materials held in Dallas (TX, USA) to present the invited talk on which this work is based. C. M. and M. R. I. acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad, Project No. MAT2017–82970-C1 and C2-R and from the Aragón Regional, project E26., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Córdoba, Rosa
  • Ibarra, Alfonso
  • Mailly, Dominique
  • Guillamón, Isabel
  • Suderow, Hermann
  • Teresa, José María de
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 µm. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1- x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures., This work was supported by the financial support from Spanish Ministry of Economy and Competitiveness through the projects MAT2017-82970-C2-2-R, PIE201760E027, including FEDER funding, FIS2017-84330-R, CEX2018-000805-M, EU ERC (Grant Agreement No. 679080), from the EU-H2020 research and innovation programme under grant agreement No 654360 NFFA-Europe, and Nanocohybri COST CA-16218, from regional Gobierno de Aragón (grants E13_20R and E28-20R) with European Social Fund (Construyendo Europa desde Aragón) and Comunidad de Madrid through project NANOMAGCOST-CM (Grant No. (S2018/NMT-4321)). The project that gave rise to these results received the support of a fellowship from ”la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008. The French RENATECH network (French national nanofabrication platform)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diameter distribution by deconvolution (DdD): Absorption spectra as a practical tool for semiconductor nanoparticle PSD determination

  • Onna, Diego
  • Perez Ipiña, Ignacio
  • Fernández Casafuz, Agustina
  • Mayoral, Álvaro
  • Ibarra, M. Ricardo
  • Bilmes, Sara A.
  • Martínez Ricci, María Luz
Semiconductor nanoparticles (SNPs) are excellent candidates for various applications in fields like solar cells, light emitting diodes or sensors. Their size strongly determines their properties, thus characterizing their size is crucial for applications. In most cases, they are included in complex matrices which make it difficult to determine their average diameter and statistical distribution. In this work, we present a non-destructive, cheap and in situ procedure to calculate particle size distributions (PSDs) of SNPs in different media based on deconvolution of the absorbance spectrum with a database of the absorbance spectra of SNPs with different sizes. The method was validated against the SNP sizes obtained from transmission microscopy images, showing excellent agreement between both distributions. In particular, CdS SNPs embedded in mesoporous thin films were analyzed in detail. Additional composite systems were studied in order to extend the method to SNPs in polymers or bacteria, proving that it applies to several SNPs in diverse matrices. The PSDs obtained from the proposed method do not show any statistical difference with the one derived from TEM images. Finally, a web app that implements the methodology of this work has been developed., This work was supported by Universidad de Buenos Aires (UBACyT 20020170200298B) and RECOLA (ELAC2015/T02-0830). D. O., S. A. B. and M. L. M. R are members of CONICET. The Spanish Ministry of Economy and Competitiveness (Grant No. MAT2017-82970-C2, including FEDER) and the Aragon regional government (E26), Spain. The microscopy studies were conducted in the LMA at INA, Universidad de Zaragoza. AM acknowledges the National Natural Science Foundation of China for the projects NFSC-21850410448 and NSFC-21835002., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disordered hyperuniformity in superconducting vortex lattices

  • Benito Llorens, José
  • Guillamón, Isabel
  • Serrano, Ismael G.
  • Córdoba, Rosa
  • Sesé Monclús, Javier
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Vieira, Sebastián
  • Suderow, Hermann
The current carrying capability of type II superconductors under magnetic fields is determined to a large extent by the interaction of superconducting vortices with pinning centers. Vortices are arranged in lattices with varying degrees of disorder depending on the balance between the intervortex interactions and the pinning strength. We analyze here vortex arrangements in disordered vortex lattices of different superconducting systems, single crystals (Co-doped NbSe2, LiFeAs, and CaKFe4⁢As4), and amorphous W-based thin films (with critical temperatures 𝑇𝑐 from 4 K to 35 K and critical fields from 3.4 T to more than 90 T). We calculate for each case the structure factor and number variance and compare to calculations on an interacting set of partially pinned particles. We find that random density fluctuations appear when pinning overcomes interactions and show that the suppression of density fluctuations is correlated to the presence of interactions. We discuss the results within the framework of hyperuniform distributions and find that all studied lattices follow a similar increase of the number variance with the defect density., This work was supported by the Spanish State Agency for Research (Grants No. FIS2017-84330-R, No. MAT2017-82970-C2-1-R, No. MAT2017-82970-C2-2-R, No. RED2018-102627-T, No. RYC-2014-15093, and No. CEX2018-000805-M), the Aragón Regional Government (Construyendo Europa desde Aragón) through Projects No. E28_20R with European Social Fund funding, the Comunidad de Madrid through program NANOMAGCOST-CM (Grant No. S2018/NMT-4321), and EU Program No. CA16218 (Nanocohybri). I.G. acknowledges support from the European Research Council PNICTEYES (Grant Agreement No. 679080). M.O. acknowledges support from Fundación Séneca through Grant No. 19907/GERM/15. We also acknowledge SEGAINVEX at UAM. R.C. acknowledges the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pressure dependence of the Griffiths-like phase in 5:4 intermetallics

  • Marcano, Noelia
  • Algarabel, Pedro A.
  • Rodríguez Fernández, J.
  • Araujo, João Pedro
  • Pereira, André M.
  • Belo, João Horta
  • Magén, César
  • Morellón, Luis
  • Ibarra, M. Ricardo
We report a study of the effect of hydrostatic pressure (P) on the Griffiths-like phase in selected compounds of the 𝑅5⁢(Si𝑥⁢Ge1−𝑥)4 family of alloys (Tb4.925⁢La0.075⁢Si2⁢Ge2 and Gd5⁢Ge4) which present either the Gd5⁢Si2⁢Ge2-type (monoclinic, M) or the Sm5⁢Ge4-type [orthorhombic-II, O(II)] structural phases at room temperature. The downward deviation in the inverse low-field dc susceptibility 𝜒−1 𝑑⁢𝑐 from the Curie-Weiss law below a characteristic temperature 𝑇𝐺 indicates that the Griffiths-like phase exists at pressures up to 10 kbar. From the obtained T-P phase diagrams, the pressure coefficient of the Griffiths-like temperature, 𝑑⁢𝑇𝐺/𝑑⁢𝑃, has been determined. These results are compared with those obtained in Dy5⁢Si3⁢Ge in a previous work. The 𝑑⁢𝑇𝐺/𝑑⁢𝑃 coefficient is strongly dependent on the nature (first or second order) of the long-range order (FM or AFM) transition. This effect can be ascribed to a different structural character of the clusters within the Griffiths phase. A ratio of ∼0.5 between the 𝑑⁢𝑇𝐺/𝑑⁢𝑃 and the pressure coefficient of long-range magnetic ordering temperatures, 𝑑⁢𝑇𝐶,𝑁/𝑑⁢𝑃 (𝑇𝐶, ferromagnetic; 𝑇𝑁, antiferromagnetic), is found in all the studied compounds., Work at the University of Zaragoza is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades through Project No. MAT2017-82970-C2-2-R and the Aragon Regional Government (Grant No. E28_20R). Work at the University of Cantabria is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades through Project No. MAT2017-83631-C3-R. J.H.B. would like to thank FCT for Grant No. SFRH/BD/88440/2012, Project No. PTDC/FIS-MAC/31302/2017, and his Contract No. DL57/2016, Reference No. SFRH-BPD-87430/2012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: The successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • Teresa, José María de
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID., All authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2014-51982-C2, MAT2015-69725-REDT and MAT2017-82970-C2, from the COST Project CELINA, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through Project E26 with European Social Fund funding. A grant to J.P.-N. was funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretarı́a de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with participation of the European Social Fund., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mass sensing for the advanced fabrication of nanomechanical resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, A.
  • Tepsic, Slaven
  • Magén, C.
  • Sangiao, S.
  • Teresa, J. M. de
  • Verlot, P.
  • Bachtold, Adrian
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cluster-glass dynamics of the Griffiths phase in Tb5-xLaxSi2Ge2

  • Marcano, N.
  • Algarabel, P.A.
  • Barquín, L.F.
  • Araujo, J.P.
  • Pereira, A.M.
  • Belo, J.H.
  • Magén, C.
  • Morellón, L.
  • Ibarra, M.R.
The static magnetization and dynamic susceptibility responses of the cluster system within a Griffiths phase of the magnetocaloric compound Tb5-xLaxSi2Ge2 (x=0.075) have been investigated. A novel cluster-glass state within the Griffiths phase is formed at a characteristic freezing temperature where short-range ferromagnetic correlations set in the paramagnetic regime. Ferromagneticlike correlations are built up at around 155 K, which suddenly become frozen at a lower temperature ~140K, thus in analogy with a reentrant spin glass behavior. The ac susceptibility near the freezing temperature follows a critical slowing down process characterized by t0=10-13s and dynamic exponents z¿~6 and ß~0.4, similar to well-known spin glass systems. The nonlinear ac susceptibility analysis shows clearly the existence of a transition associated to the reentrant behavior. The origin of the intermediate cluster-glass phase inside the Griffiths phase is proposed to be the result of a combination of short-ranged RKKY intralayer positive exchange interactions between rare-earth Tb3+ ions and antiferromagnetic exchange between adjacent interlayers involving Si and Ge atoms in connection to the Tb3+ atoms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineering the magnetic order in epitaxially strained Sr1-xBaxMnO3 perovskite thin films

  • Maurel, L.
  • Marcano, N.
  • Langenberg, E.
  • Guzman, R.
  • Prokscha, T.
  • Magen, C.
  • Pardo, J. A.
  • Algarabel, P. A.
Chemical doping and epitaxy can be used to tailor the magnetoelectric properties of multiferroic thin films, such as SrMnO3. Here, we study the dependence of the magnetic order temperatures of Sr1-xBaxMnO3 thin films on epitaxial strain and Ba content. Combining low-energy muon spin spectroscopy and scanning transmission electron microscopy, the broadness of the magnetic transition is attributed to the presence of a Mn-O-Mn angle gradient along the out-of-plane direction. We also demonstrate that the unit cell volume is the key parameter to determine the Neel temperature in Sr1-xBaxMnO3 thin films showing G-type antiferromagnetic order. The occurrence of a simultaneously ferroelectric and ferromagnetic ground state at high strain levels is suggested for the Sr0.8Ba0.2MnO3 thin film deposited on TbScO3.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mass Sensing for the Advanced Fabrication of Nanomechanical Resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, A.: Tepsic, S.
  • Magén, C.
  • Sangiao, S.
  • De Teresa, J.M.
  • Verlot, P.
  • Bachtold, A.
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelic, Željk L.
  • Sesé, Javier
  • Ibarra, Manuel Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosevic, Milorad V.
  • De Teresa, José María
Under high-enough values of perpendicularly-applied magnetic field and current, a type-II superconductor presents a finite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50 nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36 O has been measured at 2 K in 3 µm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant effect is accounted for by the existence of a strong edge confinement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Room-Temperature AFM Electric-Field-Induced Topotactic Transformation between Perovskite and Brownmillerite SrFeOx with Sub-Micrometer Spatial Resolution

  • Ferreiro-Vila, E.
  • Blanco-Canosa, S.
  • Lucas del Pozo, I.
  • Vasili, H.B.
  • Magén, C.
  • Ibarra, A.
  • Rubio-Zuazo, J.
  • Castro, G.R.
  • Morellón, L.
  • Rivadulla, F.
Reversible structural transformations between perovskite (PV) ABO3- d and brownmillerite (BM) ABO2.5 (A = Ca2+, Sr2+; B = Fe4+/3, Co4+/3+) oxides can be induced by topotactic oxygen exchange at moderate temperatures under reducing/oxidizing conditions. The combination of a large oxide-ion conductivity and a small free energy difference between the 4+/3+ oxidation states of many 3d transition metal ions enables these topotactic transformations. Herein, it is demonstrated that the electric field produced by a voltage-biased atomic force microscopy tip can induce such transformation between PV SrFeO3- d and BM SrFeO2.5 at room temperature and with sub-micrometer spatial resolution. Interestingly, the structural transformation is kept after the electric field is removed, allowing a nonvolatile control of the local chemical, electrical, optical, and magnetic properties. Thus, the results presented in this paper open the door for the fabrication of stable ionic-based devices through the electric field patterning of different crystallographic phases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Observation of unexpected uniaxial magnetic anisotropy in La2/3Sr1/3MnO3 films by a BaTiO3 overlayer in an artificial multiferroic bilayer

  • Ordóñez, John E.
  • Marín, Lorena
  • Rodríguez, Luis A.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Guzmán, Roger
  • Morellón, Luis
  • Magén, César
  • Snoeck, Etienne
  • Gómez, María E.
  • Ibarra, Manuel R.
We studied in detail the in-plane magnetic properties of heterostructures based on a ferroelectric BaTiO3 overlayer deposited on a ferromagnetic La2/3Sr1/3MnO3 film grown epitaxially on pseudocubic (001)-oriented SrTiO3, (LaAlO3)0.3(Sr2TaAlO6)0.7 and LaAlO3 substrates. In this configuration, the combination of both functional perovskites constitutes an artificial multiferroic system with potential applications in spintronic devices based on the magnetoelectric effect. La2/3Sr1/3MnO3 single layers and BaTiO3/La2/3Sr1/3MnO3 bilayers using the pulsed-laser deposition technique. We analyzed the films structurally through X-ray reciprocal space maps and high-angle annular dark field microscopy, and magnetically via thermal demagnetization curves and in-plane magnetization versus applied magnetic field loops at room temperature. Our results indicate that the BaTiO3 layer induces an additional strain in the La2/3Sr1/3MnO3 layers close to their common interface. The presence of BaTiO3 on the surface of tensile-strained La2/3Sr1/3MnO3 films transforms the in-plane biaxial magnetic anisotropy present in the single layer into an in-plane uniaxial magnetic anisotropy. Our experimental evidence suggests that this change in the magnetic anisotropy only occurs in tensile-strained La2/3Sr1/3MnO3 film and is favored by an additional strain on the La2/3Sr1/3MnO3 layer promoted by the BaTiO3 film. These findings reveal an additional mechanism that alters the magnetic behavior of the ferromagnetic layer, and consequently, deserves further in-depth research to determine how it can modify the magnetoelectric coupling of this hybrid multiferroic system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Diameter modulation of 3D nanostructures in focused electron beam induced deposition using local electric fields and beam defocus

  • Pablo-Navarro, Javier
  • Sangiao, Soraya
  • Magén, César
  • De Teresa, José María
Focused electron beam induced deposition (FEBID) is a leading nanolithography technique in terms of resolution and the capability for three-dimensional (3D) growth of functional nanostructures. However, FEBID still presents some limitations with respect to the precise control of the dimensions of the grown nano-objects as well as its use on insulating substrates. In the present work, we overcome both limitations by employing electrically-biased metal structures patterned on the surface of insulating substrates. Such patterned metal structures serve for charge dissipation and also allow the application of spatially-dependent electric fields. We demonstrate that such electric fields can dramatically change the dimensions of the growing 3D nanostructures by acting on the primary electron beam and the generated secondary electrons. In the performed experiments, the diameter of Pt-C and W-C vertical nanowires grown on quartz, MgO and amorphous SiO2 is tuned by application of moderate voltages (up to 200 V) on the patterned metal microstructures during growth, achieving diameters as small as 50 nm. We identify two competing effects arising from the generated electric fields: a slight change in the primary beam focus point and a strong action on the secondary electrons. Beam defocus is exploited to achieve the in situ modulation of the diameter of 3D FEBID structures during growth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Writing 3D Nanomagnets Using Focused Electron Beams

  • Fernandez-Pacheco, A.
  • Skoric, L.
  • De Teresa, J.M.
  • Pablo-Navarro, J.
  • Huth, M.
  • Dobrovolskiy, O.V.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparison between focused electron/ion beam-induced deposition at room temperature and under cryogenic conditions

  • De Teresa, J. M.
  • Orús, P.
  • Córdoba, R.
  • Philipp, P.
In this contribution, we compare the performance of Focused Electron Beam-induced Deposition (FEBID) and Focused Ion Beam-induced Deposition (FIBID) at room temperature and under cryogenic conditions (the prefix "Cryo" is used here for cryogenic). Under cryogenic conditions, the precursor material condensates on the substrate, forming a layer that is several nm thick. Its subsequent exposure to a focused electron or ion beam and posterior heating to 50°C reveals the deposit. Due to the extremely low charge dose required, Cryo-FEBID and Cryo-FIBID are found to excel in terms of growth rate, which is typically a few hundred/thousand times higher than room-temperature deposition. Cryo-FIBID using the W(CO)6 precursor has demonstrated the growth of metallic deposits, with resistivity not far from the corresponding deposits grown at room temperature. This paves the way for its application in circuit edit and the fast and direct growth of micro/nano-electrical contacts with decreased ion damage. The last part of the contribution is dedicated to the comparison of these techniques with other charge-based lithography techniques in terms of the charge dose required and process complexity. The comparison indicates that Cryo-FIBID is very competitive and shows great potential for future lithography developments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of pt-c deposits by cryo-fibid: Substantial growth rate increase and quasi-metallic behaviour

  • Salvador-Porroche, A.
  • Sangiao, S.
  • Philipp, P.
  • Cea, P.
  • De Teresa, J.M.
The Focused Ion Beam Induced Deposition (FIBID) under cryogenic conditions (Cryo-FIBID) technique is based on obtaining a condensed layer of precursor molecules by cooling the substrate below the condensation temperature of the gaseous precursor material. This condensed layer is irradiated with ions according to a desired pattern and, subsequently, the substrate is heated above the precursor condensation temperature, revealing the deposits with the shape of the exposed pattern. In this contribution, the fast growth of Pt-C deposits by Cryo-FIBID is demonstrated. Here, we optimize various parameters of the process in order to obtain deposits with the lowest-possible electrical resistivity. Optimized ~30 nm-thick Pt-C deposits are obtained using ion irradiation area dose of 120 µC/cm2 at 30 kV. This finding represents a substantial increment in the growth rate when it is compared with deposits of the same thickness fabricated by standard FIBID at room temperature (40 times enhancement). The value of the electrical resistivity in optimized deposits (~4 × 104 µO cm) is suitable to perform electrical contacts to certain materials. As a proof of concept of the potential applications of this technology, a 100 µm × 100 µm pattern is carried out in only 43 s of ion exposure (area dose of 23 µC/cm2), to be compared with 2.5 h if grown by standard FIBID at room temperature. The ion trajectories and the deposit composition have been simulated using a binary-collision-approximation Monte Carlo code, providing a solid basis for the understanding of the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pressure dependence of the Griffiths-like phase in 5:4 intermetallics

  • Marcano, N.
  • Algarabel, P.A.
  • Fernández, J.R.
  • Araujo, J.P.
  • Pereira, A.M.
  • Belo, J.H.
  • Magén, C.
  • Morellón, L.
  • Ibarra, M.R.
We report a study of the effect of hydrostatic pressure (P) on the Griffiths-like phase in selected compounds of the R5(SixGe1-x)4 family of alloys (Tb4.925La0.075Si2Ge2 and Gd5Ge4) which present either the Gd5Si2Ge2-type (monoclinic, M) or the Sm5Ge4-type [orthorhombic-II, O(II)] structural phases at room temperature. The downward deviation in the inverse low-field dc susceptibility ¿dc-1 from the Curie-Weiss law below a characteristic temperature TG indicates that the Griffiths-like phase exists at pressures up to 10 kbar. From the obtained T-P phase diagrams, the pressure coefficient of the Griffiths-like temperature, dTG/dP, has been determined. These results are compared with those obtained in Dy5Si3Ge in a previous work. The dTG/dP coefficient is strongly dependent on the nature (first or second order) of the long-range order (FM or AFM) transition. This effect can be ascribed to a different structural character of the clusters within the Griffiths phase. A ratio of ~0.5 between the dTG/dP and the pressure coefficient of long-range magnetic ordering temperatures, dTC, N/dP (TC, ferromagnetic; TN, antiferromagnetic), is found in all the studied compounds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Disordered hyperuniformity in superconducting vortex lattices

  • Llorens, J.B.
  • Guillamon, I.
  • García Serrano, I.
  • Cordoba, R.
  • Sese, J.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vieira, S.
  • Ortuno, M.
  • Suderow, H.
The current carrying capability of type II superconductors under magnetic fields is determined to a large extent by the interaction of superconducting vortices with pinning centers. Vortices are arranged in lattices with varying degrees of disorder depending on the balance between the intervortex interactions and the pinning strength. We analyze here vortex arrangements in disordered vortex lattices of different superconducting systems, single crystals (Co-doped NbSe2, LiFeAs, and CaKFe4As4), and amorphous W- based thin films (with critical temperatures T-c from 4 K to 35 K and critical fields from 3.4 T to more than 90 T). We calculate for each case the structure factor and number variance and compare to calculations on an interacting set of partially pinned particles. We find that random density fluctuations appear when pinning overcomes interactions and show that the suppression of density fluctuations is correlated to the presence of interactions. We discuss the results within the framework of hyperuniform distributions and find that all studied lattices follow a similar increase of the number variance with the defect density.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, M.
  • Pablo-Navarro, J.
  • Berganza, E.
  • Ares, P.
  • Magén, C.
  • Masseboeuf, A.
  • Gatel, C.
  • Snoeck, E.
  • Gómez-Herrero, J.
  • de Teresa, J.M.
  • Asenjo, A.
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Focused-electron-beam engineering of 3d magnetic nanowires

  • Magén, C.
  • Pablo-Navarro, J.
  • De Teresa, J.M.
Focused-electron-beam-induced deposition (FEBID) is the ultimate additive nanofabrica-tion technique for the growth of 3D nanostructures. In the field of nanomagnetism and its techno-logical applications, FEBID could be a viable solution to produce future high-density, low-power, fast nanoelectronic devices based on the domain wall conduit in 3D nanomagnets. While FEBID has demonstrated the flexibility to produce 3D nanostructures with almost any shape and geometry, the basic physical properties of these out-of-plane deposits are often seriously degraded from their bulk counterparts due to the presence of contaminants. This work reviews the experimental efforts to understand and control the physical processes involved in 3D FEBID growth of nanomagnets. Co and Fe FEBID straight vertical nanowires have been used as benchmark geometry to tailor their dimensions, microstructure, composition and magnetism by smartly tuning the growth parameters, post-growth purification treatments and heterostructuring.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Topotactic transformation in SrFeO3- d triggered by low-dose Ga+ focused ion irradiation

  • Ferreiro-Vila, Elías
  • Bugallo, David
  • Magén, César
  • Rivadulla, Francisco
  • De Teresa, José María
We introduce a single-step lithography process based on Ga+-focused ion beam (FIB) irradiation to trigger a topotactic transformation on SrFeO3-d thin films, from the perovskite to the brownmillerite (BM) crystal structure. The crystallographic transformation is triggered by preferential oxygen sputtering by Ga+-FIB irradiation, which favors the formation of the SrFeO2.5 BM phase. The transformation has been verified through micro-Raman spectroscopy on thin films subjected to Ga+-FIB irradiation under 5 kV and 30 kV. Inducing crystallographic transformations by FIB in a single-step process (without the need of resists), at a very high speed (low Ga+ doses are required, in the range of 1015 ions/cm2), with very high spatial resolution (limited by the ion beam spot, of a few square nanometers) and with potential for upscaling using broad Ga+ beams, this approach represents a significant forward step over previous methods using multistep lithographic or electrochemical procedures. All these virtues make this process appealing to develop applications based not only on SrFeO3-d thin films but also on other oxide films harnessing topotactic transformations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Omnipresence of Weak Antilocalization (WAL) in Bi2Se3 Thin Films: A Review on Its Origin

  • Gracia Abad, Rubén
  • Sangiao Barral, Soraya
  • Bigi, Chiara
  • Chaluvadi, Sandeep Kumar
  • Orgiani, Pasquale
  • De Teresa Nogueras, José María
Topological insulators are materials with time-reversal symmetric states of matter in which an insulating bulk is surrounded by protected Dirac-like edge or surface states. Among topological insulators, Bi2Se3 has attracted special attention due to its simple surface band structure and its relatively large band gap that should enhance the contribution of its surface to transport, which is usually masked by the appearance of defects. In order to avoid this difficulty, several features characteristic of topological insulators in the quantum regime, such as the weak-antilocalization effect, can be explored through magnetotransport experiments carried out on thin films of this material. Here, we review the existing literature on the magnetotransport properties of Bi2Se3 thin films, paying thorough attention to the weak-antilocalization effect, which is omnipresent no matter the film quality. We carefully follow the different situations found in reported experiments, from the most ideal situations, with a strong surface contribution, towards more realistic cases where the bulk contribution dominates. We have compared the transport data found in literature to shed light on the intrinsic properties of Bi2Se3, finding a clear relationship between the mobility and the phase coherence length of the films that could trigger further experiments on transport in topological systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Relaxation Mechanisms and Strain-Controlled Oxygen Vacancies in Epitaxial SrMnO3 Films

  • Langenberg, Eric
  • Maurel, Laura
  • Antorrena, Guillermo
  • Algarabel, Pedro A.
  • Magén, César
  • Pardo, José A.
: SrMnO3 has a rich epitaxial strain-dependent ferroic phase diagram, in which a variety of magnetic orderings, even ferroelectricity, and thus multiferroicity, are accessible by gradually modifying the strain. Different relaxation processes, though, including the presence of strain-induced oxygen vacancies, can severely curtail the possibility of stabilizing these ferroic phases. Here, we report on a thorough investigation of the strain relaxation mechanisms in SrMnO3 films grown on several substrates imposing varying degrees of strain from slightly compressive (−0.39%) to largely tensile ≈+3.8%. First, we determine the strain dependency of the critical thickness (tc) below which pseudomorphic growth is obtained. Second, the mechanisms of stress relaxation are elucidated, revealing that misfit dislocations and stacking faults accommodate the strain above tc. Yet, even for films thicker than tc, the atomic monolayers below tc are proved to remain fully coherent. Therefore, multiferroicity may also emerge even in films that appear to be partially relaxed. Last, we demonstrate that fully coherent films with the same thickness present a lower oxygen content for increasing tensile mismatch with the substrate. This behavior proves the coupling between the formation of oxygen vacancies and epitaxial strain, in agreement with first-principles calculations, enabling the strain control of the Mn3+/Mn4+ ratio, which strongly affects the magnetic and electrical properties. However, the presence of oxygen vacancies/Mn3+ cations reduces the effective epitaxial strain in the SrMnO3 films and, thus, the accessibility to the strain-induced multiferroic phase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly-efficient growth of cobalt nanostructures using focused ion beam induced deposition under cryogenic conditions: Application to electrical contacts on graphene, magnetism and hard masking

  • Salvador-Porroche A.
  • Sangiao S.
  • Magén C.
  • Barrado M.
  • Philipp P.
  • Belotcerkovtceva D.
  • Kamalakar M.V.
  • Cea P.
  • Teresa J.M. de
Emergent technologies are required in the field of nanoelectronics for improved contacts and interconnects at nano and micro-scale. In this work, we report a highly-efficient nanolithography process for the growth of cobalt nanostructures requiring an ultra-low charge dose (15 µC cm-2, unprecedented in single-step charge-based nanopatterning). This resist-free process consists in the condensation of a ~28 nm-thick Co2(CO)8 layer on a substrate held at -100 °C, its irradiation with a Ga+ focused ion beam, and substrate heating up to room temperature. The resulting cobalt-based deposits exhibit sub-100 nm lateral resolution, display metallic behaviour (room-temperature resistivity of 200 µO cm), present ferromagnetic properties (magnetization at room temperature of 400 emu cm-3) and can be grown in large areas. To put these results in perspective, similar properties can be achieved by room-temperature focused ion beam induced deposition and the same precursor only if a 2 × 103 times higher charge dose is used. We demonstrate the application of such an ultra-fast growth process to directly create electrical contacts onto graphene ribbons, opening the route for a broad application of this technology to any 2D material. In addition, the application of these cryo-deposits for hard masking is demonstrated, confirming its structural functionality. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of YIG/Bi stacks for spin-to-charge conversion and influence of aging

  • Sangiao Barral, Soraya
  • Morales Aragonés, José Ignacio
  • Lucas del Pozo, Irene
  • Jiménez Cavero, Pilar
  • Morellón Alquézar, Luis
  • Sánchez Azqueta, Carlos
  • De Teresa Nogueras, José María
We show that an optimized growth of magnetic layer/non-magnetic layer stacks allows for the improvement of the spin-to-charge conversion efficiency. From the analysis of the voltage signal generated in spin pumping experiments due to the inverse spin Hall effect (ISHE) on Y3Fe5O12 (YIG)/Bi stacks, we have determined values for the spin Hall angle and the spin-diffusion length in Bi of 0.0068(8) and 17.8(9) nm, respectively. Based on these results, we have also studied the influence of aging on the spin-to-charge conversion efficiency by performing spin pumping experiments on YIG/Bi stacks after exposing the samples to ambient conditions for several days and up to 150 days. We have found that in YIG/Bi samples with Bi thicknesses around or below the spin-diffusion length, the ISHE voltage signal is still above 80% of its initial value after 100 days.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Critical current modulation induced by an electric field in superconducting tungsten-carbon nanowires

  • Orus, P
  • Fomin, VM
  • De Teresa, JM
  • Cordoba, R
The critical current of a superconducting nanostructure can be suppressed by applying an electric field in its vicinity. This phenomenon is investigated throughout the fabrication and electrical characterization of superconducting tungsten-carbon (W-C) nanostructures grown by Ga+ focused ion beam induced deposition (FIBID). In a 45 nm-wide, 2.7 mu m-long W-C nanowire, an increasing side-gate voltage is found to progressively reduce the critical current of the device, down to a full suppression of the superconducting state below its critical temperature. This modulation is accounted for by the squeezing of the superconducting current by the electric field within a theoretical model based on the Ginzburg-Landau theory, in agreement with experimental data. Compared to electron beam lithography or sputtering, the single-step FIBID approach provides with enhanced patterning flexibility and yields nanodevices with figures of merit comparable to those retrieved in other superconducting materials, including Ti, Nb, and Al. Exhibiting a higher critical temperature than most of other superconductors, in which this phenomenon has been observed, as well as a reduced critical value of the gate voltage required to fully suppress superconductivity, W-C deposits are strong candidates for the fabrication of nanodevices based on the electric field-induced superconductivity modulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetic functionalization of scanning probes by focused electron beam induced deposition technology

  • Pablo-Navarro, J.
  • Sangiao, S.
  • Magén, C.
  • Teresa, J.M. de
The fabrication of nanostructures with high resolution and precise control of the deposition site makes Focused Electron Beam Induced Deposition (FEBID) a unique nanolithography process. In the case of magnetic materials, apart from the FEBID potential in standard substrates for multiple applications in data storage and logic, the use of this technology for the growth of nanomagnets on different types of scanning probes opens new paths in magnetic sensing, becoming a benchmark for magnetic functionalization. This work reviews the recent advances in the integration of FEBID magnetic nanostructures onto cantilevers to produce advanced magnetic sensing devices with unprecedented performance. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High-Throughput Direct Writing of Metallic Micro- and Nano-Structures by Focused Ga+Beam Irradiation of Palladium Acetate Films; 35671475

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • De Teresa, José María
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 µC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 µ¿·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucia
  • Sangiao, Soraya
  • de Teresa, Jose Maria
  • Cea, Pilar
Abstract The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC·cm-2 results in the lowest resistivity reported to date for PdNDs, namely 145.1 μΩ·cm, which is only one order of magnitude higher than metallic palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Three-Dimensional Superconducting Nanohelices Grown by He+-Focused-Ion-Beam Direct Writing

  • Córdoba, R.
  • Mailly, D.
  • Rezaev, R.O.
  • Smirnova, E.I.
  • Schmidt, O.G.
  • Fomin, V.M.
  • Zeitler, U.
  • Guillamón, I.
  • Suderow, H.
  • De Teresa, J.M.
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg-Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Winkler, Robert
  • Haberfehlner, Georg
  • Magen, César
  • Plank, Harald
  • Teresa, José María de
Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires further efforts to optimize simultaneously dimensional and compositional properties, in particular for deposits with a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve the final performance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, we report on real-time monitoring during chemical purification and structural crystallization processes of ultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growth in situ annealing in a transmission electron microscope. NW heating up to 700 degrees C in very high vacuum reveals the local increase of the metallic content along the entire NW length concomitant with the growth of large Fe single crystals from initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions, dramatically boosting the initial Fe content of 40 at. %. The real-time in situ tracking of 3D nanostructures during thermal annealing is a key element to design and optimize novel purification processes for the fabrication of customized components to be integrated in spintronic, logic and sensing devices. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cryo-focused ion beam-induced deposition of tungsten–carbon nanostructures using a thermoelectric plate

  • Orús, P.
  • Sigloch, F.
  • Sangiao, S.
  • Teresa Nogueras, J.M. de
Focused Ion Beam-Induced Deposition (FIBID) is a single-step nanopatterning technique that applies a focused beam of ions to induce the decomposition of a gaseous precursor. The processing rate of FIBID increases by two orders of magnitude when the process is performed at cryogenic temperatures (Cryo-FIBID): the precursor forms a condensed layer on the surface of the cooled substrate, greatly enhancing the amount of material available for decomposition. Cryo-FIBID has been achieved so far by making use of liquid nitrogen-based cooling circuits, which require the passage of a flowing gas as a cooling agent. Here, the Cryo-FIBID of the W(CO)6 precursor is performed using a coolant-free thermoelectric plate utilizing the Peltier effect. Performed at-60 ºC, the procedure yields a W–C-based material with structural and electrical properties comparable to those of its counterpart grown in coolant-based Cryo-FIBID. The use of the thermoelectric plate significantly reduces the vibrations and sample drift induced by the flow of passing coolant gas and allows for the fabrication of similar nanostructures. In summary, the reported process represents a further step towards the practical implementation of the Cryo-FIBID technique, and it will facilitate its use by a broader research community. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strong crystallographic influence on spin hall mechanism in pld-grown iro2 thin films

  • Jiménez-Cavero P.
  • Lucas I.
  • Ara-Arteaga J.
  • Ibarra M.R.
  • Algarabel P.A.
  • Morellón L.
Spin-to-charge conversion is a central process in the emerging field of spintronics. One of its main applications is the electrical detection of spin currents, and for this, the inverse spin Hall effect (ISHE) has become one of the preferred methods. We studied the thickness dependence of the ISHE in iridium oxide (IrO2 ) thin films, producing spin currents by means of the spin Seebeck effect in ¿-Fe2 O3 /IrO2 bilayers prepared by pulsed laser deposition (PLD). The observed ISHE charge current density, which features a maximum as a consequence of the spin diffusion length scale, follows the typical behaviour of spin-Hall-related phenomena. By fitting to the theory developed by Castel et al., we find that the spin Hall angle ¿SH scales proportionally to the thin film resistivity, ¿SH ¿ ¿c, and obtains a value for the spin diffusion length ¿IrO2 of ¿IrO2 = 3.3(7) nm. In addition, we observe a negative ¿SH for every studied thickness and temperature, unlike previously reported works, which brings the possibility of tuning the desired functionality of high-resistance spin-Hall-based devices. We attribute this behaviour to the textured growth of the sample in the context of a highly anisotropic value of the spin Hall conductivity in this material. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Artificial Double-Helix for Geometrical Control of Magnetic Chirality

  • Sanz-Hernández, D.
  • Hierro-Rodriguez, A.
  • Donnelly, C.
  • Pablo-Navarro, J.
  • Sorrentino, A.
  • Pereiro, E.
  • Magén, C.
  • McVitie, S.
  • De Teresa, J.M.
  • Ferrer, S.
  • Fischer, P.
  • Fernández-Pacheco, A.
Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nanopatterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality. Copyright
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mass sensing for the advanced fabrication of nanomechanical resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, A.
  • Tepsic, Slaven
  • Magén, C.
  • Sangiao, S.
  • Teresa, J. M. de
  • Verlot, P.
  • Bachtold, Adrian
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods., Postprint (author's final draft)