Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mass sensing for the advanced fabrication of nanomechanical resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, Alexandros
  • Tepsic, S.
  • Magén, César
  • Sangiao, S.
  • Teresa, José María de
  • Verlot, P.
  • Bachtold, Adrian
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods., This work is supported by the ERC advanced Grant 692876, ERC PoC Grant 862149, the Foundation Cellex, the CERCA Programme, AGAUR, Severo Ochoa (SEV-2015−0522), the Grants FIS2015-69831-P, RTI2018-097953-B-I00, MAT2017- 82970-C2-1-R, and MAT2017-82970-C2-2-R of MINECO, the Fondo Europeo de Desarrollo Regional (FEDER), and the project E13_17R from Aragon Regional Government (Construyendo Europa desde Aragon). P.V. acknowledges support from the ERC starting Grant 758794 “Q-ROOT”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interrelation of elasticity and thermal bath in nanotube cantilevers

  • Tepsic, S.
  • Gruber, G.
  • Møller, C. B.
  • Magén, César
  • Belardinelli, P.
  • Hernández, Eduardo R.
  • Alijani, F.
  • Verlot, P.
  • Bachtold, Adrian
We report the first study on the thermal behavior of the stiffness of individual carbon nanotubes, which is achieved by measuring the resonance frequency of their fundamental mechanical bending modes. We observe a reduction of the Young’s modulus over a large temperature range with a slope −(173±65)ppm/K in its relative shift. These findings are reproduced by two different theoretical models based on the thermal dynamics of the lattice. These results reveal how the measured fundamental bending modes depend on the phonons in the nanotube via the Young’s modulus. An alternative description based on the coupling between the measured mechanical modes and the phonon thermal bath in the Akhiezer limit is discussed., This work is supported by ERC advanced (Grant No. 692876), ERC PoC (Grant No. 862149), Marie Skłodowska-Curie (Grant No. 665884), PROBIST (Grant No. 754510), the Cellex Foundation, the CERCA Programme, AGAUR (Grant No. 2017SGR1664), Severo Ochoa (Grant No. SEV2015-0522), MICINN (Grants No. RTI2018-097953-B-I00 and No. PGC2018-096955-B-C44), the Fondo Europeo de Desarrollo Regional, the Grant No. MAT2017-82970-C2-2-R of Spanish MINECO and the Project No. E13_17R from Aragon Regional Government (Construyendo Europa desde Aragón). F. A. acknowledges support from European Research Council (ERC) starting Grant No. 802093. P. V. acknowledges support from European Research Council (ERC) starting grant 758794 “Q-ROOT.”, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optomechanical Measurement of Thermal Transport in Two-Dimensional MoSe2 Lattices

  • Morell, Nicolas
  • Tepsic, Slaven
  • Reserbat-Plantey, Antoine
  • Cepellotti, Andrea
  • Manca, Marco
  • Epstein, Itai
  • Isacsson, Andreas
  • Marie, Xavier
  • Mauri, Francesco
  • Bachtold, Adrian
Nanomechanical resonators have emerged as sensors with exceptional sensitivities. These sensing capabilities open new possibilities in the studies of the thermodynamic properties in condensed matter. Here, we use mechanical sensing as a novel approach to measure the thermal properties of low-dimensional materials. We measure the temperature dependence of both the thermal conductivity and the specific heat capacity of a transition metal dichalcogenide monolayer down to cryogenic temperature, something that has not been achieved thus far with a single nanoscale object. These measurements show how heat is transported by phonons in two-dimensional systems. Both the thermal conductivity and the specific heat capacity measurements are consistent with predictions based on first-principles., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optomechanics with a hybrid carbon nanotube resonator

  • Tavernarakis, A.
  • Stavrinadis, A.
  • Nowak, A.
  • Tsioutsios, I.
  • Bachtold, Adrian
  • Verlot, P.
In just 20 years of history, the field of optomechanics has achieved impressive progress, stepping into the quantum regime just 5 years ago. Such remarkable advance relies on the technological revolution of nano-optomechanical systems, whose sensitivity towards thermal decoherence is strongly limited due to their ultra-low mass. Here we report a hybrid approach pushing nano-optomechanics to even lower scales. The concept relies on synthesising an efficient optical scatterer at the tip of singly clamped carbon nanotube resonators. We demonstrate high signal-to-noise motion readout and record force sensitivity, two orders of magnitude below the state of the art. Our work opens the perspective to extend quantum experiments and applications at room temperature., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ultrasensitive Displacement Noise Measurement of Carbon Nanotube Mechanical Resonators

  • Bonis, S. L. de
  • Urgell, C.
  • Yang, W.
  • Samanta, C.
  • Noury, A.
  • Vergara-Cruz, J.
  • Dong, Q.
  • Jin, Y.
  • Bachtold, Adrian
Mechanical resonators based on a single carbon nanotube are exceptional sensors of mass and force. The force sensitivity in these ultralight resonators is often limited by the noise in the detection of the vibrations. Here, we report on an ultrasensitive scheme based on a RLC resonator and a low-temperature amplifier to detect nanotube vibrations. We also show a new fabrication process of electromechanical nanotube resonators to reduce the separation between the suspended nanotube and the gate electrode down to ∼150 nm. These advances in detection and fabrication allow us to reach 0.5pm/ Hz displacement sensitivity. Thermal vibrations cooled cryogenically at 300 mK are detected with a signal-to-noise ratio as high as 17 dB. We demonstrate 4.3zN/ Hz force sensitivity, which is the best force sensitivity achieved thus far with a mechanical resonator. Our work is an important step toward imaging individual nuclear spins and studying the coupling between mechanical vibrations and electrons in different quantum electron transport regimes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Engineering high quality graphene superlattices via ion milled ultra-thin etching masks

  • Barcons Ruiz, David|||0000-0002-6271-2244
  • Sheinfux, Hanan Herzig
  • Hoffmann, Rebecca
  • Torre, Iacopo|||0000-0001-6515-181X
  • Agarwal, Hitesh
  • Kumar, Roshan Krishna
  • Vistoli, Lorenzo
  • Taniguchi, Takashi
  • Watanabe, Kenji
  • Bachtold, Adrian
  • Koppens, Frank
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~30¿nm pitch using electron beam lithography. Here, we demonstrate a nanofabrication technique which allows patterning periodic structures with a pitch down to 16¿nm. It is based on focused ion beam milling of suspended membranes, with minimal proximity effects typical to standard electron beam lithography. The membranes are then transferred and used as hard etching masks. We benchmark our technique by electrostatically inducing a superlattice potential in graphene and observe bandstructure modification in electronic transport. Our technique opens the path towards the realization of very short period superlattices in 2D materials, but with the ability to control lattice symmetries and strength. This can pave the way for a versatile solid-state quantum simulator platform and the study of correlated electron phases., D.B.R., H.H.S., R.H., I.T., H.A., R.K.K., L.V., A.B., and F.H.L.K. acknowledge funding from the Government of Spain through CEX2019-000910-S [MCIN/AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya through CERCA. D.B.R. acknowledges funding from the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, as well as the European Social Fund (L’FSE inverteix en el teu futur)-FEDER. H.H.S. acknowledges funding from the European Union’s Horizon 2020 programme under the Marie Skłodowska-Curie grant agreement Ref. 843830. H.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665884. R.K.K. acknowledges the EU Horizon 2020 program under the Marie SkłodowskaCurie grants 754510 and 893030. L.V. acknowledges funding from the H2020-MSCA-IF-2019 [887367-NanoMagnO]. A.B. acknowledges support from ERC Advanced Grant No. 692876 and MICINN Grant No. RTI2018-097953-B-I00, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847517 and 101023289, AGAUR (Grant No. 2017SGR1664), the Quantera grant (PCI2022- 132951), the Fondo Europeo de Desarrollo, Recovery, Transformation and Resilience Plan-Funded by the European UnionNextGenerationEU and Quantum CCAA. F.H.L.K. acknowledges support by the ERC TOPONANOP (726001), the Government of Spain (PID2019-106875GB-I00), and Generalitat de Catalunya (AGAUR, SGR 1656). Furthermore, the research leading to these results has received funding from the European Union’s Horizon 2020 under grant agreement no. 881603 (Graphene flagship Core 3) and 820378 (Quantum flagship)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optomechanics with a hybrid carbon nanotube resonator

  • Tavernarakis, A.
  • Stavrinadis, A.
  • Nowak, A.
  • Tsioutsios, I.
  • Bachtold, Adrian
In just 20 years of history, the field of optomechanics has achieved impressive progress, stepping into the quantum regime just 5 years ago. Such remarkable advance relies on the technological revolution of nano-optomechanical systems, whose sensitivity towards thermal decoherence is strongly limited due to their ultra-low mass. Here we report a hybrid approach pushing nano-optomechanics to even lower scales. The concept relies on synthesising an efficient optical scatterer at the tip of singly clamped carbon nanotube resonators. We demonstrate high signal-to-noise motion readout and record force sensitivity, two orders of magnitude below the state of the art. Our work opens the perspective to extend quantum experiments and applications at room temperature., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mass Sensing for the Advanced Fabrication of Nanomechanical Resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, A.: Tepsic, S.
  • Magén, C.
  • Sangiao, S.
  • De Teresa, J.M.
  • Verlot, P.
  • Bachtold, A.
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Engineering high quality graphene superlattices via ion milled ultra-thin etching masks

  • Barcons Ruiz, David
  • Sheinfux, Hanan Herzig
  • Hoffmann, Rebecca
  • Torre, Iacopo
  • Agarwal, Hitesh
  • Kumar, Roshan Krishna
  • Vistoli, Lorenzo
  • Taniguchi, Takashi
  • Watanabe, Kenji
  • Bachtold, Adrian
  • Koppens, Frank
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~30¿nm pitch using electron beam lithography. Here, we demonstrate a nanofabrication technique which allows patterning periodic structures with a pitch down to 16¿nm. It is based on focused ion beam milling of suspended membranes, with minimal proximity effects typical to standard electron beam lithography. The membranes are then transferred and used as hard etching masks. We benchmark our technique by electrostatically inducing a superlattice potential in graphene and observe bandstructure modification in electronic transport. Our technique opens the path towards the realization of very short period superlattices in 2D materials, but with the ability to control lattice symmetries and strength. This can pave the way for a versatile solid-state quantum simulator platform and the study of correlated electron phases., D.B.R., H.H.S., R.H., I.T., H.A., R.K.K., L.V., A.B., and F.H.L.K. acknowledge funding from the Government of Spain through CEX2019-000910-S [MCIN/AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya through CERCA. D.B.R. acknowledges funding from the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, as well as the European Social Fund (L’FSE inverteix en el teu futur)-FEDER. H.H.S. acknowledges funding from the European Union’s Horizon 2020 programme under the Marie Skłodowska-Curie grant agreement Ref. 843830. H.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665884. R.K.K. acknowledges the EU Horizon 2020 program under the Marie SkłodowskaCurie grants 754510 and 893030. L.V. acknowledges funding from the H2020-MSCA-IF-2019 [887367-NanoMagnO]. A.B. acknowledges support from ERC Advanced Grant No. 692876 and MICINN Grant No. RTI2018-097953-B-I00, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847517 and 101023289, AGAUR (Grant No. 2017SGR1664), the Quantera grant (PCI2022- 132951), the Fondo Europeo de Desarrollo, Recovery, Transformation and Resilience Plan-Funded by the European UnionNextGenerationEU and Quantum CCAA. F.H.L.K. acknowledges support by the ERC TOPONANOP (726001), the Government of Spain (PID2019-106875GB-I00), and Generalitat de Catalunya (AGAUR, SGR 1656). Furthermore, the research leading to these results has received funding from the European Union’s Horizon 2020 under grant agreement no. 881603 (Graphene flagship Core 3) and 820378 (Quantum flagship)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ultrasensitive Displacement Noise Measurement of Carbon Nanotube Mechanical Resonators

  • Bonis, S. L. de
  • Urgell, C.
  • Yang, W.
  • Samanta, C.
  • Noury, A.
  • Vergara-Cruz, J.
  • Dong, Q.
  • Jin, Y.
  • Bachtold, Adrian
Mechanical resonators based on a single carbon nanotube are exceptional sensors of mass and force. The force sensitivity in these ultralight resonators is often limited by the noise in the detection of the vibrations. Here, we report on an ultrasensitive scheme based on a RLC resonator and a low-temperature amplifier to detect nanotube vibrations. We also show a new fabrication process of electromechanical nanotube resonators to reduce the separation between the suspended nanotube and the gate electrode down to ∼150 nm. These advances in detection and fabrication allow us to reach 0.5pm/ Hz displacement sensitivity. Thermal vibrations cooled cryogenically at 300 mK are detected with a signal-to-noise ratio as high as 17 dB. We demonstrate 4.3zN/ Hz force sensitivity, which is the best force sensitivity achieved thus far with a mechanical resonator. Our work is an important step toward imaging individual nuclear spins and studying the coupling between mechanical vibrations and electrons in different quantum electron transport regimes., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optomechanical Measurement of Thermal Transport in Two-Dimensional MoSe2 Lattices

  • Morell, Nicolas
  • Tepsic, Slaven
  • Reserbat-Plantey, Antoine
  • Cepellotti, Andrea
  • Manca, Marco
  • Epstein, Itai
  • Isacsson, Andreas
  • Marie, Xavier
  • Mauri, Francesco
  • Bachtold, Adrian
Nanomechanical resonators have emerged as sensors with exceptional sensitivities. These sensing capabilities open new possibilities in the studies of the thermodynamic properties in condensed matter. Here, we use mechanical sensing as a novel approach to measure the thermal properties of low-dimensional materials. We measure the temperature dependence of both the thermal conductivity and the specific heat capacity of a transition metal dichalcogenide monolayer down to cryogenic temperature, something that has not been achieved thus far with a single nanoscale object. These measurements show how heat is transported by phonons in two-dimensional systems. Both the thermal conductivity and the specific heat capacity measurements are consistent with predictions based on first-principles., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optomechanics with a hybrid carbon nanotube resonator

  • Tavernarakis, A.
  • Stavrinadis, A.
  • Nowak, A.
  • Tsioutsios, I.
  • Bachtold, Adrian
  • Verlot, P.
In just 20 years of history, the field of optomechanics has achieved impressive progress, stepping into the quantum regime just 5 years ago. Such remarkable advance relies on the technological revolution of nano-optomechanical systems, whose sensitivity towards thermal decoherence is strongly limited due to their ultra-low mass. Here we report a hybrid approach pushing nano-optomechanics to even lower scales. The concept relies on synthesising an efficient optical scatterer at the tip of singly clamped carbon nanotube resonators. We demonstrate high signal-to-noise motion readout and record force sensitivity, two orders of magnitude below the state of the art. Our work opens the perspective to extend quantum experiments and applications at room temperature., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optomechanics with a hybrid carbon nanotube resonator

  • Tavernarakis, A.
  • Stavrinadis, A.
  • Nowak, A.
  • Tsioutsios, I.
  • Bachtold, Adrian
In just 20 years of history, the field of optomechanics has achieved impressive progress, stepping into the quantum regime just 5 years ago. Such remarkable advance relies on the technological revolution of nano-optomechanical systems, whose sensitivity towards thermal decoherence is strongly limited due to their ultra-low mass. Here we report a hybrid approach pushing nano-optomechanics to even lower scales. The concept relies on synthesising an efficient optical scatterer at the tip of singly clamped carbon nanotube resonators. We demonstrate high signal-to-noise motion readout and record force sensitivity, two orders of magnitude below the state of the art. Our work opens the perspective to extend quantum experiments and applications at room temperature., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cooling and self-oscillation in a nanotube electromechanical resonator

  • Urgell, C.
  • Yang, Wei
  • De Bonis, Sergio Lucio|||0000-0001-9618-6986
  • Samanta, Chandan|||0000-0002-4160-2839
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Dong, Q.
  • Jin, Y.
  • Bachtold, Adrian|||0000-0002-6145-2479
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins and electrons. The motion of a mechanical eigenmode can be efficiently cooled into the quantum regime using photons, but not other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification and self-oscillation using electrons. This is achieved by applying a constant (d.c.) current of electrons through a suspended nanotube in a dilution refrigerator. We demonstrate cooling to 4.6 ± 2.0 quanta of vibrations. We also observe self-oscillation, which can lead to prominent instabilities in the electron transport through the nanotube. We attribute the origin of the observed cooling and self-oscillation to an electrothermal effect. This work shows that electrons may become a useful resource for cooling the mechanical vibrations of nanoscale systems into the quantum regime.