Skip to main content

RED ESPAÑOLA DE NANOLITOGRAFIA

RED2018-102627-T

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Redes Investigación /Redes Excelencia
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, Miriam
  • Pablo-Navarro, Javier
  • Berganza, Eider
  • Ares, Pablo
  • Magén, César
  • Masseboeuf, Aurélien
  • Gatel, Christophe
  • Snoeck, Etienne
  • Gómez-Herrero, Julio
  • Teresa, José María de
  • Asenjo Barahona, Agustina
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples., M. J., E. B. and A. A. acknowledge the support from the Spanish Ministry of Economy and Competitiveness (MINECO) under project nos. MAT2015-73775-JIN and MAT2016-76824-C3-1-R. M. J. and J. G.-H acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through The “María de Maeztu” Programme for Units of Excellence in R&D (MDM-2014-0377). M. J. also acknowledges financial support from the Universidad Autónoma de Madrid and Comunidad Autónoma de Madrid through the project SI1/PJI/2019-00055. J. P.-N., C. M. and J. M. D. T. acknowledge financial support from the Spanish MINECO through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and RED2018-102627-T, from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3. J. P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput direct writing of metallic micro- and nano-structures by focused Ga+beam irradiation of palladium acetate films

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Philipp, Patrick
  • Cea, Pilar
  • Teresa, José María de
Metallic nanopatterns are ubiquitous in applications that exploit the electrical conduction at the nanoscale, including interconnects, electrical nanocontacts, and small gaps between metallic pads. These metallic nanopatterns can be designed to show additional physical properties (optical transparency, plasmonic effects, ferromagnetism, superconductivity, heat evacuation, etc.). For these reasons, an intense search for novel lithography methods using uncomplicated processes represents a key on-going issue in the achievement of metallic nanopatterns with high resolution and high throughput. In this contribution, we introduce a simple methodology for the efficient decomposition of Pd3(OAc)6 spin-coated thin films by means of a focused Ga+ beam, which results in metallic-enriched Pd nanostructures. Remarkably, the usage of a charge dose as low as 30 μC/cm2 is sufficient to fabricate structures with a metallic Pd content above 50% (at.) exhibiting low electrical resistivity (70 μΩ·cm). Binary-collision-approximation simulations provide theoretical support to this experimental finding. Such notable behavior is used to provide three proof-of-concept applications: (i) creation of electrical contacts to nanowires, (ii) fabrication of small (40 nm) gaps between large metallic contact pads, and (iii) fabrication of large-area metallic meshes. The impact across several fields of the direct decomposition of spin-coated organometallic films by focused ion beams is discussed., Authors acknowledge grants PID2019-105881RB-I00 and PID2020-112914RB-I00, MAT2017-82970-C2-2-R (including FEDER funding), funded by MCIN/AEI/10.13039/501100011033, CSIC, through projects PIE202060E187 and Research Platform PTI-001 and also Gobierno de Aragón through the grant number E13_20R and E31_20R with the European Social Fund (Construyendo Europa desde Aragón). P.P. is grateful to the National Research Fund (FNR), Luxembourg (C17/MS/11682850/ULOWBEAM). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T), COST-FIT4NANO (action CA19140), and OsMolsys (RED2018-102833-T). Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC cm−2 results in the lowest resistivity reported to date for PdNDs, namely 145 μΩ cm, which is only one order of magnitude higher than bulk palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps., This research was supported by the Spanish Ministry of Science through the grant numbers PID2019-105881RB-I00, MAT2017-82970-C2-2-R and PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, including FEDER funding, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant numbers LMP33-18, E12_20R and E31_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) COST-FIT4NANO (action CA19140) and OsMolsys (RED2018-102833-T). We acknowledge technical support by the LMA technicians at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superconducting materials and devices grown by focused ion and electron beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • Teresa, José María de
This article belongs to the Special Issue Current Review in Synthesis, Interfaces, and Nanostructures., Since its discovery in 1911, superconductivity has represented an equally inciting and fascinating field of study in several areas of physics and materials science, ranging from its most fundamental theoretical understanding, to its practical application in different areas of engineering. The fabrication of superconducting materials can be downsized to the nanoscale by means of Focused Ion/Electron Beam Induced Deposition: nanopatterning techniques that make use of a focused beam of ions or electrons to decompose a gaseous precursor in a single step. Overcoming the need to use a resist, these approaches allow for targeted, highly-flexible nanopatterning of nanostructures with lateral resolution in the range of 10 nm to 30 nm. In this review, the fundamentals of these nanofabrication techniques are presented, followed by a literature revision on the published work that makes use of them to grow superconducting materials, the most remarkable of which are based on tungsten, niobium, molybdenum, carbon, and lead. Several examples of the application of these materials to functional devices are presented, related to the superconducting proximity effect, vortex dynamics, electric-field effect, and to the nanofabrication of Josephson junctions and nanoSQUIDs. Owing to the patterning flexibility they offer, both of these techniques represent a powerful and convenient approach towards both fundamental and applied research in superconductivity., This research was supported by the European Commission under H2020 FET Open grant ’FIBsuperProbes’ (number 892427), the grant PID2020-112914RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition

  • Sigloch, Fabian
  • Sangiao, Soraya
  • Orús, Pablo
  • Teresa, José María de
NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W–C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 μV/Φ0), which correlates with the high resistivity of W–C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications., This research was supported by the European Commission under H2020 FET Open grant ‘FIBsuperProbes’ (number 892427), by the Spanish Ministry of Science through the grant PID2020-112914RB-I00, from CSIC through projects PIE202060E187 and Research Platform PTI-001, and by Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • Teresa, José María de
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity., The research of our group on this topic has benefited from the following sponsors and grants: the European Commission under H2020 FET Open Grant 'FIBsuperProbes' (No. 892427), the Spanish Ministry of Science through the Grant PID2020-112914RB-I00, CSIC through Projects PIE202060E187 and Research Platform PTI-001, Gobierno de Aragón through the grant E13_20R with European Social Funds (Construyendo Europa desde Aragón). The following networking Projects are acknowledged: Spanish Nanolito (RED2018-102627-T) and COST-FIT4NANO (action CA19140)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Writing 3D nanomagnets using focused electron beams

  • Fernández-Pacheco, Amalio
  • Skoric, Luka
  • Teresa, José María de
  • Pablo-Navarro, Javier
  • Huth, Michael
  • Dobrovolskiy, Oleksandr V.
This article belongs to the Special Issue Three-Dimensional (3D) Nano Magnetism and Magnetic Materials., Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, o ering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures., AFP acknowledges funding by an EPSRC Early Career Fellowship EP/M008517/1, the Winton Program for the Physics of Sustainability. LS by the EPSRC Cambridge NanoDTC EP/L015978/1, St. Johns College of the University of Cambridge. JMDT by the Spanish MINECO through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and RED2018-102627-T. JMDT and JPN by the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding, the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund. OVD acknowledges financial support by the DFG under grant No. 374052683 (DO 1511/5-1), the FWF under grant No. I 4889 (CurviMag), and the COST Action CA16218 (NANOCOHYBRI) of the European Cooperation in Science and Technology. MH and OVD acknowledge support through the Frankfurt Center of Electron Microscopy (FCEM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disordered hyperuniformity in superconducting vortex lattices

  • Benito Llorens, José
  • Guillamón, Isabel
  • Serrano, Ismael G.
  • Córdoba, Rosa
  • Sesé Monclús, Javier
  • Teresa, José María de
  • Ibarra, M. Ricardo
  • Vieira, Sebastián
  • Suderow, Hermann
The current carrying capability of type II superconductors under magnetic fields is determined to a large extent by the interaction of superconducting vortices with pinning centers. Vortices are arranged in lattices with varying degrees of disorder depending on the balance between the intervortex interactions and the pinning strength. We analyze here vortex arrangements in disordered vortex lattices of different superconducting systems, single crystals (Co-doped NbSe2, LiFeAs, and CaKFe4⁢As4), and amorphous W-based thin films (with critical temperatures 𝑇𝑐 from 4 K to 35 K and critical fields from 3.4 T to more than 90 T). We calculate for each case the structure factor and number variance and compare to calculations on an interacting set of partially pinned particles. We find that random density fluctuations appear when pinning overcomes interactions and show that the suppression of density fluctuations is correlated to the presence of interactions. We discuss the results within the framework of hyperuniform distributions and find that all studied lattices follow a similar increase of the number variance with the defect density., This work was supported by the Spanish State Agency for Research (Grants No. FIS2017-84330-R, No. MAT2017-82970-C2-1-R, No. MAT2017-82970-C2-2-R, No. RED2018-102627-T, No. RYC-2014-15093, and No. CEX2018-000805-M), the Aragón Regional Government (Construyendo Europa desde Aragón) through Projects No. E28_20R with European Social Fund funding, the Comunidad de Madrid through program NANOMAGCOST-CM (Grant No. S2018/NMT-4321), and EU Program No. CA16218 (Nanocohybri). I.G. acknowledges support from the European Research Council PNICTEYES (Grant Agreement No. 679080). M.O. acknowledges support from Fundación Séneca through Grant No. 19907/GERM/15. We also acknowledge SEGAINVEX at UAM. R.C. acknowledges the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR19/11700008., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Writing 3D Nanomagnets Using Focused Electron Beams

  • Fernandez-Pacheco, A.
  • Skoric, L.
  • De Teresa, J.M.
  • Pablo-Navarro, J.
  • Huth, M.
  • Dobrovolskiy, O.V.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Disordered hyperuniformity in superconducting vortex lattices

  • Llorens, J.B.
  • Guillamon, I.
  • García Serrano, I.
  • Cordoba, R.
  • Sese, J.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vieira, S.
  • Ortuno, M.
  • Suderow, H.
The current carrying capability of type II superconductors under magnetic fields is determined to a large extent by the interaction of superconducting vortices with pinning centers. Vortices are arranged in lattices with varying degrees of disorder depending on the balance between the intervortex interactions and the pinning strength. We analyze here vortex arrangements in disordered vortex lattices of different superconducting systems, single crystals (Co-doped NbSe2, LiFeAs, and CaKFe4As4), and amorphous W- based thin films (with critical temperatures T-c from 4 K to 35 K and critical fields from 3.4 T to more than 90 T). We calculate for each case the structure factor and number variance and compare to calculations on an interacting set of partially pinned particles. We find that random density fluctuations appear when pinning overcomes interactions and show that the suppression of density fluctuations is correlated to the presence of interactions. We discuss the results within the framework of hyperuniform distributions and find that all studied lattices follow a similar increase of the number variance with the defect density.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, M.
  • Pablo-Navarro, J.
  • Berganza, E.
  • Ares, P.
  • Magén, C.
  • Masseboeuf, A.
  • Gatel, C.
  • Snoeck, E.
  • Gómez-Herrero, J.
  • de Teresa, J.M.
  • Asenjo, A.
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoscale direct-write fabrication of superconducting devices for application in quantum technologies

  • De Teresa, José María
In this Perspective article, we evaluate the current state of research on the use of focused electron and ion beams to directly fabricate nanoscale superconducting devices with application in quantum technologies. First, the article introduces the main superconducting devices and their fabrication by means of standard lithography techniques such as optical lithography and electron beam lithography. Then, focused ion beam patterning of superconductors through milling or irradiation is shown, as well as the growth of superconducting devices by means of focused electron and ion beam induced deposition. We suggest that the key benefits of these resist-free direct-growth techniques for quantum technologies include the ability to make electrical nanocontacts and circuit edit, fabrication of high-resolution superconducting resonators, creation of Josephson junctions and superconducting quantum interference device (SQUIDs) for on-tip sensors, patterning of high-Tc SQUIDs and other superconducting circuits, and the exploration of fluxtronics and topological superconductivity.