Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Nanofabrication techniques in large-area molecular electronic devices

  • Herrer, L.
  • Martín, S.
  • Cea, P.
The societal impact of the electronics industry is enormous-not to mention how this industry impinges on the global economy. The foreseen limits of the current technology-technical, economic, and sustainability issues-open the door to the search for successor technologies. In this context, molecular electronics has emerged as a promising candidate that, at least in the short-term, will not likely replace our silicon-based electronics, but improve its performance through a nascent hybrid technology. Such technology will take advantage of both the small dimensions of the molecules and new functionalities resulting from the quantum effects that govern the properties at the molecular scale. An optimization of interface engineering and integration of molecules to form densely integrated individually addressable arrays of molecules are two crucial aspects in the molecular electronics field. These challenges should be met to establish the bridge between organic functional materials and hard electronics required for the incorporation of such hybrid technology in the market. In this review, the most advanced methods for fabricating large-area molecular electronic devices are presented, highlighting their advantages and limitations. Special emphasis is focused on bottom-up methodologies for the fabrication of well-ordered and tightly-packed monolayers onto the bottom electrode, followed by a description of the top-contact deposition methods so far used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparison between focused electron/ion beam-induced deposition at room temperature and under cryogenic conditions

  • De Teresa, J. M.
  • Orús, P.
  • Córdoba, R.
  • Philipp, P.
In this contribution, we compare the performance of Focused Electron Beam-induced Deposition (FEBID) and Focused Ion Beam-induced Deposition (FIBID) at room temperature and under cryogenic conditions (the prefix "Cryo" is used here for cryogenic). Under cryogenic conditions, the precursor material condensates on the substrate, forming a layer that is several nm thick. Its subsequent exposure to a focused electron or ion beam and posterior heating to 50°C reveals the deposit. Due to the extremely low charge dose required, Cryo-FEBID and Cryo-FIBID are found to excel in terms of growth rate, which is typically a few hundred/thousand times higher than room-temperature deposition. Cryo-FIBID using the W(CO)6 precursor has demonstrated the growth of metallic deposits, with resistivity not far from the corresponding deposits grown at room temperature. This paves the way for its application in circuit edit and the fast and direct growth of micro/nano-electrical contacts with decreased ion damage. The last part of the contribution is dedicated to the comparison of these techniques with other charge-based lithography techniques in terms of the charge dose required and process complexity. The comparison indicates that Cryo-FIBID is very competitive and shows great potential for future lithography developments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of pt-c deposits by cryo-fibid: Substantial growth rate increase and quasi-metallic behaviour

  • Salvador-Porroche, A.
  • Sangiao, S.
  • Philipp, P.
  • Cea, P.
  • De Teresa, J.M.
The Focused Ion Beam Induced Deposition (FIBID) under cryogenic conditions (Cryo-FIBID) technique is based on obtaining a condensed layer of precursor molecules by cooling the substrate below the condensation temperature of the gaseous precursor material. This condensed layer is irradiated with ions according to a desired pattern and, subsequently, the substrate is heated above the precursor condensation temperature, revealing the deposits with the shape of the exposed pattern. In this contribution, the fast growth of Pt-C deposits by Cryo-FIBID is demonstrated. Here, we optimize various parameters of the process in order to obtain deposits with the lowest-possible electrical resistivity. Optimized ~30 nm-thick Pt-C deposits are obtained using ion irradiation area dose of 120 µC/cm2 at 30 kV. This finding represents a substantial increment in the growth rate when it is compared with deposits of the same thickness fabricated by standard FIBID at room temperature (40 times enhancement). The value of the electrical resistivity in optimized deposits (~4 × 104 µO cm) is suitable to perform electrical contacts to certain materials. As a proof of concept of the potential applications of this technology, a 100 µm × 100 µm pattern is carried out in only 43 s of ion exposure (area dose of 23 µC/cm2), to be compared with 2.5 h if grown by standard FIBID at room temperature. The ion trajectories and the deposit composition have been simulated using a binary-collision-approximation Monte Carlo code, providing a solid basis for the understanding of the experimental results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low-resistivity Pd nanopatterns created by a direct electron beam irradiation process free of post-treatment steps

  • Salvador-Porroche, Alba
  • Herrer, Lucia
  • Sangiao, Soraya
  • de Teresa, Jose Maria
  • Cea, Pilar
Abstract The ability to create metallic patterned nanostructures with excellent control of size, shape and spatial orientation is of utmost importance in the construction of next-generation electronic and optical devices as well as in other applications such as (bio)sensors, reactive surfaces for catalysis, etc. Moreover, development of simple, rapid and low-cost fabrication processes of metallic patterned nanostructures is a challenging issue for the incorporation of such devices in real market applications. In this contribution, a direct-write method that results in highly conducting palladium-based nanopatterned structures without the need of applying subsequent curing processes is presented. Spin-coated films of palladium acetate were irradiated with an electron beam to produce palladium nanodeposits (PdNDs) with controlled size, shape and height. The use of different electron doses was investigated and its influence on the PdNDs features determined, namely: (1) thickness of the deposits, (2) atomic percentage of palladium content, (3) oxidation state of palladium in the deposit, (4) morphology of the sample and grain size of the Pd nanocrystals and (5) resistivity. It has been probed that the use of high electron doses, 30000 μC·cm-2 results in the lowest resistivity reported to date for PdNDs, namely 145.1 μΩ·cm, which is only one order of magnitude higher than metallic palladium. This result paves the way for development of simplified lithography processes of nanostructured deposits avoiding subsequent post-treatment steps.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

pH control of conductance in a pyrazolyl Langmuir-Blodgett monolayer

  • Herrer, L.
  • Martín, S.
  • González-Orive, A.
  • Milan, D.C.
  • Vezzoli, A.
  • Nichols, R.J.
  • Serrano, J.L.
  • Cea, P.
In this contribution, pyrazole is identified as an excellent anchoring group capable of forming well-ordered Langmuir-Blodgett (LB) monolayers onto gold substrates. In contrast, the formation of self-assembled (SA) monolayers is prevented due to the extraction of gold atoms from the surface upon the incubation process required for the formation of these films. The electronic coupling strength of pyrazole-gold junctions is explored through evaluation of the electrical properties of LB films incorporating a double pyrazole terminated molecular wire, namely 1, 4-bis(1H-pyrazol-4-ylethynyl)benzene, 1; these electrical properties are compared with those of molecules having a similar chemical structure, geometry and length. The conductance value for LB films of1is high when the monolayer is transferred from a Langmuir film prepared onto a basic subphase, 1.19 × 10-4G0, as it is more than four times larger than the conductance of the same compound incorporated on a LB film prepared from a water subphase, 0.27 × 10-4G0. These results are interpreted in terms of the deprotonation of the pyrazole group in a basic media that leads to the formation of the pyrazolate (deprotonated pyrazole) moiety. This results in a more efficient electronic coupling with the gold tip of the scanning tunnelling microscope used for film characterization.