Skip to main content

UNA NUEVA GENERACION DE MATERIALES ELECTROACTIVOS Y BIOREACTORES PARA INGENIERIA DE TEJIDO MUSCULAR

MAT2016-76039-C4-3-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACION BCMATERIALS-BASQUE CENTER FOR MATERIALS, APPLICATIONS AND NANOSTRUCTURES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Cation and Anion Type on the Formation of the Electroactive beta-Phase and Thermal and Dynamic Mechanical Properties of Poly(vinylidene fluoride)/Ionic Liquids Blends

  • Correia, D.M.
  • Costa, C.M.
  • Lizundia, E.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Films based on poly(vinylidene fluoride) (PVDF) blended with ionic liquids (ILs) comprising different cations and anions were developed to investigate the IL influence on the resulting PVDF crystalline phase. Blends with 25 wt % IL content were produced by solvent casting followed by solvent evaporation at 210 degrees C in an air oven. Five different ILs containing the same cation 1-ethyl-3-methylimidazolium [Emim] and five ILs containing the same anion bis(trifluoromethylsulfonyl)imide [TFSI] were selected. The formation of the different phases and the resulting thermal and dynamic mechanical properties were studied by Fourier transform infrared spectroscopy, differential scanning calorimetry, and dynamic mechanical analysis. The incorporation of [Emim]-based ILs successfully directs the PVDF crystallization from the nonpolar alpha-phase toward the electroactive and highly polar beta-phase. On the contrary, blends containing [TFSI] as a common anion yield a mixture of alpha and beta phases. Overall, the induced beta-phase ranges between 14 and 95% depending on the incorporated IL type. Interestingly, 1-ethyl-3-methylimidazolium chloride [Emim] [Cl] is the most effective IL among the studied ones to significantly enhance the beta-phase content, showing also a marked nucleating effect. The results suggest that ions favorably interact with PVDF chains and are located occupying the amorphous interlamellar PVDF regions. Furthermore, the studied ILs act as plasticizers, yielding lower glass-transition temperatures of the amorphous phase and decreasing mechanical storage modulus at room temperature., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/BTM-MAT/28237/2017, PTDC/EEI-SII/5582/2014, and PTDC/FIS-MAC/28157/2017. D.M.C. and C.M.C. also acknowledge the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, respectively. The financial supports from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-(1 and 3)-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK, and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular relaxation and ionic conductivity of ionic liquids confined in a poly(vinylidene fluoride) polymer matrix: Influence of anion and cation type

  • Correia, D.M.
  • Costa, C.M.
  • de Zea Bermudez, V.
  • Esperança, J.M.S.S.
  • Reis, P.M.
  • Andrio Balado, A.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Blends of poly(vinylidene fluoride) (PVDF) and ionic liquids (ILs) with different cations and anions have been prepared by solvent casting. The IL content was the same in all blends of the series. Molecular relaxation and ionic conductivity have been systematically studied by broadband dielectric relaxation spectroscopy (BDS) in wide frequency (0.1 Hz-1 MHz) and temperature ranges (-120 to 150 degrees C) and the results have been analysed in terms of dielectric modulus M*(omega) and conductivity sigma*(omega) formalisms. The main relaxation process (beta-relaxation) of the amorphous phase of the blend that integrates amorphous polymer chain segments and IL molecules was observed. Significant differences in the Vogel-Fulcher-Tammann (VFT) fitting parameters in the PVDF/IL blends with different anions were detected. The conductivity sigma*(omega) formalism shows that it is strongly dependent on the miscibility of the IL with the amorphous PVDF chains and the type of anion. The Barton-Namikawa-Nakajima (BNN) relation sigma(0) similar to omega(c) is fulfilled for all PVDF/IL blends except for that containing 1-ethyl-3-methylimidazolium hydrogen sulfate, [Emim][HSO4]. The activation energy of the ac conductivity, calculated according to the Dyre model, decreases for all PVDF/IL blends with respect to neat PVDF. The structure of the cation of the IL has been found to exert less influence on the dielectric and conductivity properties of the blends., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2013 and the Associated Laboratory Research Unit for Green Chemistry, Technologies and Clean Processes, LAQV (financed by national funds from FCT/MEC, UID/QUI/50006/2013 and ERDF under the PT2020, POCI-01-0145-FEDER-007265). The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/CTM-ENE/5387/2014, PTDC/EEI-SII/5582/2014 and PTDC/FIS-MAC/28157/2017. D.M.C., C.M.C., J.M.S center dot S.E. and P.M.R. also thank to the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, and Investigator FCT contracts IF/00355/2012 and IF/0621/2015, respectively. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-(1 and 3)-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Freeze-extraction microporous electroactive supports for cell culture

  • Morales-Román, Rosa María
  • Guillot-Ferriols, María Teresa
  • Roig-Pérez, L.
  • Lanceros-Méndez, S.
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(vinylidene fluoride) (PVDF) is a semicrystalline polymer with four crystalline phases, of which the all trans conformation (beta-phase) is the one with the largest piezoelectric response and best electroactive properties. This smart material is able to reproduce physiological events such as inherent bone piezoelectricity, making it a perfect candidate to drive the osteogenic differentiation of mesenchymal stem cells (MSCs) towards the osteogenic lineage. The influence of topography on the adhesion, proliferation and maintenance of multipotency of this type of cell is well established and has confirmed that the production of variable porosity substrates is a suitable approach for cell therapy. In this work, novel PVDF microporous membranes in the beta-phase were developed by the freeze-extraction technique. Several concentrations of PVDF in N,N-dimethylformamide (10, 15 and 20% w/v) were used to obtain membranes with different grades of porosity in the range of 80-84%. The cell culture supports thus produced were found to possess good crystallinity (66%), beta-phase presence (94%) and a microstructure based on spherulite agglomerations with a diameter of spherulite in the order of 1 mu m that is higher as the polymer concentration increases. The membranes have good mechanical properties and the storage modulus, with values between 5 and 47 MPa, rises with the polymer content of the starting solution. Porcine bone marrow mesenchymal stem cells (pBM-MSCs) were used to study cell adhesion and proliferation. Regarding cell adhesion at 24 h, the cells preferred the more porous structures and had round focal adhesions with well-developed cytoskeletons, while they had a round morphology on the less porous membranes. The cells preferred the less porous membranes to proliferate, even though the initial morphology at 24 h showed poor adhesion. These findings confirm that the controlled microporosity of beta-phase PVDF membranes can be produced by freeze extraction and offer the possibility of modifying the adhesion and proliferation of pBM-MSCs on these substrates., This work was supported by the Spanish Government through Projects MAT2016-76039-C4-1-R and MAT2016-76039-C4-3-R (including FEDER funds). Maria Guillot-Ferriols acknowledges the government funding of her doctoral thesis through a BES-2017-080398FPI Grant. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solid polymer electrolytes based on lithium bis(trifluoromethanesulfonyl)imide/poly(vinylidene fluoride -co-hexafluoropropylene) for safer rechargeable lithium-ion batteries

  • Gonçalves, R.
  • Miranda, D.
  • Almeida, A. M.
  • Silva, M. M.
  • Lanceros-Méndez, S.
  • Costa, C. M.
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The increasing use of electronic portable systems and the consequent energy demand, leads to the need to improve energy storage systems. According to that and due to safety issues, high-performance non-flammable electrolytes and solid polymer electrolytes (SPE) are needed. SPE containing different amounts of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) into a poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP, polymer matrix have been prepared by solvent casting. The addition of LiTFSI into PVDF-HFP allows to tailor thermal, mechanical and electrical properties of the composite. In particular, the ionic conductivity of the composites increases with LiTFSI content, the best ionic conductivities of 0.0011 mS/cmat 25 degrees C and 0.23 mS/cmat 90 degrees C were obtained for the PVDF-HFP/LiTFSI composites with 80 wt % of LiTFSI. This solid electrolyte allows the fabrication of Li metallic/SPE/C-LiFePO4 half-cells with a discharge capacity of 51.2 mAh/ g at C/20. Further, theoretical simulations show that the discharge capacity value depends on the lithium concentration and percentage of free ions and is independent of the solid polymer electrolyte thickness. On the other hand, the voltage plateau depends on the SPE thickness. Thus, a solid electrolyte is presented for the next generation of safer solid-state batteries., The authors thank the FCT (Fundacao para a Ciencia e Tecnologia) for financial support under the framework of Strategic Funding grants UID/FIS/04650/2013, UID/EEA/04436/2013 and UID/QUI/0686/2016; and project no. PTDC/FIS-MAC/28157/2017. The authors also thank the FCT for financial support under grant SFRH/BPD/112547/2015 (C.M.C.). Financial support from the Basque Government Industry Department under the ELKARTEK and HAZITEK programs is also acknowledged. JMMD and JLGR acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1 and 3-R (including the FEDER financial support) CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance fromthe European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Broadband dielectric response of silk Fibroin/BaTiO3 composites: Influence of nanoparticle size and concentration

  • Costa, C.M.
  • Reizabal, A.
  • Andrio Balado, A.
  • Pérez-Álvarez, L.
  • Vilas-Vilela, J.L.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In order to advance towards more sustainable electronics generation, natural polymers with tailored dielectric response are essential. In this search, the combination of bio-based materials with active fillers in composite form, suppose one of the most viable alternatives. To achieve it, this work has explored the ability to control dielectric response of Silk Fibroin, a protein polymer by its combination with ceramic barium titanate (BaTiO3) nanoparticles. Both the effect of filler concentration (0, 5, 10, 20 and 40 wt%) and size (100 and 200 nm) has been studied in composites processed by easily scalable techniques. Samples with a homogeneous distribution of nanoparticles have been obtained. Dielectric relaxation processes assessed by broadband dielectric relaxation spectroscopy (BDS) in wide frequency (0.1 Hz-1 MHz) and temperature ranges (- 40 to 220 degrees C), revealed a dielectric constant increasing with filler content and decreasing with filler size, ranging from 4.4 for SF up to 142 for the SF/BaTiO3 composite with 40 wt %, at room temperature and 1 kHz. Two relaxations processes are observed, the beta-relaxation and the conductivity relaxation, both with temperature-dependent behaviour. The activation energy of the conductivity process decreases with increasing nanoparticle content and decreasing size. A Maxwell-Wagner-Sillar process related to the interface between the silk fibroin matrix and the BaTiO3 nanoparticles was also identified., The authors thank the FCT (Fundacao para a Ciencia e Tecnologia) for financial support under the framework of Strategic Funding grants UID/FIS/04650/2019, and UID/EEA/04436/2019; and project PTDC/FIS-MAC/28157/2017. The author also thanks the FCT for financial support under grant SFRH/BPD/112547/2015 and Investigator FCT Contract 2020.04028.CEECIND (C.M.C.) as well POCH and European Union. Financial support from the Spanish Ministry of Science and Innovation (MCINN, Agencia Estatal de Investigacion) through the project RTI2018-097862-B-C21 and MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Morphology, Crystallinity, and Molecular Weight of Poly(E-caprolactone)/Graphene Oxide Hybrids

  • Castilla Cortázar, María Isabel Cecilia
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Marí, B.|||0000-0003-0001-419X
  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
[EN] A study was carried out to determine the effects of graphene oxide (GO) filler on the properties of poly(epsilon-caprolactone) (PCL) films. A series of nanocomposites were prepared, incorporating different graphene oxide filler contents (0.1, 0.2, and 0.5 wt%) by the solution mixing method, and an in-depth study was made of the morphological changes, crystallization, infrared absorbance, molecular weight, thermal properties, and biocompatibility as a function of GO content to determine their suitability for use in biomedical applications. The infrared absorbance showed the existence of intermolecular hydrogen bonds between the PCL's carbonyl groups and the GO's hydrogen-donating groups, which is in line with the apparent reduction in molecular weight at higher GO contents, indicated by the results of the gel permeation chromatography (GPC), and the thermal property analysis. Polarized optical microscopy (POM) showed that GO acts as a nucleating point for PCL crystals, increasing crystallinity and crystallization temperature. The biological properties of the composites studied indicate that adding only 0.1 wt% of GO can improve cellular viability and that the composite shows promise for use in biomedical applications., This work was supported by Projects GV/2016/067 of the Generalitat Valenciana and MAT2016-76039-C4-3-R of the Spanish Ministry of Economy and Competitiveness (MINECO). The authors are grateful to M. Monleon-Pradas for his helpful comments and G. Vilarino-Feltrer for his valuable advice on the cell culture experiments. A. Vidaurre would also like to express her gratitude for the support received from CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. SEM, TEM and AFM were conducted by the authors at the Microscopy Service of the Universitat Politecnica de Valencia, whose advice is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crystallization kinetics of poly(ethylene oxide) confined in semicrystalline poly(vinylidene) fluoride

  • Tamaño-Machiavello, María Noel
  • Costa, C.M.
  • Romero Colomer, Francisco José
  • Lanceros-Méndez, S.
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Polymer blends based on poly(vinylidene fluoride) (PVDF) and poly(ethylene oxide) (PEO) have been prepared to analyze the crystallization kinetics of poly(ethylene oxide) confined in semicrystalline PVDF with different ratios of both polymers. Both blend components were dissolved in a common solvent, dimethyl formamide. Blend films were obtained by casting from the solution at 70 degrees C. Thus, PVDF crystals are formed by crystallization from the solution while PEO (which is in the liquid state during the whole process) is confined between PVDF crystallites. The kinetics of crystallization of the confined PEO phase was studied by isothermal and nonisothermal experiments. Fitting of Avrami model to the experimental DSC traces allows a quantitative comparison of the influence of the PVDF/PEO ratio in the blend on the crystallization behavior. The effect of melting and further recrystallization of the PVDF matrix on PEO confinement is also studied. (c) 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 588-597
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photocatalytic and antimicrobial multifunctional nanocomposite membranes for emerging pollutants water treatment applications

  • Salazar, H.
  • Martins, Pedro
  • Santos, Bruno
  • Fernandes, M. M.
  • Reizabal, Ander
  • Sebastián, Víctor
  • Botelho, Gabriela
  • Tavares, Carlos J.
  • Vilas-Vilela, José L.
  • Lanceros-Méndez, Senentxu
Emerging pollutants represent a new global problem for water quality. As these compounds get into the environment, they cause severe threats to aquatic environments and human health and are typically resistant to conventional wastewater treatments. In this work, TiO2 nanoparticles surface was functionalized with silver (Ag) nanoparticles, and solvent cast and electrospun membranes of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) were prepared with different concentrations of TiO2 and Ag–TiO2 to produce a multifunctional material. The photocatalytic activity of the nanocomposites was evaluated through the degradation of norfloxacin under ultraviolet (UV) and visible radiation. It is shown that nanocomposites with Ag–TiO2 show the highest degradation efficiencies: 64.2% under UV and 80.7% under visible radiation, for 90 and 300 min, respectively. Furthermore, the recyclability of the membranes has also been demonstrated. Finally, it is shown the antimicrobial activity of the nanocomposite membranes, demonstrating the suitability of the Ag–TiO2/PVDF-HFP nanocomposites as multifunctional photocatalytic and antimicrobial membranes for water remediation applications., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Projects PEST-C/FIS/UI607/2019 and PEST-C/QUI/UIO686/2019 and projects PTDC/BTM-MAT/28237/2017; PTDC/EMD-EMD/28159/2017 and PTDC/FIS-MAC/28157/2017. H. Salazar thanks the FCT for grants SFRH/BD/122373/2016. M. M. Fernandes thanks the FCT grant SFRH/BPD/121464/2016. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT 2016-76039-C4-3-R (AEI/FEDER, UE) (including FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capture and separation of L-histidine through optimized zinc-decorated magnetic silica spheres

  • Cardoso, Vanessa F.
  • Sebastián, Víctor
  • Silva, Carlos J. R.
  • Botelho, Gabriela
  • Lanceros-Méndez, Senentxu
Zinc-decorated magnetic silica spheres were developed, optimized and tested for the capture and separation of l-histidine. The magnetic silica spheres were prepared using a simple sol-gel method and show excellent magnetic characteristics, adsorption capacity toward metal ions, and stability in aqueous solution in a wide pH range. The binding capacity of zinc-decorated magnetic silica spheres to histidine proved to be strongly influenced by the morphology, composition and concentration of metal at the surface of the magnetic silica spheres and therefore these parameters should be carefully controlled in order to maximize the performance for protein purification purposes. Optimized zinc-decorated magnetic silica spheres demonstrate a binding capacity to l-histidine of approximately 44mgg-1 at the optimum binding pH buffer., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the strategic projects UID/EEA/04436/2013 and UID/FIS/04650/2013, by FEDER funds through the COMPETE 2020–Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941 and by the project EuroNanoMed 2016 call, Project LungChek ENMed/0049/2016. V.F.C. thanks the FCT for the SFRH/BPD/98109/2013 grant. VS acknowledge the financial support from the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642). This work was also supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and the Basque Government Industry Department under the ELKARTEK Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced photocatalytic activity of au/TiO2 nanoparticles against ciprofloxacin

  • Martins, Pedro
  • Sebastián, Víctor
  • Lanceros-Méndez, Senentxu
This article belongs to the Special Issue Materials and Processes for Photocatalytic and (Photo) Electrocatalytic Removal of Bio-Refractory Pollutants and Emerging Contaminants from Waters.-- et al., In the last decades, photocatalysis has arisen as a solution to degrade emerging pollutants such as antibiotics. However, the reduced photoactivation of TiO2 under visible radiation constitutes a major drawback because 95% of sunlight radiation is not being used in this process. Thus, it is critical to modify TiO2 nanoparticles to improve the ability to absorb visible radiation from sunlight. This work reports on the synthesis of TiO2 nanoparticles decorated with gold (Au) nanoparticles by deposition-precipitation method for enhanced photocatalytic activity. The produced nanocomposites absorb 40% to 55% more radiation in the visible range than pristine TiO2, the best results being obtained for the synthesis performed at 25 °C and with Au loading of 0.05 to 0.1 wt. %. Experimental tests yielded a higher photocatalytic degradation of 91% and 49% of ciprofloxacin (5 mg/L) under UV and visible radiation, correspondingly. Computational modeling supports the experimental results, showing the ability of Au to bind TiO2 anatase surfaces, the relevant role of Au transferring electrons, and the high affinity of ciprofloxacin to both Au and TiO2 surfaces. Hence, the present work represents a reliable approach to produce efficient photocatalytic materials and an overall contribution in the development of high-performance Au/TiO2 photocatalytic nanostructures through the optimization of the synthesis parameters, photocatalytic conditions, and computational modeling., The authors acknowledge funding from the Basque Government Industry Department under the ELKARTEK Program and the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). This work was also supported by the Graduate Academy of the Technische Universität Dresden. Centro de Investigacion Biomédica en Red – Bioengenharía, Biomateriales e Nanomedicina (CIBER-BBN) is an initiative funded by the 6th National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, and CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced photocatalytic activity of au/TiO2 nanoparticles against ciprofloxacin

  • Martins, P.
  • Kappert, S.
  • Le, H.N.
  • Sebastian, V.
  • Kühn, K.
  • Alves, M.
  • Pereira, L.
  • Cuniberti, G.
  • Melle-Franco, M.
  • Lanceros-Méndez, S.
In the last decades, photocatalysis has arisen as a solution to degrade emerging pollutants such as antibiotics. However, the reduced photoactivation of TiO2 under visible radiation constitutes a major drawback because 95% of sunlight radiation is not being used in this process. Thus, it is critical to modify TiO2 nanoparticles to improve the ability to absorb visible radiation from sunlight. This work reports on the synthesis of TiO2 nanoparticles decorated with gold (Au) nanoparticles by deposition-precipitation method for enhanced photocatalytic activity. The produced nanocomposites absorb 40% to 55% more radiation in the visible range than pristine TiO2, the best results being obtained for the synthesis performed at 25¿C and with Au loading of 0.05 to 0.1 wt. %. Experimental tests yielded a higher photocatalytic degradation of 91% and 49% of ciprofloxacin (5 mg/L) under UV and visible radiation, correspondingly. Computational modeling supports the experimental results, showing the ability of Au to bind TiO2 anatase surfaces, the relevant role of Au transferring electrons, and the high affinity of ciprofloxacin to both Au and TiO2 surfaces. Hence, the present work represents a reliable approach to produce efficient photocatalytic materials and an overall contribution in the development of high-performance Au/TiO2 photocatalytic nanostructures through the optimization of the synthesis parameters, photocatalytic conditions, and computational modeling.