Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric Generator-Powered Long-Range Wireless Real-Time Steam Leak Detection in Steam Traps

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Ferrer, Carles|||0000-0002-1475-8790
This paper introduces a novel thermoelectric generator (TEG)-powered Industrial Internet of Things (IIoT) device that addresses key limitations in the detection of steam leaks in industrial steam pipelines, particularly in steam traps. Existing solutions often rely on battery-powered or wired sensors, which are limited by high maintenance costs, short lifespans, or significant infrastructure investments. The proposed device operates without batteries, using waste heat to provide continuous power, and leverages LoRaWAN for long-range wireless communication, minimizing reliance on costly internal infrastructure. Additionally, the device integrates temperature differential (ΔT) and ultrasonic sensors with edge computing capabilities to enhance real-time leak detection and reduce dependency on cloud computing. By enabling precise, low-maintenance monitoring of steam systems in energy-intensive industries (e.g., petrochemical, pharmaceutical), this technology can significantly reduce energy losses, operational costs, and greenhouse gas emissions. Initial testing demonstrates the device's ability to detect leaks accurately under varying industrial conditions, offering a robust, scalable solution for Industry 4.0 applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analog control of La0.5Sr0.5FeO3-δ electrical properties through oxygen deficiency induced magnetic transition

  • Nizet, Paul
  • Chiabrera, Francesco Maria|||0000-0001-8940-2708
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Alayo Bueno, Nerea|||0000-0002-0414-9246
  • Langner, Philipp|||0000-0003-1305-7826
  • Valencia, Sergio|||0000-0002-3912-5797
  • Fraile Rodríguez, Arantxa|||0000-0003-2722-0882
  • Baiutti, Federico|||0000-0001-9664-2486
  • Smekhova, Alevtina|||0000-0003-0946-2909
  • Morata, Alex|||0000-0002-3300-4636
  • Sort, Jordi|||0000-0003-1213-3639
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
Switchability of materials properties by applying controlled stimuli such as voltage pulses is an emerging field of study with applicability in adaptive and programmable devices like neuromorphic transistors or non-emissive smart displays. One of the most exciting approaches to modulate materials performance is mobile ion/vacancy insertion for inducing changes in relevant electrical, optical, or magnetic properties, among others. Unveiling the interplay between changes in the concentration of mobile defects (like oxygen vacancies) and functional properties in relevant materials represents a step forward for underpinning the emerging oxide iontronics discipline. In this work, electrochemical oxide-ion solid-state pumping cells were fabricated for analog control of the oxygen stoichiometry in thin films of mixed ionic-electronic conductor La0.5Sr0.5FeO3-δ. We demonstrate over more than four orders of magnitude electronic conductivity control at 50 °C within the same crystallographic phase through precise and continuous voltage control of the oxygen stoichiometry. We show that behind the modification of the transport properties of the material lays a paramagnetic-to-antiferromagnetic transition. We exploit such magnetoelectric coupling to show control over the exchange interaction between La0.5Sr0.5FeO3-δ and a ferromagnetic Co layer deposited on top.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A high-entropy manganite in an ordered nanocomposite for long-term application in solid oxide cells

  • Baiutti, Federico
  • Chiabrera, Francesco
  • Acosta, M.
  • Diercks, D.
  • Parfitt, D.
  • Santiso, José
  • Wang, Xiang
  • Cavallaro, Andrea
  • Morata, Alex
  • Wang, Haiyan
  • Chroneos, A.
  • MacManus-Driscoll, J. L.
  • Tarancón, Albert
The implementation of nano-engineered composite oxides opens up the way towards the development of a novel class of functional materials with enhanced electrochemical properties. Here we report on the realization of vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria with straight applicability as functional layers in high-temperature energy conversion devices. By a detailed analysis using complementary state-of-the-art techniques, which include atom-probe tomography combined with oxygen isotopic exchange, we assess the local structural and electrochemical functionalities and we allow direct observation of local fast oxygen diffusion pathways. The resulting ordered mesostructure, which is characterized by a coherent, dense array of vertical interfaces, shows high electrochemically activity and suppressed dopant segregation. The latter is ascribed to spontaneous cationic intermixing enabling lattice stabilization, according to density functional theory calculations. This work highlights the relevance of local disorder and long-range arrangements for functional oxides nano-engineering and introduces an advanced method for the local analysis of mass transport phenomena., J.S. acknowledges the support of ICN2 (funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme SEV-2017-0706) for the XRD measurements. M.A. acknowledges the support from the Feodor Lynen Research Fellowship Program of the Alexander von Humboldt Foundation and the Isaac Newton Trust, 17.25(a). M.A. and J.D. acknowledge the support from the EPSRC Centre of Advanced Materials for Integrated Energy Systems (CAM-IES) under EP/P007767/1. J.D. also acknowledge support from EPSRC grants EP/N004272/1, EP/T012218/1, the Royal Academy of Engineering- CIET1819_24, ERC POC grant 779444, Portapower. X.W. and H.W. acknowledge the funding support from the U.S. National Science Foundation for the TEM effort at Purdue University (DMR-1565822 and DMR-2016453). This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 824072 (HARVESTORE), No 681146 (ULTRASOFC) and No 101017709 (EPISTORE) and was supported by an STSM Grant from the COST Action MP1308: Towards Oxide-Based Electronics (TO-BE), supported by COST (European Cooperation in Science and Technology).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller, Valerie
  • Morata, Alex
  • Nuñez Eroles, Marc
  • Arenal, Raúl
  • Gonzalez-Rosillo, Juan Carlos
  • López del Amo, Juan Miguel
  • Tarancón, Albert
This article is part of the themed collection: Recent Open Access Articles., The NASICON superionic solid electrolyte Li1+xAlxTi2−x(PO4)3 (LATP) with 0.3 ≤ x ≤ 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 μm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 μS cm−1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm−1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 824072 (HARVESTORE), from the European Regional Development Fund under the FEDER Catalonia Operative Programme 2014-2020 (FEM-IoT, 001-P-00166) and the “Generalitat de Catalunya” (2017 SGR 1421, NANOEN). FIB, HRSTEM, EDS and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-I00 as well as from the European Union H2020 program “ESTEEM3” (823717). J. C. G.-R., acknowledges the financial support provided by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 801342 (Tecniospring INDUSTRY), as well as by the Agency for Business Competitiveness of the Government of Catalonia. NMR measurements were supported and carried out at the Centre for Cooperative Research on Alternative Energies (CIC energiGUNE) as a member of the Basque Research and Technology Alliance (BRTA). Suitable Si3N4 substrates and microelectrodes have been provided by the Institute of Microelectronics of Barcelona IMB-CNM. Pt-covered Si substrates have been fabricated by the Interuniversity Microelectronics Centre (imec) in Leuven, Belgium. GI-XRD measurements have been collected at the Scientific and Technological Center (CCiT) at the University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored nano-columnar La2NiO4cathodes for improved electrode performance

  • Stangl, Alexander
  • Riaz, Adeel
  • Rapenne, Laetitia
  • Caicedo, José Manuel
  • Sirvent, J.
  • Baiutti, Federico
  • Jiménez, Carmen
  • Tarancón, Albert
  • Mermoux, Michel
  • Burriel, Mónica
La2NiO4 is a very promising cathode material for intermediate and low temperature solid oxide cell applications, due to its good electronic and ionic conductivity, together with its high oxygen exchange activity with a low activation energy. Oxygen incorporation and transport in La2NiO4 (L2NO4) thin films are limited by surface reactions. Hence, tailoring the morphology is expected to lead to an overall improvement of the electrode performance. We report the growth of nano-architectured La2NiO4 thin film electrodes by Pulsed Injection Metal Organic Chemical Vapour Deposition (PI-MOCVD), achieving vertically gapped columns with a multi-fold active surface area, leading to much faster oxygen exchange. This nano-columnar structure is rooted in a dense bottom layer serving as a good electronic and ionic conduction pathway. The microstructure is tuned by modification of the growth temperature and characterised by SEM, TEM and XRD. We studied the effect of surface activity by electrical conductivity relaxation measurements in fully dense and nano-columnar La2NiO4 thin films of various thicknesses grown on several different single crystal substrates. Our results demonstrate that the increased surface area, in combination with the opening of different surface terminations, leads to a significant enhancement of the total exchange activity in our films with an optimized nano-architectured microstructure. This journal is, This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 824072 (Harvestore) and under the Marie Skłodowska-Curie grant agreement no. 840787 (Thin-CATALYzER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the thermoelectric properties of Nb-doped SrTiO3epitaxial thin films

  • Chatterjee, Arindom
  • Lan, Zhenyun
  • Valbjørn Christensen, Dennis
  • Bauitti, Federico
  • Morata, Alex
  • Chávez-Angel, Emigdio
  • Sanna, Simone
  • Castelli, Ivano E.
  • Chen, Yunzhong
  • Tarancón, Albert
  • Pryds, Nini
The exploration for thermoelectric thin films of complex oxides such as SrTiO3-based oxides is driven by the need for miniaturized harvesting devices for powering the Internet of Things (IoT). However, there is still not a clear consensus in the literature for the underlying influence of film thickness on thermoelectric properties. Here, we report the fabrication of epitaxial thin films of 6% Nb-doped SrTiO3 on (001) (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) single crystal using pulsed laser deposition (PLD) where the film thickness was varied from 2 nm to 68 nm. The thickness dependence shows a subtle increase of tetragonality of the thin film lattice and a gradual drop of the electrical conductivity, the density of charge carriers, and the thermoelectric Seebeck coefficient as the film thickness decreases. DFT-based calculations show that ∼2.8% increase in tetragonality results in an increased splitting between t2g and eg orbitals to ∼42.3 meV. However, experimentally observed tetragonality for films between 68 to 13 nm is only 0.06%. Hence, the effect of thickness on tetragonality is neglected. We have discussed the decrease of conductivity and the Seebeck coefficient based on the decrease of carriers and change in the scattering mechanism, respectively., The research leading to these results has received funding from the European Union's H2020 Programme under Grant Agreement no 824072 – HARVESTORE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, Valerie
  • Gonzalez-Rosillo, Juan Carlos
  • Nuñez Eroles, Marc
  • Stchakovsky, Michel
  • Arenal, Raúl
  • Morata, Alex
  • Tarancón, Albert
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 824072 (HARVESTORE), the European Regional Development Fund under the FEDER Catalonia Operative Programme 2014–2020 (FEM-IoT, 001-P-00166), and the “Generalitat de Catalunya” (2017 SGR 1421, NANOEN). FIB, STEM, and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish MICINN through project grant PID2019-104739 GB-100/AEI/10.13039/501100011033, from the Government of Aragon (project DGA E13-20R) and European Union H2020 program “ESTEEM3" (823717). J. C. G.- R., acknowledges the financial support provided by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 801342 (Tecniospring INDUSTRY), as well as by the Agency for Business Competitiveness of the Government of Catalonia. Spectroscopic Ellipsometry measurements and models have been developed in collaboration with HORIBA France SAS. Suitable Pt-covered Si substrates have been provided by the Institute of Microelectronics of Barcelona IMB-CNM. GI-XRD measurements have been collected at the Scientific and Technological Center (CCiT) at the University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés, Raúl
  • Malet, Roger
  • Oliver, Joan
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc
  • Fonseca, Luis
  • Rodríguez-Iglesias, Alex
  • Tarancón Rubio, Albert
  • Morata, Alex
  • Baiutti, Federico
  • Ferrer, Carles
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current batteryoperated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating lightedge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU’s strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET), This investigation was supported by the European Commission H2020 FET Proactive Harvestore Project under grant 824072. This investigation was supported by the European Commission H2020 EIC Pilot Project InduEye 2.0 under grant 946845. This investigation was supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project FEM-IoT (001-P-001662). This work acknowledges the financial support from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497 & 2021 SGR 10623). This research was also supported by the Spanish National Research Agency (AEI) through the project PID2019-110142RBC21 (AEI/FEDER, EU) THERMOLOGICS. This research used the Spanish ICTS Network MICRONANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project FICTS2019-02-40. This research was also supported by the Spanish National Research Agency (AEI) through the project PID2020-116890RB-I00 (AEI/FEDER, EU) WISE. Support through the Maria de Maeztu grant CEX2023- 001397-M, funded by MICIU/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High performance La2NiO4+δ oxygen and Ni–Ce0.9Gd0.1O2−δ fuel electrodes for thin film reversible solid oxide cells

  • Riaz, Adeel
  • Sirvent, Juande
  • Zueco-Vincelle, Juan
  • Buzi, Fjorelo
  • Panisset, Silvère
  • Stangl, Alexander
  • Rapenne, Laetitia
  • Baiutti, Federico
  • Mermoux, Michel
  • Laguna-Bercero, M. A.
  • Tarancón, Albert
  • Burriel, Mónica
Thin film reversible solid oxide cells (TF-rSOCs) are attracting a great deal of interest as they promise to operate at much lower temperatures (400–600 °C) than state-of-the-art commercial fuel electrode-supported cells (600–800 °C). However, in all-ceramics TF-rSOCs the high polarization resistance of the electrodes limits the cell performance. To overcome this limitation, high performing oxygen and fuel electrodes were selected and their nanostructure was optimized. Thin nanoporous films of La2NiO4+δ were deposited as oxygen electrode by Pulsed Injection Metal Organic Chemical Vapor Deposition (PI-MOCVD) with different thickness. As for the fuel electrode, thin films of Ni–Ce0.9Gd0.1O2−δ (NiCGO) were deposited by Pulsed Laser Deposition (PLD) at various temperatures and pO2. The electrochemical activity of the oxygen and fuel electrodes was measured by Electrical Conductivity Relaxation (ECR) and Electrochemical Impedance Spectroscopy (EIS), respectively. The optimized electrodes were then deposited on a YSZ single crystal electrolyte and the cell was measured in fuel cell and electrolysis modes showing high performance with a power density of 70 mW cm−2 at 0.7 V and a current density of −44 mA cm−2 at 1.3 V at a low operating temperature of 600 °C. These results demonstrate the potential of using these materials as electrodes in TF-rSOCs., This project has received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreements no. 824072 (Harvestore project) and no. 101017709 (EPISTORE project) and by the Centre of Excellence of Multifunctional Architectured Materials ‘CEMAM’ no. ANR-10-LABX-44-01 as part of the ‘Investments for the Future’ Program. This research has benefited from characterization equipment of the Grenoble INP – CMTC platform. The authors also acknowledge support from the Generalitat de Catalunya (2021-SGR-00750, NANOEN). This research has also received funding from PID2022-137626OB-C31 (MCIU/AEI/FEDER, UE), NextGenerationEU (PRTR-C17.I1) and T02_23R (DGA) grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novel approach to micro-fabricated thermoelectric generators with SrTiO3

  • Santander, Joaquin
  • Martín Fernández, Íñigo
  • Carbonell, Carlos
  • Rodríguez-Iglesias, Alex
  • Fuentes Rodríguez, Laura
  • Fernández-Regúlez, Marta
  • Abad Muñoz, Llibertat
  • Lopeandía, Aitor
  • Chatterjee, Arindom
  • Pryds, Nini
  • Fonseca, Luis
  • Salleras Freixes, Marc
The growing demand for autonomous, sustainable, and delocalized power sources for low-power-consuming electronic devices is driving a significant research effort on energy harvesting technologies. Among these, micro-thermoelectric generators (µTEGs) emerge as an appealing solution because of the abundance of residual latent heat sources. This paper proposes an approach to combine high-performance thermoelectric oxides with Si-based µTEGs, leveraging the miniaturization and high-density integration of CMOS-like technologies. The approach is applied to the integration of niobium-doped strontium titanate (Nb:STO) thin films on Si-based planar µTEG structures. The Nb:STO-based µTEG achieves a specific power density Γ = 0.36 nW·cm-2·K-2 under controlled temperature gradients, which is below state-of-the-art performance probably due to lower electrical conductivity from polycrystalline growth. When the chips were tested under realistic operating conditions - placed on a hot surface at 175°C - a maximum power output of p = 0.07 nW was obtained. Nonetheless, by implementing a technological solution for thermal dissipation, the temperature gradient across the thermoelectric material improved by a factor of 110, resulting in a significantly higher extracted power of p = 7.75 nW., The research leading to these results has received funding from the European Union’s H2020 Programme under Grant Agreement no 824072 – HARVESTORE. Also supported by the project ThinTEG (PID2022-142003OB-C22) financed by MCIN/AEI/10.13039/501100011033/FEDER, UE, by the European Social Fund Plus (ESF+) through grants RYC2022-038370-I and RYC2022-037016-I, and by CEX2023-001397-M, financed by MICIU/AEI/10.13039/501100011033. This work acknowledges the financial support from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497). This research has used the Spanish ICTS Network MICRO-NANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project FICTS2019-02–40., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary Information: A novel approach to micro-fabricated thermoelectric generators with SrTiO3

  • Santander, Joaquin
  • Martín Fernández, Íñigo
  • Carbonell, Carlos
  • Rodríguez-Iglesias, Alex
  • Fuentes Rodríguez, Laura
  • Fernández-Regúlez, Marta
  • Abad Muñoz, Llibertat
  • Lopeandía, Aitor
  • Chatterjee, Arindom
  • Pryds, Nini
  • Fonseca, Luis
  • Salleras Freixes, Marc
We present a versatile microfabricated platform to assess thermoelectric performance of diverse thin films, enabling sustainable energy harvesting solutions for IoT and autonomous devices., The growing demand for autonomous, sustainable, and delocalized power sources for low-power-consuming electronic devices is driving a significant research effort on energy harvesting technologies. Among these, micro-thermoelectric generators (µTEGs) emerge as an appealing solution because of the abundance of residual latent heat sources. This paper proposes an approach to combine high-performance thermoelectric oxides with Si-based µTEGs, leveraging the miniaturization and high-density integration of CMOS-like technologies. The approach is applied to the integration of niobium-doped strontium titanate (Nb:STO) thin films on Si-based planar µTEG structures. The Nb:STO-based µTEG achieves a specific power density Γ = 0.36 nW·cm−2·K−2 under controlled temperature gradients, which is below state-of-the-art performance probably due to lower electrical conductivity from polycrystalline growth. When the chips were tested under realistic operating conditions – placed on a hot surface at 175°C – a maximum power output of p = 0.07 nW was obtained. Nonetheless, by implementing a technological solution for thermal dissipation, the temperature gradient across the thermoelectric material improved by a factor of 110, resulting in a significantly higher extracted power of p = 7.75 nW., The work was supported by the Agencia Estatal de Investigación [CEX2023-001397-M]; Agencia Estatal de Investigación [PID2022-142003OB-C22]; Agència de Gestiód’Ajuts Universitaris ide Recerca [2021 SGR 00497]; European Regional Development Fund [FICTS2019-02–40]; European Social Fund Plus [RYC2022-037016-I]; European Social Fund Plus [RYC2022-038370-I]; H2020 Future and Emerging Technologies [824072]., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, V.
  • Gonzalez-Rosillo, J.
  • Nuñez Eroles, M.
  • Stchakovsky, M.
  • Arenal, R.
  • Morata, A.
  • Tarancón, A.
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller V.
  • Morata A.
  • Eroles M.N.
  • Arenal R.
  • Gonzalez-Rosillo J.C.
  • López Del Amo J.M.
  • Tarancón A.
The NASICON superionic solid electrolyte Li1+xAlxTi2-x(PO4)3 (LATP) with 0.3 = x = 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 µm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 µS cm-1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm-1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High performance La2NiO4+δ oxygen and Ni–Ce0.9Gd0.1O2−δ fuel electrodes for thin film reversible solid oxide cells

  • Riaz, Adeel
  • Sirvent, Juande
  • Zueco-Vincelle, Juan
  • Buzi, Fjorelo
  • Panisset, Silvère
  • Stangl, Alexander
  • Rapenne, Laetitia
  • Baiutti, Federico
  • Mermoux, Michel
  • Laguna-Bercero, Miguel Angel
  • Tarancón, Albert
  • Burriel, Mónica
Thin film reversible solid oxide cells (TF-rSOCs) are attracting a great deal of interest as they promise to operate at much lower temperatures (400–600 °C) than state-of-the-art commercial fuel electrode-supported cells (600–800 °C). However, in all-ceramics TF-rSOCs the high polarization resistance of the electrodes limits the cell performance. To overcome this limitation, high performing oxygen and fuel electrodes were selected and their nanostructure was optimized. Thin nanoporous films of La2NiO4+δ were deposited as oxygen electrode by Pulsed Injection Metal Organic Chemical Vapor Deposition (PI-MOCVD) with different thickness. As for the fuel electrode, thin films of Ni–Ce0.9Gd0.1O2−δ (NiCGO) were deposited by Pulsed Laser Deposition (PLD) at various temperatures and pO2. The electrochemical activity of the oxygen and fuel electrodes was measured by Electrical Conductivity Relaxation (ECR) and Electrochemical Impedance Spectroscopy (EIS), respectively. The optimized electrodes were then deposited on a YSZ single crystal electrolyte and the cell was measured in fuel cell and electrolysis modes showing high performance with a power density of 70 mW cm−2 at 0.7 V and a current density of −44 mA cm−2 at 1.3 V at a low operating temperature of 600 °C. These results demonstrate the potential of using these materials as electrodes in TF-rSOCs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A high-entropy manganite in an ordered nanocomposite for long-term application in solid oxide cells

  • Baiutti, Federico|||0000-0001-9664-2486
  • Chiabrera, Francesco Maria|||0000-0001-8940-2708
  • Acosta, Matias|||0000-0001-9504-883X
  • Diercks, David|||0000-0002-5138-0168
  • Parfitt, D.
  • Santiso, José|||0000-0003-4274-2101
  • Wang, X.
  • Cavallaro, Andrea|||0000-0002-6688-1643
  • Morata, Alex|||0000-0002-3300-4636
  • Wang, Haiyan|||0000-0002-7397-1209
  • Chroneos, A.
  • Driscoll, Judith|||0000-0003-4987-6620
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
The implementation of nano-engineered composite oxides opens up the way towards the development of a novel class of functional materials with enhanced electrochemical properties. Here we report on the realization of vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria with straight applicability as functional layers in high-temperature energy conversion devices. By a detailed analysis using complementary state-of-the-art techniques, which include atom-probe tomography combined with oxygen isotopic exchange, we assess the local structural and electrochemical functionalities and we allow direct observation of local fast oxygen diffusion pathways. The resulting ordered mesostructure, which is characterized by a coherent, dense array of vertical interfaces, shows high electrochemically activity and suppressed dopant segregation. The latter is ascribed to spontaneous cationic intermixing enabling lattice stabilization, according to density functional theory calculations. This work highlights the relevance of local disorder and long-range arrangements for functional oxides nano-engineering and introduces an advanced method for the local analysis of mass transport phenomena. Electrode functional layers for solid oxide cells require a combination of high reactivity and thermal stability. Here, the authors present a self-assembled vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria as functional layers for high temperature applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Model and Implementation of a Novel Heat-Powered Battery-Less IIoT Architecture for Predictive Industrial Maintenance

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Malet, Roger|||0000-0002-8408-6045
  • Oliver-Parera, Maria|||0000-0001-7921-4826
  • Ferrer, Carles|||0000-0002-1475-8790
The research and management of Industry 4.0 increasingly relies on accurate real-time quality data to apply efficient algorithms for predictive maintenance. Currently, Low-Power Wide-Area Networks (LPWANs) offer potential advantages in monitoring tasks for predictive maintenance. However, their applicability requires improvements in aspects such as energy consumption, transmission range, data rate and constant quality of service. Commonly used battery-operated IIoT devices have several limitations in their adoption in large facilities or heat-intensive industries (iron and steel, cement, etc.). In these cases, the self-heating nodes together with the appropriate low-power processing platform and industrial sensors are aligned with the requirements and real-time criteria required for industrial monitoring. From an environmental point of view, the carbon footprint associated with human activity leads to a steady rise in global average temperature. Most of the gases emitted into the atmosphere are due to these heat-intensive industries. In fact, much of the energy consumed by industries is dissipated in the form of waste heat. With this scenario, it makes sense to build heat transformation collection systems as guarantors of battery-free self-powered IIoT devices. Thermal energy harvesters work on the physical basis of the Seebeck effect. In this way, this paper gathers the methodology that standardizes the modelling and simulation of waste heat recovery systems for IoT nodes, gathering energy from any hot surface, such as a pipe or chimney. The statistical analysis is carried out with the data obtained from two different IoT architectures showing a good correlation between model simulation and prototype behaviour. Additionally, the selected model will be coupled to a low-power processing platform with LoRaWAN connectivity to demonstrate its effectiveness and self-powering ability in a real industrial environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Malet, Roger|||0000-0002-8408-6045
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc|||0000-0001-8812-8268
  • Fonseca, Luis|||0000-0002-1394-8074
  • Rodríguez Iglesias, Alex|||0000-0001-9055-7424
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
  • Morata, Alex|||0000-0002-3300-4636
  • Baiutti, Federico|||0000-0001-9664-2486
  • Ferrer, Carles|||0000-0002-1475-8790
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current battery-operated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating light-edge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU's strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET).