Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric Generator-Powered Long-Range Wireless Real-Time Steam Leak Detection in Steam Traps

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Ferrer, Carles|||0000-0002-1475-8790
This paper introduces a novel thermoelectric generator (TEG)-powered Industrial Internet of Things (IIoT) device that addresses key limitations in the detection of steam leaks in industrial steam pipelines, particularly in steam traps. Existing solutions often rely on battery-powered or wired sensors, which are limited by high maintenance costs, short lifespans, or significant infrastructure investments. The proposed device operates without batteries, using waste heat to provide continuous power, and leverages LoRaWAN for long-range wireless communication, minimizing reliance on costly internal infrastructure. Additionally, the device integrates temperature differential (ΔT) and ultrasonic sensors with edge computing capabilities to enhance real-time leak detection and reduce dependency on cloud computing. By enabling precise, low-maintenance monitoring of steam systems in energy-intensive industries (e.g., petrochemical, pharmaceutical), this technology can significantly reduce energy losses, operational costs, and greenhouse gas emissions. Initial testing demonstrates the device's ability to detect leaks accurately under varying industrial conditions, offering a robust, scalable solution for Industry 4.0 applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transforming Industrial Maintenance with Thermoelectric Energy Harvesting and NB-IoT, A Case Study in Oil Refinery Applications

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Ferrer, Carles|||0000-0002-1475-8790
Heat-intensive industries (e.g., iron and steel, aluminum, cement) and explosive sectors (e.g., oil and gas, chemical, petrochemical) face challenges in achieving Industry 4.0 goals due to the widespread adoption of industrial Internet of Things (IIoT) technologies. Wireless solutions are favored in large facilities to reduce the costs and complexities of extensive wiring. However, conventional wireless devices powered by lithium batteries have limitations, including reduced lifespan in high-temperature environments and incompatibility with explosive atmospheres, leading to high maintenance costs. This paper presents a novel approach for energy-intensive and explosive industries, which represent over 40% of the gross production revenue (GPR) in several countries. The proposed solution uses residual heat to power ATEX-certified IIoT devices, eliminating the need for batteries and maintenance. These devices are designed for condition monitoring and predictive maintenance of rotating machinery, which is common in industrial settings. The study demonstrates the successful application of this technology, highlighting its potential to reduce costs and improve safety and efficiency in challenging industrial environments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Heat-Powered Batteryless IIoT Architecture with NB-IoT for Predictive Maintenance in the Oil and Gas Industry

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Ferrer, Carles|||0000-0002-1475-8790
The carbon footprint associated with human activity, particularly from energy-intensive industries such as iron and steel, aluminium, cement, oil and gas, and petrochemicals, contributes significantly to global warming. These industries face unique challenges in achieving Industry 4.0 goals due to the widespread adoption of industrial Internet of Things (IIoT) technologies, which require reliable and efficient power solutions. Conventional wireless devices powered by lithium batteries have limitations, including a reduced lifespan in high-temperature environments, incompatibility with explosive atmospheres, and high maintenance costs. This paper proposes a novel approach to address these challenges by leveraging residual heat to power IIoT devices, eliminating the need for batteries and enabling autonomous operation. Based on the Seebeck effect, thermoelectric energy harvesters transduce waste heat from industrial surfaces, such as pipes or chimneys, into sufficient electrical energy to power IoT nodes for applications like the condition monitoring and predictive maintenance of rotating machinery. The methodology presented standardises the modelling and simulation of Waste Heat Recovery Systems (IoT-WHRSs), demonstrating their feasibility through statistical analysis of IoT-WHRS architectures. Furthermore, this technology has been successfully implemented in a petroleum refinery, where it benefits from the NB-IoT standard for long-range, robust, and secure communications, ensuring reliable data transmission in harsh industrial environments. The results highlight the potential of this solution to reduce costs, improve safety, and enhance efficiency in demanding industrial applications, making it a valuable tool for the energy transition.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés, Raúl
  • Malet, Roger
  • Oliver, Joan
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc
  • Fonseca, Luis
  • Rodríguez-Iglesias, Alex
  • Tarancón Rubio, Albert
  • Morata, Alex
  • Baiutti, Federico
  • Ferrer, Carles
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current batteryoperated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating lightedge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU’s strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET), This investigation was supported by the European Commission H2020 FET Proactive Harvestore Project under grant 824072. This investigation was supported by the European Commission H2020 EIC Pilot Project InduEye 2.0 under grant 946845. This investigation was supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project FEM-IoT (001-P-001662). This work acknowledges the financial support from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497 & 2021 SGR 10623). This research was also supported by the Spanish National Research Agency (AEI) through the project PID2019-110142RBC21 (AEI/FEDER, EU) THERMOLOGICS. This research used the Spanish ICTS Network MICRONANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project FICTS2019-02-40. This research was also supported by the Spanish National Research Agency (AEI) through the project PID2020-116890RB-I00 (AEI/FEDER, EU) WISE. Support through the Maria de Maeztu grant CEX2023- 001397-M, funded by MICIU/AEI/10.13039/501100011033, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Model and Implementation of a Novel Heat-Powered Battery-Less IIoT Architecture for Predictive Industrial Maintenance

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Malet, Roger|||0000-0002-8408-6045
  • Oliver-Parera, Maria|||0000-0001-7921-4826
  • Ferrer, Carles|||0000-0002-1475-8790
The research and management of Industry 4.0 increasingly relies on accurate real-time quality data to apply efficient algorithms for predictive maintenance. Currently, Low-Power Wide-Area Networks (LPWANs) offer potential advantages in monitoring tasks for predictive maintenance. However, their applicability requires improvements in aspects such as energy consumption, transmission range, data rate and constant quality of service. Commonly used battery-operated IIoT devices have several limitations in their adoption in large facilities or heat-intensive industries (iron and steel, cement, etc.). In these cases, the self-heating nodes together with the appropriate low-power processing platform and industrial sensors are aligned with the requirements and real-time criteria required for industrial monitoring. From an environmental point of view, the carbon footprint associated with human activity leads to a steady rise in global average temperature. Most of the gases emitted into the atmosphere are due to these heat-intensive industries. In fact, much of the energy consumed by industries is dissipated in the form of waste heat. With this scenario, it makes sense to build heat transformation collection systems as guarantors of battery-free self-powered IIoT devices. Thermal energy harvesters work on the physical basis of the Seebeck effect. In this way, this paper gathers the methodology that standardizes the modelling and simulation of waste heat recovery systems for IoT nodes, gathering energy from any hot surface, such as a pipe or chimney. The statistical analysis is carried out with the data obtained from two different IoT architectures showing a good correlation between model simulation and prototype behaviour. Additionally, the selected model will be coupled to a low-power processing platform with LoRaWAN connectivity to demonstrate its effectiveness and self-powering ability in a real industrial environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Malet, Roger|||0000-0002-8408-6045
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc|||0000-0001-8812-8268
  • Fonseca, Luis|||0000-0002-1394-8074
  • Rodríguez Iglesias, Alex|||0000-0001-9055-7424
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
  • Morata, Alex|||0000-0002-3300-4636
  • Baiutti, Federico|||0000-0001-9664-2486
  • Ferrer, Carles|||0000-0002-1475-8790
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current battery-operated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating light-edge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU's strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET).