Skip to main content

SENSORES DE TEMPERATURA AUTOALIMENTADOS BASADOS EN GENERADORES TERMOELECTRICOS

PID2019-110142RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent advances in silicon-based nanostructures for thermoelectric applications

  • Sojo Gordillo, Jose Manuel
  • Morata, Alex
  • Sierra, Carolina Duque
  • Salleras, Marc
  • Fonseca, Luis
  • Tarancón, Albert
In this work, implementations of silicon-based thermoelectric nanomaterials are reviewed. Approaches ranging from nanostructured bulk - i.e., macroscopic materials presenting nanoscale features - to more complex low-dimensional materials are covered. These implementations take advantage of different phonon scattering mechanisms and eventual modifications of the electronic band-structure for the enhancement of the thermoelectric figure of merit. This work is focused on the recent advances in silicon and silicon-based thermoelectric nanomaterials of the last decade - at both the theoretical and experimental level - with the spotlight on the most recent works. Different nanostructures and their fabrication methods are detailed, while the thermoelectric performances and the feasibility of their integration into functional micro-harvester generators are compared and discussed. This Research Update first covers the advances in nanostructured bulk, such as nanometric-sized polycrystals or defect-induced materials. Subsequently, it reviews low-dimensional materials, namely, thin films and nanowires. Later, other complex structures based on nanoporosity, superlattices, or core-shell schemes are detailed. Finally, it is devoted to present examples of the successful implementation of nanostructured silicon into functional thermoelectric devices., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local Heat Dissipation and Elasticity of Suspended Silicon Nanowires Revealed by Dual Scanning Electron and Thermal Microscopies

  • Sojo-Gordillo, Jose M
  • Gadea-Diez, Gerard
  • Renahy, David
  • Salleras, Marc
  • Duque-Sierra, Carolina
  • Vincent, Pascal
  • Fonseca, Luis
  • Chapuis, Pierre-Olivier
  • Morata, Alex
  • Gomès, Séverine
  • Tarancón, Albert
A novel combined setup, with a scanning thermal microscope (SThM) embedded in a scanning electron microscope (SEM), is used to characterize a suspended silicon rough nanowire (NW), which is epitaxially clamped at both sides and therefore monolithically integrated in a microfabricated device. The rough nature of the NW surface, which prohibits vacuum-SThM due to loose contact for heat dissipation, is circumvented by decorating the NW with periodic platinum dots. Reproducible approaches over these dots, enabled by the live feedback image provided by the SEM, yield a strong improvement in thermal contact resistance and a higher accuracy in its estimation. The results-thermal resistance at the tip-sample contact of 188±3.7K µW-1 and thermal conductivity of the NW of 13.7±1.6W m-1 K-1-are obtained by performing a series of approach curves on the dots. Noteworthy, the technique allows measuring elastic properties at the same time-the moment of inertia of the NW is found to be (6.1±1.0) × 10-30m4-which permits to correlate the respective effects of the rough shell on heat dissipation and on the NW stiffness. The work highlights the capabilities of the dual SThM/SEM instrument, in particular the interest of systematic approach curves with well-positioned and monitored tip motion., This investigation has been supported by the Spanish Ministry of Education through the FPU grant , and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalonia in the project FEM‐IoT (). This research as also been supported by the Spanish National Research Agency (AEi) though the project (AEI/FEDER, EU) . This research has used the Spanish ICTS Network , partially funded by FEDER funds through project . This work has also been supported by the French National Research Agency (ANR) through the projects and the project (LabEx iMUST). The European Commission also supported this investigation through the project (GA 766853) and the project (GA 604668). FPU18/01494 001‐P‐001662 PID2019‐110142RB‐C21 THERMOLOGICS MICRONANOFABS MINATEC‐PLUS‐2 FICTS2019‐02‐40 TIPTOP ANR‐16‐CE09‐0023 ATTSEM ANR‐10‐LABX‐0064 EFINED H2020‐FETOPEN‐2016‐2017 QUANTIHEAT NMP‐2013‐LARGE‐7, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés, Raúl
  • Malet, Roger
  • Oliver, Joan
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc
  • Fonseca, Luis
  • Rodríguez-Iglesias, Alex
  • Tarancón Rubio, Albert
  • Morata, Alex
  • Baiutti, Federico
  • Ferrer, Carles
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current batteryoperated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating lightedge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU’s strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET), This investigation was supported by the European Commission H2020 FET Proactive Harvestore Project under grant 824072. This investigation was supported by the European Commission H2020 EIC Pilot Project InduEye 2.0 under grant 946845. This investigation was supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project FEM-IoT (001-P-001662). This work acknowledges the financial support from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497 & 2021 SGR 10623). This research was also supported by the Spanish National Research Agency (AEI) through the project PID2019-110142RBC21 (AEI/FEDER, EU) THERMOLOGICS. This research used the Spanish ICTS Network MICRONANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project FICTS2019-02-40. This research was also supported by the Spanish National Research Agency (AEI) through the project PID2020-116890RB-I00 (AEI/FEDER, EU) WISE. Support through the Maria de Maeztu grant CEX2023- 001397-M, funded by MICIU/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TEM-compatible microdevice for the complete thermoelectric characterization of epitaxially integrated Si-based nanowires

  • Sojo-Gordillo, Jose M
  • Kaur, Yashpreet
  • Tachikawa, Saeko
  • Alayo, Nerea
  • Salleras, Marc
  • Forrer, Nicolas
  • Fonseca, Luis
  • Morata, Alex
  • Tarancón, Albert
  • Zardo, Ilaria
Nanostructured materials present improved thermoelectric properties due to non-trivial effects at the nanoscale. However, the characterization of individual nanostructures, especially from the thermal point of view, is still an unsolved topic. This work presents the complete structural, morphological, and thermoelectrical evaluation of the selfsame individual bottom-up integrated nanowire employing an innovative micro-machined device compatible with transmission electron microscopy whose fabrication is also discussed. Thanks to a design that arranges the nanostructured samples completely suspended, detailed structural analysis using transmission electron microscopy is enabled. In the same device architecture, electrical collectors and isolated heaters are available at both ends of the trenches for thermoelectrical measurements of the nanowire i.e. thermal and electrical properties simultaneously. This allows the direct measurement of the nanowire power factor. Furthermore, micro-Raman thermometry measurements were performed to evaluate the thermal conductivity of the same suspended silicon nanowire. A thermal profile of the self-heating nanowire could be spatially resolved and used to compute the thermal conductivity. In this work, heavily-doped silicon nanowires were grown on this microdevices yielding a thermal conductivity of 30.8 ± 1.7 W Km-1 and a power factor of 2.8 mW mK-2 at an average nanowire temperature of 400 K. Notably, no thermal contact resistance was observed between the nanowire and the bulk, confirming the epitaxial attachment. The device presented here shows remarkable utility in the challenging thermoelectrical characterization of integrated nanostructures and in the development of multiple devices such as thermoelectric generators., This investigation has been supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project FEM-IoT (001-P-001662). This work acknowledges the financial support from the Agencia de Gesti\u00F3 d\u2019Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497). This research has also been supported by the Spanish National Research Agency (AEI) through the project THERMOLOGICS (AEI/FEDER, EU, PID2019-110142RB-C21). This research has used the Spanish ICTS Network MICRONANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project (FICTS2019-02-40). This project has received funding from the Swiss National Science Foundation grant (Grant No. 189924) HYDRONICS and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement 756365)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Durable Dense Packed All-Silicon Micro-Thermoelectric Generator for IoT Applications

  • Sojo-Gordillo, Jose M.
  • Estrada-Wiese, Denise
  • Rodriguez-Iglesias, Alex
  • Duque-Sierra, Carolina
  • Fernández-Regúlez, Marta
  • Martín Fernández, Íñigo
  • Salleras, Marc
  • Fonseca, Luis
  • Morata, Alex
  • Tarancón, Albert
One of the main challenges of the rising field of the Internet of Things (IoT) is the self-sustainable supply of energy to the sensors. Among the available environmental sources, heat can be harvested by means of thermoelectric devices. This work presents a new generation of densely packaged all-silicon micro-thermoelectric generators (µTEGs) with planar architecture. Optimized boron-doped Si nanowires with 80 ± 30nm in diameter are epitaxially integrated as dense arrays into these generators for an improved performance. A procedure to reliably place a heat sink on top of the devices, enlarging the fraction of external thermal gradient captured by the thermoelectrically active nanowires, is described. These improvements enhance the generated voltage up to eight times with respect to that of a bare µTEG, leading to output powers well within the range of IoT needs (10 – 100 µW cm<sup>−2</sup>). Specifically, the µTEG on top of a heat source above 200°C and under still air convection conditions generates more than 14 µW cm<sup>−2</sup>. When exposed to the same temperatures and to an airflow of 1.3 m s<sup>−1</sup> (equivalent to a light breeze) the power density increases above 150 µW cm<sup>−2</sup>. Moreover, a long-term stability study running the device in load matching conditions for a period of 1000 h does not show degradation below 200°C. Finally, the suitability of connecting the µTEG with the current state of the art DC–DC converters is discussed, showing how eventual transients in real operation conditions can allow the device to reach the required cold start-up voltages. Overall, these results demonstrate the readiness of the presented µTEG as a reliable power source for miniaturized IoT applications., Funding text 1 This investigation was supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project (001\u2010P\u2010001662). This work acknowledges the financial support from the Ag\u00E8ncia de Gesti\u00F3 d'Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497). This research was also supported by the Spanish National Research Agency (AEI) MCIN/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) through grants RYC2022\u2010038370\u2010I and RC2022\u2010037016\u2010I and through the project PID2019\u2010110142RB\u2010C21 (AEI/FEDER, EU) . This research has used the Spanish ICTS Network , partially funded by FEDER funds through project FICTS2019\u201002\u201040. FEM\u2010IoT THERMOLOGICS MICRONANOFABS MINATEC\u2010PLUS\u20102 Funding text 2 The authors acknowledge the work of of Dr. Alex Vogel from the Nano Imaging Lab of the University of Basel, and the support of Prof. Ilaria Zardo at the University of\u00A0Basel. This investigation was supported by the Spanish Ministry of Education through the FPU grant FPU18/01494, and by the University and Research Secretary of the Business and Knowledge Department of the Generalitat de Catalunya in the project FEM-IoT (001-P-001662). This work acknowledges the financial support from the Ag\u00E8ncia de Gesti\u00F3 d'Ajuts Universitaris i de Recerca (AGAUR) of the Generalitat de Catalunya (2021 SGR 00497). This research was also supported by the Spanish National Research Agency (AEI)\u00A0MCIN/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) through grants RYC2022-038370-I and RC2022-037016-I and through the project PID2019-110142RB-C21 (AEI/FEDER, EU) THERMOLOGICS. This research has used the Spanish ICTS Network MICRONANOFABS, partially funded by FEDER funds through MINATEC-PLUS-2 project\u00A0FICTS2019-02-40., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Milliwatt μ-TEG-Powered Vibration Monitoring System for Industrial Predictive Maintenance Applications

  • Aragonés Ortiz, Raúl|||0000-0002-3960-6312
  • Malet, Roger|||0000-0002-8408-6045
  • Oliver Malagelada, Joan|||0000-0002-5641-5729
  • Prim, Alex
  • Mascarell, Denis
  • Salleras, Marc|||0000-0001-8812-8268
  • Fonseca, Luis|||0000-0002-1394-8074
  • Rodríguez Iglesias, Alex|||0000-0001-9055-7424
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
  • Morata, Alex|||0000-0002-3300-4636
  • Baiutti, Federico|||0000-0001-9664-2486
  • Ferrer, Carles|||0000-0002-1475-8790
This paper presents a novel waste-heat-powered, wireless, and battery-less Industrial Internet of Things (IIoT) device designed for predictive maintenance in Industry 4.0 environments. With a focus on real-time quality data, this device addresses the limitations of current battery-operated IIoT devices, such as energy consumption, transmission range, data rate, and constant quality of service. It is specifically developed for heat-intensive industries (e.g., iron and steel, cement, petrochemical, etc.), where self-heating nodes, low-power processing platforms, and industrial sensors align with the stringent requirements of industrial monitoring. The presented IIoT device uses thermoelectric generators based on the Seebeck effect to harness waste heat from any hot surface, such as pipes or chimneys, ensuring continuous power without the need for batteries. The energy that is recovered can be used to power devices using mid-range wireless protocols like Bluetooth 5.0, minimizing the need for extensive in-house wireless infrastructure and incorporating light-edge computing. Consequently, up to 98% of cloud computation efforts and associated greenhouse gas emissions are reduced as data is processed within the IoT device. From the environmental perspective, the deployment of such self-powered IIoT devices contributes to reducing the carbon footprint in energy-demanding industries, aiding their digitalization transition towards the industry 5.0 paradigm. This paper presents the results of the most challenging energy harvesting technologies based on an all-silicon micro thermoelectric generator with planar architecture. The effectiveness and self-powering ability of the selected model, coupled with an ultra-low-power processing platform and Bluetooth 5 connectivity, are validated in an equivalent industrial environment to monitor vibrations in an electric machine. This approach aligns with the EU's strategic objective of achieving net zero manufacturing capacity for renewable energy technologies, enhancing its position as a global leader in renewable energy technology (RET).